forked from Minki/linux
i2c: New driver for the SuperH Mobile I2C bus controller
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master only driver for the I2C block included in processors such as sh7343, sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
parent
dec1a998bd
commit
da672773d8
@ -695,4 +695,14 @@ config I2C_SH7760
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-sh7760.
|
||||
|
||||
config I2C_SH_MOBILE
|
||||
tristate "SuperH Mobile I2C Controller"
|
||||
depends on SUPERH
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
built-in I2C interface on the Renesas SH-Mobile processor.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-sh_mobile.
|
||||
|
||||
endmenu
|
||||
|
@ -39,6 +39,7 @@ obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
|
||||
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
|
||||
obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o
|
||||
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
|
||||
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
|
||||
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
|
||||
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
|
||||
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
|
||||
|
500
drivers/i2c/busses/i2c-sh_mobile.c
Normal file
500
drivers/i2c/busses/i2c-sh_mobile.c
Normal file
@ -0,0 +1,500 @@
|
||||
/*
|
||||
* SuperH Mobile I2C Controller
|
||||
*
|
||||
* Copyright (C) 2008 Magnus Damm
|
||||
*
|
||||
* Portions of the code based on out-of-tree driver i2c-sh7343.c
|
||||
* Copyright (c) 2006 Carlos Munoz <carlos@kenati.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
enum sh_mobile_i2c_op {
|
||||
OP_START = 0,
|
||||
OP_TX_ONLY,
|
||||
OP_TX_STOP,
|
||||
OP_TX_TO_RX,
|
||||
OP_RX_ONLY,
|
||||
OP_RX_STOP,
|
||||
};
|
||||
|
||||
struct sh_mobile_i2c_data {
|
||||
struct device *dev;
|
||||
void __iomem *reg;
|
||||
struct i2c_adapter adap;
|
||||
|
||||
struct clk *clk;
|
||||
u_int8_t iccl;
|
||||
u_int8_t icch;
|
||||
|
||||
spinlock_t lock;
|
||||
wait_queue_head_t wait;
|
||||
struct i2c_msg *msg;
|
||||
int pos;
|
||||
int sr;
|
||||
};
|
||||
|
||||
#define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */
|
||||
|
||||
/* Register offsets */
|
||||
#define ICDR(pd) (pd->reg + 0x00)
|
||||
#define ICCR(pd) (pd->reg + 0x04)
|
||||
#define ICSR(pd) (pd->reg + 0x08)
|
||||
#define ICIC(pd) (pd->reg + 0x0c)
|
||||
#define ICCL(pd) (pd->reg + 0x10)
|
||||
#define ICCH(pd) (pd->reg + 0x14)
|
||||
|
||||
/* Register bits */
|
||||
#define ICCR_ICE 0x80
|
||||
#define ICCR_RACK 0x40
|
||||
#define ICCR_TRS 0x10
|
||||
#define ICCR_BBSY 0x04
|
||||
#define ICCR_SCP 0x01
|
||||
|
||||
#define ICSR_SCLM 0x80
|
||||
#define ICSR_SDAM 0x40
|
||||
#define SW_DONE 0x20
|
||||
#define ICSR_BUSY 0x10
|
||||
#define ICSR_AL 0x08
|
||||
#define ICSR_TACK 0x04
|
||||
#define ICSR_WAIT 0x02
|
||||
#define ICSR_DTE 0x01
|
||||
|
||||
#define ICIC_ALE 0x08
|
||||
#define ICIC_TACKE 0x04
|
||||
#define ICIC_WAITE 0x02
|
||||
#define ICIC_DTEE 0x01
|
||||
|
||||
static void activate_ch(struct sh_mobile_i2c_data *pd)
|
||||
{
|
||||
/* Make sure the clock is enabled */
|
||||
clk_enable(pd->clk);
|
||||
|
||||
/* Enable channel and configure rx ack */
|
||||
iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
|
||||
|
||||
/* Mask all interrupts */
|
||||
iowrite8(0, ICIC(pd));
|
||||
|
||||
/* Set the clock */
|
||||
iowrite8(pd->iccl, ICCL(pd));
|
||||
iowrite8(pd->icch, ICCH(pd));
|
||||
}
|
||||
|
||||
static void deactivate_ch(struct sh_mobile_i2c_data *pd)
|
||||
{
|
||||
/* Clear/disable interrupts */
|
||||
iowrite8(0, ICSR(pd));
|
||||
iowrite8(0, ICIC(pd));
|
||||
|
||||
/* Disable channel */
|
||||
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
|
||||
|
||||
/* Disable clock */
|
||||
clk_disable(pd->clk);
|
||||
}
|
||||
|
||||
static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
|
||||
enum sh_mobile_i2c_op op, unsigned char data)
|
||||
{
|
||||
unsigned char ret = 0;
|
||||
unsigned long flags;
|
||||
|
||||
dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data);
|
||||
|
||||
spin_lock_irqsave(&pd->lock, flags);
|
||||
|
||||
switch (op) {
|
||||
case OP_START:
|
||||
iowrite8(0x94, ICCR(pd));
|
||||
break;
|
||||
case OP_TX_ONLY:
|
||||
iowrite8(data, ICDR(pd));
|
||||
break;
|
||||
case OP_TX_STOP:
|
||||
iowrite8(data, ICDR(pd));
|
||||
iowrite8(0x90, ICCR(pd));
|
||||
iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
|
||||
break;
|
||||
case OP_TX_TO_RX:
|
||||
iowrite8(data, ICDR(pd));
|
||||
iowrite8(0x81, ICCR(pd));
|
||||
break;
|
||||
case OP_RX_ONLY:
|
||||
ret = ioread8(ICDR(pd));
|
||||
break;
|
||||
case OP_RX_STOP:
|
||||
ret = ioread8(ICDR(pd));
|
||||
iowrite8(0xc0, ICCR(pd));
|
||||
break;
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&pd->lock, flags);
|
||||
|
||||
dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct platform_device *dev = dev_id;
|
||||
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
||||
struct i2c_msg *msg = pd->msg;
|
||||
unsigned char data, sr;
|
||||
int wakeup = 0;
|
||||
|
||||
sr = ioread8(ICSR(pd));
|
||||
pd->sr |= sr;
|
||||
|
||||
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
|
||||
(msg->flags & I2C_M_RD) ? "read" : "write",
|
||||
pd->pos, msg->len);
|
||||
|
||||
if (sr & (ICSR_AL | ICSR_TACK)) {
|
||||
iowrite8(0, ICIC(pd)); /* disable interrupts */
|
||||
wakeup = 1;
|
||||
goto do_wakeup;
|
||||
}
|
||||
|
||||
if (pd->pos == msg->len) {
|
||||
i2c_op(pd, OP_RX_ONLY, 0);
|
||||
wakeup = 1;
|
||||
goto do_wakeup;
|
||||
}
|
||||
|
||||
if (pd->pos == -1) {
|
||||
data = (msg->addr & 0x7f) << 1;
|
||||
data |= (msg->flags & I2C_M_RD) ? 1 : 0;
|
||||
} else
|
||||
data = msg->buf[pd->pos];
|
||||
|
||||
if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
|
||||
if (msg->flags & I2C_M_RD)
|
||||
i2c_op(pd, OP_TX_TO_RX, data);
|
||||
else if (pd->pos == (msg->len - 1)) {
|
||||
i2c_op(pd, OP_TX_STOP, data);
|
||||
wakeup = 1;
|
||||
} else
|
||||
i2c_op(pd, OP_TX_ONLY, data);
|
||||
} else {
|
||||
if (pd->pos == (msg->len - 1))
|
||||
data = i2c_op(pd, OP_RX_STOP, 0);
|
||||
else
|
||||
data = i2c_op(pd, OP_RX_ONLY, 0);
|
||||
|
||||
msg->buf[pd->pos] = data;
|
||||
}
|
||||
pd->pos++;
|
||||
|
||||
do_wakeup:
|
||||
if (wakeup) {
|
||||
pd->sr |= SW_DONE;
|
||||
wake_up(&pd->wait);
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
|
||||
{
|
||||
/* Initialize channel registers */
|
||||
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
|
||||
|
||||
/* Enable channel and configure rx ack */
|
||||
iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
|
||||
|
||||
/* Set the clock */
|
||||
iowrite8(pd->iccl, ICCL(pd));
|
||||
iowrite8(pd->icch, ICCH(pd));
|
||||
|
||||
pd->msg = usr_msg;
|
||||
pd->pos = -1;
|
||||
pd->sr = 0;
|
||||
|
||||
/* Enable all interrupts except wait */
|
||||
iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
|
||||
ICIC(pd));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
|
||||
struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter);
|
||||
struct i2c_msg *msg;
|
||||
int err = 0;
|
||||
u_int8_t val;
|
||||
int i, k, retry_count;
|
||||
|
||||
activate_ch(pd);
|
||||
|
||||
/* Process all messages */
|
||||
for (i = 0; i < num; i++) {
|
||||
msg = &msgs[i];
|
||||
|
||||
err = start_ch(pd, msg);
|
||||
if (err)
|
||||
break;
|
||||
|
||||
i2c_op(pd, OP_START, 0);
|
||||
|
||||
/* The interrupt handler takes care of the rest... */
|
||||
k = wait_event_timeout(pd->wait,
|
||||
pd->sr & (ICSR_TACK | SW_DONE),
|
||||
5 * HZ);
|
||||
if (!k)
|
||||
dev_err(pd->dev, "Transfer request timed out\n");
|
||||
|
||||
retry_count = 10;
|
||||
again:
|
||||
val = ioread8(ICSR(pd));
|
||||
|
||||
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
|
||||
|
||||
if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
|
||||
err = -EIO;
|
||||
break;
|
||||
}
|
||||
|
||||
/* the interrupt handler may wake us up before the
|
||||
* transfer is finished, so poll the hardware
|
||||
* until we're done.
|
||||
*/
|
||||
|
||||
if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
|
||||
(val & ICSR_SDAM))) {
|
||||
msleep(1);
|
||||
if (retry_count--)
|
||||
goto again;
|
||||
|
||||
err = -EIO;
|
||||
dev_err(pd->dev, "Polling timed out\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
deactivate_ch(pd);
|
||||
|
||||
if (!err)
|
||||
err = num;
|
||||
return err;
|
||||
}
|
||||
|
||||
static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
||||
}
|
||||
|
||||
static struct i2c_algorithm sh_mobile_i2c_algorithm = {
|
||||
.functionality = sh_mobile_i2c_func,
|
||||
.master_xfer = sh_mobile_i2c_xfer,
|
||||
};
|
||||
|
||||
static void sh_mobile_i2c_setup_channel(struct platform_device *dev)
|
||||
{
|
||||
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
||||
unsigned long peripheral_clk = clk_get_rate(pd->clk);
|
||||
u_int32_t num;
|
||||
u_int32_t denom;
|
||||
u_int32_t tmp;
|
||||
|
||||
spin_lock_init(&pd->lock);
|
||||
init_waitqueue_head(&pd->wait);
|
||||
|
||||
/* Calculate the value for iccl. From the data sheet:
|
||||
* iccl = (p clock / transfer rate) * (L / (L + H))
|
||||
* where L and H are the SCL low/high ratio (5/4 in this case).
|
||||
* We also round off the result.
|
||||
*/
|
||||
num = peripheral_clk * 5;
|
||||
denom = NORMAL_SPEED * 9;
|
||||
tmp = num * 10 / denom;
|
||||
if (tmp % 10 >= 5)
|
||||
pd->iccl = (u_int8_t)((num/denom) + 1);
|
||||
else
|
||||
pd->iccl = (u_int8_t)(num/denom);
|
||||
|
||||
/* Calculate the value for icch. From the data sheet:
|
||||
icch = (p clock / transfer rate) * (H / (L + H)) */
|
||||
num = peripheral_clk * 4;
|
||||
tmp = num * 10 / denom;
|
||||
if (tmp % 10 >= 5)
|
||||
pd->icch = (u_int8_t)((num/denom) + 1);
|
||||
else
|
||||
pd->icch = (u_int8_t)(num/denom);
|
||||
}
|
||||
|
||||
static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
|
||||
{
|
||||
struct resource *res;
|
||||
int ret = -ENXIO;
|
||||
int q, m;
|
||||
int k = 0;
|
||||
int n = 0;
|
||||
|
||||
while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
|
||||
for (n = res->start; hook && n <= res->end; n++) {
|
||||
if (request_irq(n, sh_mobile_i2c_isr, IRQF_DISABLED,
|
||||
dev->dev.bus_id, dev))
|
||||
goto rollback;
|
||||
}
|
||||
k++;
|
||||
}
|
||||
|
||||
if (hook)
|
||||
return k > 0 ? 0 : -ENOENT;
|
||||
|
||||
k--;
|
||||
ret = 0;
|
||||
|
||||
rollback:
|
||||
for (q = k; k >= 0; k--) {
|
||||
for (m = n; m >= res->start; m--)
|
||||
free_irq(m, dev);
|
||||
|
||||
res = platform_get_resource(dev, IORESOURCE_IRQ, k - 1);
|
||||
m = res->end;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int sh_mobile_i2c_probe(struct platform_device *dev)
|
||||
{
|
||||
struct sh_mobile_i2c_data *pd;
|
||||
struct i2c_adapter *adap;
|
||||
struct resource *res;
|
||||
int size;
|
||||
int ret;
|
||||
|
||||
pd = kzalloc(sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
|
||||
if (pd == NULL) {
|
||||
dev_err(&dev->dev, "cannot allocate private data\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
pd->clk = clk_get(&dev->dev, "peripheral_clk");
|
||||
if (IS_ERR(pd->clk)) {
|
||||
dev_err(&dev->dev, "cannot get peripheral clock\n");
|
||||
ret = PTR_ERR(pd->clk);
|
||||
goto err;
|
||||
}
|
||||
|
||||
ret = sh_mobile_i2c_hook_irqs(dev, 1);
|
||||
if (ret) {
|
||||
dev_err(&dev->dev, "cannot request IRQ\n");
|
||||
goto err_clk;
|
||||
}
|
||||
|
||||
pd->dev = &dev->dev;
|
||||
platform_set_drvdata(dev, pd);
|
||||
|
||||
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
||||
if (res == NULL) {
|
||||
dev_err(&dev->dev, "cannot find IO resource\n");
|
||||
ret = -ENOENT;
|
||||
goto err_irq;
|
||||
}
|
||||
|
||||
size = (res->end - res->start) + 1;
|
||||
|
||||
pd->reg = ioremap(res->start, size);
|
||||
if (pd->reg == NULL) {
|
||||
dev_err(&dev->dev, "cannot map IO\n");
|
||||
ret = -ENXIO;
|
||||
goto err_irq;
|
||||
}
|
||||
|
||||
/* setup the private data */
|
||||
adap = &pd->adap;
|
||||
i2c_set_adapdata(adap, pd);
|
||||
|
||||
adap->owner = THIS_MODULE;
|
||||
adap->algo = &sh_mobile_i2c_algorithm;
|
||||
adap->dev.parent = &dev->dev;
|
||||
adap->retries = 5;
|
||||
adap->nr = dev->id;
|
||||
|
||||
strlcpy(adap->name, dev->name, sizeof(adap->name));
|
||||
|
||||
sh_mobile_i2c_setup_channel(dev);
|
||||
|
||||
ret = i2c_add_numbered_adapter(adap);
|
||||
if (ret < 0) {
|
||||
dev_err(&dev->dev, "cannot add numbered adapter\n");
|
||||
goto err_all;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_all:
|
||||
iounmap(pd->reg);
|
||||
err_irq:
|
||||
sh_mobile_i2c_hook_irqs(dev, 0);
|
||||
err_clk:
|
||||
clk_put(pd->clk);
|
||||
err:
|
||||
kfree(pd);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int sh_mobile_i2c_remove(struct platform_device *dev)
|
||||
{
|
||||
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
||||
|
||||
i2c_del_adapter(&pd->adap);
|
||||
iounmap(pd->reg);
|
||||
sh_mobile_i2c_hook_irqs(dev, 0);
|
||||
clk_put(pd->clk);
|
||||
kfree(pd);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver sh_mobile_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "i2c-sh_mobile",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = sh_mobile_i2c_probe,
|
||||
.remove = sh_mobile_i2c_remove,
|
||||
};
|
||||
|
||||
static int __init sh_mobile_i2c_adap_init(void)
|
||||
{
|
||||
return platform_driver_register(&sh_mobile_i2c_driver);
|
||||
}
|
||||
|
||||
static void __exit sh_mobile_i2c_adap_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&sh_mobile_i2c_driver);
|
||||
}
|
||||
|
||||
module_init(sh_mobile_i2c_adap_init);
|
||||
module_exit(sh_mobile_i2c_adap_exit);
|
||||
|
||||
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
|
||||
MODULE_AUTHOR("Magnus Damm");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue
Block a user