forked from Minki/linux
ARM: dts: Add board dts file for exynos3250-rinato
This patch adds support for device tree source for Samsung Rinato board (Gear 2) based on Exynos3250 SoC. This dts file support following features: - eMMC - Main PMIC (Samsung S2MPS14) - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) - RTC of Exynos3250 - ADC of Exynos3250 with NTC thermistor - I2S of Exynos3250 - TMU of Exynos3250 - MFC of Exynos3250 - Secure firmware for Exynos3250 secondary cpu boot - Serial ports of Exynos3250 - gpio-key for power key Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Chanwoo Choi
Kukjin Kim
parent
e540920cf2
commit
faaf348ef4
@ -67,7 +67,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
|
||||
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
|
||||
da850-evm.dtb
|
||||
dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
|
||||
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
|
||||
dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \
|
||||
exynos4210-origen.dtb \
|
||||
exynos4210-smdkv310.dtb \
|
||||
exynos4210-trats.dtb \
|
||||
exynos4210-universal_c210.dtb \
|
||||
|
||||
424
arch/arm/boot/dts/exynos3250-rinato.dts
Normal file
424
arch/arm/boot/dts/exynos3250-rinato.dts
Normal file
@ -0,0 +1,424 @@
|
||||
/*
|
||||
* Samsung's Exynos3250 based Rinato board device tree source
|
||||
*
|
||||
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Device tree source file for Samsung's Rinato board which is based on
|
||||
* Samsung Exynos3250 SoC.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "exynos3250.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Samsung Rinato board";
|
||||
compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
|
||||
|
||||
aliases {
|
||||
i2c7 = &i2c_max77836;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x1ff00000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p15 rootwait earlyprintk panic=5";
|
||||
};
|
||||
|
||||
firmware@0205F000 {
|
||||
compatible = "samsung,secure-firmware";
|
||||
reg = <0x0205F000 0x1000>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
power_key {
|
||||
interrupt-parent = <&gpx2>;
|
||||
interrupts = <7 0>;
|
||||
gpios = <&gpx2 7 1>;
|
||||
linux,code = <KEY_POWER>;
|
||||
label = "power key";
|
||||
debounce-interval = <10>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_max77836: i2c-gpio-0 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&gpd0 2 0>, <&gpd0 3 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
max77836: subpmic@25 {
|
||||
compatible = "maxim,max77836";
|
||||
interrupt-parent = <&gpx1>;
|
||||
interrupts = <5 0>;
|
||||
reg = <0x25>;
|
||||
wakeup;
|
||||
|
||||
muic: max77836-muic {
|
||||
compatible = "maxim,max77836-muic";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "maxim,max77836-regulator";
|
||||
safeout_reg: SAFEOUT {
|
||||
regulator-name = "SAFEOUT";
|
||||
};
|
||||
|
||||
charger_reg: CHARGER {
|
||||
regulator-name = "CHARGER";
|
||||
regulator-min-microamp = <45000>;
|
||||
regulator-max-microamp = <475000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
motor_reg: LDO1 {
|
||||
regulator-name = "MOT_2.7V";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
LDO2 {
|
||||
regulator-name = "UNUSED_LDO2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3950000>;
|
||||
};
|
||||
};
|
||||
|
||||
charger {
|
||||
compatible = "maxim,max77836-charger";
|
||||
|
||||
maxim,constant-uvolt = <4350000>;
|
||||
maxim,fast-charge-uamp = <225000>;
|
||||
maxim,eoc-uamp = <7500>;
|
||||
maxim,ovp-uvolt = <6500000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
vdd-supply = <&ldo3_reg>;
|
||||
status = "okay";
|
||||
assigned-clocks = <&cmu CLK_SCLK_TSADC>;
|
||||
assigned-clock-rates = <6000000>;
|
||||
|
||||
thermistor-ap {
|
||||
compatible = "ntc,ncp15wb473";
|
||||
pullup-uv = <1800000>;
|
||||
pullup-ohm = <100000>;
|
||||
pulldown-ohm = <100000>;
|
||||
io-channels = <&adc 0>;
|
||||
};
|
||||
|
||||
thermistor-battery {
|
||||
compatible = "ntc,ncp15wb473";
|
||||
pullup-uv = <1800000>;
|
||||
pullup-ohm = <100000>;
|
||||
pulldown-ohm = <100000>;
|
||||
io-channels = <&adc 1>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
samsung,i2c-max-bus-freq = <100000>;
|
||||
status = "okay";
|
||||
|
||||
s2mps14_pmic@66 {
|
||||
compatible = "samsung,s2mps14-pmic";
|
||||
interrupt-parent = <&gpx0>;
|
||||
interrupts = <7 0>;
|
||||
reg = <0x66>;
|
||||
wakeup;
|
||||
|
||||
s2mps14_osc: clocks {
|
||||
compatible = "samsung,s2mps14-clk";
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "s2mps14_ap", "unused",
|
||||
"s2mps14_bt";
|
||||
};
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VAP_ALIVE_1.0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "VAP_M1_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "VCC_AP_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: LDO4 {
|
||||
regulator-name = "VAP_AVDD_PLL1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "VAP_PLL_ISO_1.0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "VAP_VMIPI_1.0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "VAP_AVDD_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo8_reg: LDO8 {
|
||||
regulator-name = "VAP_USB_3.0V";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo9_reg: LDO9 {
|
||||
regulator-name = "V_LPDDR_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo10_reg: LDO10 {
|
||||
regulator-name = "UNUSED_LDO10";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
ldo11_reg: LDO11 {
|
||||
regulator-name = "V_EMMC_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
samsung,ext-control-gpios = <&gpk0 2 0>;
|
||||
};
|
||||
|
||||
ldo12_reg: LDO12 {
|
||||
regulator-name = "V_EMMC_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
samsung,ext-control-gpios = <&gpk0 2 0>;
|
||||
};
|
||||
|
||||
ldo13_reg: LDO13 {
|
||||
regulator-name = "CAM_AVDD_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo14_reg: LDO14 {
|
||||
regulator-name = "UNUSED_LDO14";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
ldo15_reg: LDO15 {
|
||||
regulator-name = "TSP_AVDD_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo16_reg: LDO16 {
|
||||
regulator-name = "LCD_VDD_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo17_reg: LDO17 {
|
||||
regulator-name = "V_IRLED_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo18_reg: LDO18 {
|
||||
regulator-name = "CAM_AF_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo19_reg: LDO19 {
|
||||
regulator-name = "TSP_VDD_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo20_reg: LDO20 {
|
||||
regulator-name = "LCD_VDD_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo21_reg: LDO21 {
|
||||
regulator-name = "CAM_IO_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo22_reg: LDO22 {
|
||||
regulator-name = "CAM_DVDD_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
ldo23_reg: LDO23 {
|
||||
regulator-name = "HRM_VCC_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo24_reg: LDO24 {
|
||||
regulator-name = "HRM_VCC_3.3V";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
ldo25_reg: LDO25 {
|
||||
regulator-name = "UNUSED_LDO25";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "VAP_MIF_1.0V";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "VAP_ARM_1.0V";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "VAP_INT3D_1.0V";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "VCC_SUB_1.95V";
|
||||
regulator-min-microvolt = <1950000>;
|
||||
regulator-max-microvolt = <1950000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "VCC_SUB_1.35V";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
samsung,i2c-max-bus-freq = <400000>;
|
||||
status = "okay";
|
||||
|
||||
fuelgauge@36 {
|
||||
compatible = "maxim,max77836-battery";
|
||||
interrupt-parent = <&gpx1>;
|
||||
interrupts = <2 8>;
|
||||
reg = <0x36>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mfc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mshc_0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
num-slots = <1>;
|
||||
broken-cd;
|
||||
non-removable;
|
||||
cap-mmc-highspeed;
|
||||
desc-num = <4>;
|
||||
mmc-hs200-1_8v;
|
||||
card-detect-delay = <200>;
|
||||
vmmc-supply = <&ldo12_reg>;
|
||||
clock-frequency = <100000000>;
|
||||
clock-freq-min-max = <400000 100000000>;
|
||||
samsung,dw-mshc-ciu-div = <1>;
|
||||
samsung,dw-mshc-sdr-timing = <0 1>;
|
||||
samsung,dw-mshc-ddr-timing = <1 2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial_0 {
|
||||
assigned-clocks = <&cmu CLK_SCLK_UART0>;
|
||||
assigned-clock-rates = <100000000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tmu {
|
||||
vtmu-supply = <&ldo7_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
|
||||
clock-names = "rtc", "rtc_src";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xusbxti {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user