platform-drivers-x86 for 4.10-1

Introduce one new driver for Mellanox platforms. Add support for various new
 models to existing drivers via quirks, hotkeys, etc. Significant updates to
 intel_pmc_core in support of Kabylake and Sunrise Point PCH power management
 debug. Some cleanup and refactoring across various drivers.
 
 dell-laptop:
  - Use brightness_set_blocking for kbd_led_level_set
 
 thinkpad_acpi:
  - Initialize local in_tablet_mode and type
  - Fix old style declaration GCC warning
  - Adding new hotkey ID for Lenovo thinkpad
  - Add support for X1 Yoga (2016) Tablet Mode
  - Move tablet detection into separate function
 
 asus-nb-wmi:
  - Add X45U quirk
  - Make use of dmi->ident
 
 asus-wmi:
  - Set specified XUSB2PR value for X550LB
 
 intel_mid_thermal:
  - Fix suspend handlers unused warning
 
 intel-vbtn:
  - Switch to use devm_input_allocate_device
 
 dell-wmi:
  - Add events created by Dell Rugged 2-in-1s
  - Adjust wifi catcher to emit KEY_WLAN
 
 intel_pmc_core:
  - Add KBL CPUID support
  - Add LTR IGNORE debug feature
  - Add MPHY PLL clock gating status
  - ModPhy core lanes pg status
  - Add PCH IP Power Gating Status
  - Fix PWRMBASE mask and mmio reg len
 
 acer-wmi:
  - Only supports AMW0_GUID1 on acer family
 
 mlx-platform:
  - Introduce support for Mellanox hotplug driver
 
 platform/x86:
  - Use ACPI_FAILURE at appropriate places
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYUwFxAAoJEKbMaAwKp3645GkH/RjsE8jubyerhlKqgG4UZaRA
 2a2NnCOI1fuDqSV0bgIo4rzMHeHHjR8Hosz6HXkb3cC67QNfae3Xasr2+vqzqqKd
 hJFUL/y6JmAhLUcPVp49HWOLrYLKM12iLyEidPOor4r/qWrarLtVEyvX5O8VEy01
 +cM29+KcZnHjtQQoDaVwWZ1bEbLVNRlSrQ/YZivGBPXJBsvnz1Wq5xPuGHDm660X
 rVw8h1GojPwctiNWTpw2VlMUz8Ho0yXMBAPTpEJOzlFR8FTaSD6XQqm/uZ5w8ToJ
 Sn12XavaKeQSki7VVTmouL+L4Ams0Ygz8pgDd3ynhN6U/hFfTWbGhdRCILxmSRk=
 =iHwp
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darrent Hart:
 "Introduce one new driver for Mellanox platforms. Add support for
  various new models to existing drivers via quirks, hotkeys, etc.
  Significant updates to intel_pmc_core in support of Kabylake and
  Sunrise Point PCH power management debug. Some cleanup and refactoring
  across various drivers.

  Detailed summary:

  dell-laptop:
   - Use brightness_set_blocking for kbd_led_level_set

  thinkpad_acpi:
   - Initialize local in_tablet_mode and type
   - Fix old style declaration GCC warning
   - Adding new hotkey ID for Lenovo thinkpad
   - Add support for X1 Yoga (2016) Tablet Mode
   - Move tablet detection into separate function

  asus-nb-wmi:
   - Add X45U quirk
   - Make use of dmi->ident

  asus-wmi:
   - Set specified XUSB2PR value for X550LB

  intel_mid_thermal:
   - Fix suspend handlers unused warning

  intel-vbtn:
   - Switch to use devm_input_allocate_device

  dell-wmi:
   - Add events created by Dell Rugged 2-in-1s
   - Adjust wifi catcher to emit KEY_WLAN

  intel_pmc_core:
   - Add KBL CPUID support
   - Add LTR IGNORE debug feature
   - Add MPHY PLL clock gating status
   - ModPhy core lanes pg status
   - Add PCH IP Power Gating Status
   - Fix PWRMBASE mask and mmio reg len

  acer-wmi:
   - Only supports AMW0_GUID1 on acer family

  mlx-platform:
   - Introduce support for Mellanox hotplug driver

  platform/x86:
   - Use ACPI_FAILURE at appropriate places"

* tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (22 commits)
  platform/x86: thinkpad_acpi: Initialize local in_tablet_mode and type
  platform/x86: dell-laptop: Use brightness_set_blocking for kbd_led_level_set
  platform/x86: thinkpad_acpi: Fix old style declaration GCC warning
  platform/x86: thinkpad_acpi: Adding new hotkey ID for Lenovo thinkpad
  platform/x86: thinkpad_acpi: Add support for X1 Yoga (2016) Tablet Mode
  platform/x86: thinkpad_acpi: Move tablet detection into separate function
  platform/x86: asus-nb-wmi.c: Add X45U quirk
  platform/x86: asus-nb-wmi: Make use of dmi->ident
  platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB
  platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
  platform/x86: intel-vbtn: Switch to use devm_input_allocate_device
  platform/x86: Use ACPI_FAILURE at appropriate places
  platform/x86: dell-wmi: Add events created by Dell Rugged 2-in-1s
  platform/x86: dell-wmi: Adjust wifi catcher to emit KEY_WLAN
  platform/x86: intel_pmc_core: Add KBL CPUID support
  platform/x86: intel_pmc_core: Add LTR IGNORE debug feature
  platform/x86: intel_pmc_core: Add MPHY PLL clock gating status
  platform/x86: intel_pmc_core: ModPhy core lanes pg status
  platform/x86: intel_pmc_core: Add PCH IP Power Gating Status
  platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg len
  ...
This commit is contained in:
Linus Torvalds 2016-12-15 13:31:25 -08:00
commit e18bf801f1
20 changed files with 1346 additions and 73 deletions

View File

@ -540,6 +540,7 @@ Events that are propagated by the driver to userspace:
0x6022 ALARM: a sensor is extremely hot
0x6030 System thermal table changed
0x6040 Nvidia Optimus/AC adapter related (TO BE VERIFIED)
0x60C0 X1 Yoga 2016, Tablet mode status changed
Battery nearly empty alarms are a last resort attempt to get the
operating system to hibernate or shutdown cleanly (0x2313), or shutdown

View File

@ -8045,6 +8045,13 @@ L: platform-driver-x86@vger.kernel.org
S: Supported
F: arch/x86/platform/mellanox/mlx-platform.c
MELLANOX MLX CPLD HOTPLUG DRIVER
M: Vadim Pasternak <vadimp@mellanox.com>
L: platform-driver-x86@vger.kernel.org
S: Supported
F: drivers/platform/x86/mlxcpld-hotplug.c
F: include/linux/platform_data/mlxcpld-hotplug.h
SOFT-ROCE DRIVER (rxe)
M: Moni Shoua <monis@mellanox.com>
L: linux-rdma@vger.kernel.org

View File

@ -1027,4 +1027,15 @@ config INTEL_TELEMETRY
used to get various SoC events and parameters
directly via debugfs files. Various tools may use
this interface for SoC state monitoring.
config MLX_CPLD_PLATFORM
tristate "Mellanox platform hotplug driver support"
default n
depends on MLX_PLATFORM
select HWMON
select I2C
---help---
This driver handles hot-plug events for the power suppliers, power
cables and fans on the wide range Mellanox IB and Ethernet systems.
endif # X86_PLATFORM_DEVICES

View File

@ -71,3 +71,4 @@ obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
intel_telemetry_pltdrv.o \
intel_telemetry_debugfs.o
obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o
obj-$(CONFIG_MLX_CPLD_PLATFORM) += mlxcpld-hotplug.o

View File

@ -355,6 +355,32 @@ static const struct dmi_system_id acer_blacklist[] __initconst = {
{}
};
static const struct dmi_system_id amw0_whitelist[] __initconst = {
{
.ident = "Acer",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
},
},
{
.ident = "Gateway",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
},
},
{
.ident = "Packard Bell",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Packard Bell"),
},
},
{}
};
/*
* This quirk table is only for Acer/Gateway/Packard Bell family
* that those machines are supported by acer-wmi driver.
*/
static const struct dmi_system_id acer_quirks[] __initconst = {
{
.callback = dmi_matched,
@ -464,6 +490,17 @@ static const struct dmi_system_id acer_quirks[] __initconst = {
},
.driver_data = &quirk_acer_travelmate_2490,
},
{}
};
/*
* This quirk list is for those non-acer machines that have AMW0_GUID1
* but supported by acer-wmi in past days. Keeping this quirk list here
* is only for backward compatible. Please do not add new machine to
* here anymore. Those non-acer machines should be supported by
* appropriate wmi drivers.
*/
static const struct dmi_system_id non_acer_quirks[] __initconst = {
{
.callback = dmi_matched,
.ident = "Fujitsu Siemens Amilo Li 1718",
@ -598,6 +635,7 @@ static void __init find_quirks(void)
{
if (!force_series) {
dmi_check_system(acer_quirks);
dmi_check_system(non_acer_quirks);
} else if (force_series == 2490) {
quirks = &quirk_acer_travelmate_2490;
}
@ -2107,6 +2145,24 @@ static int __init acer_wmi_init(void)
find_quirks();
/*
* The AMW0_GUID1 wmi is not only found on Acer family but also other
* machines like Lenovo, Fujitsu and Medion. In the past days,
* acer-wmi driver handled those non-Acer machines by quirks list.
* But actually acer-wmi driver was loaded on any machines that have
* AMW0_GUID1. This behavior is strange because those machines should
* be supported by appropriate wmi drivers. e.g. fujitsu-laptop,
* ideapad-laptop. So, here checks the machine that has AMW0_GUID1
* should be in Acer/Gateway/Packard Bell white list, or it's already
* in the past quirk list.
*/
if (wmi_has_guid(AMW0_GUID1) &&
!dmi_check_system(amw0_whitelist) &&
quirks == &quirk_unknown) {
pr_err("Unsupported machine has AMW0_GUID1, unable to load\n");
return -ENODEV;
}
/*
* Detect which ACPI-WMI interface we're using.
*/

View File

@ -116,8 +116,13 @@ static struct quirk_entry quirk_asus_ux303ub = {
.wmi_backlight_native = true,
};
static struct quirk_entry quirk_asus_x550lb = {
.xusb2pr = 0x01D9,
};
static int dmi_matched(const struct dmi_system_id *dmi)
{
pr_info("Identified laptop model '%s'\n", dmi->ident);
quirks = dmi->driver_data;
return 1;
}
@ -173,6 +178,15 @@ static const struct dmi_system_id asus_quirks[] = {
},
.driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X45U",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X45U"),
},
.driver_data = &quirk_asus_wapf4,
},
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X456UA",
@ -398,6 +412,15 @@ static const struct dmi_system_id asus_quirks[] = {
},
.driver_data = &quirk_asus_ux303ub,
},
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X550LB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X550LB"),
},
.driver_data = &quirk_asus_x550lb,
},
{},
};

View File

@ -156,6 +156,9 @@ MODULE_LICENSE("GPL");
#define ASUS_FAN_CTRL_MANUAL 1
#define ASUS_FAN_CTRL_AUTO 2
#define USB_INTEL_XUSB2PR 0xD0
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
struct bios_args {
u32 arg0;
u32 arg1;
@ -1080,6 +1083,29 @@ exit:
return result;
}
static void asus_wmi_set_xusb2pr(struct asus_wmi *asus)
{
struct pci_dev *xhci_pdev;
u32 orig_ports_available;
u32 ports_available = asus->driver->quirks->xusb2pr;
xhci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI,
NULL);
if (!xhci_pdev)
return;
pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
&orig_ports_available);
pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
cpu_to_le32(ports_available));
pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n",
orig_ports_available, ports_available);
}
/*
* Hwmon device
*/
@ -2087,6 +2113,9 @@ static int asus_wmi_add(struct platform_device *pdev)
if (asus->driver->quirks->wmi_backlight_native)
acpi_video_set_dmi_backlight_type(acpi_backlight_native);
if (asus->driver->quirks->xusb2pr)
asus_wmi_set_xusb2pr(asus);
if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
err = asus_wmi_backlight_init(asus);
if (err && err != -ENODEV)

View File

@ -53,6 +53,7 @@ struct quirk_entry {
* and let the ACPI interrupt to send out the key event.
*/
int no_display_toggle;
u32 xusb2pr;
bool (*i8042_filter)(unsigned char data, unsigned char str,
struct serio *serio);

View File

@ -1904,38 +1904,40 @@ static enum led_brightness kbd_led_level_get(struct led_classdev *led_cdev)
return 0;
}
static void kbd_led_level_set(struct led_classdev *led_cdev,
enum led_brightness value)
static int kbd_led_level_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct kbd_state state;
struct kbd_state new_state;
u16 num;
int ret;
if (kbd_get_max_level()) {
if (kbd_get_state(&state))
return;
ret = kbd_get_state(&state);
if (ret)
return ret;
new_state = state;
if (kbd_set_level(&new_state, value))
return;
kbd_set_state_safe(&new_state, &state);
return;
ret = kbd_set_level(&new_state, value);
if (ret)
return ret;
return kbd_set_state_safe(&new_state, &state);
}
if (kbd_get_valid_token_counts()) {
for (num = kbd_token_bits; num != 0 && value > 0; --value)
num &= num - 1; /* clear the first bit set */
if (num == 0)
return;
kbd_set_token_bit(ffs(num) - 1);
return;
return 0;
return kbd_set_token_bit(ffs(num) - 1);
}
pr_warn("Keyboard brightness level control not supported\n");
return -ENXIO;
}
static struct led_classdev kbd_led = {
.name = "dell::kbd_backlight",
.brightness_set = kbd_led_level_set,
.brightness_set_blocking = kbd_led_level_set,
.brightness_get = kbd_led_level_get,
.groups = kbd_led_groups,
};

View File

@ -114,7 +114,7 @@ static const struct key_entry dell_wmi_keymap_type_0000[] __initconst = {
{ KE_IGNORE, 0xe00e, { KEY_RESERVED } },
/* Wifi Catcher */
{ KE_KEY, 0xe011, { KEY_PROG2 } },
{ KE_KEY, 0xe011, { KEY_WLAN } },
/* Ambient light sensor toggle */
{ KE_IGNORE, 0xe013, { KEY_RESERVED } },
@ -274,6 +274,16 @@ static const struct key_entry dell_wmi_keymap_type_0010[] __initconst = {
/* Stealth mode toggle */
{ KE_IGNORE, 0x155, { KEY_RESERVED } },
/* Rugged magnetic dock attach/detach events */
{ KE_IGNORE, 0x156, { KEY_RESERVED } },
{ KE_IGNORE, 0x157, { KEY_RESERVED } },
/* Rugged programmable (P1/P2/P3 keys) */
{ KE_KEY, 0x850, { KEY_PROG1 } },
{ KE_KEY, 0x851, { KEY_PROG2 } },
{ KE_KEY, 0x852, { KEY_PROG3 } },
};
/*

View File

@ -69,7 +69,7 @@ static int intel_hid_set_enable(struct device *device, int enable)
arg0.integer.value = enable;
status = acpi_evaluate_object(ACPI_HANDLE(device), "HDSM", &args, NULL);
if (!ACPI_SUCCESS(status)) {
if (ACPI_FAILURE(status)) {
dev_warn(device, "failed to %sable hotkeys\n",
enable ? "en" : "dis");
return -EIO;
@ -148,7 +148,7 @@ static void notify_handler(acpi_handle handle, u32 event, void *context)
}
status = acpi_evaluate_integer(handle, "HDEM", NULL, &ev_index);
if (!ACPI_SUCCESS(status)) {
if (ACPI_FAILURE(status)) {
dev_warn(&device->dev, "failed to get event index\n");
return;
}
@ -167,7 +167,7 @@ static int intel_hid_probe(struct platform_device *device)
int err;
status = acpi_evaluate_integer(handle, "HDMM", NULL, &mode);
if (!ACPI_SUCCESS(status)) {
if (ACPI_FAILURE(status)) {
dev_warn(&device->dev, "failed to read mode\n");
return -ENODEV;
}

View File

@ -29,7 +29,7 @@ static int smartconnect_acpi_init(struct acpi_device *acpi)
acpi_status status;
status = acpi_evaluate_integer(acpi->handle, "GAOS", NULL, &value);
if (!ACPI_SUCCESS(status))
if (ACPI_FAILURE(status))
return -EINVAL;
if (value & 0x1) {

View File

@ -49,34 +49,19 @@ static int intel_vbtn_input_setup(struct platform_device *device)
struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
int ret;
priv->input_dev = input_allocate_device();
priv->input_dev = devm_input_allocate_device(&device->dev);
if (!priv->input_dev)
return -ENOMEM;
ret = sparse_keymap_setup(priv->input_dev, intel_vbtn_keymap, NULL);
if (ret)
goto err_free_device;
return ret;
priv->input_dev->dev.parent = &device->dev;
priv->input_dev->name = "Intel Virtual Button driver";
priv->input_dev->id.bustype = BUS_HOST;
ret = input_register_device(priv->input_dev);
if (ret)
goto err_free_device;
return 0;
err_free_device:
input_free_device(priv->input_dev);
return ret;
}
static void intel_vbtn_input_destroy(struct platform_device *device)
{
struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
input_unregister_device(priv->input_dev);
return input_register_device(priv->input_dev);
}
static void notify_handler(acpi_handle handle, u32 event, void *context)
@ -97,7 +82,7 @@ static int intel_vbtn_probe(struct platform_device *device)
int err;
status = acpi_evaluate_object(handle, "VBDL", NULL, NULL);
if (!ACPI_SUCCESS(status)) {
if (ACPI_FAILURE(status)) {
dev_warn(&device->dev, "failed to read Intel Virtual Button driver\n");
return -ENODEV;
}
@ -117,24 +102,16 @@ static int intel_vbtn_probe(struct platform_device *device)
ACPI_DEVICE_NOTIFY,
notify_handler,
device);
if (ACPI_FAILURE(status)) {
err = -EBUSY;
goto err_remove_input;
}
if (ACPI_FAILURE(status))
return -EBUSY;
return 0;
err_remove_input:
intel_vbtn_input_destroy(device);
return err;
}
static int intel_vbtn_remove(struct platform_device *device)
{
acpi_handle handle = ACPI_HANDLE(&device->dev);
intel_vbtn_input_destroy(device);
acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler);
/*

View File

@ -415,6 +415,7 @@ static struct thermal_device_info *initialize_sensor(int index)
return td_info;
}
#ifdef CONFIG_PM_SLEEP
/**
* mid_thermal_resume - resume routine
* @dev: device structure
@ -442,6 +443,7 @@ static int mid_thermal_suspend(struct device *dev)
*/
return configure_adc(0);
}
#endif
static SIMPLE_DEV_PM_OPS(mid_thermal_pm,
mid_thermal_suspend, mid_thermal_resume);

View File

@ -19,10 +19,12 @@
*/
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/pci.h>
#include <linux/uaccess.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
@ -32,16 +34,106 @@
static struct pmc_dev pmc;
static const struct pmc_bit_map spt_pll_map[] = {
{"MIPI PLL", SPT_PMC_BIT_MPHY_CMN_LANE0},
{"GEN2 USB2PCIE2 PLL", SPT_PMC_BIT_MPHY_CMN_LANE1},
{"DMIPCIE3 PLL", SPT_PMC_BIT_MPHY_CMN_LANE2},
{"SATA PLL", SPT_PMC_BIT_MPHY_CMN_LANE3},
{},
};
static const struct pmc_bit_map spt_mphy_map[] = {
{"MPHY CORE LANE 0", SPT_PMC_BIT_MPHY_LANE0},
{"MPHY CORE LANE 1", SPT_PMC_BIT_MPHY_LANE1},
{"MPHY CORE LANE 2", SPT_PMC_BIT_MPHY_LANE2},
{"MPHY CORE LANE 3", SPT_PMC_BIT_MPHY_LANE3},
{"MPHY CORE LANE 4", SPT_PMC_BIT_MPHY_LANE4},
{"MPHY CORE LANE 5", SPT_PMC_BIT_MPHY_LANE5},
{"MPHY CORE LANE 6", SPT_PMC_BIT_MPHY_LANE6},
{"MPHY CORE LANE 7", SPT_PMC_BIT_MPHY_LANE7},
{"MPHY CORE LANE 8", SPT_PMC_BIT_MPHY_LANE8},
{"MPHY CORE LANE 9", SPT_PMC_BIT_MPHY_LANE9},
{"MPHY CORE LANE 10", SPT_PMC_BIT_MPHY_LANE10},
{"MPHY CORE LANE 11", SPT_PMC_BIT_MPHY_LANE11},
{"MPHY CORE LANE 12", SPT_PMC_BIT_MPHY_LANE12},
{"MPHY CORE LANE 13", SPT_PMC_BIT_MPHY_LANE13},
{"MPHY CORE LANE 14", SPT_PMC_BIT_MPHY_LANE14},
{"MPHY CORE LANE 15", SPT_PMC_BIT_MPHY_LANE15},
{},
};
static const struct pmc_bit_map spt_pfear_map[] = {
{"PMC", SPT_PMC_BIT_PMC},
{"OPI-DMI", SPT_PMC_BIT_OPI},
{"SPI / eSPI", SPT_PMC_BIT_SPI},
{"XHCI", SPT_PMC_BIT_XHCI},
{"SPA", SPT_PMC_BIT_SPA},
{"SPB", SPT_PMC_BIT_SPB},
{"SPC", SPT_PMC_BIT_SPC},
{"GBE", SPT_PMC_BIT_GBE},
{"SATA", SPT_PMC_BIT_SATA},
{"HDA-PGD0", SPT_PMC_BIT_HDA_PGD0},
{"HDA-PGD1", SPT_PMC_BIT_HDA_PGD1},
{"HDA-PGD2", SPT_PMC_BIT_HDA_PGD2},
{"HDA-PGD3", SPT_PMC_BIT_HDA_PGD3},
{"RSVD", SPT_PMC_BIT_RSVD_0B},
{"LPSS", SPT_PMC_BIT_LPSS},
{"LPC", SPT_PMC_BIT_LPC},
{"SMB", SPT_PMC_BIT_SMB},
{"ISH", SPT_PMC_BIT_ISH},
{"P2SB", SPT_PMC_BIT_P2SB},
{"DFX", SPT_PMC_BIT_DFX},
{"SCC", SPT_PMC_BIT_SCC},
{"RSVD", SPT_PMC_BIT_RSVD_0C},
{"FUSE", SPT_PMC_BIT_FUSE},
{"CAMERA", SPT_PMC_BIT_CAMREA},
{"RSVD", SPT_PMC_BIT_RSVD_0D},
{"USB3-OTG", SPT_PMC_BIT_USB3_OTG},
{"EXI", SPT_PMC_BIT_EXI},
{"CSE", SPT_PMC_BIT_CSE},
{"CSME_KVM", SPT_PMC_BIT_CSME_KVM},
{"CSME_PMT", SPT_PMC_BIT_CSME_PMT},
{"CSME_CLINK", SPT_PMC_BIT_CSME_CLINK},
{"CSME_PTIO", SPT_PMC_BIT_CSME_PTIO},
{"CSME_USBR", SPT_PMC_BIT_CSME_USBR},
{"CSME_SUSRAM", SPT_PMC_BIT_CSME_SUSRAM},
{"CSME_SMT", SPT_PMC_BIT_CSME_SMT},
{"RSVD", SPT_PMC_BIT_RSVD_1A},
{"CSME_SMS2", SPT_PMC_BIT_CSME_SMS2},
{"CSME_SMS1", SPT_PMC_BIT_CSME_SMS1},
{"CSME_RTC", SPT_PMC_BIT_CSME_RTC},
{"CSME_PSF", SPT_PMC_BIT_CSME_PSF},
{},
};
static const struct pmc_reg_map spt_reg_map = {
.pfear_sts = spt_pfear_map,
.mphy_sts = spt_mphy_map,
.pll_sts = spt_pll_map,
};
static const struct pci_device_id pmc_pci_ids[] = {
{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID), (kernel_ulong_t)NULL },
{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID),
(kernel_ulong_t)&spt_reg_map },
{ 0, },
};
static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset)
{
return readb(pmcdev->regbase + offset);
}
static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
{
return readl(pmcdev->regbase + reg_offset);
}
static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int
reg_offset, u32 val)
{
writel(val, pmcdev->regbase + reg_offset);
}
static inline u32 pmc_core_adjust_slp_s0_step(u32 value)
{
return value * SPT_PMC_SLP_S0_RES_COUNTER_STEP;
@ -90,6 +182,245 @@ static int pmc_core_dev_state_get(void *data, u64 *val)
DEFINE_DEBUGFS_ATTRIBUTE(pmc_core_dev_state, pmc_core_dev_state_get, NULL, "%llu\n");
static int pmc_core_check_read_lock_bit(void)
{
struct pmc_dev *pmcdev = &pmc;
u32 value;
value = pmc_core_reg_read(pmcdev, SPT_PMC_PM_CFG_OFFSET);
return test_bit(SPT_PMC_READ_DISABLE_BIT,
(unsigned long *)&value);
}
#if IS_ENABLED(CONFIG_DEBUG_FS)
static void pmc_core_display_map(struct seq_file *s, int index,
u8 pf_reg, const struct pmc_bit_map *pf_map)
{
seq_printf(s, "PCH IP: %-2d - %-32s\tState: %s\n",
index, pf_map[index].name,
pf_map[index].bit_mask & pf_reg ? "Off" : "On");
}
static int pmc_core_ppfear_sts_show(struct seq_file *s, void *unused)
{
struct pmc_dev *pmcdev = s->private;
const struct pmc_bit_map *map = pmcdev->map->pfear_sts;
u8 pf_regs[NUM_ENTRIES];
int index, iter;
iter = SPT_PMC_XRAM_PPFEAR0A;
for (index = 0; index < NUM_ENTRIES; index++, iter++)
pf_regs[index] = pmc_core_reg_read_byte(pmcdev, iter);
for (index = 0; map[index].name; index++)
pmc_core_display_map(s, index, pf_regs[index / 8], map);
return 0;
}
static int pmc_core_ppfear_sts_open(struct inode *inode, struct file *file)
{
return single_open(file, pmc_core_ppfear_sts_show, inode->i_private);
}
static const struct file_operations pmc_core_ppfear_ops = {
.open = pmc_core_ppfear_sts_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/* This function should return link status, 0 means ready */
static int pmc_core_mtpmc_link_status(void)
{
struct pmc_dev *pmcdev = &pmc;
u32 value;
value = pmc_core_reg_read(pmcdev, SPT_PMC_PM_STS_OFFSET);
return test_bit(SPT_PMC_MSG_FULL_STS_BIT,
(unsigned long *)&value);
}
static int pmc_core_send_msg(u32 *addr_xram)
{
struct pmc_dev *pmcdev = &pmc;
u32 dest;
int timeout;
for (timeout = NUM_RETRIES; timeout > 0; timeout--) {
if (pmc_core_mtpmc_link_status() == 0)
break;
msleep(5);
}
if (timeout <= 0 && pmc_core_mtpmc_link_status())
return -EBUSY;
dest = (*addr_xram & MTPMC_MASK) | (1U << 1);
pmc_core_reg_write(pmcdev, SPT_PMC_MTPMC_OFFSET, dest);
return 0;
}
static int pmc_core_mphy_pg_sts_show(struct seq_file *s, void *unused)
{
struct pmc_dev *pmcdev = s->private;
const struct pmc_bit_map *map = pmcdev->map->mphy_sts;
u32 mphy_core_reg_low, mphy_core_reg_high;
u32 val_low, val_high;
int index, err = 0;
if (pmcdev->pmc_xram_read_bit) {
seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS.");
return 0;
}
mphy_core_reg_low = (SPT_PMC_MPHY_CORE_STS_0 << 16);
mphy_core_reg_high = (SPT_PMC_MPHY_CORE_STS_1 << 16);
mutex_lock(&pmcdev->lock);
if (pmc_core_send_msg(&mphy_core_reg_low) != 0) {
err = -EBUSY;
goto out_unlock;
}
msleep(10);
val_low = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
if (pmc_core_send_msg(&mphy_core_reg_high) != 0) {
err = -EBUSY;
goto out_unlock;
}
msleep(10);
val_high = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
for (index = 0; map[index].name && index < 8; index++) {
seq_printf(s, "%-32s\tState: %s\n",
map[index].name,
map[index].bit_mask & val_low ? "Not power gated" :
"Power gated");
}
for (index = 8; map[index].name; index++) {
seq_printf(s, "%-32s\tState: %s\n",
map[index].name,
map[index].bit_mask & val_high ? "Not power gated" :
"Power gated");
}
out_unlock:
mutex_unlock(&pmcdev->lock);
return err;
}
static int pmc_core_mphy_pg_sts_open(struct inode *inode, struct file *file)
{
return single_open(file, pmc_core_mphy_pg_sts_show, inode->i_private);
}
static const struct file_operations pmc_core_mphy_pg_ops = {
.open = pmc_core_mphy_pg_sts_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int pmc_core_pll_show(struct seq_file *s, void *unused)
{
struct pmc_dev *pmcdev = s->private;
const struct pmc_bit_map *map = pmcdev->map->pll_sts;
u32 mphy_common_reg, val;
int index, err = 0;
if (pmcdev->pmc_xram_read_bit) {
seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS.");
return 0;
}
mphy_common_reg = (SPT_PMC_MPHY_COM_STS_0 << 16);
mutex_lock(&pmcdev->lock);
if (pmc_core_send_msg(&mphy_common_reg) != 0) {
err = -EBUSY;
goto out_unlock;
}
/* Observed PMC HW response latency for MTPMC-MFPMC is ~10 ms */
msleep(10);
val = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
for (index = 0; map[index].name ; index++) {
seq_printf(s, "%-32s\tState: %s\n",
map[index].name,
map[index].bit_mask & val ? "Active" : "Idle");
}
out_unlock:
mutex_unlock(&pmcdev->lock);
return err;
}
static int pmc_core_pll_open(struct inode *inode, struct file *file)
{
return single_open(file, pmc_core_pll_show, inode->i_private);
}
static const struct file_operations pmc_core_pll_ops = {
.open = pmc_core_pll_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static ssize_t pmc_core_ltr_ignore_write(struct file *file, const char __user
*userbuf, size_t count, loff_t *ppos)
{
struct pmc_dev *pmcdev = &pmc;
u32 val, buf_size, fd;
int err = 0;
buf_size = count < 64 ? count : 64;
mutex_lock(&pmcdev->lock);
if (kstrtou32_from_user(userbuf, buf_size, 10, &val)) {
err = -EFAULT;
goto out_unlock;
}
if (val > NUM_IP_IGN_ALLOWED) {
err = -EINVAL;
goto out_unlock;
}
fd = pmc_core_reg_read(pmcdev, SPT_PMC_LTR_IGNORE_OFFSET);
fd |= (1U << val);
pmc_core_reg_write(pmcdev, SPT_PMC_LTR_IGNORE_OFFSET, fd);
out_unlock:
mutex_unlock(&pmcdev->lock);
return err == 0 ? count : err;
}
static int pmc_core_ltr_ignore_show(struct seq_file *s, void *unused)
{
return 0;
}
static int pmc_core_ltr_ignore_open(struct inode *inode, struct file *file)
{
return single_open(file, pmc_core_ltr_ignore_show, inode->i_private);
}
static const struct file_operations pmc_core_ltr_ignore_ops = {
.open = pmc_core_ltr_ignore_open,
.read = seq_read,
.write = pmc_core_ltr_ignore_write,
.llseek = seq_lseek,
.release = single_release,
};
static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
{
debugfs_remove_recursive(pmcdev->dbgfs_dir);
@ -106,20 +437,59 @@ static int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
pmcdev->dbgfs_dir = dir;
file = debugfs_create_file("slp_s0_residency_usec", S_IFREG | S_IRUGO,
dir, pmcdev, &pmc_core_dev_state);
if (!file)
goto err;
if (!file) {
pmc_core_dbgfs_unregister(pmcdev);
return -ENODEV;
}
file = debugfs_create_file("pch_ip_power_gating_status",
S_IFREG | S_IRUGO, dir, pmcdev,
&pmc_core_ppfear_ops);
if (!file)
goto err;
file = debugfs_create_file("mphy_core_lanes_power_gating_status",
S_IFREG | S_IRUGO, dir, pmcdev,
&pmc_core_mphy_pg_ops);
if (!file)
goto err;
file = debugfs_create_file("pll_status",
S_IFREG | S_IRUGO, dir, pmcdev,
&pmc_core_pll_ops);
if (!file)
goto err;
file = debugfs_create_file("ltr_ignore",
S_IFREG | S_IRUGO, dir, pmcdev,
&pmc_core_ltr_ignore_ops);
if (!file)
goto err;
return 0;
err:
pmc_core_dbgfs_unregister(pmcdev);
return -ENODEV;
}
#else
static inline int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
{
return 0;
}
static inline void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
{
}
#endif /* CONFIG_DEBUG_FS */
static const struct x86_cpu_id intel_pmc_core_ids[] = {
{ X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_MOBILE, X86_FEATURE_MWAIT,
(kernel_ulong_t)NULL},
{ X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_DESKTOP, X86_FEATURE_MWAIT,
(kernel_ulong_t)NULL},
{ X86_VENDOR_INTEL, 6, INTEL_FAM6_KABYLAKE_MOBILE, X86_FEATURE_MWAIT,
(kernel_ulong_t)NULL},
{ X86_VENDOR_INTEL, 6, INTEL_FAM6_KABYLAKE_DESKTOP, X86_FEATURE_MWAIT,
(kernel_ulong_t)NULL},
{}
};
@ -128,6 +498,7 @@ static int pmc_core_probe(struct pci_dev *dev, const struct pci_device_id *id)
struct device *ptr_dev = &dev->dev;
struct pmc_dev *pmcdev = &pmc;
const struct x86_cpu_id *cpu_id;
const struct pmc_reg_map *map = (struct pmc_reg_map *)id->driver_data;
int err;
cpu_id = x86_match_cpu(intel_pmc_core_ids);
@ -149,6 +520,7 @@ static int pmc_core_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev_dbg(&dev->dev, "PMC Core: failed to read PCI config space.\n");
return err;
}
pmcdev->base_addr &= PMC_BASE_ADDR_MASK;
dev_dbg(&dev->dev, "PMC Core: PWRMBASE is %#x\n", pmcdev->base_addr);
pmcdev->regbase = devm_ioremap_nocache(ptr_dev,
@ -159,6 +531,10 @@ static int pmc_core_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENOMEM;
}
mutex_init(&pmcdev->lock);
pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
pmcdev->map = map;
err = pmc_core_dbgfs_register(pmcdev);
if (err < 0)
dev_warn(&dev->dev, "PMC Core: debugfs register failed.\n");

View File

@ -26,8 +26,111 @@
#define SPT_PMC_BASE_ADDR_OFFSET 0x48
#define SPT_PMC_SLP_S0_RES_COUNTER_OFFSET 0x13c
#define SPT_PMC_MMIO_REG_LEN 0x100
#define SPT_PMC_PM_CFG_OFFSET 0x18
#define SPT_PMC_PM_STS_OFFSET 0x1c
#define SPT_PMC_MTPMC_OFFSET 0x20
#define SPT_PMC_MFPMC_OFFSET 0x38
#define SPT_PMC_LTR_IGNORE_OFFSET 0x30C
#define SPT_PMC_MPHY_CORE_STS_0 0x1143
#define SPT_PMC_MPHY_CORE_STS_1 0x1142
#define SPT_PMC_MPHY_COM_STS_0 0x1155
#define SPT_PMC_MMIO_REG_LEN 0x1000
#define SPT_PMC_SLP_S0_RES_COUNTER_STEP 0x64
#define PMC_BASE_ADDR_MASK ~(SPT_PMC_MMIO_REG_LEN - 1)
#define MTPMC_MASK 0xffff0000
#define NUM_ENTRIES 5
#define SPT_PMC_READ_DISABLE_BIT 0x16
#define SPT_PMC_MSG_FULL_STS_BIT 0x18
#define NUM_RETRIES 100
#define NUM_IP_IGN_ALLOWED 17
/* Sunrise Point: PGD PFET Enable Ack Status Registers */
enum ppfear_regs {
SPT_PMC_XRAM_PPFEAR0A = 0x590,
SPT_PMC_XRAM_PPFEAR0B,
SPT_PMC_XRAM_PPFEAR0C,
SPT_PMC_XRAM_PPFEAR0D,
SPT_PMC_XRAM_PPFEAR1A,
};
#define SPT_PMC_BIT_PMC BIT(0)
#define SPT_PMC_BIT_OPI BIT(1)
#define SPT_PMC_BIT_SPI BIT(2)
#define SPT_PMC_BIT_XHCI BIT(3)
#define SPT_PMC_BIT_SPA BIT(4)
#define SPT_PMC_BIT_SPB BIT(5)
#define SPT_PMC_BIT_SPC BIT(6)
#define SPT_PMC_BIT_GBE BIT(7)
#define SPT_PMC_BIT_SATA BIT(0)
#define SPT_PMC_BIT_HDA_PGD0 BIT(1)
#define SPT_PMC_BIT_HDA_PGD1 BIT(2)
#define SPT_PMC_BIT_HDA_PGD2 BIT(3)
#define SPT_PMC_BIT_HDA_PGD3 BIT(4)
#define SPT_PMC_BIT_RSVD_0B BIT(5)
#define SPT_PMC_BIT_LPSS BIT(6)
#define SPT_PMC_BIT_LPC BIT(7)
#define SPT_PMC_BIT_SMB BIT(0)
#define SPT_PMC_BIT_ISH BIT(1)
#define SPT_PMC_BIT_P2SB BIT(2)
#define SPT_PMC_BIT_DFX BIT(3)
#define SPT_PMC_BIT_SCC BIT(4)
#define SPT_PMC_BIT_RSVD_0C BIT(5)
#define SPT_PMC_BIT_FUSE BIT(6)
#define SPT_PMC_BIT_CAMREA BIT(7)
#define SPT_PMC_BIT_RSVD_0D BIT(0)
#define SPT_PMC_BIT_USB3_OTG BIT(1)
#define SPT_PMC_BIT_EXI BIT(2)
#define SPT_PMC_BIT_CSE BIT(3)
#define SPT_PMC_BIT_CSME_KVM BIT(4)
#define SPT_PMC_BIT_CSME_PMT BIT(5)
#define SPT_PMC_BIT_CSME_CLINK BIT(6)
#define SPT_PMC_BIT_CSME_PTIO BIT(7)
#define SPT_PMC_BIT_CSME_USBR BIT(0)
#define SPT_PMC_BIT_CSME_SUSRAM BIT(1)
#define SPT_PMC_BIT_CSME_SMT BIT(2)
#define SPT_PMC_BIT_RSVD_1A BIT(3)
#define SPT_PMC_BIT_CSME_SMS2 BIT(4)
#define SPT_PMC_BIT_CSME_SMS1 BIT(5)
#define SPT_PMC_BIT_CSME_RTC BIT(6)
#define SPT_PMC_BIT_CSME_PSF BIT(7)
#define SPT_PMC_BIT_MPHY_LANE0 BIT(0)
#define SPT_PMC_BIT_MPHY_LANE1 BIT(1)
#define SPT_PMC_BIT_MPHY_LANE2 BIT(2)
#define SPT_PMC_BIT_MPHY_LANE3 BIT(3)
#define SPT_PMC_BIT_MPHY_LANE4 BIT(4)
#define SPT_PMC_BIT_MPHY_LANE5 BIT(5)
#define SPT_PMC_BIT_MPHY_LANE6 BIT(6)
#define SPT_PMC_BIT_MPHY_LANE7 BIT(7)
#define SPT_PMC_BIT_MPHY_LANE8 BIT(0)
#define SPT_PMC_BIT_MPHY_LANE9 BIT(1)
#define SPT_PMC_BIT_MPHY_LANE10 BIT(2)
#define SPT_PMC_BIT_MPHY_LANE11 BIT(3)
#define SPT_PMC_BIT_MPHY_LANE12 BIT(4)
#define SPT_PMC_BIT_MPHY_LANE13 BIT(5)
#define SPT_PMC_BIT_MPHY_LANE14 BIT(6)
#define SPT_PMC_BIT_MPHY_LANE15 BIT(7)
#define SPT_PMC_BIT_MPHY_CMN_LANE0 BIT(0)
#define SPT_PMC_BIT_MPHY_CMN_LANE1 BIT(1)
#define SPT_PMC_BIT_MPHY_CMN_LANE2 BIT(2)
#define SPT_PMC_BIT_MPHY_CMN_LANE3 BIT(3)
struct pmc_bit_map {
const char *name;
u32 bit_mask;
};
struct pmc_reg_map {
const struct pmc_bit_map *pfear_sts;
const struct pmc_bit_map *mphy_sts;
const struct pmc_bit_map *pll_sts;
};
/**
* struct pmc_dev - pmc device structure
@ -43,8 +146,13 @@
struct pmc_dev {
u32 base_addr;
void __iomem *regbase;
const struct pmc_reg_map *map;
#if IS_ENABLED(CONFIG_DEBUG_FS)
struct dentry *dbgfs_dir;
#endif /* CONFIG_DEBUG_FS */
bool has_slp_s0_res;
int pmc_xram_read_bit;
struct mutex lock; /* generic mutex lock for PMC Core */
};
#endif /* PMC_CORE_H */

View File

@ -0,0 +1,515 @@
/*
* drivers/platform/x86/mlxcpld-hotplug.c
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_data/mlxcpld-hotplug.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
/* Offset of event and mask registers from status register */
#define MLXCPLD_HOTPLUG_EVENT_OFF 1
#define MLXCPLD_HOTPLUG_MASK_OFF 2
#define MLXCPLD_HOTPLUG_AGGR_MASK_OFF 1
#define MLXCPLD_HOTPLUG_ATTRS_NUM 8
/**
* enum mlxcpld_hotplug_attr_type - sysfs attributes for hotplug events:
* @MLXCPLD_HOTPLUG_ATTR_TYPE_PSU: power supply unit attribute;
* @MLXCPLD_HOTPLUG_ATTR_TYPE_PWR: power cable attribute;
* @MLXCPLD_HOTPLUG_ATTR_TYPE_FAN: FAN drawer attribute;
*/
enum mlxcpld_hotplug_attr_type {
MLXCPLD_HOTPLUG_ATTR_TYPE_PSU,
MLXCPLD_HOTPLUG_ATTR_TYPE_PWR,
MLXCPLD_HOTPLUG_ATTR_TYPE_FAN,
};
/**
* struct mlxcpld_hotplug_priv_data - platform private data:
* @irq: platform interrupt number;
* @pdev: platform device;
* @plat: platform data;
* @hwmon: hwmon device;
* @mlxcpld_hotplug_attr: sysfs attributes array;
* @mlxcpld_hotplug_dev_attr: sysfs sensor device attribute array;
* @group: sysfs attribute group;
* @groups: list of sysfs attribute group for hwmon registration;
* @dwork: delayed work template;
* @lock: spin lock;
* @aggr_cache: last value of aggregation register status;
* @psu_cache: last value of PSU register status;
* @pwr_cache: last value of power register status;
* @fan_cache: last value of FAN register status;
*/
struct mlxcpld_hotplug_priv_data {
int irq;
struct platform_device *pdev;
struct mlxcpld_hotplug_platform_data *plat;
struct device *hwmon;
struct attribute *mlxcpld_hotplug_attr[MLXCPLD_HOTPLUG_ATTRS_NUM + 1];
struct sensor_device_attribute_2
mlxcpld_hotplug_dev_attr[MLXCPLD_HOTPLUG_ATTRS_NUM];
struct attribute_group group;
const struct attribute_group *groups[2];
struct delayed_work dwork;
spinlock_t lock;
u8 aggr_cache;
u8 psu_cache;
u8 pwr_cache;
u8 fan_cache;
};
static ssize_t mlxcpld_hotplug_attr_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct platform_device *pdev = to_platform_device(dev);
struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev);
int index = to_sensor_dev_attr_2(attr)->index;
int nr = to_sensor_dev_attr_2(attr)->nr;
u8 reg_val = 0;
switch (nr) {
case MLXCPLD_HOTPLUG_ATTR_TYPE_PSU:
/* Bit = 0 : PSU is present. */
reg_val = !!!(inb(priv->plat->psu_reg_offset) & BIT(index));
break;
case MLXCPLD_HOTPLUG_ATTR_TYPE_PWR:
/* Bit = 1 : power cable is attached. */
reg_val = !!(inb(priv->plat->pwr_reg_offset) & BIT(index %
priv->plat->pwr_count));
break;
case MLXCPLD_HOTPLUG_ATTR_TYPE_FAN:
/* Bit = 0 : FAN is present. */
reg_val = !!!(inb(priv->plat->fan_reg_offset) & BIT(index %
priv->plat->fan_count));
break;
}
return sprintf(buf, "%u\n", reg_val);
}
#define PRIV_ATTR(i) priv->mlxcpld_hotplug_attr[i]
#define PRIV_DEV_ATTR(i) priv->mlxcpld_hotplug_dev_attr[i]
static int mlxcpld_hotplug_attr_init(struct mlxcpld_hotplug_priv_data *priv)
{
int num_attrs = priv->plat->psu_count + priv->plat->pwr_count +
priv->plat->fan_count;
int i;
priv->group.attrs = devm_kzalloc(&priv->pdev->dev, num_attrs *
sizeof(struct attribute *),
GFP_KERNEL);
if (!priv->group.attrs)
return -ENOMEM;
for (i = 0; i < num_attrs; i++) {
PRIV_ATTR(i) = &PRIV_DEV_ATTR(i).dev_attr.attr;
if (i < priv->plat->psu_count) {
PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
GFP_KERNEL, "psu%u", i + 1);
PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PSU;
} else if (i < priv->plat->psu_count + priv->plat->pwr_count) {
PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
GFP_KERNEL, "pwr%u", i %
priv->plat->pwr_count + 1);
PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PWR;
} else {
PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
GFP_KERNEL, "fan%u", i %
priv->plat->fan_count + 1);
PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_FAN;
}
if (!PRIV_ATTR(i)->name) {
dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n",
i + 1);
return -ENOMEM;
}
PRIV_DEV_ATTR(i).dev_attr.attr.name = PRIV_ATTR(i)->name;
PRIV_DEV_ATTR(i).dev_attr.attr.mode = S_IRUGO;
PRIV_DEV_ATTR(i).dev_attr.show = mlxcpld_hotplug_attr_show;
PRIV_DEV_ATTR(i).index = i;
sysfs_attr_init(&PRIV_DEV_ATTR(i).dev_attr.attr);
}
priv->group.attrs = priv->mlxcpld_hotplug_attr;
priv->groups[0] = &priv->group;
priv->groups[1] = NULL;
return 0;
}
static int mlxcpld_hotplug_device_create(struct device *dev,
struct mlxcpld_hotplug_device *item)
{
item->adapter = i2c_get_adapter(item->bus);
if (!item->adapter) {
dev_err(dev, "Failed to get adapter for bus %d\n",
item->bus);
return -EFAULT;
}
item->client = i2c_new_device(item->adapter, &item->brdinfo);
if (!item->client) {
dev_err(dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
item->brdinfo.type, item->bus, item->brdinfo.addr);
i2c_put_adapter(item->adapter);
item->adapter = NULL;
return -EFAULT;
}
return 0;
}
static void mlxcpld_hotplug_device_destroy(struct mlxcpld_hotplug_device *item)
{
if (item->client) {
i2c_unregister_device(item->client);
item->client = NULL;
}
if (item->adapter) {
i2c_put_adapter(item->adapter);
item->adapter = NULL;
}
}
static inline void
mlxcpld_hotplug_work_helper(struct device *dev,
struct mlxcpld_hotplug_device *item, u8 is_inverse,
u16 offset, u8 mask, u8 *cache)
{
u8 val, asserted;
int bit;
/* Mask event. */
outb(0, offset + MLXCPLD_HOTPLUG_MASK_OFF);
/* Read status. */
val = inb(offset) & mask;
asserted = *cache ^ val;
*cache = val;
/*
* Validate if item related to received signal type is valid.
* It should never happen, excepted the situation when some
* piece of hardware is broken. In such situation just produce
* error message and return. Caller must continue to handle the
* signals from other devices if any.
*/
if (unlikely(!item)) {
dev_err(dev, "False signal is received: register at offset 0x%02x, mask 0x%02x.\n",
offset, mask);
return;
}
for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
if (val & BIT(bit)) {
if (is_inverse)
mlxcpld_hotplug_device_destroy(item + bit);
else
mlxcpld_hotplug_device_create(dev, item + bit);
} else {
if (is_inverse)
mlxcpld_hotplug_device_create(dev, item + bit);
else
mlxcpld_hotplug_device_destroy(item + bit);
}
}
/* Acknowledge event. */
outb(0, offset + MLXCPLD_HOTPLUG_EVENT_OFF);
/* Unmask event. */
outb(mask, offset + MLXCPLD_HOTPLUG_MASK_OFF);
}
/*
* mlxcpld_hotplug_work_handler - performs traversing of CPLD interrupt
* registers according to the below hierarchy schema:
*
* Aggregation registers (status/mask)
* PSU registers: *---*
* *-----------------* | |
* |status/event/mask|----->| * |
* *-----------------* | |
* Power registers: | |
* *-----------------* | |
* |status/event/mask|----->| * |---> CPU
* *-----------------* | |
* FAN registers:
* *-----------------* | |
* |status/event/mask|----->| * |
* *-----------------* | |
* *---*
* In case some system changed are detected: FAN in/out, PSU in/out, power
* cable attached/detached, relevant device is created or destroyed.
*/
static void mlxcpld_hotplug_work_handler(struct work_struct *work)
{
struct mlxcpld_hotplug_priv_data *priv = container_of(work,
struct mlxcpld_hotplug_priv_data, dwork.work);
u8 val, aggr_asserted;
unsigned long flags;
/* Mask aggregation event. */
outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
/* Read aggregation status. */
val = inb(priv->plat->top_aggr_offset) & priv->plat->top_aggr_mask;
aggr_asserted = priv->aggr_cache ^ val;
priv->aggr_cache = val;
/* Handle PSU configuration changes. */
if (aggr_asserted & priv->plat->top_aggr_psu_mask)
mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->psu,
1, priv->plat->psu_reg_offset,
priv->plat->psu_mask,
&priv->psu_cache);
/* Handle power cable configuration changes. */
if (aggr_asserted & priv->plat->top_aggr_pwr_mask)
mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->pwr,
0, priv->plat->pwr_reg_offset,
priv->plat->pwr_mask,
&priv->pwr_cache);
/* Handle FAN configuration changes. */
if (aggr_asserted & priv->plat->top_aggr_fan_mask)
mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->fan,
1, priv->plat->fan_reg_offset,
priv->plat->fan_mask,
&priv->fan_cache);
if (aggr_asserted) {
spin_lock_irqsave(&priv->lock, flags);
/*
* It is possible, that some signals have been inserted, while
* interrupt has been masked by mlxcpld_hotplug_work_handler.
* In this case such signals will be missed. In order to handle
* these signals delayed work is canceled and work task
* re-scheduled for immediate execution. It allows to handle
* missed signals, if any. In other case work handler just
* validates that no new signals have been received during
* masking.
*/
cancel_delayed_work(&priv->dwork);
schedule_delayed_work(&priv->dwork, 0);
spin_unlock_irqrestore(&priv->lock, flags);
return;
}
/* Unmask aggregation event (no need acknowledge). */
outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
}
static void mlxcpld_hotplug_set_irq(struct mlxcpld_hotplug_priv_data *priv)
{
/* Clear psu presense event. */
outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
/* Set psu initial status as mask and unmask psu event. */
priv->psu_cache = priv->plat->psu_mask;
outb(priv->plat->psu_mask, priv->plat->psu_reg_offset +
MLXCPLD_HOTPLUG_MASK_OFF);
/* Clear power cable event. */
outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
/* Keep power initial status as zero and unmask power event. */
outb(priv->plat->pwr_mask, priv->plat->pwr_reg_offset +
MLXCPLD_HOTPLUG_MASK_OFF);
/* Clear fan presense event. */
outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
/* Set fan initial status as mask and unmask fan event. */
priv->fan_cache = priv->plat->fan_mask;
outb(priv->plat->fan_mask, priv->plat->fan_reg_offset +
MLXCPLD_HOTPLUG_MASK_OFF);
/* Keep aggregation initial status as zero and unmask events. */
outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
/* Invoke work handler for initializing hot plug devices setting. */
mlxcpld_hotplug_work_handler(&priv->dwork.work);
enable_irq(priv->irq);
}
static void mlxcpld_hotplug_unset_irq(struct mlxcpld_hotplug_priv_data *priv)
{
int i;
disable_irq(priv->irq);
cancel_delayed_work_sync(&priv->dwork);
/* Mask aggregation event. */
outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
/* Mask psu presense event. */
outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
/* Clear psu presense event. */
outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
/* Mask power cable event. */
outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
/* Clear power cable event. */
outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
/* Mask fan presense event. */
outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
/* Clear fan presense event. */
outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
/* Remove all the attached devices. */
for (i = 0; i < priv->plat->psu_count; i++)
mlxcpld_hotplug_device_destroy(priv->plat->psu + i);
for (i = 0; i < priv->plat->pwr_count; i++)
mlxcpld_hotplug_device_destroy(priv->plat->pwr + i);
for (i = 0; i < priv->plat->fan_count; i++)
mlxcpld_hotplug_device_destroy(priv->plat->fan + i);
}
static irqreturn_t mlxcpld_hotplug_irq_handler(int irq, void *dev)
{
struct mlxcpld_hotplug_priv_data *priv =
(struct mlxcpld_hotplug_priv_data *)dev;
/* Schedule work task for immediate execution.*/
schedule_delayed_work(&priv->dwork, 0);
return IRQ_HANDLED;
}
static int mlxcpld_hotplug_probe(struct platform_device *pdev)
{
struct mlxcpld_hotplug_platform_data *pdata;
struct mlxcpld_hotplug_priv_data *priv;
int err;
pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "Failed to get platform data.\n");
return -EINVAL;
}
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->pdev = pdev;
priv->plat = pdata;
priv->irq = platform_get_irq(pdev, 0);
if (priv->irq < 0) {
dev_err(&pdev->dev, "Failed to get platform irq: %d\n",
priv->irq);
return priv->irq;
}
err = devm_request_irq(&pdev->dev, priv->irq,
mlxcpld_hotplug_irq_handler, 0, pdev->name,
priv);
if (err) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", err);
return err;
}
disable_irq(priv->irq);
INIT_DELAYED_WORK(&priv->dwork, mlxcpld_hotplug_work_handler);
spin_lock_init(&priv->lock);
err = mlxcpld_hotplug_attr_init(priv);
if (err) {
dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", err);
return err;
}
priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
"mlxcpld_hotplug", priv, priv->groups);
if (IS_ERR(priv->hwmon)) {
dev_err(&pdev->dev, "Failed to register hwmon device %ld\n",
PTR_ERR(priv->hwmon));
return PTR_ERR(priv->hwmon);
}
platform_set_drvdata(pdev, priv);
/* Perform initial interrupts setup. */
mlxcpld_hotplug_set_irq(priv);
return 0;
}
static int mlxcpld_hotplug_remove(struct platform_device *pdev)
{
struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev);
/* Clean interrupts setup. */
mlxcpld_hotplug_unset_irq(priv);
return 0;
}
static struct platform_driver mlxcpld_hotplug_driver = {
.driver = {
.name = "mlxcpld-hotplug",
},
.probe = mlxcpld_hotplug_probe,
.remove = mlxcpld_hotplug_remove,
};
module_platform_driver(mlxcpld_hotplug_driver);
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
MODULE_DESCRIPTION("Mellanox CPLD hotplug platform driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("platform:mlxcpld-hotplug");

View File

@ -458,7 +458,7 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc)
rc = acpi_evaluate_integer(pcc->handle, METHOD_HKEY_QUERY,
NULL, &result);
if (!ACPI_SUCCESS(rc)) {
if (ACPI_FAILURE(rc)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"error getting hotkey status\n"));
return;

View File

@ -128,6 +128,7 @@ enum {
/* ACPI HIDs */
#define TPACPI_ACPI_IBM_HKEY_HID "IBM0068"
#define TPACPI_ACPI_LENOVO_HKEY_HID "LEN0068"
#define TPACPI_ACPI_LENOVO_HKEY_V2_HID "LEN0268"
#define TPACPI_ACPI_EC_HID "PNP0C09"
/* Input IDs */
@ -190,6 +191,9 @@ enum tpacpi_hkey_event_t {
TP_HKEY_EV_LID_OPEN = 0x5002, /* laptop lid opened */
TP_HKEY_EV_TABLET_TABLET = 0x5009, /* tablet swivel up */
TP_HKEY_EV_TABLET_NOTEBOOK = 0x500a, /* tablet swivel down */
TP_HKEY_EV_TABLET_CHANGED = 0x60c0, /* X1 Yoga (2016):
* enter/leave tablet mode
*/
TP_HKEY_EV_PEN_INSERTED = 0x500b, /* tablet pen inserted */
TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */
TP_HKEY_EV_BRGHT_CHANGED = 0x5010, /* backlight control event */
@ -302,7 +306,12 @@ static struct {
u32 hotkey:1;
u32 hotkey_mask:1;
u32 hotkey_wlsw:1;
u32 hotkey_tablet:1;
enum {
TP_HOTKEY_TABLET_NONE = 0,
TP_HOTKEY_TABLET_USES_MHKG,
/* X1 Yoga 2016, seen on BIOS N1FET44W */
TP_HOTKEY_TABLET_USES_CMMD,
} hotkey_tablet;
u32 kbdlight:1;
u32 light:1;
u32 light_status:1;
@ -2059,6 +2068,8 @@ static void hotkey_poll_setup(const bool may_warn);
/* HKEY.MHKG() return bits */
#define TP_HOTKEY_TABLET_MASK (1 << 3)
/* ThinkPad X1 Yoga (2016) */
#define TP_EC_CMMD_TABLET_MODE 0x6
static int hotkey_get_wlsw(void)
{
@ -2083,10 +2094,23 @@ static int hotkey_get_tablet_mode(int *status)
{
int s;
if (!acpi_evalf(hkey_handle, &s, "MHKG", "d"))
return -EIO;
switch (tp_features.hotkey_tablet) {
case TP_HOTKEY_TABLET_USES_MHKG:
if (!acpi_evalf(hkey_handle, &s, "MHKG", "d"))
return -EIO;
*status = ((s & TP_HOTKEY_TABLET_MASK) != 0);
break;
case TP_HOTKEY_TABLET_USES_CMMD:
if (!acpi_evalf(ec_handle, &s, "CMMD", "d"))
return -EIO;
*status = (s == TP_EC_CMMD_TABLET_MODE);
break;
default:
break;
}
*status = ((s & TP_HOTKEY_TABLET_MASK) != 0);
return 0;
}
@ -3117,6 +3141,37 @@ static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
typedef u16 tpacpi_keymap_entry_t;
typedef tpacpi_keymap_entry_t tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
static int hotkey_init_tablet_mode(void)
{
int in_tablet_mode = 0, res;
char *type = NULL;
if (acpi_evalf(hkey_handle, &res, "MHKG", "qd")) {
/* For X41t, X60t, X61t Tablets... */
tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_MHKG;
in_tablet_mode = !!(res & TP_HOTKEY_TABLET_MASK);
type = "MHKG";
} else if (acpi_evalf(ec_handle, &res, "CMMD", "qd")) {
/* For X1 Yoga (2016) */
tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_CMMD;
in_tablet_mode = res == TP_EC_CMMD_TABLET_MODE;
type = "CMMD";
}
if (!tp_features.hotkey_tablet)
return 0;
pr_info("Tablet mode switch found (type: %s), currently in %s mode\n",
type, in_tablet_mode ? "tablet" : "laptop");
res = add_to_attr_set(hotkey_dev_attributes,
&dev_attr_hotkey_tablet_mode.attr);
if (res)
return -1;
return in_tablet_mode;
}
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
@ -3464,21 +3519,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
res = add_to_attr_set(hotkey_dev_attributes,
&dev_attr_hotkey_radio_sw.attr);
/* For X41t, X60t, X61t Tablets... */
if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
tp_features.hotkey_tablet = 1;
tabletsw_state = !!(status & TP_HOTKEY_TABLET_MASK);
pr_info("possible tablet mode switch found; "
"ThinkPad in %s mode\n",
(tabletsw_state) ? "tablet" : "laptop");
res = add_to_attr_set(hotkey_dev_attributes,
&dev_attr_hotkey_tablet_mode.attr);
}
res = hotkey_init_tablet_mode();
if (res < 0)
goto err_exit;
if (!res)
res = register_attr_set_with_sysfs(
hotkey_dev_attributes,
&tpacpi_pdev->dev.kobj);
tabletsw_state = res;
res = register_attr_set_with_sysfs(hotkey_dev_attributes,
&tpacpi_pdev->dev.kobj);
if (res)
goto err_exit;
@ -3899,6 +3947,12 @@ static bool hotkey_notify_6xxx(const u32 hkey,
*ignore_acpi_ev = true;
return true;
case TP_HKEY_EV_TABLET_CHANGED:
tpacpi_input_send_tabletsw();
hotkey_tablet_mode_notify_change();
*send_acpi_ev = false;
break;
default:
pr_warn("unknown possible thermal alarm or keyboard event received\n");
known = false;
@ -4143,6 +4197,7 @@ errexit:
static const struct acpi_device_id ibm_htk_device_ids[] = {
{TPACPI_ACPI_IBM_HKEY_HID, 0},
{TPACPI_ACPI_LENOVO_HKEY_HID, 0},
{TPACPI_ACPI_LENOVO_HKEY_V2_HID, 0},
{"", 0},
};
@ -7716,7 +7771,7 @@ static struct ibm_struct volume_driver_data = {
#define alsa_card NULL
static void inline volume_alsa_notify_change(void)
static inline void volume_alsa_notify_change(void)
{
}
@ -9018,7 +9073,7 @@ static int mute_led_on_off(struct tp_led_table *t, bool state)
acpi_handle temp;
int output;
if (!ACPI_SUCCESS(acpi_get_handle(hkey_handle, t->name, &temp))) {
if (ACPI_FAILURE(acpi_get_handle(hkey_handle, t->name, &temp))) {
pr_warn("Thinkpad ACPI has no %s interface.\n", t->name);
return -EIO;
}

View File

@ -0,0 +1,99 @@
/*
* include/linux/platform_data/mlxcpld-hotplug.h
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H
#define __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H
/**
* struct mlxcpld_hotplug_device - I2C device data:
* @adapter: I2C device adapter;
* @client: I2C device client;
* @brdinfo: device board information;
* @bus: I2C bus, where device is attached;
*
* Structure represents I2C hotplug device static data (board topology) and
* dynamic data (related kernel objects handles).
*/
struct mlxcpld_hotplug_device {
struct i2c_adapter *adapter;
struct i2c_client *client;
struct i2c_board_info brdinfo;
u16 bus;
};
/**
* struct mlxcpld_hotplug_platform_data - device platform data:
* @top_aggr_offset: offset of top aggregation interrupt register;
* @top_aggr_mask: top aggregation interrupt common mask;
* @top_aggr_psu_mask: top aggregation interrupt PSU mask;
* @psu_reg_offset: offset of PSU interrupt register;
* @psu_mask: PSU interrupt mask;
* @psu_count: number of equipped replaceable PSUs;
* @psu: pointer to PSU devices data array;
* @top_aggr_pwr_mask: top aggregation interrupt power mask;
* @pwr_reg_offset: offset of power interrupt register
* @pwr_mask: power interrupt mask;
* @pwr_count: number of power sources;
* @pwr: pointer to power devices data array;
* @top_aggr_fan_mask: top aggregation interrupt FAN mask;
* @fan_reg_offset: offset of FAN interrupt register;
* @fan_mask: FAN interrupt mask;
* @fan_count: number of equipped replaceable FANs;
* @fan: pointer to FAN devices data array;
*
* Structure represents board platform data, related to system hotplug events,
* like FAN, PSU, power cable insertion and removing. This data provides the
* number of hot-pluggable devices and hardware description for event handling.
*/
struct mlxcpld_hotplug_platform_data {
u16 top_aggr_offset;
u8 top_aggr_mask;
u8 top_aggr_psu_mask;
u16 psu_reg_offset;
u8 psu_mask;
u8 psu_count;
struct mlxcpld_hotplug_device *psu;
u8 top_aggr_pwr_mask;
u16 pwr_reg_offset;
u8 pwr_mask;
u8 pwr_count;
struct mlxcpld_hotplug_device *pwr;
u8 top_aggr_fan_mask;
u16 fan_reg_offset;
u8 fan_mask;
u8 fan_count;
struct mlxcpld_hotplug_device *fan;
};
#endif /* __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H */