forked from Minki/linux
mxs device tree changes for 3.9
- Mostly cfa100xx related device tree source updates -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJREKBFAAoJEFBXWFqHsHzOdVwH/2x2a0mJi9Y/mE0y5ZSn/Ktj bYIOJt4wjq15/rYcSzCrZtJ+u4+JwP7C06z0oTtNeiIw2kHuAiUTVrTBdaf60k4f 2FauaoX9koedCsBP2JPVAq5ZVE8BdAbj4inuoNUFJeN/pkH8Q5+PWQZbgxAYeN58 X//DUXPq8L2tNWdEl/F+DIYwH/y9ck01tV2Fyy6AItjEShStOCglootmmtzXoyj0 /8bOmc2ppdePofAd+M/5B+JE5S18WbakrdfNp8qVwBlYzjsUvFgz9Vwkbn81jPzJ 5Hx/vDiZFktqMuI6726DJ/oqxP0w+GqYzw657LdIKqS3zCbLGb752iaM/vPgo0c= =SM0I -----END PGP SIGNATURE----- Merge tag 'mxs-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt From Shawn Guo: mxs device tree changes for 3.9 - Mostly cfa100xx related device tree source updates * tag 'mxs-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: dts: Add rotary encoder to the CFA-10049 ARM: mxs: dts: Add gpio-keys for the rotary to the CFA-10049 ARM: dts: mxs: Add the LCD to the 10049 board ARM: dts: mxs: Add muxing options for the third PWM ARM: dts: cfa10049: Change the SPI3 bus to spi-gpio ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support ARM: mxs: Enable touchscreen on m28evk ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree
This commit is contained in:
Olof Johansson
commit
dd8b5c8dac
@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
|
||||
imx28-apf28dev.dtb \
|
||||
imx28-apx4devkit.dtb \
|
||||
imx28-cfa10036.dtb \
|
||||
imx28-cfa10037.dtb \
|
||||
imx28-cfa10049.dtb \
|
||||
imx28-evk.dtb \
|
||||
imx28-m28evk.dtb \
|
||||
|
||||
77
arch/arm/boot/dts/imx28-cfa10037.dts
Normal file
77
arch/arm/boot/dts/imx28-cfa10037.dts
Normal file
@ -0,0 +1,77 @@
|
||||
/*
|
||||
* Copyright 2012 Free Electrons
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/*
|
||||
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
|
||||
* need to include the CFA-10036 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10036.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10037 Board";
|
||||
compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-1 = <&hog_pins_cfa10037>;
|
||||
|
||||
hog_pins_cfa10037: hog-10037@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
usbphy1: usbphy@8007e000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
usb1: usb@80090000 {
|
||||
vbus-supply = <®_usb1_vbus>;
|
||||
pinctrl-0 = <&usbphy1_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mac0: ethernet@800f0000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
phy-reset-gpios = <&gpio2 21 0>;
|
||||
phy-reset-duration = <100>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
reg_usb1_vbus: usb1_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio0 7 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -23,69 +23,120 @@
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-1 = <&hog_pins_cfa10049>;
|
||||
pinctrl-1 = <&hog_pins_cfa10049
|
||||
&hog_pins_cfa10049_pullup>;
|
||||
|
||||
hog_pins_cfa10049: hog-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */
|
||||
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
|
||||
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
|
||||
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
|
||||
0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
spi3_pins_cfa10049: spi3-cfa10049@0 {
|
||||
hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
|
||||
0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
|
||||
0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
|
||||
0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
|
||||
0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */
|
||||
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
|
||||
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
|
||||
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
|
||||
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
spi2_pins_cfa10049: spi2-cfa10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
spi3_pins_cfa10049: spi3-cfa10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
|
||||
0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
|
||||
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
|
||||
0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
|
||||
0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
||||
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
||||
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
||||
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
||||
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
||||
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
||||
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
||||
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
||||
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
||||
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
||||
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
||||
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
||||
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
||||
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
||||
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
||||
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
||||
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
|
||||
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10049: lcdif-evk@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ssp3: ssp@80016000 {
|
||||
compatible = "fsl,imx28-spi";
|
||||
lcdif@80030000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi3_pins_cfa10049>;
|
||||
pinctrl-0 = <&lcdif_18bit_pins_cfa10049
|
||||
&lcdif_pins_cfa10049>;
|
||||
status = "okay";
|
||||
|
||||
gpio5: gpio5@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0>;
|
||||
registers-number = <2>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
|
||||
gpio6: gpio6@1 {
|
||||
compatible = "fairchild,74hc595";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <1>;
|
||||
registers-number = <4>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
|
||||
dac0: dh2228@2 {
|
||||
compatible = "rohm,dh2228fv";
|
||||
reg = <2>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-1 = <&pwm3_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@8005a000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
@ -113,6 +164,19 @@
|
||||
|
||||
i2c@3 {
|
||||
reg = <3>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pca9555: pca9555@20 {
|
||||
compatible = "nxp,pca9555";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <19 0x2>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -153,4 +217,92 @@
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
spi2 {
|
||||
compatible = "spi-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_pins_cfa10049>;
|
||||
status = "okay";
|
||||
gpio-sck = <&gpio2 16 0>;
|
||||
gpio-mosi = <&gpio2 17 0>;
|
||||
gpio-miso = <&gpio2 18 0>;
|
||||
cs-gpios = <&gpio3 23 0>;
|
||||
num-chipselects = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hx8357: hx8357@0 {
|
||||
compatible = "himax,hx8357b", "himax,hx8357";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <100000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
gpios-reset = <&gpio3 30 0>;
|
||||
im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi3 {
|
||||
compatible = "spi-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi3_pins_cfa10049>;
|
||||
status = "okay";
|
||||
gpio-sck = <&gpio0 24 0>;
|
||||
gpio-mosi = <&gpio0 28 0>;
|
||||
cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
|
||||
num-chipselects = <3>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio5: gpio5@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0>;
|
||||
registers-number = <2>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
|
||||
gpio6: gpio6@1 {
|
||||
compatible = "fairchild,74hc595";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <1>;
|
||||
registers-number = <4>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
|
||||
dac0: dh2228@2 {
|
||||
compatible = "rohm,dh2228fv";
|
||||
reg = <2>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rotary_button {
|
||||
label = "rotary_button";
|
||||
gpios = <&gpio3 26 1>;
|
||||
debounce-interval = <10>;
|
||||
linux,code = <28>;
|
||||
};
|
||||
};
|
||||
|
||||
rotary {
|
||||
compatible = "rotary-encoder";
|
||||
gpios = <&gpio3 24 1>, <&gpio3 25 1>;
|
||||
linux,axis = <1>; /* REL_Y */
|
||||
rotary-encoder,relative-axis;
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 3 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -177,6 +177,7 @@
|
||||
|
||||
lradc@80050000 {
|
||||
status = "okay";
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
};
|
||||
|
||||
duart: serial@80074000 {
|
||||
|
||||
@ -502,6 +502,16 @@
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
pwm3_pins_b: pwm3@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
pwm4_pins_a: pwm4@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
|
||||
@ -119,6 +119,23 @@ static struct fb_videomode apf28dev_video_modes[] = {
|
||||
},
|
||||
};
|
||||
|
||||
static struct fb_videomode cfa10049_video_modes[] = {
|
||||
{
|
||||
.name = "Himax HX8357-B",
|
||||
.refresh = 60,
|
||||
.xres = 320,
|
||||
.yres = 480,
|
||||
.pixclock = 108506, /* picosecond (9.216 MHz) */
|
||||
.left_margin = 2,
|
||||
.right_margin = 2,
|
||||
.upper_margin = 2,
|
||||
.lower_margin = 2,
|
||||
.hsync_len = 15,
|
||||
.vsync_len = 15,
|
||||
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT
|
||||
},
|
||||
};
|
||||
|
||||
static struct mxsfb_platform_data mxsfb_pdata __initdata;
|
||||
|
||||
/*
|
||||
@ -387,6 +404,17 @@ static void __init cfa10049_init(void)
|
||||
update_fec_mac_prop(OUI_CRYSTALFONTZ);
|
||||
}
|
||||
|
||||
static void __init cfa10037_init(void)
|
||||
{
|
||||
enable_clk_enet_out();
|
||||
update_fec_mac_prop(OUI_CRYSTALFONTZ);
|
||||
|
||||
mxsfb_pdata.mode_list = cfa10049_video_modes;
|
||||
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
|
||||
mxsfb_pdata.default_bpp = 32;
|
||||
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
|
||||
}
|
||||
|
||||
static void __init apf28_init(void)
|
||||
{
|
||||
enable_clk_enet_out();
|
||||
@ -407,6 +435,8 @@ static void __init mxs_machine_init(void)
|
||||
m28evk_init();
|
||||
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
|
||||
apx4devkit_init();
|
||||
else if (of_machine_is_compatible("crystalfontz,cfa10037"))
|
||||
cfa10037_init();
|
||||
else if (of_machine_is_compatible("crystalfontz,cfa10049"))
|
||||
cfa10049_init();
|
||||
else if (of_machine_is_compatible("armadeus,imx28-apf28"))
|
||||
|
||||
Loading…
Reference in New Issue
Block a user