Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Merge net into net-next because some upcoming net-next changes
build on top of bug fixes that went into net.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/usage-model.txt

@@ -191,9 +191,11 @@ Linux it will look something like this:
 	};
 
 The bootargs property contains the kernel arguments, and the initrd-*
-properties define the address and size of an initrd blob.  The
-chosen node may also optionally contain an arbitrary number of
-additional properties for platform-specific configuration data.
+properties define the address and size of an initrd blob.  Note that
+initrd-end is the first address after the initrd image, so this doesn't
+match the usual semantic of struct resource.  The chosen node may also
+optionally contain an arbitrary number of additional properties for
+platform-specific configuration data.
 
 During early boot, the architecture setup code calls of_scan_flat_dt()
 several times with different helper callbacks to parse device tree

Documentation/kernel-parameters.txt

@@ -3005,6 +3005,27 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Force threading of all interrupt handlers except those
 			marked explicitly IRQF_NO_THREAD.
 
+	tmem		[KNL,XEN]
+			Enable the Transcendent memory driver if built-in.
+
+	tmem.cleancache=0|1 [KNL, XEN]
+			Default is on (1). Disable the usage of the cleancache
+			API to send anonymous pages to the hypervisor.
+
+	tmem.frontswap=0|1 [KNL, XEN]
+			Default is on (1). Disable the usage of the frontswap
+			API to send swap pages to the hypervisor. If disabled
+			the selfballooning and selfshrinking are force disabled.
+
+	tmem.selfballooning=0|1 [KNL, XEN]
+			Default is on (1). Disable the driving of swap pages
+			to the hypervisor.
+
+	tmem.selfshrinking=0|1 [KNL, XEN]
+			Default is on (1). Partial swapoff that immediately
+			transfers pages from Xen hypervisor back to the
+			kernel based on different criteria.
+
 	topology=	[S390]
 			Format: {off | on}
 			Specify if the kernel should make use of the cpu

Documentation/kernel-per-CPU-kthreads.txt

@@ -0,0 +1,202 @@
+REDUCING OS JITTER DUE TO PER-CPU KTHREADS
+
+This document lists per-CPU kthreads in the Linux kernel and presents
+options to control their OS jitter.  Note that non-per-CPU kthreads are
+not listed here.  To reduce OS jitter from non-per-CPU kthreads, bind
+them to a "housekeeping" CPU dedicated to such work.
+
+
+REFERENCES
+
+o	Documentation/IRQ-affinity.txt:  Binding interrupts to sets of CPUs.
+
+o	Documentation/cgroups:  Using cgroups to bind tasks to sets of CPUs.
+
+o	man taskset:  Using the taskset command to bind tasks to sets
+	of CPUs.
+
+o	man sched_setaffinity:  Using the sched_setaffinity() system
+	call to bind tasks to sets of CPUs.
+
+o	/sys/devices/system/cpu/cpuN/online:  Control CPU N's hotplug state,
+	writing "0" to offline and "1" to online.
+
+o	In order to locate kernel-generated OS jitter on CPU N:
+
+		cd /sys/kernel/debug/tracing
+		echo 1 > max_graph_depth # Increase the "1" for more detail
+		echo function_graph > current_tracer
+		# run workload
+		cat per_cpu/cpuN/trace
+
+
+KTHREADS
+
+Name: ehca_comp/%u
+Purpose: Periodically process Infiniband-related work.
+To reduce its OS jitter, do any of the following:
+1.	Don't use eHCA Infiniband hardware, instead choosing hardware
+	that does not require per-CPU kthreads.  This will prevent these
+	kthreads from being created in the first place.  (This will
+	work for most people, as this hardware, though important, is
+	relatively old and is produced in relatively low unit volumes.)
+2.	Do all eHCA-Infiniband-related work on other CPUs, including
+	interrupts.
+3.	Rework the eHCA driver so that its per-CPU kthreads are
+	provisioned only on selected CPUs.
+
+
+Name: irq/%d-%s
+Purpose: Handle threaded interrupts.
+To reduce its OS jitter, do the following:
+1.	Use irq affinity to force the irq threads to execute on
+	some other CPU.
+
+Name: kcmtpd_ctr_%d
+Purpose: Handle Bluetooth work.
+To reduce its OS jitter, do one of the following:
+1.	Don't use Bluetooth, in which case these kthreads won't be
+	created in the first place.
+2.	Use irq affinity to force Bluetooth-related interrupts to
+	occur on some other CPU and furthermore initiate all
+	Bluetooth activity on some other CPU.
+
+Name: ksoftirqd/%u
+Purpose: Execute softirq handlers when threaded or when under heavy load.
+To reduce its OS jitter, each softirq vector must be handled
+separately as follows:
+TIMER_SOFTIRQ:  Do all of the following:
+1.	To the extent possible, keep the CPU out of the kernel when it
+	is non-idle, for example, by avoiding system calls and by forcing
+	both kernel threads and interrupts to execute elsewhere.
+2.	Build with CONFIG_HOTPLUG_CPU=y.  After boot completes, force
+	the CPU offline, then bring it back online.  This forces
+	recurring timers to migrate elsewhere.	If you are concerned
+	with multiple CPUs, force them all offline before bringing the
+	first one back online.  Once you have onlined the CPUs in question,
+	do not offline any other CPUs, because doing so could force the
+	timer back onto one of the CPUs in question.
+NET_TX_SOFTIRQ and NET_RX_SOFTIRQ:  Do all of the following:
+1.	Force networking interrupts onto other CPUs.
+2.	Initiate any network I/O on other CPUs.
+3.	Once your application has started, prevent CPU-hotplug operations
+	from being initiated from tasks that might run on the CPU to
+	be de-jittered.  (It is OK to force this CPU offline and then
+	bring it back online before you start your application.)
+BLOCK_SOFTIRQ:  Do all of the following:
+1.	Force block-device interrupts onto some other CPU.
+2.	Initiate any block I/O on other CPUs.
+3.	Once your application has started, prevent CPU-hotplug operations
+	from being initiated from tasks that might run on the CPU to
+	be de-jittered.  (It is OK to force this CPU offline and then
+	bring it back online before you start your application.)
+BLOCK_IOPOLL_SOFTIRQ:  Do all of the following:
+1.	Force block-device interrupts onto some other CPU.
+2.	Initiate any block I/O and block-I/O polling on other CPUs.
+3.	Once your application has started, prevent CPU-hotplug operations
+	from being initiated from tasks that might run on the CPU to
+	be de-jittered.  (It is OK to force this CPU offline and then
+	bring it back online before you start your application.)
+TASKLET_SOFTIRQ: Do one or more of the following:
+1.	Avoid use of drivers that use tasklets.  (Such drivers will contain
+	calls to things like tasklet_schedule().)
+2.	Convert all drivers that you must use from tasklets to workqueues.
+3.	Force interrupts for drivers using tasklets onto other CPUs,
+	and also do I/O involving these drivers on other CPUs.
+SCHED_SOFTIRQ: Do all of the following:
+1.	Avoid sending scheduler IPIs to the CPU to be de-jittered,
+	for example, ensure that at most one runnable kthread is present
+	on that CPU.  If a thread that expects to run on the de-jittered
+	CPU awakens, the scheduler will send an IPI that can result in
+	a subsequent SCHED_SOFTIRQ.
+2.	Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y,
+	CONFIG_NO_HZ_FULL=y, and, in addition, ensure that the CPU
+	to be de-jittered is marked as an adaptive-ticks CPU using the
+	"nohz_full=" boot parameter.  This reduces the number of
+	scheduler-clock interrupts that the de-jittered CPU receives,
+	minimizing its chances of being selected to do the load balancing
+	work that runs in SCHED_SOFTIRQ context.
+3.	To the extent possible, keep the CPU out of the kernel when it
+	is non-idle, for example, by avoiding system calls and by
+	forcing both kernel threads and interrupts to execute elsewhere.
+	This further reduces the number of scheduler-clock interrupts
+	received by the de-jittered CPU.
+HRTIMER_SOFTIRQ:  Do all of the following:
+1.	To the extent possible, keep the CPU out of the kernel when it
+	is non-idle.  For example, avoid system calls and force both
+	kernel threads and interrupts to execute elsewhere.
+2.	Build with CONFIG_HOTPLUG_CPU=y.  Once boot completes, force the
+	CPU offline, then bring it back online.  This forces recurring
+	timers to migrate elsewhere.  If you are concerned with multiple
+	CPUs, force them all offline before bringing the first one
+	back online.  Once you have onlined the CPUs in question, do not
+	offline any other CPUs, because doing so could force the timer
+	back onto one of the CPUs in question.
+RCU_SOFTIRQ:  Do at least one of the following:
+1.	Offload callbacks and keep the CPU in either dyntick-idle or
+	adaptive-ticks state by doing all of the following:
+	a.	Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y,
+		CONFIG_NO_HZ_FULL=y, and, in addition ensure that the CPU
+		to be de-jittered is marked as an adaptive-ticks CPU using
+		the "nohz_full=" boot parameter.  Bind the rcuo kthreads
+		to housekeeping CPUs, which can tolerate OS jitter.
+	b.	To the extent possible, keep the CPU out of the kernel
+		when it is non-idle, for example, by avoiding system
+		calls and by forcing both kernel threads and interrupts
+		to execute elsewhere.
+2.	Enable RCU to do its processing remotely via dyntick-idle by
+	doing all of the following:
+	a.	Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y.
+	b.	Ensure that the CPU goes idle frequently, allowing other
+		CPUs to detect that it has passed through an RCU quiescent
+		state.	If the kernel is built with CONFIG_NO_HZ_FULL=y,
+		userspace execution also allows other CPUs to detect that
+		the CPU in question has passed through a quiescent state.
+	c.	To the extent possible, keep the CPU out of the kernel
+		when it is non-idle, for example, by avoiding system
+		calls and by forcing both kernel threads and interrupts
+		to execute elsewhere.
+
+Name: rcuc/%u
+Purpose: Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels.
+To reduce its OS jitter, do at least one of the following:
+1.	Build the kernel with CONFIG_PREEMPT=n.  This prevents these
+	kthreads from being created in the first place, and also obviates
+	the need for RCU priority boosting.  This approach is feasible
+	for workloads that do not require high degrees of responsiveness.
+2.	Build the kernel with CONFIG_RCU_BOOST=n.  This prevents these
+	kthreads from being created in the first place.  This approach
+	is feasible only if your workload never requires RCU priority
+	boosting, for example, if you ensure frequent idle time on all
+	CPUs that might execute within the kernel.
+3.	Build with CONFIG_RCU_NOCB_CPU=y and CONFIG_RCU_NOCB_CPU_ALL=y,
+	which offloads all RCU callbacks to kthreads that can be moved
+	off of CPUs susceptible to OS jitter.  This approach prevents the
+	rcuc/%u kthreads from having any work to do, so that they are
+	never awakened.
+4.	Ensure that the CPU never enters the kernel, and, in particular,
+	avoid initiating any CPU hotplug operations on this CPU.  This is
+	another way of preventing any callbacks from being queued on the
+	CPU, again preventing the rcuc/%u kthreads from having any work
+	to do.
+
+Name: rcuob/%d, rcuop/%d, and rcuos/%d
+Purpose: Offload RCU callbacks from the corresponding CPU.
+To reduce its OS jitter, do at least one of the following:
+1.	Use affinity, cgroups, or other mechanism to force these kthreads
+	to execute on some other CPU.
+2.	Build with CONFIG_RCU_NOCB_CPUS=n, which will prevent these
+	kthreads from being created in the first place.  However, please
+	note that this will not eliminate OS jitter, but will instead
+	shift it to RCU_SOFTIRQ.
+
+Name: watchdog/%u
+Purpose: Detect software lockups on each CPU.
+To reduce its OS jitter, do at least one of the following:
+1.	Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these
+	kthreads from being created in the first place.
+2.	Echo a zero to /proc/sys/kernel/watchdog to disable the
+	watchdog timer.
+3.	Echo a large number of /proc/sys/kernel/watchdog_thresh in
+	order to reduce the frequency of OS jitter due to the watchdog
+	timer down to a level that is acceptable for your workload.

Documentation/power/devices.txt

@@ -268,7 +268,7 @@ situations.
 System Power Management Phases
 ------------------------------
 Suspending or resuming the system is done in several phases.  Different phases
-are used for standby or memory sleep states ("suspend-to-RAM") and the
+are used for freeze, standby, and memory sleep states ("suspend-to-RAM") and the
 hibernation state ("suspend-to-disk").  Each phase involves executing callbacks
 for every device before the next phase begins.  Not all busses or classes
 support all these callbacks and not all drivers use all the callbacks.  The
@@ -309,7 +309,8 @@ execute the corresponding method from dev->driver->pm instead if there is one.
 
 Entering System Suspend
 -----------------------
-When the system goes into the standby or memory sleep state, the phases are:
+When the system goes into the freeze, standby or memory sleep state,
+the phases are:
 
 		prepare, suspend, suspend_late, suspend_noirq.
 
@@ -368,7 +369,7 @@ the devices that were suspended.
 
 Leaving System Suspend
 ----------------------
-When resuming from standby or memory sleep, the phases are:
+When resuming from freeze, standby or memory sleep, the phases are:
 
 		resume_noirq, resume_early, resume, complete.
 
@@ -433,8 +434,8 @@ the system log.
 
 Entering Hibernation
 --------------------
-Hibernating the system is more complicated than putting it into the standby or
-memory sleep state, because it involves creating and saving a system image.
+Hibernating the system is more complicated than putting it into the other
+sleep states, because it involves creating and saving a system image.
 Therefore there are more phases for hibernation, with a different set of
 callbacks.  These phases always run after tasks have been frozen and memory has
 been freed.
@@ -485,8 +486,8 @@ image forms an atomic snapshot of the system state.
 
 At this point the system image is saved, and the devices then need to be
 prepared for the upcoming system shutdown.  This is much like suspending them
-before putting the system into the standby or memory sleep state, and the phases
-are similar.
+before putting the system into the freeze, standby or memory sleep state,
+and the phases are similar.
 
     9.	The prepare phase is discussed above.
 

Documentation/power/interface.txt

@@ -7,8 +7,8 @@ running. The interface exists in /sys/power/ directory (assuming sysfs
 is mounted at /sys). 
 
 /sys/power/state controls system power state. Reading from this file
-returns what states are supported, which is hard-coded to 'standby'
-(Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk'
+returns what states are supported, which is hard-coded to 'freeze',
+'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk'
 (Suspend-to-Disk). 
 
 Writing to this file one of those strings causes the system to

Documentation/power/notifiers.txt

@@ -15,8 +15,10 @@ A suspend/hibernation notifier may be used for this purpose.
 The subsystems or drivers having such needs can register suspend notifiers that
 will be called upon the following events by the PM core:
 
-PM_HIBERNATION_PREPARE	The system is going to hibernate or suspend, tasks will
-			be frozen immediately.
+PM_HIBERNATION_PREPARE	The system is going to hibernate, tasks will be frozen
+			immediately. This is different from PM_SUSPEND_PREPARE
+			below because here we do additional work between notifiers
+			and drivers freezing.
 
 PM_POST_HIBERNATION	The system memory state has been restored from a
 			hibernation image or an error occurred during

Documentation/power/states.txt

@@ -2,12 +2,26 @@
 System Power Management States
 
 
-The kernel supports three power management states generically, though
-each is dependent on platform support code to implement the low-level
-details for each state. This file describes each state, what they are
+The kernel supports four power management states generically, though
+one is generic and the other three are dependent on platform support
+code to implement the low-level details for each state.
+This file describes each state, what they are
 commonly called, what ACPI state they map to, and what string to write
 to /sys/power/state to enter that state
 
+state:		Freeze / Low-Power Idle
+ACPI state:	S0
+String:		"freeze"
+
+This state is a generic, pure software, light-weight, low-power state.
+It allows more energy to be saved relative to idle by freezing user
+space and putting all I/O devices into low-power states (possibly
+lower-power than available at run time), such that the processors can
+spend more time in their idle states.
+This state can be used for platforms without Standby/Suspend-to-RAM
+support, or it can be used in addition to Suspend-to-RAM (memory sleep)
+to provide reduced resume latency.
+
 
 State:		Standby / Power-On Suspend
 ACPI State:	S1
@@ -22,9 +36,6 @@ We try to put devices in a low-power state equivalent to D1, which
 also offers low power savings, but low resume latency. Not all devices
 support D1, and those that don't are left on. 
 
-A transition from Standby to the On state should take about 1-2
-seconds. 
-
 
 State:		Suspend-to-RAM
 ACPI State:	S3
@@ -42,9 +53,6 @@ transition back to the On state.
 For at least ACPI, STR requires some minimal boot-strapping code to
 resume the system from STR. This may be true on other platforms. 
 
-A transition from Suspend-to-RAM to the On state should take about
-3-5 seconds. 
-
 
 State:		Suspend-to-disk
 ACPI State:	S4
@@ -74,7 +82,3 @@ low-power state (like ACPI S4), or it may simply power down. Powering
 down offers greater savings, and allows this mechanism to work on any
 system. However, entering a real low-power state allows the user to
 trigger wake up events (e.g. pressing a key or opening a laptop lid).
-
-A transition from Suspend-to-Disk to the On state should take about 30
-seconds, though it's typically a bit more with the current
-implementation. 

MAINTAINERS

@@ -3865,9 +3865,16 @@ M:	K. Y. Srinivasan <kys@microsoft.com>
 M:	Haiyang Zhang <haiyangz@microsoft.com>
 L:	devel@linuxdriverproject.org
 S:	Maintained
-F:	drivers/hv/
+F:	arch/x86/include/asm/mshyperv.h
+F:	arch/x86/include/uapi/asm/hyperv.h
+F:	arch/x86/kernel/cpu/mshyperv.c
 F:	drivers/hid/hid-hyperv.c
+F:	drivers/hv/
 F:	drivers/net/hyperv/
+F:	drivers/scsi/storvsc_drv.c
+F:	drivers/video/hyperv_fb.c
+F:	include/linux/hyperv.h
+F:	tools/hv/
 
 I2C OVER PARALLEL PORT
 M:	Jean Delvare <khali@linux-fr.org>
@@ -4641,12 +4648,13 @@ F:	include/linux/sunrpc/
 F:	include/uapi/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Marcelo Tosatti <mtosatti@redhat.com>
 M:	Gleb Natapov <gleb@redhat.com>
+M:	Paolo Bonzini <pbonzini@redhat.com>
 L:	kvm@vger.kernel.org
-W:	http://kvm.qumranet.com
+W:	http://linux-kvm.org
 S:	Supported
-F:	Documentation/*/kvm.txt
+F:	Documentation/*/kvm*.txt
+F:	Documentation/virtual/kvm/
 F:	arch/*/kvm/
 F:	arch/*/include/asm/kvm*
 F:	include/linux/kvm*
@@ -4976,6 +4984,13 @@ S:	Maintained
 F:	Documentation/hwmon/lm90
 F:	drivers/hwmon/lm90.c
 
+LM95234 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/lm95234
+F:	drivers/hwmon/lm95234.c
+
 LME2510 MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -5509,18 +5524,18 @@ F:	Documentation/networking/s2io.txt
 F:	Documentation/networking/vxge.txt
 F:	drivers/net/ethernet/neterion/
 
-NETFILTER/IPTABLES/IPCHAINS
-P:	Harald Welte
-P:	Jozsef Kadlecsik
+NETFILTER/IPTABLES
 M:	Pablo Neira Ayuso <pablo@netfilter.org>
 M:	Patrick McHardy <kaber@trash.net>
+M:	Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
 L:	netfilter-devel@vger.kernel.org
 L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git git://1984.lsi.us.es/nf
-T:	git git://1984.lsi.us.es/nf-next
+Q:	http://patchwork.ozlabs.org/project/netfilter-devel/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -7854,7 +7869,7 @@ L:	linux-scsi@vger.kernel.org
 L:	target-devel@vger.kernel.org
 L:	http://groups.google.com/group/linux-iscsi-target-dev
 W:	http://www.linux-iscsi.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core.git master
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 S:	Supported
 F:	drivers/target/
 F:	include/target/
@@ -8182,6 +8197,13 @@ F:	drivers/mmc/host/sh_mobile_sdhi.c
 F:	include/linux/mmc/tmio.h
 F:	include/linux/mmc/sh_mobile_sdhi.h
 
+TMP401 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/tmp401
+F:	drivers/hwmon/tmp401.c
+
 TMPFS (SHMEM FILESYSTEM)
 M:	Hugh Dickins <hughd@google.com>
 L:	linux-mm@kvack.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -213,6 +213,9 @@ config USE_GENERIC_SMP_HELPERS
 config GENERIC_SMP_IDLE_THREAD
        bool
 
+config GENERIC_IDLE_POLL_SETUP
+       bool
+
 # Select if arch init_task initializer is different to init/init_task.c
 config ARCH_INIT_TASK
        bool

arch/arm/Kconfig

@@ -38,6 +38,7 @@ config ARM
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
@@ -488,7 +489,7 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
-	select CPU_V7
+	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select PINCTRL

arch/arm/Makefile

@@ -309,7 +309,7 @@ define archhelp
   echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
   echo  '* xipImage      - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
   echo  '  uImage        - U-Boot wrapped zImage'
-  echo  '  bootpImage    - Combined zImage and initial RAM disk' 
+  echo  '  bootpImage    - Combined zImage and initial RAM disk'
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '* dtbs          - Build device tree blobs for enabled boards'
   echo  '  install       - Install uncompressed kernel'

arch/arm/common/mcpm_platsmp.c

@@ -15,8 +15,6 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 
-#include <linux/irqchip/arm-gic.h>
-
 #include <asm/mcpm.h>
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
@@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i
 static void __cpuinit mcpm_secondary_init(unsigned int cpu)
 {
 	mcpm_cpu_powered_up();
-	gic_secondary_init(0);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/configs/omap1_defconfig

@@ -199,7 +199,6 @@ CONFIG_USB_PHY=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y

arch/arm/configs/omap2plus_defconfig

@@ -204,7 +204,6 @@ CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y

arch/arm/include/asm/cmpxchg.h

@@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 	((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr),	\
 						atomic64_t,		\
 						counter),		\
-					      (unsigned long)(o),	\
-					      (unsigned long)(n)))
+					      (unsigned long long)(o),	\
+					      (unsigned long long)(n)))
 
 #define cmpxchg64_local(ptr, o, n)					\
 	((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr),	\
 						local64_t,		\
 						a),			\
-					     (unsigned long)(o),	\
-					     (unsigned long)(n)))
+					     (unsigned long long)(o),	\
+					     (unsigned long long)(n)))
 
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 

arch/arm/kernel/smp.c

@@ -251,7 +251,7 @@ void __ref cpu_die(void)
 	 * this returns, power and/or clocks can be removed at any point
 	 * from this CPU and its cache by platform_cpu_kill().
 	 */
-	RCU_NONIDLE(complete(&cpu_died));
+	complete(&cpu_died);
 
 	/*
 	 * Ensure that the cache lines associated with that completion are

arch/arm/mach-tegra/tegra2_emc.c

@@ -307,11 +307,6 @@ static int tegra_emc_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "missing register base\n");
-		return -ENOMEM;
-	}
-
 	emc_regbase = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(emc_regbase))
 		return PTR_ERR(emc_regbase);

arch/arm/plat-samsung/adc.c

@@ -381,11 +381,6 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	}
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(dev, "failed to find registers\n");
-		return -ENXIO;
-	}
-
 	adc->regs = devm_ioremap_resource(dev, regs);
 	if (IS_ERR(adc->regs))
 		return PTR_ERR(adc->regs);

arch/arm/xen/enlighten.c

@@ -152,11 +152,12 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma,
 }
 EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range);
 
-static int __init xen_secondary_init(unsigned int cpu)
+static void __init xen_percpu_init(void *unused)
 {
 	struct vcpu_register_vcpu_info info;
 	struct vcpu_info *vcpup;
 	int err;
+	int cpu = get_cpu();
 
 	pr_info("Xen: initializing cpu%d\n", cpu);
 	vcpup = per_cpu_ptr(xen_vcpu_info, cpu);
@@ -165,14 +166,10 @@ static int __init xen_secondary_init(unsigned int cpu)
 	info.offset = offset_in_page(vcpup);
 
 	err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info);
-	if (err) {
-		pr_debug("register_vcpu_info failed: err=%d\n", err);
-	} else {
-		/* This cpu is using the registered vcpu info, even if
-		   later ones fail to. */
-		per_cpu(xen_vcpu, cpu) = vcpup;
-	}
-	return 0;
+	BUG_ON(err);
+	per_cpu(xen_vcpu, cpu) = vcpup;
+
+	enable_percpu_irq(xen_events_irq, 0);
 }
 
 static void xen_restart(char str, const char *cmd)
@@ -208,7 +205,6 @@ static int __init xen_guest_init(void)
 	const char *version = NULL;
 	const char *xen_prefix = "xen,xen-";
 	struct resource res;
-	int i;
 
 	node = of_find_compatible_node(NULL, NULL, "xen,xen");
 	if (!node) {
@@ -265,19 +261,23 @@ static int __init xen_guest_init(void)
 			                       sizeof(struct vcpu_info));
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;
-	for_each_online_cpu(i)
-		xen_secondary_init(i);
 
 	gnttab_init();
 	if (!xen_initial_domain())
 		xenbus_probe(NULL);
 
+	return 0;
+}
+core_initcall(xen_guest_init);
+
+static int __init xen_pm_init(void)
+{
 	pm_power_off = xen_power_off;
 	arm_pm_restart = xen_restart;
 
 	return 0;
 }
-core_initcall(xen_guest_init);
+subsys_initcall(xen_pm_init);
 
 static irqreturn_t xen_arm_callback(int irq, void *arg)
 {
@@ -285,11 +285,6 @@ static irqreturn_t xen_arm_callback(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-static __init void xen_percpu_enable_events(void *unused)
-{
-	enable_percpu_irq(xen_events_irq, 0);
-}
-
 static int __init xen_init_events(void)
 {
 	if (!xen_domain() || xen_events_irq < 0)
@@ -303,7 +298,7 @@ static int __init xen_init_events(void)
 		return -EINVAL;
 	}
 
-	on_each_cpu(xen_percpu_enable_events, NULL, 0);
+	on_each_cpu(xen_percpu_init, NULL, 0);
 
 	return 0;
 }

arch/arm64/Kconfig

@@ -122,8 +122,6 @@ endmenu
 
 menu "Kernel Features"
 
-source "kernel/time/Kconfig"
-
 config ARM64_64K_PAGES
 	bool "Enable 64KB pages support"
 	help

arch/arm64/include/asm/assembler.h

@@ -82,7 +82,7 @@
 
 	.macro	enable_dbg_if_not_stepping, tmp
 	mrs	\tmp, mdscr_el1
-	tbnz	\tmp, #1, 9990f
+	tbnz	\tmp, #0, 9990f
 	enable_dbg
 9990:
 	.endm

arch/arm64/kernel/debug-monitors.c

@@ -136,8 +136,6 @@ void disable_debug_monitors(enum debug_el el)
  */
 static void clear_os_lock(void *unused)
 {
-	asm volatile("msr mdscr_el1, %0" : : "r" (0));
-	isb();
 	asm volatile("msr oslar_el1, %0" : : "r" (0));
 	isb();
 }

arch/arm64/kernel/early_printk.c

@@ -95,7 +95,7 @@ static void early_write(struct console *con, const char *s, unsigned n)
 	}
 }
 
-static struct console early_console = {
+static struct console early_console_dev = {
 	.name =		"earlycon",
 	.write =	early_write,
 	.flags =	CON_PRINTBUFFER | CON_BOOT,
@@ -145,7 +145,8 @@ static int __init setup_early_printk(char *buf)
 		early_base = early_io_map(paddr, EARLYCON_IOBASE);
 
 	printch = match->printch;
-	register_console(&early_console);
+	early_console = &early_console_dev;
+	register_console(&early_console_dev);
 
 	return 0;
 }

arch/arm64/kernel/setup.c

@@ -282,12 +282,13 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
-static int __init arm64_of_clk_init(void)
+static int __init arm64_device_init(void)
 {
 	of_clk_init(NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	return 0;
 }
-arch_initcall(arm64_of_clk_init);
+arch_initcall(arm64_device_init);
 
 static DEFINE_PER_CPU(struct cpu, cpu_data);
 
@@ -305,13 +306,6 @@ static int __init topology_init(void)
 }
 subsys_initcall(topology_init);
 
-static int __init arm64_device_probe(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	return 0;
-}
-device_initcall(arm64_device_probe);
-
 static const char *hwcap_str[] = {
 	"fp",
 	"asimd",

arch/arm64/mm/cache.S

@@ -52,7 +52,7 @@ loop1:
 	add	x2, x2, #4			// add 4 (line length offset)
 	mov	x4, #0x3ff
 	and	x4, x4, x1, lsr #3		// find maximum number on the way size
-	clz	x5, x4				// find bit position of way size increment
+	clz	w5, w4				// find bit position of way size increment
 	mov	x7, #0x7fff
 	and	x7, x7, x1, lsr #13		// extract max number of the index size
 loop2:

arch/arm64/mm/proc.S

@@ -119,8 +119,7 @@ ENTRY(__cpu_setup)
 
 	mov	x0, #3 << 20
 	msr	cpacr_el1, x0			// Enable FP/ASIMD
-	mov	x0, #1
-	msr	oslar_el1, x0			// Set the debug OS lock
+	msr	mdscr_el1, xzr			// Reset mdscr_el1
 	tlbi	vmalle1is			// invalidate I + D TLBs
 	/*
 	 * Memory region attributes for LPAE:

arch/avr32/Kconfig

@@ -205,6 +205,11 @@ config ARCH_DISCONTIGMEM_ENABLE
 config ARCH_SPARSEMEM_ENABLE
 	def_bool n
 
+config NODES_SHIFT
+	int
+	default "2"
+	depends on NEED_MULTIPLE_NODES
+
 source "mm/Kconfig"
 
 config OWNERSHIP_TRACE

arch/avr32/include/asm/Kbuild

@@ -2,3 +2,4 @@
 generic-y	+= clkdev.h
 generic-y	+= exec.h
 generic-y	+= trace_clock.h
+generic-y	+= param.h

arch/avr32/include/asm/numnodes.h

@@ -1,7 +0,0 @@
-#ifndef __ASM_AVR32_NUMNODES_H
-#define __ASM_AVR32_NUMNODES_H
-
-/* Max 4 nodes */
-#define NODES_SHIFT	2
-
-#endif /* __ASM_AVR32_NUMNODES_H */

arch/avr32/include/asm/param.h

@@ -1,9 +0,0 @@
-#ifndef __ASM_AVR32_PARAM_H
-#define __ASM_AVR32_PARAM_H
-
-#include <uapi/asm/param.h>
-
-# define HZ		CONFIG_HZ
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __ASM_AVR32_PARAM_H */

arch/avr32/include/uapi/asm/Kbuild

@@ -33,3 +33,4 @@ header-y += termbits.h
 header-y += termios.h
 header-y += types.h
 header-y += unistd.h
+generic-y += param.h

arch/avr32/include/uapi/asm/param.h

@@ -1,18 +0,0 @@
-#ifndef _UAPI__ASM_AVR32_PARAM_H
-#define _UAPI__ASM_AVR32_PARAM_H
-
-
-#ifndef HZ
-# define HZ		100
-#endif
-
-/* TODO: Should be configurable */
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-# define NOGROUP	(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64
-
-#endif /* _UAPI__ASM_AVR32_PARAM_H */

arch/avr32/kernel/module.c

@@ -264,7 +264,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			break;
 		case R_AVR32_GOT18SW:
 			if ((relocation & 0xfffe0003) != 0
-			    && (relocation & 0xfffc0003) != 0xffff0000)
+			    && (relocation & 0xfffc0000) != 0xfffc0000)
 				return reloc_overflow(module, "R_AVR32_GOT18SW",
 						     relocation);
 			relocation >>= 2;

arch/mips/alchemy/board-gpr.c

@@ -31,6 +31,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <asm/bootinfo.h>
+#include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <prom.h>

arch/mips/alchemy/common/time.c

@@ -36,6 +36,7 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 
+#include <asm/idle.h>
 #include <asm/processor.h>
 #include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>

arch/mips/ath79/setup.c

@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 
 #include <asm/bootinfo.h>
+#include <asm/idle.h>
 #include <asm/time.h>		/* for mips_hpt_frequency */
 #include <asm/reboot.h>		/* for _machine_{restart,halt} */
 #include <asm/mips_machine.h>

arch/mips/cobalt/reset.c

@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/leds.h>
 
+#include <asm/idle.h>
 #include <asm/processor.h>
 
 #include <cobalt.h>

arch/mips/configs/db1000_defconfig

@@ -228,7 +228,6 @@ CONFIG_HIDRAW=y
 CONFIG_USB_HID=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y

arch/mips/configs/db1235_defconfig

@@ -344,7 +344,6 @@ CONFIG_UHID=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y

arch/mips/configs/lemote2f_defconfig

@@ -300,7 +300,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_OTG_WHITELIST=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y

arch/mips/include/asm/clock.h

@@ -6,8 +6,6 @@
 #include <linux/seq_file.h>
 #include <linux/clk.h>
 
-extern void (*cpu_wait) (void);
-
 struct clk;
 
 struct clk_ops {

arch/mips/include/asm/idle.h

@@ -0,0 +1,23 @@
+#ifndef __ASM_IDLE_H
+#define __ASM_IDLE_H
+
+#include <linux/linkage.h>
+
+extern void (*cpu_wait)(void);
+extern void r4k_wait(void);
+extern asmlinkage void __r4k_wait(void);
+extern void r4k_wait_irqoff(void);
+extern void __pastwait(void);
+
+static inline int using_rollback_handler(void)
+{
+	return cpu_wait == r4k_wait;
+}
+
+static inline int address_is_in_r4k_wait_irqoff(unsigned long addr)
+{
+	return addr >= (unsigned long)r4k_wait_irqoff &&
+	       addr < (unsigned long)__pastwait;
+}
+
+#endif /* __ASM_IDLE_H  */

arch/mips/include/asm/io.h

@@ -118,7 +118,7 @@ static inline void set_io_port_base(unsigned long base)
  */
 static inline unsigned long virt_to_phys(volatile const void *address)
 {
-	return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
+	return __pa(address);
 }
 
 /*

arch/mips/include/asm/kvm_host.h

@@ -336,7 +336,7 @@ enum emulation_result {
 #define VPN2_MASK           0xffffe000
 #define TLB_IS_GLOBAL(x)    (((x).tlb_lo0 & MIPS3_PG_G) && ((x).tlb_lo1 & MIPS3_PG_G))
 #define TLB_VPN2(x)         ((x).tlb_hi & VPN2_MASK)
-#define TLB_ASID(x)         (ASID_MASK((x).tlb_hi))
+#define TLB_ASID(x)         ((x).tlb_hi & ASID_MASK)
 #define TLB_IS_VALID(x, va) (((va) & (1 << PAGE_SHIFT)) ? ((x).tlb_lo1 & MIPS3_PG_V) : ((x).tlb_lo0 & MIPS3_PG_V))
 
 struct kvm_mips_tlb {

arch/mips/include/asm/mmu_context.h

@@ -67,68 +67,45 @@ extern unsigned long pgd_current[];
 	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
 #endif
 #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 
-#define ASID_INC(asid)						\
-({								\
-	unsigned long __asid = asid;				\
-	__asm__("1:\taddiu\t%0,1\t\t\t\t# patched\n\t"		\
-	".section\t__asid_inc,\"a\"\n\t"			\
-	".word\t1b\n\t"						\
-	".previous"						\
-	:"=r" (__asid)						\
-	:"0" (__asid));						\
-	__asid;							\
-})
-#define ASID_MASK(asid)						\
-({								\
-	unsigned long __asid = asid;				\
-	__asm__("1:\tandi\t%0,%1,0xfc0\t\t\t# patched\n\t"	\
-	".section\t__asid_mask,\"a\"\n\t"			\
-	".word\t1b\n\t"						\
-	".previous"						\
-	:"=r" (__asid)						\
-	:"r" (__asid));						\
-	__asid;							\
-})
-#define ASID_VERSION_MASK					\
-({								\
-	unsigned long __asid;					\
-	__asm__("1:\taddiu\t%0,$0,0xff00\t\t\t\t# patched\n\t"	\
-	".section\t__asid_version_mask,\"a\"\n\t"		\
-	".word\t1b\n\t"						\
-	".previous"						\
-	:"=r" (__asid));					\
-	__asid;							\
-})
-#define ASID_FIRST_VERSION					\
-({								\
-	unsigned long __asid = asid;				\
-	__asm__("1:\tli\t%0,0x100\t\t\t\t# patched\n\t"		\
-	".section\t__asid_first_version,\"a\"\n\t"		\
-	".word\t1b\n\t"						\
-	".previous"						\
-	:"=r" (__asid));					\
-	__asid;							\
-})
+#define ASID_INC	0x40
+#define ASID_MASK	0xfc0
 
-#define ASID_FIRST_VERSION_R3000	0x1000
-#define ASID_FIRST_VERSION_R4000	0x100
-#define ASID_FIRST_VERSION_R8000	0x1000
-#define ASID_FIRST_VERSION_RM9000	0x1000
+#elif defined(CONFIG_CPU_R8000)
+
+#define ASID_INC	0x10
+#define ASID_MASK	0xff0
+
+#elif defined(CONFIG_MIPS_MT_SMTC)
+
+#define ASID_INC	0x1
+extern unsigned long smtc_asid_mask;
+#define ASID_MASK	(smtc_asid_mask)
+#define HW_ASID_MASK	0xff
+/* End SMTC/34K debug hack */
+#else /* FIXME: not correct for R6000 */
+
+#define ASID_INC	0x1
+#define ASID_MASK	0xff
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define SMTC_HW_ASID_MASK		0xff
-extern unsigned int smtc_asid_mask;
 #endif
 
 #define cpu_context(cpu, mm)	((mm)->context.asid[cpu])
-#define cpu_asid(cpu, mm)	ASID_MASK(cpu_context((cpu), (mm)))
+#define cpu_asid(cpu, mm)	(cpu_context((cpu), (mm)) & ASID_MASK)
 #define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
 
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
 }
 
+/*
+ *  All unused by hardware upper bits will be considered
+ *  as a software asid extension.
+ */
+#define ASID_VERSION_MASK  ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
+#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
+
 #ifndef CONFIG_MIPS_MT_SMTC
 /* Normal, classic MIPS get_new_mmu_context */
 static inline void
@@ -137,7 +114,7 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 	extern void kvm_local_flush_tlb_all(void);
 	unsigned long asid = asid_cache(cpu);
 
-	if (!ASID_MASK((asid = ASID_INC(asid)))) {
+	if (! ((asid += ASID_INC) & ASID_MASK) ) {
 		if (cpu_has_vtag_icache)
 			flush_icache_all();
 #ifdef CONFIG_VIRTUALIZATION
@@ -200,7 +177,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 * free up the ASID value for use and flush any old
 	 * instances of it from the TLB.
 	 */
-	oldasid = ASID_MASK(read_c0_entryhi());
+	oldasid = (read_c0_entryhi() & ASID_MASK);
 	if(smtc_live_asid[mytlb][oldasid]) {
 		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
 		if(smtc_live_asid[mytlb][oldasid] == 0)
@@ -211,7 +188,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 * having ASID_MASK smaller than the hardware maximum,
 	 * make sure no "soft" bits become "hard"...
 	 */
-	write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) |
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
 			 cpu_asid(cpu, next));
 	ehb(); /* Make sure it propagates to TCStatus */
 	evpe(mtflags);
@@ -264,15 +241,15 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next)
 #ifdef CONFIG_MIPS_MT_SMTC
 	/* See comments for similar code above */
 	mtflags = dvpe();
-	oldasid = ASID_MASK(read_c0_entryhi());
+	oldasid = read_c0_entryhi() & ASID_MASK;
 	if(smtc_live_asid[mytlb][oldasid]) {
 		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
 		if(smtc_live_asid[mytlb][oldasid] == 0)
 			 smtc_flush_tlb_asid(oldasid);
 	}
 	/* See comments for similar code above */
-	write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) |
-	                 cpu_asid(cpu, next));
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
+			 cpu_asid(cpu, next));
 	ehb(); /* Make sure it propagates to TCStatus */
 	evpe(mtflags);
 #else
@@ -309,14 +286,14 @@ drop_mmu_context(struct mm_struct *mm, unsigned cpu)
 #ifdef CONFIG_MIPS_MT_SMTC
 		/* See comments for similar code above */
 		prevvpe = dvpe();
-		oldasid = ASID_MASK(read_c0_entryhi());
+		oldasid = (read_c0_entryhi() & ASID_MASK);
 		if (smtc_live_asid[mytlb][oldasid]) {
 			smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
 			if(smtc_live_asid[mytlb][oldasid] == 0)
 				smtc_flush_tlb_asid(oldasid);
 		}
 		/* See comments for similar code above */
-		write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK)
+		write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
 				| cpu_asid(cpu, mm));
 		ehb(); /* Make sure it propagates to TCStatus */
 		evpe(prevvpe);

arch/mips/include/asm/page.h

@@ -46,7 +46,6 @@
 #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
 
 #include <linux/pfn.h>
-#include <asm/io.h>
 
 extern void build_clear_page(void);
 extern void build_copy_page(void);
@@ -151,6 +150,7 @@ typedef struct { unsigned long pgprot; } pgprot_t;
     ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
 #endif
 #define __va(x)		((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+#include <asm/io.h>
 
 /*
  * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad
@@ -171,14 +171,13 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 #ifdef CONFIG_FLATMEM
 
-#define pfn_valid(pfn)							\
-({									\
-	unsigned long __pfn = (pfn);					\
-	/* avoid <linux/bootmem.h> include hell */			\
-	extern unsigned long min_low_pfn;				\
-									\
-	__pfn >= min_low_pfn && __pfn < max_mapnr;			\
-})
+static inline int pfn_valid(unsigned long pfn)
+{
+	/* avoid <linux/mm.h> include hell */
+	extern unsigned long max_mapnr;
+
+	return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr;
+}
 
 #elif defined(CONFIG_SPARSEMEM)
 

arch/mips/include/asm/processor.h

@@ -28,7 +28,6 @@
 /*
  * System setup and hardware flags..
  */
-extern void (*cpu_wait)(void);
 
 extern unsigned int vced_count, vcei_count;
 

arch/mips/include/uapi/asm/unistd.h

@@ -694,16 +694,17 @@
 #define __NR_process_vm_writev		(__NR_Linux + 305)
 #define __NR_kcmp			(__NR_Linux + 306)
 #define __NR_finit_module		(__NR_Linux + 307)
+#define __NR_getdents64			(__NR_Linux + 308)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		307
+#define __NR_Linux_syscalls		308
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		307
+#define __NR_64_Linux_syscalls		308
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 

arch/mips/kernel/Makefile

@@ -4,7 +4,7 @@
 
 extra-y		:= head.o vmlinux.lds
 
-obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
+obj-y		+= cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
 		   prom.o ptrace.o reset.o setup.o signal.o syscall.o \
 		   time.o topology.o traps.o unaligned.o watch.o vdso.o
 

arch/mips/kernel/cpu-probe.c

@@ -27,105 +27,6 @@
 #include <asm/spram.h>
 #include <asm/uaccess.h>
 
-/*
- * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
- * the implementation of the "wait" feature differs between CPU families. This
- * points to the function that implements CPU specific wait.
- * The wait instruction stops the pipeline and reduces the power consumption of
- * the CPU very much.
- */
-void (*cpu_wait)(void);
-EXPORT_SYMBOL(cpu_wait);
-
-static void r3081_wait(void)
-{
-	unsigned long cfg = read_c0_conf();
-	write_c0_conf(cfg | R30XX_CONF_HALT);
-}
-
-static void r39xx_wait(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
-	local_irq_enable();
-}
-
-extern void r4k_wait(void);
-
-/*
- * This variant is preferable as it allows testing need_resched and going to
- * sleep depending on the outcome atomically.  Unfortunately the "It is
- * implementation-dependent whether the pipeline restarts when a non-enabled
- * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
- * using this version a gamble.
- */
-void r4k_wait_irqoff(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		__asm__("	.set	push		\n"
-			"	.set	mips3		\n"
-			"	wait			\n"
-			"	.set	pop		\n");
-	local_irq_enable();
-	__asm__("	.globl __pastwait	\n"
-		"__pastwait:			\n");
-}
-
-/*
- * The RM7000 variant has to handle erratum 38.	 The workaround is to not
- * have any pending stores when the WAIT instruction is executed.
- */
-static void rm7k_wait_irqoff(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		__asm__(
-		"	.set	push					\n"
-		"	.set	mips3					\n"
-		"	.set	noat					\n"
-		"	mfc0	$1, $12					\n"
-		"	sync						\n"
-		"	mtc0	$1, $12		# stalls until W stage	\n"
-		"	wait						\n"
-		"	mtc0	$1, $12		# stalls until W stage	\n"
-		"	.set	pop					\n");
-	local_irq_enable();
-}
-
-/*
- * The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter.
- * alchemy/common/time.c may override cpu_wait!
- */
-static void au1k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	cache	0x14, 0(%0)		\n"
-		"	cache	0x14, 32(%0)		\n"
-		"	sync				\n"
-		"	nop				\n"
-		"	wait				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	.set	mips0			\n"
-		: : "r" (au1k_wait));
-}
-
-static int __initdata nowait;
-
-static int __init wait_disable(char *s)
-{
-	nowait = 1;
-
-	return 1;
-}
-
-__setup("nowait", wait_disable);
-
 static int __cpuinitdata mips_fpu_disabled;
 
 static int __init fpu_disable(char *s)
@@ -150,105 +51,6 @@ static int __init dsp_disable(char *s)
 
 __setup("nodsp", dsp_disable);
 
-void __init check_wait(void)
-{
-	struct cpuinfo_mips *c = &current_cpu_data;
-
-	if (nowait) {
-		printk("Wait instruction disabled.\n");
-		return;
-	}
-
-	switch (c->cputype) {
-	case CPU_R3081:
-	case CPU_R3081E:
-		cpu_wait = r3081_wait;
-		break;
-	case CPU_TX3927:
-		cpu_wait = r39xx_wait;
-		break;
-	case CPU_R4200:
-/*	case CPU_R4300: */
-	case CPU_R4600:
-	case CPU_R4640:
-	case CPU_R4650:
-	case CPU_R4700:
-	case CPU_R5000:
-	case CPU_R5500:
-	case CPU_NEVADA:
-	case CPU_4KC:
-	case CPU_4KEC:
-	case CPU_4KSC:
-	case CPU_5KC:
-	case CPU_25KF:
-	case CPU_PR4450:
-	case CPU_BMIPS3300:
-	case CPU_BMIPS4350:
-	case CPU_BMIPS4380:
-	case CPU_BMIPS5000:
-	case CPU_CAVIUM_OCTEON:
-	case CPU_CAVIUM_OCTEON_PLUS:
-	case CPU_CAVIUM_OCTEON2:
-	case CPU_JZRISC:
-	case CPU_LOONGSON1:
-	case CPU_XLR:
-	case CPU_XLP:
-		cpu_wait = r4k_wait;
-		break;
-
-	case CPU_RM7000:
-		cpu_wait = rm7k_wait_irqoff;
-		break;
-
-	case CPU_M14KC:
-	case CPU_M14KEC:
-	case CPU_24K:
-	case CPU_34K:
-	case CPU_1004K:
-		cpu_wait = r4k_wait;
-		if (read_c0_config7() & MIPS_CONF7_WII)
-			cpu_wait = r4k_wait_irqoff;
-		break;
-
-	case CPU_74K:
-		cpu_wait = r4k_wait;
-		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
-			cpu_wait = r4k_wait_irqoff;
-		break;
-
-	case CPU_TX49XX:
-		cpu_wait = r4k_wait_irqoff;
-		break;
-	case CPU_ALCHEMY:
-		cpu_wait = au1k_wait;
-		break;
-	case CPU_20KC:
-		/*
-		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
-		 * WAIT on Rev2.0 and Rev3.0 has E16.
-		 * Rev3.1 WAIT is nop, why bother
-		 */
-		if ((c->processor_id & 0xff) <= 0x64)
-			break;
-
-		/*
-		 * Another rev is incremeting c0_count at a reduced clock
-		 * rate while in WAIT mode.  So we basically have the choice
-		 * between using the cp0 timer as clocksource or avoiding
-		 * the WAIT instruction.  Until more details are known,
-		 * disable the use of WAIT for 20Kc entirely.
-		   cpu_wait = r4k_wait;
-		 */
-		break;
-	case CPU_RM9000:
-		if ((c->processor_id & 0x00ff) >= 0x40)
-			cpu_wait = r4k_wait;
-		break;
-	default:
-		break;
-	}
-}
-
 static inline void check_errata(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;

arch/mips/kernel/crash_dump.c

@@ -2,6 +2,7 @@
 #include <linux/bootmem.h>
 #include <linux/crash_dump.h>
 #include <asm/uaccess.h>
+#include <linux/slab.h>
 
 static int __init parse_savemaxmem(char *p)
 {

arch/mips/kernel/genex.S

@@ -122,7 +122,7 @@ handle_vcei:
 	__FINIT
 
 	.align	5	/* 32 byte rollback region */
-LEAF(r4k_wait)
+LEAF(__r4k_wait)
 	.set	push
 	.set	noreorder
 	/* start of rollback region */
@@ -146,14 +146,14 @@ LEAF(r4k_wait)
 	jr	ra
 	nop
 	.set	pop
-	END(r4k_wait)
+	END(__r4k_wait)
 
 	.macro	BUILD_ROLLBACK_PROLOGUE handler
 	FEXPORT(rollback_\handler)
 	.set	push
 	.set	noat
 	MFC0	k0, CP0_EPC
-	PTR_LA	k1, r4k_wait
+	PTR_LA	k1, __r4k_wait
 	ori	k0, 0x1f	/* 32 byte rollback region */
 	xori	k0, 0x1f
 	bne	k0, k1, 9f
@@ -493,7 +493,7 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.set	noreorder
 	/* check if TLB contains a entry for EPC */
 	MFC0	k1, CP0_ENTRYHI
-	andi	k1, 0xff	/* ASID_MASK patched at run-time!! */
+	andi	k1, 0xff	/* ASID_MASK */
 	MFC0	k0, CP0_EPC
 	PTR_SRL k0, _PAGE_SHIFT + 1
 	PTR_SLL k0, _PAGE_SHIFT + 1

arch/mips/kernel/idle.c

@@ -0,0 +1,244 @@
+/*
+ * MIPS idle loop and WAIT instruction support.
+ *
+ * Copyright (C) xxxx  the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/printk.h>
+#include <linux/sched.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/idle.h>
+#include <asm/mipsregs.h>
+
+/*
+ * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
+ * the implementation of the "wait" feature differs between CPU families. This
+ * points to the function that implements CPU specific wait.
+ * The wait instruction stops the pipeline and reduces the power consumption of
+ * the CPU very much.
+ */
+void (*cpu_wait)(void);
+EXPORT_SYMBOL(cpu_wait);
+
+static void r3081_wait(void)
+{
+	unsigned long cfg = read_c0_conf();
+	write_c0_conf(cfg | R30XX_CONF_HALT);
+	local_irq_enable();
+}
+
+static void r39xx_wait(void)
+{
+	if (!need_resched())
+		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+	local_irq_enable();
+}
+
+void r4k_wait(void)
+{
+	local_irq_enable();
+	__r4k_wait();
+}
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically.  Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+void r4k_wait_irqoff(void)
+{
+	if (!need_resched())
+		__asm__(
+		"	.set	push		\n"
+		"	.set	mips3		\n"
+		"	wait			\n"
+		"	.set	pop		\n");
+	local_irq_enable();
+	__asm__(
+	"	.globl __pastwait	\n"
+	"__pastwait:			\n");
+}
+
+/*
+ * The RM7000 variant has to handle erratum 38.	 The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+	if (!need_resched())
+		__asm__(
+		"	.set	push					\n"
+		"	.set	mips3					\n"
+		"	.set	noat					\n"
+		"	mfc0	$1, $12					\n"
+		"	sync						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	wait						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	.set	pop					\n");
+	local_irq_enable();
+}
+
+/*
+ * The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter.
+ * alchemy/common/time.c may override cpu_wait!
+ */
+static void au1k_wait(void)
+{
+	__asm__(
+	"	.set	mips3			\n"
+	"	cache	0x14, 0(%0)		\n"
+	"	cache	0x14, 32(%0)		\n"
+	"	sync				\n"
+	"	nop				\n"
+	"	wait				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	nop				\n"
+	"	.set	mips0			\n"
+	: : "r" (au1k_wait));
+	local_irq_enable();
+}
+
+static int __initdata nowait;
+
+static int __init wait_disable(char *s)
+{
+	nowait = 1;
+
+	return 1;
+}
+
+__setup("nowait", wait_disable);
+
+void __init check_wait(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	if (nowait) {
+		printk("Wait instruction disabled.\n");
+		return;
+	}
+
+	switch (c->cputype) {
+	case CPU_R3081:
+	case CPU_R3081E:
+		cpu_wait = r3081_wait;
+		break;
+	case CPU_TX3927:
+		cpu_wait = r39xx_wait;
+		break;
+	case CPU_R4200:
+/*	case CPU_R4300: */
+	case CPU_R4600:
+	case CPU_R4640:
+	case CPU_R4650:
+	case CPU_R4700:
+	case CPU_R5000:
+	case CPU_R5500:
+	case CPU_NEVADA:
+	case CPU_4KC:
+	case CPU_4KEC:
+	case CPU_4KSC:
+	case CPU_5KC:
+	case CPU_25KF:
+	case CPU_PR4450:
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+	case CPU_BMIPS5000:
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+	case CPU_JZRISC:
+	case CPU_LOONGSON1:
+	case CPU_XLR:
+	case CPU_XLP:
+		cpu_wait = r4k_wait;
+		break;
+
+	case CPU_RM7000:
+		cpu_wait = rm7k_wait_irqoff;
+		break;
+
+	case CPU_M14KC:
+	case CPU_M14KEC:
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_1004K:
+		cpu_wait = r4k_wait;
+		if (read_c0_config7() & MIPS_CONF7_WII)
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_74K:
+		cpu_wait = r4k_wait;
+		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_TX49XX:
+		cpu_wait = r4k_wait_irqoff;
+		break;
+	case CPU_ALCHEMY:
+		cpu_wait = au1k_wait;
+		break;
+	case CPU_20KC:
+		/*
+		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
+		 * WAIT on Rev2.0 and Rev3.0 has E16.
+		 * Rev3.1 WAIT is nop, why bother
+		 */
+		if ((c->processor_id & 0xff) <= 0x64)
+			break;
+
+		/*
+		 * Another rev is incremeting c0_count at a reduced clock
+		 * rate while in WAIT mode.  So we basically have the choice
+		 * between using the cp0 timer as clocksource or avoiding
+		 * the WAIT instruction.  Until more details are known,
+		 * disable the use of WAIT for 20Kc entirely.
+		   cpu_wait = r4k_wait;
+		 */
+		break;
+	case CPU_RM9000:
+		if ((c->processor_id & 0x00ff) >= 0x40)
+			cpu_wait = r4k_wait;
+		break;
+	default:
+		break;
+	}
+}
+
+static void smtc_idle_hook(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_idle_loop_hook(void);
+
+	smtc_idle_loop_hook();
+#endif
+}
+
+void arch_cpu_idle(void)
+{
+	smtc_idle_hook();
+	if (cpu_wait)
+		cpu_wait();
+	else
+		local_irq_enable();
+}

arch/mips/kernel/kprobes.c

@@ -207,7 +207,10 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
-	free_insn_slot(p->ainsn.insn, 0);
+	if (p->ainsn.insn) {
+		free_insn_slot(p->ainsn.insn, 0);
+		p->ainsn.insn = NULL;
+	}
 }
 
 static void save_previous_kprobe(struct kprobe_ctlblk *kcb)

arch/mips/kernel/proc.c

@@ -10,6 +10,7 @@
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/idle.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
 #include <asm/prom.h>

arch/mips/kernel/process.c

@@ -51,19 +51,6 @@ void arch_cpu_idle_dead(void)
 }
 #endif
 
-void arch_cpu_idle(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-	extern void smtc_idle_loop_hook(void);
-
-	smtc_idle_loop_hook();
-#endif
-	if (cpu_wait)
-		(*cpu_wait)();
-	else
-		local_irq_enable();
-}
-
 asmlinkage void ret_from_fork(void);
 asmlinkage void ret_from_kernel_thread(void);
 
@@ -224,6 +211,9 @@ struct mips_frame_info {
 	int		pc_offset;
 };
 
+#define J_TARGET(pc,target)	\
+		(((unsigned long)(pc) & 0xf0000000) | ((target) << 2))
+
 static inline int is_ra_save_ins(union mips_instruction *ip)
 {
 #ifdef CONFIG_CPU_MICROMIPS
@@ -264,7 +254,7 @@ static inline int is_ra_save_ins(union mips_instruction *ip)
 #endif
 }
 
-static inline int is_jal_jalr_jr_ins(union mips_instruction *ip)
+static inline int is_jump_ins(union mips_instruction *ip)
 {
 #ifdef CONFIG_CPU_MICROMIPS
 	/*
@@ -288,6 +278,8 @@ static inline int is_jal_jalr_jr_ins(union mips_instruction *ip)
 		return 0;
 	return (((ip->u_format.uimmediate >> 6) & mm_jalr_op) == mm_jalr_op);
 #else
+	if (ip->j_format.opcode == j_op)
+		return 1;
 	if (ip->j_format.opcode == jal_op)
 		return 1;
 	if (ip->r_format.opcode != spec_op)
@@ -350,7 +342,7 @@ static int get_frame_info(struct mips_frame_info *info)
 
 	for (i = 0; i < max_insns; i++, ip++) {
 
-		if (is_jal_jalr_jr_ins(ip))
+		if (is_jump_ins(ip))
 			break;
 		if (!info->frame_size) {
 			if (is_sp_move_ins(ip))
@@ -393,15 +385,42 @@ err:
 
 static struct mips_frame_info schedule_mfi __read_mostly;
 
+#ifdef CONFIG_KALLSYMS
+static unsigned long get___schedule_addr(void)
+{
+	return kallsyms_lookup_name("__schedule");
+}
+#else
+static unsigned long get___schedule_addr(void)
+{
+	union mips_instruction *ip = (void *)schedule;
+	int max_insns = 8;
+	int i;
+
+	for (i = 0; i < max_insns; i++, ip++) {
+		if (ip->j_format.opcode == j_op)
+			return J_TARGET(ip, ip->j_format.target);
+	}
+	return 0;
+}
+#endif
+
 static int __init frame_info_init(void)
 {
 	unsigned long size = 0;
 #ifdef CONFIG_KALLSYMS
 	unsigned long ofs;
-
-	kallsyms_lookup_size_offset((unsigned long)schedule, &size, &ofs);
 #endif
-	schedule_mfi.func = schedule;
+	unsigned long addr;
+
+	addr = get___schedule_addr();
+	if (!addr)
+		addr = (unsigned long)schedule;
+
+#ifdef CONFIG_KALLSYMS
+	kallsyms_lookup_size_offset(addr, &size, &ofs);
+#endif
+	schedule_mfi.func = (void *)addr;
 	schedule_mfi.func_size = size;
 
 	get_frame_info(&schedule_mfi);

arch/mips/kernel/scall64-64.S

@@ -423,4 +423,5 @@ sys_call_table:
 	PTR	sys_process_vm_writev		/* 5305 */
 	PTR	sys_kcmp
 	PTR	sys_finit_module
+	PTR	sys_getdents64
 	.size	sys_call_table,.-sys_call_table

arch/mips/kernel/smp.c

@@ -37,6 +37,7 @@
 #include <linux/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
+#include <asm/idle.h>
 #include <asm/r4k-timer.h>
 #include <asm/mmu_context.h>
 #include <asm/time.h>

arch/mips/kernel/smtc.c

@@ -34,6 +34,7 @@
 #include <asm/hardirq.h>
 #include <asm/hazards.h>
 #include <asm/irq.h>
+#include <asm/idle.h>
 #include <asm/mmu_context.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheflush.h>
@@ -111,7 +112,7 @@ static int vpe0limit;
 static int ipibuffers;
 static int nostlb;
 static int asidmask;
-unsigned int smtc_asid_mask = 0xff;
+unsigned long smtc_asid_mask = 0xff;
 
 static int __init vpe0tcs(char *str)
 {
@@ -858,7 +859,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	unsigned long flags;
 	int mtflags;
 	unsigned long tcrestart;
-	extern void r4k_wait_irqoff(void), __pastwait(void);
 	int set_resched_flag = (type == LINUX_SMP_IPI &&
 				action == SMP_RESCHEDULE_YOURSELF);
 
@@ -914,8 +914,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 			 */
 			if (cpu_wait == r4k_wait_irqoff) {
 				tcrestart = read_tc_c0_tcrestart();
-				if (tcrestart >= (unsigned long)r4k_wait_irqoff
-				    && tcrestart < (unsigned long)__pastwait) {
+				if (address_is_in_r4k_wait_irqoff(tcrestart)) {
 					write_tc_c0_tcrestart(__pastwait);
 					tcstatus &= ~TCSTATUS_IXMT;
 					write_tc_c0_tcstatus(tcstatus);
@@ -1395,7 +1394,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 	asid = asid_cache(cpu);
 
 	do {
-		if (!ASID_MASK(ASID_INC(asid))) {
+		if (!((asid += ASID_INC) & ASID_MASK) ) {
 			if (cpu_has_vtag_icache)
 				flush_icache_all();
 			/* Traverse all online CPUs (hack requires contiguous range) */
@@ -1414,7 +1413,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 						mips_ihb();
 					}
 					tcstat = read_tc_c0_tcstatus();
-					smtc_live_asid[tlb][ASID_MASK(tcstat)] |= (asiduse)(0x1 << i);
+					smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i);
 					if (!prevhalt)
 						write_tc_c0_tchalt(0);
 				}
@@ -1423,7 +1422,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 				asid = ASID_FIRST_VERSION;
 			local_flush_tlb_all();	/* start new asid cycle */
 		}
-	} while (smtc_live_asid[tlb][ASID_MASK(asid)]);
+	} while (smtc_live_asid[tlb][(asid & ASID_MASK)]);
 
 	/*
 	 * SMTC shares the TLB within VPEs and possibly across all VPEs.
@@ -1461,7 +1460,7 @@ void smtc_flush_tlb_asid(unsigned long asid)
 		tlb_read();
 		ehb();
 		ehi = read_c0_entryhi();
-		if (ASID_MASK(ehi) == asid) {
+		if ((ehi & ASID_MASK) == asid) {
 		    /*
 		     * Invalidate only entries with specified ASID,
 		     * makiing sure all entries differ.

arch/mips/kernel/traps.c

@@ -41,6 +41,7 @@
 #include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
+#include <asm/idle.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/module.h>
@@ -57,7 +58,6 @@
 #include <asm/uasm.h>
 
 extern void check_wait(void);
-extern asmlinkage void r4k_wait(void);
 extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern u32 handle_tlbl[];
@@ -1542,7 +1542,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
 		extern char rollback_except_vec_vi;
-		char *vec_start = (cpu_wait == r4k_wait) ?
+		char *vec_start = using_rollback_handler() ?
 			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
@@ -1656,7 +1656,6 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
 	unsigned int cpu = smp_processor_id();
 	unsigned int status_set = ST0_CU0;
 	unsigned int hwrena = cpu_hwrena_impl_bits;
-	unsigned long asid = 0;
 #ifdef CONFIG_MIPS_MT_SMTC
 	int secondaryTC = 0;
 	int bootTC = (cpu == 0);
@@ -1740,9 +1739,8 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
 	}
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	asid = ASID_FIRST_VERSION;
-	cpu_data[cpu].asid_cache = asid;
-	TLBMISS_HANDLER_SETUP();
+	if (!cpu_data[cpu].asid_cache)
+		cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
@@ -1814,10 +1812,8 @@ void __init trap_init(void)
 	extern char except_vec4;
 	extern char except_vec3_r4000;
 	unsigned long i;
-	int rollback;
 
 	check_wait();
-	rollback = (cpu_wait == r4k_wait);
 
 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
@@ -1894,7 +1890,8 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
+	set_except_vector(0, using_rollback_handler() ? rollback_handle_int
+						      : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);

arch/mips/kvm/kvm_mips_emul.c

@@ -525,16 +525,18 @@ kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc, uint32_t cause,
 				printk("MTCz, cop0->reg[EBASE]: %#lx\n",
 				       kvm_read_c0_guest_ebase(cop0));
 			} else if (rd == MIPS_CP0_TLB_HI && sel == 0) {
-				uint32_t nasid = ASID_MASK(vcpu->arch.gprs[rt]);
+				uint32_t nasid =
+				    vcpu->arch.gprs[rt] & ASID_MASK;
 				if ((KSEGX(vcpu->arch.gprs[rt]) != CKSEG0)
 				    &&
-				    (ASID_MASK(kvm_read_c0_guest_entryhi(cop0))
-				      != nasid)) {
+				    ((kvm_read_c0_guest_entryhi(cop0) &
+				      ASID_MASK) != nasid)) {
 
 					kvm_debug
 					    ("MTCz, change ASID from %#lx to %#lx\n",
-					     ASID_MASK(kvm_read_c0_guest_entryhi(cop0)),
-					     ASID_MASK(vcpu->arch.gprs[rt]));
+					     kvm_read_c0_guest_entryhi(cop0) &
+					     ASID_MASK,
+					     vcpu->arch.gprs[rt] & ASID_MASK);
 
 					/* Blow away the shadow host TLBs */
 					kvm_mips_flush_host_tlb(1);
@@ -986,7 +988,8 @@ kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc, uint32_t cause,
 		 * resulting handler will do the right thing
 		 */
 		index = kvm_mips_guest_tlb_lookup(vcpu, (va & VPN2_MASK) |
-						  ASID_MASK(kvm_read_c0_guest_entryhi(cop0)));
+						  (kvm_read_c0_guest_entryhi
+						   (cop0) & ASID_MASK));
 
 		if (index < 0) {
 			vcpu->arch.host_cp0_entryhi = (va & VPN2_MASK);
@@ -1151,7 +1154,7 @@ kvm_mips_emulate_tlbmiss_ld(unsigned long cause, uint32_t *opc,
 	struct kvm_vcpu_arch *arch = &vcpu->arch;
 	enum emulation_result er = EMULATE_DONE;
 	unsigned long entryhi = (vcpu->arch.  host_cp0_badvaddr & VPN2_MASK) |
-				ASID_MASK(kvm_read_c0_guest_entryhi(cop0));
+				(kvm_read_c0_guest_entryhi(cop0) & ASID_MASK);
 
 	if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) {
 		/* save old pc */
@@ -1198,7 +1201,7 @@ kvm_mips_emulate_tlbinv_ld(unsigned long cause, uint32_t *opc,
 	enum emulation_result er = EMULATE_DONE;
 	unsigned long entryhi =
 		(vcpu->arch.host_cp0_badvaddr & VPN2_MASK) |
-		ASID_MASK(kvm_read_c0_guest_entryhi(cop0));
+		(kvm_read_c0_guest_entryhi(cop0) & ASID_MASK);
 
 	if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) {
 		/* save old pc */
@@ -1243,7 +1246,7 @@ kvm_mips_emulate_tlbmiss_st(unsigned long cause, uint32_t *opc,
 	struct kvm_vcpu_arch *arch = &vcpu->arch;
 	enum emulation_result er = EMULATE_DONE;
 	unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) |
-				ASID_MASK(kvm_read_c0_guest_entryhi(cop0));
+				(kvm_read_c0_guest_entryhi(cop0) & ASID_MASK);
 
 	if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) {
 		/* save old pc */
@@ -1287,7 +1290,7 @@ kvm_mips_emulate_tlbinv_st(unsigned long cause, uint32_t *opc,
 	struct kvm_vcpu_arch *arch = &vcpu->arch;
 	enum emulation_result er = EMULATE_DONE;
 	unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) |
-		ASID_MASK(kvm_read_c0_guest_entryhi(cop0));
+		(kvm_read_c0_guest_entryhi(cop0) & ASID_MASK);
 
 	if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) {
 		/* save old pc */
@@ -1356,7 +1359,7 @@ kvm_mips_emulate_tlbmod(unsigned long cause, uint32_t *opc,
 {
 	struct mips_coproc *cop0 = vcpu->arch.cop0;
 	unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) |
-				ASID_MASK(kvm_read_c0_guest_entryhi(cop0));
+				(kvm_read_c0_guest_entryhi(cop0) & ASID_MASK);
 	struct kvm_vcpu_arch *arch = &vcpu->arch;
 	enum emulation_result er = EMULATE_DONE;
 
@@ -1783,8 +1786,8 @@ kvm_mips_handle_tlbmiss(unsigned long cause, uint32_t *opc,
 	 */
 	index = kvm_mips_guest_tlb_lookup(vcpu,
 					  (va & VPN2_MASK) |
-					  ASID_MASK(kvm_read_c0_guest_entryhi
-					   (vcpu->arch.cop0)));
+					  (kvm_read_c0_guest_entryhi
+					   (vcpu->arch.cop0) & ASID_MASK));
 	if (index < 0) {
 		if (exccode == T_TLB_LD_MISS) {
 			er = kvm_mips_emulate_tlbmiss_ld(cause, opc, run, vcpu);

arch/mips/kvm/kvm_tlb.c

@@ -17,6 +17,8 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/kvm_host.h>
+#include <linux/srcu.h>
+
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
@@ -51,13 +53,13 @@ EXPORT_SYMBOL(kvm_mips_is_error_pfn);
 
 uint32_t kvm_mips_get_kernel_asid(struct kvm_vcpu *vcpu)
 {
-	return ASID_MASK(vcpu->arch.guest_kernel_asid[smp_processor_id()]);
+	return vcpu->arch.guest_kernel_asid[smp_processor_id()] & ASID_MASK;
 }
 
 
 uint32_t kvm_mips_get_user_asid(struct kvm_vcpu *vcpu)
 {
-	return ASID_MASK(vcpu->arch.guest_user_asid[smp_processor_id()]);
+	return vcpu->arch.guest_user_asid[smp_processor_id()] & ASID_MASK;
 }
 
 inline uint32_t kvm_mips_get_commpage_asid (struct kvm_vcpu *vcpu)
@@ -84,7 +86,7 @@ void kvm_mips_dump_host_tlbs(void)
 	old_pagemask = read_c0_pagemask();
 
 	printk("HOST TLBs:\n");
-	printk("ASID: %#lx\n", ASID_MASK(read_c0_entryhi()));
+	printk("ASID: %#lx\n", read_c0_entryhi() & ASID_MASK);
 
 	for (i = 0; i < current_cpu_data.tlbsize; i++) {
 		write_c0_index(i);
@@ -169,21 +171,27 @@ void kvm_mips_dump_shadow_tlbs(struct kvm_vcpu *vcpu)
 	}
 }
 
-static void kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
+static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
 {
+	int srcu_idx, err = 0;
 	pfn_t pfn;
 
 	if (kvm->arch.guest_pmap[gfn] != KVM_INVALID_PAGE)
-		return;
+		return 0;
 
+        srcu_idx = srcu_read_lock(&kvm->srcu);
 	pfn = kvm_mips_gfn_to_pfn(kvm, gfn);
 
 	if (kvm_mips_is_error_pfn(pfn)) {
-		panic("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn);
+		kvm_err("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn);
+		err = -EFAULT;
+		goto out;
 	}
 
 	kvm->arch.guest_pmap[gfn] = pfn;
-	return;
+out:
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+	return err;
 }
 
 /* Translate guest KSEG0 addresses to Host PA */
@@ -207,7 +215,10 @@ unsigned long kvm_mips_translate_guest_kseg0_to_hpa(struct kvm_vcpu *vcpu,
 			gva);
 		return KVM_INVALID_PAGE;
 	}
-	kvm_mips_map_page(vcpu->kvm, gfn);
+
+	if (kvm_mips_map_page(vcpu->kvm, gfn) < 0)
+		return KVM_INVALID_ADDR;
+
 	return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset;
 }
 
@@ -310,8 +321,11 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr,
 	even = !(gfn & 0x1);
 	vaddr = badvaddr & (PAGE_MASK << 1);
 
-	kvm_mips_map_page(vcpu->kvm, gfn);
-	kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1);
+	if (kvm_mips_map_page(vcpu->kvm, gfn) < 0)
+		return -1;
+
+	if (kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1) < 0)
+		return -1;
 
 	if (even) {
 		pfn0 = kvm->arch.guest_pmap[gfn];
@@ -389,8 +403,11 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 		pfn0 = 0;
 		pfn1 = 0;
 	} else {
-		kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT);
-		kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT);
+		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT) < 0)
+			return -1;
+
+		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT) < 0)
+			return -1;
 
 		pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT];
 		pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT];
@@ -428,7 +445,7 @@ int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi)
 
 	for (i = 0; i < KVM_MIPS_GUEST_TLB_SIZE; i++) {
 		if (((TLB_VPN2(tlb[i]) & ~tlb[i].tlb_mask) == ((entryhi & VPN2_MASK) & ~tlb[i].tlb_mask)) &&
-			(TLB_IS_GLOBAL(tlb[i]) || (TLB_ASID(tlb[i]) == ASID_MASK(entryhi)))) {
+			(TLB_IS_GLOBAL(tlb[i]) || (TLB_ASID(tlb[i]) == (entryhi & ASID_MASK)))) {
 			index = i;
 			break;
 		}
@@ -626,7 +643,7 @@ kvm_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu,
 {
 	unsigned long asid = asid_cache(cpu);
 
-	if (!(ASID_MASK(ASID_INC(asid)))) {
+	if (!((asid += ASID_INC) & ASID_MASK)) {
 		if (cpu_has_vtag_icache) {
 			flush_icache_all();
 		}
@@ -804,7 +821,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	if (!newasid) {
 		/* If we preempted while the guest was executing, then reload the pre-empted ASID */
 		if (current->flags & PF_VCPU) {
-			write_c0_entryhi(ASID_MASK(vcpu->arch.preempt_entryhi));
+			write_c0_entryhi(vcpu->arch.
+					 preempt_entryhi & ASID_MASK);
 			ehb();
 		}
 	} else {
@@ -816,11 +834,13 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		 */
 		if (current->flags & PF_VCPU) {
 			if (KVM_GUEST_KERNEL_MODE(vcpu))
-				write_c0_entryhi(ASID_MASK(vcpu->arch.
-						 guest_kernel_asid[cpu]));
+				write_c0_entryhi(vcpu->arch.
+						 guest_kernel_asid[cpu] &
+						 ASID_MASK);
 			else
-				write_c0_entryhi(ASID_MASK(vcpu->arch.
-						 guest_user_asid[cpu]));
+				write_c0_entryhi(vcpu->arch.
+						 guest_user_asid[cpu] &
+						 ASID_MASK);
 			ehb();
 		}
 	}
@@ -879,7 +899,8 @@ uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu)
 			    kvm_mips_guest_tlb_lookup(vcpu,
 						      ((unsigned long) opc & VPN2_MASK)
 						      |
-						      ASID_MASK(kvm_read_c0_guest_entryhi(cop0)));
+						      (kvm_read_c0_guest_entryhi
+						       (cop0) & ASID_MASK));
 			if (index < 0) {
 				kvm_err
 				    ("%s: get_user_failed for %p, vcpu: %p, ASID: %#lx\n",

arch/mips/lantiq/xway/gptu.c

@@ -144,10 +144,6 @@ static int gptu_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get resource\n");
-		return -ENOMEM;
-	}
 
 	/* remap gptu register range */
 	gptu_membase = devm_ioremap_resource(&pdev->dev, res);
@@ -169,6 +165,8 @@ static int gptu_probe(struct platform_device *pdev)
 	if (((gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) {
 		dev_err(&pdev->dev, "Failed to find magic\n");
 		gptu_hwexit();
+		clk_disable(clk);
+		clk_put(clk);
 		return -ENAVAIL;
 	}
 

arch/mips/lib/dump_tlb.c

@@ -11,7 +11,6 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/tlbdebug.h>
-#include <asm/mmu_context.h>
 
 static inline const char *msk2str(unsigned int mask)
 {
@@ -56,7 +55,7 @@ static void dump_tlb(int first, int last)
 	s_pagemask = read_c0_pagemask();
 	s_entryhi = read_c0_entryhi();
 	s_index = read_c0_index();
-	asid = ASID_MASK(s_entryhi);
+	asid = s_entryhi & 0xff;
 
 	for (i = first; i <= last; i++) {
 		write_c0_index(i);
@@ -86,7 +85,7 @@ static void dump_tlb(int first, int last)
 
 			printk("va=%0*lx asid=%02lx\n",
 			       width, (entryhi & ~0x1fffUL),
-			       ASID_MASK(entryhi));
+			       entryhi & 0xff);
 			printk("\t[pa=%0*llx c=%d d=%d v=%d g=%d] ",
 			       width,
 			       (entrylo0 << 6) & PAGE_MASK, c0,

arch/mips/lib/r3k_dump_tlb.c

@@ -9,7 +9,6 @@
 #include <linux/mm.h>
 
 #include <asm/mipsregs.h>
-#include <asm/mmu_context.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/tlbdebug.h>
@@ -22,7 +21,7 @@ static void dump_tlb(int first, int last)
 	unsigned int asid;
 	unsigned long entryhi, entrylo0;
 
-	asid = ASID_MASK(read_c0_entryhi());
+	asid = read_c0_entryhi() & 0xfc0;
 
 	for (i = first; i <= last; i++) {
 		write_c0_index(i<<8);
@@ -36,7 +35,7 @@ static void dump_tlb(int first, int last)
 
 		/* Unused entries have a virtual address of KSEG0.  */
 		if ((entryhi & 0xffffe000) != 0x80000000
-		    && (ASID_MASK(entryhi) == asid)) {
+		    && (entryhi & 0xfc0) == asid) {
 			/*
 			 * Only print entries in use
 			 */
@@ -45,7 +44,7 @@ static void dump_tlb(int first, int last)
 			printk("va=%08lx asid=%08lx"
 			       "  [pa=%06lx n=%d d=%d v=%d g=%d]",
 			       (entryhi & 0xffffe000),
-			       ASID_MASK(entryhi),
+			       entryhi & 0xfc0,
 			       entrylo0 & PAGE_MASK,
 			       (entrylo0 & (1 << 11)) ? 1 : 0,
 			       (entrylo0 & (1 << 10)) ? 1 : 0,

arch/mips/loongson/common/reset.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 
+#include <asm/idle.h>
 #include <asm/reboot.h>
 
 #include <loongson.h>

arch/mips/loongson1/common/reset.c

@@ -9,6 +9,7 @@
 
 #include <linux/io.h>
 #include <linux/pm.h>
+#include <asm/idle.h>
 #include <asm/reboot.h>
 
 #include <loongson1.h>

arch/mips/mm/tlb-r3k.c

@@ -51,7 +51,7 @@ void local_flush_tlb_all(void)
 #endif
 
 	local_irq_save(flags);
-	old_ctx = ASID_MASK(read_c0_entryhi());
+	old_ctx = read_c0_entryhi() & ASID_MASK;
 	write_c0_entrylo0(0);
 	entry = r3k_have_wired_reg ? read_c0_wired() : 8;
 	for (; entry < current_cpu_data.tlbsize; entry++) {
@@ -87,13 +87,13 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 #ifdef DEBUG_TLB
 		printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
-			ASID_MASK(cpu_context(cpu, mm)), start, end);
+			cpu_context(cpu, mm) & ASID_MASK, start, end);
 #endif
 		local_irq_save(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 		if (size <= current_cpu_data.tlbsize) {
-			int oldpid = ASID_MASK(read_c0_entryhi());
-			int newpid = ASID_MASK(cpu_context(cpu, mm));
+			int oldpid = read_c0_entryhi() & ASID_MASK;
+			int newpid = cpu_context(cpu, mm) & ASID_MASK;
 
 			start &= PAGE_MASK;
 			end += PAGE_SIZE - 1;
@@ -166,10 +166,10 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 #ifdef DEBUG_TLB
 		printk("[tlbpage<%lu,0x%08lx>]", cpu_context(cpu, vma->vm_mm), page);
 #endif
-		newpid = ASID_MASK(cpu_context(cpu, vma->vm_mm));
+		newpid = cpu_context(cpu, vma->vm_mm) & ASID_MASK;
 		page &= PAGE_MASK;
 		local_irq_save(flags);
-		oldpid = ASID_MASK(read_c0_entryhi());
+		oldpid = read_c0_entryhi() & ASID_MASK;
 		write_c0_entryhi(page | newpid);
 		BARRIER;
 		tlb_probe();
@@ -197,10 +197,10 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	if (current->active_mm != vma->vm_mm)
 		return;
 
-	pid = ASID_MASK(read_c0_entryhi());
+	pid = read_c0_entryhi() & ASID_MASK;
 
 #ifdef DEBUG_TLB
-	if ((pid != ASID_MASK(cpu_context(cpu, vma->vm_mm))) || (cpu_context(cpu, vma->vm_mm) == 0)) {
+	if ((pid != (cpu_context(cpu, vma->vm_mm) & ASID_MASK)) || (cpu_context(cpu, vma->vm_mm) == 0)) {
 		printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%lu tlbpid=%d\n",
 		       (cpu_context(cpu, vma->vm_mm)), pid);
 	}
@@ -241,7 +241,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 
 		local_irq_save(flags);
 		/* Save old context and create impossible VPN2 value */
-		old_ctx = ASID_MASK(read_c0_entryhi());
+		old_ctx = read_c0_entryhi() & ASID_MASK;
 		old_pagemask = read_c0_pagemask();
 		w = read_c0_wired();
 		write_c0_wired(w + 1);
@@ -264,7 +264,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 #endif
 
 		local_irq_save(flags);
-		old_ctx = ASID_MASK(read_c0_entryhi());
+		old_ctx = read_c0_entryhi() & ASID_MASK;
 		write_c0_entrylo0(entrylo0);
 		write_c0_entryhi(entryhi);
 		write_c0_index(wired);

arch/mips/mm/tlb-r4k.c

@@ -287,7 +287,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 
 	ENTER_CRITICAL(flags);
 
-	pid = ASID_MASK(read_c0_entryhi());
+	pid = read_c0_entryhi() & ASID_MASK;
 	address &= (PAGE_MASK << 1);
 	write_c0_entryhi(address | pid);
 	pgdp = pgd_offset(vma->vm_mm, address);

arch/mips/mm/tlb-r8k.c

@@ -195,7 +195,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	if (current->active_mm != vma->vm_mm)
 		return;
 
-	pid = ASID_MASK(read_c0_entryhi());
+	pid = read_c0_entryhi() & ASID_MASK;
 
 	local_irq_save(flags);
 	address &= PAGE_MASK;

arch/mips/mm/tlbex.c

@@ -29,7 +29,6 @@
 #include <linux/init.h>
 #include <linux/cache.h>
 
-#include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/pgtable.h>
 #include <asm/war.h>
@@ -306,78 +305,6 @@ static struct uasm_reloc relocs[128] __cpuinitdata;
 static int check_for_high_segbits __cpuinitdata;
 #endif
 
-static void __cpuinit insn_fixup(unsigned int **start, unsigned int **stop,
-					unsigned int i_const)
-{
-	unsigned int **p;
-
-	for (p = start; p < stop; p++) {
-#ifndef CONFIG_CPU_MICROMIPS
-		unsigned int *ip;
-
-		ip = *p;
-		*ip = (*ip & 0xffff0000) | i_const;
-#else
-		unsigned short *ip;
-
-		ip = ((unsigned short *)((unsigned int)*p - 1));
-		if ((*ip & 0xf000) == 0x4000) {
-			*ip &= 0xfff1;
-			*ip |= (i_const << 1);
-		} else if ((*ip & 0xf000) == 0x6000) {
-			*ip &= 0xfff1;
-			*ip |= ((i_const >> 2) << 1);
-		} else {
-			ip++;
-			*ip = i_const;
-		}
-#endif
-		local_flush_icache_range((unsigned long)ip,
-					 (unsigned long)ip + sizeof(*ip));
-	}
-}
-
-#define asid_insn_fixup(section, const)					\
-do {									\
-	extern unsigned int *__start_ ## section;			\
-	extern unsigned int *__stop_ ## section;			\
-	insn_fixup(&__start_ ## section, &__stop_ ## section, const);	\
-} while(0)
-
-/*
- * Caller is assumed to flush the caches before the first context switch.
- */
-static void __cpuinit setup_asid(unsigned int inc, unsigned int mask,
-				 unsigned int version_mask,
-				 unsigned int first_version)
-{
-	extern asmlinkage void handle_ri_rdhwr_vivt(void);
-	unsigned long *vivt_exc;
-
-#ifdef CONFIG_CPU_MICROMIPS
-	/*
-	 * Worst case optimised microMIPS addiu instructions support
-	 * only a 3-bit immediate value.
-	 */
-	if(inc > 7)
-		panic("Invalid ASID increment value!");
-#endif
-	asid_insn_fixup(__asid_inc, inc);
-	asid_insn_fixup(__asid_mask, mask);
-	asid_insn_fixup(__asid_version_mask, version_mask);
-	asid_insn_fixup(__asid_first_version, first_version);
-
-	/* Patch up the 'handle_ri_rdhwr_vivt' handler. */
-	vivt_exc = (unsigned long *) &handle_ri_rdhwr_vivt;
-#ifdef CONFIG_CPU_MICROMIPS
-	vivt_exc = (unsigned long *)((unsigned long) vivt_exc - 1);
-#endif
-	vivt_exc++;
-	*vivt_exc = (*vivt_exc & ~mask) | mask;
-
-	current_cpu_data.asid_cache = first_version;
-}
-
 static int check_for_high_segbits __cpuinitdata;
 
 static unsigned int kscratch_used_mask __cpuinitdata;
@@ -2256,7 +2183,6 @@ void __cpuinit build_tlb_refill_handler(void)
 	case CPU_TX3922:
 	case CPU_TX3927:
 #ifndef CONFIG_MIPS_PGD_C0_CONTEXT
-		setup_asid(0x40, 0xfc0, 0xf000, ASID_FIRST_VERSION_R3000);
 		if (cpu_has_local_ebase)
 			build_r3000_tlb_refill_handler();
 		if (!run_once) {
@@ -2282,11 +2208,6 @@ void __cpuinit build_tlb_refill_handler(void)
 		break;
 
 	default:
-#ifndef CONFIG_MIPS_MT_SMTC
-		setup_asid(0x1, 0xff, 0xff00, ASID_FIRST_VERSION_R4000);
-#else
-		setup_asid(0x1, smtc_asid_mask, 0xff00, ASID_FIRST_VERSION_R4000);
-#endif
 		if (!run_once) {
 			scratch_reg = allocate_kscratch();
 #ifdef CONFIG_MIPS_PGD_C0_CONTEXT

arch/mips/netlogic/xlp/setup.c

@@ -37,6 +37,7 @@
 #include <linux/pm.h>
 #include <linux/bootmem.h>
 
+#include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <asm/bootinfo.h>

arch/mips/netlogic/xlr/setup.c

@@ -36,6 +36,7 @@
 #include <linux/serial_8250.h>
 #include <linux/pm.h>
 
+#include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <asm/bootinfo.h>

arch/mips/pmcs-msp71xx/msp_prom.c

@@ -83,7 +83,7 @@ static inline unsigned char str2hexnum(unsigned char c)
 	return 0; /* foo */
 }
 
-static inline int str2eaddr(unsigned char *ea, unsigned char *str)
+int str2eaddr(unsigned char *ea, unsigned char *str)
 {
 	int index = 0;
 	unsigned char num = 0;

arch/mips/pmcs-msp71xx/msp_setup.c

@@ -12,6 +12,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/cacheflush.h>
+#include <asm/idle.h>
 #include <asm/r4kcache.h>
 #include <asm/reboot.h>
 #include <asm/smp-ops.h>

arch/mips/ralink/dts/rt3050.dtsi

@@ -55,4 +55,14 @@
 			reg-shift = <2>;
 		};
 	};
+
+	usb@101c0000 {
+		compatible = "ralink,rt3050-usb", "snps,dwc2";
+		reg = <0x101c0000 40000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		status = "disabled";
+	};
 };

arch/mips/ralink/dts/rt3052_eval.dts

@@ -43,4 +43,8 @@
 			reg = <0x50000 0x7b0000>;
 		};
 	};
+
+	usb@101c0000 {
+		status = "ok";
+	};
 };

arch/mips/txx9/generic/setup.c

@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <asm/bootinfo.h>
+#include <asm/idle.h>
 #include <asm/time.h>
 #include <asm/reboot.h>
 #include <asm/r4kcache.h>

arch/mips/vr41xx/common/pmu.c

@@ -27,6 +27,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/idle.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/reboot.h>

arch/mips/wrppmc/reset.c

@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 
 #include <asm/cacheflush.h>
+#include <asm/idle.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
 

arch/parisc/Kconfig

@@ -245,7 +245,7 @@ config SMP
 
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
-	default n
+	default y
 	help
 	  If you say Y here the kernel will use separate kernel stacks
 	  for handling hard and soft interrupts.  This can help avoid

arch/parisc/Makefile

@@ -23,24 +23,21 @@ NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
 LIBGCC		= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-MACHINE		:= $(shell uname -m)
-NATIVE		:= $(if $(filter parisc%,$(MACHINE)),1,0)
-
 ifdef CONFIG_64BIT
 UTS_MACHINE	:= parisc64
 CHECKFLAGS	+= -D__LP64__=1 -m64
-WIDTH		:= 64
+CC_ARCHES	= hppa64
 else # 32-bit
-WIDTH		:=
+CC_ARCHES	= hppa hppa2.0 hppa1.1
 endif
 
-# attempt to help out folks who are cross-compiling
-ifeq ($(NATIVE),1)
-CROSS_COMPILE	:= hppa$(WIDTH)-linux-
-else
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE	:= hppa$(WIDTH)-linux-gnu-
- endif
+ifneq ($(SUBARCH),$(UTS_MACHINE))
+	ifeq ($(CROSS_COMPILE),)
+		CC_SUFFIXES = linux linux-gnu unknown-linux-gnu
+		CROSS_COMPILE := $(call cc-cross-prefix, \
+			$(foreach a,$(CC_ARCHES), \
+			$(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
+	endif
 endif
 
 OBJCOPY_FLAGS =-O binary -R .note -R .comment -S

arch/parisc/include/asm/hardirq.h

@@ -11,10 +11,18 @@
 #include <linux/threads.h>
 #include <linux/irq.h>
 
+#ifdef CONFIG_IRQSTACKS
+#define __ARCH_HAS_DO_SOFTIRQ
+#endif
+
 typedef struct {
 	unsigned int __softirq_pending;
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	unsigned int kernel_stack_usage;
+#ifdef CONFIG_IRQSTACKS
+	unsigned int irq_stack_usage;
+	unsigned int irq_stack_counter;
+#endif
 #endif
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
@@ -28,6 +36,7 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 #define __ARCH_IRQ_STAT
 #define __IRQ_STAT(cpu, member) (irq_stat[cpu].member)
 #define inc_irq_stat(member)	this_cpu_inc(irq_stat.member)
+#define __inc_irq_stat(member)	__this_cpu_inc(irq_stat.member)
 #define local_softirq_pending()	this_cpu_read(irq_stat.__softirq_pending)
 
 #define __ARCH_SET_SOFTIRQ_PENDING

arch/parisc/include/asm/processor.h

@@ -63,10 +63,13 @@
  */
 #ifdef __KERNEL__
 
+#include <linux/spinlock_types.h>
+
 #define IRQ_STACK_SIZE      (4096 << 2) /* 16k irq stack size */
 
 union irq_stack_union {
 	unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
+	raw_spinlock_t lock;
 };
 
 DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);

arch/parisc/kernel/entry.S

@@ -452,9 +452,41 @@
 	L2_ptep		\pgd,\pte,\index,\va,\fault
 	.endm
 
+	/* Acquire pa_dbit_lock lock. */
+	.macro		dbit_lock	spc,tmp,tmp1
+#ifdef CONFIG_SMP
+	cmpib,COND(=),n	0,\spc,2f
+	load32		PA(pa_dbit_lock),\tmp
+1:	LDCW		0(\tmp),\tmp1
+	cmpib,COND(=)	0,\tmp1,1b
+	nop
+2:
+#endif
+	.endm
+
+	/* Release pa_dbit_lock lock without reloading lock address. */
+	.macro		dbit_unlock0	spc,tmp
+#ifdef CONFIG_SMP
+	or,COND(=)	%r0,\spc,%r0
+	stw             \spc,0(\tmp)
+#endif
+	.endm
+
+	/* Release pa_dbit_lock lock. */
+	.macro		dbit_unlock1	spc,tmp
+#ifdef CONFIG_SMP
+	load32		PA(pa_dbit_lock),\tmp
+	dbit_unlock0	\spc,\tmp
+#endif
+	.endm
+
 	/* Set the _PAGE_ACCESSED bit of the PTE.  Be clever and
 	 * don't needlessly dirty the cache line if it was already set */
-	.macro		update_ptep	ptep,pte,tmp,tmp1
+	.macro		update_ptep	spc,ptep,pte,tmp,tmp1
+#ifdef CONFIG_SMP
+	or,COND(=)	%r0,\spc,%r0
+	LDREG		0(\ptep),\pte
+#endif
 	ldi		_PAGE_ACCESSED,\tmp1
 	or		\tmp1,\pte,\tmp
 	and,COND(<>)	\tmp1,\pte,%r0
@@ -463,7 +495,11 @@
 
 	/* Set the dirty bit (and accessed bit).  No need to be
 	 * clever, this is only used from the dirty fault */
-	.macro		update_dirty	ptep,pte,tmp
+	.macro		update_dirty	spc,ptep,pte,tmp
+#ifdef CONFIG_SMP
+	or,COND(=)	%r0,\spc,%r0
+	LDREG		0(\ptep),\pte
+#endif
 	ldi		_PAGE_ACCESSED|_PAGE_DIRTY,\tmp
 	or		\tmp,\pte,\pte
 	STREG		\pte,0(\ptep)
@@ -1111,11 +1147,13 @@ dtlb_miss_20w:
 
 	L3_ptep		ptp,pte,t0,va,dtlb_check_alias_20w
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 	
 	idtlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1135,11 +1173,13 @@ nadtlb_miss_20w:
 
 	L3_ptep		ptp,pte,t0,va,nadtlb_check_alias_20w
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	idtlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1161,7 +1201,8 @@ dtlb_miss_11:
 
 	L2_ptep		ptp,pte,t0,va,dtlb_check_alias_11
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
@@ -1172,6 +1213,7 @@ dtlb_miss_11:
 	idtlbp		prot,(%sr1,va)
 
 	mtsp		t0, %sr1	/* Restore sr1 */
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1192,7 +1234,8 @@ nadtlb_miss_11:
 
 	L2_ptep		ptp,pte,t0,va,nadtlb_check_alias_11
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
@@ -1204,6 +1247,7 @@ nadtlb_miss_11:
 	idtlbp		prot,(%sr1,va)
 
 	mtsp		t0, %sr1	/* Restore sr1 */
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1224,13 +1268,15 @@ dtlb_miss_20:
 
 	L2_ptep		ptp,pte,t0,va,dtlb_check_alias_20
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	f_extend	pte,t0
 
 	idtlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1250,13 +1296,15 @@ nadtlb_miss_20:
 
 	L2_ptep		ptp,pte,t0,va,nadtlb_check_alias_20
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	f_extend	pte,t0
 	
         idtlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1357,11 +1405,13 @@ itlb_miss_20w:
 
 	L3_ptep		ptp,pte,t0,va,itlb_fault
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 	
 	iitlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1379,11 +1429,13 @@ naitlb_miss_20w:
 
 	L3_ptep		ptp,pte,t0,va,naitlb_check_alias_20w
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	iitlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1405,7 +1457,8 @@ itlb_miss_11:
 
 	L2_ptep		ptp,pte,t0,va,itlb_fault
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
@@ -1416,6 +1469,7 @@ itlb_miss_11:
 	iitlbp		prot,(%sr1,va)
 
 	mtsp		t0, %sr1	/* Restore sr1 */
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1427,7 +1481,8 @@ naitlb_miss_11:
 
 	L2_ptep		ptp,pte,t0,va,naitlb_check_alias_11
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
@@ -1438,6 +1493,7 @@ naitlb_miss_11:
 	iitlbp		prot,(%sr1,va)
 
 	mtsp		t0, %sr1	/* Restore sr1 */
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1459,13 +1515,15 @@ itlb_miss_20:
 
 	L2_ptep		ptp,pte,t0,va,itlb_fault
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	f_extend	pte,t0	
 
 	iitlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1477,13 +1535,15 @@ naitlb_miss_20:
 
 	L2_ptep		ptp,pte,t0,va,naitlb_check_alias_20
 
-	update_ptep	ptp,pte,t0,t1
+	dbit_lock	spc,t0,t1
+	update_ptep	spc,ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	f_extend	pte,t0
 
 	iitlbt          pte,prot
+	dbit_unlock1	spc,t0
 
 	rfir
 	nop
@@ -1507,29 +1567,13 @@ dbit_trap_20w:
 
 	L3_ptep		ptp,pte,t0,va,dbit_fault
 
-#ifdef CONFIG_SMP
-	cmpib,COND(=),n        0,spc,dbit_nolock_20w
-	load32		PA(pa_dbit_lock),t0
-
-dbit_spin_20w:
-	LDCW		0(t0),t1
-	cmpib,COND(=)         0,t1,dbit_spin_20w
-	nop
-
-dbit_nolock_20w:
-#endif
-	update_dirty	ptp,pte,t1
+	dbit_lock	spc,t0,t1
+	update_dirty	spc,ptp,pte,t1
 
 	make_insert_tlb	spc,pte,prot
 		
 	idtlbt          pte,prot
-#ifdef CONFIG_SMP
-	cmpib,COND(=),n        0,spc,dbit_nounlock_20w
-	ldi             1,t1
-	stw             t1,0(t0)
-
-dbit_nounlock_20w:
-#endif
+	dbit_unlock0	spc,t0
 
 	rfir
 	nop
@@ -1543,18 +1587,8 @@ dbit_trap_11:
 
 	L2_ptep		ptp,pte,t0,va,dbit_fault
 
-#ifdef CONFIG_SMP
-	cmpib,COND(=),n        0,spc,dbit_nolock_11
-	load32		PA(pa_dbit_lock),t0
-
-dbit_spin_11:
-	LDCW		0(t0),t1
-	cmpib,=         0,t1,dbit_spin_11
-	nop
-
-dbit_nolock_11:
-#endif
-	update_dirty	ptp,pte,t1
+	dbit_lock	spc,t0,t1
+	update_dirty	spc,ptp,pte,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
@@ -1565,13 +1599,7 @@ dbit_nolock_11:
 	idtlbp		prot,(%sr1,va)
 
 	mtsp            t1, %sr1     /* Restore sr1 */
-#ifdef CONFIG_SMP
-	cmpib,COND(=),n        0,spc,dbit_nounlock_11
-	ldi             1,t1
-	stw             t1,0(t0)
-
-dbit_nounlock_11:
-#endif
+	dbit_unlock0	spc,t0
 
 	rfir
 	nop
@@ -1583,32 +1611,15 @@ dbit_trap_20:
 
 	L2_ptep		ptp,pte,t0,va,dbit_fault
 
-#ifdef CONFIG_SMP
-	cmpib,COND(=),n        0,spc,dbit_nolock_20
-	load32		PA(pa_dbit_lock),t0
-
-dbit_spin_20:
-	LDCW		0(t0),t1
-	cmpib,=         0,t1,dbit_spin_20
-	nop
-
-dbit_nolock_20:
-#endif
-	update_dirty	ptp,pte,t1
+	dbit_lock	spc,t0,t1
+	update_dirty	spc,ptp,pte,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	f_extend	pte,t1
 	
         idtlbt          pte,prot
-
-#ifdef CONFIG_SMP
-	cmpib,COND(=),n        0,spc,dbit_nounlock_20
-	ldi             1,t1
-	stw             t1,0(t0)
-
-dbit_nounlock_20:
-#endif
+	dbit_unlock0	spc,t0
 
 	rfir
 	nop

arch/parisc/kernel/irq.c

@@ -166,22 +166,32 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	seq_printf(p, "%*s: ", prec, "STK");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->kernel_stack_usage);
-	seq_printf(p, "  Kernel stack usage\n");
+	seq_puts(p, "  Kernel stack usage\n");
+# ifdef CONFIG_IRQSTACKS
+	seq_printf(p, "%*s: ", prec, "IST");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage);
+	seq_puts(p, "  Interrupt stack usage\n");
+	seq_printf(p, "%*s: ", prec, "ISC");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter);
+	seq_puts(p, "  Interrupt stack usage counter\n");
+# endif
 #endif
 #ifdef CONFIG_SMP
 	seq_printf(p, "%*s: ", prec, "RES");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count);
-	seq_printf(p, "  Rescheduling interrupts\n");
+	seq_puts(p, "  Rescheduling interrupts\n");
 	seq_printf(p, "%*s: ", prec, "CAL");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
-	seq_printf(p, "  Function call interrupts\n");
+	seq_puts(p, "  Function call interrupts\n");
 #endif
 	seq_printf(p, "%*s: ", prec, "TLB");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count);
-	seq_printf(p, "  TLB shootdowns\n");
+	seq_puts(p, "  TLB shootdowns\n");
 	return 0;
 }
 
@@ -378,6 +388,7 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 	unsigned long sp = regs->gr[30];
 	unsigned long stack_usage;
 	unsigned int *last_usage;
+	int cpu = smp_processor_id();
 
 	/* if sr7 != 0, we interrupted a userspace process which we do not want
 	 * to check for stack overflow. We will only check the kernel stack. */
@@ -386,7 +397,31 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 
 	/* calculate kernel stack usage */
 	stack_usage = sp - stack_start;
-	last_usage = &per_cpu(irq_stat.kernel_stack_usage, smp_processor_id());
+#ifdef CONFIG_IRQSTACKS
+	if (likely(stack_usage <= THREAD_SIZE))
+		goto check_kernel_stack; /* found kernel stack */
+
+	/* check irq stack usage */
+	stack_start = (unsigned long) &per_cpu(irq_stack_union, cpu).stack;
+	stack_usage = sp - stack_start;
+
+	last_usage = &per_cpu(irq_stat.irq_stack_usage, cpu);
+	if (unlikely(stack_usage > *last_usage))
+		*last_usage = stack_usage;
+
+	if (likely(stack_usage < (IRQ_STACK_SIZE - STACK_MARGIN)))
+		return;
+
+	pr_emerg("stackcheck: %s will most likely overflow irq stack "
+		 "(sp:%lx, stk bottom-top:%lx-%lx)\n",
+		current->comm, sp, stack_start, stack_start + IRQ_STACK_SIZE);
+	goto panic_check;
+
+check_kernel_stack:
+#endif
+
+	/* check kernel stack usage */
+	last_usage = &per_cpu(irq_stat.kernel_stack_usage, cpu);
 
 	if (unlikely(stack_usage > *last_usage))
 		*last_usage = stack_usage;
@@ -398,31 +433,69 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 		 "(sp:%lx, stk bottom-top:%lx-%lx)\n",
 		current->comm, sp, stack_start, stack_start + THREAD_SIZE);
 
+#ifdef CONFIG_IRQSTACKS
+panic_check:
+#endif
 	if (sysctl_panic_on_stackoverflow)
 		panic("low stack detected by irq handler - check messages\n");
 #endif
 }
 
 #ifdef CONFIG_IRQSTACKS
-DEFINE_PER_CPU(union irq_stack_union, irq_stack_union);
+DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = {
+		.lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock)
+	};
 
 static void execute_on_irq_stack(void *func, unsigned long param1)
 {
-	unsigned long *irq_stack_start;
+	union irq_stack_union *union_ptr;
 	unsigned long irq_stack;
-	int cpu = smp_processor_id();
+	raw_spinlock_t *irq_stack_in_use;
 
-	irq_stack_start = &per_cpu(irq_stack_union, cpu).stack[0];
-	irq_stack = (unsigned long) irq_stack_start;
-	irq_stack = ALIGN(irq_stack, 16); /* align for stack frame usage */
+	union_ptr = &per_cpu(irq_stack_union, smp_processor_id());
+	irq_stack = (unsigned long) &union_ptr->stack;
+	irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock),
+			 64); /* align for stack frame usage */
 
-	BUG_ON(*irq_stack_start); /* report bug if we were called recursive. */
-	*irq_stack_start = 1;
+	/* We may be called recursive. If we are already using the irq stack,
+	 * just continue to use it. Use spinlocks to serialize
+	 * the irq stack usage.
+	 */
+	irq_stack_in_use = &union_ptr->lock;
+	if (!raw_spin_trylock(irq_stack_in_use)) {
+		void (*direct_call)(unsigned long p1) = func;
+
+		/* We are using the IRQ stack already.
+		 * Do direct call on current stack. */
+		direct_call(param1);
+		return;
+	}
 
 	/* This is where we switch to the IRQ stack. */
 	call_on_stack(param1, func, irq_stack);
 
-	*irq_stack_start = 0;
+	__inc_irq_stat(irq_stack_counter);
+
+	/* free up irq stack usage. */
+	do_raw_spin_unlock(irq_stack_in_use);
+}
+
+asmlinkage void do_softirq(void)
+{
+	__u32 pending;
+	unsigned long flags;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	pending = local_softirq_pending();
+
+	if (pending)
+		execute_on_irq_stack(__do_softirq, 0);
+
+	local_irq_restore(flags);
 }
 #endif /* CONFIG_IRQSTACKS */
 

arch/parisc/mm/init.c

@@ -1069,7 +1069,7 @@ void flush_tlb_all(void)
 {
 	int do_recycle;
 
-	inc_irq_stat(irq_tlb_count);
+	__inc_irq_stat(irq_tlb_count);
 	do_recycle = 0;
 	spin_lock(&sid_lock);
 	if (dirty_space_ids > RECYCLE_THRESHOLD) {
@@ -1090,7 +1090,7 @@ void flush_tlb_all(void)
 #else
 void flush_tlb_all(void)
 {
-	inc_irq_stat(irq_tlb_count);
+	__inc_irq_stat(irq_tlb_count);
 	spin_lock(&sid_lock);
 	flush_tlb_all_local(NULL);
 	recycle_sids();

arch/powerpc/Kconfig.debug

@@ -262,8 +262,31 @@ config PPC_EARLY_DEBUG_OPAL_HVSI
 	  Select this to enable early debugging for the PowerNV platform
 	  using an "hvsi" console
 
+config PPC_EARLY_DEBUG_MEMCONS
+	bool "In memory console"
+	help
+	  Select this to enable early debugging using an in memory console.
+	  This console provides input and output buffers stored within the
+	  kernel BSS and should be safe to select on any system. A debugger
+	  can then be used to read kernel output or send input to the console.
 endchoice
 
+config PPC_MEMCONS_OUTPUT_SIZE
+	int "In memory console output buffer size"
+	depends on PPC_EARLY_DEBUG_MEMCONS
+	default 4096
+	help
+	  Selects the size of the output buffer (in bytes) of the in memory
+	  console.
+
+config PPC_MEMCONS_INPUT_SIZE
+	int "In memory console input buffer size"
+	depends on PPC_EARLY_DEBUG_MEMCONS
+	default 128
+	help
+	  Selects the size of the input buffer (in bytes) of the in memory
+	  console.
+
 config PPC_EARLY_DEBUG_OPAL
 	def_bool y
 	depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI

arch/powerpc/configs/ps3_defconfig

@@ -136,7 +136,6 @@ CONFIG_HID_SMARTJOYPLUS=m
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=m
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=m
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set

arch/powerpc/include/asm/context_tracking.h

@@ -0,0 +1,10 @@
+#ifndef _ASM_POWERPC_CONTEXT_TRACKING_H
+#define _ASM_POWERPC_CONTEXT_TRACKING_H
+
+#ifdef CONFIG_CONTEXT_TRACKING
+#define SCHEDULE_USER bl	.schedule_user
+#else
+#define SCHEDULE_USER bl	.schedule
+#endif
+
+#endif

arch/powerpc/include/asm/firmware.h

@@ -52,6 +52,7 @@
 #define FW_FEATURE_BEST_ENERGY	ASM_CONST(0x0000000080000000)
 #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
 #define FW_FEATURE_PRRN		ASM_CONST(0x0000000200000000)
+#define FW_FEATURE_OPALv3	ASM_CONST(0x0000000400000000)
 
 #ifndef __ASSEMBLY__
 
@@ -69,7 +70,8 @@ enum {
 		FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
 		FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
-	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
+	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2 |
+		FW_FEATURE_OPALv3,
 	FW_FEATURE_POWERNV_ALWAYS = 0,
 	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,

arch/powerpc/include/asm/hw_irq.h

@@ -96,11 +96,12 @@ static inline bool arch_irqs_disabled(void)
 #endif
 
 #define hard_irq_disable()	do {			\
+	u8 _was_enabled = get_paca()->soft_enabled;	\
 	__hard_irq_disable();				\
-	if (local_paca->soft_enabled)			\
-		trace_hardirqs_off();			\
 	get_paca()->soft_enabled = 0;			\
 	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;	\
+	if (_was_enabled)				\
+		trace_hardirqs_off();			\
 } while(0)
 
 static inline bool lazy_irq_pending(void)

arch/powerpc/include/asm/opal.h

@@ -243,7 +243,8 @@ enum OpalMCE_TlbErrorType {
 
 enum OpalThreadStatus {
 	OPAL_THREAD_INACTIVE = 0x0,
-	OPAL_THREAD_STARTED = 0x1
+	OPAL_THREAD_STARTED = 0x1,
+	OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */
 };
 
 enum OpalPciBusCompare {
@@ -563,6 +564,8 @@ extern void opal_nvram_init(void);
 
 extern int opal_machine_check(struct pt_regs *regs);
 
+extern void opal_shutdown(void);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_H */

arch/powerpc/include/asm/pci-bridge.h

@@ -174,6 +174,8 @@ struct pci_dn {
 /* Get the pointer to a device_node's pci_dn */
 #define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
 
+extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev);
+
 extern void * update_dn_pci_info(struct device_node *dn, void *data);
 
 static inline int pci_device_from_OF_node(struct device_node *np,