leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

irqchip: renesas-intc-irqpin: r8a7779 IRLM setup support

Browse Source 
Add r8a7779 specific support for IRLM bit configuration
in the INTC-IRQPIN driver. Without this code we need
special workaround code in arch/arm/mach-shmobile.

The IRLM bit for the INTC hardware exists on various
older SH-based SoCs and is used to select between two
modes for the external interrupt pins IRQ0 to IRQ3:

IRLM = 0: (default from reset on r8a7779)
In this mode the pins IRQ0 to IRQ3 are used together
to give a value between 0 and 15 to the SoC. External
logic is required for masking. This mode is not
supported by the INTC-IRQPIN driver.

IRLM = 1: (needs this patch or configuration elsewhere)
In this mode IRQ0 to IRQ3 operate as 4 individual
external interrupt pins. In this mode the SMSC ethernet
chip can be used via IRQ1 on r8a7779 Marzen. This mode
is the only supported mode by the INTC-IRQPIN driver.

For this patch to work the r8a7779 DTS needs to pass
the ICR0 register as the last register bank.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: horms@verge.net.au
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/20141203121803.5936.35881.sendpatchset@w520
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit is contained in:
Magnus Damm 2014-12-03 21:18:03 +09:00 committed by Thomas Gleixner
parent 64c96a57b7
commit e03f9088e2
2 changed files with 46 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
View File

@ -9,6 +9,11 @@ Required properties:
- "renesas,intc-irqpin-r8a7778" (R-Car M1A)
- "renesas,intc-irqpin-r8a7779" (R-Car H1)
- "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5)
- reg: Base address and length of each register bank used by the external
IRQ pins driven by the interrupt controller hardware module. The base
addresses, length and number of required register banks varies with soctype.
- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
interrupts.txt in this directory

50
drivers/irqchip/irq-renesas-intc-irqpin.c
View File

@ -30,6 +30,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/pm_runtime.h>
@ -40,7 +41,9 @@
#define INTC_IRQPIN_REG_SOURCE 2 /* INTREQnn */
#define INTC_IRQPIN_REG_MASK 3 /* INTMSKnn */
#define INTC_IRQPIN_REG_CLEAR 4 /* INTMSKCLRnn */
#define INTC_IRQPIN_REG_NR 5
#define INTC_IRQPIN_REG_NR_MANDATORY 5
#define INTC_IRQPIN_REG_IRLM 5 /* ICR0 with IRLM bit (optional) */
#define INTC_IRQPIN_REG_NR 6
/* INTC external IRQ PIN hardware register access:
*
@ -82,6 +85,10 @@ struct intc_irqpin_priv {
u8 shared_irq_mask;
};
struct intc_irqpin_irlm_config {
unsigned int irlm_bit;
};
static unsigned long intc_irqpin_read32(void __iomem *iomem)
{
return ioread32(iomem);
@ -345,10 +352,23 @@ static struct irq_domain_ops intc_irqpin_irq_domain_ops = {
.xlate = irq_domain_xlate_twocell,
};
static const struct intc_irqpin_irlm_config intc_irqpin_irlm_r8a7779 = {
.irlm_bit = 23, /* ICR0.IRLM0 */
};
static const struct of_device_id intc_irqpin_dt_ids[] = {
{ .compatible = "renesas,intc-irqpin", },
{ .compatible = "renesas,intc-irqpin-r8a7779",
.data = &intc_irqpin_irlm_r8a7779 },
{},
};
MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids);
static int intc_irqpin_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct renesas_intc_irqpin_config *pdata = dev->platform_data;
const struct of_device_id *of_id;
struct intc_irqpin_priv *p;
struct intc_irqpin_iomem *i;
struct resource *io[INTC_IRQPIN_REG_NR];
@ -391,10 +411,11 @@ static int intc_irqpin_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
/* get hold of manadatory IOMEM */
/* get hold of register banks */
memset(io, 0, sizeof(io));
for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
io[k] = platform_get_resource(pdev, IORESOURCE_MEM, k);
if (!io[k]) {
if (!io[k] && k < INTC_IRQPIN_REG_NR_MANDATORY) {
dev_err(dev, "not enough IOMEM resources\n");
ret = -EINVAL;
goto err0;
@ -422,6 +443,10 @@ static int intc_irqpin_probe(struct platform_device *pdev)
for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
i = &p->iomem[k];
/* handle optional registers */
if (!io[k])
continue;
switch (resource_size(io[k])) {
case 1:
i->width = 8;
@ -448,6 +473,19 @@ static int intc_irqpin_probe(struct platform_device *pdev)
}
}
/* configure "individual IRQ mode" where needed */
of_id = of_match_device(intc_irqpin_dt_ids, dev);
if (of_id && of_id->data) {
const struct intc_irqpin_irlm_config *irlm_config = of_id->data;
if (io[INTC_IRQPIN_REG_IRLM])
intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_IRLM,
irlm_config->irlm_bit,
1, 1);
else
dev_warn(dev, "unable to select IRLM mode\n");
}
/* mask all interrupts using priority */
for (k = 0; k < p->number_of_irqs; k++)
intc_irqpin_mask_unmask_prio(p, k, 1);
@ -550,12 +588,6 @@ static int intc_irqpin_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id intc_irqpin_dt_ids[] = {
{ .compatible = "renesas,intc-irqpin", },
{},
};
MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids);
static struct platform_driver intc_irqpin_device_driver = {
.probe = intc_irqpin_probe,
.remove = intc_irqpin_remove,