forked from Minki/linux
regulator: Add support for S2MPA01 regulator
Add support for S2MPA01 voltage and current regulator. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Sachin Kamat
Lee Jones
parent
ce24991e1e
commit
f187927146
@ -416,6 +416,13 @@ config REGULATOR_RC5T583
|
||||
through regulator interface. The device supports multiple DCDC/LDO
|
||||
outputs which can be controlled by i2c communication.
|
||||
|
||||
config REGULATOR_S2MPA01
|
||||
tristate "Samsung S2MPA01 voltage regulator"
|
||||
depends on MFD_SEC_CORE
|
||||
help
|
||||
This driver controls Samsung S2MPA01 voltage output regulator
|
||||
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
|
||||
|
||||
config REGULATOR_S2MPS11
|
||||
tristate "Samsung S2MPS11 voltage regulator"
|
||||
depends on MFD_SEC_CORE
|
||||
|
||||
@ -57,6 +57,7 @@ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
|
||||
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
|
||||
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
|
||||
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
|
||||
|
||||
481
drivers/regulator/s2mpa01.c
Normal file
481
drivers/regulator/s2mpa01.c
Normal file
@ -0,0 +1,481 @@
|
||||
/*
|
||||
* Copyright (c) 2013 Samsung Electronics Co., Ltd
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/bug.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/mfd/samsung/core.h>
|
||||
#include <linux/mfd/samsung/s2mpa01.h>
|
||||
|
||||
#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
|
||||
|
||||
struct s2mpa01_info {
|
||||
int ramp_delay24;
|
||||
int ramp_delay3;
|
||||
int ramp_delay5;
|
||||
int ramp_delay16;
|
||||
int ramp_delay7;
|
||||
int ramp_delay8910;
|
||||
};
|
||||
|
||||
static int get_ramp_delay(int ramp_delay)
|
||||
{
|
||||
unsigned char cnt = 0;
|
||||
|
||||
ramp_delay /= 6250;
|
||||
|
||||
while (true) {
|
||||
ramp_delay = ramp_delay >> 1;
|
||||
if (ramp_delay == 0)
|
||||
break;
|
||||
cnt++;
|
||||
}
|
||||
|
||||
if (cnt > 3)
|
||||
cnt = 3;
|
||||
|
||||
return cnt;
|
||||
}
|
||||
|
||||
static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
|
||||
unsigned int old_selector,
|
||||
unsigned int new_selector)
|
||||
{
|
||||
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
|
||||
unsigned int ramp_delay = 0;
|
||||
int old_volt, new_volt;
|
||||
|
||||
switch (rdev->desc->id) {
|
||||
case S2MPA01_BUCK2:
|
||||
case S2MPA01_BUCK4:
|
||||
ramp_delay = s2mpa01->ramp_delay24;
|
||||
break;
|
||||
case S2MPA01_BUCK3:
|
||||
ramp_delay = s2mpa01->ramp_delay3;
|
||||
break;
|
||||
case S2MPA01_BUCK5:
|
||||
ramp_delay = s2mpa01->ramp_delay5;
|
||||
break;
|
||||
case S2MPA01_BUCK1:
|
||||
case S2MPA01_BUCK6:
|
||||
ramp_delay = s2mpa01->ramp_delay16;
|
||||
break;
|
||||
case S2MPA01_BUCK7:
|
||||
ramp_delay = s2mpa01->ramp_delay7;
|
||||
break;
|
||||
case S2MPA01_BUCK8:
|
||||
case S2MPA01_BUCK9:
|
||||
case S2MPA01_BUCK10:
|
||||
ramp_delay = s2mpa01->ramp_delay8910;
|
||||
break;
|
||||
}
|
||||
|
||||
if (ramp_delay == 0)
|
||||
ramp_delay = rdev->desc->ramp_delay;
|
||||
|
||||
old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
|
||||
new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
|
||||
|
||||
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
|
||||
}
|
||||
|
||||
static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
||||
{
|
||||
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
|
||||
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
|
||||
unsigned int ramp_enable = 1, enable_shift = 0;
|
||||
int ret;
|
||||
|
||||
switch (rdev->desc->id) {
|
||||
case S2MPA01_BUCK1:
|
||||
enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
|
||||
if (!ramp_delay) {
|
||||
ramp_enable = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
if (ramp_delay > s2mpa01->ramp_delay16)
|
||||
s2mpa01->ramp_delay16 = ramp_delay;
|
||||
else
|
||||
ramp_delay = s2mpa01->ramp_delay16;
|
||||
|
||||
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
|
||||
ramp_reg = S2MPA01_REG_RAMP1;
|
||||
break;
|
||||
case S2MPA01_BUCK2:
|
||||
enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
|
||||
if (!ramp_delay) {
|
||||
ramp_enable = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
if (ramp_delay > s2mpa01->ramp_delay24)
|
||||
s2mpa01->ramp_delay24 = ramp_delay;
|
||||
else
|
||||
ramp_delay = s2mpa01->ramp_delay24;
|
||||
|
||||
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
|
||||
ramp_reg = S2MPA01_REG_RAMP1;
|
||||
break;
|
||||
case S2MPA01_BUCK3:
|
||||
enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
|
||||
if (!ramp_delay) {
|
||||
ramp_enable = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
s2mpa01->ramp_delay3 = ramp_delay;
|
||||
ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
|
||||
ramp_reg = S2MPA01_REG_RAMP1;
|
||||
break;
|
||||
case S2MPA01_BUCK4:
|
||||
enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
|
||||
if (!ramp_delay) {
|
||||
ramp_enable = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
if (ramp_delay > s2mpa01->ramp_delay24)
|
||||
s2mpa01->ramp_delay24 = ramp_delay;
|
||||
else
|
||||
ramp_delay = s2mpa01->ramp_delay24;
|
||||
|
||||
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
|
||||
ramp_reg = S2MPA01_REG_RAMP1;
|
||||
break;
|
||||
case S2MPA01_BUCK5:
|
||||
s2mpa01->ramp_delay5 = ramp_delay;
|
||||
ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
|
||||
break;
|
||||
case S2MPA01_BUCK6:
|
||||
if (ramp_delay > s2mpa01->ramp_delay16)
|
||||
s2mpa01->ramp_delay16 = ramp_delay;
|
||||
else
|
||||
ramp_delay = s2mpa01->ramp_delay16;
|
||||
|
||||
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
|
||||
break;
|
||||
case S2MPA01_BUCK7:
|
||||
s2mpa01->ramp_delay7 = ramp_delay;
|
||||
ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
|
||||
break;
|
||||
case S2MPA01_BUCK8:
|
||||
case S2MPA01_BUCK9:
|
||||
case S2MPA01_BUCK10:
|
||||
if (ramp_delay > s2mpa01->ramp_delay8910)
|
||||
s2mpa01->ramp_delay8910 = ramp_delay;
|
||||
else
|
||||
ramp_delay = s2mpa01->ramp_delay8910;
|
||||
|
||||
ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
|
||||
break;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (!ramp_enable)
|
||||
goto ramp_disable;
|
||||
|
||||
if (enable_shift) {
|
||||
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
|
||||
1 << enable_shift, 1 << enable_shift);
|
||||
if (ret) {
|
||||
dev_err(&rdev->dev, "failed to enable ramp rate\n");
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
ramp_val = get_ramp_delay(ramp_delay);
|
||||
|
||||
return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
|
||||
ramp_val << ramp_shift);
|
||||
|
||||
ramp_disable:
|
||||
return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
|
||||
1 << enable_shift, 0);
|
||||
}
|
||||
|
||||
static struct regulator_ops s2mpa01_ldo_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
};
|
||||
|
||||
static struct regulator_ops s2mpa01_buck_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel,
|
||||
.set_ramp_delay = s2mpa01_set_ramp_delay,
|
||||
};
|
||||
|
||||
#define regulator_desc_ldo1(num) { \
|
||||
.name = "LDO"#num, \
|
||||
.id = S2MPA01_LDO##num, \
|
||||
.ops = &s2mpa01_ldo_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_LDO_MIN, \
|
||||
.uV_step = S2MPA01_LDO_STEP1, \
|
||||
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
|
||||
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
|
||||
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
#define regulator_desc_ldo2(num) { \
|
||||
.name = "LDO"#num, \
|
||||
.id = S2MPA01_LDO##num, \
|
||||
.ops = &s2mpa01_ldo_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_LDO_MIN, \
|
||||
.uV_step = S2MPA01_LDO_STEP2, \
|
||||
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
|
||||
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
|
||||
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
|
||||
#define regulator_desc_buck1_4(num) { \
|
||||
.name = "BUCK"#num, \
|
||||
.id = S2MPA01_BUCK##num, \
|
||||
.ops = &s2mpa01_buck_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_BUCK_MIN1, \
|
||||
.uV_step = S2MPA01_BUCK_STEP1, \
|
||||
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
|
||||
.ramp_delay = S2MPA01_RAMP_DELAY, \
|
||||
.vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \
|
||||
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
|
||||
#define regulator_desc_buck5 { \
|
||||
.name = "BUCK5", \
|
||||
.id = S2MPA01_BUCK5, \
|
||||
.ops = &s2mpa01_buck_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_BUCK_MIN2, \
|
||||
.uV_step = S2MPA01_BUCK_STEP1, \
|
||||
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
|
||||
.ramp_delay = S2MPA01_RAMP_DELAY, \
|
||||
.vsel_reg = S2MPA01_REG_B5CTRL2, \
|
||||
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_B5CTRL1, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
|
||||
#define regulator_desc_buck6_7(num) { \
|
||||
.name = "BUCK"#num, \
|
||||
.id = S2MPA01_BUCK##num, \
|
||||
.ops = &s2mpa01_buck_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_BUCK_MIN1, \
|
||||
.uV_step = S2MPA01_BUCK_STEP1, \
|
||||
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
|
||||
.ramp_delay = S2MPA01_RAMP_DELAY, \
|
||||
.vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
|
||||
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
|
||||
#define regulator_desc_buck8 { \
|
||||
.name = "BUCK8", \
|
||||
.id = S2MPA01_BUCK8, \
|
||||
.ops = &s2mpa01_buck_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_BUCK_MIN2, \
|
||||
.uV_step = S2MPA01_BUCK_STEP2, \
|
||||
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
|
||||
.ramp_delay = S2MPA01_RAMP_DELAY, \
|
||||
.vsel_reg = S2MPA01_REG_B8CTRL2, \
|
||||
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_B8CTRL1, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
|
||||
#define regulator_desc_buck9 { \
|
||||
.name = "BUCK9", \
|
||||
.id = S2MPA01_BUCK9, \
|
||||
.ops = &s2mpa01_buck_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_BUCK_MIN4, \
|
||||
.uV_step = S2MPA01_BUCK_STEP2, \
|
||||
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
|
||||
.ramp_delay = S2MPA01_RAMP_DELAY, \
|
||||
.vsel_reg = S2MPA01_REG_B9CTRL2, \
|
||||
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_B9CTRL1, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
|
||||
#define regulator_desc_buck10 { \
|
||||
.name = "BUCK10", \
|
||||
.id = S2MPA01_BUCK10, \
|
||||
.ops = &s2mpa01_buck_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = S2MPA01_BUCK_MIN3, \
|
||||
.uV_step = S2MPA01_BUCK_STEP2, \
|
||||
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
|
||||
.ramp_delay = S2MPA01_RAMP_DELAY, \
|
||||
.vsel_reg = S2MPA01_REG_B10CTRL2, \
|
||||
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
|
||||
.enable_reg = S2MPA01_REG_B10CTRL1, \
|
||||
.enable_mask = S2MPA01_ENABLE_MASK \
|
||||
}
|
||||
|
||||
static struct regulator_desc regulators[] = {
|
||||
regulator_desc_ldo2(1),
|
||||
regulator_desc_ldo1(2),
|
||||
regulator_desc_ldo1(3),
|
||||
regulator_desc_ldo1(4),
|
||||
regulator_desc_ldo1(5),
|
||||
regulator_desc_ldo2(6),
|
||||
regulator_desc_ldo1(7),
|
||||
regulator_desc_ldo1(8),
|
||||
regulator_desc_ldo1(9),
|
||||
regulator_desc_ldo1(10),
|
||||
regulator_desc_ldo2(11),
|
||||
regulator_desc_ldo1(12),
|
||||
regulator_desc_ldo1(13),
|
||||
regulator_desc_ldo1(14),
|
||||
regulator_desc_ldo1(15),
|
||||
regulator_desc_ldo1(16),
|
||||
regulator_desc_ldo1(17),
|
||||
regulator_desc_ldo1(18),
|
||||
regulator_desc_ldo1(19),
|
||||
regulator_desc_ldo1(20),
|
||||
regulator_desc_ldo1(21),
|
||||
regulator_desc_ldo2(22),
|
||||
regulator_desc_ldo2(23),
|
||||
regulator_desc_ldo1(24),
|
||||
regulator_desc_ldo1(25),
|
||||
regulator_desc_ldo1(26),
|
||||
regulator_desc_buck1_4(1),
|
||||
regulator_desc_buck1_4(2),
|
||||
regulator_desc_buck1_4(3),
|
||||
regulator_desc_buck1_4(4),
|
||||
regulator_desc_buck5,
|
||||
regulator_desc_buck6_7(6),
|
||||
regulator_desc_buck6_7(7),
|
||||
regulator_desc_buck8,
|
||||
regulator_desc_buck9,
|
||||
regulator_desc_buck10,
|
||||
};
|
||||
|
||||
static int s2mpa01_pmic_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
||||
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
|
||||
struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
|
||||
struct device_node *reg_np = NULL;
|
||||
struct regulator_config config = { };
|
||||
struct s2mpa01_info *s2mpa01;
|
||||
int i;
|
||||
|
||||
s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
|
||||
if (!s2mpa01)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
|
||||
rdata[i].name = regulators[i].name;
|
||||
|
||||
if (iodev->dev->of_node) {
|
||||
reg_np = of_get_child_by_name(iodev->dev->of_node,
|
||||
"regulators");
|
||||
if (!reg_np) {
|
||||
dev_err(&pdev->dev,
|
||||
"could not find regulators sub-node\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
of_regulator_match(&pdev->dev, reg_np, rdata,
|
||||
S2MPA01_REGULATOR_MAX);
|
||||
of_node_put(reg_np);
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, s2mpa01);
|
||||
|
||||
config.dev = &pdev->dev;
|
||||
config.regmap = iodev->regmap_pmic;
|
||||
config.driver_data = s2mpa01;
|
||||
|
||||
for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
|
||||
struct regulator_dev *rdev;
|
||||
if (pdata)
|
||||
config.init_data = pdata->regulators[i].initdata;
|
||||
else
|
||||
config.init_data = rdata[i].init_data;
|
||||
|
||||
if (reg_np)
|
||||
config.of_node = rdata[i].of_node;
|
||||
|
||||
rdev = devm_regulator_register(&pdev->dev,
|
||||
®ulators[i], &config);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(&pdev->dev, "regulator init failed for %d\n",
|
||||
i);
|
||||
return PTR_ERR(rdev);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct platform_device_id s2mpa01_pmic_id[] = {
|
||||
{ "s2mpa01-pmic", 0},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
|
||||
|
||||
static struct platform_driver s2mpa01_pmic_driver = {
|
||||
.driver = {
|
||||
.name = "s2mpa01-pmic",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = s2mpa01_pmic_probe,
|
||||
.id_table = s2mpa01_pmic_id,
|
||||
};
|
||||
|
||||
module_platform_driver(s2mpa01_pmic_driver);
|
||||
|
||||
/* Module information */
|
||||
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
|
||||
MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
|
||||
MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user