Thermal control updates for 5.19-rc1

- Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano, Jiapeng Chong). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Clean up _OSC handling in int340x (Davidlohr Bueso). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary). - Add new k3 j72xx bangdap driver and the corresponding bindings (Keerthy). - Fix missing of_node_put() in the SC iMX driver at probe time (Miaoqian Lin). - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang). - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson). - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das). - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe). - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun). - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu Pallikunhi). - Fix non-negative value support by preventing the value to be clamp to zero (Stefan Wahren). - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov). - Add hwmon support for K3 driver (Massimiliano Minella). - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash). - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar). - Remove NULL check after container_of() call from the Intel HFI thermal driver (Haowen Bai). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKL3MESHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxgzsQAKj4D0ROHLdqReYeIutS7IU6YQ+ejh3N krcAZvxQd8B3sVwSHHABPdsHwwfYjP4BwoHHVtha5q+5zFGBq5F3fJHsDeRxN23T NEOW81HBaLu81N5gNuAYg+NQcdqBR4U4IGKZfxWRyx13OMECXGtJRb/SIW/TuDYk AQIrqOivVEsVRtn+qp+x0rKHsj6ge+2lU1OyJagr2BDhgLrwzxl6cmNBfali1C3D sw4SqGwGVjEB0QDDpMbty9BsLEjNRE86kwoPh2u0K9dT9/b/P9pk1lp+pOnltspZ eOdwr0CtoEHw2x5tuhbO7fmvNIuf5jgSDWsCrP/xYnsozcRiwWsgyeJj4f5soreN kTJB8S/FH+fd7UuYqdmDIeJpDnkkGt1jIqjkDvfJNL7ffBWIe/meXKF4vBnrdlbd FMNQwzgc5eug07IFjOE43V1v5Hw1H1leVUwZczOMGNIhqyy0WZyQr7vzwbr16jCO x0hu3q3Y++5SUAUy9WzsOOrpRHa9JxUwVhZuLG7ajf+6pqPxB8kqs9CJe+sgWKju T4KqHbljJ2Gnkm9SngT0BdnB+AgparhXf8/8Mj0ZBQvamXw+ylNbYfG7qTZk5Ne/ rUf4YDew6hGDqikyJBe2e0a1lLSoN4zaADC1lLYhC+Zp7m6eK0r3y3mhic0bZe1c RU/2eeA4kTuZ =3ltV -----END PGP SIGNATURE----- Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These add a thermal library and thermal tools to wrap the netlink interface into event-based callbacks, improve overheat condition handling during suspend-to-idle on Intel SoCs, add some new hardware support, fix bugs and clean up code. Specifics: - Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano, Jiapeng Chong). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Clean up _OSC handling in int340x (Davidlohr Bueso). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary). - Add new k3 j72xx bangdap driver and the corresponding bindings (Keerthy). - Fix missing of_node_put() in the SC iMX driver at probe time (Miaoqian Lin). - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang). - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson). - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das). - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe). - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun). - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu Pallikunhi). - Fix non-negative value support by preventing the value to be clamp to zero (Stefan Wahren). - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov). - Add hwmon support for K3 driver (Massimiliano Minella). - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash). - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar). - Remove NULL check after container_of() call from the Intel HFI thermal driver (Haowen Bai)" * tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits) thermal: intel: pch: improve the cooling delay log thermal: intel: pch: enhance overheat handling thermal: intel: pch: move cooling delay to suspend_noirq phase PM: wakeup: expose pm_wakeup_pending to modules thermal: k3_j72xx_bandgap: Add the bandgap driver support dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe thermal/core: Fix memory leak in __thermal_cooling_device_register() dt-bindings: thermal: tsens: Add sc8280xp compatible dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible thermal/drivers/qcom/lmh: Add sc8180x compatible thermal/drivers/rz2gl: Fix OTP Calibration Register values dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings thermal: thermal_of: fix typo on __thermal_bind_params tools/thermal: remove unneeded semicolon tools/lib/thermal: remove unneeded semicolon thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe tools/thermal: Add thermal daemon skeleton tools/thermal: Add a temperature capture tool tools/thermal: Add util library ...
2022-05-24 16:19:30 -07:00 · 2022-05-24 16:19:30 -07:00 · f4fb859665
commit f4fb859665
parent 09583dfed2 bbb544f334
59 changed files with 4231 additions and 102 deletions
--- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
@ -18,6 +18,7 @@ description:
 properties:
  compatible:
    enum:
+      - qcom,sc8180x-lmh
      - qcom,sdm845-lmh
      - qcom,sm8150-lmh

--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@ -10,7 +10,9 @@ maintainers:

 properties:
  compatible:
-    const: qcom,spmi-adc-tm5
+    enum:
+      - qcom,spmi-adc-tm5
+      - qcom,spmi-adc-tm5-gen2

  reg:
    maxItems: 1
@ -33,6 +35,7 @@ properties:
  qcom,avg-samples:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: Number of samples to be used for measurement.
+            Not applicable for Gen2 ADC_TM peripheral.
    enum:
      - 1
      - 2
@ -45,6 +48,7 @@ properties:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: This parameter is used to decrease ADC sampling rate.
            Quicker measurements can be made by reducing decimation ratio.
+            Not applicable for Gen2 ADC_TM peripheral.
    enum:
      - 250
      - 420
@ -93,6 +97,29 @@ patternProperties:
          - const: 1
          - enum: [ 1, 3, 4, 6, 20, 8, 10 ]

+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Number of samples to be used for measurement.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 1
+          - 2
+          - 4
+          - 8
+          - 16
+        default: 1
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: This parameter is used to decrease ADC sampling rate.
+          Quicker measurements can be made by reducing decimation ratio.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 85
+          - 340
+          - 1360
+        default: 1360
+
    required:
      - reg
      - io-channels
@ -100,6 +127,31 @@ patternProperties:
    additionalProperties:
      false

+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5
+
+    then:
+      patternProperties:
+        "^([-a-z0-9]*)@[0-7]$":
+          properties:
+            qcom,decimation: false
+            qcom,avg-samples: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5-gen2
+
+    then:
+      properties:
+        qcom,avg-samples: false
+        qcom,decimation: false
+
 required:
  - compatible
  - reg
@ -124,7 +176,7 @@ examples:
            #size-cells = <0>;
            #io-channel-cells = <1>;

-            /* Other propreties are omitted */
+            /* Other properties are omitted */
            conn-therm@4f {
                reg = <ADC5_AMUX_THM3_100K_PU>;
                qcom,ratiometric;
@ -148,4 +200,58 @@ examples:
            };
        };
    };
+
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmk8350_vadc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            xo-therm@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+
+            conn-therm@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        pmk8350_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm5-gen2";
+            reg = <0x3400>;
+            interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmk8350-xo-therm@0 {
+                reg = <0>;
+                io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,decimation = <340>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+
+            conn-therm@1 {
+                reg = <1>;
+                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,avg-samples = <2>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
 ...
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@ -19,10 +19,11 @@ description: |
 properties:
  compatible:
    oneOf:
-      - description: msm9860 TSENS based
+      - description: msm8960 TSENS based
        items:
          - enum:
              - qcom,ipq8064-tsens
+              - qcom,msm8960-tsens

      - description: v0.1 of TSENS
        items:
@ -49,6 +50,7 @@ properties:
              - qcom,sc7180-tsens
              - qcom,sc7280-tsens
              - qcom,sc8180x-tsens
+              - qcom,sc8280xp-tsens
              - qcom,sdm630-tsens
              - qcom,sdm845-tsens
              - qcom,sm8150-tsens
@ -116,6 +118,7 @@ allOf:
              - qcom,ipq8064-tsens
              - qcom,mdm9607-tsens
              - qcom,msm8916-tsens
+              - qcom,msm8960-tsens
              - qcom,msm8974-tsens
              - qcom,msm8976-tsens
              - qcom,qcs404-tsens
--- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@ -17,7 +17,9 @@ properties:
  compatible:
    items:
      - enum:
+          - renesas,r9a07g043-tsu # RZ/G2UL
          - renesas,r9a07g044-tsu # RZ/G2{L,LC}
+          - renesas,r9a07g054-tsu # RZ/V2L
      - const: renesas,rzg2l-tsu

  reg:
--- a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J72XX VTM (DTS) binding
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-vtm
+      - ti,j7200-vtm
+
+  reg:
+    items:
+      - description: VTM cfg1 register space
+      - description: VTM cfg2 register space
+      - description: VTM efuse register space
+
+  power-domains:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    wkup_vtm0: thermal-sensor@42040000 {
+        compatible = "ti,j721e-vtm";
+        reg = <0x42040000 0x350>,
+              <0x42050000 0x350>,
+              <0x43000300 0x10>;
+        power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu_thermal: mpu-thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&wkup_vtm0 0>;
+
+        trips {
+            mpu_crit: mpu-crit {
+                temperature = <125000>; /* milliCelsius */
+                hysteresis = <2000>; /* milliCelsius */
+                type = "critical";
+            };
+        };
+    };
+...
--- a/1
+++ b/1
@ -19589,6 +19589,7 @@ F:	drivers/thermal/
 F:	include/linux/cpu_cooling.h
 F:	include/linux/thermal.h
 F:	include/uapi/linux/thermal.h
+F:	tools/lib/thermal/
 F:	tools/thermal/

 THERMAL DRIVER FOR AMLOGIC SOCS
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@ -930,6 +930,7 @@ bool pm_wakeup_pending(void)

 	return ret || atomic_read(&pm_abort_suspend) > 0;
 }
+EXPORT_SYMBOL_GPL(pm_wakeup_pending);

 void pm_system_wakeup(void)
 {
--- a/drivers/iio/adc/qcom-vadc-common.c
+++ b/drivers/iio/adc/qcom-vadc-common.c
@ -677,6 +677,17 @@ u16 qcom_adc_tm5_temp_volt_scale(unsigned int prescale_ratio,
 }
 EXPORT_SYMBOL(qcom_adc_tm5_temp_volt_scale);

+u16 qcom_adc_tm5_gen2_temp_res_scale(int temp)
+{
+	int64_t resistance;
+
+	resistance = qcom_vadc_map_temp_voltage(adcmap7_100k,
+		ARRAY_SIZE(adcmap7_100k), temp);
+
+	return div64_s64(resistance * RATIO_MAX_ADC7, resistance + R_PU_100K);
+}
+EXPORT_SYMBOL(qcom_adc_tm5_gen2_temp_res_scale);
+
 int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
 		    unsigned int prescale_ratio,
 		    const struct adc5_data *data,
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@ -28,7 +28,7 @@ thermal_sys-$(CONFIG_CPU_IDLE_THERMAL)	+= cpuidle_cooling.o
 # devfreq cooling
 thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o

-obj-$(CONFIG_K3_THERMAL)	+= k3_bandgap.o
+obj-$(CONFIG_K3_THERMAL)	+= k3_bandgap.o k3_j72xx_bandgap.o
 # platform thermal drivers
 obj-y				+= broadcom/
 obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
--- a/drivers/thermal/broadcom/bcm2711_thermal.c
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
@ -38,7 +38,6 @@ static int bcm2711_get_temp(void *data, int *temp)
 	int offset = thermal_zone_get_offset(priv->thermal);
 	u32 val;
 	int ret;
-	long t;

 	ret = regmap_read(priv->regmap, AVS_RO_TEMP_STATUS, &val);
 	if (ret)
@ -50,9 +49,7 @@ static int bcm2711_get_temp(void *data, int *temp)
 	val &= AVS_RO_TEMP_STATUS_DATA_MSK;

 	/* Convert a HW code to a temperature reading (millidegree celsius) */
-	t = slope * val + offset;
-
-	*temp = t < 0 ? 0 : t;
+	*temp = slope * val + offset;

 	return 0;
 }
--- a/drivers/thermal/broadcom/sr-thermal.c
+++ b/drivers/thermal/broadcom/sr-thermal.c
@ -60,6 +60,9 @@ static int sr_thermal_probe(struct platform_device *pdev)
 		return -ENOMEM;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
 	sr_thermal->regs = (void __iomem *)devm_memremap(&pdev->dev, res->start,
 							 resource_size(res),
 							 MEMREMAP_WB);
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@ -359,22 +359,29 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
 	struct device *dev = df->dev.parent;
 	struct devfreq_cooling_device *dfc;
 	struct em_perf_domain *em;
+	struct thermal_cooling_device_ops *ops;
 	char *name;
 	int err, num_opps;

-	dfc = kzalloc(sizeof(*dfc), GFP_KERNEL);
-	if (!dfc)
+	ops = kmemdup(&devfreq_cooling_ops, sizeof(*ops), GFP_KERNEL);
+	if (!ops)
 		return ERR_PTR(-ENOMEM);

+	dfc = kzalloc(sizeof(*dfc), GFP_KERNEL);
+	if (!dfc) {
+		err = -ENOMEM;
+		goto free_ops;
+	}
+
 	dfc->devfreq = df;

 	em = em_pd_get(dev);
 	if (em && !em_is_artificial(em)) {
 		dfc->em_pd = em;
-		devfreq_cooling_ops.get_requested_power =
+		ops->get_requested_power =
 			devfreq_cooling_get_requested_power;
-		devfreq_cooling_ops.state2power = devfreq_cooling_state2power;
-		devfreq_cooling_ops.power2state = devfreq_cooling_power2state;
+		ops->state2power = devfreq_cooling_state2power;
+		ops->power2state = devfreq_cooling_power2state;

 		dfc->power_ops = dfc_power;

@ -409,8 +416,7 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
 	if (!name)
 		goto remove_qos_req;

-	cdev = thermal_of_cooling_device_register(np, name, dfc,
-						  &devfreq_cooling_ops);
+	cdev = thermal_of_cooling_device_register(np, name, dfc, ops);
 	kfree(name);

 	if (IS_ERR(cdev)) {
@ -431,6 +437,8 @@ free_table:
 	kfree(dfc->freq_table);
 free_dfc:
 	kfree(dfc);
+free_ops:
+	kfree(ops);

 	return ERR_PTR(err);
 }
@ -512,11 +520,13 @@ EXPORT_SYMBOL_GPL(devfreq_cooling_em_register);
 void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {
 	struct devfreq_cooling_device *dfc;
+	const struct thermal_cooling_device_ops *ops;
 	struct device *dev;

 	if (IS_ERR_OR_NULL(cdev))
 		return;

+	ops = cdev->ops;
 	dfc = cdev->devdata;
 	dev = dfc->devfreq->dev.parent;

@ -527,5 +537,6 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)

 	kfree(dfc->freq_table);
 	kfree(dfc);
+	kfree(ops);
 }
 EXPORT_SYMBOL_GPL(devfreq_cooling_unregister);
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@ -629,7 +629,6 @@ static int hisi_thermal_remove(struct platform_device *pdev)
 	return 0;
 }

-#ifdef CONFIG_PM_SLEEP
 static int hisi_thermal_suspend(struct device *dev)
 {
 	struct hisi_thermal_data *data = dev_get_drvdata(dev);
@ -651,15 +650,14 @@ static int hisi_thermal_resume(struct device *dev)

 	return ret;
 }
-#endif

-static SIMPLE_DEV_PM_OPS(hisi_thermal_pm_ops,
+static DEFINE_SIMPLE_DEV_PM_OPS(hisi_thermal_pm_ops,
 			 hisi_thermal_suspend, hisi_thermal_resume);

 static struct platform_driver hisi_thermal_driver = {
 	.driver = {
 		.name		= "hisi_thermal",
-		.pm		= &hisi_thermal_pm_ops,
+		.pm		= pm_sleep_ptr(&hisi_thermal_pm_ops),
 		.of_match_table = of_hisi_thermal_match,
 	},
 	.probe	= hisi_thermal_probe,
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@ -94,8 +94,8 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 		sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
 		if (!sensor) {
 			of_node_put(child);
-			of_node_put(sensor_np);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto put_node;
 		}

 		ret = thermal_zone_of_get_sensor_id(child,
@ -124,7 +124,9 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
 	}

+put_node:
 	of_node_put(sensor_np);
+	of_node_put(np);

 	return ret;
 }
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@ -169,28 +169,25 @@ static int int3400_thermal_run_osc(acpi_handle handle, char *uuid_str, int *enab
 	acpi_status status;
 	int result = 0;
 	struct acpi_osc_context context = {
-		.uuid_str = NULL,
+		.uuid_str = uuid_str,
 		.rev = 1,
 		.cap.length = 8,
+		.cap.pointer = buf,
 	};

-	context.uuid_str = uuid_str;
-
 	buf[OSC_QUERY_DWORD] = 0;
 	buf[OSC_SUPPORT_DWORD] = *enable;

-	context.cap.pointer = buf;
-
 	status = acpi_run_osc(handle, &context);
 	if (ACPI_SUCCESS(status)) {
 		ret = *((u32 *)(context.ret.pointer + 4));
 		if (ret != *enable)
 			result = -EPERM;
+
+		kfree(context.ret.pointer);
 	} else
 		result = -EPERM;

-	kfree(context.ret.pointer);
-
 	return result;
 }

@ -524,21 +521,18 @@ static void int3400_setup_gddv(struct int3400_thermal_priv *priv)

 	obj = buffer.pointer;
 	if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 1
-	    || obj->package.elements[0].type != ACPI_TYPE_BUFFER) {
-		kfree(buffer.pointer);
-		return;
-	}
+	    || obj->package.elements[0].type != ACPI_TYPE_BUFFER)
+		goto out_free;

 	priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer,
 				   obj->package.elements[0].buffer.length,
 				   GFP_KERNEL);
-	if (!priv->data_vault) {
-		kfree(buffer.pointer);
-		return;
-	}
+	if (!priv->data_vault)
+		goto out_free;

 	bin_attr_data_vault.private = priv->data_vault;
 	bin_attr_data_vault.size = obj->package.elements[0].buffer.length;
+out_free:
 	kfree(buffer.pointer);
 }

--- a/drivers/thermal/intel/intel_hfi.c
+++ b/drivers/thermal/intel/intel_hfi.c
@ -243,8 +243,6 @@ static void hfi_update_work_fn(struct work_struct *work)

 	hfi_instance = container_of(to_delayed_work(work), struct hfi_instance,
 				    update_work);
-	if (!hfi_instance)
-		return;

 	update_capabilities(hfi_instance);
 }
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@ -70,8 +70,8 @@ static unsigned int delay_timeout = 100;
 module_param(delay_timeout, int, 0644);
 MODULE_PARM_DESC(delay_timeout, "amount of time delay for each iteration.");

-/* Number of iterations for cooling delay, 10 counts by default for now */
-static unsigned int delay_cnt = 10;
+/* Number of iterations for cooling delay, 600 counts by default for now */
+static unsigned int delay_cnt = 600;
 module_param(delay_cnt, int, 0644);
 MODULE_PARM_DESC(delay_cnt, "total number of iterations for time delay.");

@ -193,10 +193,11 @@ static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp)
 	return 0;
 }

+/* Cool the PCH when it's overheat in .suspend_noirq phase */
 static int pch_wpt_suspend(struct pch_thermal_device *ptd)
 {
 	u8 tsel;
-	u8 pch_delay_cnt = 1;
+	int pch_delay_cnt = 0;
 	u16 pch_thr_temp, pch_cur_temp;

 	/* Shutdown the thermal sensor if it is not enabled by BIOS */
@ -232,26 +233,38 @@ static int pch_wpt_suspend(struct pch_thermal_device *ptd)
 	 * temperature stays above threshold, notify the warning message
 	 * which helps to indentify the reason why S0ix entry was rejected.
 	 */
-	while (pch_delay_cnt <= delay_cnt) {
-		if (pch_cur_temp <= pch_thr_temp)
+	while (pch_delay_cnt < delay_cnt) {
+		if (pch_cur_temp < pch_thr_temp)
 			break;

-		dev_warn(&ptd->pdev->dev,
+		if (pm_wakeup_pending()) {
+			dev_warn(&ptd->pdev->dev, "Wakeup event detected, abort cooling\n");
+			return 0;
+		}
+
+		pch_delay_cnt++;
+		dev_dbg(&ptd->pdev->dev,
 			"CPU-PCH current temp [%dC] higher than the threshold temp [%dC], sleep %d times for %d ms duration\n",
 			pch_cur_temp, pch_thr_temp, pch_delay_cnt, delay_timeout);
 		msleep(delay_timeout);
 		/* Read the PCH current temperature for next cycle. */
 		pch_cur_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP));
-		pch_delay_cnt++;
 	}

-	if (pch_cur_temp > pch_thr_temp)
+	if (pch_cur_temp >= pch_thr_temp)
 		dev_warn(&ptd->pdev->dev,
-			"CPU-PCH is hot [%dC] even after delay, continue to suspend. S0ix might fail\n",
-			pch_cur_temp);
-	else
-		dev_info(&ptd->pdev->dev,
-			"CPU-PCH is cool [%dC], continue to suspend\n", pch_cur_temp);
+			"CPU-PCH is hot [%dC] after %d ms delay. S0ix might fail\n",
+			pch_cur_temp, pch_delay_cnt * delay_timeout);
+	else {
+		if (pch_delay_cnt)
+			dev_info(&ptd->pdev->dev,
+				"CPU-PCH is cool [%dC] after %d ms delay\n",
+				pch_cur_temp, pch_delay_cnt * delay_timeout);
+		else
+			dev_info(&ptd->pdev->dev,
+				"CPU-PCH is cool [%dC]\n",
+				pch_cur_temp);
+	}

 	return 0;
 }
@ -455,7 +468,7 @@ static void intel_pch_thermal_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }

-static int intel_pch_thermal_suspend(struct device *device)
+static int intel_pch_thermal_suspend_noirq(struct device *device)
 {
 	struct pch_thermal_device *ptd = dev_get_drvdata(device);

@ -495,7 +508,7 @@ static const struct pci_device_id intel_pch_thermal_id[] = {
 MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);

 static const struct dev_pm_ops intel_pch_pm_ops = {
-	.suspend = intel_pch_thermal_suspend,
+	.suspend_noirq = intel_pch_thermal_suspend_noirq,
 	.resume = intel_pch_thermal_resume,
 };

--- a/drivers/thermal/k3_bandgap.c
+++ b/drivers/thermal/k3_bandgap.c
@ -16,6 +16,8 @@
 #include <linux/thermal.h>
 #include <linux/types.h>

+#include "thermal_hwmon.h"
+
 #define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
 #define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
 #define K3_VTM_TMPSENS0_CTRL_OFFSET	0x80
@ -219,6 +221,9 @@ static int k3_bandgap_probe(struct platform_device *pdev)
 			ret = PTR_ERR(data[id].tzd);
 			goto err_alloc;
 		}
+
+		if (devm_thermal_add_hwmon_sysfs(data[id].tzd))
+			dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
 	}

 	platform_set_drvdata(pdev, bgp);
--- a/drivers/thermal/k3_j72xx_bandgap.c
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@ -0,0 +1,566 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI Bandgap temperature sensor driver for J72XX SoC Family
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/math.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/thermal.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
+#define K3_VTM_TMPSENS0_CTRL_OFFSET		0x300
+#define K3_VTM_MISC_CTRL_OFFSET			0xc
+#define K3_VTM_TMPSENS_STAT_OFFSET		0x8
+#define K3_VTM_ANYMAXT_OUTRG_ALERT_EN		0x1
+#define K3_VTM_MISC_CTRL2_OFFSET		0x10
+#define K3_VTM_TS_STAT_DTEMP_MASK		0x3ff
+#define K3_VTM_MAX_NUM_TS			8
+#define K3_VTM_TMPSENS_CTRL_SOC			BIT(5)
+#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
+#define K3_VTM_TMPSENS_CTRL_CLKON_REQ		BIT(7)
+#define K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN	BIT(11)
+
+#define K3_VTM_CORRECTION_TEMP_CNT		3
+
+#define MINUS40CREF				5
+#define PLUS30CREF				253
+#define PLUS125CREF				730
+#define PLUS150CREF				940
+
+#define TABLE_SIZE				1024
+#define MAX_TEMP				123000
+#define COOL_DOWN_TEMP				105000
+
+#define FACTORS_REDUCTION			13
+static int *derived_table;
+
+static int compute_value(int index, const s64 *factors, int nr_factors,
+			 int reduction)
+{
+	s64 value = 0;
+	int i;
+
+	for (i = 0; i < nr_factors; i++)
+		value += factors[i] * int_pow(index, i);
+
+	return (int)div64_s64(value, int_pow(10, reduction));
+}
+
+static void init_table(int factors_size, int *table, const s64 *factors)
+{
+	int i;
+
+	for (i = 0; i < TABLE_SIZE; i++)
+		table[i] = compute_value(i, factors, factors_size,
+					 FACTORS_REDUCTION);
+}
+
+/**
+ * struct err_values - structure containing error/reference values
+ * @refs: reference error values for -40C, 30C, 125C & 150C
+ * @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse
+ */
+struct err_values {
+	int refs[4];
+	int errs[4];
+};
+
+static void create_table_segments(struct err_values *err_vals, int seg,
+				  int *ref_table)
+{
+	int m = 0, c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2;
+
+	if (seg == 0)
+		idx1 = 0;
+	else
+		idx1 = err_vals->refs[seg];
+
+	idx2 = err_vals->refs[seg + 1];
+	err1 = err_vals->errs[seg];
+	err2 = err_vals->errs[seg + 1];
+	ref1 = err_vals->refs[seg];
+	ref2 = err_vals->refs[seg + 1];
+
+	/*
+	 * Calculate the slope with adc values read from the register
+	 * as the y-axis param and err in adc value as x-axis param
+	 */
+	num = ref2 - ref1;
+	den = err2 - err1;
+	if (den)
+		m = num / den;
+	c = ref2 - m * err2;
+
+	/*
+	 * Take care of divide by zero error if error values are same
+	 * Or when the slope is 0
+	 */
+	if (den != 0 && m != 0) {
+		for (i = idx1; i <= idx2; i++) {
+			err = (i - c) / m;
+			if (((i + err) < 0) || ((i + err) >= TABLE_SIZE))
+				continue;
+			derived_table[i] = ref_table[i + err];
+		}
+	} else { /* Constant error take care of divide by zero */
+		for (i = idx1; i <= idx2; i++) {
+			if (((i + err1) < 0) || ((i + err1) >= TABLE_SIZE))
+				continue;
+			derived_table[i] = ref_table[i + err1];
+		}
+	}
+}
+
+static int prep_lookup_table(struct err_values *err_vals, int *ref_table)
+{
+	int inc, i, seg;
+
+	/*
+	 * Fill up the lookup table under 3 segments
+	 * region -40C to +30C
+	 * region +30C to +125C
+	 * region +125C to +150C
+	 */
+	for (seg = 0; seg < 3; seg++)
+		create_table_segments(err_vals, seg, ref_table);
+
+	/* Get to the first valid temperature */
+	i = 0;
+	while (!derived_table[i])
+		i++;
+
+	/*
+	 * Get to the last zero index and back fill the temperature for
+	 * sake of continuity
+	 */
+	if (i) {
+		/* 300 milli celsius steps */
+		while (i--)
+			derived_table[i] = derived_table[i + 1] - 300;
+		/* case 0 */
+		derived_table[i] = derived_table[i + 1] - 300;
+	}
+
+	/*
+	 * Fill the last trailing 0s which are unfilled with increments of
+	 * 100 milli celsius till 1023 code
+	 */
+	i = TABLE_SIZE - 1;
+	while (!derived_table[i])
+		i--;
+
+	i++;
+	inc = 1;
+	while (i < TABLE_SIZE) {
+		derived_table[i] = derived_table[i - 1] + inc * 100;
+		i++;
+	}
+
+	return 0;
+}
+
+struct k3_thermal_data;
+
+struct k3_j72xx_bandgap {
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *cfg2_base;
+	void __iomem *fuse_base;
+	struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
+};
+
+/* common data structures */
+struct k3_thermal_data {
+	struct k3_j72xx_bandgap *bgp;
+	u32 ctrl_offset;
+	u32 stat_offset;
+};
+
+static int two_cmp(int tmp, int mask)
+{
+	tmp = ~(tmp);
+	tmp &= mask;
+	tmp += 1;
+
+	/* Return negative value */
+	return (0 - tmp);
+}
+
+static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
+				       unsigned int s2)
+{
+	int d01 = abs(s0 - s1);
+	int d02 = abs(s0 - s2);
+	int d12 = abs(s1 - s2);
+
+	if (d01 <= d02 && d01 <= d12)
+		return (s0 + s1) / 2;
+
+	if (d02 <= d01 && d02 <= d12)
+		return (s0 + s2) / 2;
+
+	return (s1 + s2) / 2;
+}
+
+static inline int k3_bgp_read_temp(struct k3_thermal_data *devdata,
+				   int *temp)
+{
+	struct k3_j72xx_bandgap *bgp;
+	unsigned int dtemp, s0, s1, s2;
+
+	bgp = devdata->bgp;
+	/*
+	 * Errata is applicable for am654 pg 1.0 silicon/J7ES. There
+	 * is a variation of the order for certain degree centigrade on AM654.
+	 * Work around that by getting the average of two closest
+	 * readings out of three readings everytime we want to
+	 * report temperatures.
+	 *
+	 * Errata workaround.
+	 */
+	s0 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s1 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s2 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	dtemp = vtm_get_best_value(s0, s1, s2);
+
+	if (dtemp < 0 || dtemp >= TABLE_SIZE)
+		return -EINVAL;
+
+	*temp = derived_table[dtemp];
+
+	return 0;
+}
+
+/* Get temperature callback function for thermal zone */
+static int k3_thermal_get_temp(void *devdata, int *temp)
+{
+	struct k3_thermal_data *data = devdata;
+	int ret = 0;
+
+	ret = k3_bgp_read_temp(data, temp);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
+	.get_temp = k3_thermal_get_temp,
+};
+
+static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
+{
+	int low = 0, high = TABLE_SIZE - 1, mid;
+
+	if (temp > 160000 || temp < -50000)
+		return -EINVAL;
+
+	/* Binary search to find the adc code */
+	while (low < (high - 1)) {
+		mid = (low + high) / 2;
+		if (temp <= derived_table[mid])
+			high = mid;
+		else
+			low = mid;
+	}
+
+	return mid;
+}
+
+static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
+			     struct k3_j72xx_bandgap *bgp)
+{
+	int i, tmp, pow;
+	int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
+		{ 0x0, 0x8, 0x4 },
+		{ 0x0, 0x8, 0x4 },
+		{ 0x0, -1,  0x4 },
+		{ 0x0, 0xC, -1 },
+		{ 0x0, 0xc, 0x8 }
+	};
+	int ct_bm[5][K3_VTM_CORRECTION_TEMP_CNT] = {
+		{ 0x3f, 0x1fe000, 0x1ff },
+		{ 0xfc0, 0x1fe000, 0x3fe00 },
+		{ 0x3f000, 0x7f800000, 0x7fc0000 },
+		{ 0xfc0000, 0x1fe0, 0x1f800000 },
+		{ 0x3f000000, 0x1fe000, 0x1ff0 }
+	};
+
+	for (i = 0; i < 3; i++) {
+		/* Extract the offset value using bit-mask */
+		if (ct_offsets[id][i] == -1 && i == 1) {
+			/* 25C offset Case of Sensor 2 split between 2 regs */
+			tmp = (readl(bgp->fuse_base + 0x8) & 0xE0000000) >> (29);
+			tmp |= ((readl(bgp->fuse_base + 0xC) & 0x1F) << 3);
+			pow = tmp & 0x80;
+		} else if (ct_offsets[id][i] == -1 && i == 2) {
+			/* 125C Case of Sensor 3 split between 2 regs */
+			tmp = (readl(bgp->fuse_base + 0x4) & 0xF8000000) >> (27);
+			tmp |= ((readl(bgp->fuse_base + 0x8) & 0xF) << 5);
+			pow = tmp & 0x100;
+		} else {
+			tmp = readl(bgp->fuse_base + ct_offsets[id][i]);
+			tmp &= ct_bm[id][i];
+			tmp = tmp >> __ffs(ct_bm[id][i]);
+
+			/* Obtain the sign bit pow*/
+			pow = ct_bm[id][i] >> __ffs(ct_bm[id][i]);
+			pow += 1;
+			pow /= 2;
+		}
+
+		/* Check for negative value */
+		if (tmp & pow) {
+			/* 2's complement value */
+			tmp = two_cmp(tmp, ct_bm[id][i] >> __ffs(ct_bm[id][i]));
+		}
+		err[i] = tmp;
+	}
+
+	/* Err value for 150C is set to 0 */
+	err[i] = 0;
+}
+
+static void print_look_up_table(struct device *dev, int *ref_table)
+{
+	int i;
+
+	dev_dbg(dev, "The contents of derived array\n");
+	dev_dbg(dev, "Code   Temperature\n");
+	for (i = 0; i < TABLE_SIZE; i++)
+		dev_dbg(dev, "%d       %d %d\n", i, derived_table[i], ref_table[i]);
+}
+
+struct k3_j72xx_bandgap_data {
+	unsigned int has_errata_i2128;
+};
+
+static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
+{
+	int ret = 0, cnt, val, id;
+	int high_max, low_temp;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct k3_j72xx_bandgap *bgp;
+	struct k3_thermal_data *data;
+	int workaround_needed = 0;
+	const struct k3_j72xx_bandgap_data *driver_data;
+	struct thermal_zone_device *ti_thermal;
+	int *ref_table;
+	struct err_values err_vals;
+
+	const s64 golden_factors[] = {
+		-490019999999999936,
+		3251200000000000,
+		-1705800000000,
+		603730000,
+		-92627,
+	};
+
+	const s64 pvt_wa_factors[] = {
+		-415230000000000000,
+		3126600000000000,
+		-1157800000000,
+	};
+
+	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
+	if (!bgp)
+		return -ENOMEM;
+
+	bgp->dev = dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bgp->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->base))
+		return PTR_ERR(bgp->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	bgp->cfg2_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->cfg2_base))
+		return PTR_ERR(bgp->cfg2_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	bgp->fuse_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->fuse_base))
+		return PTR_ERR(bgp->fuse_base);
+
+	driver_data = of_device_get_match_data(dev);
+	if (driver_data)
+		workaround_needed = driver_data->has_errata_i2128;
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
+	/* Get the sensor count in the VTM */
+	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
+	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
+	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
+
+	data = devm_kcalloc(bgp->dev, cnt, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	ref_table = kzalloc(sizeof(*ref_table) * TABLE_SIZE, GFP_KERNEL);
+	if (!ref_table) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * TABLE_SIZE,
+				     GFP_KERNEL);
+	if (!derived_table) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	/* Workaround not needed if bit30/bit31 is set even for J721e */
+	if (workaround_needed && (readl(bgp->fuse_base + 0x0) & 0xc0000000) == 0xc0000000)
+		workaround_needed = false;
+
+	dev_dbg(bgp->dev, "Work around %sneeded\n",
+		workaround_needed ? "not " : "");
+
+	if (!workaround_needed)
+		init_table(5, ref_table, golden_factors);
+	else
+		init_table(3, ref_table, pvt_wa_factors);
+
+	/* Register the thermal sensors */
+	for (id = 0; id < cnt; id++) {
+		data[id].bgp = bgp;
+		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
+		data[id].stat_offset = data[id].ctrl_offset +
+					K3_VTM_TMPSENS_STAT_OFFSET;
+
+		if (workaround_needed) {
+			/* ref adc values for -40C, 30C & 125C respectively */
+			err_vals.refs[0] = MINUS40CREF;
+			err_vals.refs[1] = PLUS30CREF;
+			err_vals.refs[2] = PLUS125CREF;
+			err_vals.refs[3] = PLUS150CREF;
+			get_efuse_values(id, &data[id], err_vals.errs, bgp);
+		}
+
+		if (id == 0 && workaround_needed)
+			prep_lookup_table(&err_vals, ref_table);
+		else if (id == 0 && !workaround_needed)
+			memcpy(derived_table, ref_table, TABLE_SIZE * 4);
+
+		val = readl(data[id].bgp->cfg2_base + data[id].ctrl_offset);
+		val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN |
+			K3_VTM_TMPSENS_CTRL_SOC |
+			K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4));
+		writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
+
+		bgp->ts_data[id] = &data[id];
+		ti_thermal =
+		devm_thermal_zone_of_sensor_register(bgp->dev, id,
+						     &data[id],
+						     &k3_of_thermal_ops);
+		if (IS_ERR(ti_thermal)) {
+			dev_err(bgp->dev, "thermal zone device is NULL\n");
+			ret = PTR_ERR(ti_thermal);
+			goto err_alloc;
+		}
+	}
+
+	/*
+	 * Program TSHUT thresholds
+	 * Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2
+	 * Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN  bit
+	 *         This is already taken care as per of init
+	 * Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN  bit
+	 */
+	high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP);
+	low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP);
+
+	writel((low_temp << 16) | high_max, data[0].bgp->cfg2_base +
+	       K3_VTM_MISC_CTRL2_OFFSET);
+	mdelay(100);
+	writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base +
+	       K3_VTM_MISC_CTRL_OFFSET);
+
+	platform_set_drvdata(pdev, bgp);
+
+	print_look_up_table(dev, ref_table);
+	/*
+	 * Now that the derived_table has the appropriate look up values
+	 * Free up the ref_table
+	 */
+	kfree(ref_table);
+
+	return 0;
+
+err_alloc:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int k3_j72xx_bandgap_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
+	.has_errata_i2128 = 1,
+};
+
+const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
+	.has_errata_i2128 = 0,
+};
+
+static const struct of_device_id of_k3_j72xx_bandgap_match[] = {
+	{
+		.compatible = "ti,j721e-vtm",
+		.data = &k3_j72xx_bandgap_j721e_data,
+	},
+	{
+		.compatible = "ti,j7200-vtm",
+		.data = &k3_j72xx_bandgap_j7200_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_k3_j72xx_bandgap_match);
+
+static struct platform_driver k3_j72xx_bandgap_sensor_driver = {
+	.probe = k3_j72xx_bandgap_probe,
+	.remove = k3_j72xx_bandgap_remove,
+	.driver = {
+		.name = "k3-j72xx-soc-thermal",
+		.of_match_table	= of_k3_j72xx_bandgap_match,
+	},
+};
+
+module_platform_driver(k3_j72xx_bandgap_sensor_driver);
+
+MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@ -220,6 +220,7 @@ static int lmh_probe(struct platform_device *pdev)
 }

 static const struct of_device_id lmh_table[] = {
+	{ .compatible = "qcom,sc8180x-lmh", },
 	{ .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS},
 	{ .compatible = "qcom,sm8150-lmh", },
 	{}
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@ -4,7 +4,10 @@
 *
 * Based on original driver:
 * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
 */
+
 #include <linux/bitfield.h>
 #include <linux/iio/adc/qcom-vadc-common.h>
 #include <linux/iio/consumer.h>
@ -15,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/thermal.h>
+#include <asm-generic/unaligned.h>

 /*
 * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each
@ -71,6 +75,60 @@
 #define ADC_TM5_M_HIGH_THR_INT_EN			BIT(1)
 #define ADC_TM5_M_LOW_THR_INT_EN			BIT(0)

+#define ADC_TM_GEN2_STATUS1			0x08
+#define ADC_TM_GEN2_STATUS_LOW_SET		0x09
+#define ADC_TM_GEN2_STATUS_LOW_CLR		0x0a
+#define ADC_TM_GEN2_STATUS_HIGH_SET		0x0b
+#define ADC_TM_GEN2_STATUS_HIGH_CLR		0x0c
+
+#define ADC_TM_GEN2_CFG_HS_SET			0x0d
+#define ADC_TM_GEN2_CFG_HS_FLAG			BIT(0)
+#define ADC_TM_GEN2_CFG_HS_CLR			0x0e
+
+#define ADC_TM_GEN2_SID				0x40
+
+#define ADC_TM_GEN2_CH_CTL			0x41
+#define ADC_TM_GEN2_TM_CH_SEL			GENMASK(7, 5)
+#define ADC_TM_GEN2_MEAS_INT_SEL		GENMASK(3, 2)
+
+#define ADC_TM_GEN2_ADC_DIG_PARAM		0x42
+#define ADC_TM_GEN2_CTL_CAL_SEL			GENMASK(5, 4)
+#define ADC_TM_GEN2_CTL_DEC_RATIO_MASK		GENMASK(3, 2)
+
+#define ADC_TM_GEN2_FAST_AVG_CTL		0x43
+#define ADC_TM_GEN2_FAST_AVG_EN			BIT(7)
+
+#define ADC_TM_GEN2_ADC_CH_SEL_CTL		0x44
+
+#define ADC_TM_GEN2_DELAY_CTL			0x45
+#define ADC_TM_GEN2_HW_SETTLE_DELAY		GENMASK(3, 0)
+
+#define ADC_TM_GEN2_EN_CTL1			0x46
+#define ADC_TM_GEN2_EN				BIT(7)
+
+#define ADC_TM_GEN2_CONV_REQ			0x47
+#define ADC_TM_GEN2_CONV_REQ_EN			BIT(7)
+
+#define ADC_TM_GEN2_LOW_THR0			0x49
+#define ADC_TM_GEN2_LOW_THR1			0x4a
+#define ADC_TM_GEN2_HIGH_THR0			0x4b
+#define ADC_TM_GEN2_HIGH_THR1			0x4c
+#define ADC_TM_GEN2_LOWER_MASK(n)		((n) & GENMASK(7, 0))
+#define ADC_TM_GEN2_UPPER_MASK(n)		(((n) & GENMASK(15, 8)) >> 8)
+
+#define ADC_TM_GEN2_MEAS_IRQ_EN			0x4d
+#define ADC_TM_GEN2_MEAS_EN			BIT(7)
+#define ADC_TM5_GEN2_HIGH_THR_INT_EN		BIT(1)
+#define ADC_TM5_GEN2_LOW_THR_INT_EN		BIT(0)
+
+#define ADC_TM_GEN2_MEAS_INT_LSB		0x50
+#define ADC_TM_GEN2_MEAS_INT_MSB		0x51
+#define ADC_TM_GEN2_MEAS_INT_MODE		0x52
+
+#define ADC_TM_GEN2_Mn_DATA0(n)			((n * 2) + 0xa0)
+#define ADC_TM_GEN2_Mn_DATA1(n)			((n * 2) + 0xa1)
+#define ADC_TM_GEN2_DATA_SHIFT			8
+
 enum adc5_timer_select {
 	ADC5_TIMER_SEL_1 = 0,
 	ADC5_TIMER_SEL_2,
@ -78,11 +136,11 @@ enum adc5_timer_select {
 	ADC5_TIMER_SEL_NONE,
 };

-struct adc_tm5_data {
-	const u32	full_scale_code_volt;
-	unsigned int	*decimation;
-	unsigned int	*hw_settle;
-	bool		is_hc;
+enum adc5_gen {
+	ADC_TM5,
+	ADC_TM_HC,
+	ADC_TM5_GEN2,
+	ADC_TM5_MAX
 };

 enum adc_tm5_cal_method {
@ -91,7 +149,28 @@ enum adc_tm5_cal_method {
 	ADC_TM5_ABSOLUTE_CAL
 };

+enum adc_tm_gen2_time_select {
+	MEAS_INT_50MS = 0,
+	MEAS_INT_100MS,
+	MEAS_INT_1S,
+	MEAS_INT_SET,
+	MEAS_INT_NONE,
+};
+
 struct adc_tm5_chip;
+struct adc_tm5_channel;
+
+struct adc_tm5_data {
+	const u32 full_scale_code_volt;
+	unsigned int *decimation;
+	unsigned int *hw_settle;
+	int (*disable_channel)(struct adc_tm5_channel *channel);
+	int (*configure)(struct adc_tm5_channel *channel, int low, int high);
+	irqreturn_t (*isr)(int irq, void *data);
+	int (*init)(struct adc_tm5_chip *chip);
+	char *irq_name;
+	int gen;
+};

 /**
 * struct adc_tm5_channel - ADC Thermal Monitoring channel data.
@ -101,6 +180,12 @@ struct adc_tm5_chip;
 * @prescale: channel scaling performed on the input signal.
 * @hw_settle_time: the time between AMUX being configured and the
 *	start of conversion.
+ * @decimation: sampling rate supported for the channel.
+ * @avg_samples: ability to provide single result from the ADC
+ *	that is an average of multiple measurements.
+ * @high_thr_en: channel upper voltage threshold enable state.
+ * @low_thr_en: channel lower voltage threshold enable state.
+ * @meas_en: recurring measurement enable state
 * @iio: IIO channel instance used by this channel.
 * @chip: ADC TM chip instance.
 * @tzd: thermal zone device used by this channel.
@ -111,6 +196,11 @@ struct adc_tm5_channel {
 	enum adc_tm5_cal_method	cal_method;
 	unsigned int		prescale;
 	unsigned int		hw_settle_time;
+	unsigned int		decimation;	/* For Gen2 ADC_TM */
+	unsigned int		avg_samples;	/* For Gen2 ADC_TM */
+	bool			high_thr_en;	/* For Gen2 ADC_TM */
+	bool			low_thr_en;	/* For Gen2 ADC_TM */
+	bool			meas_en;	/* For Gen2 ADC_TM */
 	struct iio_channel	*iio;
 	struct adc_tm5_chip	*chip;
 	struct thermal_zone_device *tzd;
@ -124,9 +214,15 @@ struct adc_tm5_channel {
 * @channels: array of ADC TM channel data.
 * @nchannels: amount of channels defined/allocated
 * @decimation: sampling rate supported for the channel.
+ *      Applies to all channels, used only on Gen1 ADC_TM.
 * @avg_samples: ability to provide single result from the ADC
- *	that is an average of multiple measurements.
+ *      that is an average of multiple measurements. Applies to all
+ *      channels, used only on Gen1 ADC_TM.
 * @base: base address of TM registers.
+ * @adc_mutex_lock: ADC_TM mutex lock, used only on Gen2 ADC_TM.
+ *      It is used to ensure only one ADC channel configuration
+ *      is done at a time using the shared set of configuration
+ *      registers.
 */
 struct adc_tm5_chip {
 	struct regmap		*regmap;
@ -137,22 +233,7 @@ struct adc_tm5_chip {
 	unsigned int		decimation;
 	unsigned int		avg_samples;
 	u16			base;
-};
-
-static const struct adc_tm5_data adc_tm5_data_pmic = {
-	.full_scale_code_volt = 0x70e4,
-	.decimation = (unsigned int []) { 250, 420, 840 },
-	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
-					 1000, 2000, 4000, 8000, 16000, 32000,
-					 64000, 128000 },
-};
-
-static const struct adc_tm5_data adc_tm_hc_data_pmic = {
-	.full_scale_code_volt = 0x70e4,
-	.decimation = (unsigned int []) { 256, 512, 1024 },
-	.hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700,
-					 1000, 2000, 4000, 6000, 8000, 10000 },
-	.is_hc = true,
+	struct mutex		adc_mutex_lock;
 };

 static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
@ -219,6 +300,61 @@ static irqreturn_t adc_tm5_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }

+static irqreturn_t adc_tm5_gen2_isr(int irq, void *data)
+{
+	struct adc_tm5_chip *chip = data;
+	u8 status_low, status_high;
+	int ret, i;
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low));
+	if (ret) {
+		dev_err(chip->dev, "read status_low failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high));
+	if (ret) {
+		dev_err(chip->dev, "read status_high failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low));
+	if (ret < 0) {
+		dev_err(chip->dev, "clear status low failed with %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high));
+	if (ret < 0) {
+		dev_err(chip->dev, "clear status high failed with %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	for (i = 0; i < chip->nchannels; i++) {
+		bool upper_set = false, lower_set = false;
+		unsigned int ch = chip->channels[i].channel;
+
+		/* No TZD, we warned at the boot time */
+		if (!chip->channels[i].tzd)
+			continue;
+
+		if (!chip->channels[i].meas_en)
+			continue;
+
+		lower_set = (status_low & BIT(ch)) &&
+			(chip->channels[i].low_thr_en);
+
+		upper_set = (status_high & BIT(ch)) &&
+			(chip->channels[i].high_thr_en);
+
+		if (upper_set || lower_set)
+			thermal_zone_device_update(chip->channels[i].tzd,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int adc_tm5_get_temp(void *data, int *temp)
 {
 	struct adc_tm5_channel *channel = data;
@ -249,6 +385,104 @@ static int adc_tm5_disable_channel(struct adc_tm5_channel *channel)
 				  0);
 }

+#define ADC_TM_GEN2_POLL_DELAY_MIN_US		100
+#define ADC_TM_GEN2_POLL_DELAY_MAX_US		110
+#define ADC_TM_GEN2_POLL_RETRY_COUNT		3
+
+static int32_t adc_tm5_gen2_conv_req(struct adc_tm5_chip *chip)
+{
+	int ret;
+	u8 data;
+	unsigned int count;
+
+	data = ADC_TM_GEN2_EN;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_EN_CTL1, &data, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm enable failed with %d\n", ret);
+		return ret;
+	}
+
+	data = ADC_TM_GEN2_CFG_HS_FLAG;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_CFG_HS_SET, &data, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm handshake failed with %d\n", ret);
+		return ret;
+	}
+
+	data = ADC_TM_GEN2_CONV_REQ_EN;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_CONV_REQ, &data, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm request conversion failed with %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * SW sets a handshake bit and waits for PBS to clear it
+	 * before the next conversion request can be queued.
+	 */
+
+	for (count = 0; count < ADC_TM_GEN2_POLL_RETRY_COUNT; count++) {
+		ret = adc_tm5_read(chip, ADC_TM_GEN2_CFG_HS_SET, &data, sizeof(data));
+		if (ret < 0) {
+			dev_err(chip->dev, "adc-tm read failed with %d\n", ret);
+			return ret;
+		}
+
+		if (!(data & ADC_TM_GEN2_CFG_HS_FLAG))
+			return ret;
+		usleep_range(ADC_TM_GEN2_POLL_DELAY_MIN_US,
+			ADC_TM_GEN2_POLL_DELAY_MAX_US);
+	}
+
+	dev_err(chip->dev, "adc-tm conversion request handshake timed out\n");
+
+	return -ETIMEDOUT;
+}
+
+static int adc_tm5_gen2_disable_channel(struct adc_tm5_channel *channel)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	int ret;
+	u8 val;
+
+	mutex_lock(&chip->adc_mutex_lock);
+
+	channel->meas_en = false;
+	channel->high_thr_en = false;
+	channel->low_thr_en = false;
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_CH_CTL, &val, sizeof(val));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm block read failed with %d\n", ret);
+		goto disable_fail;
+	}
+
+	val &= ~ADC_TM_GEN2_TM_CH_SEL;
+	val |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel);
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_CH_CTL, &val, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm channel disable failed with %d\n", ret);
+		goto disable_fail;
+	}
+
+	val = 0;
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_MEAS_IRQ_EN, &val, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm interrupt disable failed with %d\n", ret);
+		goto disable_fail;
+	}
+
+
+	ret = adc_tm5_gen2_conv_req(channel->chip);
+	if (ret < 0)
+		dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret);
+
+disable_fail:
+	mutex_unlock(&chip->adc_mutex_lock);
+	return ret;
+}
+
 static int adc_tm5_enable(struct adc_tm5_chip *chip)
 {
 	int ret;
@ -291,8 +525,7 @@ static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
 		u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
 				chip->data->full_scale_code_volt, high);

-		buf[1] = adc_code & 0xff;
-		buf[2] = adc_code >> 8;
+		put_unaligned_le16(adc_code, &buf[1]);
 		buf[7] |= ADC_TM5_M_LOW_THR_INT_EN;
 	} else {
 		buf[7] &= ~ADC_TM5_M_LOW_THR_INT_EN;
@ -303,8 +536,7 @@ static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
 		u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
 				chip->data->full_scale_code_volt, low);

-		buf[3] = adc_code & 0xff;
-		buf[4] = adc_code >> 8;
+		put_unaligned_le16(adc_code, &buf[3]);
 		buf[7] |= ADC_TM5_M_HIGH_THR_INT_EN;
 	} else {
 		buf[7] &= ~ADC_TM5_M_HIGH_THR_INT_EN;
@ -329,6 +561,82 @@ static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
 	return adc_tm5_enable(chip);
 }

+static int adc_tm5_gen2_configure(struct adc_tm5_channel *channel, int low, int high)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	int ret;
+	u8 buf[14];
+	u16 adc_code;
+
+	mutex_lock(&chip->adc_mutex_lock);
+
+	channel->meas_en = true;
+
+	ret = adc_tm5_read(chip, ADC_TM_GEN2_SID, buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm block read failed with %d\n", ret);
+		goto config_fail;
+	}
+
+	/* Set SID from virtual channel number */
+	buf[0] = channel->adc_channel >> 8;
+
+	/* Set TM channel number used and measurement interval */
+	buf[1] &= ~ADC_TM_GEN2_TM_CH_SEL;
+	buf[1] |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel);
+	buf[1] &= ~ADC_TM_GEN2_MEAS_INT_SEL;
+	buf[1] |= FIELD_PREP(ADC_TM_GEN2_MEAS_INT_SEL, MEAS_INT_1S);
+
+	buf[2] &= ~ADC_TM_GEN2_CTL_DEC_RATIO_MASK;
+	buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_DEC_RATIO_MASK, channel->decimation);
+	buf[2] &= ~ADC_TM_GEN2_CTL_CAL_SEL;
+	buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_CAL_SEL, channel->cal_method);
+
+	buf[3] = channel->avg_samples | ADC_TM_GEN2_FAST_AVG_EN;
+
+	buf[4] = channel->adc_channel & 0xff;
+
+	buf[5] = channel->hw_settle_time & ADC_TM_GEN2_HW_SETTLE_DELAY;
+
+	/* High temperature corresponds to low voltage threshold */
+	if (high != INT_MAX) {
+		channel->low_thr_en = true;
+		adc_code = qcom_adc_tm5_gen2_temp_res_scale(high);
+		put_unaligned_le16(adc_code, &buf[9]);
+	} else {
+		channel->low_thr_en = false;
+	}
+
+	/* Low temperature corresponds to high voltage threshold */
+	if (low != -INT_MAX) {
+		channel->high_thr_en = true;
+		adc_code = qcom_adc_tm5_gen2_temp_res_scale(low);
+		put_unaligned_le16(adc_code, &buf[11]);
+	} else {
+		channel->high_thr_en = false;
+	}
+
+	buf[13] = ADC_TM_GEN2_MEAS_EN;
+	if (channel->high_thr_en)
+		buf[13] |= ADC_TM5_GEN2_HIGH_THR_INT_EN;
+	if (channel->low_thr_en)
+		buf[13] |= ADC_TM5_GEN2_LOW_THR_INT_EN;
+
+	ret = adc_tm5_write(chip, ADC_TM_GEN2_SID, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret);
+		goto config_fail;
+	}
+
+	ret = adc_tm5_gen2_conv_req(channel->chip);
+	if (ret < 0)
+		dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret);
+
+config_fail:
+	mutex_unlock(&chip->adc_mutex_lock);
+	return ret;
+}
+
 static int adc_tm5_set_trips(void *data, int low, int high)
 {
 	struct adc_tm5_channel *channel = data;
@ -343,14 +651,14 @@ static int adc_tm5_set_trips(void *data, int low, int high)
 		channel->channel, low, high);

 	if (high == INT_MAX && low <= -INT_MAX)
-		ret = adc_tm5_disable_channel(channel);
+		ret = chip->data->disable_channel(channel);
 	else
-		ret = adc_tm5_configure(channel, low, high);
+		ret = chip->data->configure(channel, low, high);

 	return ret;
 }

-static struct thermal_zone_of_device_ops adc_tm5_ops = {
+static struct thermal_zone_of_device_ops adc_tm5_thermal_ops = {
 	.get_temp = adc_tm5_get_temp,
 	.set_trips = adc_tm5_set_trips,
 };
@ -366,7 +674,7 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 		tzd = devm_thermal_zone_of_sensor_register(adc_tm->dev,
 							   adc_tm->channels[i].channel,
 							   &adc_tm->channels[i],
-							   &adc_tm5_ops);
+							   &adc_tm5_thermal_ops);
 		if (IS_ERR(tzd)) {
 			if (PTR_ERR(tzd) == -ENODEV) {
 				dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n",
@ -442,12 +750,37 @@ static int adc_tm5_init(struct adc_tm5_chip *chip)
 	return ret;
 }

+static int adc_tm5_gen2_init(struct adc_tm5_chip *chip)
+{
+	u8 channels_available;
+	int ret;
+	unsigned int i;
+
+	ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM,
+			   &channels_available, sizeof(channels_available));
+	if (ret) {
+		dev_err(chip->dev, "read failed for BTM channels\n");
+		return ret;
+	}
+
+	for (i = 0; i < chip->nchannels; i++) {
+		if (chip->channels[i].channel >= channels_available) {
+			dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
+			return -EINVAL;
+		}
+	}
+
+	mutex_init(&chip->adc_mutex_lock);
+
+	return ret;
+}
+
 static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
 				       struct adc_tm5_channel *channel,
 				       struct device_node *node)
 {
 	const char *name = node->name;
-	u32 chan, value, varr[2];
+	u32 chan, value, adc_channel, varr[2];
 	int ret;
 	struct device *dev = adc_tm->dev;
 	struct of_phandle_args args;
@ -477,7 +810,16 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
 	}
 	of_node_put(args.np);

-	if (args.args_count != 1 || args.args[0] >= ADC5_MAX_CHANNEL) {
+	if (args.args_count != 1) {
+		dev_err(dev, "%s: invalid args count for ADC channel %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	adc_channel = args.args[0];
+	if (adc_tm->data->gen == ADC_TM5_GEN2)
+		adc_channel &= 0xff;
+
+	if (adc_channel >= ADC5_MAX_CHANNEL) {
 		dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan);
 		return -EINVAL;
 	}
@ -523,9 +865,76 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
 	else
 		channel->cal_method = ADC_TM5_ABSOLUTE_CAL;

+	if (adc_tm->data->gen == ADC_TM5_GEN2) {
+		ret = of_property_read_u32(node, "qcom,decimation", &value);
+		if (!ret) {
+			ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation);
+			if (ret < 0) {
+				dev_err(dev, "invalid decimation %d\n", value);
+				return ret;
+			}
+			channel->decimation = ret;
+		} else {
+			channel->decimation = ADC5_DECIMATION_DEFAULT;
+		}
+
+		ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+		if (!ret) {
+			ret = qcom_adc5_avg_samples_from_dt(value);
+			if (ret < 0) {
+				dev_err(dev, "invalid avg-samples %d\n", value);
+				return ret;
+			}
+			channel->avg_samples = ret;
+		} else {
+			channel->avg_samples = VADC_DEF_AVG_SAMPLES;
+		}
+	}
+
 	return 0;
 }

+static const struct adc_tm5_data adc_tm5_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 250, 420, 840 },
+	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 8000, 16000, 32000,
+					 64000, 128000 },
+	.disable_channel = adc_tm5_disable_channel,
+	.configure = adc_tm5_configure,
+	.isr = adc_tm5_isr,
+	.init = adc_tm5_init,
+	.irq_name = "pm-adc-tm5",
+	.gen = ADC_TM5,
+};
+
+static const struct adc_tm5_data adc_tm_hc_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 256, 512, 1024 },
+	.hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 6000, 8000, 10000 },
+	.disable_channel = adc_tm5_disable_channel,
+	.configure = adc_tm5_configure,
+	.isr = adc_tm5_isr,
+	.init = adc_tm_hc_init,
+	.irq_name = "pm-adc-tm5",
+	.gen = ADC_TM_HC,
+};
+
+static const struct adc_tm5_data adc_tm5_gen2_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 85, 340, 1360 },
+	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 8000, 16000, 32000,
+					 64000, 128000 },
+	.disable_channel = adc_tm5_gen2_disable_channel,
+	.configure = adc_tm5_gen2_configure,
+	.isr = adc_tm5_gen2_isr,
+	.init = adc_tm5_gen2_init,
+	.irq_name = "pm-adc-tm5-gen2",
+	.gen = ADC_TM5_GEN2,
+};
+
 static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node)
 {
 	struct adc_tm5_channel *channels;
@ -623,10 +1032,7 @@ static int adc_tm5_probe(struct platform_device *pdev)
 		return ret;
 	}

-	if (adc_tm->data->is_hc)
-		ret = adc_tm_hc_init(adc_tm);
-	else
-		ret = adc_tm5_init(adc_tm);
+	ret = adc_tm->data->init(adc_tm);
 	if (ret) {
 		dev_err(dev, "adc-tm init failed\n");
 		return ret;
@ -638,8 +1044,8 @@ static int adc_tm5_probe(struct platform_device *pdev)
 		return ret;
 	}

-	return devm_request_threaded_irq(dev, irq, NULL, adc_tm5_isr,
-					 IRQF_ONESHOT, "pm-adc-tm5", adc_tm);
+	return devm_request_threaded_irq(dev, irq, NULL, adc_tm->data->isr,
+			IRQF_ONESHOT, adc_tm->data->irq_name, adc_tm);
 }

 static const struct of_device_id adc_tm5_match_table[] = {
@ -651,6 +1057,10 @@ static const struct of_device_id adc_tm5_match_table[] = {
 		.compatible = "qcom,spmi-adc-tm-hc",
 		.data = &adc_tm_hc_data_pmic,
 	},
+	{
+		.compatible = "qcom,spmi-adc-tm5-gen2",
+		.data = &adc_tm5_gen2_data_pmic,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@ -979,6 +979,9 @@ static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8939-tsens",
 		.data = &data_8939,
+	}, {
+		.compatible = "qcom,msm8960-tsens",
+		.data = &data_8960,
 	}, {
 		.compatible = "qcom,msm8974-tsens",
 		.data = &data_8974,
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@ -445,7 +445,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_common *common;
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
-	struct resource *res, *irq;
+	struct resource *res;
 	const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
 	int mres = 0;
 	int i;
@ -467,9 +467,16 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(dev);

 	for (i = 0; i < chip->nirqs; i++) {
-		irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-		if (!irq)
-			continue;
+		int irq;
+
+		ret = platform_get_irq_optional(pdev, i);
+		if (ret < 0 && ret != -ENXIO)
+			goto error_unregister;
+		if (ret > 0)
+			irq = ret;
+		else
+			break;
+
 		if (!common->base) {
 			/*
 			 * platform has IRQ support.
@ -487,7 +494,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			idle = 0; /* polling delay is not needed */
 		}

-		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+		ret = devm_request_irq(dev, irq, rcar_thermal_irq,
 				       IRQF_SHARED, dev_name(dev), common);
 		if (ret) {
 			dev_err(dev, "irq request failed\n ");
--- a/drivers/thermal/rzg2l_thermal.c
+++ b/drivers/thermal/rzg2l_thermal.c
@ -32,6 +32,8 @@
 #define TSU_SS		0x10

 #define OTPTSUTRIM_REG(n)	(0x18 + ((n) * 0x4))
+#define OTPTSUTRIM_EN_MASK	BIT(31)
+#define OTPTSUTRIM_MASK		GENMASK(11, 0)

 /* Sensor Mode Register(TSU_SM) */
 #define TSU_SM_EN_TS		BIT(0)
@ -183,11 +185,15 @@ static int rzg2l_thermal_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(dev);

 	priv->calib0 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0));
-	if (!priv->calib0)
+	if (priv->calib0 & OTPTSUTRIM_EN_MASK)
+		priv->calib0 &= OTPTSUTRIM_MASK;
+	else
 		priv->calib0 = SW_CALIB0_VAL;

 	priv->calib1 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(1));
-	if (!priv->calib1)
+	if (priv->calib1 & OTPTSUTRIM_EN_MASK)
+		priv->calib1 &= OTPTSUTRIM_MASK;
+	else
 		priv->calib1 = SW_CALIB1_VAL;

 	platform_set_drvdata(pdev, priv);
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@ -947,6 +947,7 @@ __thermal_cooling_device_register(struct device_node *np,
 	return cdev;

 out_kfree_type:
+	thermal_cooling_device_destroy_sysfs(cdev);
 	kfree(cdev->type);
 	put_device(&cdev->device);
 	cdev = NULL;
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@ -35,7 +35,7 @@ struct __thermal_cooling_bind_param {
 };

 /**
- * struct __thermal_bind_param - a match between trip and cooling device
+ * struct __thermal_bind_params - a match between trip and cooling device
 * @tcbp: a pointer to an array of cooling devices
 * @count: number of elements in array
 * @trip_id: the trip point index
@ -203,6 +203,14 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
 	return data->ops->get_trend(data->sensor_data, trip, trend);
 }

+static int of_thermal_change_mode(struct thermal_zone_device *tz,
+				enum thermal_device_mode mode)
+{
+	struct __thermal_zone *data = tz->devdata;
+
+	return data->ops->change_mode(data->sensor_data, mode);
+}
+
 static int of_thermal_bind(struct thermal_zone_device *thermal,
 			   struct thermal_cooling_device *cdev)
 {
@ -408,6 +416,9 @@ thermal_zone_of_add_sensor(struct device_node *zone,
 	if (ops->set_emul_temp)
 		tzd->ops->set_emul_temp = of_thermal_set_emul_temp;

+	if (ops->change_mode)
+		tzd->ops->change_mode = of_thermal_change_mode;
+
 	mutex_unlock(&tzd->lock);

 	return tzd;
@ -569,6 +580,7 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
 	tzd->ops->get_temp = NULL;
 	tzd->ops->get_trend = NULL;
 	tzd->ops->set_emul_temp = NULL;
+	tzd->ops->change_mode = NULL;

 	tz->ops = NULL;
 	tz->sensor_data = NULL;
--- a/include/linux/iio/adc/qcom-vadc-common.h
+++ b/include/linux/iio/adc/qcom-vadc-common.h
@ -152,6 +152,8 @@ int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
 u16 qcom_adc_tm5_temp_volt_scale(unsigned int prescale_ratio,
 				 u32 full_scale_code_volt, int temp);

+u16 qcom_adc_tm5_gen2_temp_res_scale(int temp);
+
 int qcom_adc5_prescaling_from_dt(u32 num, u32 den);

 int qcom_adc5_hw_settle_time_from_dt(u32 value, const unsigned int *hw_settle);
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@ -299,6 +299,8 @@ struct thermal_zone_params {
 *		   temperature.
 * @set_trip_temp: a pointer to a function that sets the trip temperature on
 *		   hardware.
+ * @change_mode: a pointer to a function that notifies the thermal zone
+ *		   mode change.
 */
 struct thermal_zone_of_device_ops {
 	int (*get_temp)(void *, int *);
@ -306,6 +308,7 @@ struct thermal_zone_of_device_ops {
 	int (*set_trips)(void *, int, int);
 	int (*set_emul_temp)(void *, int);
 	int (*set_trip_temp)(void *, int, int);
+	int (*change_mode) (void *, enum thermal_device_mode);
 };

 /* Function declarations */
--- a/tools/Makefile
+++ b/tools/Makefile
@ -32,6 +32,9 @@ help:
 	@echo '  bootconfig             - boot config tool'
 	@echo '  spi                    - spi tools'
 	@echo '  tmon                   - thermal monitoring and tuning tool'
+	@echo '  thermometer            - temperature capture tool'
+	@echo '  thermal-engine         - thermal monitoring tool'
+	@echo '  thermal                - thermal library'
 	@echo '  tracing                - misc tracing tools'
 	@echo '  turbostat              - Intel CPU idle stats and freq reporting tool'
 	@echo '  usb                    - USB testing tools'
@ -89,12 +92,21 @@ perf: FORCE
 selftests: FORCE
 	$(call descend,testing/$@)

+thermal: FORCE
+	$(call descend,lib/$@)
+
 turbostat x86_energy_perf_policy intel-speed-select: FORCE
 	$(call descend,power/x86/$@)

 tmon: FORCE
 	$(call descend,thermal/$@)

+thermometer: FORCE
+	$(call descend,thermal/$@)
+
+thermal-engine: FORCE thermal
+	$(call descend,thermal/$@)
+
 freefall: FORCE
 	$(call descend,laptop/$@)

@ -105,7 +117,7 @@ all: acpi cgroup counter cpupower gpio hv firewire \
 		perf selftests bootconfig spi turbostat usb \
 		virtio vm bpf x86_energy_perf_policy \
 		tmon freefall iio objtool kvm_stat wmi \
-		pci debugging tracing
+		pci debugging tracing thermal thermometer thermal-engine

 acpi_install:
 	$(call descend,power/$(@:_install=),install)
@ -119,12 +131,21 @@ cgroup_install counter_install firewire_install gpio_install hv_install iio_inst
 selftests_install:
 	$(call descend,testing/$(@:_install=),install)

+thermal_install:
+	$(call descend,lib/$(@:_install=),install)
+
 turbostat_install x86_energy_perf_policy_install intel-speed-select_install:
 	$(call descend,power/x86/$(@:_install=),install)

 tmon_install:
 	$(call descend,thermal/$(@:_install=),install)

+thermometer_install:
+	$(call descend,thermal/$(@:_install=),install)
+
+thermal-engine_install:
+	$(call descend,thermal/$(@:_install=),install)
+
 freefall_install:
 	$(call descend,laptop/$(@:_install=),install)

@ -137,7 +158,7 @@ install: acpi_install cgroup_install counter_install cpupower_install gpio_insta
 		virtio_install vm_install bpf_install x86_energy_perf_policy_install \
 		tmon_install freefall_install objtool_install kvm_stat_install \
 		wmi_install pci_install debugging_install intel-speed-select_install \
-		tracing_install
+		tracing_install thermometer_install thermal-engine_install

 acpi_clean:
 	$(call descend,power/acpi,clean)
@ -164,9 +185,18 @@ perf_clean:
 selftests_clean:
 	$(call descend,testing/$(@:_clean=),clean)

+thermal_clean:
+	$(call descend,lib/thermal,clean)
+
 turbostat_clean x86_energy_perf_policy_clean intel-speed-select_clean:
 	$(call descend,power/x86/$(@:_clean=),clean)

+thermometer_clean:
+	$(call descend,thermal/thermometer,clean)
+
+thermal-engine_clean:
+	$(call descend,thermal/thermal-engine,clean)
+
 tmon_clean:
 	$(call descend,thermal/tmon,clean)

@ -181,6 +211,6 @@ clean: acpi_clean cgroup_clean counter_clean cpupower_clean hv_clean firewire_cl
 		vm_clean bpf_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
 		freefall_clean build_clean libbpf_clean libsubcmd_clean \
 		gpio_clean objtool_clean leds_clean wmi_clean pci_clean firmware_clean debugging_clean \
-		intel-speed-select_clean tracing_clean
+		intel-speed-select_clean tracing_clean thermal_clean thermometer_clean thermal-engine_clean

 .PHONY: FORCE
--- a/tools/lib/thermal/.gitignore
+++ b/tools/lib/thermal/.gitignore
@ -0,0 +1,2 @@
+libthermal.so*
+libthermal.pc
--- a/tools/lib/thermal/Build
+++ b/tools/lib/thermal/Build
@ -0,0 +1,5 @@
+libthermal-y += commands.o
+libthermal-y += events.o
+libthermal-y += thermal_nl.o
+libthermal-y += sampling.o
+libthermal-y += thermal.o
--- a/tools/lib/thermal/Makefile
+++ b/tools/lib/thermal/Makefile
@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+# Most of this file is copied from tools/lib/perf/Makefile
+
+LIBTHERMAL_VERSION = 0
+LIBTHERMAL_PATCHLEVEL = 0
+LIBTHERMAL_EXTRAVERSION = 1
+
+MAKEFLAGS += --no-print-directory
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+# $(info Determined 'srctree' to be $(srctree))
+endif
+
+INSTALL = install
+
+# Use DESTDIR for installing into a different root directory.
+# This is useful for building a package. The program will be
+# installed in this directory as if it was the root directory.
+# Then the build tool can move it later.
+DESTDIR ?=
+DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))'
+
+include $(srctree)/tools/scripts/Makefile.include
+include $(srctree)/tools/scripts/Makefile.arch
+
+ifeq ($(LP64), 1)
+  libdir_relative = lib64
+else
+  libdir_relative = lib
+endif
+
+prefix ?=
+libdir = $(prefix)/$(libdir_relative)
+
+# Shell quotes
+libdir_SQ = $(subst ','\'',$(libdir))
+libdir_relative_SQ = $(subst ','\'',$(libdir_relative))
+
+ifeq ("$(origin V)", "command line")
+  VERBOSE = $(V)
+endif
+ifndef VERBOSE
+  VERBOSE = 0
+endif
+
+ifeq ($(VERBOSE),1)
+  Q =
+else
+  Q = @
+endif
+
+# Set compile option CFLAGS
+ifdef EXTRA_CFLAGS
+  CFLAGS := $(EXTRA_CFLAGS)
+else
+  CFLAGS := -g -Wall
+endif
+
+INCLUDES = \
+-I/usr/include/libnl3 \
+-I$(srctree)/tools/lib/thermal/include \
+-I$(srctree)/tools/lib/ \
+-I$(srctree)/tools/include \
+-I$(srctree)/tools/arch/$(SRCARCH)/include/ \
+-I$(srctree)/tools/arch/$(SRCARCH)/include/uapi \
+-I$(srctree)/tools/include/uapi
+
+# Append required CFLAGS
+override CFLAGS += $(EXTRA_WARNINGS)
+override CFLAGS += -Werror -Wall
+override CFLAGS += -fPIC
+override CFLAGS += $(INCLUDES)
+override CFLAGS += -fvisibility=hidden
+override CFGLAS += -Wl,-L.
+override CFGLAS += -Wl,-lthermal
+
+all:
+
+export srctree OUTPUT CC LD CFLAGS V
+export DESTDIR DESTDIR_SQ
+
+include $(srctree)/tools/build/Makefile.include
+
+VERSION_SCRIPT := libthermal.map
+
+PATCHLEVEL    = $(LIBTHERMAL_PATCHLEVEL)
+EXTRAVERSION  = $(LIBTHERMAL_EXTRAVERSION)
+VERSION       = $(LIBTHERMAL_VERSION).$(LIBTHERMAL_PATCHLEVEL).$(LIBTHERMAL_EXTRAVERSION)
+
+LIBTHERMAL_SO := $(OUTPUT)libthermal.so.$(VERSION)
+LIBTHERMAL_A  := $(OUTPUT)libthermal.a
+LIBTHERMAL_IN := $(OUTPUT)libthermal-in.o
+LIBTHERMAL_PC := $(OUTPUT)libthermal.pc
+LIBTHERMAL_ALL := $(LIBTHERMAL_A) $(OUTPUT)libthermal.so*
+
+THERMAL_UAPI := include/uapi/linux/thermal.h
+
+$(THERMAL_UAPI): FORCE
+	ln -sf $(srctree)/$@ $(srctree)/tools/$@
+
+$(LIBTHERMAL_IN): FORCE
+	$(Q)$(MAKE) $(build)=libthermal
+
+$(LIBTHERMAL_A): $(LIBTHERMAL_IN)
+	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIBTHERMAL_IN)
+
+$(LIBTHERMAL_SO): $(LIBTHERMAL_IN)
+	$(QUIET_LINK)$(CC) --shared -Wl,-soname,libthermal.so \
+                                    -Wl,--version-script=$(VERSION_SCRIPT) $^ -o $@
+	@ln -sf $(@F) $(OUTPUT)libthermal.so
+	@ln -sf $(@F) $(OUTPUT)libthermal.so.$(LIBTHERMAL_VERSION)
+
+
+libs: $(THERMAL_UAPI) $(LIBTHERMAL_A) $(LIBTHERMAL_SO) $(LIBTHERMAL_PC)
+
+all: fixdep
+	$(Q)$(MAKE) libs
+
+clean:
+	$(call QUIET_CLEAN, libthermal) $(RM) $(LIBTHERMAL_A) \
+                *.o *~ *.a *.so *.so.$(VERSION) *.so.$(LIBTHERMAL_VERSION) .*.d .*.cmd LIBTHERMAL-CFLAGS $(LIBTHERMAL_PC)
+
+$(LIBTHERMAL_PC):
+	$(QUIET_GEN)sed -e "s|@PREFIX@|$(prefix)|" \
+		-e "s|@LIBDIR@|$(libdir_SQ)|" \
+		-e "s|@VERSION@|$(VERSION)|" \
+		< libthermal.pc.template > $@
+
+define do_install_mkdir
+	if [ ! -d '$(DESTDIR_SQ)$1' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$1'; \
+	fi
+endef
+
+define do_install
+	if [ ! -d '$(DESTDIR_SQ)$2' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \
+	fi;                                             \
+	$(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2'
+endef
+
+install_lib: libs
+	$(call QUIET_INSTALL, $(LIBTHERMAL_ALL)) \
+		$(call do_install_mkdir,$(libdir_SQ)); \
+		cp -fpR $(LIBTHERMAL_ALL) $(DESTDIR)$(libdir_SQ)
+
+install_headers:
+	$(call QUIET_INSTALL, headers) \
+		$(call do_install,include/thermal.h,$(prefix)/include/thermal,644); \
+
+install_pkgconfig: $(LIBTHERMAL_PC)
+	$(call QUIET_INSTALL, $(LIBTHERMAL_PC)) \
+		$(call do_install,$(LIBTHERMAL_PC),$(libdir_SQ)/pkgconfig,644)
+
+install_doc:
+	$(Q)$(MAKE) -C Documentation install-man install-html install-examples
+
+install: install_lib install_headers install_pkgconfig
+
+FORCE:
+
+.PHONY: all install clean FORCE
--- a/tools/lib/thermal/commands.c
+++ b/tools/lib/thermal/commands.c
@ -0,0 +1,349 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#define _GNU_SOURCE
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <thermal.h>
+#include "thermal_nl.h"
+
+static struct nla_policy thermal_genl_policy[THERMAL_GENL_ATTR_MAX + 1] = {
+	/* Thermal zone */
+	[THERMAL_GENL_ATTR_TZ]                  = { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_ID]               = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TEMP]             = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP]             = { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_TRIP_ID]          = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_TEMP]        = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_TYPE]        = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_HYST]        = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_MODE]             = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_CDEV_WEIGHT]      = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_NAME]             = { .type = NLA_STRING },
+
+	/* Governor(s) */
+	[THERMAL_GENL_ATTR_TZ_GOV]              = { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_GOV_NAME]         = { .type = NLA_STRING },
+
+	/* Cooling devices */
+	[THERMAL_GENL_ATTR_CDEV]                = { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_CDEV_ID]             = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_CUR_STATE]      = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_MAX_STATE]      = { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_NAME]           = { .type = NLA_STRING },
+};
+
+static int parse_tz_get(struct genl_info *info, struct thermal_zone **tz)
+{
+	struct nlattr *attr;
+	struct thermal_zone *__tz = NULL;
+	size_t size = 0;
+	int rem;
+
+	nla_for_each_nested(attr, info->attrs[THERMAL_GENL_ATTR_TZ], rem) {
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_TZ_ID) {
+
+			size++;
+
+			__tz = realloc(__tz, sizeof(*__tz) * (size + 2));
+			if (!__tz)
+				return THERMAL_ERROR;
+
+			__tz[size - 1].id = nla_get_u32(attr);
+		}
+
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_TZ_NAME)
+			nla_strlcpy(__tz[size - 1].name, attr,
+				    THERMAL_NAME_LENGTH);
+	}
+
+	if (__tz)
+		__tz[size].id = -1;
+
+	*tz = __tz;
+
+	return THERMAL_SUCCESS;
+}
+
+static int parse_cdev_get(struct genl_info *info, struct thermal_cdev **cdev)
+{
+	struct nlattr *attr;
+	struct thermal_cdev *__cdev = NULL;
+	size_t size = 0;
+	int rem;
+
+	nla_for_each_nested(attr, info->attrs[THERMAL_GENL_ATTR_CDEV], rem) {
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_CDEV_ID) {
+
+			size++;
+
+			__cdev = realloc(__cdev, sizeof(*__cdev) * (size + 2));
+			if (!__cdev)
+				return THERMAL_ERROR;
+
+			__cdev[size - 1].id = nla_get_u32(attr);
+		}
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_CDEV_NAME) {
+			nla_strlcpy(__cdev[size - 1].name, attr,
+				    THERMAL_NAME_LENGTH);
+		}
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_CDEV_CUR_STATE)
+			__cdev[size - 1].cur_state = nla_get_u32(attr);
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_CDEV_MAX_STATE)
+			__cdev[size - 1].max_state = nla_get_u32(attr);
+	}
+
+	if (__cdev)
+		__cdev[size].id = -1;
+
+	*cdev = __cdev;
+
+	return THERMAL_SUCCESS;
+}
+
+static int parse_tz_get_trip(struct genl_info *info, struct thermal_zone *tz)
+{
+	struct nlattr *attr;
+	struct thermal_trip *__tt = NULL;
+	size_t size = 0;
+	int rem;
+
+	nla_for_each_nested(attr, info->attrs[THERMAL_GENL_ATTR_TZ_TRIP], rem) {
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_TZ_TRIP_ID) {
+
+			size++;
+
+			__tt = realloc(__tt, sizeof(*__tt) * (size + 2));
+			if (!__tt)
+				return THERMAL_ERROR;
+
+			__tt[size - 1].id = nla_get_u32(attr);
+		}
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_TZ_TRIP_TYPE)
+			__tt[size - 1].type = nla_get_u32(attr);
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_TZ_TRIP_TEMP)
+			__tt[size - 1].temp = nla_get_u32(attr);
+
+		if (nla_type(attr) == THERMAL_GENL_ATTR_TZ_TRIP_HYST)
+			__tt[size - 1].hyst = nla_get_u32(attr);
+	}
+
+	if (__tt)
+		__tt[size].id = -1;
+
+	tz->trip = __tt;
+
+	return THERMAL_SUCCESS;
+}
+
+static int parse_tz_get_temp(struct genl_info *info, struct thermal_zone *tz)
+{
+	int id = -1;
+
+	if (info->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		id = nla_get_u32(info->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	if (tz->id != id)
+		return THERMAL_ERROR;
+
+	if (info->attrs[THERMAL_GENL_ATTR_TZ_TEMP])
+		tz->temp = nla_get_u32(info->attrs[THERMAL_GENL_ATTR_TZ_TEMP]);
+
+	return THERMAL_SUCCESS;
+}
+
+static int parse_tz_get_gov(struct genl_info *info, struct thermal_zone *tz)
+{
+	int id = -1;
+
+	if (info->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		id = nla_get_u32(info->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	if (tz->id != id)
+		return THERMAL_ERROR;
+
+	if (info->attrs[THERMAL_GENL_ATTR_TZ_GOV_NAME]) {
+		nla_strlcpy(tz->governor,
+			    info->attrs[THERMAL_GENL_ATTR_TZ_GOV_NAME],
+			    THERMAL_NAME_LENGTH);
+	}
+
+	return THERMAL_SUCCESS;
+}
+
+static int handle_netlink(struct nl_cache_ops *unused,
+			  struct genl_cmd *cmd,
+			  struct genl_info *info, void *arg)
+{
+	int ret;
+
+	switch (cmd->c_id) {
+
+	case THERMAL_GENL_CMD_TZ_GET_ID:
+		ret = parse_tz_get(info, arg);
+		break;
+
+	case THERMAL_GENL_CMD_CDEV_GET:
+		ret = parse_cdev_get(info, arg);
+		break;
+
+	case THERMAL_GENL_CMD_TZ_GET_TEMP:
+		ret = parse_tz_get_temp(info, arg);
+		break;
+
+	case THERMAL_GENL_CMD_TZ_GET_TRIP:
+		ret = parse_tz_get_trip(info, arg);
+		break;
+
+	case THERMAL_GENL_CMD_TZ_GET_GOV:
+		ret = parse_tz_get_gov(info, arg);
+		break;
+
+	default:
+		return THERMAL_ERROR;
+	}
+
+	return ret;
+}
+
+static struct genl_cmd thermal_cmds[] = {
+	{
+		.c_id		= THERMAL_GENL_CMD_TZ_GET_ID,
+		.c_name		= (char *)"List thermal zones",
+		.c_msg_parser	= handle_netlink,
+		.c_maxattr	= THERMAL_GENL_ATTR_MAX,
+		.c_attr_policy	= thermal_genl_policy,
+	},
+	{
+		.c_id		= THERMAL_GENL_CMD_TZ_GET_GOV,
+		.c_name		= (char *)"Get governor",
+		.c_msg_parser	= handle_netlink,
+		.c_maxattr	= THERMAL_GENL_ATTR_MAX,
+		.c_attr_policy	= thermal_genl_policy,
+	},
+	{
+		.c_id		= THERMAL_GENL_CMD_TZ_GET_TEMP,
+		.c_name		= (char *)"Get thermal zone temperature",
+		.c_msg_parser	= handle_netlink,
+		.c_maxattr	= THERMAL_GENL_ATTR_MAX,
+		.c_attr_policy	= thermal_genl_policy,
+	},
+	{
+		.c_id		= THERMAL_GENL_CMD_TZ_GET_TRIP,
+		.c_name		= (char *)"Get thermal zone trip points",
+		.c_msg_parser	= handle_netlink,
+		.c_maxattr	= THERMAL_GENL_ATTR_MAX,
+		.c_attr_policy	= thermal_genl_policy,
+	},
+	{
+		.c_id		= THERMAL_GENL_CMD_CDEV_GET,
+		.c_name		= (char *)"Get cooling devices",
+		.c_msg_parser	= handle_netlink,
+		.c_maxattr	= THERMAL_GENL_ATTR_MAX,
+		.c_attr_policy	= thermal_genl_policy,
+	},
+};
+
+static struct genl_ops thermal_cmd_ops = {
+	.o_name		= (char *)"thermal",
+	.o_cmds		= thermal_cmds,
+	.o_ncmds	= ARRAY_SIZE(thermal_cmds),
+};
+
+static thermal_error_t thermal_genl_auto(struct thermal_handler *th, int id, int cmd,
+					 int flags, void *arg)
+{
+	struct nl_msg *msg;
+	void *hdr;
+
+	msg = nlmsg_alloc();
+	if (!msg)
+		return THERMAL_ERROR;
+
+	hdr = genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, thermal_cmd_ops.o_id,
+			  0, flags, cmd, THERMAL_GENL_VERSION);
+	if (!hdr)
+		return THERMAL_ERROR;
+
+	if (id >= 0 && nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, id))
+		return THERMAL_ERROR;
+
+	if (nl_send_msg(th->sk_cmd, th->cb_cmd, msg, genl_handle_msg, arg))
+		return THERMAL_ERROR;
+
+	nlmsg_free(msg);
+
+	return THERMAL_SUCCESS;
+}
+
+thermal_error_t thermal_cmd_get_tz(struct thermal_handler *th, struct thermal_zone **tz)
+{
+	return thermal_genl_auto(th, -1, THERMAL_GENL_CMD_TZ_GET_ID,
+				 NLM_F_DUMP | NLM_F_ACK, tz);
+}
+
+thermal_error_t thermal_cmd_get_cdev(struct thermal_handler *th, struct thermal_cdev **tc)
+{
+	return thermal_genl_auto(th, -1, THERMAL_GENL_CMD_CDEV_GET,
+				 NLM_F_DUMP | NLM_F_ACK, tc);
+}
+
+thermal_error_t thermal_cmd_get_trip(struct thermal_handler *th, struct thermal_zone *tz)
+{
+	return thermal_genl_auto(th, tz->id, THERMAL_GENL_CMD_TZ_GET_TRIP,
+				 0, tz);
+}
+
+thermal_error_t thermal_cmd_get_governor(struct thermal_handler *th, struct thermal_zone *tz)
+{
+	return thermal_genl_auto(th, tz->id, THERMAL_GENL_CMD_TZ_GET_GOV, 0, tz);
+}
+
+thermal_error_t thermal_cmd_get_temp(struct thermal_handler *th, struct thermal_zone *tz)
+{
+	return thermal_genl_auto(th, tz->id, THERMAL_GENL_CMD_TZ_GET_TEMP, 0, tz);
+}
+
+thermal_error_t thermal_cmd_exit(struct thermal_handler *th)
+{
+	if (genl_unregister_family(&thermal_cmd_ops))
+		return THERMAL_ERROR;
+
+	nl_thermal_disconnect(th->sk_cmd, th->cb_cmd);
+
+	return THERMAL_SUCCESS;
+}
+
+thermal_error_t thermal_cmd_init(struct thermal_handler *th)
+{
+	int ret;
+	int family;
+
+	if (nl_thermal_connect(&th->sk_cmd, &th->cb_cmd))
+		return THERMAL_ERROR;
+
+	ret = genl_register_family(&thermal_cmd_ops);
+	if (ret)
+		return THERMAL_ERROR;
+
+	ret = genl_ops_resolve(th->sk_cmd, &thermal_cmd_ops);
+	if (ret)
+		return THERMAL_ERROR;
+
+	family = genl_ctrl_resolve(th->sk_cmd, "nlctrl");
+	if (family != GENL_ID_CTRL)
+		return THERMAL_ERROR;
+
+	return THERMAL_SUCCESS;
+}
--- a/tools/lib/thermal/events.c
+++ b/tools/lib/thermal/events.c
@ -0,0 +1,164 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#include <linux/netlink.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+
+#include <thermal.h>
+#include "thermal_nl.h"
+
+/*
+ * Optimization: fill this array to tell which event we do want to pay
+ * attention to. That happens at init time with the ops
+ * structure. Each ops will enable the event and the general handler
+ * will be able to discard the event if there is not ops associated
+ * with it.
+ */
+static int enabled_ops[__THERMAL_GENL_EVENT_MAX];
+
+static int handle_thermal_event(struct nl_msg *n, void *arg)
+{
+	struct nlmsghdr *nlh = nlmsg_hdr(n);
+	struct genlmsghdr *genlhdr = genlmsg_hdr(nlh);
+	struct nlattr *attrs[THERMAL_GENL_ATTR_MAX + 1];
+	struct thermal_handler_param *thp = arg;
+	struct thermal_events_ops *ops = &thp->th->ops->events;
+
+	genlmsg_parse(nlh, 0, attrs, THERMAL_GENL_ATTR_MAX, NULL);
+
+	arg = thp->arg;
+
+	/*
+	 * This is an event we don't care of, bail out.
+	 */
+	if (!enabled_ops[genlhdr->cmd])
+		return THERMAL_SUCCESS;
+
+	switch (genlhdr->cmd) {
+
+	case THERMAL_GENL_EVENT_TZ_CREATE:
+		return ops->tz_create(nla_get_string(attrs[THERMAL_GENL_ATTR_TZ_NAME]),
+				      nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_DELETE:
+		return ops->tz_delete(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_ENABLE:
+		return ops->tz_enable(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_DISABLE:
+		return ops->tz_disable(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_TRIP_CHANGE:
+		return ops->trip_change(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]),
+					nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_ID]),
+					nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_TYPE]),
+					nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_TEMP]),
+					nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_HYST]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_TRIP_ADD:
+		return ops->trip_add(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_ID]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_TYPE]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_TEMP]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_HYST]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_TRIP_DELETE:
+		return ops->trip_delete(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]),
+					nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_ID]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_TRIP_UP:
+		return ops->trip_high(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]),
+				      nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_ID]),
+				      nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TEMP]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_TRIP_DOWN:
+		return ops->trip_low(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TRIP_ID]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TEMP]), arg);
+
+	case THERMAL_GENL_EVENT_CDEV_ADD:
+		return ops->cdev_add(nla_get_string(attrs[THERMAL_GENL_ATTR_CDEV_NAME]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_CDEV_ID]),
+				     nla_get_u32(attrs[THERMAL_GENL_ATTR_CDEV_MAX_STATE]), arg);
+
+	case THERMAL_GENL_EVENT_CDEV_DELETE:
+		return ops->cdev_delete(nla_get_u32(attrs[THERMAL_GENL_ATTR_CDEV_ID]), arg);
+
+	case THERMAL_GENL_EVENT_CDEV_STATE_UPDATE:
+		return ops->cdev_update(nla_get_u32(attrs[THERMAL_GENL_ATTR_CDEV_ID]),
+					nla_get_u32(attrs[THERMAL_GENL_ATTR_CDEV_CUR_STATE]), arg);
+
+	case THERMAL_GENL_EVENT_TZ_GOV_CHANGE:
+		return ops->gov_change(nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]),
+				       nla_get_string(attrs[THERMAL_GENL_ATTR_GOV_NAME]), arg);
+	default:
+		return -1;
+	}
+}
+
+static void thermal_events_ops_init(struct thermal_events_ops *ops)
+{
+	enabled_ops[THERMAL_GENL_EVENT_TZ_CREATE]	= !!ops->tz_create;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_DELETE]	= !!ops->tz_delete;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_DISABLE]	= !!ops->tz_disable;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_ENABLE]	= !!ops->tz_enable;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_TRIP_UP]	= !!ops->trip_high;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_TRIP_DOWN]	= !!ops->trip_low;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_TRIP_CHANGE]	= !!ops->trip_change;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_TRIP_ADD]	= !!ops->trip_add;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_TRIP_DELETE]	= !!ops->trip_delete;
+	enabled_ops[THERMAL_GENL_EVENT_CDEV_ADD]	= !!ops->cdev_add;
+	enabled_ops[THERMAL_GENL_EVENT_CDEV_DELETE]	= !!ops->cdev_delete;
+	enabled_ops[THERMAL_GENL_EVENT_CDEV_STATE_UPDATE] = !!ops->cdev_update;
+	enabled_ops[THERMAL_GENL_EVENT_TZ_GOV_CHANGE]	= !!ops->gov_change;
+}
+
+thermal_error_t thermal_events_handle(struct thermal_handler *th, void *arg)
+{
+	struct thermal_handler_param thp = { .th = th, .arg = arg };
+
+	if (!th)
+		return THERMAL_ERROR;
+
+	if (nl_cb_set(th->cb_event, NL_CB_VALID, NL_CB_CUSTOM,
+		      handle_thermal_event, &thp))
+		return THERMAL_ERROR;
+
+	return nl_recvmsgs(th->sk_event, th->cb_event);
+}
+
+int thermal_events_fd(struct thermal_handler *th)
+{
+	if (!th)
+		return -1;
+
+	return nl_socket_get_fd(th->sk_event);
+}
+
+thermal_error_t thermal_events_exit(struct thermal_handler *th)
+{
+	if (nl_unsubscribe_thermal(th->sk_event, th->cb_event,
+				   THERMAL_GENL_EVENT_GROUP_NAME))
+		return THERMAL_ERROR;
+
+	nl_thermal_disconnect(th->sk_event, th->cb_event);
+
+	return THERMAL_SUCCESS;
+}
+
+thermal_error_t thermal_events_init(struct thermal_handler *th)
+{
+	thermal_events_ops_init(&th->ops->events);
+
+	if (nl_thermal_connect(&th->sk_event, &th->cb_event))
+		return THERMAL_ERROR;
+
+	if (nl_subscribe_thermal(th->sk_event, th->cb_event,
+				 THERMAL_GENL_EVENT_GROUP_NAME))
+		return THERMAL_ERROR;
+
+	return THERMAL_SUCCESS;
+}
--- a/tools/lib/thermal/include/thermal.h
+++ b/tools/lib/thermal/include/thermal.h
@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: LGPL-2.1+ */
+/* Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org> */
+#ifndef __LIBTHERMAL_H
+#define __LIBTHERMAL_H
+
+#include <linux/thermal.h>
+
+#ifndef LIBTHERMAL_API
+#define LIBTHERMAL_API __attribute__((visibility("default")))
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct thermal_sampling_ops {
+	int (*tz_temp)(int tz_id, int temp, void *arg);
+};
+
+struct thermal_events_ops {
+	int (*tz_create)(const char *name, int tz_id, void *arg);
+	int (*tz_delete)(int tz_id, void *arg);
+	int (*tz_enable)(int tz_id, void *arg);
+	int (*tz_disable)(int tz_id, void *arg);
+	int (*trip_high)(int tz_id, int trip_id, int temp, void *arg);
+	int (*trip_low)(int tz_id, int trip_id, int temp, void *arg);
+	int (*trip_add)(int tz_id, int trip_id, int type, int temp, int hyst, void *arg);
+	int (*trip_change)(int tz_id, int trip_id, int type, int temp, int hyst, void *arg);
+	int (*trip_delete)(int tz_id, int trip_id, void *arg);
+	int (*cdev_add)(const char *name, int cdev_id, int max_state, void *arg);
+	int (*cdev_delete)(int cdev_id, void *arg);
+	int (*cdev_update)(int cdev_id, int cur_state, void *arg);
+	int (*gov_change)(int tz_id, const char *gov_name, void *arg);
+};
+
+struct thermal_ops {
+	struct thermal_sampling_ops sampling;
+	struct thermal_events_ops events;
+};
+
+struct thermal_trip {
+	int id;
+	int type;
+	int temp;
+	int hyst;
+};
+
+struct thermal_zone {
+	int id;
+	int temp;
+	char name[THERMAL_NAME_LENGTH];
+	char governor[THERMAL_NAME_LENGTH];
+	struct thermal_trip *trip;
+};
+
+struct thermal_cdev {
+	int id;
+	char name[THERMAL_NAME_LENGTH];
+	int max_state;
+	int min_state;
+	int cur_state;
+};
+
+typedef enum {
+	THERMAL_ERROR = -1,
+	THERMAL_SUCCESS = 0,
+} thermal_error_t;
+
+struct thermal_handler;
+
+typedef int (*cb_tz_t)(struct thermal_zone *, void *);
+
+typedef int (*cb_tt_t)(struct thermal_trip *, void *);
+
+typedef int (*cb_tc_t)(struct thermal_cdev *, void *);
+
+LIBTHERMAL_API int for_each_thermal_zone(struct thermal_zone *tz, cb_tz_t cb, void *arg);
+
+LIBTHERMAL_API int for_each_thermal_trip(struct thermal_trip *tt, cb_tt_t cb, void *arg);
+
+LIBTHERMAL_API int for_each_thermal_cdev(struct thermal_cdev *cdev, cb_tc_t cb, void *arg);
+
+LIBTHERMAL_API struct thermal_zone *thermal_zone_find_by_name(struct thermal_zone *tz,
+							      const char *name);
+
+LIBTHERMAL_API struct thermal_zone *thermal_zone_find_by_id(struct thermal_zone *tz, int id);
+
+LIBTHERMAL_API struct thermal_zone *thermal_zone_discover(struct thermal_handler *th);
+
+LIBTHERMAL_API struct thermal_handler *thermal_init(struct thermal_ops *ops);
+
+LIBTHERMAL_API void thermal_exit(struct thermal_handler *th);
+
+/*
+ * Netlink thermal events
+ */
+LIBTHERMAL_API thermal_error_t thermal_events_exit(struct thermal_handler *th);
+
+LIBTHERMAL_API thermal_error_t thermal_events_init(struct thermal_handler *th);
+
+LIBTHERMAL_API thermal_error_t thermal_events_handle(struct thermal_handler *th, void *arg);
+
+LIBTHERMAL_API int thermal_events_fd(struct thermal_handler *th);
+
+/*
+ * Netlink thermal commands
+ */
+LIBTHERMAL_API thermal_error_t thermal_cmd_exit(struct thermal_handler *th);
+
+LIBTHERMAL_API thermal_error_t thermal_cmd_init(struct thermal_handler *th);
+
+LIBTHERMAL_API thermal_error_t thermal_cmd_get_tz(struct thermal_handler *th,
+						  struct thermal_zone **tz);
+
+LIBTHERMAL_API thermal_error_t thermal_cmd_get_cdev(struct thermal_handler *th,
+						    struct thermal_cdev **tc);
+
+LIBTHERMAL_API thermal_error_t thermal_cmd_get_trip(struct thermal_handler *th,
+						    struct thermal_zone *tz);
+
+LIBTHERMAL_API thermal_error_t thermal_cmd_get_governor(struct thermal_handler *th,
+							struct thermal_zone *tz);
+
+LIBTHERMAL_API thermal_error_t thermal_cmd_get_temp(struct thermal_handler *th,
+						    struct thermal_zone *tz);
+
+/*
+ * Netlink thermal samples
+ */
+LIBTHERMAL_API thermal_error_t thermal_sampling_exit(struct thermal_handler *th);
+
+LIBTHERMAL_API thermal_error_t thermal_sampling_init(struct thermal_handler *th);
+
+LIBTHERMAL_API thermal_error_t thermal_sampling_handle(struct thermal_handler *th, void *arg);
+
+LIBTHERMAL_API int thermal_sampling_fd(struct thermal_handler *th);
+
+#endif /* __LIBTHERMAL_H */
+
+#ifdef __cplusplus
+}
+#endif
--- a/tools/lib/thermal/libthermal.map
+++ b/tools/lib/thermal/libthermal.map
@ -0,0 +1,25 @@
+LIBTHERMAL_0.0.1 {
+	global:
+		thermal_init;
+		for_each_thermal_zone;
+		for_each_thermal_trip;
+		for_each_thermal_cdev;
+		thermal_zone_find_by_name;
+		thermal_zone_find_by_id;
+		thermal_zone_discover;
+		thermal_init;
+		thermal_events_init;
+		thermal_events_handle;
+		thermal_events_fd;
+		thermal_cmd_init;
+		thermal_cmd_get_tz;
+		thermal_cmd_get_cdev;
+		thermal_cmd_get_trip;
+		thermal_cmd_get_governor;
+		thermal_cmd_get_temp;
+		thermal_sampling_init;
+		thermal_sampling_handle;
+		thermal_sampling_fd;
+local:
+		*;
+};
--- a/tools/lib/thermal/libthermal.pc.template
+++ b/tools/lib/thermal/libthermal.pc.template
@ -0,0 +1,12 @@
+# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+
+prefix=@PREFIX@
+libdir=@LIBDIR@
+includedir=${prefix}/include
+
+Name: libthermal
+Description: thermal library
+Requires: libnl-3.0 libnl-genl-3.0
+Version: @VERSION@
+Libs: -L${libdir} -lnl-genl-3 -lnl-3
+Cflags: -I${includedir} -I{include}/libnl3
--- a/tools/lib/thermal/sampling.c
+++ b/tools/lib/thermal/sampling.c
@ -0,0 +1,75 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <thermal.h>
+#include "thermal_nl.h"
+
+static int handle_thermal_sample(struct nl_msg *n, void *arg)
+{
+	struct nlmsghdr *nlh = nlmsg_hdr(n);
+	struct genlmsghdr *genlhdr = genlmsg_hdr(nlh);
+	struct nlattr *attrs[THERMAL_GENL_ATTR_MAX + 1];
+	struct thermal_handler_param *thp = arg;
+	struct thermal_handler *th = thp->th;
+
+	genlmsg_parse(nlh, 0, attrs, THERMAL_GENL_ATTR_MAX, NULL);
+
+	switch (genlhdr->cmd) {
+
+	case THERMAL_GENL_SAMPLING_TEMP:
+		return th->ops->sampling.tz_temp(
+			nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_ID]),
+			nla_get_u32(attrs[THERMAL_GENL_ATTR_TZ_TEMP]), arg);
+	default:
+		return THERMAL_ERROR;
+	}
+}
+
+thermal_error_t thermal_sampling_handle(struct thermal_handler *th, void *arg)
+{
+	struct thermal_handler_param thp = { .th = th, .arg = arg };
+
+	if (!th)
+		return THERMAL_ERROR;
+
+	if (nl_cb_set(th->cb_sampling, NL_CB_VALID, NL_CB_CUSTOM,
+		      handle_thermal_sample, &thp))
+		return THERMAL_ERROR;
+
+	return nl_recvmsgs(th->sk_sampling, th->cb_sampling);
+}
+
+int thermal_sampling_fd(struct thermal_handler *th)
+{
+	if (!th)
+		return -1;
+
+	return nl_socket_get_fd(th->sk_sampling);
+}
+
+thermal_error_t thermal_sampling_exit(struct thermal_handler *th)
+{
+	if (nl_unsubscribe_thermal(th->sk_sampling, th->cb_sampling,
+				   THERMAL_GENL_EVENT_GROUP_NAME))
+		return THERMAL_ERROR;
+
+	nl_thermal_disconnect(th->sk_sampling, th->cb_sampling);
+
+	return THERMAL_SUCCESS;
+}
+
+thermal_error_t thermal_sampling_init(struct thermal_handler *th)
+{
+	if (nl_thermal_connect(&th->sk_sampling, &th->cb_sampling))
+		return THERMAL_ERROR;
+
+	if (nl_subscribe_thermal(th->sk_sampling, th->cb_sampling,
+				 THERMAL_GENL_SAMPLING_GROUP_NAME))
+		return THERMAL_ERROR;
+
+	return THERMAL_SUCCESS;
+}
--- a/tools/lib/thermal/thermal.c
+++ b/tools/lib/thermal/thermal.c
@ -0,0 +1,135 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#include <stdio.h>
+#include <thermal.h>
+
+#include "thermal_nl.h"
+
+int for_each_thermal_cdev(struct thermal_cdev *cdev, cb_tc_t cb, void *arg)
+{
+	int i, ret = 0;
+
+	if (!cdev)
+		return 0;
+
+	for (i = 0; cdev[i].id != -1; i++)
+		ret |= cb(&cdev[i], arg);
+
+	return ret;
+}
+
+int for_each_thermal_trip(struct thermal_trip *tt, cb_tt_t cb, void *arg)
+{
+	int i, ret = 0;
+
+	if (!tt)
+		return 0;
+
+	for (i = 0; tt[i].id != -1; i++)
+		ret |= cb(&tt[i], arg);
+
+	return ret;
+}
+
+int for_each_thermal_zone(struct thermal_zone *tz, cb_tz_t cb, void *arg)
+{
+	int i, ret = 0;
+
+	if (!tz)
+		return 0;
+
+	for (i = 0; tz[i].id != -1; i++)
+		ret |= cb(&tz[i], arg);
+
+	return ret;
+}
+
+struct thermal_zone *thermal_zone_find_by_name(struct thermal_zone *tz,
+					       const char *name)
+{
+	int i;
+
+	if (!tz || !name)
+		return NULL;
+
+	for (i = 0; tz[i].id != -1; i++) {
+		if (!strcmp(tz[i].name, name))
+			return &tz[i];
+	}
+
+	return NULL;
+}
+
+struct thermal_zone *thermal_zone_find_by_id(struct thermal_zone *tz, int id)
+{
+	int i;
+
+	if (!tz || id < 0)
+		return NULL;
+
+	for (i = 0; tz[i].id != -1; i++) {
+		if (tz[i].id == id)
+			return &tz[i];
+	}
+
+	return NULL;
+}
+
+static int __thermal_zone_discover(struct thermal_zone *tz, void *th)
+{
+	if (thermal_cmd_get_trip(th, tz) < 0)
+		return -1;
+
+	if (thermal_cmd_get_governor(th, tz))
+		return -1;
+
+	return 0;
+}
+
+struct thermal_zone *thermal_zone_discover(struct thermal_handler *th)
+{
+	struct thermal_zone *tz;
+
+	if (thermal_cmd_get_tz(th, &tz) < 0)
+		return NULL;
+
+	if (for_each_thermal_zone(tz, __thermal_zone_discover, th))
+		return NULL;
+
+	return tz;
+}
+
+void thermal_exit(struct thermal_handler *th)
+{
+	thermal_cmd_exit(th);
+	thermal_events_exit(th);
+	thermal_sampling_exit(th);
+
+	free(th);
+}
+
+struct thermal_handler *thermal_init(struct thermal_ops *ops)
+{
+	struct thermal_handler *th;
+
+	th = malloc(sizeof(*th));
+	if (!th)
+		return NULL;
+	th->ops = ops;
+
+	if (thermal_events_init(th))
+		goto out_free;
+
+	if (thermal_sampling_init(th))
+		goto out_free;
+
+	if (thermal_cmd_init(th))
+		goto out_free;
+
+	return th;
+
+out_free:
+	free(th);
+
+	return NULL;
+}
--- a/tools/lib/thermal/thermal_nl.c
+++ b/tools/lib/thermal/thermal_nl.c
@ -0,0 +1,215 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <thermal.h>
+#include "thermal_nl.h"
+
+struct handler_args {
+	const char *group;
+	int id;
+};
+
+static __thread int err;
+static __thread int done;
+
+static int nl_seq_check_handler(struct nl_msg *msg, void *arg)
+{
+	return NL_OK;
+}
+
+static int nl_error_handler(struct sockaddr_nl *nla, struct nlmsgerr *nl_err,
+			    void *arg)
+{
+	int *ret = arg;
+
+	if (ret)
+		*ret = nl_err->error;
+
+	return NL_STOP;
+}
+
+static int nl_finish_handler(struct nl_msg *msg, void *arg)
+{
+	int *ret = arg;
+
+	if (ret)
+		*ret = 1;
+
+	return NL_OK;
+}
+
+static int nl_ack_handler(struct nl_msg *msg, void *arg)
+{
+	int *ret = arg;
+
+	if (ret)
+		*ret = 1;
+
+	return NL_OK;
+}
+
+int nl_send_msg(struct nl_sock *sock, struct nl_cb *cb, struct nl_msg *msg,
+		int (*rx_handler)(struct nl_msg *, void *), void *data)
+{
+	if (!rx_handler)
+		return THERMAL_ERROR;
+
+	err = nl_send_auto_complete(sock, msg);
+	if (err < 0)
+		return err;
+
+	nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, rx_handler, data);
+
+	err = done = 0;
+
+	while (err == 0 && done == 0)
+		nl_recvmsgs(sock, cb);
+
+	return err;
+}
+
+static int nl_family_handler(struct nl_msg *msg, void *arg)
+{
+	struct handler_args *grp = arg;
+	struct nlattr *tb[CTRL_ATTR_MAX + 1];
+	struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg));
+	struct nlattr *mcgrp;
+	int rem_mcgrp;
+
+	nla_parse(tb, CTRL_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
+		  genlmsg_attrlen(gnlh, 0), NULL);
+
+	if (!tb[CTRL_ATTR_MCAST_GROUPS])
+		return THERMAL_ERROR;
+
+	nla_for_each_nested(mcgrp, tb[CTRL_ATTR_MCAST_GROUPS], rem_mcgrp) {
+
+		struct nlattr *tb_mcgrp[CTRL_ATTR_MCAST_GRP_MAX + 1];
+
+		nla_parse(tb_mcgrp, CTRL_ATTR_MCAST_GRP_MAX,
+			  nla_data(mcgrp), nla_len(mcgrp), NULL);
+
+		if (!tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME] ||
+		    !tb_mcgrp[CTRL_ATTR_MCAST_GRP_ID])
+			continue;
+
+		if (strncmp(nla_data(tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME]),
+			    grp->group,
+			    nla_len(tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME])))
+			continue;
+
+		grp->id = nla_get_u32(tb_mcgrp[CTRL_ATTR_MCAST_GRP_ID]);
+
+		break;
+	}
+
+	return THERMAL_SUCCESS;
+}
+
+static int nl_get_multicast_id(struct nl_sock *sock, struct nl_cb *cb,
+			       const char *family, const char *group)
+{
+	struct nl_msg *msg;
+	int ret = 0, ctrlid;
+	struct handler_args grp = {
+		.group = group,
+		.id = -ENOENT,
+	};
+
+	msg = nlmsg_alloc();
+	if (!msg)
+		return THERMAL_ERROR;
+
+	ctrlid = genl_ctrl_resolve(sock, "nlctrl");
+
+	genlmsg_put(msg, 0, 0, ctrlid, 0, 0, CTRL_CMD_GETFAMILY, 0);
+
+	nla_put_string(msg, CTRL_ATTR_FAMILY_NAME, family);
+
+	ret = nl_send_msg(sock, cb, msg, nl_family_handler, &grp);
+	if (ret)
+		goto nla_put_failure;
+
+	ret = grp.id;
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return ret;
+}
+
+int nl_thermal_connect(struct nl_sock **nl_sock, struct nl_cb **nl_cb)
+{
+	struct nl_cb *cb;
+	struct nl_sock *sock;
+
+	cb = nl_cb_alloc(NL_CB_DEFAULT);
+	if (!cb)
+		return THERMAL_ERROR;
+
+	sock = nl_socket_alloc();
+	if (!sock)
+		goto out_cb_free;
+
+	if (genl_connect(sock))
+		goto out_socket_free;
+
+	if (nl_cb_err(cb, NL_CB_CUSTOM, nl_error_handler, &err) ||
+	    nl_cb_set(cb, NL_CB_FINISH, NL_CB_CUSTOM, nl_finish_handler, &done) ||
+	    nl_cb_set(cb, NL_CB_ACK, NL_CB_CUSTOM, nl_ack_handler, &done) ||
+	    nl_cb_set(cb, NL_CB_SEQ_CHECK, NL_CB_CUSTOM, nl_seq_check_handler, &done))
+		return THERMAL_ERROR;
+
+	*nl_sock = sock;
+	*nl_cb = cb;
+
+	return THERMAL_SUCCESS;
+
+out_socket_free:
+	nl_socket_free(sock);
+out_cb_free:
+	nl_cb_put(cb);
+	return THERMAL_ERROR;
+}
+
+void nl_thermal_disconnect(struct nl_sock *nl_sock, struct nl_cb *nl_cb)
+{
+	nl_close(nl_sock);
+	nl_socket_free(nl_sock);
+	nl_cb_put(nl_cb);
+}
+
+int nl_unsubscribe_thermal(struct nl_sock *nl_sock, struct nl_cb *nl_cb,
+			   const char *group)
+{
+	int mcid;
+
+	mcid = nl_get_multicast_id(nl_sock, nl_cb, THERMAL_GENL_FAMILY_NAME,
+				   group);
+	if (mcid < 0)
+		return THERMAL_ERROR;
+
+	if (nl_socket_drop_membership(nl_sock, mcid))
+		return THERMAL_ERROR;
+
+	return THERMAL_SUCCESS;
+}
+
+int nl_subscribe_thermal(struct nl_sock *nl_sock, struct nl_cb *nl_cb,
+			 const char *group)
+{
+	int mcid;
+
+	mcid = nl_get_multicast_id(nl_sock, nl_cb, THERMAL_GENL_FAMILY_NAME,
+				   group);
+	if (mcid < 0)
+		return THERMAL_ERROR;
+
+	if (nl_socket_add_membership(nl_sock, mcid))
+		return THERMAL_ERROR;
+
+	return THERMAL_SUCCESS;
+}
--- a/tools/lib/thermal/thermal_nl.h
+++ b/tools/lib/thermal/thermal_nl.h
@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: LGPL-2.1+ */
+/* Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org> */
+#ifndef __THERMAL_H
+#define __THERMAL_H
+
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/mngt.h>
+#include <netlink/genl/ctrl.h>
+
+struct thermal_handler {
+	int done;
+	int error;
+	struct thermal_ops *ops;
+	struct nl_msg *msg;
+	struct nl_sock *sk_event;
+	struct nl_sock *sk_sampling;
+	struct nl_sock *sk_cmd;
+	struct nl_cb *cb_cmd;
+	struct nl_cb *cb_event;
+	struct nl_cb *cb_sampling;
+};
+
+struct thermal_handler_param {
+	struct thermal_handler *th;
+	void *arg;
+};
+
+/*
+ * Low level netlink
+ */
+extern int nl_subscribe_thermal(struct nl_sock *nl_sock, struct nl_cb *nl_cb,
+				const char *group);
+
+extern int nl_unsubscribe_thermal(struct nl_sock *nl_sock, struct nl_cb *nl_cb,
+				  const char *group);
+
+extern int nl_thermal_connect(struct nl_sock **nl_sock, struct nl_cb **nl_cb);
+
+extern void nl_thermal_disconnect(struct nl_sock *nl_sock, struct nl_cb *nl_cb);
+
+extern int nl_send_msg(struct nl_sock *sock, struct nl_cb *nl_cb, struct nl_msg *msg,
+		       int (*rx_handler)(struct nl_msg *, void *),
+		       void *data);
+
+#endif /* __THERMAL_H */
--- a/tools/thermal/lib/Build
+++ b/tools/thermal/lib/Build
@ -0,0 +1,3 @@
+libthermal_tools-y += mainloop.o
+libthermal_tools-y += log.o
+libthermal_tools-y += uptimeofday.o
--- a/tools/thermal/lib/Makefile
+++ b/tools/thermal/lib/Makefile
@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+# Most of this file is copied from tools/lib/perf/Makefile
+
+LIBTHERMAL_TOOLS_VERSION = 0
+LIBTHERMAL_TOOLS_PATCHLEVEL = 0
+LIBTHERMAL_TOOLS_EXTRAVERSION = 1
+
+MAKEFLAGS += --no-print-directory
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+# $(info Determined 'srctree' to be $(srctree))
+endif
+
+INSTALL = install
+
+# Use DESTDIR for installing into a different root directory.
+# This is useful for building a package. The program will be
+# installed in this directory as if it was the root directory.
+# Then the build tool can move it later.
+DESTDIR ?=
+DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))'
+
+include $(srctree)/tools/scripts/Makefile.include
+include $(srctree)/tools/scripts/Makefile.arch
+
+ifeq ($(LP64), 1)
+  libdir_relative = lib64
+else
+  libdir_relative = lib
+endif
+
+prefix ?=
+libdir = $(prefix)/$(libdir_relative)
+
+# Shell quotes
+libdir_SQ = $(subst ','\'',$(libdir))
+libdir_relative_SQ = $(subst ','\'',$(libdir_relative))
+
+ifeq ("$(origin V)", "command line")
+  VERBOSE = $(V)
+endif
+ifndef VERBOSE
+  VERBOSE = 0
+endif
+
+ifeq ($(VERBOSE),1)
+  Q =
+else
+  Q = @
+endif
+
+# Set compile option CFLAGS
+ifdef EXTRA_CFLAGS
+  CFLAGS := $(EXTRA_CFLAGS)
+else
+  CFLAGS := -g -Wall
+endif
+
+INCLUDES = \
+-I/usr/include/libnl3 \
+-I$(srctree)/tools/lib/thermal/include \
+-I$(srctree)/tools/lib/ \
+-I$(srctree)/tools/include \
+-I$(srctree)/tools/arch/$(SRCARCH)/include/ \
+-I$(srctree)/tools/arch/$(SRCARCH)/include/uapi \
+-I$(srctree)/tools/include/uapi
+
+# Append required CFLAGS
+override CFLAGS += $(EXTRA_WARNINGS)
+override CFLAGS += -Werror -Wall
+override CFLAGS += -fPIC
+override CFLAGS += $(INCLUDES)
+override CFGLAS += -Wl,-L.
+override CFGLAS += -Wl,-lthermal
+
+all:
+
+export srctree OUTPUT CC LD CFLAGS V
+export DESTDIR DESTDIR_SQ
+
+include $(srctree)/tools/build/Makefile.include
+
+PATCHLEVEL    = $(LIBTHERMAL_TOOLS_PATCHLEVEL)
+EXTRAVERSION  = $(LIBTHERMAL_TOOLS_EXTRAVERSION)
+VERSION       = $(LIBTHERMAL_TOOLS_VERSION).$(LIBTHERMAL_TOOLS_PATCHLEVEL).$(LIBTHERMAL_TOOLS_EXTRAVERSION)
+
+LIBTHERMAL_TOOLS_SO := $(OUTPUT)libthermal_tools.so.$(VERSION)
+LIBTHERMAL_TOOLS_A  := $(OUTPUT)libthermal_tools.a
+LIBTHERMAL_TOOLS_IN := $(OUTPUT)libthermal_tools-in.o
+LIBTHERMAL_TOOLS_PC := $(OUTPUT)libthermal_tools.pc
+
+LIBTHERMAL_TOOLS_ALL := $(LIBTHERMAL_TOOLS_A) $(OUTPUT)libthermal_tools.so*
+
+$(LIBTHERMAL_TOOLS_IN): FORCE
+	$(Q)$(MAKE) $(build)=libthermal_tools
+
+$(LIBTHERMAL_TOOLS_A): $(LIBTHERMAL_TOOLS_IN)
+	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIBTHERMAL_TOOLS_IN)
+
+$(LIBTHERMAL_TOOLS_SO): $(LIBTHERMAL_TOOLS_IN)
+	$(QUIET_LINK)$(CC) --shared -Wl,-soname,libthermal_tools.so $^ -o $@
+	@ln -sf $(@F) $(OUTPUT)libthermal_tools.so
+	@ln -sf $(@F) $(OUTPUT)libthermal_tools.so.$(LIBTHERMAL_TOOLS_VERSION)
+
+
+libs: $(LIBTHERMAL_TOOLS_A) $(LIBTHERMAL_TOOLS_SO) $(LIBTHERMAL_TOOLS_PC)
+
+all: fixdep
+	$(Q)$(MAKE) libs
+
+clean:
+	$(call QUIET_CLEAN, libthermal_tools) $(RM) $(LIBTHERMAL_TOOLS_A) \
+                *.o *~ *.a *.so *.so.$(VERSION) *.so.$(LIBTHERMAL_TOOLS_VERSION) .*.d .*.cmd LIBTHERMAL_TOOLS-CFLAGS $(LIBTHERMAL_TOOLS_PC)
+
+$(LIBTHERMAL_TOOLS_PC):
+	$(QUIET_GEN)sed -e "s|@PREFIX@|$(prefix)|" \
+		-e "s|@LIBDIR@|$(libdir_SQ)|" \
+		-e "s|@VERSION@|$(VERSION)|" \
+		< libthermal_tools.pc.template > $@
+
+define do_install_mkdir
+	if [ ! -d '$(DESTDIR_SQ)$1' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$1'; \
+	fi
+endef
+
+define do_install
+	if [ ! -d '$(DESTDIR_SQ)$2' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \
+	fi;                                             \
+	$(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2'
+endef
+
+install_lib: libs
+	$(call QUIET_INSTALL, $(LIBTHERMAL_TOOLS_ALL)) \
+		$(call do_install_mkdir,$(libdir_SQ)); \
+		cp -fpR $(LIBTHERMAL_TOOLS_ALL) $(DESTDIR)$(libdir_SQ)
+
+install_headers:
+	$(call QUIET_INSTALL, headers) \
+		$(call do_install,include/thermal.h,$(prefix)/include/thermal,644); \
+
+install_pkgconfig: $(LIBTHERMAL_TOOLS_PC)
+	$(call QUIET_INSTALL, $(LIBTHERMAL_TOOLS_PC)) \
+		$(call do_install,$(LIBTHERMAL_TOOLS_PC),$(libdir_SQ)/pkgconfig,644)
+
+install_doc:
+	$(Q)$(MAKE) -C Documentation install-man install-html install-examples
+
+#install: install_lib install_headers install_pkgconfig install_doc
+install: install_lib install_headers install_pkgconfig
+
+FORCE:
+
+.PHONY: all install clean FORCE
--- a/tools/thermal/lib/libthermal_tools.pc.template
+++ b/tools/thermal/lib/libthermal_tools.pc.template
@ -0,0 +1,12 @@
+# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+
+prefix=@PREFIX@
+libdir=@LIBDIR@
+includedir=${prefix}/include
+
+Name: libthermal
+Description: thermal library
+Requires: libnl-3.0 libnl-genl-3.0
+Version: @VERSION@
+Libs: -L${libdir} -lnl-genl-3 -lnl-3
+Cflags: -I${includedir} -I{include}/libnl3
--- a/tools/thermal/lib/log.c
+++ b/tools/thermal/lib/log.c
@ -0,0 +1,77 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#include <stdarg.h>
+#include <stdio.h>
+#include <string.h>
+#include <syslog.h>
+#include "log.h"
+
+static const char *__ident = "unknown";
+static int __options;
+
+static const char * const loglvl[] = {
+	[LOG_DEBUG]	= "DEBUG",
+	[LOG_INFO]	= "INFO",
+	[LOG_NOTICE]	= "NOTICE",
+	[LOG_WARNING]	= "WARN",
+	[LOG_ERR]	= "ERROR",
+	[LOG_CRIT]	= "CRITICAL",
+	[LOG_ALERT]	= "ALERT",
+	[LOG_EMERG]	= "EMERG",
+};
+
+int log_str2level(const char *lvl)
+{
+	int i;
+
+	for (i = 0; i < sizeof(loglvl) / sizeof(loglvl[LOG_DEBUG]); i++)
+		if (!strcmp(lvl, loglvl[i]))
+			return i;
+
+	return LOG_DEBUG;
+}
+
+extern void logit(int level, const char *format, ...)
+{
+	va_list args;
+
+	va_start(args, format);
+
+	if (__options & TO_SYSLOG)
+		vsyslog(level, format, args);
+
+	if (__options & TO_STDERR)
+		vfprintf(stderr, format, args);
+
+	if (__options & TO_STDOUT)
+		vfprintf(stdout, format, args);
+
+	va_end(args);
+}
+
+int log_init(int level, const char *ident, int options)
+{
+	if (!options)
+		return -1;
+
+	if (level > LOG_DEBUG)
+		return -1;
+
+	if (!ident)
+		return -1;
+
+	__ident = ident;
+	__options = options;
+
+	if (options & TO_SYSLOG) {
+		openlog(__ident, options | LOG_NDELAY, LOG_USER);
+		setlogmask(LOG_UPTO(level));
+	}
+
+	return 0;
+}
+
+void log_exit(void)
+{
+	closelog();
+}
--- a/tools/thermal/lib/log.h
+++ b/tools/thermal/lib/log.h
@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: LGPL-2.1+ */
+/* Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org> */
+#ifndef __THERMAL_TOOLS_LOG_H
+#define __THERMAL_TOOLS_LOG_H
+
+#include <syslog.h>
+
+#ifndef __maybe_unused
+#define __maybe_unused		__attribute__((__unused__))
+#endif
+
+#define TO_SYSLOG 0x1
+#define TO_STDOUT 0x2
+#define TO_STDERR 0x4
+
+extern void logit(int level, const char *format, ...);
+
+#define DEBUG(fmt, ...)		logit(LOG_DEBUG, "%s:%d: " fmt, __func__, __LINE__, ##__VA_ARGS__)
+#define INFO(fmt, ...)		logit(LOG_INFO, fmt, ##__VA_ARGS__)
+#define NOTICE(fmt, ...)	logit(LOG_NOTICE, fmt, ##__VA_ARGS__)
+#define WARN(fmt, ...)		logit(LOG_WARNING, fmt, ##__VA_ARGS__)
+#define ERROR(fmt, ...)		logit(LOG_ERR, fmt, ##__VA_ARGS__)
+#define CRITICAL(fmt, ...)	logit(LOG_CRIT, fmt, ##__VA_ARGS__)
+#define ALERT(fmt, ...)		logit(LOG_ALERT, fmt, ##__VA_ARGS__)
+#define EMERG(fmt, ...)		logit(LOG_EMERG, fmt, ##__VA_ARGS__)
+
+int log_init(int level, const char *ident, int options);
+int log_str2level(const char *lvl);
+void log_exit(void);
+
+#endif
--- a/tools/thermal/lib/mainloop.c
+++ b/tools/thermal/lib/mainloop.c
@ -0,0 +1,120 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#include <stdlib.h>
+#include <errno.h>
+#include <unistd.h>
+#include <signal.h>
+#include <sys/epoll.h>
+#include "mainloop.h"
+#include "log.h"
+
+static int epfd = -1;
+static unsigned short nrhandler;
+static sig_atomic_t exit_mainloop;
+
+struct mainloop_data {
+	mainloop_callback_t cb;
+	void *data;
+	int fd;
+};
+
+static struct mainloop_data **mds;
+
+#define MAX_EVENTS 10
+
+int mainloop(unsigned int timeout)
+{
+	int i, nfds;
+	struct epoll_event events[MAX_EVENTS];
+	struct mainloop_data *md;
+
+	if (epfd < 0)
+		return -1;
+
+	for (;;) {
+
+		nfds = epoll_wait(epfd, events, MAX_EVENTS, timeout);
+
+		if (exit_mainloop || !nfds)
+			return 0;
+
+		if (nfds < 0) {
+			if (errno == EINTR)
+				continue;
+			return -1;
+		}
+
+		for (i = 0; i < nfds; i++) {
+			md = events[i].data.ptr;
+
+			if (md->cb(md->fd, md->data) > 0)
+				return 0;
+		}
+	}
+}
+
+int mainloop_add(int fd, mainloop_callback_t cb, void *data)
+{
+	struct epoll_event ev = {
+		.events = EPOLLIN,
+	};
+
+	struct mainloop_data *md;
+
+	if (fd >= nrhandler) {
+		mds = realloc(mds, sizeof(*mds) * (fd + 1));
+		if (!mds)
+			return -1;
+		nrhandler = fd + 1;
+	}
+
+	md = malloc(sizeof(*md));
+	if (!md)
+		return -1;
+
+	md->data = data;
+	md->cb = cb;
+	md->fd = fd;
+
+	mds[fd] = md;
+	ev.data.ptr = md;
+
+	if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd, &ev) < 0) {
+		free(md);
+		return -1;
+	}
+
+	return 0;
+}
+
+int mainloop_del(int fd)
+{
+	if (fd >= nrhandler)
+		return -1;
+
+	if (epoll_ctl(epfd, EPOLL_CTL_DEL, fd, NULL) < 0)
+		return -1;
+
+	free(mds[fd]);
+
+	return 0;
+}
+
+int mainloop_init(void)
+{
+	epfd = epoll_create(2);
+	if (epfd < 0)
+		return -1;
+
+	return 0;
+}
+
+void mainloop_exit(void)
+{
+	exit_mainloop = 1;
+}
+
+void mainloop_fini(void)
+{
+	close(epfd);
+}
--- a/tools/thermal/lib/mainloop.h
+++ b/tools/thermal/lib/mainloop.h
@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: LGPL-2.1+ */
+/* Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org> */
+#ifndef __THERMAL_TOOLS_MAINLOOP_H
+#define __THERMAL_TOOLS_MAINLOOP_H
+
+typedef int (*mainloop_callback_t)(int fd, void *data);
+
+extern int mainloop(unsigned int timeout);
+extern int mainloop_add(int fd, mainloop_callback_t cb, void *data);
+extern int mainloop_del(int fd);
+extern void mainloop_exit(void);
+extern int mainloop_init(void);
+extern void mainloop_fini(void);
+
+#endif
--- a/tools/thermal/lib/thermal-tools.h
+++ b/tools/thermal/lib/thermal-tools.h
@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: LGPL-2.1+ */
+/* Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org> */
+#ifndef __THERMAL_TOOLS
+#define __THERMAL_TOOLS
+
+#include "log.h"
+#include "mainloop.h"
+#include "uptimeofday.h"
+
+#endif
--- a/tools/thermal/lib/uptimeofday.c
+++ b/tools/thermal/lib/uptimeofday.c
@ -0,0 +1,40 @@
+// SPDX-License-Identifier: LGPL-2.1+
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#include <stdio.h>
+#include <sys/time.h>
+#include <linux/sysinfo.h>
+#include "thermal-tools.h"
+
+static unsigned long __offset;
+static struct timeval __tv;
+
+int uptimeofday_init(void)
+{
+	struct sysinfo info;
+
+	if (sysinfo(&info))
+		return -1;
+
+	gettimeofday(&__tv, NULL);
+
+	__offset = __tv.tv_sec - info.uptime;
+
+	return 0;
+}
+
+unsigned long getuptimeofday_ms(void)
+{
+	gettimeofday(&__tv, NULL);
+
+	return ((__tv.tv_sec - __offset) * 1000) + (__tv.tv_usec / 1000);
+}
+
+struct timespec msec_to_timespec(int msec)
+{
+	struct timespec tv = {
+		.tv_sec = (msec / 1000),
+		.tv_nsec = (msec % 1000) * 1000000,
+	};
+
+	return tv;
+}
--- a/tools/thermal/lib/uptimeofday.h
+++ b/tools/thermal/lib/uptimeofday.h
@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: LGPL-2.1+ */
+/* Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org> */
+#ifndef __THERMAL_TOOLS_UPTIMEOFDAY_H
+#define __THERMAL_TOOLS_UPTIMEOFDAY_H
+#include <sys/sysinfo.h>
+#include <sys/time.h>
+
+int uptimeofday_init(void);
+unsigned long getuptimeofday_ms(void);
+struct timespec msec_to_timespec(int msec);
+
+#endif
--- a/tools/thermal/thermal-engine/Build
+++ b/tools/thermal/thermal-engine/Build
@ -0,0 +1 @@
+thermal-engine-y += thermal-engine.o
--- a/tools/thermal/thermal-engine/Makefile
+++ b/tools/thermal/thermal-engine/Makefile
@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for thermal tools
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+# $(info Determined 'srctree' to be $(srctree))
+endif
+
+CFLAGS = -Wall -Wextra
+CFLAGS += -I$(srctree)/tools/thermal/lib
+CFLAGS += -I$(srctree)/tools/lib/thermal/include
+
+LDFLAGS = -L$(srctree)/tools/thermal/lib
+LDFLAGS += -L$(srctree)/tools/lib/thermal
+LDFLAGS += -lthermal_tools
+LDFLAGS += -lthermal
+LDFLAGS += -lconfig
+LDFLAGS += -lnl-genl-3 -lnl-3
+
+VERSION = 0.0.1
+
+all: thermal-engine
+%: %.c
+	$(CC) $(CFLAGS) -D VERSION=\"$(VERSION)\" -o $@ $^ $(LDFLAGS)
+clean:
+	$(RM) thermal-engine
--- a/tools/thermal/thermal-engine/thermal-engine.c
+++ b/tools/thermal/thermal-engine/thermal-engine.c
@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Thermal monitoring tool based on the thermal netlink events.
+ *
+ * Copyright (C) 2022 Linaro Ltd.
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@kernel.org>
+ */
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <syslog.h>
+
+#include <sys/epoll.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+
+#include <thermal.h>
+#include "thermal-tools.h"
+
+struct options {
+	int loglevel;
+	int logopt;
+	int interactive;
+	int daemonize;
+};
+
+struct thermal_data {
+	struct thermal_zone *tz;
+	struct thermal_handler *th;
+};
+
+static int show_trip(struct thermal_trip *tt, __maybe_unused void *arg)
+{
+	INFO("trip id=%d, type=%d, temp=%d, hyst=%d\n",
+	     tt->id, tt->type, tt->temp, tt->hyst);
+
+	return 0;
+}
+
+static int show_temp(struct thermal_zone *tz, __maybe_unused void *arg)
+{
+	thermal_cmd_get_temp(arg, tz);
+
+	INFO("temperature: %d\n", tz->temp);
+
+	return 0;
+}
+
+static int show_governor(struct thermal_zone *tz, __maybe_unused void *arg)
+{
+	thermal_cmd_get_governor(arg, tz);
+
+	INFO("governor: '%s'\n", tz->governor);
+
+	return 0;
+}
+
+static int show_tz(struct thermal_zone *tz, __maybe_unused void *arg)
+{
+	INFO("thermal zone '%s', id=%d\n", tz->name, tz->id);
+
+	for_each_thermal_trip(tz->trip, show_trip, NULL);
+
+	show_temp(tz, arg);
+
+	show_governor(tz, arg);
+
+	return 0;
+}
+
+static int tz_create(const char *name, int tz_id, __maybe_unused void *arg)
+{
+	INFO("Thermal zone '%s'/%d created\n", name, tz_id);
+
+	return 0;
+}
+
+static int tz_delete(int tz_id, __maybe_unused void *arg)
+{
+	INFO("Thermal zone %d deleted\n", tz_id);
+
+	return 0;
+}
+
+static int tz_disable(int tz_id, void *arg)
+{
+	struct thermal_data *td = arg;
+	struct thermal_zone *tz = thermal_zone_find_by_id(td->tz, tz_id);
+
+	INFO("Thermal zone %d ('%s') disabled\n", tz_id, tz->name);
+
+	return 0;
+}
+
+static int tz_enable(int tz_id, void *arg)
+{
+	struct thermal_data *td = arg;
+	struct thermal_zone *tz = thermal_zone_find_by_id(td->tz, tz_id);
+
+	INFO("Thermal zone %d ('%s') enabled\n", tz_id, tz->name);
+
+	return 0;
+}
+
+static int trip_high(int tz_id, int trip_id, int temp, void *arg)
+{
+	struct thermal_data *td = arg;
+	struct thermal_zone *tz = thermal_zone_find_by_id(td->tz, tz_id);
+
+	INFO("Thermal zone %d ('%s'): trip point %d crossed way up with %d °C\n",
+	     tz_id, tz->name, trip_id, temp);
+
+	return 0;
+}
+
+static int trip_low(int tz_id, int trip_id, int temp, void *arg)
+{
+	struct thermal_data *td = arg;
+	struct thermal_zone *tz = thermal_zone_find_by_id(td->tz, tz_id);
+
+	INFO("Thermal zone %d ('%s'): trip point %d crossed way down with %d °C\n",
+	     tz_id, tz->name, trip_id, temp);
+
+	return 0;
+}
+
+static int trip_add(int tz_id, int trip_id, int type, int temp, int hyst, __maybe_unused void *arg)
+{
+	INFO("Trip point added %d: id=%d, type=%d, temp=%d, hyst=%d\n",
+	     tz_id, trip_id, type, temp, hyst);
+
+	return 0;
+}
+
+static int trip_delete(int tz_id, int trip_id, __maybe_unused void *arg)
+{
+	INFO("Trip point deleted %d: id=%d\n", tz_id, trip_id);
+
+	return 0;
+}
+
+static int trip_change(int tz_id, int trip_id, int type, int temp,
+		       int hyst, __maybe_unused void *arg)
+{
+	struct thermal_data *td = arg;
+	struct thermal_zone *tz = thermal_zone_find_by_id(td->tz, tz_id);
+
+	INFO("Trip point changed %d: id=%d, type=%d, temp=%d, hyst=%d\n",
+	     tz_id, trip_id, type, temp, hyst);
+
+	tz->trip[trip_id].type = type;
+	tz->trip[trip_id].temp = temp;
+	tz->trip[trip_id].hyst = hyst;
+
+	return 0;
+}
+
+static int cdev_add(const char *name, int cdev_id, int max_state, __maybe_unused void *arg)
+{
+	INFO("Cooling device '%s'/%d (max state=%d) added\n", name, cdev_id, max_state);
+
+	return 0;
+}
+
+static int cdev_delete(int cdev_id, __maybe_unused void *arg)
+{
+	INFO("Cooling device %d deleted", cdev_id);
+
+	return 0;
+}
+
+static int cdev_update(int cdev_id, int cur_state, __maybe_unused void *arg)
+{
+	INFO("cdev:%d state:%d\n", cdev_id, cur_state);
+
+	return 0;
+}
+
+static int gov_change(int tz_id, const char *name, __maybe_unused void *arg)
+{
+	struct thermal_data *td = arg;
+	struct thermal_zone *tz = thermal_zone_find_by_id(td->tz, tz_id);
+
+	INFO("%s: governor changed %s -> %s\n", tz->name, tz->governor, name);
+
+	strcpy(tz->governor, name);
+
+	return 0;
+}
+
+static struct thermal_ops ops = {
+	.events.tz_create	= tz_create,
+	.events.tz_delete	= tz_delete,
+	.events.tz_disable	= tz_disable,
+	.events.tz_enable	= tz_enable,
+	.events.trip_high	= trip_high,
+	.events.trip_low	= trip_low,
+	.events.trip_add	= trip_add,
+	.events.trip_delete	= trip_delete,
+	.events.trip_change	= trip_change,
+	.events.cdev_add	= cdev_add,
+	.events.cdev_delete	= cdev_delete,
+	.events.cdev_update	= cdev_update,
+	.events.gov_change	= gov_change
+};
+
+static int thermal_event(__maybe_unused int fd, __maybe_unused void *arg)
+{
+	struct thermal_data *td = arg;
+
+	return thermal_events_handle(td->th, td);
+}
+
+static void usage(const char *cmd)
+{
+	printf("%s : A thermal monitoring engine based on notifications\n", cmd);
+	printf("Usage: %s [options]\n", cmd);
+	printf("\t-h, --help\t\tthis help\n");
+	printf("\t-d, --daemonize\n");
+	printf("\t-l <level>, --loglevel <level>\tlog level: ");
+	printf("DEBUG, INFO, NOTICE, WARN, ERROR\n");
+	printf("\t-s, --syslog\t\toutput to syslog\n");
+	printf("\n");
+	exit(0);
+}
+
+static int options_init(int argc, char *argv[], struct options *options)
+{
+	int opt;
+
+	struct option long_options[] = {
+		{ "help",	no_argument, NULL, 'h' },
+		{ "daemonize",	no_argument, NULL, 'd' },
+		{ "syslog",	no_argument, NULL, 's' },
+		{ "loglevel",	required_argument, NULL, 'l' },
+		{ 0, 0, 0, 0 }
+	};
+
+	while (1) {
+
+		int optindex = 0;
+
+		opt = getopt_long(argc, argv, "l:dhs", long_options, &optindex);
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'l':
+			options->loglevel = log_str2level(optarg);
+			break;
+		case 'd':
+			options->daemonize = 1;
+			break;
+		case 's':
+			options->logopt = TO_SYSLOG;
+			break;
+		case 'h':
+			usage(basename(argv[0]));
+			break;
+		default: /* '?' */
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+enum {
+	THERMAL_ENGINE_SUCCESS = 0,
+	THERMAL_ENGINE_OPTION_ERROR,
+	THERMAL_ENGINE_DAEMON_ERROR,
+	THERMAL_ENGINE_LOG_ERROR,
+	THERMAL_ENGINE_THERMAL_ERROR,
+	THERMAL_ENGINE_MAINLOOP_ERROR,
+};
+
+int main(int argc, char *argv[])
+{
+	struct thermal_data td;
+	struct options options = {
+		.loglevel = LOG_INFO,
+		.logopt = TO_STDOUT,
+	};
+
+	if (options_init(argc, argv, &options)) {
+		ERROR("Usage: %s --help\n", argv[0]);
+		return THERMAL_ENGINE_OPTION_ERROR;
+	}
+
+	if (options.daemonize && daemon(0, 0)) {
+		ERROR("Failed to daemonize: %p\n");
+		return THERMAL_ENGINE_DAEMON_ERROR;
+	}
+
+	if (log_init(options.loglevel, basename(argv[0]), options.logopt)) {
+		ERROR("Failed to initialize logging facility\n");
+		return THERMAL_ENGINE_LOG_ERROR;
+	}
+
+	td.th = thermal_init(&ops);
+	if (!td.th) {
+		ERROR("Failed to initialize the thermal library\n");
+		return THERMAL_ENGINE_THERMAL_ERROR;
+	}
+
+	td.tz = thermal_zone_discover(td.th);
+	if (!td.tz) {
+		ERROR("No thermal zone available\n");
+		return THERMAL_ENGINE_THERMAL_ERROR;
+	}
+
+	for_each_thermal_zone(td.tz, show_tz, td.th);
+
+	if (mainloop_init()) {
+		ERROR("Failed to initialize the mainloop\n");
+		return THERMAL_ENGINE_MAINLOOP_ERROR;
+	}
+
+	if (mainloop_add(thermal_events_fd(td.th), thermal_event, &td)) {
+		ERROR("Failed to setup the mainloop\n");
+		return THERMAL_ENGINE_MAINLOOP_ERROR;
+	}
+
+	INFO("Waiting for thermal events ...\n");
+
+	if (mainloop(-1)) {
+		ERROR("Mainloop failed\n");
+		return THERMAL_ENGINE_MAINLOOP_ERROR;
+	}
+
+	return THERMAL_ENGINE_SUCCESS;
+}
--- a/tools/thermal/thermometer/Build
+++ b/tools/thermal/thermometer/Build
@ -0,0 +1 @@
+thermometer-y += thermometer.o
--- a/tools/thermal/thermometer/Makefile
+++ b/tools/thermal/thermometer/Makefile
@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for cgroup tools
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+# $(info Determined 'srctree' to be $(srctree))
+endif
+
+CFLAGS = -Wall -Wextra
+CFLAGS += -I$(srctree)/tools/thermal/lib
+
+LDFLAGS = -L$(srctree)/tools/thermal/lib
+LDFLAGS += -lthermal_tools
+LDFLAGS += -lconfig
+
+VERSION = 0.0.1
+TARGET=thermometer
+
+all: $(TARGET)
+%: %.c
+	$(CC) $(CFLAGS) -D VERSION=\"$(VERSION)\" -o $@ $^ $(LDFLAGS)
+
+clean:
+	$(RM) $(TARGET)
--- a/tools/thermal/thermometer/thermometer.8
+++ b/tools/thermal/thermometer/thermometer.8
@ -0,0 +1,92 @@
+.TH THERMOMETER 8
+# SPDX-License-Identifier: GPL-2.0
+.SH NAME
+\fBthermometer\fP - A thermal profiling tool
+
+.SH SYNOPSIS
+.ft B
+.B thermometer
+.RB [ options ]
+.RB [ command ]
+.br
+.SH DESCRIPTION
+\fBthermometer \fP captures the thermal zones temperature at a
+specified sampling period. It is optimized to reduce as much as
+possible the overhead while doing the temperature acquisition in order
+to prevent disrupting the running application we may want to profile.
+
+This low overhead also allows a high rate sampling for the temperature
+which could be necessary to spot overshots and undershots.
+
+If no configuration file is specified, then all the thermal zones will
+be monitored at 4Hz, so every 250ms. A configuration file specifies
+the thermal zone names and the desired sampling period. A thermal zone
+name can be a regular expression to specify a group of thermal zone.
+
+The sampling of the different thermal zones will be written into
+separate files with the thermal zone name. It is possible to specify a
+postfix to identify them for example for a specific scenario. The
+output directory can be specified in addition.
+
+Without any parameters, \fBthermometer \fP captures all the thermal
+zone temperatures every 250ms and write to the current directory the
+captured files postfixed with the current date.
+
+If a running \fBduration\fP is specified or a \fBcommand\fP, the
+capture ends at the end of the duration if the command did not
+finished before. The \fBduration\fP can be specified alone as well as
+the \fBcommand\fP. If none is specified, the capture will continue
+indefinitively until interrupted by \fBSIGINT\fP or \fBSIGQUIT\fP.
+.PP
+
+.SS Options
+.PP
+The \fB-h, --help\fP option shows a short usage help
+.PP
+The \fB-o <dir>, --output <dir>\fP option defines the output directory to put the
+sampling files
+.PP
+The \fB-c <config>, --config <config>\fP option specifies the configuration file to use
+.PP
+The \fB-d <seconds>, --duration <seconds>\fP option specifies the duration of the capture
+.PP
+The \fB-l <loglevel>, --loglevel <loglevel>\fP option sets the loglevel [DEBUG,INFO,NOTICE,WARN,ERROR]
+.PP
+The \fB-p <string>, --postfix <string>\fP option appends \fBstring\fP at the end of the capture filenames
+.PP
+The \fB-s, --syslog\fP option sets the output to syslog, default is \fBstdout\fP
+.PP
+The \fB-w, --overwrite\fP overwrites the output files if they exist
+.PP
+
+.PP
+
+.SS "Exit status:"
+.TP
+0
+if OK,
+.TP
+1
+Error with the options specified as parameters
+.TP
+2
+Error when configuring the logging facility
+.TP
+3
+Error when configuring the time
+.TP
+4
+Error in the initialization routine
+.TP
+5
+Error during the runtime
+
+.SH Capture file format
+
+Every file contains two columns. The first one is the uptime timestamp
+in order to find a point in time since the system started up if there
+is any thermal event. The second one is the temperature in milli
+degree. The first line contains the label of each column.
+
+.SH AUTHOR
+Daniel Lezcano <daniel.lezcano@kernel.org>
--- a/tools/thermal/thermometer/thermometer.c
+++ b/tools/thermal/thermometer/thermometer.c
@ -0,0 +1,572 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2022, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
+#define _GNU_SOURCE
+#include <dirent.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <regex.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/signalfd.h>
+#include <sys/timerfd.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <time.h>
+#include <unistd.h>
+#include <linux/thermal.h>
+
+#include <libconfig.h>
+#include "thermal-tools.h"
+
+#define CLASS_THERMAL "/sys/class/thermal"
+
+enum {
+	THERMOMETER_SUCCESS = 0,
+	THERMOMETER_OPTION_ERROR,
+	THERMOMETER_LOG_ERROR,
+	THERMOMETER_CONFIG_ERROR,
+	THERMOMETER_TIME_ERROR,
+	THERMOMETER_INIT_ERROR,
+	THERMOMETER_RUNTIME_ERROR
+};
+
+struct options {
+	int loglvl;
+	int logopt;
+	int overwrite;
+	int duration;
+	const char *config;
+	char postfix[PATH_MAX];
+	char output[PATH_MAX];
+};
+
+struct tz_regex {
+	regex_t regex;
+	int polling;
+};
+
+struct configuration {
+	struct tz_regex *tz_regex;
+	int nr_tz_regex;
+
+};
+
+struct tz {
+	FILE *file_out;
+	int fd_temp;
+	int fd_timer;
+	int polling;
+	const char *name;
+};
+
+struct thermometer {
+	struct tz *tz;
+	int nr_tz;
+};
+
+static struct tz_regex *configuration_tz_match(const char *expr,
+					       struct configuration *config)
+{
+	int i;
+
+	for (i = 0; i < config->nr_tz_regex; i++) {
+
+		if (!regexec(&config->tz_regex[i].regex, expr, 0, NULL, 0))
+			return &config->tz_regex[i];
+	}
+
+	return NULL;
+}
+
+static int configuration_default_init(struct configuration *config)
+{
+	config->tz_regex = realloc(config->tz_regex, sizeof(*config->tz_regex) *
+				   (config->nr_tz_regex + 1));
+
+	if (regcomp(&config->tz_regex[config->nr_tz_regex].regex, ".*",
+		    REG_NOSUB | REG_EXTENDED)) {
+		ERROR("Invalid regular expression\n");
+		return -1;
+	}
+
+	config->tz_regex[config->nr_tz_regex].polling = 250;
+	config->nr_tz_regex = 1;
+
+	return 0;
+}
+
+static int configuration_init(const char *path, struct configuration *config)
+{
+	config_t cfg;
+
+	config_setting_t *tz;
+	int i, length;
+
+	if (path && access(path, F_OK)) {
+		ERROR("'%s' is not accessible\n", path);
+		return -1;
+	}
+
+	if (!path && !config->nr_tz_regex) {
+		INFO("No thermal zones configured, using wildcard for all of them\n");
+		return configuration_default_init(config);
+	}
+
+	config_init(&cfg);
+
+	if (!config_read_file(&cfg, path)) {
+		ERROR("Failed to parse %s:%d - %s\n", config_error_file(&cfg),
+		      config_error_line(&cfg), config_error_text(&cfg));
+
+		return -1;
+	}
+
+	tz = config_lookup(&cfg, "thermal-zones");
+	if (!tz) {
+		ERROR("No thermal zone configured to be monitored\n");
+		return -1;
+	}
+
+	length = config_setting_length(tz);
+
+	INFO("Found %d thermal zone(s) regular expression\n", length);
+
+	for (i = 0; i < length; i++) {
+
+		config_setting_t *node;
+		const char *name;
+		int polling;
+
+		node = config_setting_get_elem(tz, i);
+		if (!node) {
+			ERROR("Missing node name '%d'\n", i);
+			return -1;
+		}
+
+		if (!config_setting_lookup_string(node, "name", &name)) {
+			ERROR("Thermal zone name not found\n");
+			return -1;
+		}
+
+		if (!config_setting_lookup_int(node, "polling", &polling)) {
+			ERROR("Polling value not found");
+			return -1;
+		}
+
+		config->tz_regex = realloc(config->tz_regex, sizeof(*config->tz_regex) *
+					(config->nr_tz_regex + 1));
+
+		if (regcomp(&config->tz_regex[config->nr_tz_regex].regex, name,
+			    REG_NOSUB | REG_EXTENDED)) {
+			ERROR("Invalid regular expression '%s'\n", name);
+			continue;
+		}
+
+		config->tz_regex[config->nr_tz_regex].polling = polling;
+		config->nr_tz_regex++;
+
+		INFO("Thermal zone regular expression '%s' with polling %d\n",
+		     name, polling);
+	}
+
+	return 0;
+}
+
+static void usage(const char *cmd)
+{
+	printf("%s Version: %s\n", cmd, VERSION);
+	printf("Usage: %s [options]\n", cmd);
+	printf("\t-h, --help\t\tthis help\n");
+	printf("\t-o, --output <dir>\toutput directory for temperature capture\n");
+	printf("\t-c, --config <file>\tconfiguration file\n");
+	printf("\t-d, --duration <seconds>\tcapture duration\n");
+	printf("\t-l, --loglevel <level>\tlog level: ");
+	printf("DEBUG, INFO, NOTICE, WARN, ERROR\n");
+	printf("\t-p, --postfix <string>\tpostfix to be happened at the end of the files\n");
+	printf("\t-s, --syslog\t\toutput to syslog\n");
+	printf("\t-w, --overwrite\t\toverwrite the temperature capture files if they exist\n");
+	printf("\n");
+	exit(0);
+}
+
+static int options_init(int argc, char *argv[], struct options *options)
+{
+	int opt;
+	time_t now = time(NULL);
+
+	struct option long_options[] = {
+		{ "help",	no_argument, NULL, 'h' },
+		{ "config",	required_argument, NULL, 'c' },
+		{ "duration",	required_argument, NULL, 'd' },
+		{ "loglevel",	required_argument, NULL, 'l' },
+		{ "postfix",	required_argument, NULL, 'p' },
+		{ "output",	required_argument, NULL, 'o' },
+		{ "syslog",	required_argument, NULL, 's' },
+		{ "overwrite",	no_argument, NULL, 'w' },
+		{ 0, 0, 0, 0 }
+	};
+
+	strftime(options->postfix, sizeof(options->postfix),
+		 "-%Y-%m-%d_%H:%M:%S", gmtime(&now));
+
+	while (1) {
+
+		int optindex = 0;
+
+		opt = getopt_long(argc, argv, "ho:c:d:l:p:sw", long_options, &optindex);
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'c':
+			options->config = optarg;
+			break;
+		case 'd':
+			options->duration = atoi(optarg) * 1000;
+			break;
+		case 'l':
+			options->loglvl = log_str2level(optarg);
+			break;
+		case 'h':
+			usage(basename(argv[0]));
+			break;
+		case 'p':
+			strcpy(options->postfix, optarg);
+			break;
+		case 'o':
+			strcpy(options->output, optarg);
+			break;
+		case 's':
+			options->logopt = TO_SYSLOG;
+			break;
+		case 'w':
+			options->overwrite = 1;
+			break;
+		default: /* '?' */
+			ERROR("Usage: %s --help\n", argv[0]);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int thermometer_add_tz(const char *path, const char *name, int polling,
+			      struct thermometer *thermometer)
+{
+	int fd;
+	char tz_path[PATH_MAX];
+
+	sprintf(tz_path, CLASS_THERMAL"/%s/temp", path);
+
+	fd = open(tz_path, O_RDONLY);
+	if (fd < 0) {
+		ERROR("Failed to open '%s': %m\n", tz_path);
+		return -1;
+	}
+
+	thermometer->tz = realloc(thermometer->tz,
+				  sizeof(*thermometer->tz) * (thermometer->nr_tz + 1));
+	if (!thermometer->tz) {
+		ERROR("Failed to allocate thermometer->tz\n");
+		return -1;
+	}
+
+	thermometer->tz[thermometer->nr_tz].fd_temp = fd;
+	thermometer->tz[thermometer->nr_tz].name = strdup(name);
+	thermometer->tz[thermometer->nr_tz].polling = polling;
+	thermometer->nr_tz++;
+
+	INFO("Added thermal zone '%s->%s (polling:%d)'\n", path, name, polling);
+
+	return 0;
+}
+
+static int thermometer_init(struct configuration *config,
+			    struct thermometer *thermometer)
+{
+	DIR *dir;
+	struct dirent *dirent;
+	struct tz_regex *tz_regex;
+	const char *tz_dirname = "thermal_zone";
+
+	if (mainloop_init()) {
+		ERROR("Failed to start mainloop\n");
+		return -1;
+	}
+
+	dir = opendir(CLASS_THERMAL);
+	if (!dir) {
+		ERROR("failed to open '%s'\n", CLASS_THERMAL);
+		return -1;
+	}
+
+	while ((dirent = readdir(dir))) {
+		char tz_type[THERMAL_NAME_LENGTH];
+		char tz_path[PATH_MAX];
+		FILE *tz_file;
+
+		if (strncmp(dirent->d_name, tz_dirname, strlen(tz_dirname)))
+			continue;
+
+		sprintf(tz_path, CLASS_THERMAL"/%s/type", dirent->d_name);
+
+		tz_file = fopen(tz_path, "r");
+		if (!tz_file) {
+			ERROR("Failed to open '%s': %m", tz_path);
+			continue;
+		}
+
+		fscanf(tz_file, "%s", tz_type);
+
+		fclose(tz_file);
+
+		tz_regex = configuration_tz_match(tz_type, config);
+		if (!tz_regex)
+			continue;
+
+		if (thermometer_add_tz(dirent->d_name, tz_type,
+				       tz_regex->polling, thermometer))
+			continue;
+	}
+
+	closedir(dir);
+
+	return 0;
+}
+
+static int timer_temperature_callback(int fd, void *arg)
+{
+	struct tz *tz = arg;
+	char buf[16] = { 0 };
+
+	pread(tz->fd_temp, buf, sizeof(buf), 0);
+
+	fprintf(tz->file_out, "%ld %s", getuptimeofday_ms(), buf);
+
+	read(fd, buf, sizeof(buf));
+
+	return 0;
+}
+
+static int thermometer_start(struct thermometer *thermometer,
+			     struct options *options)
+{
+	struct itimerspec timer_it = { 0 };
+	char *path;
+	FILE *f;
+	int i;
+
+	INFO("Capturing %d thermal zone(s) temperature...\n", thermometer->nr_tz);
+
+	if (access(options->output, F_OK) && mkdir(options->output, 0700)) {
+		ERROR("Failed to create directory '%s'\n", options->output);
+		return -1;
+	}
+
+	for (i = 0; i < thermometer->nr_tz; i++) {
+
+		asprintf(&path, "%s/%s%s", options->output,
+			 thermometer->tz[i].name, options->postfix);
+
+		if (!options->overwrite && !access(path, F_OK)) {
+			ERROR("'%s' already exists\n", path);
+			return -1;
+		}
+
+		f = fopen(path, "w");
+		if (!f) {
+			ERROR("Failed to create '%s':%m\n", path);
+			return -1;
+		}
+
+		fprintf(f, "timestamp(ms) %s(°mC)\n", thermometer->tz[i].name);
+
+		thermometer->tz[i].file_out = f;
+
+		DEBUG("Created '%s' file for thermal zone '%s'\n", path, thermometer->tz[i].name);
+
+		/*
+		 * Create polling timer
+		 */
+		thermometer->tz[i].fd_timer = timerfd_create(CLOCK_MONOTONIC, 0);
+		if (thermometer->tz[i].fd_timer < 0) {
+			ERROR("Failed to create timer for '%s': %m\n",
+			      thermometer->tz[i].name);
+			return -1;
+		}
+
+		DEBUG("Watching '%s' every %d ms\n",
+		      thermometer->tz[i].name, thermometer->tz[i].polling);
+
+		timer_it.it_interval = timer_it.it_value =
+			msec_to_timespec(thermometer->tz[i].polling);
+
+		if (timerfd_settime(thermometer->tz[i].fd_timer, 0,
+				    &timer_it, NULL) < 0)
+			return -1;
+
+		if (mainloop_add(thermometer->tz[i].fd_timer,
+				 timer_temperature_callback,
+				 &thermometer->tz[i]))
+			return -1;
+	}
+
+	return 0;
+}
+
+static int thermometer_execute(int argc, char *argv[], char *const envp[], pid_t *pid)
+{
+	if (!argc)
+		return 0;
+
+	*pid = fork();
+	if (*pid < 0) {
+		ERROR("Failed to fork process: %m");
+		return -1;
+	}
+
+	if (!(*pid)) {
+		execvpe(argv[0], argv, envp);
+		exit(1);
+	}
+
+	return 0;
+}
+
+static int kill_process(__maybe_unused int fd, void *arg)
+{
+	pid_t pid = *(pid_t *)arg;
+
+	if (kill(pid, SIGTERM))
+		ERROR("Failed to send SIGTERM signal to '%d': %p\n", pid);
+	else if (waitpid(pid, NULL, 0))
+		ERROR("Failed to wait pid '%d': %p\n", pid);
+
+	mainloop_exit();
+
+	return 0;
+}
+
+static int exit_mainloop(__maybe_unused int fd, __maybe_unused void *arg)
+{
+	mainloop_exit();
+	return 0;
+}
+
+static int thermometer_wait(struct options *options, pid_t pid)
+{
+	int fd;
+	sigset_t mask;
+
+	/*
+	 * If there is a duration specified, we will exit the mainloop
+	 * and gracefully close all the files which will flush the
+	 * file system cache
+	 */
+	if (options->duration) {
+		struct itimerspec timer_it = { 0 };
+
+		timer_it.it_value = msec_to_timespec(options->duration);
+
+		fd = timerfd_create(CLOCK_MONOTONIC, 0);
+		if (fd < 0) {
+			ERROR("Failed to create duration timer: %m\n");
+			return -1;
+		}
+
+		if (timerfd_settime(fd, 0, &timer_it, NULL)) {
+			ERROR("Failed to set timer time: %m\n");
+			return -1;
+		}
+
+		if (mainloop_add(fd, pid < 0 ? exit_mainloop : kill_process, &pid)) {
+			ERROR("Failed to set timer exit mainloop callback\n");
+			return -1;
+		}
+	}
+
+	/*
+	 * We want to catch any keyboard interrupt, as well as child
+	 * signals if any in order to exit properly
+	 */
+	sigemptyset(&mask);
+	sigaddset(&mask, SIGINT);
+	sigaddset(&mask, SIGQUIT);
+	sigaddset(&mask, SIGCHLD);
+
+	if (sigprocmask(SIG_BLOCK, &mask, NULL)) {
+		ERROR("Failed to set sigprocmask: %m\n");
+		return -1;
+	}
+
+	fd = signalfd(-1, &mask, 0);
+	if (fd < 0) {
+		ERROR("Failed to set the signalfd: %m\n");
+		return -1;
+	}
+
+	if (mainloop_add(fd, exit_mainloop, NULL)) {
+		ERROR("Failed to set timer exit mainloop callback\n");
+		return -1;
+	}
+
+	return mainloop(-1);
+}
+
+static int thermometer_stop(struct thermometer *thermometer)
+{
+	int i;
+
+	INFO("Closing/flushing output files\n");
+
+	for (i = 0; i < thermometer->nr_tz; i++)
+		fclose(thermometer->tz[i].file_out);
+
+	return 0;
+}
+
+int main(int argc, char *argv[], char *const envp[])
+{
+	struct options options = {
+		.loglvl = LOG_DEBUG,
+		.logopt = TO_STDOUT,
+		.output = ".",
+	};
+	struct configuration config = { 0 };
+	struct thermometer thermometer = { 0 };
+
+	pid_t pid = -1;
+
+	if (options_init(argc, argv, &options))
+		return THERMOMETER_OPTION_ERROR;
+
+	if (log_init(options.loglvl, argv[0], options.logopt))
+		return THERMOMETER_LOG_ERROR;
+
+	if (configuration_init(options.config, &config))
+		return THERMOMETER_CONFIG_ERROR;
+
+	if (uptimeofday_init())
+		return THERMOMETER_TIME_ERROR;
+
+	if (thermometer_init(&config, &thermometer))
+		return THERMOMETER_INIT_ERROR;
+
+	if (thermometer_start(&thermometer, &options))
+		return THERMOMETER_RUNTIME_ERROR;
+
+	if (thermometer_execute(argc - optind, &argv[optind], envp, &pid))
+		return THERMOMETER_RUNTIME_ERROR;
+
+	if (thermometer_wait(&options, pid))
+		return THERMOMETER_RUNTIME_ERROR;
+
+	if (thermometer_stop(&thermometer))
+		return THERMOMETER_RUNTIME_ERROR;
+
+	return THERMOMETER_SUCCESS;
+}
--- a/tools/thermal/thermometer/thermometer.conf
+++ b/tools/thermal/thermometer/thermometer.conf
@ -0,0 +1,5 @@
+
+thermal-zones = (
+	      {	name = "cpu[0-9]-thermal";
+		polling = 100; }
+      )