forked from Minki/linux
Merge remote-tracking branch 'asoc/topic/tas5086' into asoc-next
This commit is contained in:
Mark Brown
commit
da51f83fa2
@ -20,6 +20,17 @@ Optional properties:
|
|||||||
When not specified, the hardware default of 1300ms
|
When not specified, the hardware default of 1300ms
|
||||||
is retained.
|
is retained.
|
||||||
|
|
||||||
|
- ti,mid-z-channel-X: Boolean properties, X being a number from 1 to 6.
|
||||||
|
If given, channel X will start with the Mid-Z start
|
||||||
|
sequence, otherwise the default Low-Z scheme is used.
|
||||||
|
|
||||||
|
The correct configuration depends on how the power
|
||||||
|
stages connected to the PWM output pins work. Not all
|
||||||
|
power stages are compatible to Mid-Z - please refer
|
||||||
|
to the datasheets for more details.
|
||||||
|
|
||||||
|
Most systems should not set any of these properties.
|
||||||
|
|
||||||
Examples:
|
Examples:
|
||||||
|
|
||||||
i2c_bus {
|
i2c_bus {
|
||||||
|
|||||||
@ -83,6 +83,14 @@
|
|||||||
#define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */
|
#define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */
|
||||||
#define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */
|
#define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */
|
||||||
#define TAS5086_BKNDERR 0x1c
|
#define TAS5086_BKNDERR 0x1c
|
||||||
|
#define TAS5086_INPUT_MUX 0x20
|
||||||
|
#define TAS5086_PWM_OUTPUT_MUX 0x25
|
||||||
|
|
||||||
|
#define TAS5086_MAX_REGISTER TAS5086_PWM_OUTPUT_MUX
|
||||||
|
|
||||||
|
#define TAS5086_PWM_START_MIDZ_FOR_START_1 (1 << 7)
|
||||||
|
#define TAS5086_PWM_START_MIDZ_FOR_START_2 (1 << 6)
|
||||||
|
#define TAS5086_PWM_START_CHANNEL_MASK (0x3f)
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Default TAS5086 power-up configuration
|
* Default TAS5086 power-up configuration
|
||||||
@ -119,9 +127,30 @@ static const struct reg_default tas5086_reg_defaults[] = {
|
|||||||
{ 0x1c, 0x05 },
|
{ 0x1c, 0x05 },
|
||||||
};
|
};
|
||||||
|
|
||||||
|
static int tas5086_register_size(struct device *dev, unsigned int reg)
|
||||||
|
{
|
||||||
|
switch (reg) {
|
||||||
|
case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
|
||||||
|
return 1;
|
||||||
|
case TAS5086_INPUT_MUX:
|
||||||
|
case TAS5086_PWM_OUTPUT_MUX:
|
||||||
|
return 4;
|
||||||
|
}
|
||||||
|
|
||||||
|
dev_err(dev, "Unsupported register address: %d\n", reg);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
|
static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
|
||||||
{
|
{
|
||||||
return !((reg == 0x0f) || (reg >= 0x11 && reg <= 0x17));
|
switch (reg) {
|
||||||
|
case 0x0f:
|
||||||
|
case 0x11 ... 0x17:
|
||||||
|
case 0x1d ... 0x1f:
|
||||||
|
return false;
|
||||||
|
default:
|
||||||
|
return true;
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
|
static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
|
||||||
@ -140,6 +169,76 @@ static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
|
|||||||
return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
|
return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static int tas5086_reg_write(void *context, unsigned int reg,
|
||||||
|
unsigned int value)
|
||||||
|
{
|
||||||
|
struct i2c_client *client = context;
|
||||||
|
unsigned int i, size;
|
||||||
|
uint8_t buf[5];
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
size = tas5086_register_size(&client->dev, reg);
|
||||||
|
if (size == 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
buf[0] = reg;
|
||||||
|
|
||||||
|
for (i = size; i >= 1; --i) {
|
||||||
|
buf[i] = value;
|
||||||
|
value >>= 8;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = i2c_master_send(client, buf, size + 1);
|
||||||
|
if (ret == size + 1)
|
||||||
|
return 0;
|
||||||
|
else if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
else
|
||||||
|
return -EIO;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int tas5086_reg_read(void *context, unsigned int reg,
|
||||||
|
unsigned int *value)
|
||||||
|
{
|
||||||
|
struct i2c_client *client = context;
|
||||||
|
uint8_t send_buf, recv_buf[4];
|
||||||
|
struct i2c_msg msgs[2];
|
||||||
|
unsigned int size;
|
||||||
|
unsigned int i;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
size = tas5086_register_size(&client->dev, reg);
|
||||||
|
if (size == 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
send_buf = reg;
|
||||||
|
|
||||||
|
msgs[0].addr = client->addr;
|
||||||
|
msgs[0].len = sizeof(send_buf);
|
||||||
|
msgs[0].buf = &send_buf;
|
||||||
|
msgs[0].flags = 0;
|
||||||
|
|
||||||
|
msgs[1].addr = client->addr;
|
||||||
|
msgs[1].len = size;
|
||||||
|
msgs[1].buf = recv_buf;
|
||||||
|
msgs[1].flags = I2C_M_RD;
|
||||||
|
|
||||||
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
else if (ret != ARRAY_SIZE(msgs))
|
||||||
|
return -EIO;
|
||||||
|
|
||||||
|
*value = 0;
|
||||||
|
|
||||||
|
for (i = 0; i < size; i++) {
|
||||||
|
*value <<= 8;
|
||||||
|
*value |= recv_buf[i];
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
struct tas5086_private {
|
struct tas5086_private {
|
||||||
struct regmap *regmap;
|
struct regmap *regmap;
|
||||||
unsigned int mclk, sclk;
|
unsigned int mclk, sclk;
|
||||||
@ -376,6 +475,202 @@ static const struct snd_kcontrol_new tas5086_controls[] = {
|
|||||||
tas5086_get_deemph, tas5086_put_deemph),
|
tas5086_get_deemph, tas5086_put_deemph),
|
||||||
};
|
};
|
||||||
|
|
||||||
|
/* Input mux controls */
|
||||||
|
static const char *tas5086_dapm_sdin_texts[] =
|
||||||
|
{
|
||||||
|
"SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
|
||||||
|
"SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8, 8, tas5086_dapm_sdin_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4, 8, tas5086_dapm_sdin_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0, 8, tas5086_dapm_sdin_texts),
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
|
||||||
|
SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
|
||||||
|
SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
|
||||||
|
SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
|
||||||
|
SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
|
||||||
|
SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
|
||||||
|
SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Output mux controls */
|
||||||
|
static const char *tas5086_dapm_channel_texts[] =
|
||||||
|
{ "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
|
||||||
|
"Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };
|
||||||
|
|
||||||
|
static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8, 6, tas5086_dapm_channel_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4, 6, tas5086_dapm_channel_texts),
|
||||||
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0, 6, tas5086_dapm_channel_texts),
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
|
||||||
|
SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
|
||||||
|
SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
|
||||||
|
SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
|
||||||
|
SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
|
||||||
|
SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
|
||||||
|
SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN1-L"),
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN1-R"),
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN2-L"),
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN2-R"),
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN3-L"),
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN3-R"),
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN4-L"),
|
||||||
|
SND_SOC_DAPM_INPUT("SDIN4-R"),
|
||||||
|
|
||||||
|
SND_SOC_DAPM_OUTPUT("PWM1"),
|
||||||
|
SND_SOC_DAPM_OUTPUT("PWM2"),
|
||||||
|
SND_SOC_DAPM_OUTPUT("PWM3"),
|
||||||
|
SND_SOC_DAPM_OUTPUT("PWM4"),
|
||||||
|
SND_SOC_DAPM_OUTPUT("PWM5"),
|
||||||
|
SND_SOC_DAPM_OUTPUT("PWM6"),
|
||||||
|
|
||||||
|
SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_input_mux_controls[0]),
|
||||||
|
SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_input_mux_controls[1]),
|
||||||
|
SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_input_mux_controls[2]),
|
||||||
|
SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_input_mux_controls[3]),
|
||||||
|
SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_input_mux_controls[4]),
|
||||||
|
SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_input_mux_controls[5]),
|
||||||
|
|
||||||
|
SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_output_mux_controls[0]),
|
||||||
|
SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_output_mux_controls[1]),
|
||||||
|
SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_output_mux_controls[2]),
|
||||||
|
SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_output_mux_controls[3]),
|
||||||
|
SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_output_mux_controls[4]),
|
||||||
|
SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
|
||||||
|
&tas5086_dapm_output_mux_controls[5]),
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
|
||||||
|
/* SDIN inputs -> channel muxes */
|
||||||
|
{ "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
|
||||||
|
{ "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
|
||||||
|
{ "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
|
||||||
|
{ "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
|
||||||
|
{ "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
|
||||||
|
{ "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },
|
||||||
|
|
||||||
|
{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
|
||||||
|
{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
|
||||||
|
{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
|
||||||
|
{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
|
||||||
|
{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
|
||||||
|
{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
|
||||||
|
|
||||||
|
{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
|
||||||
|
{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
|
||||||
|
{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
|
||||||
|
{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
|
||||||
|
{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
|
||||||
|
{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
|
||||||
|
|
||||||
|
{ "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
|
||||||
|
{ "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
|
||||||
|
{ "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
|
||||||
|
{ "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
|
||||||
|
{ "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
|
||||||
|
{ "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },
|
||||||
|
|
||||||
|
{ "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
|
||||||
|
{ "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
|
||||||
|
{ "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
|
||||||
|
{ "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
|
||||||
|
{ "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
|
||||||
|
{ "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },
|
||||||
|
|
||||||
|
{ "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
|
||||||
|
{ "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
|
||||||
|
{ "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
|
||||||
|
{ "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
|
||||||
|
{ "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
|
||||||
|
{ "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },
|
||||||
|
|
||||||
|
{ "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
|
||||||
|
{ "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
|
||||||
|
{ "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
|
||||||
|
{ "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
|
||||||
|
{ "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
|
||||||
|
{ "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },
|
||||||
|
|
||||||
|
/* Channel muxes -> PWM muxes */
|
||||||
|
{ "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
||||||
|
{ "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
||||||
|
{ "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
||||||
|
{ "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
||||||
|
{ "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
||||||
|
{ "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
||||||
|
|
||||||
|
{ "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
||||||
|
{ "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
||||||
|
{ "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
||||||
|
{ "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
||||||
|
{ "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
||||||
|
{ "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
||||||
|
|
||||||
|
{ "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
||||||
|
{ "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
||||||
|
{ "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
||||||
|
{ "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
||||||
|
{ "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
||||||
|
{ "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
||||||
|
|
||||||
|
{ "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
||||||
|
{ "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
||||||
|
{ "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
||||||
|
{ "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
||||||
|
{ "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
||||||
|
{ "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
||||||
|
|
||||||
|
{ "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
||||||
|
{ "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
||||||
|
{ "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
||||||
|
{ "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
||||||
|
{ "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
||||||
|
{ "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
||||||
|
|
||||||
|
{ "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
||||||
|
{ "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
||||||
|
{ "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
||||||
|
{ "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
||||||
|
{ "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
||||||
|
{ "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
||||||
|
|
||||||
|
/* The PWM muxes are directly connected to the PWM outputs */
|
||||||
|
{ "PWM1", NULL, "PWM1 Mux" },
|
||||||
|
{ "PWM2", NULL, "PWM2 Mux" },
|
||||||
|
{ "PWM3", NULL, "PWM3 Mux" },
|
||||||
|
{ "PWM4", NULL, "PWM4 Mux" },
|
||||||
|
{ "PWM5", NULL, "PWM5 Mux" },
|
||||||
|
{ "PWM6", NULL, "PWM6 Mux" },
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
static const struct snd_soc_dai_ops tas5086_dai_ops = {
|
static const struct snd_soc_dai_ops tas5086_dai_ops = {
|
||||||
.hw_params = tas5086_hw_params,
|
.hw_params = tas5086_hw_params,
|
||||||
.set_sysclk = tas5086_set_dai_sysclk,
|
.set_sysclk = tas5086_set_dai_sysclk,
|
||||||
@ -426,13 +721,34 @@ static int tas5086_probe(struct snd_soc_codec *codec)
|
|||||||
{
|
{
|
||||||
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
||||||
int charge_period = 1300000; /* hardware default is 1300 ms */
|
int charge_period = 1300000; /* hardware default is 1300 ms */
|
||||||
|
u8 pwm_start_mid_z = 0;
|
||||||
int i, ret;
|
int i, ret;
|
||||||
|
|
||||||
if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) {
|
if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) {
|
||||||
struct device_node *of_node = codec->dev->of_node;
|
struct device_node *of_node = codec->dev->of_node;
|
||||||
of_property_read_u32(of_node, "ti,charge-period", &charge_period);
|
of_property_read_u32(of_node, "ti,charge-period", &charge_period);
|
||||||
|
|
||||||
|
for (i = 0; i < 6; i++) {
|
||||||
|
char name[25];
|
||||||
|
|
||||||
|
snprintf(name, sizeof(name),
|
||||||
|
"ti,mid-z-channel-%d", i + 1);
|
||||||
|
|
||||||
|
if (of_get_property(of_node, name, NULL) != NULL)
|
||||||
|
pwm_start_mid_z |= 1 << i;
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* If any of the channels is configured to start in Mid-Z mode,
|
||||||
|
* configure 'part 1' of the PWM starts to use Mid-Z, and tell
|
||||||
|
* all configured mid-z channels to start start under 'part 1'.
|
||||||
|
*/
|
||||||
|
if (pwm_start_mid_z)
|
||||||
|
regmap_write(priv->regmap, TAS5086_PWM_START,
|
||||||
|
TAS5086_PWM_START_MIDZ_FOR_START_1 |
|
||||||
|
pwm_start_mid_z);
|
||||||
|
|
||||||
/* lookup and set split-capacitor charge period */
|
/* lookup and set split-capacitor charge period */
|
||||||
if (charge_period == 0) {
|
if (charge_period == 0) {
|
||||||
regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
|
regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
|
||||||
@ -490,6 +806,10 @@ static struct snd_soc_codec_driver soc_codec_dev_tas5086 = {
|
|||||||
.resume = tas5086_soc_resume,
|
.resume = tas5086_soc_resume,
|
||||||
.controls = tas5086_controls,
|
.controls = tas5086_controls,
|
||||||
.num_controls = ARRAY_SIZE(tas5086_controls),
|
.num_controls = ARRAY_SIZE(tas5086_controls),
|
||||||
|
.dapm_widgets = tas5086_dapm_widgets,
|
||||||
|
.num_dapm_widgets = ARRAY_SIZE(tas5086_dapm_widgets),
|
||||||
|
.dapm_routes = tas5086_dapm_routes,
|
||||||
|
.num_dapm_routes = ARRAY_SIZE(tas5086_dapm_routes),
|
||||||
};
|
};
|
||||||
|
|
||||||
static const struct i2c_device_id tas5086_i2c_id[] = {
|
static const struct i2c_device_id tas5086_i2c_id[] = {
|
||||||
@ -500,14 +820,16 @@ MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);
|
|||||||
|
|
||||||
static const struct regmap_config tas5086_regmap = {
|
static const struct regmap_config tas5086_regmap = {
|
||||||
.reg_bits = 8,
|
.reg_bits = 8,
|
||||||
.val_bits = 8,
|
.val_bits = 32,
|
||||||
.max_register = ARRAY_SIZE(tas5086_reg_defaults),
|
.max_register = TAS5086_MAX_REGISTER,
|
||||||
.reg_defaults = tas5086_reg_defaults,
|
.reg_defaults = tas5086_reg_defaults,
|
||||||
.num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults),
|
.num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults),
|
||||||
.cache_type = REGCACHE_RBTREE,
|
.cache_type = REGCACHE_RBTREE,
|
||||||
.volatile_reg = tas5086_volatile_reg,
|
.volatile_reg = tas5086_volatile_reg,
|
||||||
.writeable_reg = tas5086_writeable_reg,
|
.writeable_reg = tas5086_writeable_reg,
|
||||||
.readable_reg = tas5086_accessible_reg,
|
.readable_reg = tas5086_accessible_reg,
|
||||||
|
.reg_read = tas5086_reg_read,
|
||||||
|
.reg_write = tas5086_reg_write,
|
||||||
};
|
};
|
||||||
|
|
||||||
static int tas5086_i2c_probe(struct i2c_client *i2c,
|
static int tas5086_i2c_probe(struct i2c_client *i2c,
|
||||||
@ -522,7 +844,7 @@ static int tas5086_i2c_probe(struct i2c_client *i2c,
|
|||||||
if (!priv)
|
if (!priv)
|
||||||
return -ENOMEM;
|
return -ENOMEM;
|
||||||
|
|
||||||
priv->regmap = devm_regmap_init_i2c(i2c, &tas5086_regmap);
|
priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
|
||||||
if (IS_ERR(priv->regmap)) {
|
if (IS_ERR(priv->regmap)) {
|
||||||
ret = PTR_ERR(priv->regmap);
|
ret = PTR_ERR(priv->regmap);
|
||||||
dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
|
dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user