forked from Minki/linux
[ARM] 3417/1: add support for logicpd pxa270 card engine
Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Lennert Buytenhek
Russell King
parent
fa5ebfccf3
commit
e9937d4b0a
@ -10,6 +10,11 @@ config ARCH_LUBBOCK
|
||||
select PXA25x
|
||||
select SA1111
|
||||
|
||||
config MACH_LOGICPD_PXA270
|
||||
bool "LogicPD PXA270 Card Engine Development Platform"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
|
||||
config MACH_MAINSTONE
|
||||
bool "Intel HCDDBBVA0 Development Platform"
|
||||
select PXA27x
|
||||
|
||||
@ -9,6 +9,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o
|
||||
|
||||
# Specific board support
|
||||
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
|
||||
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
|
||||
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
|
||||
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
|
||||
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
|
||||
|
||||
393
arch/arm/mach-pxa/lpd270.c
Normal file
393
arch/arm/mach-pxa/lpd270.c
Normal file
@ -0,0 +1,393 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-pxa/lpd270.c
|
||||
*
|
||||
* Support for the LogicPD PXA270 Card Engine.
|
||||
* Derived from the mainstone code, which carries these notices:
|
||||
*
|
||||
* Author: Nicolas Pitre
|
||||
* Created: Nov 05, 2002
|
||||
* Copyright: MontaVista Software Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/sysdev.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/types.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/sizes.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach/flash.h>
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/arch/lpd270.h>
|
||||
#include <asm/arch/audio.h>
|
||||
#include <asm/arch/pxafb.h>
|
||||
#include <asm/arch/mmc.h>
|
||||
#include <asm/arch/irda.h>
|
||||
#include <asm/arch/ohci.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
|
||||
static unsigned int lpd270_irq_enabled;
|
||||
|
||||
static void lpd270_mask_irq(unsigned int irq)
|
||||
{
|
||||
int lpd270_irq = irq - LPD270_IRQ(0);
|
||||
|
||||
__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
|
||||
|
||||
lpd270_irq_enabled &= ~(1 << lpd270_irq);
|
||||
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
||||
}
|
||||
|
||||
static void lpd270_unmask_irq(unsigned int irq)
|
||||
{
|
||||
int lpd270_irq = irq - LPD270_IRQ(0);
|
||||
|
||||
lpd270_irq_enabled |= 1 << lpd270_irq;
|
||||
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
||||
}
|
||||
|
||||
static struct irqchip lpd270_irq_chip = {
|
||||
.ack = lpd270_mask_irq,
|
||||
.mask = lpd270_mask_irq,
|
||||
.unmask = lpd270_unmask_irq,
|
||||
};
|
||||
|
||||
static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc,
|
||||
struct pt_regs *regs)
|
||||
{
|
||||
unsigned long pending;
|
||||
|
||||
pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
|
||||
do {
|
||||
GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
|
||||
if (likely(pending)) {
|
||||
irq = LPD270_IRQ(0) + __ffs(pending);
|
||||
desc = irq_desc + irq;
|
||||
desc_handle_irq(irq, desc, regs);
|
||||
|
||||
pending = __raw_readw(LPD270_INT_STATUS) &
|
||||
lpd270_irq_enabled;
|
||||
}
|
||||
} while (pending);
|
||||
}
|
||||
|
||||
static void __init lpd270_init_irq(void)
|
||||
{
|
||||
int irq;
|
||||
|
||||
pxa_init_irq();
|
||||
|
||||
__raw_writew(0, LPD270_INT_MASK);
|
||||
__raw_writew(0, LPD270_INT_STATUS);
|
||||
|
||||
/* setup extra LogicPD PXA270 irqs */
|
||||
for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
|
||||
set_irq_chip(irq, &lpd270_irq_chip);
|
||||
set_irq_handler(irq, do_level_IRQ);
|
||||
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
||||
}
|
||||
set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
|
||||
set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
|
||||
}
|
||||
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int lpd270_irq_resume(struct sys_device *dev)
|
||||
{
|
||||
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct sysdev_class lpd270_irq_sysclass = {
|
||||
set_kset_name("cpld_irq"),
|
||||
.resume = lpd270_irq_resume,
|
||||
};
|
||||
|
||||
static struct sys_device lpd270_irq_device = {
|
||||
.cls = &lpd270_irq_sysclass,
|
||||
};
|
||||
|
||||
static int __init lpd270_irq_device_init(void)
|
||||
{
|
||||
int ret = sysdev_class_register(&lpd270_irq_sysclass);
|
||||
if (ret == 0)
|
||||
ret = sysdev_register(&lpd270_irq_device);
|
||||
return ret;
|
||||
}
|
||||
|
||||
device_initcall(lpd270_irq_device_init);
|
||||
#endif
|
||||
|
||||
|
||||
static struct resource smc91x_resources[] = {
|
||||
[0] = {
|
||||
.start = LPD270_ETH_PHYS,
|
||||
.end = (LPD270_ETH_PHYS + 0xfffff),
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = LPD270_ETHERNET_IRQ,
|
||||
.end = LPD270_ETHERNET_IRQ,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device smc91x_device = {
|
||||
.name = "smc91x",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(smc91x_resources),
|
||||
.resource = smc91x_resources,
|
||||
};
|
||||
|
||||
static struct platform_device lpd270_audio_device = {
|
||||
.name = "pxa2xx-ac97",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
static struct resource lpd270_flash_resources[] = {
|
||||
[0] = {
|
||||
.start = PXA_CS0_PHYS,
|
||||
.end = PXA_CS0_PHYS + SZ_64M - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = PXA_CS1_PHYS,
|
||||
.end = PXA_CS1_PHYS + SZ_64M - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mtd_partition lpd270_flash0_partitions[] = {
|
||||
{
|
||||
.name = "Bootloader",
|
||||
.size = 0x00040000,
|
||||
.offset = 0,
|
||||
.mask_flags = MTD_WRITEABLE /* force read-only */
|
||||
}, {
|
||||
.name = "Kernel",
|
||||
.size = 0x00400000,
|
||||
.offset = 0x00040000,
|
||||
}, {
|
||||
.name = "Filesystem",
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.offset = 0x00440000
|
||||
},
|
||||
};
|
||||
|
||||
static struct flash_platform_data lpd270_flash_data[2] = {
|
||||
{
|
||||
.name = "processor-flash",
|
||||
.map_name = "cfi_probe",
|
||||
.parts = lpd270_flash0_partitions,
|
||||
.nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
|
||||
}, {
|
||||
.name = "mainboard-flash",
|
||||
.map_name = "cfi_probe",
|
||||
.parts = NULL,
|
||||
.nr_parts = 0,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device lpd270_flash_device[2] = {
|
||||
{
|
||||
.name = "pxa2xx-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &lpd270_flash_data[0],
|
||||
},
|
||||
.resource = &lpd270_flash_resources[0],
|
||||
.num_resources = 1,
|
||||
}, {
|
||||
.name = "pxa2xx-flash",
|
||||
.id = 1,
|
||||
.dev = {
|
||||
.platform_data = &lpd270_flash_data[1],
|
||||
},
|
||||
.resource = &lpd270_flash_resources[1],
|
||||
.num_resources = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static void lpd270_backlight_power(int on)
|
||||
{
|
||||
if (on) {
|
||||
pxa_gpio_mode(GPIO16_PWM0_MD);
|
||||
pxa_set_cken(CKEN0_PWM0, 1);
|
||||
PWM_CTRL0 = 0;
|
||||
PWM_PWDUTY0 = 0x3ff;
|
||||
PWM_PERVAL0 = 0x3ff;
|
||||
} else {
|
||||
PWM_CTRL0 = 0;
|
||||
PWM_PWDUTY0 = 0x0;
|
||||
PWM_PERVAL0 = 0x3FF;
|
||||
pxa_set_cken(CKEN0_PWM0, 0);
|
||||
}
|
||||
}
|
||||
|
||||
/* 5.7" TFT QVGA (LoLo display number 1) */
|
||||
static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
|
||||
.pixclock = 100000,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.bpp = 16,
|
||||
.hsync_len = 64,
|
||||
.left_margin = 0x27,
|
||||
.right_margin = 0x09,
|
||||
.vsync_len = 0x04,
|
||||
.upper_margin = 0x08,
|
||||
.lower_margin = 0x14,
|
||||
.sync = 0,
|
||||
.lccr0 = 0x07800080,
|
||||
.lccr3 = 0x04400007,
|
||||
.pxafb_backlight_power = lpd270_backlight_power,
|
||||
};
|
||||
|
||||
/* 6.4" TFT VGA (LoLo display number 5) */
|
||||
static struct pxafb_mach_info sharp_lq64d343 __initdata = {
|
||||
.pixclock = 20000,
|
||||
.xres = 640,
|
||||
.yres = 480,
|
||||
.bpp = 16,
|
||||
.hsync_len = 49,
|
||||
.left_margin = 0x89,
|
||||
.right_margin = 0x19,
|
||||
.vsync_len = 18,
|
||||
.upper_margin = 0x22,
|
||||
.lower_margin = 0,
|
||||
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
||||
.lccr0 = 0x07800080,
|
||||
.lccr3 = 0x04400001,
|
||||
.pxafb_backlight_power = lpd270_backlight_power,
|
||||
};
|
||||
|
||||
/* 3.5" TFT QVGA (LoLo display number 8) */
|
||||
static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
|
||||
.pixclock = 100000,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.bpp = 16,
|
||||
.hsync_len = 0x34,
|
||||
.left_margin = 0x09,
|
||||
.right_margin = 0x09,
|
||||
.vsync_len = 0x08,
|
||||
.upper_margin = 0x05,
|
||||
.lower_margin = 0x14,
|
||||
.sync = 0,
|
||||
.lccr0 = 0x07800080,
|
||||
.lccr3 = 0x04400007,
|
||||
.pxafb_backlight_power = lpd270_backlight_power,
|
||||
};
|
||||
|
||||
static struct platform_device *platform_devices[] __initdata = {
|
||||
&smc91x_device,
|
||||
&lpd270_audio_device,
|
||||
&lpd270_flash_device[0],
|
||||
&lpd270_flash_device[1],
|
||||
};
|
||||
|
||||
static int lpd270_ohci_init(struct device *dev)
|
||||
{
|
||||
/* setup Port1 GPIO pin. */
|
||||
pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
|
||||
pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
|
||||
|
||||
/* Set the Power Control Polarity Low and Power Sense
|
||||
Polarity Low to active low. */
|
||||
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
|
||||
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct pxaohci_platform_data lpd270_ohci_platform_data = {
|
||||
.port_mode = PMM_PERPORT_MODE,
|
||||
.init = lpd270_ohci_init,
|
||||
};
|
||||
|
||||
static void __init lpd270_init(void)
|
||||
{
|
||||
lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
|
||||
lpd270_flash_data[1].width = 4;
|
||||
|
||||
/*
|
||||
* System bus arbiter setting:
|
||||
* - Core_Park
|
||||
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
|
||||
*/
|
||||
ARB_CNTRL = ARB_CORE_PARK | 0x234;
|
||||
|
||||
/*
|
||||
* On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
|
||||
*/
|
||||
pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
|
||||
|
||||
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||
|
||||
// set_pxa_fb_info(&sharp_lq057q3dc02);
|
||||
set_pxa_fb_info(&sharp_lq64d343);
|
||||
// set_pxa_fb_info(&sharp_lq035q7db02_20);
|
||||
|
||||
pxa_set_ohci_info(&lpd270_ohci_platform_data);
|
||||
}
|
||||
|
||||
|
||||
static struct map_desc lpd270_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = LPD270_CPLD_VIRT,
|
||||
.pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
|
||||
.length = LPD270_CPLD_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init lpd270_map_io(void)
|
||||
{
|
||||
pxa_map_io();
|
||||
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
|
||||
|
||||
/* initialize sleep mode regs (wake-up sources, etc) */
|
||||
PGSR0 = 0x00008800;
|
||||
PGSR1 = 0x00000002;
|
||||
PGSR2 = 0x0001FC00;
|
||||
PGSR3 = 0x00001F81;
|
||||
PWER = 0xC0000002;
|
||||
PRER = 0x00000002;
|
||||
PFER = 0x00000002;
|
||||
|
||||
/* for use I SRAM as framebuffer. */
|
||||
PSLR |= 0x00000F04;
|
||||
PCFR = 0x00000066;
|
||||
}
|
||||
|
||||
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
|
||||
/* Maintainer: Peter Barada */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = lpd270_map_io,
|
||||
.init_irq = lpd270_init_irq,
|
||||
.timer = &pxa_timer,
|
||||
.init_machine = lpd270_init,
|
||||
MACHINE_END
|
||||
@ -176,6 +176,7 @@
|
||||
#elif defined(CONFIG_SHARP_LOCOMO)
|
||||
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
|
||||
#elif defined(CONFIG_ARCH_LUBBOCK) || \
|
||||
defined(CONFIG_MACH_LOGICPD_PXA270) || \
|
||||
defined(CONFIG_MACH_MAINSTONE)
|
||||
#define NR_IRQS (IRQ_BOARD_END)
|
||||
#else
|
||||
@ -196,6 +197,11 @@
|
||||
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
|
||||
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
|
||||
|
||||
#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
|
||||
#define LPD270_USBC_IRQ LPD270_IRQ(2)
|
||||
#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
|
||||
#define LPD270_AC97_IRQ LPD270_IRQ(4)
|
||||
|
||||
#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
|
||||
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
|
||||
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
|
||||
|
||||
38
include/asm-arm/arch-pxa/lpd270.h
Normal file
38
include/asm-arm/arch-pxa/lpd270.h
Normal file
@ -0,0 +1,38 @@
|
||||
/*
|
||||
* include/asm-arm/arch-pxa/lpd270.h
|
||||
*
|
||||
* Author: Lennert Buytenhek
|
||||
* Created: Feb 10, 2006
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_LPD270_H
|
||||
#define __ASM_ARCH_LPD270_H
|
||||
|
||||
#define LPD270_CPLD_PHYS PXA_CS2_PHYS
|
||||
#define LPD270_CPLD_VIRT 0xf0000000
|
||||
#define LPD270_CPLD_SIZE 0x00100000
|
||||
|
||||
#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000)
|
||||
|
||||
/* CPLD registers */
|
||||
#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x)))
|
||||
#define LPD270_CONTROL LPD270_CPLD_REG(0x00)
|
||||
#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04)
|
||||
#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08)
|
||||
#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14)
|
||||
#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20)
|
||||
#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24)
|
||||
#define LPD270_EGPIO LPD270_CPLD_REG(0x30)
|
||||
#define LPD270_INT_MASK LPD270_CPLD_REG(0x40)
|
||||
#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50)
|
||||
|
||||
#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */
|
||||
#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
|
||||
#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */
|
||||
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user