[MIPS] Atlas: update interrupt handling

The following change updates the Atlas interrupt handling to match that
of Malta.  Tested with a 5Kc and a 34Kf successfully.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Maciej W. Rozycki 2006-09-12 19:12:18 +01:00 committed by Ralf Baechle
parent 3ee24e1b1e
commit fc095a9021
6 changed files with 189 additions and 71 deletions

View File

@ -1,6 +1,8 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 1999, 2000, 2006 MIPS Technologies, Inc.
* All rights reserved.
* Authors: Carsten Langgaard <carstenl@mips.com>
* Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
@ -25,17 +27,20 @@
*/
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <asm/irq.h>
#include <asm/gdb-stub.h>
#include <asm/io.h>
#include <asm/irq_cpu.h>
#include <asm/msc01_ic.h>
#include <asm/mips-boards/atlas.h>
#include <asm/mips-boards/atlasint.h>
#include <asm/gdb-stub.h>
#include <asm/mips-boards/generic.h>
static struct atlas_ictrl_regs *atlas_hw0_icregs;
@ -47,13 +52,13 @@ static struct atlas_ictrl_regs *atlas_hw0_icregs;
void disable_atlas_irq(unsigned int irq_nr)
{
atlas_hw0_icregs->intrsten = (1 << (irq_nr-ATLASINT_BASE));
atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
iob();
}
void enable_atlas_irq(unsigned int irq_nr)
{
atlas_hw0_icregs->intseten = (1 << (irq_nr-ATLASINT_BASE));
atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
iob();
}
@ -107,7 +112,7 @@ static inline void atlas_hw0_irqdispatch(struct pt_regs *regs)
if (unlikely(int_status == 0))
return;
irq = ATLASINT_BASE + ls1bit32(int_status);
irq = ATLAS_INT_BASE + ls1bit32(int_status);
DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
@ -161,15 +166,14 @@ static inline unsigned int irq_ffs(unsigned int pending)
}
/*
* IRQs on the Atlas board look basically (barring software IRQs which we
* don't use at all and all external interrupt sources are combined together
* on hardware interrupt 0 (MIPS IRQ 2)) like:
* IRQs on the Atlas board look basically like (all external interrupt
* sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
*
* MIPS IRQ Source
* MIPS IRQ Source
* -------- ------
* 0 Software (ignored)
* 1 Software (ignored)
* 2 Combined hardware interrupt (hw0)
* 0 Software 0 (reschedule IPI on MT)
* 1 Software 1 (remote call IPI on MT)
* 2 Combined Atlas hardware interrupt (hw0)
* 3 Hardware (ignored)
* 4 Hardware (ignored)
* 5 Hardware (ignored)
@ -179,7 +183,7 @@ static inline unsigned int irq_ffs(unsigned int pending)
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
* Lowest ---- Combined hardware interrupt
* Lowest ---- Software 0
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
@ -193,17 +197,19 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
if (irq == MIPSCPU_INT_ATLAS)
atlas_hw0_irqdispatch(regs);
else if (irq > 0)
else if (irq >= 0)
do_IRQ(MIPSCPU_INT_BASE + irq, regs);
else
spurious_interrupt(regs);
}
void __init arch_init_irq(void)
static inline void init_atlas_irqs (int base)
{
int i;
atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *));
atlas_hw0_icregs = (struct atlas_ictrl_regs *)
ioremap(ATLAS_ICTRL_REGS_BASE,
sizeof(struct atlas_ictrl_regs *));
/*
* Mask out all interrupt by writing "1" to all bit position in
@ -211,7 +217,7 @@ void __init arch_init_irq(void)
*/
atlas_hw0_icregs->intrsten = 0xffffffff;
for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) {
for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
@ -219,3 +225,62 @@ void __init arch_init_irq(void)
spin_lock_init(&irq_desc[i].lock);
}
}
static struct irqaction atlasirq = {
.handler = no_action,
.name = "Atlas cascade"
};
msc_irqmap_t __initdata msc_irqmap[] = {
{MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
};
int __initdata msc_nr_irqs = sizeof(msc_irqmap) / sizeof(*msc_irqmap);
msc_irqmap_t __initdata msc_eicirqmap[] = {
{MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_ATLAS, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
};
int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap) / sizeof(*msc_eicirqmap);
void __init arch_init_irq(void)
{
init_atlas_irqs(ATLAS_INT_BASE);
if (!cpu_has_veic)
mips_cpu_irq_init(MIPSCPU_INT_BASE);
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_24K:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
if (cpu_has_veic)
init_msc_irqs (MSC01E_INT_BASE,
msc_eicirqmap, msc_nr_eicirqs);
else
init_msc_irqs (MSC01C_INT_BASE,
msc_irqmap, msc_nr_irqs);
}
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
setup_irq (MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
} else if (cpu_has_vint) {
set_vi_handler (MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc (MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS,
&atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
#else /* Not SMTC */
setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
#endif /* CONFIG_MIPS_MT_SMTC */
} else
setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
}

View File

@ -77,7 +77,7 @@ static void __init serial_init(void)
#else
s.iobase = ATLAS_UART_REGS_BASE+3;
#endif
s.irq = ATLASINT_UART;
s.irq = ATLAS_INT_UART;
s.uartclk = ATLAS_BASE_BAUD * 16;
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
s.iotype = UPIO_PORT;

View File

@ -41,8 +41,13 @@
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
#ifdef CONFIG_MIPS_ATLAS
#include <asm/mips-boards/atlasint.h>
#endif
#ifdef CONFIG_MIPS_MALTA
#include <asm/mips-boards/maltaint.h>
#include <asm/mc146818-time.h>
#endif
unsigned long cpu_khz;

View File

@ -21,16 +21,16 @@
#include <asm/mips-boards/atlasint.h>
#define PCIA ATLASINT_PCIA
#define PCIB ATLASINT_PCIB
#define PCIC ATLASINT_PCIC
#define PCID ATLASINT_PCID
#define INTA ATLASINT_INTA
#define INTB ATLASINT_INTB
#define ETH ATLASINT_ETH
#define INTC ATLASINT_INTC
#define SCSI ATLASINT_SCSI
#define INTD ATLASINT_INTD
#define PCIA ATLAS_INT_PCIA
#define PCIB ATLAS_INT_PCIB
#define PCIC ATLAS_INT_PCIC
#define PCID ATLAS_INT_PCID
#define INTA ATLAS_INT_INTA
#define INTB ATLAS_INT_INTB
#define ETH ATLAS_INT_ETH
#define INTC ATLAS_INT_INTC
#define SCSI ATLAS_INT_SCSI
#define INTD ATLAS_INT_INTD
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */

View File

@ -33,7 +33,7 @@
#define RTC_PORT(x) (ATLAS_RTC_ADR_REG + (x) * 8)
#define RTC_IO_EXTENT 0x100
#define RTC_IOMAPPED 0
#define RTC_IRQ ATLASINT_RTC
#define RTC_IRQ ATLAS_INT_RTC
static inline unsigned char CMOS_READ(unsigned long addr)
{

View File

@ -1,6 +1,7 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 1999, 2006 MIPS Technologies, Inc. All rights reserved.
* Authors: Carsten Langgaard <carstenl@mips.com>
* Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
@ -25,41 +26,88 @@
#ifndef _MIPS_ATLASINT_H
#define _MIPS_ATLASINT_H
#define ATLASINT_BASE 1
#define ATLASINT_UART (ATLASINT_BASE+0)
#define ATLASINT_TIM0 (ATLASINT_BASE+1)
#define ATLASINT_RES2 (ATLASINT_BASE+2)
#define ATLASINT_RES3 (ATLASINT_BASE+3)
#define ATLASINT_RTC (ATLASINT_BASE+4)
#define ATLASINT_COREHI (ATLASINT_BASE+5)
#define ATLASINT_CORELO (ATLASINT_BASE+6)
#define ATLASINT_RES7 (ATLASINT_BASE+7)
#define ATLASINT_PCIA (ATLASINT_BASE+8)
#define ATLASINT_PCIB (ATLASINT_BASE+9)
#define ATLASINT_PCIC (ATLASINT_BASE+10)
#define ATLASINT_PCID (ATLASINT_BASE+11)
#define ATLASINT_ENUM (ATLASINT_BASE+12)
#define ATLASINT_DEG (ATLASINT_BASE+13)
#define ATLASINT_ATXFAIL (ATLASINT_BASE+14)
#define ATLASINT_INTA (ATLASINT_BASE+15)
#define ATLASINT_INTB (ATLASINT_BASE+16)
#define ATLASINT_ETH ATLASINT_INTB
#define ATLASINT_INTC (ATLASINT_BASE+17)
#define ATLASINT_SCSI ATLASINT_INTC
#define ATLASINT_INTD (ATLASINT_BASE+18)
#define ATLASINT_SERR (ATLASINT_BASE+19)
#define ATLASINT_RES20 (ATLASINT_BASE+20)
#define ATLASINT_RES21 (ATLASINT_BASE+21)
#define ATLASINT_RES22 (ATLASINT_BASE+22)
#define ATLASINT_RES23 (ATLASINT_BASE+23)
#define ATLASINT_RES24 (ATLASINT_BASE+24)
#define ATLASINT_RES25 (ATLASINT_BASE+25)
#define ATLASINT_RES26 (ATLASINT_BASE+26)
#define ATLASINT_RES27 (ATLASINT_BASE+27)
#define ATLASINT_RES28 (ATLASINT_BASE+28)
#define ATLASINT_RES29 (ATLASINT_BASE+29)
#define ATLASINT_RES30 (ATLASINT_BASE+30)
#define ATLASINT_RES31 (ATLASINT_BASE+31)
#define ATLASINT_END (ATLASINT_BASE+31)
/*
* Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
*/
#define MIPSCPU_INT_BASE 0
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#define MIPSCPU_INT_SW1 1
#define MIPSCPU_INT_MB0 2
#define MIPSCPU_INT_ATLAS MIPSCPU_INT_MB0
#define MIPSCPU_INT_MB1 3
#define MIPSCPU_INT_MB2 4
#define MIPSCPU_INT_MB3 5
#define MIPSCPU_INT_MB4 6
#define MIPSCPU_INT_CPUCTR 7
/*
* Interrupts 8..39 are used for Atlas interrupt controller interrupts
*/
#define ATLAS_INT_BASE 8
#define ATLAS_INT_UART (ATLAS_INT_BASE + 0)
#define ATLAS_INT_TIM0 (ATLAS_INT_BASE + 1)
#define ATLAS_INT_RES2 (ATLAS_INT_BASE + 2)
#define ATLAS_INT_RES3 (ATLAS_INT_BASE + 3)
#define ATLAS_INT_RTC (ATLAS_INT_BASE + 4)
#define ATLAS_INT_COREHI (ATLAS_INT_BASE + 5)
#define ATLAS_INT_CORELO (ATLAS_INT_BASE + 6)
#define ATLAS_INT_RES7 (ATLAS_INT_BASE + 7)
#define ATLAS_INT_PCIA (ATLAS_INT_BASE + 8)
#define ATLAS_INT_PCIB (ATLAS_INT_BASE + 9)
#define ATLAS_INT_PCIC (ATLAS_INT_BASE + 10)
#define ATLAS_INT_PCID (ATLAS_INT_BASE + 11)
#define ATLAS_INT_ENUM (ATLAS_INT_BASE + 12)
#define ATLAS_INT_DEG (ATLAS_INT_BASE + 13)
#define ATLAS_INT_ATXFAIL (ATLAS_INT_BASE + 14)
#define ATLAS_INT_INTA (ATLAS_INT_BASE + 15)
#define ATLAS_INT_INTB (ATLAS_INT_BASE + 16)
#define ATLAS_INT_ETH ATLAS_INT_INTB
#define ATLAS_INT_INTC (ATLAS_INT_BASE + 17)
#define ATLAS_INT_SCSI ATLAS_INT_INTC
#define ATLAS_INT_INTD (ATLAS_INT_BASE + 18)
#define ATLAS_INT_SERR (ATLAS_INT_BASE + 19)
#define ATLAS_INT_RES20 (ATLAS_INT_BASE + 20)
#define ATLAS_INT_RES21 (ATLAS_INT_BASE + 21)
#define ATLAS_INT_RES22 (ATLAS_INT_BASE + 22)
#define ATLAS_INT_RES23 (ATLAS_INT_BASE + 23)
#define ATLAS_INT_RES24 (ATLAS_INT_BASE + 24)
#define ATLAS_INT_RES25 (ATLAS_INT_BASE + 25)
#define ATLAS_INT_RES26 (ATLAS_INT_BASE + 26)
#define ATLAS_INT_RES27 (ATLAS_INT_BASE + 27)
#define ATLAS_INT_RES28 (ATLAS_INT_BASE + 28)
#define ATLAS_INT_RES29 (ATLAS_INT_BASE + 29)
#define ATLAS_INT_RES30 (ATLAS_INT_BASE + 30)
#define ATLAS_INT_RES31 (ATLAS_INT_BASE + 31)
#define ATLAS_INT_END (ATLAS_INT_BASE + 31)
/*
* Interrupts 64..127 are used for Soc-it Classic interrupts
*/
#define MSC01C_INT_BASE 64
/* SOC-it Classic interrupt offsets */
#define MSC01C_INT_TMR 0
#define MSC01C_INT_PCI 1
/*
* Interrupts 64..127 are used for Soc-it EIC interrupts
*/
#define MSC01E_INT_BASE 64
/* SOC-it EIC interrupt offsets */
#define MSC01E_INT_SW0 1
#define MSC01E_INT_SW1 2
#define MSC01E_INT_MB0 3
#define MSC01E_INT_ATLAS MSC01E_INT_MB0
#define MSC01E_INT_MB1 4
#define MSC01E_INT_MB2 5
#define MSC01E_INT_MB3 6
#define MSC01E_INT_MB4 7
#define MSC01E_INT_TMR 8
#define MSC01E_INT_PCI 9
#define MSC01E_INT_PERFCTR 10
#define MSC01E_INT_CPUCTR 11
#endif /* !(_MIPS_ATLASINT_H) */