leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[WATCHDOG] i6300esb.c: Restructure initialization of the device

Browse Source 
The i6300ESB watchdog should be stopped before userspace has access to the
watchdog. So fix this and restructure the initialization sequence into:
	* See if we have a i6300 device
	* make sure that we have valid module parameters
	* Initialize the device
	* register the /dev/watchdog device so that userspace has access

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Wim Van Sebroeck 2009-03-25 19:16:28 +00:00
parent 31838d9dac
commit fc8a9d830f
1 changed files with 70 additions and 60 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
drivers/watchdog/i6300esb.c
View File

@ -123,7 +123,7 @@ static int esb_timer_start(void)
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
/* Enable or Enable + Lock? */
val = 0x02 | (nowayout ? 0x01 : 0x00);
val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00);
pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
spin_unlock(&esb_lock);
return 0;
@ -143,7 +143,7 @@ static int esb_timer_stop(void)
spin_unlock(&esb_lock);
/* Returns 0 if the timer was disabled, non-zero otherwise */
return val & 0x01;
return val & ESB_WDT_ENABLE;
}
static void esb_timer_keepalive(void)
@ -350,8 +350,6 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
static unsigned char __devinit esb_getdevice(void)
{
u8 val1;
unsigned short val2;
/*
* Find the PCI device
*/
@ -359,7 +357,9 @@ static unsigned char __devinit esb_getdevice(void)
esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_ESB_9, NULL);
if (esb_pci) {
if (!esb_pci)
return 0;
if (pci_enable_device(esb_pci)) {
printk(KERN_ERR PFX "failed to enable device\n");
goto err_devput;
@ -377,15 +377,34 @@ static unsigned char __devinit esb_getdevice(void)
goto err_release;
}
/* Done */
return 1;
err_release:
pci_release_region(esb_pci, 0);
err_disable:
pci_disable_device(esb_pci);
err_devput:
pci_dev_put(esb_pci);
return 0;
}
static void __devinit esb_initdevice(void)
{
u8 val1;
u16 val2;
/*
* Config register:
* Bit 5 : 0 = Enable WDT_OUTPUT
* Bit 2 : 0 = set the timer frequency to the PCI clock
* divided by 2^15 (approx 1KHz).
* Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
* The watchdog has two timers, it can be setup so that the
* expiry of timer1 results in an interrupt and the expiry of
* timer2 results in a reboot. We set it to not generate
* any interrupts as there is not much we can do with it
* right now.
*
* We also enable reboots and set the timer frequency to
* the PCI clock divided by 2^15 (approx 1KHz).
*/
pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
@ -403,21 +422,12 @@ static unsigned char __devinit esb_getdevice(void)
if (val2 & ESB_WDT_TIMEOUT)
triggered = WDIOF_CARDRESET;
/* Reset trigger flag and timers */
/* Reset WDT_TIMEOUT flag and timers */
esb_unlock_registers();
writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
/* Done */
return 1;
err_release:
pci_release_region(esb_pci, 0);
err_disable:
pci_disable_device(esb_pci);
err_devput:
pci_dev_put(esb_pci);
}
return 0;
/* And set the correct timeout value */
esb_timer_set_heartbeat(heartbeat);
}
static int __devinit esb_probe(struct platform_device *dev)
@ -430,13 +440,17 @@ static int __devinit esb_probe(struct platform_device *dev)
/* Check that the heartbeat value is within it's range;
if not reset to the default */
if (esb_timer_set_heartbeat(heartbeat)) {
esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
heartbeat = WATCHDOG_HEARTBEAT;
printk(KERN_INFO PFX
"heartbeat value must be 1<heartbeat<2046, using %d\n",
heartbeat);
}
/* Initialize the watchdog and make sure it does not run */
esb_initdevice();
/* Register the watchdog so that userspace has access to it */
ret = misc_register(&esb_miscdev);
if (ret != 0) {
printk(KERN_ERR PFX
@ -444,7 +458,6 @@ static int __devinit esb_probe(struct platform_device *dev)
WATCHDOG_MINOR, ret);
goto err_unmap;
}
esb_timer_stop();
printk(KERN_INFO PFX
"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
BASEADDR, heartbeat, nowayout);
@ -452,11 +465,8 @@ static int __devinit esb_probe(struct platform_device *dev)
err_unmap:
iounmap(BASEADDR);
/* err_release: */
pci_release_region(esb_pci, 0);
/* err_disable: */
pci_disable_device(esb_pci);
/* err_devput: */
pci_dev_put(esb_pci);
return ret;
}