leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

USB: Spelling fixes

Browse Source 
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Joe Perches 2007-12-17 11:40:18 -08:00 committed by Greg Kroah-Hartman
parent d4a8d46d91
commit dc0d5c1e5c
12 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/usb/atm/ueagle-atm.c
View File

@ -999,7 +999,7 @@ static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
bi.dwAddress = swab32(blockidx->PageAddress);
uea_dbg(INS_TO_USBDEV(sc),
"sending block %u for DSP page %u size %u adress %x\n",
"sending block %u for DSP page %u size %u address %x\n",
blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress));
/* send block info through the IDMA pipe */

2
drivers/usb/class/cdc-acm.c
View File

@ -915,7 +915,7 @@ next_desc:
}
if (data_interface_num != call_interface_num)
dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
skip_normal_probe:

2
drivers/usb/gadget/at91_udc.h
View File

@ -53,7 +53,7 @@
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */
#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */

2
drivers/usb/gadget/fsl_usb2_udc.c
View File

@ -1896,7 +1896,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
spin_lock_irqsave(&udc->lock, flags);
/* ------basic driver infomation ---- */
/* ------basic driver information ---- */
t = scnprintf(next, size,
DRIVER_DESC "\n"
"%s version: %s\n"

2
drivers/usb/gadget/omap_udc.c
View File

@ -1028,7 +1028,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/* STATUS for zero length DATA stages is
* always an IN ... even for IN transfers,
* a wierd case which seem to stall OMAP.
* a weird case which seem to stall OMAP.
*/
UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR);
UDC_CTRL_REG = UDC_CLR_EP;

2
drivers/usb/host/ehci-fsl.c
View File

@ -25,7 +25,7 @@
#include "ehci-fsl.h"
/* FIXME: Power Managment is un-ported so temporarily disable it */
/* FIXME: Power Management is un-ported so temporarily disable it */
#undef CONFIG_PM
/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */

2
drivers/usb/host/ehci-sched.c
View File

@ -211,7 +211,7 @@ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
* low/fullspeed transfer can "carry over" from one uframe to the next,
* since the TT just performs downstream transfers in sequence.
*
* For example two seperate 100 usec transfers can start in the same uframe,
* For example two separate 100 usec transfers can start in the same uframe,
* and the second one would "carry over" 75 usecs into the next uframe.
*/
static void

2
drivers/usb/host/r8a66597.h
View File

@ -405,7 +405,7 @@
struct r8a66597_pipe_info {
u16 pipenum;
u16 address; /* R8A66597 HCD usb addres */
u16 address; /* R8A66597 HCD usb address */
u16 epnum;
u16 maxpacket;
u16 type;

2
drivers/usb/misc/sisusbvga/sisusb.c
View File

@ -323,7 +323,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data,
usb_kill_urb(urb);
retval = -ETIMEDOUT;
} else {
/* URB completed within timout */
/* URB completed within timeout */
retval = urb->status;
readbytes = urb->actual_length;
}

2
drivers/usb/misc/usbtest.c
View File

@ -1312,7 +1312,7 @@ static int ctrl_out (struct usbtest_dev *dev,
len += vary;
/* [real world] the "zero bytes IN" case isn't really used.
* hardware can easily trip up in this wierd case, since its
* hardware can easily trip up in this weird case, since its
* status stage is IN, not OUT like other ep0in transfers.
*/
if (len > length)

8
drivers/usb/serial/io_edgeport.c
View File

@ -959,7 +959,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
*
* This function will block the close until one of the following:
* 1. Response to our Chase comes from Edgeport
* 2. A timout of 10 seconds without activity has expired
* 2. A timeout of 10 seconds without activity has expired
* (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
*
************************************************************************/
@ -999,7 +999,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
return;
}
} else {
// Reset timout value back to 10 seconds
// Reset timeout value back to 10 seconds
dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits);
loop = 10;
}
@ -1014,7 +1014,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
* This function will block the close until one of the following:
* 1. TX count are 0
* 2. The edgeport has stopped
* 3. A timout of 3 seconds without activity has expired
* 3. A timeout of 3 seconds without activity has expired
*
************************************************************************/
static void block_until_tx_empty (struct edgeport_port *edge_port)
@ -1050,7 +1050,7 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
return;
}
} else {
// Reset timout value back to seconds
// Reset timeout value back to seconds
loop = 30;
}
}

8
drivers/usb/serial/mos7840.c
View File

@ -1133,7 +1133,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
* This function will block the close until one of the following:
* 1. TX count are 0
* 2. The mos7840 has stopped
* 3. A timout of 3 seconds without activity has expired
* 3. A timeout of 3 seconds without activity has expired
*
************************************************************************/
static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
@ -1161,7 +1161,7 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
dbg("%s - TIMEOUT", __FUNCTION__);
return;
} else {
/* Reset timout value back to seconds */
/* Reset timeout value back to seconds */
wait = 30;
}
}
@ -1275,7 +1275,7 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
*
* This function will block the close until one of the following:
* 1. Response to our Chase comes from mos7840
* 2. A timout of 10 seconds without activity has expired
* 2. A timeout of 10 seconds without activity has expired
* (1K of mos7840 data @ 2400 baud ==> 4 sec to empty)
*
************************************************************************/
@ -1304,7 +1304,7 @@ static void mos7840_block_until_chase_response(struct moschip_port
dbg("%s - TIMEOUT", __FUNCTION__);
return;
} else {
/* Reset timout value back to seconds */
/* Reset timeout value back to seconds */
wait = 10;
}
}