ARM: dts: OMAP2+: Simplify NAND support
Commit 8c8a777 (ARM: OMAP2+: Add function to read GPMC settings from device-tree) added a device-tree property "gpmc,device-nand" to indicate is the GPMC child device is NAND. This commit should have updated the GPMC NAND documentation (Documentation/devicetree/bindings/mtd/gpmc-nand.txt) to list the property "gpmc,device-nand" as a required property and also updated the example. However, this property is redundant and not needed because the GPMC child device node for NAND is called "nand". Therefore, remove this property. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
		
							parent
							
								
									496c8a0bbb
								
							
						
					
					
						commit
						f40739faba
					
				| @ -95,7 +95,6 @@ GPMC chip-select settings properties for child nodes. All are optional. | ||||
| - gpmc,burst-wrap	Enables wrap bursting | ||||
| - gpmc,burst-read	Enables read page/burst mode | ||||
| - gpmc,burst-write	Enables write page/burst mode | ||||
| - gpmc,device-nand	Device is NAND | ||||
| - gpmc,device-width	Total width of device(s) connected to a GPMC | ||||
| 			chip-select in bytes. The GPMC supports 8-bit | ||||
| 			and 16-bit devices and so this property must be | ||||
|  | ||||
| @ -105,7 +105,6 @@ | ||||
| 		nand-bus-width = <8>; | ||||
| 
 | ||||
| 		ti,nand-ecc-opt = "sw"; | ||||
| 		gpmc,device-nand; | ||||
| 		gpmc,cs-on-ns = <0>; | ||||
| 		gpmc,cs-rd-off-ns = <36>; | ||||
| 		gpmc,cs-wr-off-ns = <36>; | ||||
|  | ||||
| @ -102,8 +102,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, | ||||
| 		if (gpmc_nand_data->of_node) { | ||||
| 			gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); | ||||
| 		} else { | ||||
| 			s.device_nand = true; | ||||
| 
 | ||||
| 			/* Enable RD PIN Monitoring Reg */ | ||||
| 			if (gpmc_nand_data->dev_ready) { | ||||
| 				s.wait_on_read = true; | ||||
| @ -111,6 +109,8 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, | ||||
| 			} | ||||
| 		} | ||||
| 
 | ||||
| 		s.device_nand = true; | ||||
| 
 | ||||
| 		if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) | ||||
| 			s.device_width = GPMC_DEVWIDTH_16BIT; | ||||
| 		else | ||||
|  | ||||
| @ -1245,7 +1245,6 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) | ||||
| 
 | ||||
| 	p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); | ||||
| 	p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); | ||||
| 	p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); | ||||
| 	of_property_read_u32(np, "gpmc,device-width", &p->device_width); | ||||
| 	of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); | ||||
| 
 | ||||
|  | ||||
		Loading…
	
		Reference in New Issue
	
	Block a user