[PATCH] mipsnet: Virtual ethernet driver for MIPSsim.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/Kconfig   |    8 +
 drivers/net/Makefile  |    1
 drivers/net/mipsnet.c |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mipsnet.h |  127 +++++++++++++++++
 4 files changed, 507 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Ralf Baechle 2005-10-10 14:51:27 +01:00 committed by Jeff Garzik
parent 9cc975e00d
commit dcbf847756
4 changed files with 507 additions and 0 deletions

View File

@ -475,6 +475,14 @@ config SGI_IOC3_ETH_HW_TX_CSUM
the moment only acceleration of IPv4 is supported. This option
enables offloading for checksums on transmit. If unsure, say Y.
config MIPS_SIM_NET
tristate "MIPS simulator Network device (EXPERIMENTAL)"
depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
If you are not using a MIPSsim or are unsure, say N.
config SGI_O2MACE_ETH
tristate "SGI O2 MACE Fast Ethernet support"
depends on NET_ETHERNET && SGI_IP32=y

View File

@ -167,6 +167,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_GT96100ETH) += gt96100eth.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o

371
drivers/net/mipsnet.c Normal file
View File

@ -0,0 +1,371 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#define DEBUG
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/sched.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <asm/io.h>
#include <asm/mips-boards/simint.h>
#include "mipsnet.h" /* actual device IO mapping */
#define MIPSNET_VERSION "2005-06-20"
#define mipsnet_reg_address(dev, field) (dev->base_addr + field_offset(field))
struct mipsnet_priv {
struct net_device_stats stats;
};
static struct platform_device *mips_plat_dev;
static char mipsnet_string[] = "mipsnet";
/*
* Copy data from the MIPSNET rx data port
*/
static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata,
int len)
{
uint32_t available_len = inl(mipsnet_reg_address(dev, rxDataCount));
if (available_len < len)
return -EFAULT;
for (; len > 0; len--, kdata++) {
*kdata = inb(mipsnet_reg_address(dev, rxDataBuffer));
}
return inl(mipsnet_reg_address(dev, rxDataCount));
}
static inline ssize_t mipsnet_put_todevice(struct net_device *dev,
struct sk_buff *skb)
{
int count_to_go = skb->len;
char *buf_ptr = skb->data;
struct mipsnet_priv *mp = netdev_priv(dev);
pr_debug("%s: %s(): telling MIPSNET txDataCount(%d)\n",
dev->name, __FUNCTION__, skb->len);
outl(skb->len, mipsnet_reg_address(dev, txDataCount));
pr_debug("%s: %s(): sending data to MIPSNET txDataBuffer(%d)\n",
dev->name, __FUNCTION__, skb->len);
for (; count_to_go; buf_ptr++, count_to_go--) {
outb(*buf_ptr, mipsnet_reg_address(dev, txDataBuffer));
}
mp->stats.tx_packets++;
mp->stats.tx_bytes += skb->len;
return skb->len;
}
static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev)
{
pr_debug("%s:%s(): transmitting %d bytes\n",
dev->name, __FUNCTION__, skb->len);
/* Only one packet at a time. Once TXDONE interrupt is serviced, the
* queue will be restarted.
*/
netif_stop_queue(dev);
mipsnet_put_todevice(dev, skb);
return 0;
}
static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count)
{
struct sk_buff *skb;
size_t len = count;
struct mipsnet_priv *mp = netdev_priv(dev);
if (!(skb = alloc_skb(len + 2, GFP_KERNEL))) {
mp->stats.rx_dropped++;
return -ENOMEM;
}
skb_reserve(skb, 2);
if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len))
return -EFAULT;
skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
skb->ip_summed = CHECKSUM_UNNECESSARY;
pr_debug("%s:%s(): pushing RXed data to kernel\n",
dev->name, __FUNCTION__);
netif_rx(skb);
mp->stats.rx_packets++;
mp->stats.rx_bytes += len;
return count;
}
static irqreturn_t
mipsnet_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = dev_id;
irqreturn_t retval = IRQ_NONE;
uint64_t interruptFlags;
if (irq == dev->irq) {
pr_debug("%s:%s(): irq %d for device\n",
dev->name, __FUNCTION__, irq);
retval = IRQ_HANDLED;
interruptFlags =
inl(mipsnet_reg_address(dev, interruptControl));
pr_debug("%s:%s(): intCtl=0x%016llx\n", dev->name,
__FUNCTION__, interruptFlags);
if (interruptFlags & MIPSNET_INTCTL_TXDONE) {
pr_debug("%s:%s(): got TXDone\n",
dev->name, __FUNCTION__);
outl(MIPSNET_INTCTL_TXDONE,
mipsnet_reg_address(dev, interruptControl));
// only one packet at a time, we are done.
netif_wake_queue(dev);
} else if (interruptFlags & MIPSNET_INTCTL_RXDONE) {
pr_debug("%s:%s(): got RX data\n",
dev->name, __FUNCTION__);
mipsnet_get_fromdev(dev,
inl(mipsnet_reg_address(dev, rxDataCount)));
pr_debug("%s:%s(): clearing RX int\n",
dev->name, __FUNCTION__);
outl(MIPSNET_INTCTL_RXDONE,
mipsnet_reg_address(dev, interruptControl));
} else if (interruptFlags & MIPSNET_INTCTL_TESTBIT) {
pr_debug("%s:%s(): got test interrupt\n",
dev->name, __FUNCTION__);
// TESTBIT is cleared on read.
// And takes effect after a write with 0
outl(0, mipsnet_reg_address(dev, interruptControl));
} else {
pr_debug("%s:%s(): no valid fags 0x%016llx\n",
dev->name, __FUNCTION__, interruptFlags);
// Maybe shared IRQ, just ignore, no clearing.
retval = IRQ_NONE;
}
} else {
printk(KERN_INFO "%s: %s(): irq %d for unknown device\n",
dev->name, __FUNCTION__, irq);
retval = IRQ_NONE;
}
return retval;
} //mipsnet_interrupt()
static int mipsnet_open(struct net_device *dev)
{
int err;
pr_debug("%s: mipsnet_open\n", dev->name);
err = request_irq(dev->irq, &mipsnet_interrupt,
SA_SHIRQ, dev->name, (void *) dev);
if (err) {
pr_debug("%s: %s(): can't get irq %d\n",
dev->name, __FUNCTION__, dev->irq);
release_region(dev->base_addr, MIPSNET_IO_EXTENT);
return err;
}
pr_debug("%s: %s(): got IO region at 0x%04lx and irq %d for dev.\n",
dev->name, __FUNCTION__, dev->base_addr, dev->irq);
netif_start_queue(dev);
// test interrupt handler
outl(MIPSNET_INTCTL_TESTBIT,
mipsnet_reg_address(dev, interruptControl));
return 0;
}
static int mipsnet_close(struct net_device *dev)
{
pr_debug("%s: %s()\n", dev->name, __FUNCTION__);
netif_stop_queue(dev);
return 0;
}
static struct net_device_stats *mipsnet_get_stats(struct net_device *dev)
{
struct mipsnet_priv *mp = netdev_priv(dev);
return &mp->stats;
}
static void mipsnet_set_mclist(struct net_device *dev)
{
// we don't do anything
return;
}
static int __init mipsnet_probe(struct device *dev)
{
struct net_device *netdev;
int err;
netdev = alloc_etherdev(sizeof(struct mipsnet_priv));
if (!netdev) {
err = -ENOMEM;
goto out;
}
dev_set_drvdata(dev, netdev);
netdev->open = mipsnet_open;
netdev->stop = mipsnet_close;
netdev->hard_start_xmit = mipsnet_xmit;
netdev->get_stats = mipsnet_get_stats;
netdev->set_multicast_list = mipsnet_set_mclist;
/*
* TODO: probe for these or load them from PARAM
*/
netdev->base_addr = 0x4200;
netdev->irq = MIPSCPU_INT_BASE + MIPSCPU_INT_MB0 +
inl(mipsnet_reg_address(netdev, interruptInfo));
// Get the io region now, get irq on open()
if (!request_region(netdev->base_addr, MIPSNET_IO_EXTENT, "mipsnet")) {
pr_debug("%s: %s(): IO region {start: 0x%04lux, len: %d} "
"for dev is not availble.\n", netdev->name,
__FUNCTION__, netdev->base_addr, MIPSNET_IO_EXTENT);
err = -EBUSY;
goto out_free_netdev;
}
/*
* Lacking any better mechanism to allocate a MAC address we use a
* random one ...
*/
random_ether_addr(netdev->dev_addr);
err = register_netdev(netdev);
if (err) {
printk(KERN_ERR "MIPSNet: failed to register netdev.\n");
goto out_free_region;
}
return 0;
out_free_region:
release_region(netdev->base_addr, MIPSNET_IO_EXTENT);
out_free_netdev:
free_netdev(netdev);
out:
return err;
}
static int __devexit mipsnet_device_remove(struct device *device)
{
struct net_device *dev = dev_get_drvdata(device);
unregister_netdev(dev);
release_region(dev->base_addr, MIPSNET_IO_EXTENT);
free_netdev(dev);
dev_set_drvdata(device, NULL);
return 0;
}
static struct device_driver mipsnet_driver = {
.name = mipsnet_string,
.bus = &platform_bus_type,
.probe = mipsnet_probe,
.remove = __devexit_p(mipsnet_device_remove),
};
static void mipsnet_platform_release(struct device *device)
{
struct platform_device *pldev;
/* free device */
pldev = to_platform_device(device);
kfree(pldev);
}
static int __init mipsnet_init_module(void)
{
struct platform_device *pldev;
int err;
printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. "
"(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION);
if (driver_register(&mipsnet_driver)) {
printk(KERN_ERR "Driver registration failed\n");
err = -ENODEV;
goto out;
}
if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) {
err = -ENOMEM;
goto out_unregister_driver;
}
memset (pldev, 0, sizeof (*pldev));
pldev->name = mipsnet_string;
pldev->id = 0;
pldev->dev.release = mipsnet_platform_release;
if (platform_device_register(pldev)) {
err = -ENODEV;
goto out_free_pldev;
}
if (!pldev->dev.driver) {
/*
* The driver was not bound to this device, there was
* no hardware at this address. Unregister it, as the
* release fuction will take care of freeing the
* allocated structure
*/
platform_device_unregister (pldev);
}
mips_plat_dev = pldev;
return 0;
out_free_pldev:
kfree(pldev);
out_unregister_driver:
driver_unregister(&mipsnet_driver);
out:
return err;
}
static void __exit mipsnet_exit_module(void)
{
pr_debug("MIPSNet Ethernet driver exiting\n");
driver_unregister(&mipsnet_driver);
}
module_init(mipsnet_init_module);
module_exit(mipsnet_exit_module);

127
drivers/net/mipsnet.h Normal file
View File

@ -0,0 +1,127 @@
//
// <COPYRIGHT CLASS="1B" YEAR="2005">
// Unpublished work (c) MIPS Technologies, Inc. All rights reserved.
// Unpublished rights reserved under the copyright laws of the U.S.A. and
// other countries.
//
// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC.
// FOR INTERNAL USE ONLY.
//
// Under no circumstances (contract or otherwise) may this information be
// disclosed to, or copied, modified or used by anyone other than employees
// or contractors of MIPS Technologies having a need to know.
// </COPYRIGHT>
//
//++
// File: MIPS_Net.h
//
// Description:
// The definition of the emulated MIPSNET device's interface.
//
// Notes: This include file needs to work from a Linux device drivers.
//
//--
//
#ifndef __MIPSNET_H
#define __MIPSNET_H
/*
* Id of this Net device, as seen by the core.
*/
#define MIPS_NET_DEV_ID ((uint64_t) \
((uint64_t)'M'<< 0)| \
((uint64_t)'I'<< 8)| \
((uint64_t)'P'<<16)| \
((uint64_t)'S'<<24)| \
((uint64_t)'N'<<32)| \
((uint64_t)'E'<<40)| \
((uint64_t)'T'<<48)| \
((uint64_t)'0'<<56))
/*
* Net status/control block as seen by sw in the core.
* (Why not use bit fields? can't be bothered with cross-platform struct
* packing.)
*/
typedef struct _net_control_block {
/// dev info for probing
/// reads as MIPSNET%d where %d is some form of version
uint64_t devId; /*0x00 */
/*
* read only busy flag.
* Set and cleared by the Net Device to indicate that an rx or a tx
* is in progress.
*/
uint32_t busy; /*0x08 */
/*
* Set by the Net Device.
* The device will set it once data has been received.
* The value is the number of bytes that should be read from
* rxDataBuffer. The value will decrease till 0 until all the data
* from rxDataBuffer has been read.
*/
uint32_t rxDataCount; /*0x0c */
#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
/*
* Settable from the MIPS core, cleared by the Net Device.
* The core should set the number of bytes it wants to send,
* then it should write those bytes of data to txDataBuffer.
* The device will clear txDataCount has been processed (not necessarily sent).
*/
uint32_t txDataCount; /*0x10 */
/*
* Interrupt control
*
* Used to clear the interrupted generated by this dev.
* Write a 1 to clear the interrupt. (except bit31).
*
* Bit0 is set if it was a tx-done interrupt.
* Bit1 is set when new rx-data is available.
* Until this bit is cleared there will be no other RXs.
*
* Bit31 is used for testing, it clears after a read.
* Writing 1 to this bit will cause an interrupt to be generated.
* To clear the test interrupt, write 0 to this register.
*/
uint32_t interruptControl; /*0x14 */
#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0))
#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1))
#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31))
#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT)
/*
* Readonly core-specific interrupt info for the device to signal the core.
* The meaning of the contents of this field might change.
*/
/*###\todo: the whole memIntf interrupt scheme is messy: the device should have
* no control what so ever of what VPE/register set is being used.
* The MemIntf should only expose interrupt lines, and something in the
* config should be responsible for the line<->core/vpe bindings.
*/
uint32_t interruptInfo; /*0x18 */
/*
* This is where the received data is read out.
* There is more data to read until rxDataReady is 0.
* Only 1 byte at this regs offset is used.
*/
uint32_t rxDataBuffer; /*0x1c */
/*
* This is where the data to transmit is written.
* Data should be written for the amount specified in the txDataCount register.
* Only 1 byte at this regs offset is used.
*/
uint32_t txDataBuffer; /*0x20 */
} MIPS_T_NetControl;
#define MIPSNET_IO_EXTENT 0x40 /* being generous */
#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field)
#endif /* __MIPSNET_H */