clocksource: Avoid selecting mult values that might overflow when adjusted

For some frequencies, the clocks_calc_mult_shift() function will
unfortunately select mult values very close to 0xffffffff.  This
has the potential to overflow when NTP adjusts the clock, adding
to the mult value.

This patch adds a clocksource.maxadj value, which provides
an approximation of an 11% adjustment(NTP limits adjustments to
500ppm and the tick adjustment is limited to 10%), which could
be made to the clocksource.mult value. This is then used to both
check that the current mult value won't overflow/underflow, as
well as warning us if the timekeeping_adjust() code pushes over
that 11% boundary.

v2: Fix max_adjustment calculation, and improve WARN_ONCE
messages.

v3: Don't warn before maxadj has actually been set

CC: Yong Zhang <yong.zhang0@gmail.com>
CC: David Daney <ddaney.cavm@gmail.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Chen Jie <chenj@lemote.com>
CC: zhangfx <zhangfx@lemote.com>
CC: stable@kernel.org
Reported-by: Chen Jie <chenj@lemote.com>
Reported-by: zhangfx <zhangfx@lemote.com>
Tested-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
This commit is contained in:
John Stultz 2011-10-31 17:06:35 -04:00
parent e35f95b36e
commit d65670a78c
3 changed files with 57 additions and 11 deletions

View File

@ -156,6 +156,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
* @maxadj maximum adjustment value to mult (~11%)
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
@ -172,7 +173,7 @@ struct clocksource {
u32 mult;
u32 shift;
u64 max_idle_ns;
u32 maxadj;
#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
struct arch_clocksource_data archdata;
#endif

View File

@ -491,6 +491,22 @@ void clocksource_touch_watchdog(void)
clocksource_resume_watchdog();
}
/**
* clocksource_max_adjustment- Returns max adjustment amount
* @cs: Pointer to clocksource
*
*/
static u32 clocksource_max_adjustment(struct clocksource *cs)
{
u64 ret;
/*
* We won't try to correct for more then 11% adjustments (110,000 ppm),
*/
ret = (u64)cs->mult * 11;
do_div(ret,100);
return (u32)ret;
}
/**
* clocksource_max_deferment - Returns max time the clocksource can be deferred
* @cs: Pointer to clocksource
@ -503,25 +519,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
/*
* Calculate the maximum number of cycles that we can pass to the
* cyc2ns function without overflowing a 64-bit signed result. The
* maximum number of cycles is equal to ULLONG_MAX/cs->mult which
* is equivalent to the below.
* max_cycles < (2^63)/cs->mult
* max_cycles < 2^(log2((2^63)/cs->mult))
* max_cycles < 2^(log2(2^63) - log2(cs->mult))
* max_cycles < 2^(63 - log2(cs->mult))
* max_cycles < 1 << (63 - log2(cs->mult))
* maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj)
* which is equivalent to the below.
* max_cycles < (2^63)/(cs->mult + cs->maxadj)
* max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj)))
* max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj))
* max_cycles < 2^(63 - log2(cs->mult + cs->maxadj))
* max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj))
* Please note that we add 1 to the result of the log2 to account for
* any rounding errors, ensure the above inequality is satisfied and
* no overflow will occur.
*/
max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1));
max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1));
/*
* The actual maximum number of cycles we can defer the clocksource is
* determined by the minimum of max_cycles and cs->mask.
* Note: Here we subtract the maxadj to make sure we don't sleep for
* too long if there's a large negative adjustment.
*/
max_cycles = min_t(u64, max_cycles, (u64) cs->mask);
max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift);
max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj,
cs->shift);
/*
* To ensure that the clocksource does not wrap whilst we are idle,
@ -640,7 +659,6 @@ static void clocksource_enqueue(struct clocksource *cs)
void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
{
u64 sec;
/*
* Calc the maximum number of seconds which we can run before
* wrapping around. For clocksources which have a mask > 32bit
@ -661,6 +679,20 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
NSEC_PER_SEC / scale, sec * scale);
/*
* for clocksources that have large mults, to avoid overflow.
* Since mult may be adjusted by ntp, add an safety extra margin
*
*/
cs->maxadj = clocksource_max_adjustment(cs);
while ((cs->mult + cs->maxadj < cs->mult)
|| (cs->mult - cs->maxadj > cs->mult)) {
cs->mult >>= 1;
cs->shift--;
cs->maxadj = clocksource_max_adjustment(cs);
}
cs->max_idle_ns = clocksource_max_deferment(cs);
}
EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
@ -701,6 +733,12 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
*/
int clocksource_register(struct clocksource *cs)
{
/* calculate max adjustment for given mult/shift */
cs->maxadj = clocksource_max_adjustment(cs);
WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
"Clocksource %s might overflow on 11%% adjustment\n",
cs->name);
/* calculate max idle time permitted for this clocksource */
cs->max_idle_ns = clocksource_max_deferment(cs);

View File

@ -820,6 +820,13 @@ static void timekeeping_adjust(s64 offset)
} else
return;
WARN_ONCE(timekeeper.clock->maxadj &&
(timekeeper.mult + adj > timekeeper.clock->mult +
timekeeper.clock->maxadj),
"Adjusting %s more then 11%% (%ld vs %ld)\n",
timekeeper.clock->name, (long)timekeeper.mult + adj,
(long)timekeeper.clock->mult +
timekeeper.clock->maxadj);
timekeeper.mult += adj;
timekeeper.xtime_interval += interval;
timekeeper.xtime_nsec -= offset;