forked from Minki/linux
ARM: kirkwood: add support for OpenBlocks A7 platform
The OpenBlocks A7 board is designed and sold by PlatHome, and based on a Kirkwood 6283 Marvell SoC. It is quite similar to the OpenBlocks A6 already supported in the kernel, with the following main differences: - The A6 uses a RTC on I2C, while the A7 uses the internal SoC RTC. - The A6 has one Ethernet port, while the A7 has two Ethernet ports - The A6 has only one USB port, while the A7 integrates a USB hub, which provides two front-side USB port, and an internal USB port as well. - The A6 has 512 MB of RAM, while the A7 has 1 GB of RAM. - Slightly different GPIOs for some functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Thomas Petazzoni
Jason Cooper
parent
f039dfb51b
commit
f24b56cbcd
@ -95,12 +95,13 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
|
||||
kirkwood-ns2mini.dtb \
|
||||
kirkwood-nsa310.dtb \
|
||||
kirkwood-nsa310a.dtb \
|
||||
kirkwood-openblocks_a6.dtb \
|
||||
kirkwood-openblocks_a7.dtb \
|
||||
kirkwood-sheevaplug.dtb \
|
||||
kirkwood-sheevaplug-esata.dtb \
|
||||
kirkwood-topkick.dtb \
|
||||
kirkwood-ts219-6281.dtb \
|
||||
kirkwood-ts219-6282.dtb \
|
||||
kirkwood-openblocks_a6.dtb
|
||||
kirkwood-ts219-6282.dtb
|
||||
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
|
||||
msm8960-cdp.dtb
|
||||
|
||||
223
arch/arm/boot/dts/kirkwood-openblocks_a7.dts
Normal file
223
arch/arm/boot/dts/kirkwood-openblocks_a7.dts
Normal file
@ -0,0 +1,223 @@
|
||||
/*
|
||||
* Device Tree file for OpenBlocks A7 board
|
||||
*
|
||||
* Copyright (C) 2013 Free Electrons
|
||||
*
|
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6282.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Plat'Home OpenBlocksA7";
|
||||
compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
status = "ok";
|
||||
pinctrl-0 = <&pmx_uart0>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
serial@12100 {
|
||||
status = "ok";
|
||||
pinctrl-0 = <&pmx_uart1>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
nr-ports = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@11100 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pmx_twsi1>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
s24c02: s24c02@50 {
|
||||
compatible = "24c02";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl: pinctrl@10000 {
|
||||
pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
pmx_uart0: pmx-uart0 {
|
||||
marvell,pins = "mpp10", "mpp11", "mpp15",
|
||||
"mpp16";
|
||||
marvell,function = "uart0";
|
||||
};
|
||||
|
||||
pmx_uart1: pmx-uart1 {
|
||||
marvell,pins = "mpp13", "mpp14", "mpp8",
|
||||
"mpp9";
|
||||
marvell,function = "uart1";
|
||||
};
|
||||
|
||||
pmx_sysrst: pmx-sysrst {
|
||||
marvell,pins = "mpp6";
|
||||
marvell,function = "sysrst";
|
||||
};
|
||||
|
||||
pmx_dip_switches: pmx-dip-switches {
|
||||
marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
/*
|
||||
* Accessible on connector J202. The MPP
|
||||
* listed below are pin 1-7, pin 8 is unused,
|
||||
* pin 9 is external reset input and pin 10 is
|
||||
* ground.
|
||||
*/
|
||||
pmx_gpio_header: pmx-gpio-header {
|
||||
marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
|
||||
"mpp35", "mpp34", "mpp40";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_gpio_init: pmx-init {
|
||||
marvell,pins = "mpp38";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_usb_oc: pmx-usb-oc {
|
||||
marvell,pins = "mpp39";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_leds: pmx-leds {
|
||||
marvell,pins = "mpp41", "mpp42", "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_ge1: pmx-ge1 {
|
||||
marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
|
||||
"mpp24", "mpp25", "mpp26", "mpp27",
|
||||
"mpp30", "mpp31", "mpp32", "mpp33";
|
||||
marvell,function = "ge1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_leds>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led-red {
|
||||
label = "obsa7:red:stat";
|
||||
gpios = <&gpio1 9 1>;
|
||||
};
|
||||
|
||||
led-green {
|
||||
label = "obsa7:green:stat";
|
||||
gpios = <&gpio1 10 1>;
|
||||
};
|
||||
|
||||
led-yellow {
|
||||
label = "obsa7:yellow:stat";
|
||||
gpios = <&gpio1 11 1>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_gpio_init>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button@1 {
|
||||
label = "Init Button";
|
||||
linux,code = <116>;
|
||||
gpios = <&gpio1 6 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
chip-delay = <25>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pmx_nand>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
reg = <0x0 0x1c0000>;
|
||||
};
|
||||
|
||||
partition@1c0000 {
|
||||
label = "env";
|
||||
reg = <0x1c0000 0x2c0000>;
|
||||
};
|
||||
|
||||
partition@480000 {
|
||||
label = "test";
|
||||
reg = <0x480000 0x160000>;
|
||||
};
|
||||
|
||||
partition@5e0000 {
|
||||
label = "conf";
|
||||
reg = <0x5e0000 0x540000>;
|
||||
};
|
||||
|
||||
partition@b20000 {
|
||||
label = "linux";
|
||||
reg = <0xb20000 0x3d40000>;
|
||||
};
|
||||
|
||||
partition@4860000 {
|
||||
label = "user";
|
||||
reg = <0x4860000 0xb7a0000>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@1 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
ethernet0-port@0 {
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pmx_ge1>;
|
||||
pinctrl-names = "default";
|
||||
ethernet1-port@0 {
|
||||
phy-handle = <ðphy1>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user