diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 60754fc63981..e50671019122 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -1003,132 +1003,6 @@ enum soc_au1200_ints { #define SYS_RTCMATCH2 (SYS_BASE + 0x54) #define SYS_RTCREAD (SYS_BASE + 0x58) -/* Ethernet Controllers */ - -/* 4 byte offsets from AU1000_ETH_BASE */ -#define MAC_CONTROL 0x0 -# define MAC_RX_ENABLE (1 << 2) -# define MAC_TX_ENABLE (1 << 3) -# define MAC_DEF_CHECK (1 << 5) -# define MAC_SET_BL(X) (((X) & 0x3) << 6) -# define MAC_AUTO_PAD (1 << 8) -# define MAC_DISABLE_RETRY (1 << 10) -# define MAC_DISABLE_BCAST (1 << 11) -# define MAC_LATE_COL (1 << 12) -# define MAC_HASH_MODE (1 << 13) -# define MAC_HASH_ONLY (1 << 15) -# define MAC_PASS_ALL (1 << 16) -# define MAC_INVERSE_FILTER (1 << 17) -# define MAC_PROMISCUOUS (1 << 18) -# define MAC_PASS_ALL_MULTI (1 << 19) -# define MAC_FULL_DUPLEX (1 << 20) -# define MAC_NORMAL_MODE 0 -# define MAC_INT_LOOPBACK (1 << 21) -# define MAC_EXT_LOOPBACK (1 << 22) -# define MAC_DISABLE_RX_OWN (1 << 23) -# define MAC_BIG_ENDIAN (1 << 30) -# define MAC_RX_ALL (1 << 31) -#define MAC_ADDRESS_HIGH 0x4 -#define MAC_ADDRESS_LOW 0x8 -#define MAC_MCAST_HIGH 0xC -#define MAC_MCAST_LOW 0x10 -#define MAC_MII_CNTRL 0x14 -# define MAC_MII_BUSY (1 << 0) -# define MAC_MII_READ 0 -# define MAC_MII_WRITE (1 << 1) -# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) -# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) -#define MAC_MII_DATA 0x18 -#define MAC_FLOW_CNTRL 0x1C -# define MAC_FLOW_CNTRL_BUSY (1 << 0) -# define MAC_FLOW_CNTRL_ENABLE (1 << 1) -# define MAC_PASS_CONTROL (1 << 2) -# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) -#define MAC_VLAN1_TAG 0x20 -#define MAC_VLAN2_TAG 0x24 - -/* Ethernet Controller Enable */ - -# define MAC_EN_CLOCK_ENABLE (1 << 0) -# define MAC_EN_RESET0 (1 << 1) -# define MAC_EN_TOSS (0 << 2) -# define MAC_EN_CACHEABLE (1 << 3) -# define MAC_EN_RESET1 (1 << 4) -# define MAC_EN_RESET2 (1 << 5) -# define MAC_DMA_RESET (1 << 6) - -/* Ethernet Controller DMA Channels */ - -#define MAC0_TX_DMA_ADDR 0xB4004000 -#define MAC1_TX_DMA_ADDR 0xB4004200 -/* offsets from MAC_TX_RING_ADDR address */ -#define MAC_TX_BUFF0_STATUS 0x0 -# define TX_FRAME_ABORTED (1 << 0) -# define TX_JAB_TIMEOUT (1 << 1) -# define TX_NO_CARRIER (1 << 2) -# define TX_LOSS_CARRIER (1 << 3) -# define TX_EXC_DEF (1 << 4) -# define TX_LATE_COLL_ABORT (1 << 5) -# define TX_EXC_COLL (1 << 6) -# define TX_UNDERRUN (1 << 7) -# define TX_DEFERRED (1 << 8) -# define TX_LATE_COLL (1 << 9) -# define TX_COLL_CNT_MASK (0xF << 10) -# define TX_PKT_RETRY (1 << 31) -#define MAC_TX_BUFF0_ADDR 0x4 -# define TX_DMA_ENABLE (1 << 0) -# define TX_T_DONE (1 << 1) -# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) -#define MAC_TX_BUFF0_LEN 0x8 -#define MAC_TX_BUFF1_STATUS 0x10 -#define MAC_TX_BUFF1_ADDR 0x14 -#define MAC_TX_BUFF1_LEN 0x18 -#define MAC_TX_BUFF2_STATUS 0x20 -#define MAC_TX_BUFF2_ADDR 0x24 -#define MAC_TX_BUFF2_LEN 0x28 -#define MAC_TX_BUFF3_STATUS 0x30 -#define MAC_TX_BUFF3_ADDR 0x34 -#define MAC_TX_BUFF3_LEN 0x38 - -#define MAC0_RX_DMA_ADDR 0xB4004100 -#define MAC1_RX_DMA_ADDR 0xB4004300 -/* offsets from MAC_RX_RING_ADDR */ -#define MAC_RX_BUFF0_STATUS 0x0 -# define RX_FRAME_LEN_MASK 0x3fff -# define RX_WDOG_TIMER (1 << 14) -# define RX_RUNT (1 << 15) -# define RX_OVERLEN (1 << 16) -# define RX_COLL (1 << 17) -# define RX_ETHER (1 << 18) -# define RX_MII_ERROR (1 << 19) -# define RX_DRIBBLING (1 << 20) -# define RX_CRC_ERROR (1 << 21) -# define RX_VLAN1 (1 << 22) -# define RX_VLAN2 (1 << 23) -# define RX_LEN_ERROR (1 << 24) -# define RX_CNTRL_FRAME (1 << 25) -# define RX_U_CNTRL_FRAME (1 << 26) -# define RX_MCAST_FRAME (1 << 27) -# define RX_BCAST_FRAME (1 << 28) -# define RX_FILTER_FAIL (1 << 29) -# define RX_PACKET_FILTER (1 << 30) -# define RX_MISSED_FRAME (1 << 31) - -# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ - RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ - RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) -#define MAC_RX_BUFF0_ADDR 0x4 -# define RX_DMA_ENABLE (1 << 0) -# define RX_T_DONE (1 << 1) -# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) -# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) -#define MAC_RX_BUFF1_STATUS 0x10 -#define MAC_RX_BUFF1_ADDR 0x14 -#define MAC_RX_BUFF2_STATUS 0x20 -#define MAC_RX_BUFF2_ADDR 0x24 -#define MAC_RX_BUFF3_STATUS 0x30 -#define MAC_RX_BUFF3_ADDR 0x34 - /* * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index a78e4c136959..ad8b058c8068 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -89,6 +89,124 @@ MODULE_DESCRIPTION(DRV_DESC); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +/* AU1000 MAC registers and bits */ +#define MAC_CONTROL 0x0 +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_AUTO_PAD (1 << 8) +# define MAC_DISABLE_RETRY (1 << 10) +# define MAC_DISABLE_BCAST (1 << 11) +# define MAC_LATE_COL (1 << 12) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) +# define MAC_PASS_ALL (1 << 16) +# define MAC_INVERSE_FILTER (1 << 17) +# define MAC_PROMISCUOUS (1 << 18) +# define MAC_PASS_ALL_MULTI (1 << 19) +# define MAC_FULL_DUPLEX (1 << 20) +# define MAC_NORMAL_MODE 0 +# define MAC_INT_LOOPBACK (1 << 21) +# define MAC_EXT_LOOPBACK (1 << 22) +# define MAC_DISABLE_RX_OWN (1 << 23) +# define MAC_BIG_ENDIAN (1 << 30) +# define MAC_RX_ALL (1 << 31) +#define MAC_ADDRESS_HIGH 0x4 +#define MAC_ADDRESS_LOW 0x8 +#define MAC_MCAST_HIGH 0xC +#define MAC_MCAST_LOW 0x10 +#define MAC_MII_CNTRL 0x14 +# define MAC_MII_BUSY (1 << 0) +# define MAC_MII_READ 0 +# define MAC_MII_WRITE (1 << 1) +# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) +# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) +#define MAC_MII_DATA 0x18 +#define MAC_FLOW_CNTRL 0x1C +# define MAC_FLOW_CNTRL_BUSY (1 << 0) +# define MAC_FLOW_CNTRL_ENABLE (1 << 1) +# define MAC_PASS_CONTROL (1 << 2) +# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) +#define MAC_VLAN1_TAG 0x20 +#define MAC_VLAN2_TAG 0x24 + +/* Ethernet Controller Enable */ +# define MAC_EN_CLOCK_ENABLE (1 << 0) +# define MAC_EN_RESET0 (1 << 1) +# define MAC_EN_TOSS (0 << 2) +# define MAC_EN_CACHEABLE (1 << 3) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) + +/* Ethernet Controller DMA Channels */ +/* offsets from MAC_TX_RING_ADDR address */ +#define MAC_TX_BUFF0_STATUS 0x0 +# define TX_FRAME_ABORTED (1 << 0) +# define TX_JAB_TIMEOUT (1 << 1) +# define TX_NO_CARRIER (1 << 2) +# define TX_LOSS_CARRIER (1 << 3) +# define TX_EXC_DEF (1 << 4) +# define TX_LATE_COLL_ABORT (1 << 5) +# define TX_EXC_COLL (1 << 6) +# define TX_UNDERRUN (1 << 7) +# define TX_DEFERRED (1 << 8) +# define TX_LATE_COLL (1 << 9) +# define TX_COLL_CNT_MASK (0xF << 10) +# define TX_PKT_RETRY (1 << 31) +#define MAC_TX_BUFF0_ADDR 0x4 +# define TX_DMA_ENABLE (1 << 0) +# define TX_T_DONE (1 << 1) +# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +#define MAC_TX_BUFF0_LEN 0x8 +#define MAC_TX_BUFF1_STATUS 0x10 +#define MAC_TX_BUFF1_ADDR 0x14 +#define MAC_TX_BUFF1_LEN 0x18 +#define MAC_TX_BUFF2_STATUS 0x20 +#define MAC_TX_BUFF2_ADDR 0x24 +#define MAC_TX_BUFF2_LEN 0x28 +#define MAC_TX_BUFF3_STATUS 0x30 +#define MAC_TX_BUFF3_ADDR 0x34 +#define MAC_TX_BUFF3_LEN 0x38 + +/* offsets from MAC_RX_RING_ADDR */ +#define MAC_RX_BUFF0_STATUS 0x0 +# define RX_FRAME_LEN_MASK 0x3fff +# define RX_WDOG_TIMER (1 << 14) +# define RX_RUNT (1 << 15) +# define RX_OVERLEN (1 << 16) +# define RX_COLL (1 << 17) +# define RX_ETHER (1 << 18) +# define RX_MII_ERROR (1 << 19) +# define RX_DRIBBLING (1 << 20) +# define RX_CRC_ERROR (1 << 21) +# define RX_VLAN1 (1 << 22) +# define RX_VLAN2 (1 << 23) +# define RX_LEN_ERROR (1 << 24) +# define RX_CNTRL_FRAME (1 << 25) +# define RX_U_CNTRL_FRAME (1 << 26) +# define RX_MCAST_FRAME (1 << 27) +# define RX_BCAST_FRAME (1 << 28) +# define RX_FILTER_FAIL (1 << 29) +# define RX_PACKET_FILTER (1 << 30) +# define RX_MISSED_FRAME (1 << 31) + +# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ + RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ + RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) +#define MAC_RX_BUFF0_ADDR 0x4 +# define RX_DMA_ENABLE (1 << 0) +# define RX_T_DONE (1 << 1) +# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) +#define MAC_RX_BUFF1_STATUS 0x10 +#define MAC_RX_BUFF1_ADDR 0x14 +#define MAC_RX_BUFF2_STATUS 0x20 +#define MAC_RX_BUFF2_ADDR 0x24 +#define MAC_RX_BUFF3_STATUS 0x30 +#define MAC_RX_BUFF3_ADDR 0x34 + /* * Theory of operation *