usb: dwc2: move debugfs code to a separate file

Prepare to add more debug code. Moreover, don't save dentry * for
each file in struct dwc2_hsotg as clean up is done with
debugfs_remove_recursive(). s3c_hsotg_delete_debug() is removed
altogether for the same reason.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Mian Yousaf Kaukab 2015-04-29 22:08:59 +02:00 committed by Felipe Balbi
parent b189a21172
commit f91eea447a
6 changed files with 456 additions and 407 deletions

View File

@ -13,6 +13,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
dwc2-y += gadget.o
endif
ifneq ($(CONFIG_DEBUG_FS),)
dwc2-y += debugfs.o
endif
# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
# this location and renamed gadget.c. When building for dynamically linked
# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role

View File

@ -615,9 +615,6 @@ struct dwc2_hsotg {
enum dwc2_lx_state lx_state;
struct dentry *debug_root;
struct dentry *debug_file;
struct dentry *debug_testmode;
struct dentry *debug_fifo;
/* DWC OTG HW Release versions */
#define DWC2_CORE_REV_2_71a 0x4f54271a
@ -1005,6 +1002,7 @@ extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset);
extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg);
extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2);
extern int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
#else
static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2)
{ return 0; }
@ -1018,6 +1016,9 @@ static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset) {}
static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
static inline int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
int testmode)
{ return 0; }
#endif
#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)

27
drivers/usb/dwc2/debug.h Normal file
View File

@ -0,0 +1,27 @@
/**
* debug.h - Designware USB2 DRD controller debug header
*
* Copyright (C) 2015 Intel Corporation
* Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "core.h"
#ifdef CONFIG_DEBUG_FS
extern int dwc2_debugfs_init(struct dwc2_hsotg *);
extern void dwc2_debugfs_exit(struct dwc2_hsotg *);
#else
static inline int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
{ return 0; }
static inline void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
{ }
#endif

416
drivers/usb/dwc2/debugfs.c Normal file
View File

@ -0,0 +1,416 @@
/**
* debugfs.c - Designware USB2 DRD controller debugfs
*
* Copyright (C) 2015 Intel Corporation
* Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/spinlock.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include "core.h"
#include "debug.h"
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
/**
* testmode_write - debugfs: change usb test mode
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry modify the current usb test mode.
*/
static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
struct dwc2_hsotg *hsotg = s->private;
unsigned long flags;
u32 testmode = 0;
char buf[32];
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
if (!strncmp(buf, "test_j", 6))
testmode = TEST_J;
else if (!strncmp(buf, "test_k", 6))
testmode = TEST_K;
else if (!strncmp(buf, "test_se0_nak", 12))
testmode = TEST_SE0_NAK;
else if (!strncmp(buf, "test_packet", 11))
testmode = TEST_PACKET;
else if (!strncmp(buf, "test_force_enable", 17))
testmode = TEST_FORCE_EN;
else
testmode = 0;
spin_lock_irqsave(&hsotg->lock, flags);
s3c_hsotg_set_test_mode(hsotg, testmode);
spin_unlock_irqrestore(&hsotg->lock, flags);
return count;
}
/**
* testmode_show - debugfs: show usb test mode state
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry shows which usb test mode is currently enabled.
*/
static int testmode_show(struct seq_file *s, void *unused)
{
struct dwc2_hsotg *hsotg = s->private;
unsigned long flags;
int dctl;
spin_lock_irqsave(&hsotg->lock, flags);
dctl = readl(hsotg->regs + DCTL);
dctl &= DCTL_TSTCTL_MASK;
dctl >>= DCTL_TSTCTL_SHIFT;
spin_unlock_irqrestore(&hsotg->lock, flags);
switch (dctl) {
case 0:
seq_puts(s, "no test\n");
break;
case TEST_J:
seq_puts(s, "test_j\n");
break;
case TEST_K:
seq_puts(s, "test_k\n");
break;
case TEST_SE0_NAK:
seq_puts(s, "test_se0_nak\n");
break;
case TEST_PACKET:
seq_puts(s, "test_packet\n");
break;
case TEST_FORCE_EN:
seq_puts(s, "test_force_enable\n");
break;
default:
seq_printf(s, "UNKNOWN %d\n", dctl);
}
return 0;
}
static int testmode_open(struct inode *inode, struct file *file)
{
return single_open(file, testmode_show, inode->i_private);
}
static const struct file_operations testmode_fops = {
.owner = THIS_MODULE,
.open = testmode_open,
.write = testmode_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* state_show - debugfs: show overall driver and device state.
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry shows the overall state of the hardware and
* some general information about each of the endpoints available
* to the system.
*/
static int state_show(struct seq_file *seq, void *v)
{
struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
int idx;
seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
readl(regs + DCFG),
readl(regs + DCTL),
readl(regs + DSTS));
seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
readl(regs + DIEPMSK), readl(regs + DOEPMSK));
seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
readl(regs + GINTMSK),
readl(regs + GINTSTS));
seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
readl(regs + DAINTMSK),
readl(regs + DAINT));
seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
readl(regs + GNPTXSTS),
readl(regs + GRXSTSR));
seq_puts(seq, "\nEndpoint status:\n");
for (idx = 0; idx < hsotg->num_of_eps; idx++) {
u32 in, out;
in = readl(regs + DIEPCTL(idx));
out = readl(regs + DOEPCTL(idx));
seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
idx, in, out);
in = readl(regs + DIEPTSIZ(idx));
out = readl(regs + DOEPTSIZ(idx));
seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
in, out);
seq_puts(seq, "\n");
}
return 0;
}
static int state_open(struct inode *inode, struct file *file)
{
return single_open(file, state_show, inode->i_private);
}
static const struct file_operations state_fops = {
.owner = THIS_MODULE,
.open = state_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* fifo_show - debugfs: show the fifo information
* @seq: The seq_file to write data to.
* @v: Unused parameter.
*
* Show the FIFO information for the overall fifo and all the
* periodic transmission FIFOs.
*/
static int fifo_show(struct seq_file *seq, void *v)
{
struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
u32 val;
int idx;
seq_puts(seq, "Non-periodic FIFOs:\n");
seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
val = readl(regs + GNPTXFSIZ);
seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
val >> FIFOSIZE_DEPTH_SHIFT,
val & FIFOSIZE_DEPTH_MASK);
seq_puts(seq, "\nPeriodic TXFIFOs:\n");
for (idx = 1; idx < hsotg->num_of_eps; idx++) {
val = readl(regs + DPTXFSIZN(idx));
seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
val >> FIFOSIZE_DEPTH_SHIFT,
val & FIFOSIZE_STARTADDR_MASK);
}
return 0;
}
static int fifo_open(struct inode *inode, struct file *file)
{
return single_open(file, fifo_show, inode->i_private);
}
static const struct file_operations fifo_fops = {
.owner = THIS_MODULE,
.open = fifo_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static const char *decode_direction(int is_in)
{
return is_in ? "in" : "out";
}
/**
* ep_show - debugfs: show the state of an endpoint.
* @seq: The seq_file to write data to.
* @v: Unused parameter.
*
* This debugfs entry shows the state of the given endpoint (one is
* registered for each available).
*/
static int ep_show(struct seq_file *seq, void *v)
{
struct s3c_hsotg_ep *ep = seq->private;
struct dwc2_hsotg *hsotg = ep->parent;
struct s3c_hsotg_req *req;
void __iomem *regs = hsotg->regs;
int index = ep->index;
int show_limit = 15;
unsigned long flags;
seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
ep->index, ep->ep.name, decode_direction(ep->dir_in));
/* first show the register state */
seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
readl(regs + DIEPCTL(index)),
readl(regs + DOEPCTL(index)));
seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
readl(regs + DIEPDMA(index)),
readl(regs + DOEPDMA(index)));
seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
readl(regs + DIEPINT(index)),
readl(regs + DOEPINT(index)));
seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
readl(regs + DIEPTSIZ(index)),
readl(regs + DOEPTSIZ(index)));
seq_puts(seq, "\n");
seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
seq_printf(seq, "total_data=%ld\n", ep->total_data);
seq_printf(seq, "request list (%p,%p):\n",
ep->queue.next, ep->queue.prev);
spin_lock_irqsave(&hsotg->lock, flags);
list_for_each_entry(req, &ep->queue, queue) {
if (--show_limit < 0) {
seq_puts(seq, "not showing more requests...\n");
break;
}
seq_printf(seq, "%c req %p: %d bytes @%p, ",
req == ep->req ? '*' : ' ',
req, req->req.length, req->req.buf);
seq_printf(seq, "%d done, res %d\n",
req->req.actual, req->req.status);
}
spin_unlock_irqrestore(&hsotg->lock, flags);
return 0;
}
static int ep_open(struct inode *inode, struct file *file)
{
return single_open(file, ep_show, inode->i_private);
}
static const struct file_operations ep_fops = {
.owner = THIS_MODULE,
.open = ep_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* s3c_hsotg_create_debug - create debugfs directory and files
* @hsotg: The driver state
*
* Create the debugfs files to allow the user to get information
* about the state of the system. The directory name is created
* with the same name as the device itself, in case we end up
* with multiple blocks in future systems.
*/
static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
{
struct dentry *root;
struct dentry *file;
unsigned epidx;
root = hsotg->debug_root;
/* create general state file */
file = debugfs_create_file("state", S_IRUGO, root, hsotg, &state_fops);
if (IS_ERR(file))
dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, hsotg,
&testmode_fops);
if (IS_ERR(file))
dev_err(hsotg->dev, "%s: failed to create testmode\n",
__func__);
file = debugfs_create_file("fifo", S_IRUGO, root, hsotg, &fifo_fops);
if (IS_ERR(file))
dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
/* Create one file for each out endpoint */
for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
struct s3c_hsotg_ep *ep;
ep = hsotg->eps_out[epidx];
if (ep) {
file = debugfs_create_file(ep->name, S_IRUGO,
root, ep, &ep_fops);
if (IS_ERR(file))
dev_err(hsotg->dev, "failed to create %s debug file\n",
ep->name);
}
}
/* Create one file for each in endpoint. EP0 is handled with out eps */
for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
struct s3c_hsotg_ep *ep;
ep = hsotg->eps_in[epidx];
if (ep) {
file = debugfs_create_file(ep->name, S_IRUGO,
root, ep, &ep_fops);
if (IS_ERR(file))
dev_err(hsotg->dev, "failed to create %s debug file\n",
ep->name);
}
}
}
#else
static inline void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) {}
#endif
/* s3c_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */
int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
{
int ret;
hsotg->debug_root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
if (!hsotg->debug_root) {
ret = -ENOMEM;
goto err0;
}
/* Add gadget debugfs nodes */
s3c_hsotg_create_debug(hsotg);
err0:
return ret;
}
EXPORT_SYMBOL_GPL(dwc2_debugfs_init);
void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
{
debugfs_remove_recursive(hsotg->debug_root);
hsotg->debug_root = NULL;
}
EXPORT_SYMBOL_GPL(dwc2_debugfs_exit);

View File

@ -20,7 +20,6 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/delay.h>
@ -35,7 +34,6 @@
#include <linux/usb/gadget.h>
#include <linux/usb/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/uaccess.h>
#include "core.h"
#include "hw.h"
@ -894,7 +892,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg,
* @testmode: requested usb test mode
* Enable usb Test Mode requested by the Host.
*/
static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
{
int dctl = readl(hsotg->regs + DCTL);
@ -3391,404 +3389,6 @@ static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg)
#endif
}
/**
* testmode_write - debugfs: change usb test mode
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry modify the current usb test mode.
*/
static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
struct dwc2_hsotg *hsotg = s->private;
unsigned long flags;
u32 testmode = 0;
char buf[32];
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
if (!strncmp(buf, "test_j", 6))
testmode = TEST_J;
else if (!strncmp(buf, "test_k", 6))
testmode = TEST_K;
else if (!strncmp(buf, "test_se0_nak", 12))
testmode = TEST_SE0_NAK;
else if (!strncmp(buf, "test_packet", 11))
testmode = TEST_PACKET;
else if (!strncmp(buf, "test_force_enable", 17))
testmode = TEST_FORCE_EN;
else
testmode = 0;
spin_lock_irqsave(&hsotg->lock, flags);
s3c_hsotg_set_test_mode(hsotg, testmode);
spin_unlock_irqrestore(&hsotg->lock, flags);
return count;
}
/**
* testmode_show - debugfs: show usb test mode state
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry shows which usb test mode is currently enabled.
*/
static int testmode_show(struct seq_file *s, void *unused)
{
struct dwc2_hsotg *hsotg = s->private;
unsigned long flags;
int dctl;
spin_lock_irqsave(&hsotg->lock, flags);
dctl = readl(hsotg->regs + DCTL);
dctl &= DCTL_TSTCTL_MASK;
dctl >>= DCTL_TSTCTL_SHIFT;
spin_unlock_irqrestore(&hsotg->lock, flags);
switch (dctl) {
case 0:
seq_puts(s, "no test\n");
break;
case TEST_J:
seq_puts(s, "test_j\n");
break;
case TEST_K:
seq_puts(s, "test_k\n");
break;
case TEST_SE0_NAK:
seq_puts(s, "test_se0_nak\n");
break;
case TEST_PACKET:
seq_puts(s, "test_packet\n");
break;
case TEST_FORCE_EN:
seq_puts(s, "test_force_enable\n");
break;
default:
seq_printf(s, "UNKNOWN %d\n", dctl);
}
return 0;
}
static int testmode_open(struct inode *inode, struct file *file)
{
return single_open(file, testmode_show, inode->i_private);
}
static const struct file_operations testmode_fops = {
.owner = THIS_MODULE,
.open = testmode_open,
.write = testmode_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* state_show - debugfs: show overall driver and device state.
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry shows the overall state of the hardware and
* some general information about each of the endpoints available
* to the system.
*/
static int state_show(struct seq_file *seq, void *v)
{
struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
int idx;
seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
readl(regs + DCFG),
readl(regs + DCTL),
readl(regs + DSTS));
seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
readl(regs + DIEPMSK), readl(regs + DOEPMSK));
seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
readl(regs + GINTMSK),
readl(regs + GINTSTS));
seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
readl(regs + DAINTMSK),
readl(regs + DAINT));
seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
readl(regs + GNPTXSTS),
readl(regs + GRXSTSR));
seq_puts(seq, "\nEndpoint status:\n");
for (idx = 0; idx < hsotg->num_of_eps; idx++) {
u32 in, out;
in = readl(regs + DIEPCTL(idx));
out = readl(regs + DOEPCTL(idx));
seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
idx, in, out);
in = readl(regs + DIEPTSIZ(idx));
out = readl(regs + DOEPTSIZ(idx));
seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
in, out);
seq_puts(seq, "\n");
}
return 0;
}
static int state_open(struct inode *inode, struct file *file)
{
return single_open(file, state_show, inode->i_private);
}
static const struct file_operations state_fops = {
.owner = THIS_MODULE,
.open = state_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* fifo_show - debugfs: show the fifo information
* @seq: The seq_file to write data to.
* @v: Unused parameter.
*
* Show the FIFO information for the overall fifo and all the
* periodic transmission FIFOs.
*/
static int fifo_show(struct seq_file *seq, void *v)
{
struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
u32 val;
int idx;
seq_puts(seq, "Non-periodic FIFOs:\n");
seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
val = readl(regs + GNPTXFSIZ);
seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
val >> FIFOSIZE_DEPTH_SHIFT,
val & FIFOSIZE_DEPTH_MASK);
seq_puts(seq, "\nPeriodic TXFIFOs:\n");
for (idx = 1; idx < hsotg->num_of_eps; idx++) {
val = readl(regs + DPTXFSIZN(idx));
seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
val >> FIFOSIZE_DEPTH_SHIFT,
val & FIFOSIZE_STARTADDR_MASK);
}
return 0;
}
static int fifo_open(struct inode *inode, struct file *file)
{
return single_open(file, fifo_show, inode->i_private);
}
static const struct file_operations fifo_fops = {
.owner = THIS_MODULE,
.open = fifo_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static const char *decode_direction(int is_in)
{
return is_in ? "in" : "out";
}
/**
* ep_show - debugfs: show the state of an endpoint.
* @seq: The seq_file to write data to.
* @v: Unused parameter.
*
* This debugfs entry shows the state of the given endpoint (one is
* registered for each available).
*/
static int ep_show(struct seq_file *seq, void *v)
{
struct s3c_hsotg_ep *ep = seq->private;
struct dwc2_hsotg *hsotg = ep->parent;
struct s3c_hsotg_req *req;
void __iomem *regs = hsotg->regs;
int index = ep->index;
int show_limit = 15;
unsigned long flags;
seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
ep->index, ep->ep.name, decode_direction(ep->dir_in));
/* first show the register state */
seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
readl(regs + DIEPCTL(index)),
readl(regs + DOEPCTL(index)));
seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
readl(regs + DIEPDMA(index)),
readl(regs + DOEPDMA(index)));
seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
readl(regs + DIEPINT(index)),
readl(regs + DOEPINT(index)));
seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
readl(regs + DIEPTSIZ(index)),
readl(regs + DOEPTSIZ(index)));
seq_puts(seq, "\n");
seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
seq_printf(seq, "total_data=%ld\n", ep->total_data);
seq_printf(seq, "request list (%p,%p):\n",
ep->queue.next, ep->queue.prev);
spin_lock_irqsave(&hsotg->lock, flags);
list_for_each_entry(req, &ep->queue, queue) {
if (--show_limit < 0) {
seq_puts(seq, "not showing more requests...\n");
break;
}
seq_printf(seq, "%c req %p: %d bytes @%p, ",
req == ep->req ? '*' : ' ',
req, req->req.length, req->req.buf);
seq_printf(seq, "%d done, res %d\n",
req->req.actual, req->req.status);
}
spin_unlock_irqrestore(&hsotg->lock, flags);
return 0;
}
static int ep_open(struct inode *inode, struct file *file)
{
return single_open(file, ep_show, inode->i_private);
}
static const struct file_operations ep_fops = {
.owner = THIS_MODULE,
.open = ep_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* s3c_hsotg_create_debug - create debugfs directory and files
* @hsotg: The driver state
*
* Create the debugfs files to allow the user to get information
* about the state of the system. The directory name is created
* with the same name as the device itself, in case we end up
* with multiple blocks in future systems.
*/
static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
{
struct dentry *root;
unsigned epidx;
root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
hsotg->debug_root = root;
if (IS_ERR(root)) {
dev_err(hsotg->dev, "cannot create debug root\n");
return;
}
/* create general state file */
hsotg->debug_file = debugfs_create_file("state", S_IRUGO, root,
hsotg, &state_fops);
if (IS_ERR(hsotg->debug_file))
dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
hsotg->debug_testmode = debugfs_create_file("testmode",
S_IRUGO | S_IWUSR, root,
hsotg, &testmode_fops);
if (IS_ERR(hsotg->debug_testmode))
dev_err(hsotg->dev, "%s: failed to create testmode\n",
__func__);
hsotg->debug_fifo = debugfs_create_file("fifo", S_IRUGO, root,
hsotg, &fifo_fops);
if (IS_ERR(hsotg->debug_fifo))
dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
/* Create one file for each out endpoint */
for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
struct s3c_hsotg_ep *ep;
ep = hsotg->eps_out[epidx];
if (ep) {
ep->debugfs = debugfs_create_file(ep->name, S_IRUGO,
root, ep, &ep_fops);
if (IS_ERR(ep->debugfs))
dev_err(hsotg->dev, "failed to create %s debug file\n",
ep->name);
}
}
/* Create one file for each in endpoint. EP0 is handled with out eps */
for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
struct s3c_hsotg_ep *ep;
ep = hsotg->eps_in[epidx];
if (ep) {
ep->debugfs = debugfs_create_file(ep->name, S_IRUGO,
root, ep, &ep_fops);
if (IS_ERR(ep->debugfs))
dev_err(hsotg->dev, "failed to create %s debug file\n",
ep->name);
}
}
}
/**
* s3c_hsotg_delete_debug - cleanup debugfs entries
* @hsotg: The driver state
*
* Cleanup (remove) the debugfs files for use on module exit.
*/
static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg)
{
unsigned epidx;
for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
if (hsotg->eps_in[epidx])
debugfs_remove(hsotg->eps_in[epidx]->debugfs);
if (hsotg->eps_out[epidx])
debugfs_remove(hsotg->eps_out[epidx]->debugfs);
}
debugfs_remove(hsotg->debug_file);
debugfs_remove(hsotg->debug_testmode);
debugfs_remove(hsotg->debug_fifo);
debugfs_remove(hsotg->debug_root);
}
#ifdef CONFIG_OF
static void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg)
{
@ -4028,8 +3628,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
if (ret)
goto err_supplies;
s3c_hsotg_create_debug(hsotg);
s3c_hsotg_dump(hsotg);
return 0;
@ -4050,7 +3648,6 @@ EXPORT_SYMBOL_GPL(dwc2_gadget_init);
int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
{
usb_del_gadget_udc(&hsotg->gadget);
s3c_hsotg_delete_debug(hsotg);
clk_disable_unprepare(hsotg->clk);
return 0;

View File

@ -47,6 +47,7 @@
#include "core.h"
#include "hcd.h"
#include "debug.h"
static const char dwc2_driver_name[] = "dwc2";
@ -121,6 +122,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
if (hsotg->gadget_enabled)
@ -256,6 +258,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
platform_set_drvdata(dev, hsotg);
dwc2_debugfs_init(hsotg);
return retval;
}