clocksource: sh_mtu2: Add memory base to sh_mtu2_channel structure

The channel memory base is channel-specific, add it to the channel
structure in preparation for support of multiple channels per device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
This commit is contained in:
Laurent Pinchart 2014-03-04 14:04:24 +01:00
parent aa83804af7
commit da90a1c677

View File

@ -38,7 +38,10 @@ struct sh_mtu2_device;
struct sh_mtu2_channel {
struct sh_mtu2_device *mtu;
void __iomem *base;
int irq;
struct clock_event_device ced;
};
@ -74,39 +77,35 @@ static unsigned long mtu2_reg_offs[] = {
static inline unsigned long sh_mtu2_read(struct sh_mtu2_channel *ch, int reg_nr)
{
struct sh_timer_config *cfg = ch->mtu->pdev->dev.platform_data;
void __iomem *base = ch->mtu->mapbase;
unsigned long offs;
if (reg_nr == TSTR)
return ioread8(base + cfg->channel_offset);
return ioread8(ch->mtu->mapbase);
offs = mtu2_reg_offs[reg_nr];
if ((reg_nr == TCNT) || (reg_nr == TGR))
return ioread16(base + offs);
return ioread16(ch->base + offs);
else
return ioread8(base + offs);
return ioread8(ch->base + offs);
}
static inline void sh_mtu2_write(struct sh_mtu2_channel *ch, int reg_nr,
unsigned long value)
{
struct sh_timer_config *cfg = ch->mtu->pdev->dev.platform_data;
void __iomem *base = ch->mtu->mapbase;
unsigned long offs;
if (reg_nr == TSTR) {
iowrite8(value, base + cfg->channel_offset);
iowrite8(value, ch->mtu->mapbase);
return;
}
offs = mtu2_reg_offs[reg_nr];
if ((reg_nr == TCNT) || (reg_nr == TGR))
iowrite16(value, base + offs);
iowrite16(value, ch->base + offs);
else
iowrite8(value, base + offs);
iowrite8(value, ch->base + offs);
}
static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start)
@ -315,13 +314,18 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
goto err0;
}
/* map memory, let mapbase point to our channel */
mtu->mapbase = ioremap_nocache(res->start, resource_size(res));
if (mtu->mapbase == NULL) {
/*
* Map memory, let channel.base point to our channel and mapbase to the
* start/stop shared register.
*/
mtu->channel.base = ioremap_nocache(res->start, resource_size(res));
if (mtu->channel.base == NULL) {
dev_err(&mtu->pdev->dev, "failed to remap I/O memory\n");
goto err0;
}
mtu->mapbase = mtu->channel.base + cfg->channel_offset;
/* get hold of clock */
mtu->clk = clk_get(&mtu->pdev->dev, "mtu2_fck");
if (IS_ERR(mtu->clk)) {
@ -344,7 +348,7 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
err2:
clk_put(mtu->clk);
err1:
iounmap(mtu->mapbase);
iounmap(mtu->channel.base);
err0:
return ret;
}