dt-bindings: display: convert samsung,ld9040 to DT Schema
v2: - drop use of spi-slave.yaml (Maxime) - added unevaluatedProperties (Maxime) - added type to width/height properties (Rob) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-23-sam@ravnborg.org
This commit is contained in:
Sam Ravnborg
@@ -1,66 +0,0 @@
|
|||||||
Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
|
|
||||||
|
|
||||||
Required properties:
|
|
||||||
- compatible: "samsung,ld9040"
|
|
||||||
- reg: address of the panel on SPI bus
|
|
||||||
- vdd3-supply: core voltage supply
|
|
||||||
- vci-supply: voltage supply for analog circuits
|
|
||||||
- reset-gpios: a GPIO spec for the reset pin
|
|
||||||
- display-timings: timings for the connected panel according to [1]
|
|
||||||
|
|
||||||
The panel must obey rules for SPI slave device specified in document [2].
|
|
||||||
|
|
||||||
Optional properties:
|
|
||||||
- power-on-delay: delay after turning regulators on [ms]
|
|
||||||
- reset-delay: delay after reset sequence [ms]
|
|
||||||
- panel-width-mm: physical panel width [mm]
|
|
||||||
- panel-height-mm: physical panel height [mm]
|
|
||||||
|
|
||||||
The device node can contain one 'port' child node with one child
|
|
||||||
'endpoint' node, according to the bindings defined in [3]. This
|
|
||||||
node should describe panel's video bus.
|
|
||||||
|
|
||||||
[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
|
|
||||||
[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
||||||
[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
||||||
|
|
||||||
Example:
|
|
||||||
|
|
||||||
lcd@0 {
|
|
||||||
compatible = "samsung,ld9040";
|
|
||||||
reg = <0>;
|
|
||||||
vdd3-supply = <&ldo7_reg>;
|
|
||||||
vci-supply = <&ldo17_reg>;
|
|
||||||
reset-gpios = <&gpy4 5 0>;
|
|
||||||
spi-max-frequency = <1200000>;
|
|
||||||
spi-cpol;
|
|
||||||
spi-cpha;
|
|
||||||
power-on-delay = <10>;
|
|
||||||
reset-delay = <10>;
|
|
||||||
panel-width-mm = <90>;
|
|
||||||
panel-height-mm = <154>;
|
|
||||||
|
|
||||||
display-timings {
|
|
||||||
timing {
|
|
||||||
clock-frequency = <23492370>;
|
|
||||||
hactive = <480>;
|
|
||||||
vactive = <800>;
|
|
||||||
hback-porch = <16>;
|
|
||||||
hfront-porch = <16>;
|
|
||||||
vback-porch = <2>;
|
|
||||||
vfront-porch = <28>;
|
|
||||||
hsync-len = <2>;
|
|
||||||
vsync-len = <1>;
|
|
||||||
hsync-active = <0>;
|
|
||||||
vsync-active = <0>;
|
|
||||||
de-active = <0>;
|
|
||||||
pixelclk-active = <0>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
port {
|
|
||||||
lcd_ep: endpoint {
|
|
||||||
remote-endpoint = <&fimd_dpi_ep>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
@@ -0,0 +1,107 @@
|
|||||||
|
# SPDX-License-Identifier: GPL-2.0
|
||||||
|
%YAML 1.2
|
||||||
|
---
|
||||||
|
$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml#
|
||||||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
|
||||||
|
title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
|
||||||
|
|
||||||
|
description: |
|
||||||
|
The panel must obey the rules for a SPI slave device as specified in
|
||||||
|
spi/spi-controller.yaml
|
||||||
|
|
||||||
|
maintainers:
|
||||||
|
- Andrzej Hajda <a.hajda@samsung.com>
|
||||||
|
|
||||||
|
allOf:
|
||||||
|
- $ref: panel-common.yaml#
|
||||||
|
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
const: samsung,ld9040
|
||||||
|
|
||||||
|
display-timings: true
|
||||||
|
port: true
|
||||||
|
reg: true
|
||||||
|
reset-gpios: true
|
||||||
|
|
||||||
|
vdd3-supply:
|
||||||
|
description: core voltage supply
|
||||||
|
|
||||||
|
vci-supply:
|
||||||
|
description: voltage supply for analog circuits
|
||||||
|
|
||||||
|
power-on-delay:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: delay after turning regulators on [ms]
|
||||||
|
|
||||||
|
reset-delay:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: delay after reset sequence [ms]
|
||||||
|
|
||||||
|
panel-width-mm:
|
||||||
|
description: physical panel width [mm]
|
||||||
|
|
||||||
|
panel-height-mm:
|
||||||
|
description: physical panel height [mm]
|
||||||
|
|
||||||
|
required:
|
||||||
|
- compatible
|
||||||
|
- reg
|
||||||
|
- vdd3-supply
|
||||||
|
- vci-supply
|
||||||
|
- reset-gpios
|
||||||
|
- display-timings
|
||||||
|
|
||||||
|
unevaluatedProperties: false
|
||||||
|
|
||||||
|
examples:
|
||||||
|
- |
|
||||||
|
spi {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
lcd@0 {
|
||||||
|
compatible = "samsung,ld9040";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
reg = <0>;
|
||||||
|
vdd3-supply = <&ldo7_reg>;
|
||||||
|
vci-supply = <&ldo17_reg>;
|
||||||
|
reset-gpios = <&gpy4 5 0>;
|
||||||
|
spi-max-frequency = <1200000>;
|
||||||
|
spi-cpol;
|
||||||
|
spi-cpha;
|
||||||
|
power-on-delay = <10>;
|
||||||
|
reset-delay = <10>;
|
||||||
|
panel-width-mm = <90>;
|
||||||
|
panel-height-mm = <154>;
|
||||||
|
|
||||||
|
display-timings {
|
||||||
|
timing {
|
||||||
|
clock-frequency = <23492370>;
|
||||||
|
hactive = <480>;
|
||||||
|
vactive = <800>;
|
||||||
|
hback-porch = <16>;
|
||||||
|
hfront-porch = <16>;
|
||||||
|
vback-porch = <2>;
|
||||||
|
vfront-porch = <28>;
|
||||||
|
hsync-len = <2>;
|
||||||
|
vsync-len = <1>;
|
||||||
|
hsync-active = <0>;
|
||||||
|
vsync-active = <0>;
|
||||||
|
de-active = <0>;
|
||||||
|
pixelclk-active = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
port {
|
||||||
|
lcd_ep: endpoint {
|
||||||
|
remote-endpoint = <&fimd_dpi_ep>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
...
|
||||||
Reference in New Issue
Block a user