treewide: Fix typos in printk

This patch fix multiple spelling typos found in
various part of kernel.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Masanari Iida 2015-10-16 21:14:29 +09:00 committed by Jiri Kosina
parent 20d5a865e1
commit e3d132d123
11 changed files with 13 additions and 13 deletions

View File

@ -253,7 +253,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
sys_table->boottime->free_pool(memory_map);
new_fdt_size += EFI_PAGE_SIZE;
} else {
pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
pr_efi_err(sys_table, "Unable to construct new device tree.\n");
goto fail_free_mmap;
}
}

View File

@ -449,7 +449,7 @@ static void act_open_req_arp_failure(void *handle, struct sk_buff *skb)
{
struct c4iw_ep *ep = handle;
printk(KERN_ERR MOD "ARP failure duing connect\n");
printk(KERN_ERR MOD "ARP failure during connect\n");
kfree_skb(skb);
connect_reply_upcall(ep, -EHOSTUNREACH);
state_set(&ep->com, DEAD);

View File

@ -549,13 +549,13 @@ static void *raid0_takeover_raid10(struct mddev *mddev)
* - all mirrors must be already degraded
*/
if (mddev->layout != ((1 << 8) + 2)) {
printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takover layout: 0x%x\n",
printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
mdname(mddev),
mddev->layout);
return ERR_PTR(-EINVAL);
}
if (mddev->raid_disks & 1) {
printk(KERN_ERR "md/raid0:%s: Raid0 cannot takover Raid10 with odd disk number.\n",
printk(KERN_ERR "md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
mdname(mddev));
return ERR_PTR(-EINVAL);
}

View File

@ -502,7 +502,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuf
/* check if overlay is running */
if (IS_OVERLAY_ACTIVE(fh) != 0) {
if (vv->video_fh != fh) {
DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
return -EBUSY;
}
}

View File

@ -685,7 +685,7 @@ static int m88ds3103_init(struct dvb_frontend *fe)
/* request the firmware, this will block and timeout */
ret = request_firmware(&fw, fw_file, &client->dev);
if (ret) {
dev_err(&client->dev, "firmare file '%s' not found\n", fw_file);
dev_err(&client->dev, "firmware file '%s' not found\n", fw_file);
goto err;
}

View File

@ -511,7 +511,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
&offset, block_count);
if (ret < 0) {
dev_err(&state->i2c->dev,
"%s: firmare could not be uploaded\n",
"%s: firmware could not be uploaded\n",
KBUILD_MODNAME);
goto error;
}
@ -535,7 +535,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
if (len != offset) {
dev_err(&state->i2c->dev,
"%s: firmare len mismatch %04x != %04x\n",
"%s: firmware len mismatch %04x != %04x\n",
KBUILD_MODNAME, len, offset);
ret = -EINVAL;
goto error;

View File

@ -388,7 +388,7 @@ static int netup_unidvb_dvb_init(struct netup_unidvb_dev *ndev,
vb2_dvb_alloc_frontend(
&ndev->frontends[num], 3) == NULL) {
dev_dbg(&ndev->pci_dev->dev,
"%s(): unable to to alllocate vb2_dvb_frontend\n",
"%s(): unable to allocate vb2_dvb_frontend\n",
__func__);
return -ENOMEM;
}

View File

@ -1229,7 +1229,7 @@ static void i40evf_configure_rss_aq(struct i40e_vsi *vsi, const u8 *seed)
if (adapter->current_op != I40E_VIRTCHNL_OP_UNKNOWN) {
/* bail because we already have a command pending */
dev_err(&adapter->pdev->dev, "Cannot confiure RSS, command %d pending\n",
dev_err(&adapter->pdev->dev, "Cannot configure RSS, command %d pending\n",
adapter->current_op);
return;
}

View File

@ -389,7 +389,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name,
*dma_instance = dma_node->name;
index = of_property_match_string(np, "ti,navigator-dma-names", name);
if (index < 0) {
dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n");
dev_err(kdev->dev, "No 'ti,navigator-dma-names' property\n");
return -ENODEV;
}

View File

@ -47,7 +47,7 @@ void snd_pcm_indirect2_stat(struct snd_pcm_substream *substream,
int seconds = (rec->lastbytetime - rec->firstbytetime) / HZ;
snd_printk(KERN_DEBUG "STAT: mul_elapsed: %u, mul_elapsed_real: %d, "
"irq_occured: %d\n",
"irq_occurred: %d\n",
rec->mul_elapsed, rec->mul_elapsed_real, rec->irq_occured);
snd_printk(KERN_DEBUG "STAT: min_multiple: %d (irqs/period)\n",
rec->min_multiple);

View File

@ -350,7 +350,7 @@ static int usb6fire_fw_check(struct usb_interface *intf, const u8 *version)
if (!memcmp(version, known_fw_versions + i, 2))
return 0;
dev_err(&intf->dev, "invalid fimware version in device: %4ph. "
dev_err(&intf->dev, "invalid firmware version in device: %4ph. "
"please reconnect to power. if this failure "
"still happens, check your firmware installation.",
version);