Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

drivers/net/wireless/ath/ar9170/usb.c

@@ -739,17 +739,27 @@ err_out:
 static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
 {
 	struct device *parent = aru->udev->dev.parent;
+	struct usb_device *udev;
+
+	/*
+	 * Store a copy of the usb_device pointer locally.
+	 * This is because device_release_driver initiates
+	 * ar9170_usb_disconnect, which in turn frees our
+	 * driver context (aru).
+	 */
+	udev = aru->udev;
 
 	complete(&aru->firmware_loading_complete);
 
 	/* unbind anything failed */
 	if (parent)
 		device_lock(parent);
-	device_release_driver(&aru->udev->dev);
+
+	device_release_driver(&udev->dev);
 	if (parent)
 		device_unlock(parent);
 
-	usb_put_dev(aru->udev);
+	usb_put_dev(udev);
 }
 
 static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context)

drivers/net/wireless/ath/ath9k/xmit.c

@@ -1198,7 +1198,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 		int r;
 
 		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to stop TxDMA. Reset HAL!\n");
+			  "Failed to stop TX DMA. Resetting hardware!\n");
 
 		spin_lock_bh(&sc->sc_resetlock);
 		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
@@ -1728,6 +1728,8 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 	} else
 		bf->bf_isnullfunc = false;
 
+	bf->bf_tx_aborted = false;
+
 	return 0;
 }
 
@@ -1989,7 +1991,7 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf,
 	int nbad = 0;
 	int isaggr = 0;
 
-	if (bf->bf_tx_aborted)
+	if (bf->bf_lastbf->bf_tx_aborted)
 		return 0;
 
 	isaggr = bf_isaggr(bf);

drivers/net/wireless/libertas/rx.c

@@ -329,9 +329,8 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 	/* create the exported radio header */
 
 	/* radiotap header */
-	radiotap_hdr.hdr.it_version = 0;
-	/* XXX must check this value for pad */
-	radiotap_hdr.hdr.it_pad = 0;
+	memset(&radiotap_hdr, 0, sizeof(radiotap_hdr));
+	/* XXX must check radiotap_hdr.hdr.it_pad for pad */
 	radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
 	radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
 	radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -413,7 +413,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	 */
 	rt2x00_desc_read(txi, 0, &word);
 	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
-			   skb->len - TXINFO_DESC_SIZE);
+			   skb->len + TXWI_DESC_SIZE);
 	rt2x00_set_field32(&word, TXINFO_W0_WIV,
 			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 	rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);

drivers/ssb/pci.c

@@ -625,9 +625,12 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
 		return -ENODEV;
 	}
-
-	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
-		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
+	if (bus->chipco.dev) {	/* can be unavailible! */
+		bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
+			SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
+	} else {
+		bus->sprom_offset = SSB_SPROM_BASE1;
+	}
 
 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
 	if (!buf)

drivers/ssb/sprom.c

@@ -185,6 +185,7 @@ bool ssb_is_sprom_available(struct ssb_bus *bus)
 	/* this routine differs from specs as we do not access SPROM directly
 	   on PCMCIA */
 	if (bus->bustype == SSB_BUSTYPE_PCI &&
+	    bus->chipco.dev &&	/* can be unavailible! */
 	    bus->chipco.dev->id.revision >= 31)
 		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
 

net/mac80211/chan.c

@@ -5,7 +5,7 @@
 #include <linux/nl80211.h>
 #include "ieee80211_i.h"
 
-enum ieee80211_chan_mode
+static enum ieee80211_chan_mode
 __ieee80211_get_channel_mode(struct ieee80211_local *local,
 			     struct ieee80211_sub_if_data *ignore)
 {