ASoC: wm8991: Move basic initialisation to I2C level probe

This is better practice, though some of this stuff ought not to be here at
all.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
This commit is contained in:
Mark Brown 2013-11-22 13:32:36 +00:00
parent a86652e51a
commit e4634804ca

View File

@ -111,8 +111,6 @@ static bool wm8991_volatile(struct device *dev, unsigned int reg)
}
}
#define wm8991_reset(c) snd_soc_write(c, WM8991_RESET, 0)
static const unsigned int rec_mix_tlv[] = {
TLV_DB_RANGE_HEAD(1),
0, 7, TLV_DB_LINEAR_ITEM(-1500, 600),
@ -1264,31 +1262,8 @@ static int wm8991_probe(struct snd_soc_codec *codec)
return ret;
}
ret = wm8991_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
return ret;
}
wm8991_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
snd_soc_update_bits(codec, WM8991_AUDIO_INTERFACE_4,
WM8991_ALRCGPIO1, WM8991_ALRCGPIO1);
snd_soc_update_bits(codec, WM8991_GPIO1_GPIO2,
WM8991_GPIO1_SEL_MASK, 1);
snd_soc_update_bits(codec, WM8991_POWER_MANAGEMENT_1,
WM8991_VREF_ENA | WM8991_VMID_MODE_MASK,
WM8991_VREF_ENA | WM8991_VMID_MODE_MASK);
snd_soc_update_bits(codec, WM8991_POWER_MANAGEMENT_2,
WM8991_OPCLK_ENA, WM8991_OPCLK_ENA);
snd_soc_write(codec, WM8991_DAC_CTRL, 0);
snd_soc_write(codec, WM8991_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
snd_soc_write(codec, WM8991_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8));
return 0;
}
@ -1372,6 +1347,31 @@ static int wm8991_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8991);
ret = regmap_write(wm8991->regmap, WM8991_RESET, 0);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret);
return ret;
}
regmap_update_bits(wm8991->regmap, WM8991_AUDIO_INTERFACE_4,
WM8991_ALRCGPIO1, WM8991_ALRCGPIO1);
regmap_update_bits(wm8991->regmap, WM8991_GPIO1_GPIO2,
WM8991_GPIO1_SEL_MASK, 1);
regmap_update_bits(wm8991->regmap, WM8991_POWER_MANAGEMENT_1,
WM8991_VREF_ENA | WM8991_VMID_MODE_MASK,
WM8991_VREF_ENA | WM8991_VMID_MODE_MASK);
regmap_update_bits(wm8991->regmap, WM8991_POWER_MANAGEMENT_2,
WM8991_OPCLK_ENA, WM8991_OPCLK_ENA);
regmap_write(wm8991->regmap, WM8991_DAC_CTRL, 0);
regmap_write(wm8991->regmap, WM8991_LEFT_OUTPUT_VOLUME,
0x50 | (1<<8));
regmap_write(wm8991->regmap, WM8991_RIGHT_OUTPUT_VOLUME,
0x50 | (1<<8));
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8991, &wm8991_dai, 1);