leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master'

Browse Source
This commit is contained in:
Steven Whitehouse 2006-02-27 13:27:34 -05:00
commit f3b270a478
137 changed files with 1611 additions and 1670 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/filesystems/ntfs.txt
View File

@ -457,6 +457,12 @@ ChangeLog
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
2.1.26:
- Implement support for sector sizes above 512 bytes (up to the maximum
supported by NTFS which is 4096 bytes).
- Enhance support for NTFS volumes which were supported by Windows but
not by Linux due to invalid attribute list attribute flags.
- A few minor updates and bug fixes.
2.1.25:
- Write support is now extended with write(2) being able to both
overwrite existing file data and to extend files. Also, if a write

9
Documentation/filesystems/tmpfs.txt
View File

@ -92,6 +92,15 @@ NodeList format is a comma-separated list of decimal numbers and ranges,
a range being two hyphen-separated decimal numbers, the smallest and
largest node numbers in the range. For example, mpol=bind:0-3,5,7,9-15
Note that trying to mount a tmpfs with an mpol option will fail if the
running kernel does not support NUMA; and will fail if its nodelist
specifies a node >= MAX_NUMNODES. If your system relies on that tmpfs
being mounted, but from time to time runs a kernel built without NUMA
capability (perhaps a safe recovery kernel), or configured to support
fewer nodes, then it is advisable to omit the mpol option from automatic
mount options. It can be added later, when the tmpfs is already mounted
on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
To specify the initial root directory you can use the following mount
options:

4
Documentation/x86_64/boot-options.txt
View File

@ -52,6 +52,10 @@ APICs
apicmaintimer. Useful when your PIT timer is totally
broken.
disable_8254_timer / enable_8254_timer
Enable interrupt 0 timer routing over the 8254 in addition to over
the IO-APIC. The kernel tries to set a sensible default.
Early Console
syntax: earlyprintk=vga

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
EXTRAVERSION =-rc4
EXTRAVERSION =-rc5
NAME=Sliding Snow Leopard
# *DOCUMENTATION*

14
arch/arm/mach-at91rm9200/gpio.c
View File

@ -274,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
gpio = &irq_desc[pin];
while (isr) {
if (isr & 1)
gpio->handle(pin, gpio, regs);
if (isr & 1) {
if (unlikely(gpio->disable_depth)) {
/*
* The core ARM interrupt handler lazily disables IRQs so
* another IRQ must be generated before it actually gets
* here to be disabled on the GPIO controller.
*/
gpio_irq_mask(pin);
}
else
gpio->handle(pin, gpio, regs);
}
pin++;
gpio++;
isr >>= 1;

3
arch/i386/Kconfig
View File

@ -733,7 +733,7 @@ config PHYSICAL_START
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

2
arch/i386/kernel/Makefile
View File

@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
quirks.o i8237.o
quirks.o i8237.o topology.o
obj-y += cpu/
obj-y += timers/

3
arch/i386/kernel/acpi/boot.c
View File

@ -44,9 +44,6 @@ extern void __init clustered_apic_check(void);
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC

32
arch/i386/kernel/cpu/common.c
View File

@ -4,6 +4,7 @@
#include <linux/smp.h>
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/bootmem.h>
#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/i387.h>
@ -18,6 +19,9 @@
#include "cpu.h"
DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
@ -571,8 +575,9 @@ void __devinit cpu_init(void)
int cpu = smp_processor_id();
struct tss_struct * t = &per_cpu(init_tss, cpu);
struct thread_struct *thread = &current->thread;
struct desc_struct *gdt = get_cpu_gdt_table(cpu);
struct desc_struct *gdt;
__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
if (cpu_test_and_set(cpu, cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
@ -589,6 +594,25 @@ void __devinit cpu_init(void)
set_in_cr4(X86_CR4_TSD);
}
/*
* This is a horrible hack to allocate the GDT. The problem
* is that cpu_init() is called really early for the boot CPU
* (and hence needs bootmem) but much later for the secondary
* CPUs, when bootmem will have gone away
*/
if (NODE_DATA(0)->bdata->node_bootmem_map) {
gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
/* alloc_bootmem_pages panics on failure, so no check */
memset(gdt, 0, PAGE_SIZE);
} else {
gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
if (unlikely(!gdt)) {
printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
for (;;)
local_irq_enable();
}
}
/*
* Initialize the per-CPU GDT with the boot GDT,
* and set up the GDT descriptor:
@ -601,10 +625,10 @@ void __devinit cpu_init(void)
((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
(CPU_16BIT_STACK_SIZE - 1);
cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
cpu_gdt_descr[cpu].address = (unsigned long)gdt;
cpu_gdt_descr->size = GDT_SIZE - 1;
cpu_gdt_descr->address = (unsigned long)gdt;
load_gdt(&cpu_gdt_descr[cpu]);
load_gdt(cpu_gdt_descr);
load_idt(&idt_descr);
/*

12
arch/i386/kernel/efi.c
View File

@ -103,17 +103,19 @@ static void efi_call_phys_prelog(void)
*/
local_flush_tlb();
cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
per_cpu(cpu_gdt_descr, 0).address =
__pa(per_cpu(cpu_gdt_descr, 0).address);
load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
}
static void efi_call_phys_epilog(void)
{
unsigned long cr4;
cpu_gdt_descr[0].address =
(unsigned long) __va(cpu_gdt_descr[0].address);
load_gdt(&cpu_gdt_descr[0]);
per_cpu(cpu_gdt_descr, 0).address =
(unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
cr4 = read_cr4();
if (cr4 & X86_CR4_PSE) {

2
arch/i386/kernel/head.S
View File

@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table)
.quad 0x0000000000000000 /* 0xf0 - unused */
.quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */
/* Be sure this is zeroed to avoid false validations in Xen */
.fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0

2
arch/i386/kernel/i386_ksyms.c
View File

@ -3,8 +3,6 @@
#include <asm/checksum.h>
#include <asm/desc.h>
EXPORT_SYMBOL_GPL(cpu_gdt_descr);
EXPORT_SYMBOL(__down_failed);
EXPORT_SYMBOL(__down_failed_interruptible);
EXPORT_SYMBOL(__down_failed_trylock);

6
arch/i386/kernel/io_apic.c
View File

@ -2566,8 +2566,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
spin_unlock_irqrestore(&ioapic_lock, flags);
/* Sanity check */
if (reg_00.bits.ID != apic_id)
panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
if (reg_00.bits.ID != apic_id) {
printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
return -1;
}
}
apic_printk(APIC_VERBOSE, KERN_INFO

16
arch/i386/kernel/kprobes.c
View File

@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode)
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
/* insn: must be on special executable page on i386. */
p->ainsn.insn = get_insn_slot();
if (!p->ainsn.insn)
return -ENOMEM;
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
p->opcode = *p->addr;
return 0;
@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
(unsigned long) p->addr + sizeof(kprobe_opcode_t));
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
{
down(&kprobe_mutex);
free_insn_slot(p->ainsn.insn);
up(&kprobe_mutex);
}
static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
kcb->prev_kprobe.kp = kprobe_running();
@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
if (p->opcode == BREAKPOINT_INSTRUCTION)
regs->eip = (unsigned long)p->addr;
else
regs->eip = (unsigned long)&p->ainsn.insn;
regs->eip = (unsigned long)p->ainsn.insn;
}
/* Called with kretprobe_lock held */
@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p,
{
unsigned long *tos = (unsigned long *)&regs->esp;
unsigned long next_eip = 0;
unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
unsigned long copy_eip = (unsigned long)p->ainsn.insn;
unsigned long orig_eip = (unsigned long)p->addr;
switch (p->ainsn.insn[0]) {

10
arch/i386/kernel/mpparse.c
View File

@ -915,6 +915,7 @@ void __init mp_register_ioapic (
u32 gsi_base)
{
int idx = 0;
int tmpid;
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@ -935,9 +936,14 @@ void __init mp_register_ioapic (
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
tmpid = io_apic_get_unique_id(idx, id);
else
mp_ioapics[idx].mpc_apicid = id;
tmpid = id;
if (tmpid == -1) {
nr_ioapics--;
return;
}
mp_ioapics[idx].mpc_apicid = tmpid;
mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
/*

6
arch/i386/kernel/smpboot.c
View File

@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu)
unsigned long start_eip;
unsigned short nmi_high = 0, nmi_low = 0;
if (!cpu_gdt_descr[cpu].address &&
!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
printk("Failed to allocate GDT for CPU %d\n", cpu);
return 1;
}
++cpucount;
/*

6
arch/i386/mach-default/topology.c → arch/i386/kernel/topology.c
View File

@ -1,12 +1,12 @@
/*
* arch/i386/mach-generic/topology.c - Populate driverfs with topology information
* arch/i386/kernel/topology.c - Populate driverfs with topology information
*
* Written by: Matthew Dobson, IBM Corporation
* Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -34,7 +34,7 @@ static struct i386_cpu cpu_devices[NR_CPUS];
int arch_register_cpu(int num){
struct node *parent = NULL;
#ifdef CONFIG_NUMA
int node = cpu_to_node(num);
if (node_online(node))

2
arch/i386/mach-default/Makefile
View File

@ -2,4 +2,4 @@
# Makefile for the linux kernel.
#
obj-y := setup.o topology.o
obj-y := setup.o

3
arch/i386/mach-voyager/voyager_basic.c
View File

@ -23,6 +23,8 @@
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/sysrq.h>
#include <linux/smp.h>
#include <linux/nodemask.h>
#include <asm/io.h>
#include <asm/voyager.h>
#include <asm/vic.h>
@ -328,4 +330,3 @@ void machine_power_off(void)
if (pm_power_off)
pm_power_off();
}

1
arch/i386/mach-voyager/voyager_smp.c
View File

@ -402,6 +402,7 @@ find_smp_config(void)
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
cpu_possible_map = phys_cpu_present_map;
printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
/* Here we set up the VIC to enable SMP */
/* enable the CPIs by writing the base vector to their register */

1
arch/ia64/Kconfig
View File

@ -453,6 +453,7 @@ source "arch/ia64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

6
arch/m32r/Makefile
View File

@ -12,14 +12,14 @@ CFLAGS_MODULE += -mmodel=large
ifdef CONFIG_CHIP_VDEC2
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel
else
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -O2
endif
cflags-$(CONFIG_ISA_M32R) += -DNO_FPU
aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -Wa,-no-bitinst
aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -O2 -Wa,-no-bitinst
CFLAGS += $(cflags-y)
AFLAGS += $(aflags-y)

24
arch/m32r/kernel/signal.c
View File

@ -36,7 +36,7 @@ int do_signal(struct pt_regs *, sigset_t *);
asmlinkage int
sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
unsigned long r2, unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, struct pt_regs regs)
unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
sigset_t saveset, newset;
@ -54,21 +54,21 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs.r0 = -EINTR;
regs->r0 = -EINTR;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
if (do_signal(&regs, &saveset))
return regs.r0;
if (do_signal(regs, &saveset))
return regs->r0;
}
}
asmlinkage int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
unsigned long r2, unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, struct pt_regs regs)
unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
return do_sigaltstack(uss, uoss, regs.spu);
return do_sigaltstack(uss, uoss, regs->spu);
}
@ -140,11 +140,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
asmlinkage int
sys_rt_sigreturn(unsigned long r0, unsigned long r1,
unsigned long r2, unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, struct pt_regs regs)
unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu;
struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->spu;
sigset_t set;
stack_t st;
int result;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@ -158,14 +157,11 @@ sys_rt_sigreturn(unsigned long r0, unsigned long r1,
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(&regs, &frame->uc.uc_mcontext, &result))
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result))
goto badframe;
if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->spu) == -EFAULT)
goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
do_sigaltstack(&st, NULL, regs.spu);
return result;

4
arch/m32r/lib/usercopy.c
View File

@ -64,7 +64,7 @@ do { \
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
: "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \
@ -101,7 +101,7 @@ do { \
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
: "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \

2
arch/mips/kernel/scall32-o32.S
View File

@ -626,7 +626,7 @@ einval: li v0, -EINVAL
sys sys_fstatat64 4
sys sys_unlinkat 3
sys sys_renameat 4 /* 4295 */
sys sys_linkat 4
sys sys_linkat 5
sys sys_symlinkat 3
sys sys_readlinkat 4
sys sys_fchmodat 3

2
arch/powerpc/Kconfig
View File

@ -963,7 +963,7 @@ source "arch/powerpc/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on PPC64
depends on PPC64 && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

174
arch/powerpc/configs/g5_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc5
# Tue Dec 20 15:59:30 2005
# Linux kernel version: 2.6.16-rc2
# Fri Feb 10 17:33:08 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@ -16,6 +16,10 @@ CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
CONFIG_GENERIC_TBSYNC=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
@ -26,13 +30,12 @@ CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_NR_CPUS=4
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
@ -112,13 +117,12 @@ CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
@ -151,6 +155,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@ -202,6 +207,7 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@ -239,6 +245,7 @@ CONFIG_NETFILTER=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@ -255,65 +262,6 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@ -324,6 +272,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@ -342,7 +295,6 @@ CONFIG_LLC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@ -545,13 +497,7 @@ CONFIG_SCSI_SATA_SVW=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@ -614,7 +560,6 @@ CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
@ -630,6 +575,7 @@ CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
#
# Network device support
@ -682,8 +628,9 @@ CONFIG_E1000=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
@ -861,8 +808,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_KEYWEST=y
CONFIG_I2C_PMAC_SMU=y
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@ -894,6 +840,12 @@ CONFIG_I2C_PMAC_SMU=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
@ -961,7 +913,6 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@ -1008,9 +959,10 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@ -1024,6 +976,8 @@ CONFIG_SND_GENERIC_DRIVER=y
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@ -1032,39 +986,38 @@ CONFIG_SND_GENERIC_DRIVER=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
@ -1136,13 +1089,16 @@ CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
@ -1159,6 +1115,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@ -1207,6 +1164,7 @@ CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
@ -1287,6 +1245,10 @@ CONFIG_USB_EZUSB=y
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
#
# File systems
#
@ -1317,6 +1279,7 @@ CONFIG_XFS_EXPORT=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@ -1357,6 +1320,7 @@ CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@ -1426,6 +1390,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@ -1481,10 +1446,6 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@ -1497,24 +1458,31 @@ CONFIG_OPROFILE=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options

173
arch/powerpc/configs/ppc64_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc5
# Tue Dec 20 15:59:38 2005
# Linux kernel version: 2.6.16-rc2
# Fri Feb 10 17:32:14 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@ -16,6 +16,10 @@ CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@ -48,8 +51,6 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
@ -59,8 +60,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@ -69,8 +72,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
@ -113,7 +118,6 @@ CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_XICS=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
@ -124,8 +128,8 @@ CONFIG_RTAS_FLASH=m
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
@ -158,6 +162,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
@ -178,6 +183,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
@ -221,6 +227,7 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@ -260,6 +267,7 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@ -277,65 +285,6 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@ -346,6 +295,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@ -364,7 +318,6 @@ CONFIG_LLC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@ -572,13 +525,7 @@ CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA24XX=m
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@ -642,8 +589,6 @@ CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
#
# I2O device support
@ -659,6 +604,7 @@ CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
#
# Network device support
@ -731,6 +677,7 @@ CONFIG_E1000=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@ -853,6 +800,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@ -880,6 +828,7 @@ CONFIG_HVCS=m
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@ -923,8 +872,7 @@ CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_KEYWEST=y
CONFIG_I2C_PMAC_SMU=y
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@ -956,6 +904,12 @@ CONFIG_I2C_PMAC_SMU=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
@ -1028,7 +982,6 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@ -1073,9 +1026,10 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@ -1089,6 +1043,8 @@ CONFIG_SND_GENERIC_DRIVER=y
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@ -1097,39 +1053,38 @@ CONFIG_SND_GENERIC_DRIVER=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
@ -1201,13 +1156,16 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@ -1221,6 +1179,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@ -1306,6 +1265,10 @@ CONFIG_INFINIBAND_IPOIB=m
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
#
# File systems
#
@ -1340,6 +1303,7 @@ CONFIG_XFS_EXPORT=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@ -1379,6 +1343,7 @@ CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@ -1449,6 +1414,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@ -1504,10 +1470,6 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@ -1520,18 +1482,20 @@ CONFIG_OPROFILE=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
@ -1540,6 +1504,11 @@ CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options

127
arch/powerpc/configs/pseries_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc5
# Tue Dec 20 15:59:40 2005
# Linux kernel version: 2.6.16-rc2
# Fri Feb 10 17:33:32 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@ -16,6 +16,10 @@ CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
@ -33,7 +37,6 @@ CONFIG_NR_CPUS=128
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
@ -113,7 +118,6 @@ CONFIG_PPC_PSERIES=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_XICS=y
# CONFIG_U3_DART is not set
CONFIG_MPIC=y
@ -123,8 +127,8 @@ CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_GENERIC_TBSYNC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
@ -145,6 +149,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
@ -165,6 +170,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
@ -209,6 +215,7 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@ -248,6 +255,7 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@ -265,65 +273,6 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@ -334,6 +283,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@ -352,7 +306,6 @@ CONFIG_LLC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@ -550,13 +503,7 @@ CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA24XX=m
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@ -678,6 +625,7 @@ CONFIG_E1000=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@ -803,6 +751,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@ -908,6 +857,12 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
@ -976,7 +931,6 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@ -1061,12 +1015,15 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@ -1080,6 +1037,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@ -1166,6 +1124,10 @@ CONFIG_INFINIBAND_IPOIB=m
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
#
# File systems
#
@ -1200,6 +1162,7 @@ CONFIG_XFS_EXPORT=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@ -1240,6 +1203,7 @@ CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@ -1351,10 +1315,6 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@ -1367,18 +1327,20 @@ CONFIG_OPROFILE=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
@ -1387,6 +1349,11 @@ CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options

4
arch/powerpc/kernel/crash.c
View File

@ -134,8 +134,10 @@ static void crash_kexec_prepare_cpus(void)
* the crash CPU will send an IPI and wait for other CPUs to
* respond. If not, proceed the kexec boot even though we failed to
* capture other CPU states.
* Delay of at least 10 seconds.
*/
msecs = 1000000;
printk(KERN_ALERT "Sending IPI to other cpus...\n");
msecs = 10000;
while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) {
barrier();
mdelay(1);

1
arch/powerpc/kernel/head_32.S
View File

@ -714,6 +714,7 @@ AltiVecUnavailable:
#ifdef CONFIG_ALTIVEC
bne load_up_altivec /* if from user, just load it up */
#endif /* CONFIG_ALTIVEC */
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
PerformanceMonitor:

109
arch/powerpc/kernel/head_64.S
View File

@ -139,7 +139,7 @@ _GLOBAL(__secondary_hold)
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
/* Grab our linux cpu number */
/* Grab our physical cpu number */
mr r24,r3
/* Tell the master cpu we're here */
@ -153,11 +153,7 @@ _GLOBAL(__secondary_hold)
cmpdi 0,r4,1
bne 100b
#ifdef CONFIG_HMT
SET_REG_IMMEDIATE(r4, .hmt_init)
mtctr r4
bctr
#elif defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init)
mtctr r4
mr r3,r24
@ -319,7 +315,6 @@ exception_marker:
label##_pSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
#define STD_EXCEPTION_ISERIES(n, label, area) \
@ -327,7 +322,6 @@ label##_pSeries: \
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(area); \
EXCEPTION_PROLOG_ISERIES_2; \
b label##_common
@ -337,7 +331,6 @@ label##_iSeries: \
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \
lbz r10,PACAPROCENABLED(r13); \
cmpwi 0,r10,0; \
@ -390,6 +383,7 @@ label##_common: \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
DISABLE_INTS; \
bl .ppc64_runlatch_on; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
b .ret_from_except_lite
@ -407,7 +401,6 @@ __start_interrupts:
_machine_check_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
. = 0x300
@ -434,7 +427,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
data_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13
RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
@ -460,7 +452,6 @@ data_access_slb_pSeries:
instruction_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13
RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
@ -491,7 +482,6 @@ instruction_access_slb_pSeries:
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
RUNLATCH_ON(r9)
mr r9,r13
mfmsr r10
mfspr r13,SPRN_SPRG3
@ -575,7 +565,6 @@ slb_miss_user_pseries:
system_reset_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
.globl machine_check_fwnmi
@ -583,7 +572,6 @@ system_reset_fwnmi:
machine_check_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
#ifdef CONFIG_PPC_ISERIES
@ -894,7 +882,6 @@ unrecov_fer:
.align 7
.globl data_access_common
data_access_common:
RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */
mfspr r10,SPRN_DAR
std r10,PACA_EXGEN+EX_DAR(r13)
mfspr r10,SPRN_DSISR
@ -1042,6 +1029,7 @@ hardware_interrupt_common:
EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
hardware_interrupt_entry:
DISABLE_INTS
bl .ppc64_runlatch_on
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_IRQ
b .ret_from_except_lite
@ -1816,22 +1804,6 @@ _STATIC(start_here_multiplatform)
ori r6,r6,MSR_RI
mtmsrd r6 /* RI on */
#ifdef CONFIG_HMT
/* Start up the second thread on cpu 0 */
mfspr r3,SPRN_PVR
srwi r3,r3,16
cmpwi r3,0x34 /* Pulsar */
beq 90f
cmpwi r3,0x36 /* Icestar */
beq 90f
cmpwi r3,0x37 /* SStar */
beq 90f
b 91f /* HMT not supported */
90: li r3,0
bl .hmt_start_secondary
91:
#endif
/* The following gets the stack and TOC set up with the regs */
/* pointing to the real addr of the kernel stack. This is */
/* all done to support the C function call below which sets */
@ -1945,77 +1917,8 @@ _STATIC(start_here_common)
bl .start_kernel
_GLOBAL(hmt_init)
#ifdef CONFIG_HMT
LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
mfspr r7,SPRN_PVR
srwi r7,r7,16
cmpwi r7,0x34 /* Pulsar */
beq 90f
cmpwi r7,0x36 /* Icestar */
beq 91f
cmpwi r7,0x37 /* SStar */
beq 91f
b 101f
90: mfspr r6,SPRN_PIR
andi. r6,r6,0x1f
b 92f
91: mfspr r6,SPRN_PIR
andi. r6,r6,0x3ff
92: sldi r4,r24,3
stwx r6,r5,r4
bl .hmt_start_secondary
b 101f
__hmt_secondary_hold:
LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
clrldi r5,r5,4
li r7,0
mfspr r6,SPRN_PIR
mfspr r8,SPRN_PVR
srwi r8,r8,16
cmpwi r8,0x34
bne 93f
andi. r6,r6,0x1f
b 103f
93: andi. r6,r6,0x3f
103: lwzx r8,r5,r7
cmpw r8,r6
beq 104f
addi r7,r7,8
b 103b
104: addi r7,r7,4
lwzx r9,r5,r7
mr r24,r9
101:
#endif
mr r3,r24
b .pSeries_secondary_smp_init
#ifdef CONFIG_HMT
_GLOBAL(hmt_start_secondary)
LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold)
clrldi r4,r4,4
mtspr SPRN_NIADORM, r4
mfspr r4, SPRN_MSRDORM
li r5, -65
and r4, r4, r5
mtspr SPRN_MSRDORM, r4
lis r4,0xffef
ori r4,r4,0x7403
mtspr SPRN_TSC, r4
li r4,0x1f4
mtspr SPRN_TST, r4
mfspr r4, SPRN_HID0
ori r4, r4, 0x1
mtspr SPRN_HID0, r4
mfspr r4, SPRN_CTRLF
oris r4, r4, 0x40
mtspr SPRN_CTRLT, r4
blr
#endif
/* Not reached */
BUG_OPCODE
/*
* We put a few things here that have to be page-aligned.

10
arch/powerpc/kernel/machine_kexec_64.c
View File

@ -26,8 +26,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */
int default_machine_kexec_prepare(struct kimage *image)
{
int i;
@ -61,7 +59,7 @@ int default_machine_kexec_prepare(struct kimage *image)
*/
if (htab_address) {
low = __pa(htab_address);
high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE;
high = low + htab_size_bytes;
for (i = 0; i < image->nr_segments; i++) {
begin = image->segment[i].mem;
@ -294,7 +292,7 @@ void default_machine_kexec(struct kimage *image)
}
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base, htab_size, kernel_end;
static unsigned long htab_base, kernel_end;
static struct property htab_base_prop = {
.name = "linux,htab-base",
@ -305,7 +303,7 @@ static struct property htab_base_prop = {
static struct property htab_size_prop = {
.name = "linux,htab-size",
.length = sizeof(unsigned long),
.value = (unsigned char *)&htab_size,
.value = (unsigned char *)&htab_size_bytes,
};
static struct property kernel_end_prop = {
@ -331,8 +329,6 @@ static void __init export_htab_values(void)
htab_base = __pa(htab_address);
prom_add_property(node, &htab_base_prop);
htab_size = 1UL << ppc64_pft_size;
prom_add_property(node, &htab_size_prop);
out:

32
arch/powerpc/kernel/process.c
View File

@ -888,3 +888,35 @@ void dump_stack(void)
show_stack(current, NULL);
}
EXPORT_SYMBOL(dump_stack);
#ifdef CONFIG_PPC64
void ppc64_runlatch_on(void)
{
unsigned long ctrl;
if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) {
HMT_medium();
ctrl = mfspr(SPRN_CTRLF);
ctrl |= CTRL_RUNLATCH;
mtspr(SPRN_CTRLT, ctrl);
set_thread_flag(TIF_RUNLATCH);
}
}
void ppc64_runlatch_off(void)
{
unsigned long ctrl;
if (cpu_has_feature(CPU_FTR_CTRL) && test_thread_flag(TIF_RUNLATCH)) {
HMT_medium();
clear_thread_flag(TIF_RUNLATCH);
ctrl = mfspr(SPRN_CTRLF);
ctrl &= ~CTRL_RUNLATCH;
mtspr(SPRN_CTRLT, ctrl);
}
}
#endif

54
arch/powerpc/kernel/prom.c
View File

@ -816,8 +816,6 @@ void __init unflatten_device_tree(void)
{
unsigned long start, mem, size;
struct device_node **allnextp = &allnodes;
char *p = NULL;
int l = 0;
DBG(" -> unflatten_device_tree()\n");
@ -857,19 +855,6 @@ void __init unflatten_device_tree(void)
if (of_chosen == NULL)
of_chosen = of_find_node_by_path("/chosen@0");
/* Retreive command line */
if (of_chosen != NULL) {
p = (char *)get_property(of_chosen, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE));
}
#ifdef CONFIG_CMDLINE
if (l == 0 || (l == 1 && (*p) == 0))
strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
DBG("Command line is: %s\n", cmd_line);
DBG(" <- unflatten_device_tree()\n");
}
@ -940,6 +925,8 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
{
u32 *prop;
unsigned long *lprop;
unsigned long l;
char *p;
DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
@ -1004,6 +991,41 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
crashk_res.end = crashk_res.start + *lprop - 1;
#endif
/* Retreive command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
#ifdef CONFIG_CMDLINE
if (l == 0 || (l == 1 && (*p) == 0))
strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
DBG("Command line is: %s\n", cmd_line);
if (strstr(cmd_line, "mem=")) {
char *p, *q;
unsigned long maxmem = 0;
for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
q = p + 4;
if (p > cmd_line && p[-1] != ' ')
continue;
maxmem = simple_strtoul(q, &q, 0);
if (*q == 'k' || *q == 'K') {
maxmem <<= 10;
++q;
} else if (*q == 'm' || *q == 'M') {
maxmem <<= 20;
++q;
} else if (*q == 'g' || *q == 'G') {
maxmem <<= 30;
++q;
}
}
memory_limit = maxmem;
}
/* break now */
return 1;
}
@ -1124,7 +1146,7 @@ static void __init early_reserve_mem(void)
size_32 = *(reserve_map_32++);
if (size_32 == 0)
break;
DBG("reserving: %lx -> %lx\n", base_32, size_32);
DBG("reserving: %x -> %x\n", base_32, size_32);
lmb_reserve(base_32, size_32);
}
return;

38
arch/powerpc/kernel/prom_init.c
View File

@ -205,14 +205,6 @@ static cell_t __initdata regbuf[1024];
#define MAX_CPU_THREADS 2
/* TO GO */
#ifdef CONFIG_HMT
struct {
unsigned int pir;
unsigned int threadid;
} hmt_thread_data[NR_CPUS];
#endif /* CONFIG_HMT */
/*
* Error results ... some OF calls will return "-1" on error, some
* will return 0, some will return either. To simplify, here are
@ -1319,10 +1311,6 @@ static void __init prom_hold_cpus(void)
*/
*spinloop = 0;
#ifdef CONFIG_HMT
for (i = 0; i < NR_CPUS; i++)
RELOC(hmt_thread_data)[i].pir = 0xdeadbeef;
#endif
/* look for cpus */
for (node = 0; prom_next_node(&node); ) {
type[0] = 0;
@ -1389,32 +1377,6 @@ static void __init prom_hold_cpus(void)
/* Reserve cpu #s for secondary threads. They start later. */
cpuid += cpu_threads;
}
#ifdef CONFIG_HMT
/* Only enable HMT on processors that provide support. */
if (__is_processor(PV_PULSAR) ||
__is_processor(PV_ICESTAR) ||
__is_processor(PV_SSTAR)) {
prom_printf(" starting secondary threads\n");
for (i = 0; i < NR_CPUS; i += 2) {
if (!cpu_online(i))
continue;
if (i == 0) {
unsigned long pir = mfspr(SPRN_PIR);
if (__is_processor(PV_PULSAR)) {
RELOC(hmt_thread_data)[i].pir =
pir & 0x1f;
} else {
RELOC(hmt_thread_data)[i].pir =
pir & 0x3ff;
}
}
}
} else {
prom_printf("Processor is not HMT capable\n");
}
#endif
if (cpuid > NR_CPUS)
prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)

7
arch/powerpc/mm/hash_native_64.c
View File

@ -403,12 +403,17 @@ static void native_hpte_clear(void)
*/
hpte_v = hptep->v;
/*
* Call __tlbie() here rather than tlbie() since we
* already hold the native_tlbie_lock.
*/
if (hpte_v & HPTE_V_VALID) {
hptep->v = 0;
tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0);
__tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K);
}
}
asm volatile("eieio; tlbsync; ptesync":::"memory");
spin_unlock(&native_tlbie_lock);
local_irq_restore(flags);
}

3
arch/powerpc/mm/hash_utils_64.c
View File

@ -88,6 +88,7 @@ static unsigned long _SDR1;
struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
hpte_t *htab_address;
unsigned long htab_size_bytes;
unsigned long htab_hash_mask;
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
@ -399,7 +400,7 @@ void create_section_mapping(unsigned long start, unsigned long end)
void __init htab_initialize(void)
{
unsigned long table, htab_size_bytes;
unsigned long table;
unsigned long pteg_count;
unsigned long mode_rw;
unsigned long base = 0, size = 0;

1
arch/powerpc/oprofile/Kconfig
View File

@ -1,4 +1,5 @@
config PROFILING
depends on !PPC_ISERIES
bool "Profiling support (EXPERIMENTAL)"
help
Say Y here to enable the extended profiling support mechanisms used

2
arch/powerpc/platforms/iseries/lpevents.c
View File

@ -184,6 +184,8 @@ void setup_hvlpevent_queue(void)
{
void *eventStack;
spin_lock_init(&hvlpevent_queue.lock);
/* Allocate a page for the Event Stack. */
eventStack = alloc_bootmem_pages(LpEventStackSize);
memset(eventStack, 0, LpEventStackSize);

1
arch/powerpc/platforms/iseries/setup.c
View File

@ -648,6 +648,7 @@ static void yield_shared_processor(void)
* here and let the timer_interrupt code sort out the actual time.
*/
get_lppaca()->int_dword.fields.decr_int = 1;
ppc64_runlatch_on();
process_iSeries_events();
}

4
arch/powerpc/platforms/maple/pci.c
View File

@ -435,8 +435,8 @@ void __init maple_pci_init(void)
PCI_DN(np)->busno = 0xf0;
}
/* Tell pci.c to use the common resource allocation mecanism */
pci_probe_only = 0;
/* Tell pci.c to not change any resource allocations. */
pci_probe_only = 1;
/* Allow all IO */
io_page_mask = -1;

7
arch/powerpc/platforms/pseries/Kconfig
View File

@ -9,13 +9,6 @@ config PPC_SPLPAR
processors, that is, which share physical processors between
two or more partitions.
config HMT
bool "Hardware multithreading"
depends on SMP && PPC_PSERIES && BROKEN
help
This option enables hardware multithreading on RS64 cpus.
pSeries systems p620 and p660 have such a cpu type.
config EEH
bool "PCI Extended Error Handling (EEH)" if EMBEDDED
depends on PPC_PSERIES

11
arch/powerpc/sysdev/mpic.c
View File

@ -234,7 +234,7 @@ static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source,
spin_lock_irqsave(&mpic->fixup_lock, flags);
writeb(0x10 + 2 * fixup->index, fixup->base + 2);
tmp = readl(fixup->base + 4);
tmp &= ~1U;
tmp |= 1;
writel(tmp, fixup->base + 4);
spin_unlock_irqrestore(&mpic->fixup_lock, flags);
}
@ -446,14 +446,15 @@ static unsigned int mpic_startup_irq(unsigned int irq)
#ifdef CONFIG_MPIC_BROKEN_U3
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = irq - mpic->irq_offset;
if (mpic_is_ht_interrupt(mpic, src))
mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
#endif /* CONFIG_MPIC_BROKEN_U3 */
mpic_enable_irq(irq);
#ifdef CONFIG_MPIC_BROKEN_U3
if (mpic_is_ht_interrupt(mpic, src))
mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
#endif /* CONFIG_MPIC_BROKEN_U3 */
return 0;
}

1
arch/ppc/kernel/head.S
View File

@ -751,6 +751,7 @@ AltiVecUnavailable:
#ifdef CONFIG_ALTIVEC
bne load_up_altivec /* if from user, just load it up */
#endif /* CONFIG_ALTIVEC */
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
#ifdef CONFIG_PPC64BRIDGE

212
arch/ppc/xmon/adb.c
View File

@ -1,212 +0,0 @@
/*
* Copyright (C) 1996 Paul Mackerras.
*/
#include "nonstdio.h"
#include "privinst.h"
#define scanhex xmon_scanhex
#define skipbl xmon_skipbl
#define ADB_B (*(volatile unsigned char *)0xf3016000)
#define ADB_SR (*(volatile unsigned char *)0xf3017400)
#define ADB_ACR (*(volatile unsigned char *)0xf3017600)
#define ADB_IFR (*(volatile unsigned char *)0xf3017a00)
static inline void eieio(void) { asm volatile ("eieio" : :); }
#define N_ADB_LOG 1000
struct adb_log {
unsigned char b;
unsigned char ifr;
unsigned char acr;
unsigned int time;
} adb_log[N_ADB_LOG];
int n_adb_log;
void
init_adb_log(void)
{
adb_log[0].b = ADB_B;
adb_log[0].ifr = ADB_IFR;
adb_log[0].acr = ADB_ACR;
adb_log[0].time = get_dec();
n_adb_log = 0;
}
void
dump_adb_log(void)
{
unsigned t, t0;
struct adb_log *ap;
int i;
ap = adb_log;
t0 = ap->time;
for (i = 0; i <= n_adb_log; ++i, ++ap) {
t = t0 - ap->time;
printf("b=%x ifr=%x acr=%x at %d.%.7d\n", ap->b, ap->ifr, ap->acr,
t / 1000000000, (t % 1000000000) / 100);
}
}
void
adb_chklog(void)
{
struct adb_log *ap = &adb_log[n_adb_log + 1];
ap->b = ADB_B;
ap->ifr = ADB_IFR;
ap->acr = ADB_ACR;
if (ap->b != ap[-1].b || (ap->ifr & 4) != (ap[-1].ifr & 4)
|| ap->acr != ap[-1].acr) {
ap->time = get_dec();
++n_adb_log;
}
}
int
adb_bitwait(int bmask, int bval, int fmask, int fval)
{
int i;
struct adb_log *ap;
for (i = 10000; i > 0; --i) {
adb_chklog();
ap = &adb_log[n_adb_log];
if ((ap->b & bmask) == bval && (ap->ifr & fmask) == fval)
return 0;
}
return -1;
}
int
adb_wait(void)
{
if (adb_bitwait(0, 0, 4, 4) < 0) {
printf("adb: ready wait timeout\n");
return -1;
}
return 0;
}
void
adb_readin(void)
{
int i, j;
unsigned char d[64];
if (ADB_B & 8) {
printf("ADB_B: %x\n", ADB_B);
return;
}
i = 0;
adb_wait();
j = ADB_SR;
eieio();
ADB_B &= ~0x20;
eieio();
for (;;) {
if (adb_wait() < 0)
break;
d[i++] = ADB_SR;
eieio();
if (ADB_B & 8)
break;
ADB_B ^= 0x10;
eieio();
}
ADB_B |= 0x30;
if (adb_wait() == 0)
j = ADB_SR;
for (j = 0; j < i; ++j)
printf("%.2x ", d[j]);
printf("\n");
}
int
adb_write(unsigned char *d, int i)
{
int j;
unsigned x;
if ((ADB_B & 8) == 0) {
printf("r: ");
adb_readin();
}
for (;;) {
ADB_ACR = 0x1c;
eieio();
ADB_SR = d[0];
eieio();
ADB_B &= ~0x20;
eieio();
if (ADB_B & 8)
break;
ADB_ACR = 0xc;
eieio();
ADB_B |= 0x20;
eieio();
adb_readin();
}
adb_wait();
for (j = 1; j < i; ++j) {
ADB_SR = d[j];
eieio();
ADB_B ^= 0x10;
eieio();
if (adb_wait() < 0)
break;
}
ADB_ACR = 0xc;
eieio();
x = ADB_SR;
eieio();
ADB_B |= 0x30;
return j;
}
void
adbcmds(void)
{
char cmd;
unsigned rtcu, rtcl, dec, pdec, x;
int i, j;
unsigned char d[64];
cmd = skipbl();
switch (cmd) {
case 't':
for (;;) {
rtcl = get_rtcl();
rtcu = get_rtcu();
dec = get_dec();
printf("rtc u=%u l=%u dec=%x (%d = %d.%.7d)\n",
rtcu, rtcl, dec, pdec - dec, (pdec - dec) / 1000000000,
((pdec - dec) % 1000000000) / 100);
pdec = dec;
if (cmd == 'x')
break;
while (xmon_read(stdin, &cmd, 1) != 1)
;
}
break;
case 'r':
init_adb_log();
while (adb_bitwait(8, 0, 0, 0) == 0)
adb_readin();
break;
case 'w':
i = 0;
while (scanhex(&x))
d[i++] = x;
init_adb_log();
j = adb_write(d, i);
printf("sent %d bytes\n", j);
while (adb_bitwait(8, 0, 0, 0) == 0)
adb_readin();
break;
case 'l':
dump_adb_log();
break;
}
}

169
arch/ppc/xmon/start.c
View File

@ -6,16 +6,11 @@
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/page.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/cuda.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sysrq.h>
#include <linux/bitops.h>
#include <asm/xmon.h>
#include <asm/prom.h>
#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/errno.h>
#include <asm/processor.h>
@ -26,9 +21,7 @@ static volatile unsigned char *sccc, *sccd;
unsigned int TXRDY, RXRDY, DLAB;
static int xmon_expect(const char *str, unsigned int timeout);
static int use_screen;
static int via_modem;
static int xmon_use_sccb;
#define TB_SPEED 25000000
@ -46,47 +39,6 @@ void buf_access(void)
sccd[3] &= ~DLAB; /* reset DLAB */
}
extern int adb_init(void);
#ifdef CONFIG_PPC_CHRP
/*
* This looks in the "ranges" property for the primary PCI host bridge
* to find the physical address of the start of PCI/ISA I/O space.
* It is basically a cut-down version of pci_process_bridge_OF_ranges.
*/
static unsigned long chrp_find_phys_io_base(void)
{
struct device_node *node;
unsigned int *ranges;
unsigned long base = CHRP_ISA_IO_BASE;
int rlen = 0;
int np;
node = find_devices("isa");
if (node != NULL) {
node = node->parent;
if (node == NULL || node->type == NULL
|| strcmp(node->type, "pci") != 0)
node = NULL;
}
if (node == NULL)
node = find_devices("pci");
if (node == NULL)
return base;
ranges = (unsigned int *) get_property(node, "ranges", &rlen);
np = prom_n_addr_cells(node) + 5;
while ((rlen -= np * sizeof(unsigned int)) >= 0) {
if ((ranges[0] >> 24) == 1 && ranges[2] == 0) {
/* I/O space starting at 0, grab the phys base */
base = ranges[np - 3];
break;
}
ranges += np;
}
return base;
}
#endif /* CONFIG_PPC_CHRP */
#ifdef CONFIG_MAGIC_SYSRQ
static void sysrq_handle_xmon(int key, struct pt_regs *regs,
@ -109,22 +61,6 @@ xmon_map_scc(void)
#ifdef CONFIG_PPC_MULTIPLATFORM
volatile unsigned char *base;
#ifdef CONFIG_PPC_CHRP
base = (volatile unsigned char *) isa_io_base;
if (_machine == _MACH_chrp)
base = (volatile unsigned char *)
ioremap(chrp_find_phys_io_base(), 0x1000);
sccc = base + 0x3fd;
sccd = base + 0x3f8;
if (xmon_use_sccb) {
sccc -= 0x100;
sccd -= 0x100;
}
TXRDY = 0x20;
RXRDY = 1;
DLAB = 0x80;
#endif /* CONFIG_PPC_CHRP */
#elif defined(CONFIG_GEMINI)
/* should already be mapped by the kernel boot */
sccc = (volatile unsigned char *) 0xffeffb0d;
@ -143,7 +79,7 @@ xmon_map_scc(void)
register_sysrq_key('x', &sysrq_xmon_op);
}
static int scc_initialized = 0;
static int scc_initialized;
void xmon_init_scc(void);
@ -163,14 +99,6 @@ xmon_write(void *handle, void *ptr, int nb)
break;
#endif
#ifdef CONFIG_BOOTX_TEXT
if (use_screen) {
/* write it on the screen */
for (i = 0; i < nb; ++i)
btext_drawchar(*p++);
goto out;
}
#endif
if (!scc_initialized)
xmon_init_scc();
ct = 0;
@ -190,7 +118,6 @@ xmon_write(void *handle, void *ptr, int nb)
eieio();
}
out:
#ifdef CONFIG_SMP
if (!locked)
clear_bit(0, &xmon_write_lock);
@ -199,65 +126,7 @@ xmon_write(void *handle, void *ptr, int nb)
}
int xmon_wants_key;
int xmon_adb_keycode;
#ifdef CONFIG_BOOTX_TEXT
static int xmon_adb_shiftstate;
static unsigned char xmon_keytab[128] =
"asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */
"yt123465=97-80]o" /* 0x10 - 0x1f */
"u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */
"\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
"\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
"\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
static unsigned char xmon_shift_keytab[128] =
"ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */
"YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */
"U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */
"\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
"\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
"\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
static int
xmon_get_adb_key(void)
{
int k, t, on;
xmon_wants_key = 1;
for (;;) {
xmon_adb_keycode = -1;
t = 0;
on = 0;
do {
if (--t < 0) {
on = 1 - on;
btext_drawchar(on? 0xdb: 0x20);
btext_drawchar('\b');
t = 200000;
}
do_poll_adb();
} while (xmon_adb_keycode == -1);
k = xmon_adb_keycode;
if (on)
btext_drawstring(" \b");
/* test for shift keys */
if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
xmon_adb_shiftstate = (k & 0x80) == 0;
continue;
}
if (k >= 0x80)
continue; /* ignore up transitions */
k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
if (k != 0)
break;
}
xmon_wants_key = 0;
return k;
}
#endif /* CONFIG_BOOTX_TEXT */
int
xmon_read(void *handle, void *ptr, int nb)
@ -265,18 +134,11 @@ xmon_read(void *handle, void *ptr, int nb)
char *p = ptr;
int i;
#ifdef CONFIG_BOOTX_TEXT
if (use_screen) {
for (i = 0; i < nb; ++i)
*p++ = xmon_get_adb_key();
return i;
}
#endif
if (!scc_initialized)
xmon_init_scc();
for (i = 0; i < nb; ++i) {
while ((*sccc & RXRDY) == 0)
do_poll_adb();
;
buf_access();
*p++ = *sccd;
}
@ -287,7 +149,7 @@ int
xmon_read_poll(void)
{
if ((*sccc & RXRDY) == 0) {
do_poll_adb();
;
return -1;
}
buf_access();
@ -297,15 +159,6 @@ xmon_read_poll(void)
void
xmon_init_scc(void)
{
if ( _machine == _MACH_chrp )
{
sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */
sccd[0] = 12; eieio(); /* DLL = 9600 baud */
sccd[1] = 0; eieio();
sccd[2] = 0; eieio(); /* FCR = 0 */
sccd[3] = 3; eieio(); /* LCR = 8N1 */
sccd[1] = 0; eieio(); /* IER = 0 */
}
scc_initialized = 1;
if (via_modem) {
for (;;) {
@ -321,22 +174,6 @@ xmon_init_scc(void)
}
}
#if 0
extern int (*prom_entry)(void *);
int
xmon_exit(void)
{
struct prom_args {
char *service;
} args;
for (;;) {
args.service = "exit";
(*prom_entry)(&args);
}
}
#endif
void *xmon_stdin;
void *xmon_stdout;

108
arch/ppc/xmon/xmon.c
View File

@ -12,8 +12,6 @@
#include <linux/kallsyms.h>
#include <asm/ptrace.h>
#include <asm/string.h>
#include <asm/prom.h>
#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/xmon.h>
#include "nonstdio.h"
@ -101,9 +99,6 @@ void cacheflush(void);
static void cpu_cmd(void);
#endif /* CONFIG_SMP */
static void csum(void);
#ifdef CONFIG_BOOTX_TEXT
static void vidcmds(void);
#endif
static void bootcmds(void);
static void proccall(void);
static void printtime(void);
@ -522,11 +517,6 @@ cmds(struct pt_regs *excp)
cpu_cmd();
break;
#endif /* CONFIG_SMP */
#ifdef CONFIG_BOOTX_TEXT
case 'v':
vidcmds();
break;
#endif
case 'z':
bootcmds();
break;
@ -618,43 +608,6 @@ static void cpu_cmd(void)
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_BOOTX_TEXT
extern boot_infos_t disp_bi;
static void vidcmds(void)
{
int c = inchar();
unsigned int val, w;
extern int boot_text_mapped;
if (!boot_text_mapped)
return;
if (c != '\n' && scanhex(&val)) {
switch (c) {
case 'd':
w = disp_bi.dispDeviceRowBytes
/ (disp_bi.dispDeviceDepth >> 3);
disp_bi.dispDeviceDepth = val;
disp_bi.dispDeviceRowBytes = w * (val >> 3);
return;
case 'p':
disp_bi.dispDeviceRowBytes = val;
return;
case 'w':
disp_bi.dispDeviceRect[2] = val;
return;
case 'h':
disp_bi.dispDeviceRect[3] = val;
return;
}
}
printf("W = %d (0x%x) H = %d (0x%x) D = %d (0x%x) P = %d (0x%x)\n",
disp_bi.dispDeviceRect[2], disp_bi.dispDeviceRect[2],
disp_bi.dispDeviceRect[3], disp_bi.dispDeviceRect[3],
disp_bi.dispDeviceDepth, disp_bi.dispDeviceDepth,
disp_bi.dispDeviceRowBytes, disp_bi.dispDeviceRowBytes);
}
#endif /* CONFIG_BOOTX_TEXT */
static unsigned short fcstab[256] = {
0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
@ -1020,7 +973,6 @@ dump_hash_table(void)
}
#else
#ifndef CONFIG_PPC64BRIDGE
static void
dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
{
@ -1079,66 +1031,6 @@ dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
printf(" ... %x\n", last_va);
}
#else /* CONFIG_PPC64BRIDGE */
static void
dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
{
extern void *Hash;
extern unsigned long Hash_size;
unsigned *htab = Hash;
unsigned hsize = Hash_size;
unsigned v, hmask, va, last_va;
int found, last_found, i;
unsigned *hg, w1, last_w2, last_va0;
last_found = 0;
hmask = hsize / 128 - 1;
va = start;
start = (start >> 12) & 0xffff;
end = (end >> 12) & 0xffff;
for (v = start; v < end; ++v) {
found = 0;
hg = htab + (((v ^ seg) & hmask) * 32);
w1 = 1 | (seg << 12) | ((v & 0xf800) >> 4);
for (i = 0; i < 8; ++i, hg += 4) {
if (hg[1] == w1) {
found = 1;
break;
}
}
if (!found) {
w1 ^= 2;
hg = htab + ((~(v ^ seg) & hmask) * 32);
for (i = 0; i < 8; ++i, hg += 4) {
if (hg[1] == w1) {
found = 1;
break;
}
}
}
if (!(last_found && found && (hg[3] & ~0x180) == last_w2 + 4096)) {
if (last_found) {
if (last_va != last_va0)
printf(" ... %x", last_va);
printf("\n");
}
if (found) {
printf("%x to %x", va, hg[3]);
last_va0 = va;
}
last_found = found;
}
if (found) {
last_w2 = hg[3] & ~0x180;
last_va = va;
}
va += 4096;
}
if (last_found)
printf(" ... %x\n", last_va);
}
#endif /* CONFIG_PPC64BRIDGE */
static unsigned hash_ctx;
static unsigned hash_start;
static unsigned hash_end;

1
arch/s390/kernel/compat_wrapper.S
View File

@ -1552,6 +1552,7 @@ sys_linkat_wrapper:
llgtr %r3,%r3 # const char *
lgfr %r4,%r4 # int
llgtr %r5,%r5 # const char *
lgfr %r6,%r6 # int
jg sys_linkat
.globl sys_symlinkat_wrapper

1
arch/sparc64/Kconfig
View File

@ -383,6 +383,7 @@ source "arch/sparc64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

2
arch/sparc64/kernel/setup.c
View File

@ -542,6 +542,8 @@ void __init setup_arch(char **cmdline_p)
}
#endif
smp_setup_cpu_possible_map();
paging_init();
}

28
arch/sparc64/kernel/smp.c
View File

@ -1079,18 +1079,12 @@ int setup_profiling_timer(unsigned int multiplier)
return 0;
}
/* Constrain the number of cpus to max_cpus. */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
int instance, mid;
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid < max_cpus)
cpu_set(mid, phys_cpu_present_map);
instance++;
}
if (num_possible_cpus() > max_cpus) {
int instance, mid;
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid != boot_cpu_id) {
@ -1105,6 +1099,22 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
smp_store_cpu_info(boot_cpu_id);
}
/* Set this up early so that things like the scheduler can init
* properly. We use the same cpu mask for both the present and
* possible cpu map.
*/
void __init smp_setup_cpu_possible_map(void)
{
int instance, mid;
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid < NR_CPUS)
cpu_set(mid, phys_cpu_present_map);
instance++;
}
}
void __devinit smp_prepare_boot_cpu(void)
{
if (hard_smp_processor_id() >= NR_CPUS) {

2
arch/um/drivers/cow.h
View File

@ -46,7 +46,7 @@ extern int file_reader(__u64 offset, char *buf, int len, void *arg);
extern int read_cow_header(int (*reader)(__u64, char *, int, void *),
void *arg, __u32 *version_out,
char **backing_file_out, time_t *mtime_out,
unsigned long long *size_out, int *sectorsize_out,
__u64 *size_out, int *sectorsize_out,
__u32 *align_out, int *bitmap_offset_out);
extern int write_cow_header(char *cow_file, int fd, char *backing_file,

6
arch/um/drivers/cow_sys.h
View File

@ -23,17 +23,17 @@ static inline char *cow_strdup(char *str)
return(uml_strdup(str));
}
static inline int cow_seek_file(int fd, unsigned long long offset)
static inline int cow_seek_file(int fd, __u64 offset)
{
return(os_seek_file(fd, offset));
}
static inline int cow_file_size(char *file, unsigned long long *size_out)
static inline int cow_file_size(char *file, __u64 *size_out)
{
return(os_file_size(file, size_out));
}
static inline int cow_write_file(int fd, char *buf, int size)
static inline int cow_write_file(int fd, void *buf, int size)
{
return(os_write_file(fd, buf, size));
}

24
arch/um/drivers/cow_user.c
View File

@ -176,7 +176,7 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
err = -ENOMEM;
header = cow_malloc(sizeof(*header));
if(header == NULL){
cow_printf("Failed to allocate COW V3 header\n");
cow_printf("write_cow_header - failed to allocate COW V3 header\n");
goto out;
}
header->magic = htonl(COW_MAGIC);
@ -196,15 +196,17 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
err = os_file_modtime(header->backing_file, &modtime);
if(err < 0){
cow_printf("Backing file '%s' mtime request failed, "
"err = %d\n", header->backing_file, -err);
cow_printf("write_cow_header - backing file '%s' mtime "
"request failed, err = %d\n", header->backing_file,
-err);
goto out_free;
}
err = cow_file_size(header->backing_file, size);
if(err < 0){
cow_printf("Couldn't get size of backing file '%s', "
"err = %d\n", header->backing_file, -err);
cow_printf("write_cow_header - couldn't get size of "
"backing file '%s', err = %d\n",
header->backing_file, -err);
goto out_free;
}
@ -214,10 +216,11 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
header->alignment = htonl(alignment);
header->cow_format = COW_BITMAP;
err = os_write_file(fd, header, sizeof(*header));
err = cow_write_file(fd, header, sizeof(*header));
if(err != sizeof(*header)){
cow_printf("Write of header to new COW file '%s' failed, "
"err = %d\n", cow_file, -err);
cow_printf("write_cow_header - write of header to "
"new COW file '%s' failed, err = %d\n", cow_file,
-err);
goto out_free;
}
err = 0;
@ -299,7 +302,7 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
}
else if(version == 3){
if(n < sizeof(header->v3)){
cow_printf("read_cow_header - failed to read V2 "
cow_printf("read_cow_header - failed to read V3 "
"header\n");
goto out;
}
@ -359,7 +362,8 @@ int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize,
if(err != sizeof(zero)){
cow_printf("Write of bitmap to new COW file '%s' failed, "
"err = %d\n", cow_file, -err);
err = -EINVAL;
if (err >= 0)
err = -EINVAL;
goto out;
}

34
arch/um/drivers/net_user.c
View File

@ -47,10 +47,12 @@ void tap_check_ips(char *gate_addr, unsigned char *eth_addr)
}
}
/* Do reliable error handling as this fails frequently enough. */
void read_output(int fd, char *output, int len)
{
int remain, n, actual;
int remain, ret, expected;
char c;
char *str;
if(output == NULL){
output = &c;
@ -58,23 +60,31 @@ void read_output(int fd, char *output, int len)
}
*output = '\0';
n = os_read_file(fd, &remain, sizeof(remain));
if(n != sizeof(remain)){
printk("read_output - read of length failed, err = %d\n", -n);
return;
ret = os_read_file(fd, &remain, sizeof(remain));
if (ret != sizeof(remain)) {
expected = sizeof(remain);
str = "length";
goto err;
}
while(remain != 0){
n = (remain < len) ? remain : len;
actual = os_read_file(fd, output, n);
if(actual != n){
printk("read_output - read of data failed, "
"err = %d\n", -actual);
return;
expected = (remain < len) ? remain : len;
ret = os_read_file(fd, output, expected);
if (ret != expected) {
str = "data";
goto err;
}
remain -= actual;
remain -= ret;
}
return;
err:
if (ret < 0)
printk("read_output - read of %s failed, errno = %d\n", str, -ret);
else
printk("read_output - read of %s failed, read only %d of %d bytes\n", str, ret, expected);
}
int net_read(int fd, void *buf, int len)

2
arch/um/drivers/ubd_kern.c
View File

@ -1135,7 +1135,7 @@ static int path_requires_switch(char *from_cmdline, char *from_cow, char *cow)
static int backing_file_mismatch(char *file, __u64 size, time_t mtime)
{
unsigned long modtime;
long long actual;
unsigned long long actual;
int err;
err = os_file_modtime(file, &modtime);

2
arch/um/include/init.h
View File

@ -122,7 +122,7 @@ extern struct uml_param __uml_setup_start, __uml_setup_end;
#define __exitcall(fn) static exitcall_t __exitcall_##fn __exit_call = fn
#define __init_call __attribute__ ((unused,__section__ (".initcall.init")))
#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init")))
#endif

3
arch/um/include/os.h
View File

@ -179,8 +179,11 @@ extern void os_stop_process(int pid);
extern void os_kill_process(int pid, int reap_child);
extern void os_kill_ptraced_process(int pid, int reap_child);
extern void os_usr1_process(int pid);
extern long os_ptrace_ldt(long pid, long addr, long data);
extern int os_getpid(void);
extern int os_getpgrp(void);
extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
extern void init_new_thread_signals(int altstack);
extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr);

19
arch/um/os-Linux/file.c
View File

@ -272,14 +272,23 @@ int os_connect_socket(char *name)
snprintf(sock.sun_path, sizeof(sock.sun_path), "%s", name);
fd = socket(AF_UNIX, SOCK_STREAM, 0);
if(fd < 0)
return(fd);
if(fd < 0) {
err = -errno;
goto out;
}
err = connect(fd, (struct sockaddr *) &sock, sizeof(sock));
if(err)
return(-errno);
if(err) {
err = -errno;
goto out_close;
}
return(fd);
return fd;
out_close:
close(fd);
out:
return err;
}
void os_close_file(int fd)

16
arch/um/os-Linux/process.c
View File

@ -19,6 +19,7 @@
#include "irq_user.h"
#include "kern_util.h"
#include "longjmp.h"
#include "skas_ptrace.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@ -100,6 +101,21 @@ void os_kill_process(int pid, int reap_child)
}
/* This is here uniquely to have access to the userspace errno, i.e. the one
* used by ptrace in case of error.
*/
long os_ptrace_ldt(long pid, long addr, long data)
{
int ret;
ret = ptrace(PTRACE_LDT, pid, addr, data);
if (ret < 0)
return -errno;
return ret;
}
/* Kill off a ptraced child by all means available. kill it normally first,
* then PTRACE_KILL it, then PTRACE_CONT it in case it's in a run state from
* which it can't exit directly.

9
arch/um/sys-i386/ldt.c
View File

@ -107,7 +107,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
* So we need to switch child's mm into our userspace, then
* later switch back.
*
* Note: I'm unshure: should interrupts be disabled here?
* Note: I'm unsure: should interrupts be disabled here?
*/
if(!current->active_mm || current->active_mm == &init_mm ||
mm_idp != &current->active_mm->context.skas.id)
@ -129,9 +129,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
pid = userspace_pid[cpu];
}
res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op);
if(res)
res = errno;
res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op);
if(proc_mm)
put_cpu();
@ -181,8 +179,7 @@ static long read_ldt_from_host(void __user * ptr, unsigned long bytecount)
*/
cpu = get_cpu();
res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0,
(unsigned long) &ptrace_ldt);
res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt);
put_cpu();
if(res < 0)
goto out;

16
arch/x86_64/Kconfig
View File

@ -354,21 +354,6 @@ config HPET_TIMER
as it is off-chip. You can find the HPET spec at
<http://www.intel.com/hardwaredesign/hpetspec.htm>.
config X86_PM_TIMER
bool "PM timer" if EMBEDDED
depends on ACPI
default y
help
Support the ACPI PM timer for time keeping. This is slow,
but is useful on some chipsets without HPET on systems with more
than one CPU. On a single processor or single socket multi core
system it is normally not required.
When the PM timer is active 64bit vsyscalls are disabled
and should not be enabled (/proc/sys/kernel/vsyscall64 should
not be changed).
The kernel selects the PM timer only as a last resort, so it is
useful to enable just in case.
config HPET_EMULATE_RTC
bool "Provide RTC interrupt"
depends on HPET_TIMER && RTC=y
@ -592,6 +577,7 @@ source "arch/x86_64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

2
arch/x86_64/kernel/Makefile
View File

@ -43,7 +43,7 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0
bootflag-y += ../../i386/kernel/bootflag.o
cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
topology-y += ../../i386/mach-default/topology.o
topology-y += ../../i386/kernel/topology.o
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o
quirks-y += ../../i386/kernel/quirks.o

2
arch/x86_64/kernel/aperture.c
View File

@ -248,7 +248,7 @@ void __init iommu_hole_init(void)
/* Got the aperture from the AGP bridge */
} else if (swiotlb && !valid_agp) {
/* Do nothing */
} else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) ||
} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
force_iommu ||
valid_agp ||
fallback_aper_force) {

9
arch/x86_64/kernel/apic.c
View File

@ -962,12 +962,14 @@ void smp_apic_timer_interrupt(struct pt_regs *regs)
irq_exit();
}
int __initdata unsync_tsc_on_multicluster;
/*
* oem_force_hpet_timer -- force HPET mode for some boxes.
*
* Thus far, the major user of this is IBM's Summit2 series:
*
* Clustered boxes may have unsynced TSC problems if they are
* Some clustered boxes may have unsynced TSC problems if they are
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
@ -977,6 +979,11 @@ __cpuinit int oem_force_hpet_timer(void)
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
/* Only do this check on IBM machines - big Unisys systems
use multiple clusters too, but have synchronized TSC */
if (!unsync_tsc_on_multicluster)
return 0;
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {

48
arch/x86_64/kernel/io_apic.c
View File

@ -50,6 +50,8 @@ static int no_timer_check;
int disable_timer_pin_1 __initdata;
int timer_over_8254 __initdata = 1;
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
@ -251,6 +253,20 @@ static int __init enable_ioapic_setup(char *str)
__setup("noapic", disable_ioapic_setup);
__setup("apic", enable_ioapic_setup);
static int __init setup_disable_8254_timer(char *s)
{
timer_over_8254 = -1;
return 1;
}
static int __init setup_enable_8254_timer(char *s)
{
timer_over_8254 = 2;
return 1;
}
__setup("disable_8254_timer", setup_disable_8254_timer);
__setup("enable_8254_timer", setup_enable_8254_timer);
#include <asm/pci-direct.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
@ -309,27 +325,20 @@ void __init check_ioapic(void)
#endif
/* RED-PEN skip them on mptables too? */
return;
/* This should be actually default, but
for 2.6.16 let's do it for ATI only where
it's really needed. */
case PCI_VENDOR_ID_ATI:
if (apic_runs_main_timer != 0)
break;
#ifdef CONFIG_ACPI
/* Don't do this for laptops right
right now because their timer
doesn't necessarily tick in C2/3 */
if (acpi_fadt.revision >= 3 &&
(acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) {
printk(KERN_INFO
"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n");
break;
}
#endif
if (timer_over_8254 == 1) {
timer_over_8254 = 0;
printk(KERN_INFO
"ATI board detected. Using APIC/PM timer.\n");
apic_runs_main_timer = 1;
nohpet = 1;
"ATI board detected. Disabling timer routing over 8254.\n");
}
return;
}
/* No multi-function device? */
type = read_pci_config_byte(num,slot,func,
PCI_HEADER_TYPE);
@ -1773,6 +1782,8 @@ static inline void unlock_ExtINT_logic(void)
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
*
* FIXME: really need to revamp this for modern platforms only.
*/
static inline void check_timer(void)
{
@ -1795,7 +1806,8 @@ static inline void check_timer(void)
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
enable_8259A_irq(0);
if (timer_over_8254 > 0)
enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
@ -1850,7 +1862,7 @@ static inline void check_timer(void)
}
printk(" failed.\n");
if (nmi_watchdog) {
if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = 0;
}

22
arch/x86_64/kernel/pci-gart.c
View File

@ -228,11 +228,6 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size
int mmu = high;
if (force_iommu)
mmu = 1;
if (no_iommu) {
if (high)
panic("PCI-DMA: high address but no IOMMU.\n");
mmu = 0;
}
return mmu;
}
@ -241,11 +236,6 @@ static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t
u64 mask = *dev->dma_mask;
int high = addr + size >= mask;
int mmu = high;
if (no_iommu) {
if (high)
panic("PCI-DMA: high address but no IOMMU.\n");
mmu = 0;
}
return mmu;
}
@ -310,7 +300,7 @@ void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int di
for (i = 0; i < nents; i++) {
struct scatterlist *s = &sg[i];
if (!s->dma_length)
if (!s->dma_length || !s->length)
break;
dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
}
@ -364,6 +354,7 @@ static int __dma_map_cont(struct scatterlist *sg, int start, int stopat,
BUG_ON(i > start && s->offset);
if (i == start) {
*sout = *s;
sout->dma_address = iommu_bus_base;
sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
sout->dma_length = s->length;
@ -390,6 +381,7 @@ static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat,
{
if (!need) {
BUG_ON(stopat - start != 1);
*sout = sg[start];
sout->dma_length = sg[start].length;
return 0;
}
@ -632,17 +624,13 @@ static int __init pci_iommu_init(void)
(agp_copy_info(agp_bridge, &info) < 0);
#endif
if (swiotlb) {
no_iommu = 1;
if (swiotlb)
return -1;
}
if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
!iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
no_iommu = 1;
no_iommu_init();
printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "

6
arch/x86_64/kernel/setup.c
View File

@ -423,6 +423,12 @@ static __init void parse_cmdline_early (char ** cmdline_p)
else if(!memcmp(from, "elfcorehdr=", 11))
elfcorehdr_addr = memparse(from+11, &from);
#endif
#ifdef CONFIG_HOTPLUG_CPU
else if (!memcmp(from, "additional_cpus=", 16))
setup_additional_cpus(from+16);
#endif
next_char:
c = *(from++);
if (!c)

4
arch/x86_64/kernel/smpboot.c
View File

@ -1152,8 +1152,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
setup_ioapic_dest();
#endif
time_init_gtod();
check_nmi_watchdog();
}
@ -1244,7 +1242,7 @@ void __cpu_die(unsigned int cpu)
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
static __init int setup_additional_cpus(char *s)
__init int setup_additional_cpus(char *s)
{
return get_option(&s, &additional_cpus);
}

22
arch/x86_64/kernel/time.c
View File

@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void);
extern void i8254_timer_resume(void);
extern int using_apic_timer;
static char *time_init_gtod(void);
DEFINE_SPINLOCK(rtc_lock);
DEFINE_SPINLOCK(i8253_lock);
@ -901,6 +903,7 @@ static struct irqaction irq0 = {
void __init time_init(void)
{
char *timename;
char *gtod;
#ifdef HPET_HACK_ENABLE_DANGEROUS
if (!vxtime.hpet_address) {
@ -945,21 +948,19 @@ void __init time_init(void)
timename = "PIT";
}
printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
vxtime.mode = VXTIME_TSC;
gtod = time_init_gtod();
printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
vxtime.mode = VXTIME_TSC;
vxtime.quot = (1000000L << 32) / vxtime_hz;
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
setup_irq(0, &irq0);
set_cyc2ns_scale(cpu_khz);
#ifndef CONFIG_SMP
time_init_gtod();
#endif
}
/*
@ -981,9 +982,9 @@ __cpuinit int unsynchronized_tsc(void)
}
/*
* Decide after all CPUs are booted what mode gettimeofday should use.
* Decide what mode gettimeofday should use.
*/
void __init time_init_gtod(void)
__init static char *time_init_gtod(void)
{
char *timetype;
@ -1011,8 +1012,7 @@ void __init time_init_gtod(void)
timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}
printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
return timetype;
}
__setup("report_lost_ticks", time_setup);

10
drivers/acpi/Kconfig
View File

@ -247,7 +247,7 @@ config ACPI_CUSTOM_DSDT_FILE
Enter the full path name to the file wich includes the AmlCode declaration.
config ACPI_BLACKLIST_YEAR
int "Disable ACPI for systems before Jan 1st this year" if X86
int "Disable ACPI for systems before Jan 1st this year" if X86_32
default 0
help
enter a 4-digit year, eg. 2001 to disable ACPI by default
@ -285,9 +285,8 @@ config ACPI_SYSTEM
dump your ACPI DSDT table using /proc/acpi/dsdt.
config X86_PM_TIMER
bool "Power Management Timer Support"
bool "Power Management Timer Support" if EMBEDDED
depends on X86
depends on !X86_64
default y
help
The Power Management Timer is available on all ACPI-capable,
@ -298,9 +297,8 @@ config X86_PM_TIMER
voltage scaling, unlike the commonly used Time Stamp Counter
(TSC) timing source.
So, if you see messages like 'Losing too many ticks!' in the
kernel logs, and/or you are using this on a notebook which
does not yet have an HPET, you should say "Y" here.
You should nearly always say Y here because many modern
systems require this timer.
config ACPI_CONTAINER
tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"

8
drivers/char/hvc_console.c
View File

@ -335,6 +335,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
} /* else count == 0 */
tty->driver_data = hp;
tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
hp->tty = tty;
/* Save for request_irq outside of spin_lock. */
irq = hp->irq;
@ -633,9 +635,6 @@ static int hvc_poll(struct hvc_struct *hp)
tty_insert_flip_char(tty, buf[i], 0);
}
if (count)
tty_schedule_flip(tty);
/*
* Account for the total amount read in one loop, and if above
* 64 bytes, we do a quick schedule loop to let the tty grok
@ -656,6 +655,9 @@ static int hvc_poll(struct hvc_struct *hp)
bail:
spin_unlock_irqrestore(&hp->lock, flags);
if (read_total)
tty_flip_buffer_push(tty);
return poll_mask;
}

12
drivers/char/sx.c
View File

@ -2173,15 +2173,17 @@ static int probe_si (struct sx_board *board)
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit ();
return 0;
}
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
}
}
/* Now we're pretty much convinced that there is an SI board here,
@ -2192,15 +2194,17 @@ static int probe_si (struct sx_board *board)
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit();
return 0;
}
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
}
}
printheader ();

116
drivers/ieee1394/sbp2.c
View File

@ -137,15 +137,15 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)"
/*
* SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
* if your sbp2 device is not properly handling the SCSI inquiry command.
* This hack makes the inquiry look more like a typical MS Windows
* inquiry.
* This hack makes the inquiry look more like a typical MS Windows inquiry
* by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
*
* If force_inquiry_hack=1 is required for your device to work,
* please submit the logged sbp2_firmware_revision value of this device to
* the linux1394-devel mailing list.
*/
static int force_inquiry_hack;
module_param(force_inquiry_hack, int, 0444);
module_param(force_inquiry_hack, int, 0644);
MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
/*
@ -264,18 +264,17 @@ static struct hpsb_protocol_driver sbp2_driver = {
},
};
/* List of device firmware's that require a forced 36 byte inquiry. */
/*
* List of device firmwares that require the inquiry hack.
* Yields a few false positives but did not break other devices so far.
*/
static u32 sbp2_broken_inquiry_list[] = {
0x00002800, /* Stefan Richter <richtest@bauwesen.tu-cottbus.de> */
0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
/* DViCO Momobay CX-1 */
0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
/* QPS Fire DVDBurner */
};
#define NUM_BROKEN_INQUIRY_DEVS \
(sizeof(sbp2_broken_inquiry_list)/sizeof(*sbp2_broken_inquiry_list))
/**************************************
* General utility functions
**************************************/
@ -643,9 +642,15 @@ static int sbp2_remove(struct device *dev)
if (!scsi_id)
return 0;
/* Trigger shutdown functions in scsi's highlevel. */
if (scsi_id->scsi_host)
if (scsi_id->scsi_host) {
/* Get rid of enqueued commands if there is no chance to
* send them. */
if (!sbp2util_node_is_available(scsi_id))
sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
/* scsi_remove_device() will trigger shutdown functions of SCSI
* highlevel drivers which would deadlock if blocked. */
scsi_unblock_requests(scsi_id->scsi_host);
}
sdev = scsi_id->sdev;
if (sdev) {
scsi_id->sdev = NULL;
@ -742,11 +747,6 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
hi->host = ud->ne->host;
INIT_LIST_HEAD(&hi->scsi_ids);
/* Register our sbp2 status address space... */
hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_ops,
SBP2_STATUS_FIFO_ADDRESS,
SBP2_STATUS_FIFO_ADDRESS +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(SBP2_MAX_UDS_PER_NODE+1));
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/* Handle data movement if physical dma is not
* enabled/supportedon host controller */
@ -759,6 +759,18 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
/* Register the status FIFO address range. We could use the same FIFO
* for targets at different nodes. However we need different FIFOs per
* target in order to support multi-unit devices. */
scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
~0ULL, ~0ULL);
if (!scsi_id->status_fifo_addr) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
}
/* Register our host with the SCSI stack. */
scsi_host = scsi_host_alloc(&scsi_driver_template,
sizeof(unsigned long));
@ -997,6 +1009,10 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
SBP2_DMA_FREE("single query logins data");
}
if (scsi_id->status_fifo_addr)
hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
scsi_id->status_fifo_addr);
scsi_id->ud->device.driver_data = NULL;
SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id);
@ -1075,11 +1091,10 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized");
scsi_id->query_logins_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->query_logins_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
SBP2_STATUS_FIFO_ADDRESS_HI);
SBP2_DEBUG("sbp2_query_logins: status FIFO initialized");
scsi_id->query_logins_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->query_logins_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
@ -1184,11 +1199,10 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized");
scsi_id->login_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->login_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
SBP2_STATUS_FIFO_ADDRESS_HI);
SBP2_DEBUG("sbp2_login_device: status FIFO initialized");
scsi_id->login_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->login_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@ -1301,10 +1315,10 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->logout_orb->reserved5 = 0x0;
scsi_id->logout_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->logout_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
SBP2_STATUS_FIFO_ADDRESS_HI);
scsi_id->logout_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->logout_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@ -1366,10 +1380,10 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->reconnect_orb->reserved5 = 0x0;
scsi_id->reconnect_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->reconnect_orb->status_FIFO_hi =
(ORB_SET_NODE_ID(hi->host->node_id) | SBP2_STATUS_FIFO_ADDRESS_HI);
scsi_id->reconnect_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->reconnect_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@ -1560,7 +1574,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
/* Check for a blacklisted set of devices that require us to force
* a 36 byte host inquiry. This can be overriden as a module param
* (to force all hosts). */
for (i = 0; i < NUM_BROKEN_INQUIRY_DEVS; i++) {
for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
if ((firmware_revision & 0xffff00) ==
sbp2_broken_inquiry_list[i]) {
SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
@ -2006,18 +2020,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
return -EIO;
}
/*
* The scsi stack sends down a request_bufflen which does not match the
* length field in the scsi cdb. This causes some sbp2 devices to
* reject this inquiry command. Fix the request_bufflen.
*/
if (*cmd == INQUIRY) {
if (force_inquiry_hack || scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK)
request_bufflen = cmd[4] = 0x24;
else
request_bufflen = cmd[4];
}
/*
* Now actually fill in the comamnd orb and sbp2 s/g list
*/
@ -2106,7 +2108,6 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
{
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
u32 id;
struct scsi_cmnd *SCpnt = NULL;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
@ -2129,12 +2130,12 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
}
/*
* Find our scsi_id structure by looking at the status fifo address written to by
* the sbp2 device.
* Find our scsi_id structure by looking at the status fifo address
* written to by the sbp2 device.
*/
id = SBP2_STATUS_FIFO_OFFSET_TO_ENTRY((u32)(addr - SBP2_STATUS_FIFO_ADDRESS));
list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) {
if (scsi_id_tmp->ne->nodeid == nodeid && scsi_id_tmp->ud->id == id) {
if (scsi_id_tmp->ne->nodeid == nodeid &&
scsi_id_tmp->status_fifo_addr == addr) {
scsi_id = scsi_id_tmp;
break;
}
@ -2475,7 +2476,16 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
{
((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev;
struct scsi_id_instance_data *scsi_id =
(struct scsi_id_instance_data *)sdev->host->hostdata[0];
scsi_id->sdev = sdev;
if (force_inquiry_hack ||
scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
sdev->inquiry_len = 36;
sdev->skip_ms_page_8 = 1;
}
return 0;
}

64
drivers/ieee1394/sbp2.h
View File

@ -33,15 +33,17 @@
#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31)
#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16)
#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id))
#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff)
#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
struct sbp2_command_orb {
volatile u32 next_ORB_hi;
@ -76,8 +78,8 @@ struct sbp2_login_orb {
u32 login_response_lo;
u32 lun_misc;
u32 passwd_resp_lengths;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff)
@ -102,8 +104,8 @@ struct sbp2_query_logins_orb {
u32 query_response_lo;
u32 lun_misc;
u32 reserved_resp_length;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff)
@ -123,8 +125,8 @@ struct sbp2_reconnect_orb {
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
struct sbp2_logout_orb {
@ -134,8 +136,8 @@ struct sbp2_logout_orb {
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff)
@ -195,30 +197,6 @@ struct sbp2_status_block {
* Miscellaneous SBP2 related config rom defines
*/
/* The status fifo address definition below is used as a base for each
* node, which a chunk seperately assigned to each unit directory in the
* node. For example, 0xfffe00000000ULL is used for the first sbp2 device
* detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node
* 0, and so on.
*
* Note: We could use a single status fifo address for all sbp2 devices,
* and figure out which sbp2 device the status belongs to by looking at
* the source node id of the status write... but, using separate addresses
* for each sbp2 unit directory allows for better code and the ability to
* support multiple luns within a single 1394 node.
*
* Also note that we choose the address range below as it is a region
* specified for write posting, where the ohci controller will
* automatically send an ack_complete when the status is written by the
* sbp2 device... saving a split transaction. =)
*/
#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL
#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe
#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0
#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5)
#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5)
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
#define SBP2_CSR_OFFSET_KEY 0x54
#define SBP2_UNIT_SPEC_ID_KEY 0x12
@ -258,7 +236,6 @@ struct sbp2_status_block {
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#define SBP2_MAX_CMDS 8 /* This should be safe */
@ -337,6 +314,11 @@ struct scsi_id_instance_data {
u32 sbp2_lun;
u32 sbp2_firmware_revision;
/*
* Address for the device to write status blocks to
*/
u64 status_fifo_addr;
/*
* Variable used for logins, reconnects, logouts, query logins
*/

8
drivers/md/dm.c
View File

@ -849,10 +849,16 @@ static struct mapped_device *alloc_dev(unsigned int minor, int persistent)
static void free_dev(struct mapped_device *md)
{
free_minor(md->disk->first_minor);
unsigned int minor = md->disk->first_minor;
if (md->suspended_bdev) {
thaw_bdev(md->suspended_bdev, NULL);
bdput(md->suspended_bdev);
}
mempool_destroy(md->tio_pool);
mempool_destroy(md->io_pool);
del_gendisk(md->disk);
free_minor(minor);
put_disk(md->disk);
blk_put_queue(md->queue);
kfree(md);

1
drivers/mtd/chips/cfi_cmdset_0001.c
View File

@ -408,6 +408,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
cfi->chips[i].ref_point_counter = 0;
init_waitqueue_head(&(cfi->chips[i].wq));
}
map->fldrv = &cfi_intelext_chipdrv;

2
drivers/net/ifb.c
View File

@ -57,7 +57,7 @@ struct ifb_private {
struct sk_buff_head tq;
};
static int numifbs = 1;
static int numifbs = 2;
static void ri_tasklet(unsigned long dev);
static int ifb_xmit(struct sk_buff *skb, struct net_device *dev);

189
drivers/net/r8169.c
View File

@ -287,6 +287,20 @@ enum RTL8169_register_content {
TxInterFrameGapShift = 24,
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
/* Config1 register p.24 */
PMEnable = (1 << 0), /* Power Management Enable */
/* Config3 register p.25 */
MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
/* Config5 register p.27 */
BWF = (1 << 6), /* Accept Broadcast wakeup frame */
MWF = (1 << 5), /* Accept Multicast wakeup frame */
UWF = (1 << 4), /* Accept Unicast wakeup frame */
LanWake = (1 << 1), /* LanWake enable/disable */
PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
/* TBICSR p.28 */
TBIReset = 0x80000000,
TBILoopback = 0x40000000,
@ -433,6 +447,7 @@ struct rtl8169_private {
unsigned int (*phy_reset_pending)(void __iomem *);
unsigned int (*link_ok)(void __iomem *);
struct work_struct task;
unsigned wol_enabled : 1;
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@ -607,6 +622,80 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex)
*duplex = p->duplex;
}
static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
u8 options;
wol->wolopts = 0;
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
wol->supported = WAKE_ANY;
spin_lock_irq(&tp->lock);
options = RTL_R8(Config1);
if (!(options & PMEnable))
goto out_unlock;
options = RTL_R8(Config3);
if (options & LinkUp)
wol->wolopts |= WAKE_PHY;
if (options & MagicPacket)
wol->wolopts |= WAKE_MAGIC;
options = RTL_R8(Config5);
if (options & UWF)
wol->wolopts |= WAKE_UCAST;
if (options & BWF)
wol->wolopts |= WAKE_BCAST;
if (options & MWF)
wol->wolopts |= WAKE_MCAST;
out_unlock:
spin_unlock_irq(&tp->lock);
}
static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
int i;
static struct {
u32 opt;
u16 reg;
u8 mask;
} cfg[] = {
{ WAKE_ANY, Config1, PMEnable },
{ WAKE_PHY, Config3, LinkUp },
{ WAKE_MAGIC, Config3, MagicPacket },
{ WAKE_UCAST, Config5, UWF },
{ WAKE_BCAST, Config5, BWF },
{ WAKE_MCAST, Config5, MWF },
{ WAKE_ANY, Config5, LanWake }
};
spin_lock_irq(&tp->lock);
RTL_W8(Cfg9346, Cfg9346_Unlock);
for (i = 0; i < ARRAY_SIZE(cfg); i++) {
u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
if (wol->wolopts & cfg[i].opt)
options |= cfg[i].mask;
RTL_W8(cfg[i].reg, options);
}
RTL_W8(Cfg9346, Cfg9346_Lock);
tp->wol_enabled = (wol->wolopts) ? 1 : 0;
spin_unlock_irq(&tp->lock);
return 0;
}
static void rtl8169_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
@ -1025,6 +1114,8 @@ static struct ethtool_ops rtl8169_ethtool_ops = {
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
.get_regs = rtl8169_get_regs,
.get_wol = rtl8169_get_wol,
.set_wol = rtl8169_set_wol,
.get_strings = rtl8169_get_strings,
.get_stats_count = rtl8169_get_stats_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
@ -1442,6 +1533,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
}
tp->chipset = i;
RTL_W8(Cfg9346, Cfg9346_Unlock);
RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
RTL_W8(Cfg9346, Cfg9346_Lock);
*ioaddr_out = ioaddr;
*dev_out = dev;
out:
@ -1612,49 +1708,6 @@ rtl8169_remove_one(struct pci_dev *pdev)
pci_set_drvdata(pdev, NULL);
}
#ifdef CONFIG_PM
static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
if (!netif_running(dev))
return 0;
netif_device_detach(dev);
netif_stop_queue(dev);
spin_lock_irqsave(&tp->lock, flags);
/* Disable interrupts, stop Rx and Tx */
RTL_W16(IntrMask, 0);
RTL_W8(ChipCmd, 0);
/* Update the error counts. */
tp->stats.rx_missed_errors += RTL_R32(RxMissed);
RTL_W32(RxMissed, 0);
spin_unlock_irqrestore(&tp->lock, flags);
return 0;
}
static int rtl8169_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
if (!netif_running(dev))
return 0;
netif_device_attach(dev);
rtl8169_hw_start(dev);
return 0;
}
#endif /* CONFIG_PM */
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
struct net_device *dev)
{
@ -2700,6 +2753,56 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
return &tp->stats;
}
#ifdef CONFIG_PM
static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
if (!netif_running(dev))
goto out;
netif_device_detach(dev);
netif_stop_queue(dev);
spin_lock_irq(&tp->lock);
rtl8169_asic_down(ioaddr);
tp->stats.rx_missed_errors += RTL_R32(RxMissed);
RTL_W32(RxMissed, 0);
spin_unlock_irq(&tp->lock);
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
out:
return 0;
}
static int rtl8169_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
if (!netif_running(dev))
goto out;
netif_device_attach(dev);
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D0, 0);
rtl8169_schedule_work(dev, rtl8169_reset_task);
out:
return 0;
}
#endif /* CONFIG_PM */
static struct pci_driver rtl8169_pci_driver = {
.name = MODULENAME,
.id_table = rtl8169_pci_tbl,

75
drivers/net/skge.c
View File

@ -879,13 +879,12 @@ static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val)
int i;
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
xm_read16(hw, port, XM_PHY_DATA);
*val = xm_read16(hw, port, XM_PHY_DATA);
/* Need to wait for external PHY */
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY)
goto ready;
udelay(1);
}
return -ETIMEDOUT;
@ -918,7 +917,12 @@ static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
ready:
xm_write16(hw, port, XM_PHY_DATA, val);
return 0;
for (i = 0; i < PHY_RETRIES; i++) {
if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
return 0;
udelay(1);
}
return -ETIMEDOUT;
}
static void genesis_init(struct skge_hw *hw)
@ -1168,13 +1172,17 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
u32 r;
const u8 zero[6] = { 0 };
/* Clear MIB counters */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
for (i = 0; i < 10; i++) {
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
MFF_SET_MAC_RST);
if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST)
goto reset_ok;
udelay(1);
}
printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
reset_ok:
/* Unreset the XMAC. */
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
@ -1191,7 +1199,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
r |= GP_DIR_2|GP_IO_2;
skge_write32(hw, B2_GP_IO, r);
skge_read32(hw, B2_GP_IO);
/* Enable GMII interface */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@ -1205,6 +1213,13 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
for (i = 1; i < 16; i++)
xm_outaddr(hw, port, XM_EXM(i), zero);
/* Clear MIB counters */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* configure Rx High Water Mark (XM_RX_HI_WM) */
xm_write16(hw, port, XM_RX_HI_WM, 1450);
@ -2170,8 +2185,10 @@ static int skge_up(struct net_device *dev)
skge->tx_avail = skge->tx_ring.count - 1;
/* Enable IRQ from port */
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= portirqmask[port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
/* Initialize MAC */
spin_lock_bh(&hw->phy_lock);
@ -2229,8 +2246,10 @@ static int skge_down(struct net_device *dev)
else
yukon_stop(skge);
spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
@ -2678,8 +2697,7 @@ static int skge_poll(struct net_device *dev, int *budget)
/* restart receiver */
wmb();
skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
CSR_START | CSR_IRQ_CL_F);
skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
*budget -= work_done;
dev->quota -= work_done;
@ -2687,10 +2705,11 @@ static int skge_poll(struct net_device *dev, int *budget)
if (work_done >= to_do)
return 1; /* not done */
netif_rx_complete(dev);
hw->intr_mask |= portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
skge_read32(hw, B0_IMSK);
spin_lock_irq(&hw->hw_lock);
__netif_rx_complete(dev);
hw->intr_mask |= portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
return 0;
}
@ -2850,18 +2869,10 @@ static void skge_extirq(unsigned long data)
}
spin_unlock(&hw->phy_lock);
local_irq_disable();
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
local_irq_enable();
}
static inline void skge_wakeup(struct net_device *dev)
{
struct skge_port *skge = netdev_priv(dev);
prefetch(skge->rx_ring.to_clean);
netif_rx_schedule(dev);
spin_unlock_irq(&hw->hw_lock);
}
static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
@ -2872,15 +2883,17 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0 || status == ~0) /* hotplug or shared irq */
return IRQ_NONE;
status &= hw->intr_mask;
spin_lock(&hw->hw_lock);
if (status & IS_R1_F) {
skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R1_F;
skge_wakeup(hw->dev[0]);
netif_rx_schedule(hw->dev[0]);
}
if (status & IS_R2_F) {
skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R2_F;
skge_wakeup(hw->dev[1]);
netif_rx_schedule(hw->dev[1]);
}
if (status & IS_XA1_F)
@ -2922,6 +2935,7 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
}
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@ -3290,6 +3304,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
hw->pdev = pdev;
spin_lock_init(&hw->phy_lock);
spin_lock_init(&hw->hw_lock);
tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);

1
drivers/net/skge.h
View File

@ -2402,6 +2402,7 @@ struct skge_hw {
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
spinlock_t hw_lock;
};
enum {

177
drivers/net/sky2.c
View File

@ -195,11 +195,11 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
pr_debug("sky2_set_power_state %d\n", state);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
(power_control & PCI_PM_CAP_PME_D3cold);
pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
power_control |= PCI_PM_CTRL_PME_STATUS;
power_control &= ~(PCI_PM_CTRL_STATE_MASK);
@ -223,7 +223,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
/* Turn off phy power saving */
pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
/* looks like this XL is back asswards .. */
@ -232,18 +232,28 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
if (hw->ports > 1)
reg1 |= PCI_Y2_PHY2_COMA;
}
pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
reg1 &= P_ASPM_CONTROL_MSK;
sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
sky2_pci_write32(hw, PCI_DEV_REG5, 0);
}
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
break;
case PCI_D3hot:
case PCI_D3cold:
/* Turn on phy power saving */
pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
else
reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@ -265,7 +275,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
ret = -1;
}
pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
return ret;
}
@ -463,16 +473,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
/* apply fixes in PHY AFE */
gm_phy_write(hw, port, 22, 255);
/* increase differential signal amplitude in 10BASE-T */
gm_phy_write(hw, port, 24, 0xaa99);
gm_phy_write(hw, port, 23, 0x2011);
/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
gm_phy_write(hw, port, 24, 0xa204);
gm_phy_write(hw, port, 23, 0x2002);
/* set page register to 0 */
gm_phy_write(hw, port, 22, 0);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
if (ledover)
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
if (ledover)
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
/* Enable phy interrupt on auto-negotiation complete (or link up) */
if (sky2->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
@ -953,6 +978,12 @@ static int sky2_rx_start(struct sky2_port *sky2)
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
/* MAC Rx RAM Read is controlled by hardware */
sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
}
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
rx_set_checksum(sky2);
@ -1035,9 +1066,10 @@ static int sky2_up(struct net_device *dev)
RB_RST_SET);
sky2_qset(hw, txqaddr[port]);
if (hw->chip_id == CHIP_ID_YUKON_EC_U)
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
/* Set almost empty threshold */
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
@ -1047,8 +1079,10 @@ static int sky2_up(struct net_device *dev)
goto err_out;
/* Enable interrupts from phy/mac for port */
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
return 0;
err_out:
@ -1348,10 +1382,10 @@ static int sky2_down(struct net_device *dev)
netif_stop_queue(dev);
/* Disable port IRQ */
local_irq_disable();
spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
local_irq_enable();
spin_unlock_irq(&hw->hw_lock);
flush_scheduled_work();
@ -1633,10 +1667,10 @@ static void sky2_phy_task(void *arg)
out:
up(&sky2->phy_sema);
local_irq_disable();
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
local_irq_enable();
spin_unlock_irq(&hw->hw_lock);
}
@ -1863,6 +1897,17 @@ static int sky2_poll(struct net_device *dev0, int *budget)
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
/*
* Kick the STAT_LEV_TIMER_CTRL timer.
* This fixes my hangs on Yukon-EC (0xb6) rev 1.
* The if clause is there to start the timer only if it has been
* configured correctly and not been disabled via ethtool.
*/
if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) {
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
}
hwidx = sky2_read16(hw, STAT_PUT_IDX);
BUG_ON(hwidx >= STATUS_RING_SIZE);
rmb();
@ -1945,16 +1990,19 @@ exit_loop:
sky2_tx_check(hw, 0, tx_done[0]);
sky2_tx_check(hw, 1, tx_done[1]);
if (likely(work_done < to_do)) {
/* need to restart TX timer */
if (is_ec_a1(hw)) {
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
if (likely(work_done < to_do)) {
spin_lock_irq(&hw->hw_lock);
__netif_rx_complete(dev0);
netif_rx_complete(dev0);
hw->intr_mask |= Y2_IS_STAT_BMU;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
return 0;
} else {
*budget -= work_done;
@ -2017,13 +2065,13 @@ static void sky2_hw_intr(struct sky2_hw *hw)
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
pci_name(hw->pdev), pci_err);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_write_config_word(hw->pdev, PCI_STATUS,
sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
@ -2032,7 +2080,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
/* PCI-Express uncorrectable Error occurred */
u32 pex_err;
pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
@ -2040,7 +2088,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
/* clear the interrupt */
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
0xffffffffUL);
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
@ -2086,6 +2134,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
schedule_work(&sky2->phy_task);
}
@ -2099,6 +2148,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0 || status == ~0)
return IRQ_NONE;
spin_lock(&hw->hw_lock);
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
@ -2127,7 +2177,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
sky2_write32(hw, B0_Y2_SP_ICR, 2);
sky2_read32(hw, B0_IMSK);
spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@ -2170,7 +2220,7 @@ static int sky2_reset(struct sky2_hw *hw)
{
u16 status;
u8 t8, pmd_type;
int i, err;
int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
@ -2192,25 +2242,18 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */
err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
if (err)
goto pci_err;
status = sky2_pci_read16(hw, PCI_STATUS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
err = pci_write_config_word(hw->pdev, PCI_STATUS,
status | PCI_STATUS_ERROR_BITS);
if (err)
goto pci_err;
sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
/* clear any PEX errors */
if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
0xffffffffUL);
if (err)
goto pci_err;
}
if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
@ -2309,8 +2352,7 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7));
}
/* enable status unit */
@ -2321,14 +2363,6 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
return 0;
pci_err:
/* This is to catch a BIOS bug workaround where
* mmconfig table doesn't have other buses.
*/
printk(KERN_ERR PFX "%s: can't access PCI config space\n",
pci_name(hw->pdev));
return err;
}
static u32 sky2_supported_modes(const struct sky2_hw *hw)
@ -2852,11 +2886,11 @@ static int sky2_set_coalesce(struct net_device *dev,
(ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
return -EINVAL;
if (ecmd->tx_max_coalesced_frames > 0xffff)
if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
return -EINVAL;
if (ecmd->rx_max_coalesced_frames > 0xff)
if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
return -EINVAL;
if (ecmd->rx_max_coalesced_frames_irq > 0xff)
if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
return -EINVAL;
if (ecmd->tx_coalesce_usecs == 0)
@ -3198,17 +3232,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
}
}
#ifdef __BIG_ENDIAN
/* byte swap descriptors in hardware */
{
u32 reg;
pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
reg |= PCI_REV_DESC;
pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
}
#endif
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
@ -3226,6 +3249,18 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out_free_hw;
}
hw->pm_cap = pm_cap;
spin_lock_init(&hw->hw_lock);
#ifdef __BIG_ENDIAN
/* byte swap descriptors in hardware */
{
u32 reg;
reg = sky2_pci_read32(hw, PCI_DEV_REG2);
reg |= PCI_REV_DESC;
sky2_pci_write32(hw, PCI_DEV_REG2, reg);
}
#endif
/* ring for status responses */
hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,

83
drivers/net/sky2.h
View File

@ -5,14 +5,22 @@
#define _SKY2_H
/* PCI config registers */
#define PCI_DEV_REG1 0x40
#define PCI_DEV_REG2 0x44
#define PCI_DEV_STATUS 0x7c
#define PCI_OS_PCI_X (1<<26)
enum {
PCI_DEV_REG1 = 0x40,
PCI_DEV_REG2 = 0x44,
PCI_DEV_STATUS = 0x7c,
PCI_DEV_REG3 = 0x80,
PCI_DEV_REG4 = 0x84,
PCI_DEV_REG5 = 0x88,
};
#define PEX_LNK_STAT 0xf2
#define PEX_UNC_ERR_STAT 0x104
#define PEX_DEV_CTRL 0xe8
enum {
PEX_DEV_CAP = 0xe4,
PEX_DEV_CTRL = 0xe8,
PEX_DEV_STA = 0xea,
PEX_LNK_STAT = 0xf2,
PEX_UNC_ERR_STAT= 0x104,
};
/* Yukon-2 */
enum pci_dev_reg_1 {
@ -37,6 +45,25 @@ enum pci_dev_reg_2 {
PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
};
/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
enum pci_dev_reg_4 {
/* (Link Training & Status State Machine) */
P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */
/* (Active State Power Management) */
P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */
P_ASPM_GPHY_LINK_DOWN = 1<<14, /* GPHY Link Down (A1 only) */
P_ASPM_INT_FIFO_EMPTY = 1<<13, /* Internal FIFO Empty (A1 only) */
P_ASPM_CLKRUN_REQUEST = 1<<12, /* CLKRUN Request (A1 only) */
P_ASPM_FORCE_CLKREQ_ENA = 1<<4, /* Force CLKREQ Enable (A1b only) */
P_ASPM_CLKREQ_PAD_CTL = 1<<3, /* CLKREQ PAD Control (A1 only) */
P_ASPM_A1_MODE_SELECT = 1<<2, /* A1 Mode Select (A1 only) */
P_CLK_GATE_PEX_UNIT_ENA = 1<<1, /* Enable Gate PEX Unit Clock */
P_CLK_GATE_ROOT_COR_ENA = 1<<0, /* Enable Gate Root Core Clock */
P_ASPM_CONTROL_MSK = P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN
| P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
};
#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
PCI_STATUS_SIG_SYSTEM_ERROR | \
@ -507,6 +534,16 @@ enum {
};
#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
/* Q_F 32 bit Flag Register */
enum {
F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */
F_EMPTY = 1<<27, /* Tx FIFO: empty flag */
F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */
F_WM_REACHED = 1<<25, /* Watermark reached */
F_M_RX_RAM_DIS = 1<<24, /* MAC Rx RAM Read Port disable */
F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */
F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */
};
/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
enum {
@ -909,10 +946,12 @@ enum {
PHY_BCOM_ID1_C0 = 0x6044,
PHY_BCOM_ID1_C5 = 0x6047,
PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE (PHY 88E3082 Rev.A1) */
PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU (PHY 88E1149 Rev.B2?) */
};
/* Advertisement register bits */
@ -1837,8 +1876,9 @@ struct sky2_port {
struct sky2_hw {
void __iomem *regs;
struct pci_dev *pdev;
u32 intr_mask;
struct net_device *dev[2];
spinlock_t hw_lock;
u32 intr_mask;
int pm_cap;
int msi;
@ -1912,4 +1952,25 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg,
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
/* PCI config space access */
static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
{
return sky2_read32(hw, Y2_CFG_SPC + reg);
}
static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
{
return sky2_read16(hw, Y2_CFG_SPC + reg);
}
static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
{
sky2_write32(hw, Y2_CFG_SPC + reg, val);
}
static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
{
sky2_write16(hw, Y2_CFG_SPC + reg, val);
}
#endif

2
drivers/net/tlan.c
View File

@ -536,6 +536,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
u16 device_id;
int reg, rc = -ENODEV;
#ifdef CONFIG_PCI
if (pdev) {
rc = pci_enable_device(pdev);
if (rc)
@ -547,6 +548,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
goto err_out;
}
}
#endif /* CONFIG_PCI */
dev = alloc_etherdev(sizeof(TLanPrivateInfo));
if (dev == NULL) {

20
drivers/scsi/sd.c
View File

@ -89,6 +89,11 @@
#define SD_MAX_RETRIES 5
#define SD_PASSTHROUGH_RETRIES 1
/*
* Size of the initial data buffer for mode and read capacity data
*/
#define SD_BUF_SIZE 512
static void scsi_disk_release(struct kref *kref);
struct scsi_disk {
@ -1239,7 +1244,7 @@ sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
/*
* read write protect setting, if possible - called only in sd_revalidate_disk()
* called with buffer of length 512
* called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
@ -1297,7 +1302,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
/*
* sd_read_cache_type - called only from sd_revalidate_disk()
* called with buffer of length 512
* called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
@ -1342,6 +1347,8 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
/* Take headers and block descriptors into account */
len += data.header_length + data.block_descriptor_length;
if (len > SD_BUF_SIZE)
goto bad_sense;
/* Get the data */
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
@ -1354,6 +1361,12 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
int ct = 0;
int offset = data.header_length + data.block_descriptor_length;
if (offset >= SD_BUF_SIZE - 2) {
printk(KERN_ERR "%s: malformed MODE SENSE response",
diskname);
goto defaults;
}
if ((buffer[offset] & 0x3f) != modepage) {
printk(KERN_ERR "%s: got wrong page\n", diskname);
goto defaults;
@ -1398,6 +1411,7 @@ defaults:
diskname);
sdkp->WCE = 0;
sdkp->RCD = 0;
sdkp->DPOFUA = 0;
}
/**
@ -1421,7 +1435,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
if (!scsi_device_online(sdp))
goto out;
buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA);
buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
if (!buffer) {
printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
"failure.\n");

6
drivers/serial/8250.c
View File

@ -2326,6 +2326,12 @@ static struct uart_driver serial8250_reg = {
.cons = SERIAL8250_CONSOLE,
};
/*
* early_serial_setup - early registration for 8250 ports
*
* Setup an 8250 port structure prior to console initialisation. Use
* after console initialisation will cause undefined behaviour.
*/
int __init early_serial_setup(struct uart_port *port)
{
if (port->line >= ARRAY_SIZE(serial8250_ports))

2
drivers/video/Kconfig
View File

@ -520,7 +520,7 @@ config FB_GBE
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
default 8
default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.

21
drivers/video/asiliantfb.c
View File

@ -322,32 +322,29 @@ static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
writeb(green, mmio_base + 0x791);
writeb(blue, mmio_base + 0x791);
switch(p->var.bits_per_pixel) {
case 15:
if (regno < 16) {
if (regno < 16) {
switch(p->var.red.offset) {
case 10: /* RGB 555 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 7) |
((green & 0xf8) << 2) |
((blue & 0xf8) >> 3);
}
break;
case 16:
if (regno < 16) {
break;
case 11: /* RGB 565 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 8) |
((green & 0xfc) << 3) |
((blue & 0xf8) >> 3);
}
break;
case 24:
if (regno < 24) {
break;
case 16: /* RGB 888 */
((u32 *)(p->pseudo_palette))[regno] =
(red << 16) |
(green << 8) |
(blue);
break;
}
break;
}
return 0;
}

3
drivers/video/au1100fb.c
View File

@ -49,6 +49,7 @@
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
@ -406,7 +407,7 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
vma->vm_flags |= VM_IO;
if (io_remap_page_range(vma, vma->vm_start, off,
if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
return -EAGAIN;

67
drivers/video/console/vgacon.c
View File

@ -509,57 +509,60 @@ static int vgacon_doresize(struct vc_data *c,
{
unsigned long flags;
unsigned int scanlines = height * c->vc_font.height;
u8 scanlines_lo, r7, vsync_end, mode, max_scan;
u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
spin_lock_irqsave(&vga_lock, flags);
outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
max_scan = inb_p(vga_video_port_val);
if (max_scan & 0x80)
scanlines <<= 1;
vgacon_xres = width * VGA_FONTWIDTH;
vgacon_yres = height * c->vc_font.height;
outb_p(VGA_CRTC_MODE, vga_video_port_reg);
mode = inb_p(vga_video_port_val);
if (vga_video_type >= VIDEO_TYPE_VGAC) {
outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
max_scan = inb_p(vga_video_port_val);
if (mode & 0x04)
scanlines >>= 1;
if (max_scan & 0x80)
scanlines <<= 1;
scanlines -= 1;
scanlines_lo = scanlines & 0xff;
outb_p(VGA_CRTC_MODE, vga_video_port_reg);
mode = inb_p(vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
r7 = inb_p(vga_video_port_val) & ~0x42;
if (mode & 0x04)
scanlines >>= 1;
if (scanlines & 0x100)
r7 |= 0x02;
if (scanlines & 0x200)
r7 |= 0x40;
scanlines -= 1;
scanlines_lo = scanlines & 0xff;
/* deprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
vsync_end = inb_p(vga_video_port_val);
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end & ~0x80, vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
r7 = inb_p(vga_video_port_val) & ~0x42;
if (scanlines & 0x100)
r7 |= 0x02;
if (scanlines & 0x200)
r7 |= 0x40;
/* deprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
vsync_end = inb_p(vga_video_port_val);
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end & ~0x80, vga_video_port_val);
}
outb_p(VGA_CRTC_H_DISP, vga_video_port_reg);
outb_p(width - 1, vga_video_port_val);
outb_p(VGA_CRTC_OFFSET, vga_video_port_reg);
outb_p(width >> 1, vga_video_port_val);
outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
outb_p(scanlines_lo, vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
outb_p(r7,vga_video_port_val);
if (vga_video_type >= VIDEO_TYPE_VGAC) {
outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
outb_p(scanlines_lo, vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
outb_p(r7,vga_video_port_val);
/* reprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end, vga_video_port_val);
/* reprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end, vga_video_port_val);
}
spin_unlock_irqrestore(&vga_lock, flags);
return 0;
}

3
drivers/video/gbefb.c
View File

@ -656,12 +656,15 @@ static int gbefb_set_par(struct fb_info *info)
switch (bytesPerPixel) {
case 1:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 2:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 4:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
}
SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);

5
fs/binfmt_elf.c
View File

@ -938,6 +938,11 @@ static int load_elf_binary(struct linux_binprm * bprm, struct pt_regs * regs)
kfree(elf_interpreter);
} else {
elf_entry = loc->elf_ex.e_entry;
if (BAD_ADDR(elf_entry)) {
send_sig(SIGSEGV, current, 0);
retval = -ENOEXEC; /* Nobody gets to see this, but.. */
goto out_free_dentry;
}
}
kfree(elf_phdata);

13
fs/compat_ioctl.c
View File

@ -2531,18 +2531,9 @@ static int rtc_ioctl(unsigned fd, unsigned cmd, unsigned long arg)
val32 = kval;
return put_user(val32, (unsigned int __user *)arg);
case RTC_IRQP_SET32:
return sys_ioctl(fd, RTC_IRQP_SET, arg);
case RTC_EPOCH_SET32:
ret = get_user(val32, (unsigned int __user *)arg);
if (ret)
return ret;
kval = val32;
set_fs(KERNEL_DS);
ret = sys_ioctl(fd, (cmd == RTC_IRQP_SET32) ?
RTC_IRQP_SET : RTC_EPOCH_SET,
(unsigned long)&kval);
set_fs(oldfs);
return ret;
return sys_ioctl(fd, RTC_EPOCH_SET, arg);
default:
/* unreached */
return -ENOIOCTLCMD;

8
fs/namei.c
View File

@ -2224,13 +2224,17 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
* and other special files. --ADM
*/
asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
int newdfd, const char __user *newname)
int newdfd, const char __user *newname,
int flags)
{
struct dentry *new_dentry;
struct nameidata nd, old_nd;
int error;
char * to;
if (flags != 0)
return -EINVAL;
to = getname(newname);
if (IS_ERR(to))
return PTR_ERR(to);
@ -2263,7 +2267,7 @@ exit:
asmlinkage long sys_link(const char __user *oldname, const char __user *newname)
{
return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname);
return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
}
/*

36
fs/ntfs/ChangeLog
View File

@ -1,9 +1,9 @@
ToDo/Notes:
- Find and fix bugs.
- The only places in the kernel where a file is resized are
ntfs_file_write*() and ntfs_truncate() for both of which i_sem is
ntfs_file_write*() and ntfs_truncate() for both of which i_mutex is
held. Just have to be careful in read-/writepage and other helpers
not running under i_sem that we play nice... Also need to be careful
not running under i_mutex that we play nice. Also need to be careful
with initialized_size extension in ntfs_file_write*() and writepage.
UPDATE: The only things that need to be checked are the compressed
write and the other attribute resize/write cases like index
@ -19,6 +19,24 @@ ToDo/Notes:
- Enable the code for setting the NT4 compatibility flag when we start
making NTFS 1.2 specific modifications.
2.1.26 - Minor bug fixes and updates.
- Fix a potential overflow in file.c where a cast to s64 was missing in
a left shift of a page index.
- The struct inode has had its i_sem semaphore changed to a mutex named
i_mutex.
- We have struct kmem_cache now so use it instead of the typedef
kmem_cache_t. (Pekka Enberg)
- Implement support for sector sizes above 512 bytes (up to the maximum
supported by NTFS which is 4096 bytes).
- Do more detailed reporting of why we cannot mount read-write by
special casing the VOLUME_MODIFIED_BY_CHKDSK flag.
- Miscellaneous updates to layout.h.
- Cope with attribute list attribute having invalid flags. Windows
copes with this and even chkdsk does not detect or fix this so we
have to cope with it, too. Thanks to Pawel Kot for reporting the
problem.
2.1.25 - (Almost) fully implement write(2) and truncate(2).
- Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and
@ -373,7 +391,7 @@ ToDo/Notes:
single one of them had an mst error. (Thanks to Ken MacFerrin for
the bug report.)
- Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date()
where we failed to release i_sem on the $Quota/$Q attribute inode.
where we failed to release i_mutex on the $Quota/$Q attribute inode.
- Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup().
- Add mapping of unmapped buffers to all remaining code paths, i.e.
fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
@ -874,7 +892,7 @@ ToDo/Notes:
clusters. (Philipp Thomas)
- attrib.c::load_attribute_list(): Fix bug when initialized_size is a
multiple of the block_size but not the cluster size. (Szabolcs
Szakacsits <szaka@sienet.hu>)
Szakacsits)
2.1.2 - Important bug fixes aleviating the hangs in statfs.
@ -884,7 +902,7 @@ ToDo/Notes:
- Add handling for initialized_size != data_size in compressed files.
- Reduce function local stack usage from 0x3d4 bytes to just noise in
fs/ntfs/upcase.c. (Randy Dunlap <rdunlap@xenotime.net>)
fs/ntfs/upcase.c. (Randy Dunlap)
- Remove compiler warnings for newer gcc.
- Pages are no longer kmapped by mm/filemap.c::generic_file_write()
around calls to ->{prepare,commit}_write. Adapt NTFS appropriately
@ -1201,11 +1219,11 @@ ToDo/Notes:
the kernel. We probably want a kernel generic init_address_space()
function...
- Drop BKL from ntfs_readdir() after consultation with Al Viro. The
only caller of ->readdir() is vfs_readdir() which holds i_sem during
the call, and i_sem is sufficient protection against changes in the
directory inode (including ->i_size).
only caller of ->readdir() is vfs_readdir() which holds i_mutex
during the call, and i_mutex is sufficient protection against changes
in the directory inode (including ->i_size).
- Use generic_file_llseek() for directories (as opposed to
default_llseek()) as this downs i_sem instead of the BKL which is
default_llseek()) as this downs i_mutex instead of the BKL which is
what we now need for exclusion against ->f_pos changes considering we
no longer take the BKL in ntfs_readdir().

2
fs/ntfs/Makefile
View File

@ -6,7 +6,7 @@ ntfs-objs := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \
index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
unistr.o upcase.o
EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.25\"
EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.26\"
ifeq ($(CONFIG_NTFS_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG

18
fs/ntfs/aops.c
View File

@ -2,7 +2,7 @@
* aops.c - NTFS kernel address space operations and page cache handling.
* Part of the Linux-NTFS project.
*
* Copyright (c) 2001-2005 Anton Altaparmakov
* Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@ -200,8 +200,8 @@ static int ntfs_read_block(struct page *page)
/* $MFT/$DATA must have its complete runlist in memory at all times. */
BUG_ON(!ni->runlist.rl && !ni->mft_no && !NInoAttr(ni));
blocksize_bits = VFS_I(ni)->i_blkbits;
blocksize = 1 << blocksize_bits;
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
create_empty_buffers(page, blocksize, 0);
@ -569,10 +569,8 @@ static int ntfs_write_block(struct page *page, struct writeback_control *wbc)
BUG_ON(!NInoNonResident(ni));
BUG_ON(NInoMstProtected(ni));
blocksize_bits = vi->i_blkbits;
blocksize = 1 << blocksize_bits;
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
BUG_ON(!PageUptodate(page));
create_empty_buffers(page, blocksize,
@ -949,8 +947,8 @@ static int ntfs_write_mst_block(struct page *page,
*/
BUG_ON(!(is_mft || S_ISDIR(vi->i_mode) ||
(NInoAttr(ni) && ni->type == AT_INDEX_ALLOCATION)));
bh_size_bits = vi->i_blkbits;
bh_size = 1 << bh_size_bits;
bh_size = vol->sb->s_blocksize;
bh_size_bits = vol->sb->s_blocksize_bits;
max_bhs = PAGE_CACHE_SIZE / bh_size;
BUG_ON(!max_bhs);
BUG_ON(max_bhs > MAX_BUF_PER_PAGE);
@ -1596,7 +1594,7 @@ void mark_ntfs_record_dirty(struct page *page, const unsigned int ofs) {
BUG_ON(!PageUptodate(page));
end = ofs + ni->itype.index.block_size;
bh_size = 1 << VFS_I(ni)->i_blkbits;
bh_size = VFS_I(ni)->i_sb->s_blocksize;
spin_lock(&mapping->private_lock);
if (unlikely(!page_has_buffers(page))) {
spin_unlock(&mapping->private_lock);

10
fs/ntfs/file.c
View File

@ -1,7 +1,7 @@
/*
* file.c - NTFS kernel file operations. Part of the Linux-NTFS project.
*
* Copyright (c) 2001-2005 Anton Altaparmakov
* Copyright (c) 2001-2006 Anton Altaparmakov
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
@ -248,7 +248,7 @@ do_non_resident_extend:
* enough to make ntfs_writepage() work.
*/
write_lock_irqsave(&ni->size_lock, flags);
ni->initialized_size = (index + 1) << PAGE_CACHE_SHIFT;
ni->initialized_size = (s64)(index + 1) << PAGE_CACHE_SHIFT;
if (ni->initialized_size > new_init_size)
ni->initialized_size = new_init_size;
write_unlock_irqrestore(&ni->size_lock, flags);
@ -529,8 +529,8 @@ static int ntfs_prepare_pages_for_non_resident_write(struct page **pages,
"index 0x%lx, nr_pages 0x%x, pos 0x%llx, bytes 0x%zx.",
vi->i_ino, ni->type, pages[0]->index, nr_pages,
(long long)pos, bytes);
blocksize_bits = vi->i_blkbits;
blocksize = 1 << blocksize_bits;
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
u = 0;
do {
struct page *page = pages[u];
@ -1525,7 +1525,7 @@ static inline int ntfs_commit_pages_after_non_resident_write(
vi = pages[0]->mapping->host;
ni = NTFS_I(vi);
blocksize = 1 << vi->i_blkbits;
blocksize = vi->i_sb->s_blocksize;
end = pos + bytes;
u = 0;
do {

49
fs/ntfs/inode.c
View File

@ -677,13 +677,28 @@ static int ntfs_read_locked_inode(struct inode *vi)
ntfs_debug("Attribute list found in inode 0x%lx.", vi->i_ino);
NInoSetAttrList(ni);
a = ctx->attr;
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_COMPRESSION_MASK ||
a->flags & ATTR_IS_SPARSE) {
if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(vi->i_sb, "Attribute list attribute is "
"compressed/encrypted/sparse.");
"compressed.");
goto unm_err_out;
}
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_IS_SPARSE) {
if (a->non_resident) {
ntfs_error(vi->i_sb, "Non-resident attribute "
"list attribute is encrypted/"
"sparse.");
goto unm_err_out;
}
ntfs_warning(vi->i_sb, "Resident attribute list "
"attribute in inode 0x%lx is marked "
"encrypted/sparse which is not true. "
"However, Windows allows this and "
"chkdsk does not detect or correct it "
"so we will just ignore the invalid "
"flags and pretend they are not set.",
vi->i_ino);
}
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
@ -1809,19 +1824,33 @@ int ntfs_read_inode_mount(struct inode *vi)
} else /* if (!err) */ {
ATTR_LIST_ENTRY *al_entry, *next_al_entry;
u8 *al_end;
static const char *es = " Not allowed. $MFT is corrupt. "
"You should run chkdsk.";
ntfs_debug("Attribute list attribute found in $MFT.");
NInoSetAttrList(ni);
a = ctx->attr;
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_COMPRESSION_MASK ||
a->flags & ATTR_IS_SPARSE) {
if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(sb, "Attribute list attribute is "
"compressed/encrypted/sparse. Not "
"allowed. $MFT is corrupt. You should "
"run chkdsk.");
"compressed.%s", es);
goto put_err_out;
}
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_IS_SPARSE) {
if (a->non_resident) {
ntfs_error(sb, "Non-resident attribute list "
"attribute is encrypted/"
"sparse.%s", es);
goto put_err_out;
}
ntfs_warning(sb, "Resident attribute list attribute "
"in $MFT system file is marked "
"encrypted/sparse which is not true. "
"However, Windows allows this and "
"chkdsk does not detect or correct it "
"so we will just ignore the invalid "
"flags and pretend they are not set.");
}
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);

Some files were not shown because too many files have changed in this diff Show More