drm/panel: Add driver for the Toppoly TD043MTEA1 panel
This panel is used on the OMAP3 Pandora.
The code is based on the omapdrm-specific panel-tpo-td043mtea1 driver.
v2:
- fix checkpatch warnings
o (lcd == NULL) => (!lcd) (sam)
o alignment to open '(' (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-10-laurent.pinchart@ideasonboard.com
This commit is contained in:
Laurent Pinchart
Sam Ravnborg
parent
415b8dd087
commit
dc2e1e5b27
@ -332,6 +332,13 @@ config DRM_PANEL_TPO_TD028TTEC1
|
||||
Say Y here if you want to enable support for TPO TD028TTEC1 480x640
|
||||
2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
|
||||
|
||||
config DRM_PANEL_TPO_TD043MTEA1
|
||||
tristate "Toppoly (TPO) TD043MTEA1 panel driver"
|
||||
depends on GPIOLIB && OF && REGULATOR && SPI
|
||||
help
|
||||
Say Y here if you want to enable support for TPO TD043MTEA1 800x480
|
||||
4.3" panel (found on the OMAP3 Pandora board).
|
||||
|
||||
config DRM_PANEL_TPO_TPG110
|
||||
tristate "TPO TPG 800x400 panel"
|
||||
depends on OF && SPI && GPIOLIB
|
||||
|
||||
@ -35,5 +35,6 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
|
||||
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
|
||||
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
|
||||
obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
|
||||
obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
|
||||
obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
|
||||
obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
|
||||
|
||||
@ -328,7 +328,7 @@ static int td028ttec1_probe(struct spi_device *spi)
|
||||
int ret;
|
||||
|
||||
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
|
||||
if (lcd == NULL)
|
||||
if (!lcd)
|
||||
return -ENOMEM;
|
||||
|
||||
spi_set_drvdata(spi, lcd);
|
||||
|
||||
509
drivers/gpu/drm/panel/panel-tpo-td043mtea1.c
Normal file
509
drivers/gpu/drm/panel/panel-tpo-td043mtea1.c
Normal file
@ -0,0 +1,509 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Toppoly TD043MTEA1 Panel Driver
|
||||
*
|
||||
* Copyright (C) 2019 Texas Instruments Incorporated
|
||||
*
|
||||
* Based on the omapdrm-specific panel-tpo-td043mtea1 driver
|
||||
*
|
||||
* Author: Gražvydas Ignotas <notasas@gmail.com>
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <drm/drm_connector.h>
|
||||
#include <drm/drm_modes.h>
|
||||
#include <drm/drm_panel.h>
|
||||
|
||||
#define TPO_R02_MODE(x) ((x) & 7)
|
||||
#define TPO_R02_MODE_800x480 7
|
||||
#define TPO_R02_NCLK_RISING BIT(3)
|
||||
#define TPO_R02_HSYNC_HIGH BIT(4)
|
||||
#define TPO_R02_VSYNC_HIGH BIT(5)
|
||||
|
||||
#define TPO_R03_NSTANDBY BIT(0)
|
||||
#define TPO_R03_EN_CP_CLK BIT(1)
|
||||
#define TPO_R03_EN_VGL_PUMP BIT(2)
|
||||
#define TPO_R03_EN_PWM BIT(3)
|
||||
#define TPO_R03_DRIVING_CAP_100 BIT(4)
|
||||
#define TPO_R03_EN_PRE_CHARGE BIT(6)
|
||||
#define TPO_R03_SOFTWARE_CTL BIT(7)
|
||||
|
||||
#define TPO_R04_NFLIP_H BIT(0)
|
||||
#define TPO_R04_NFLIP_V BIT(1)
|
||||
#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
|
||||
#define TPO_R04_VGL_FREQ_1H BIT(4)
|
||||
|
||||
#define TPO_R03_VAL_NORMAL \
|
||||
(TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | TPO_R03_EN_VGL_PUMP | \
|
||||
TPO_R03_EN_PWM | TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
|
||||
TPO_R03_SOFTWARE_CTL)
|
||||
|
||||
#define TPO_R03_VAL_STANDBY \
|
||||
(TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
|
||||
TPO_R03_SOFTWARE_CTL)
|
||||
|
||||
static const u16 td043mtea1_def_gamma[12] = {
|
||||
105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
|
||||
};
|
||||
|
||||
struct td043mtea1_panel {
|
||||
struct drm_panel panel;
|
||||
|
||||
struct spi_device *spi;
|
||||
struct regulator *vcc_reg;
|
||||
struct gpio_desc *reset_gpio;
|
||||
|
||||
unsigned int mode;
|
||||
u16 gamma[12];
|
||||
bool vmirror;
|
||||
bool powered_on;
|
||||
bool spi_suspended;
|
||||
bool power_on_resume;
|
||||
};
|
||||
|
||||
#define to_td043mtea1_device(p) container_of(p, struct td043mtea1_panel, panel)
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Hardware Access
|
||||
*/
|
||||
|
||||
static int td043mtea1_write(struct td043mtea1_panel *lcd, u8 addr, u8 value)
|
||||
{
|
||||
struct spi_message msg;
|
||||
struct spi_transfer xfer;
|
||||
u16 data;
|
||||
int ret;
|
||||
|
||||
spi_message_init(&msg);
|
||||
|
||||
memset(&xfer, 0, sizeof(xfer));
|
||||
|
||||
data = ((u16)addr << 10) | (1 << 8) | value;
|
||||
xfer.tx_buf = &data;
|
||||
xfer.bits_per_word = 16;
|
||||
xfer.len = 2;
|
||||
spi_message_add_tail(&xfer, &msg);
|
||||
|
||||
ret = spi_sync(lcd->spi, &msg);
|
||||
if (ret < 0)
|
||||
dev_warn(&lcd->spi->dev, "failed to write to LCD reg (%d)\n",
|
||||
ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void td043mtea1_write_gamma(struct td043mtea1_panel *lcd)
|
||||
{
|
||||
const u16 *gamma = lcd->gamma;
|
||||
unsigned int i;
|
||||
u8 val;
|
||||
|
||||
/* gamma bits [9:8] */
|
||||
for (val = i = 0; i < 4; i++)
|
||||
val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
|
||||
td043mtea1_write(lcd, 0x11, val);
|
||||
|
||||
for (val = i = 0; i < 4; i++)
|
||||
val |= (gamma[i + 4] & 0x300) >> ((i + 1) * 2);
|
||||
td043mtea1_write(lcd, 0x12, val);
|
||||
|
||||
for (val = i = 0; i < 4; i++)
|
||||
val |= (gamma[i + 8] & 0x300) >> ((i + 1) * 2);
|
||||
td043mtea1_write(lcd, 0x13, val);
|
||||
|
||||
/* gamma bits [7:0] */
|
||||
for (val = i = 0; i < 12; i++)
|
||||
td043mtea1_write(lcd, 0x14 + i, gamma[i] & 0xff);
|
||||
}
|
||||
|
||||
static int td043mtea1_write_mirror(struct td043mtea1_panel *lcd)
|
||||
{
|
||||
u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
|
||||
TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
|
||||
if (lcd->vmirror)
|
||||
reg4 &= ~TPO_R04_NFLIP_V;
|
||||
|
||||
return td043mtea1_write(lcd, 4, reg4);
|
||||
}
|
||||
|
||||
static int td043mtea1_power_on(struct td043mtea1_panel *lcd)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (lcd->powered_on)
|
||||
return 0;
|
||||
|
||||
ret = regulator_enable(lcd->vcc_reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Wait for the panel to stabilize. */
|
||||
msleep(160);
|
||||
|
||||
gpiod_set_value(lcd->reset_gpio, 0);
|
||||
|
||||
td043mtea1_write(lcd, 2, TPO_R02_MODE(lcd->mode) | TPO_R02_NCLK_RISING);
|
||||
td043mtea1_write(lcd, 3, TPO_R03_VAL_NORMAL);
|
||||
td043mtea1_write(lcd, 0x20, 0xf0);
|
||||
td043mtea1_write(lcd, 0x21, 0xf0);
|
||||
td043mtea1_write_mirror(lcd);
|
||||
td043mtea1_write_gamma(lcd);
|
||||
|
||||
lcd->powered_on = true;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void td043mtea1_power_off(struct td043mtea1_panel *lcd)
|
||||
{
|
||||
if (!lcd->powered_on)
|
||||
return;
|
||||
|
||||
td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
|
||||
|
||||
gpiod_set_value(lcd->reset_gpio, 1);
|
||||
|
||||
/* wait for at least 2 vsyncs before cutting off power */
|
||||
msleep(50);
|
||||
|
||||
td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY);
|
||||
|
||||
regulator_disable(lcd->vcc_reg);
|
||||
|
||||
lcd->powered_on = false;
|
||||
}
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* sysfs
|
||||
*/
|
||||
|
||||
static ssize_t vmirror_show(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
|
||||
return snprintf(buf, PAGE_SIZE, "%d\n", lcd->vmirror);
|
||||
}
|
||||
|
||||
static ssize_t vmirror_store(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
int val;
|
||||
int ret;
|
||||
|
||||
ret = kstrtoint(buf, 0, &val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
lcd->vmirror = !!val;
|
||||
|
||||
ret = td043mtea1_write_mirror(lcd);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static ssize_t mode_show(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
|
||||
return snprintf(buf, PAGE_SIZE, "%d\n", lcd->mode);
|
||||
}
|
||||
|
||||
static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
long val;
|
||||
int ret;
|
||||
|
||||
ret = kstrtol(buf, 0, &val);
|
||||
if (ret != 0 || val & ~7)
|
||||
return -EINVAL;
|
||||
|
||||
lcd->mode = val;
|
||||
|
||||
val |= TPO_R02_NCLK_RISING;
|
||||
td043mtea1_write(lcd, 2, val);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static ssize_t gamma_show(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
ssize_t len = 0;
|
||||
unsigned int i;
|
||||
int ret;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(lcd->gamma); i++) {
|
||||
ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
|
||||
lcd->gamma[i]);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
len += ret;
|
||||
}
|
||||
buf[len - 1] = '\n';
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
static ssize_t gamma_store(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
unsigned int g[12];
|
||||
unsigned int i;
|
||||
int ret;
|
||||
|
||||
ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
|
||||
&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
|
||||
&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
|
||||
if (ret != 12)
|
||||
return -EINVAL;
|
||||
|
||||
for (i = 0; i < 12; i++)
|
||||
lcd->gamma[i] = g[i];
|
||||
|
||||
td043mtea1_write_gamma(lcd);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR_RW(vmirror);
|
||||
static DEVICE_ATTR_RW(mode);
|
||||
static DEVICE_ATTR_RW(gamma);
|
||||
|
||||
static struct attribute *td043mtea1_attrs[] = {
|
||||
&dev_attr_vmirror.attr,
|
||||
&dev_attr_mode.attr,
|
||||
&dev_attr_gamma.attr,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group td043mtea1_attr_group = {
|
||||
.attrs = td043mtea1_attrs,
|
||||
};
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Panel Operations
|
||||
*/
|
||||
|
||||
static int td043mtea1_unprepare(struct drm_panel *panel)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
|
||||
|
||||
if (!lcd->spi_suspended)
|
||||
td043mtea1_power_off(lcd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int td043mtea1_prepare(struct drm_panel *panel)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* If we are resuming from system suspend, SPI might not be enabled
|
||||
* yet, so we'll program the LCD from SPI PM resume callback.
|
||||
*/
|
||||
if (lcd->spi_suspended)
|
||||
return 0;
|
||||
|
||||
ret = td043mtea1_power_on(lcd);
|
||||
if (ret) {
|
||||
dev_err(&lcd->spi->dev, "%s: power on failed (%d)\n",
|
||||
__func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct drm_display_mode td043mtea1_mode = {
|
||||
.clock = 36000,
|
||||
.hdisplay = 800,
|
||||
.hsync_start = 800 + 68,
|
||||
.hsync_end = 800 + 68 + 1,
|
||||
.htotal = 800 + 68 + 1 + 214,
|
||||
.vdisplay = 480,
|
||||
.vsync_start = 480 + 39,
|
||||
.vsync_end = 480 + 39 + 1,
|
||||
.vtotal = 480 + 39 + 1 + 34,
|
||||
.vrefresh = 60,
|
||||
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
|
||||
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
||||
.width_mm = 94,
|
||||
.height_mm = 56,
|
||||
};
|
||||
|
||||
static int td043mtea1_get_modes(struct drm_panel *panel)
|
||||
{
|
||||
struct drm_connector *connector = panel->connector;
|
||||
struct drm_display_mode *mode;
|
||||
|
||||
mode = drm_mode_duplicate(panel->drm, &td043mtea1_mode);
|
||||
if (!mode)
|
||||
return -ENOMEM;
|
||||
|
||||
drm_mode_set_name(mode);
|
||||
drm_mode_probed_add(connector, mode);
|
||||
|
||||
connector->display_info.width_mm = td043mtea1_mode.width_mm;
|
||||
connector->display_info.height_mm = td043mtea1_mode.height_mm;
|
||||
/*
|
||||
* FIXME: According to the datasheet sync signals are sampled on the
|
||||
* rising edge of the clock, but the code running on the OMAP3 Pandora
|
||||
* indicates sampling on the falling edge. This should be tested on a
|
||||
* real device.
|
||||
*/
|
||||
connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
|
||||
| DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
|
||||
| DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static const struct drm_panel_funcs td043mtea1_funcs = {
|
||||
.unprepare = td043mtea1_unprepare,
|
||||
.prepare = td043mtea1_prepare,
|
||||
.get_modes = td043mtea1_get_modes,
|
||||
};
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Power Management, Probe and Remove
|
||||
*/
|
||||
|
||||
static int __maybe_unused td043mtea1_suspend(struct device *dev)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
|
||||
if (lcd->powered_on) {
|
||||
td043mtea1_power_off(lcd);
|
||||
lcd->powered_on = true;
|
||||
}
|
||||
|
||||
lcd->spi_suspended = true;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused td043mtea1_resume(struct device *dev)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
lcd->spi_suspended = false;
|
||||
|
||||
if (lcd->powered_on) {
|
||||
lcd->powered_on = false;
|
||||
ret = td043mtea1_power_on(lcd);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(td043mtea1_pm_ops, td043mtea1_suspend,
|
||||
td043mtea1_resume);
|
||||
|
||||
static int td043mtea1_probe(struct spi_device *spi)
|
||||
{
|
||||
struct td043mtea1_panel *lcd;
|
||||
int ret;
|
||||
|
||||
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
|
||||
if (lcd == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
spi_set_drvdata(spi, lcd);
|
||||
lcd->spi = spi;
|
||||
lcd->mode = TPO_R02_MODE_800x480;
|
||||
memcpy(lcd->gamma, td043mtea1_def_gamma, sizeof(lcd->gamma));
|
||||
|
||||
lcd->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
|
||||
if (IS_ERR(lcd->vcc_reg)) {
|
||||
dev_err(&spi->dev, "failed to get VCC regulator\n");
|
||||
return PTR_ERR(lcd->vcc_reg);
|
||||
}
|
||||
|
||||
lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(lcd->reset_gpio)) {
|
||||
dev_err(&spi->dev, "failed to get reset GPIO\n");
|
||||
return PTR_ERR(lcd->reset_gpio);
|
||||
}
|
||||
|
||||
spi->bits_per_word = 16;
|
||||
spi->mode = SPI_MODE_0;
|
||||
|
||||
ret = spi_setup(spi);
|
||||
if (ret < 0) {
|
||||
dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = sysfs_create_group(&spi->dev.kobj, &td043mtea1_attr_group);
|
||||
if (ret < 0) {
|
||||
dev_err(&spi->dev, "failed to create sysfs files\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
drm_panel_init(&lcd->panel);
|
||||
lcd->panel.dev = &lcd->spi->dev;
|
||||
lcd->panel.funcs = &td043mtea1_funcs;
|
||||
|
||||
ret = drm_panel_add(&lcd->panel);
|
||||
if (ret < 0) {
|
||||
sysfs_remove_group(&spi->dev.kobj, &td043mtea1_attr_group);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int td043mtea1_remove(struct spi_device *spi)
|
||||
{
|
||||
struct td043mtea1_panel *lcd = spi_get_drvdata(spi);
|
||||
|
||||
drm_panel_remove(&lcd->panel);
|
||||
drm_panel_disable(&lcd->panel);
|
||||
drm_panel_unprepare(&lcd->panel);
|
||||
|
||||
sysfs_remove_group(&spi->dev.kobj, &td043mtea1_attr_group);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id td043mtea1_of_match[] = {
|
||||
{ .compatible = "tpo,td043mtea1", },
|
||||
{ /* sentinel */ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, td043mtea1_of_match);
|
||||
|
||||
static struct spi_driver td043mtea1_driver = {
|
||||
.probe = td043mtea1_probe,
|
||||
.remove = td043mtea1_remove,
|
||||
.driver = {
|
||||
.name = "panel-tpo-td043mtea1",
|
||||
.pm = &td043mtea1_pm_ops,
|
||||
.of_match_table = td043mtea1_of_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_spi_driver(td043mtea1_driver);
|
||||
|
||||
MODULE_ALIAS("spi:tpo,td043mtea1");
|
||||
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
|
||||
MODULE_DESCRIPTION("TPO TD043MTEA1 Panel Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user