leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[media] em28xx-i2c: fix coding style of multi line comments

Browse Source 
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Frank Schaefer 2013-03-24 17:09:59 -03:00 committed by Mauro Carvalho Chehab
parent d230d5ad0b
commit fa74aca3a3
1 changed files with 34 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

52
drivers/media/usb/em28xx/em28xx-i2c.c
View File

@ -171,8 +171,10 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
if (len < 1 || len > 64)
return -EOPNOTSUPP;
/* NOTE: limited by the USB ctrl message constraints
* Zero length reads always succeed, even if no device is connected */
/*
* NOTE: limited by the USB ctrl message constraints
* Zero length reads always succeed, even if no device is connected
*/
/* Write to i2c device */
ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
@ -202,9 +204,11 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
return ret;
}
msleep(5);
/* NOTE: do we really have to wait for success ?
Never seen anything else than 0x00 or 0x10
(even with high payload) ... */
/*
* NOTE: do we really have to wait for success ?
* Never seen anything else than 0x00 or 0x10
* (even with high payload) ...
*/
}
em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
return -EIO;
@ -220,8 +224,10 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
if (len < 1 || len > 64)
return -EOPNOTSUPP;
/* NOTE: limited by the USB ctrl message constraints
* Zero length reads always succeed, even if no device is connected */
/*
* NOTE: limited by the USB ctrl message constraints
* Zero length reads always succeed, even if no device is connected
*/
/* Read data from i2c device */
ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
@ -230,7 +236,8 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
addr, ret);
return ret;
}
/* NOTE: some devices with two i2c busses have the bad habit to return 0
/*
* NOTE: some devices with two i2c busses have the bad habit to return 0
* bytes if we are on bus B AND there was no write attempt to the
* specified slave address before AND no device is present at the
* requested slave address.
@ -366,9 +373,10 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
return num;
}
/* based on linux/sunrpc/svcauth.h and linux/hash.h
/*
* based on linux/sunrpc/svcauth.h and linux/hash.h
* The original hash function returns a different value, if arch is x86_64
* or i386.
* or i386.
*/
static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
{
@ -391,8 +399,10 @@ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
return (hash >> (32 - bits)) & 0xffffffffUL;
}
/* Helper function to read data blocks from i2c clients with 8 or 16 bit
* address width, 8 bit register width and auto incrementation been activated */
/*
* Helper function to read data blocks from i2c clients with 8 or 16 bit
* address width, 8 bit register width and auto incrementation been activated
*/
static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr,
bool addr_w16, u16 len, u8 *data)
{
@ -434,9 +444,11 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
u8 **eedata, u16 *eedata_len)
{
const u16 len = 256;
/* FIXME common length/size for bytes to read, to display, hash
/*
* FIXME common length/size for bytes to read, to display, hash
* calculation and returned device dataset. Simplifies the code a lot,
* but we might have to deal with multiple sizes in the future ! */
* but we might have to deal with multiple sizes in the future !
*/
int i, err;
struct em28xx_eeprom *dev_config;
u8 buf, *data;
@ -497,7 +509,8 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
em28xx_info("EEPROM info:\n");
em28xx_info("\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n",
mc_start, data[2]);
/* boot configuration (address 0x0002):
/*
* boot configuration (address 0x0002):
* [0] microcode download speed: 1 = 400 kHz; 0 = 100 kHz
* [1] always selects 12 kb RAM
* [2] USB device speed: 1 = force Full Speed; 0 = auto detect
@ -506,8 +519,10 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
* characterization
*/
/* Read hardware config dataset offset from address
* (microcode start + 46) */
/*
* Read hardware config dataset offset from address
* (microcode start + 46)
*/
err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2,
data);
if (err != 2) {
@ -520,7 +535,8 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
hwconf_offset = mc_start + data[0] + (data[1] << 8);
/* Read hardware config dataset */
/* NOTE: the microcode copy can be multiple pages long, but
/*
* NOTE: the microcode copy can be multiple pages long, but
* we assume the hardware config dataset is the same as in
* the old eeprom and not longer than 256 bytes.
* tveeprom is currently also limited to 256 bytes.