leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master'

Browse Source
This commit is contained in:
Jeff Garzik 2005-12-13 01:43:33 -05:00
commit d00d598ffb
21 changed files with 307 additions and 99 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
arch/i386/kernel/smpboot.c
View File

@ -1338,8 +1338,7 @@ int __cpu_disable(void)
if (cpu == 0)
return -EBUSY;
/* We enable the timer again on the exit path of the death loop */
disable_APIC_timer();
clear_local_APIC();
/* Allow any queued timer interrupts to get serviced */
local_irq_enable();
mdelay(1);

37
arch/i386/mm/ioremap.c
View File

@ -223,9 +223,15 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size)
}
EXPORT_SYMBOL(ioremap_nocache);
/**
* iounmap - Free a IO remapping
* @addr: virtual address from ioremap_*
*
* Caller must ensure there is only one unmapping for the same pointer.
*/
void iounmap(volatile void __iomem *addr)
{
struct vm_struct *p;
struct vm_struct *p, *o;
if ((void __force *)addr <= high_memory)
return;
@ -239,22 +245,37 @@ void iounmap(volatile void __iomem *addr)
addr < phys_to_virt(ISA_END_ADDRESS))
return;
write_lock(&vmlist_lock);
p = __remove_vm_area((void *)(PAGE_MASK & (unsigned long __force)addr));
if (!p) {
printk(KERN_WARNING "iounmap: bad address %p\n", addr);
addr = (volatile void *)(PAGE_MASK & (unsigned long __force)addr);
/* Use the vm area unlocked, assuming the caller
ensures there isn't another iounmap for the same address
in parallel. Reuse of the virtual address is prevented by
leaving it in the global lists until we're done with it.
cpa takes care of the direct mappings. */
read_lock(&vmlist_lock);
for (p = vmlist; p; p = p->next) {
if (p->addr == addr)
break;
}
read_unlock(&vmlist_lock);
if (!p) {
printk("iounmap: bad address %p\n", addr);
dump_stack();
goto out_unlock;
return;
}
/* Reset the direct mapping. Can block */
if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) {
change_page_attr(virt_to_page(__va(p->phys_addr)),
p->size >> PAGE_SHIFT,
PAGE_KERNEL);
global_flush_tlb();
}
out_unlock:
write_unlock(&vmlist_lock);
/* Finally remove it */
o = remove_vm_area((void *)addr);
BUG_ON(p != o || o == NULL);
kfree(p);
}
EXPORT_SYMBOL(iounmap);

4
arch/i386/pci/direct.c
View File

@ -13,7 +13,7 @@
#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
static int pci_conf1_read(unsigned int seg, unsigned int bus,
int pci_conf1_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
@ -42,7 +42,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus,
return 0;
}
static int pci_conf1_write(unsigned int seg, unsigned int bus,
int pci_conf1_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
unsigned long flags;

65
arch/i386/pci/mmconfig.c
View File

@ -19,21 +19,25 @@
/* The base address of the last MMCONFIG device accessed */
static u32 mmcfg_last_accessed_device;
static DECLARE_BITMAP(fallback_slots, 32);
/*
* Functions for accessing PCI configuration space with MMCONFIG accesses
*/
static u32 get_base_addr(unsigned int seg, int bus)
static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
{
int cfg_num = -1;
struct acpi_table_mcfg_config *cfg;
if (seg == 0 && bus == 0 &&
test_bit(PCI_SLOT(devfn), fallback_slots))
return 0;
while (1) {
++cfg_num;
if (cfg_num >= pci_mmcfg_config_num) {
/* something bad is going on, no cfg table is found. */
/* so we fall back to the old way we used to do this */
/* and just rely on the first entry to be correct. */
return pci_mmcfg_config[0].base_address;
/* Not found - fallback to type 1 */
return 0;
}
cfg = &pci_mmcfg_config[cfg_num];
if (cfg->pci_segment_group_number != seg)
@ -44,9 +48,9 @@ static u32 get_base_addr(unsigned int seg, int bus)
}
}
static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn)
static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
{
u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12);
u32 dev_base = base | (bus << 20) | (devfn << 12);
if (dev_base != mmcfg_last_accessed_device) {
mmcfg_last_accessed_device = dev_base;
set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
@ -57,13 +61,18 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
u32 base;
if (!value || (bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
base = get_base_addr(seg, bus, devfn);
if (!base)
return pci_conf1_read(seg,bus,devfn,reg,len,value);
spin_lock_irqsave(&pci_config_lock, flags);
pci_exp_set_dev_base(seg, bus, devfn);
pci_exp_set_dev_base(base, bus, devfn);
switch (len) {
case 1:
@ -86,13 +95,18 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
unsigned long flags;
u32 base;
if ((bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
base = get_base_addr(seg, bus, devfn);
if (!base)
return pci_conf1_write(seg,bus,devfn,reg,len,value);
spin_lock_irqsave(&pci_config_lock, flags);
pci_exp_set_dev_base(seg, bus, devfn);
pci_exp_set_dev_base(base, bus, devfn);
switch (len) {
case 1:
@ -116,6 +130,37 @@ static struct pci_raw_ops pci_mmcfg = {
.write = pci_mmcfg_write,
};
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
and fallback for them.
We only do this for bus 0/seg 0 */
static __init void unreachable_devices(void)
{
int i;
unsigned long flags;
for (i = 0; i < 32; i++) {
u32 val1;
u32 addr;
pci_conf1_read(0, 0, PCI_DEVFN(i, 0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
/* Locking probably not needed, but safer */
spin_lock_irqsave(&pci_config_lock, flags);
addr = get_base_addr(0, 0, PCI_DEVFN(i, 0));
if (addr != 0)
pci_exp_set_dev_base(addr, 0, PCI_DEVFN(i, 0));
if (addr == 0 || readl((u32 *)addr) != val1)
set_bit(i, fallback_slots);
spin_unlock_irqrestore(&pci_config_lock, flags);
}
}
static int __init pci_mmcfg_init(void)
{
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
@ -131,6 +176,8 @@ static int __init pci_mmcfg_init(void)
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
unreachable_devices();
out:
return 0;
}

7
arch/i386/pci/pci.h
View File

@ -74,3 +74,10 @@ extern spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
extern int pci_conf1_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value);
extern int pci_conf1_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value);

3
arch/x86_64/ia32/ia32_binfmt.c
View File

@ -217,8 +217,7 @@ elf_core_copy_task_fpregs(struct task_struct *tsk, struct pt_regs *regs, elf_fpr
if (!tsk_used_math(tsk))
return 0;
if (!regs)
regs = (struct pt_regs *)tsk->thread.rsp0;
--regs;
regs = ((struct pt_regs *)tsk->thread.rsp0) - 1;
if (tsk == current)
unlazy_fpu(tsk);
set_fs(KERNEL_DS);

2
arch/x86_64/kernel/smpboot.c
View File

@ -1181,7 +1181,7 @@ int __cpu_disable(void)
if (cpu == 0)
return -EBUSY;
disable_APIC_timer();
clear_local_APIC();
/*
* HACK:

6
arch/x86_64/kernel/time.c
View File

@ -59,7 +59,7 @@ static int notsc __initdata = 0;
unsigned int cpu_khz; /* TSC clocks / usec, not used here */
static unsigned long hpet_period; /* fsecs / HPET clock */
unsigned long hpet_tick; /* HPET clocks / interrupt */
static int hpet_use_timer;
static int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */
unsigned long vxtime_hz = PIT_TICK_RATE;
int report_lost_ticks; /* command line option */
unsigned long long monotonic_base;
@ -908,12 +908,14 @@ void __init time_init(void)
if (!hpet_init())
vxtime_hz = (1000000000000000L + hpet_period / 2) /
hpet_period;
else
vxtime.hpet_address = 0;
if (hpet_use_timer) {
cpu_khz = hpet_calibrate_tsc();
timename = "HPET";
#ifdef CONFIG_X86_PM_TIMER
} else if (pmtmr_ioport) {
} else if (pmtmr_ioport && !vxtime.hpet_address) {
vxtime_hz = PM_TIMER_FREQUENCY;
timename = "PM";
pit_init();

37
arch/x86_64/mm/ioremap.c
View File

@ -247,9 +247,15 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size)
return __ioremap(phys_addr, size, _PAGE_PCD);
}
/**
* iounmap - Free a IO remapping
* @addr: virtual address from ioremap_*
*
* Caller must ensure there is only one unmapping for the same pointer.
*/
void iounmap(volatile void __iomem *addr)
{
struct vm_struct *p;
struct vm_struct *p, *o;
if (addr <= high_memory)
return;
@ -257,12 +263,31 @@ void iounmap(volatile void __iomem *addr)
addr < phys_to_virt(ISA_END_ADDRESS))
return;
write_lock(&vmlist_lock);
p = __remove_vm_area((void *)((unsigned long)addr & PAGE_MASK));
if (!p)
addr = (volatile void *)(PAGE_MASK & (unsigned long __force)addr);
/* Use the vm area unlocked, assuming the caller
ensures there isn't another iounmap for the same address
in parallel. Reuse of the virtual address is prevented by
leaving it in the global lists until we're done with it.
cpa takes care of the direct mappings. */
read_lock(&vmlist_lock);
for (p = vmlist; p; p = p->next) {
if (p->addr == addr)
break;
}
read_unlock(&vmlist_lock);
if (!p) {
printk("iounmap: bad address %p\n", addr);
else if (p->flags >> 20)
dump_stack();
return;
}
/* Reset the direct mapping. Can block */
if (p->flags >> 20)
ioremap_change_attr(p->phys_addr, p->size, 0);
write_unlock(&vmlist_lock);
/* Finally remove it */
o = remove_vm_area((void *)addr);
BUG_ON(p != o || o == NULL);
kfree(p);
}

4
arch/x86_64/mm/numa.c
View File

@ -53,6 +53,8 @@ static int __init populate_memnodemap(
int res = -1;
unsigned long addr, end;
if (shift >= 64)
return -1;
memset(memnodemap, 0xff, sizeof(memnodemap));
for (i = 0; i < numnodes; i++) {
addr = nodes[i].start;
@ -65,7 +67,7 @@ static int __init populate_memnodemap(
if (memnodemap[addr >> shift] != 0xff)
return -1;
memnodemap[addr >> shift] = i;
addr += (1 << shift);
addr += (1UL << shift);
} while (addr < end);
res = 1;
}

63
arch/x86_64/pci/mmconfig.c
View File

@ -8,10 +8,13 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include "pci.h"
#define MMCONFIG_APER_SIZE (256*1024*1024)
static DECLARE_BITMAP(fallback_slots, 32);
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
struct acpi_table_mcfg_config *cfg;
@ -19,7 +22,7 @@ struct mmcfg_virt {
};
static struct mmcfg_virt *pci_mmcfg_virt;
static char *get_virt(unsigned int seg, int bus)
static char *get_virt(unsigned int seg, unsigned bus)
{
int cfg_num = -1;
struct acpi_table_mcfg_config *cfg;
@ -27,10 +30,9 @@ static char *get_virt(unsigned int seg, int bus)
while (1) {
++cfg_num;
if (cfg_num >= pci_mmcfg_config_num) {
/* something bad is going on, no cfg table is found. */
/* so we fall back to the old way we used to do this */
/* and just rely on the first entry to be correct. */
return pci_mmcfg_virt[0].virt;
/* Not found - fall back to type 1. This happens
e.g. on the internal devices of a K8 northbridge. */
return NULL;
}
cfg = pci_mmcfg_virt[cfg_num].cfg;
if (cfg->pci_segment_group_number != seg)
@ -41,20 +43,30 @@ static char *get_virt(unsigned int seg, int bus)
}
}
static inline char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
static char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
{
return get_virt(seg, bus) + ((bus << 20) | (devfn << 12));
char *addr;
if (seg == 0 && bus == 0 && test_bit(PCI_SLOT(devfn), &fallback_slots))
return NULL;
addr = get_virt(seg, bus);
if (!addr)
return NULL;
return addr + ((bus << 20) | (devfn << 12));
}
static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
char *addr = pci_dev_base(seg, bus, devfn);
char *addr;
/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095)))
return -EINVAL;
addr = pci_dev_base(seg, bus, devfn);
if (!addr)
return pci_conf1_read(seg,bus,devfn,reg,len,value);
switch (len) {
case 1:
*value = readb(addr + reg);
@ -73,11 +85,16 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
char *addr = pci_dev_base(seg, bus, devfn);
char *addr;
/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
return -EINVAL;
addr = pci_dev_base(seg, bus, devfn);
if (!addr)
return pci_conf1_write(seg,bus,devfn,reg,len,value);
switch (len) {
case 1:
writeb(value, addr + reg);
@ -98,6 +115,30 @@ static struct pci_raw_ops pci_mmcfg = {
.write = pci_mmcfg_write,
};
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
and fallback for them.
We only do this for bus 0/seg 0 */
static __init void unreachable_devices(void)
{
int i;
for (i = 0; i < 32; i++) {
u32 val1;
char *addr;
pci_conf1_read(0, 0, PCI_DEVFN(i,0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
addr = pci_dev_base(0, 0, PCI_DEVFN(i, 0));
if (addr == NULL|| readl(addr) != val1) {
set_bit(i, &fallback_slots);
}
}
}
static int __init pci_mmcfg_init(void)
{
int i;
@ -128,6 +169,8 @@ static int __init pci_mmcfg_init(void)
printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
}
unreachable_devices();
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;

4
drivers/block/cciss.c
View File

@ -1464,8 +1464,10 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
request_queue_t *q = disk->queue;
if (disk->flags & GENHD_FL_UP)
del_gendisk(disk);
if (q)
if (q) {
blk_cleanup_queue(q);
drv->queue = NULL;
}
}
}

2
drivers/char/drm/radeon_cp.c
View File

@ -1522,7 +1522,7 @@ static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init)
dev_priv->gart_size = init->gart_size;
dev_priv->gart_vm_start = dev_priv->fb_location
+ RADEON_READ(RADEON_CONFIG_APER_SIZE);
+ RADEON_READ(RADEON_CONFIG_APER_SIZE) * 2;
#if __OS_HAS_AGP
if (!dev_priv->is_pci)

10
drivers/net/skge.c
View File

@ -2280,11 +2280,13 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev)
}
if (unlikely(skge->tx_avail < skb_shinfo(skb)->nr_frags +1)) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&skge->tx_lock, flags);
if (!netif_stopped(dev)) {
netif_stop_queue(dev);
printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
dev->name);
printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
dev->name);
}
spin_unlock_irqrestore(&skge->tx_lock, flags);
return NETDEV_TX_BUSY;
}

8
drivers/video/cfbcopyarea.c
View File

@ -64,8 +64,8 @@ bitcpy(unsigned long __iomem *dst, int dst_idx, const unsigned long __iomem *src
int const shift = dst_idx-src_idx;
int left, right;
first = ~0UL >> dst_idx;
last = ~(~0UL >> ((dst_idx+n) % bits));
first = FB_SHIFT_HIGH(~0UL, dst_idx);
last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits));
if (!shift) {
// Same alignment for source and dest
@ -216,8 +216,8 @@ bitcpy_rev(unsigned long __iomem *dst, int dst_idx, const unsigned long __iomem
shift = dst_idx-src_idx;
first = ~0UL << (bits - 1 - dst_idx);
last = ~(~0UL << (bits - 1 - ((dst_idx-n) % bits)));
first = FB_SHIFT_LOW(~0UL, bits - 1 - dst_idx);
last = ~(FB_SHIFT_LOW(~0UL, bits - 1 - ((dst_idx-n) % bits)));
if (!shift) {
// Same alignment for source and dest

16
drivers/video/cfbfillrect.c
View File

@ -110,8 +110,8 @@ bitfill_aligned(unsigned long __iomem *dst, int dst_idx, unsigned long pat, unsi
if (!n)
return;
first = ~0UL >> dst_idx;
last = ~(~0UL >> ((dst_idx+n) % bits));
first = FB_SHIFT_HIGH(~0UL, dst_idx);
last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits));
if (dst_idx+n <= bits) {
// Single word
@ -167,8 +167,8 @@ bitfill_unaligned(unsigned long __iomem *dst, int dst_idx, unsigned long pat,
if (!n)
return;
first = ~0UL >> dst_idx;
last = ~(~0UL >> ((dst_idx+n) % bits));
first = FB_SHIFT_HIGH(~0UL, dst_idx);
last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits));
if (dst_idx+n <= bits) {
// Single word
@ -221,8 +221,8 @@ bitfill_aligned_rev(unsigned long __iomem *dst, int dst_idx, unsigned long pat,
if (!n)
return;
first = ~0UL >> dst_idx;
last = ~(~0UL >> ((dst_idx+n) % bits));
first = FB_SHIFT_HIGH(~0UL, dst_idx);
last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits));
if (dst_idx+n <= bits) {
// Single word
@ -290,8 +290,8 @@ bitfill_unaligned_rev(unsigned long __iomem *dst, int dst_idx, unsigned long pat
if (!n)
return;
first = ~0UL >> dst_idx;
last = ~(~0UL >> ((dst_idx+n) % bits));
first = FB_SHIFT_HIGH(~0UL, dst_idx);
last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits));
if (dst_idx+n <= bits) {
// Single word

35
drivers/video/cfbimgblt.c
View File

@ -76,18 +76,6 @@ static u32 cfb_tab32[] = {
#define FB_WRITEL fb_writel
#define FB_READL fb_readl
#if defined (__BIG_ENDIAN)
#define LEFT_POS(bpp) (32 - bpp)
#define SHIFT_HIGH(val, bits) ((val) >> (bits))
#define SHIFT_LOW(val, bits) ((val) << (bits))
#define BIT_NR(b) (7 - (b))
#else
#define LEFT_POS(bpp) (0)
#define SHIFT_HIGH(val, bits) ((val) << (bits))
#define SHIFT_LOW(val, bits) ((val) >> (bits))
#define BIT_NR(b) (b)
#endif
static inline void color_imageblit(const struct fb_image *image,
struct fb_info *p, u8 __iomem *dst1,
u32 start_index,
@ -109,7 +97,7 @@ static inline void color_imageblit(const struct fb_image *image,
val = 0;
if (start_index) {
u32 start_mask = ~(SHIFT_HIGH(~(u32)0, start_index));
u32 start_mask = ~(FB_SHIFT_HIGH(~(u32)0, start_index));
val = FB_READL(dst) & start_mask;
shift = start_index;
}
@ -119,20 +107,20 @@ static inline void color_imageblit(const struct fb_image *image,
color = palette[*src];
else
color = *src;
color <<= LEFT_POS(bpp);
val |= SHIFT_HIGH(color, shift);
color <<= FB_LEFT_POS(bpp);
val |= FB_SHIFT_HIGH(color, shift);
if (shift >= null_bits) {
FB_WRITEL(val, dst++);
val = (shift == null_bits) ? 0 :
SHIFT_LOW(color, 32 - shift);
FB_SHIFT_LOW(color, 32 - shift);
}
shift += bpp;
shift &= (32 - 1);
src++;
}
if (shift) {
u32 end_mask = SHIFT_HIGH(~(u32)0, shift);
u32 end_mask = FB_SHIFT_HIGH(~(u32)0, shift);
FB_WRITEL((FB_READL(dst) & end_mask) | val, dst);
}
@ -162,6 +150,8 @@ static inline void slow_imageblit(const struct fb_image *image, struct fb_info *
u32 i, j, l;
dst2 = (u32 __iomem *) dst1;
fgcolor <<= FB_LEFT_POS(bpp);
bgcolor <<= FB_LEFT_POS(bpp);
for (i = image->height; i--; ) {
shift = val = 0;
@ -172,22 +162,21 @@ static inline void slow_imageblit(const struct fb_image *image, struct fb_info *
/* write leading bits */
if (start_index) {
u32 start_mask = ~(SHIFT_HIGH(~(u32)0, start_index));
u32 start_mask = ~(FB_SHIFT_HIGH(~(u32)0,start_index));
val = FB_READL(dst) & start_mask;
shift = start_index;
}
while (j--) {
l--;
color = (*s & 1 << (BIT_NR(l))) ? fgcolor : bgcolor;
color <<= LEFT_POS(bpp);
val |= SHIFT_HIGH(color, shift);
color = (*s & 1 << (FB_BIT_NR(l))) ? fgcolor : bgcolor;
val |= FB_SHIFT_HIGH(color, shift);
/* Did the bitshift spill bits to the next long? */
if (shift >= null_bits) {
FB_WRITEL(val, dst++);
val = (shift == null_bits) ? 0 :
SHIFT_LOW(color,32 - shift);
FB_SHIFT_LOW(color,32 - shift);
}
shift += bpp;
shift &= (32 - 1);
@ -196,7 +185,7 @@ static inline void slow_imageblit(const struct fb_image *image, struct fb_info *
/* write trailing bits */
if (shift) {
u32 end_mask = SHIFT_HIGH(~(u32)0, shift);
u32 end_mask = FB_SHIFT_HIGH(~(u32)0, shift);
FB_WRITEL((FB_READL(dst) & end_mask) | val, dst);
}

42
drivers/video/console/fbcon.c
View File

@ -2048,7 +2048,7 @@ static int fbcon_switch(struct vc_data *vc)
struct fbcon_ops *ops;
struct display *p = &fb_display[vc->vc_num];
struct fb_var_screeninfo var;
int i, prev_console;
int i, prev_console, charcnt = 256;
info = registered_fb[con2fb_map[vc->vc_num]];
ops = info->fbcon_par;
@ -2103,7 +2103,8 @@ static int fbcon_switch(struct vc_data *vc)
fb_set_var(info, &var);
ops->var = info->var;
if (old_info != NULL && old_info != info) {
if (old_info != NULL && (old_info != info ||
info->flags & FBINFO_MISC_ALWAYS_SETPAR)) {
if (info->fbops->fb_set_par)
info->fbops->fb_set_par(info);
fbcon_del_cursor_timer(old_info);
@ -2120,6 +2121,13 @@ static int fbcon_switch(struct vc_data *vc)
vc->vc_can_do_color = (fb_get_color_depth(&info->var, &info->fix)!=1);
vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;
if (p->userfont)
charcnt = FNTCHARCNT(vc->vc_font.data);
if (charcnt > 256)
vc->vc_complement_mask <<= 1;
updatescrollmode(p, info, vc);
switch (p->scrollmode) {
@ -2139,8 +2147,12 @@ static int fbcon_switch(struct vc_data *vc)
scrollback_max = 0;
scrollback_current = 0;
ops->var.xoffset = ops->var.yoffset = p->yscroll = 0;
ops->update_start(info);
if (!fbcon_is_inactive(vc, info)) {
ops->var.xoffset = ops->var.yoffset = p->yscroll = 0;
ops->update_start(info);
}
fbcon_set_palette(vc, color_table);
fbcon_clear_margins(vc, 0);
@ -2184,11 +2196,14 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
ops->graphics = 1;
if (!blank) {
if (info->fbops->fb_save_state)
info->fbops->fb_save_state(info);
var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE;
fb_set_var(info, &var);
ops->graphics = 0;
ops->var = info->var;
}
} else if (info->fbops->fb_restore_state)
info->fbops->fb_restore_state(info);
}
if (!fbcon_is_inactive(vc, info)) {
@ -2736,8 +2751,12 @@ static void fbcon_modechanged(struct fb_info *info)
updatescrollmode(p, info, vc);
scrollback_max = 0;
scrollback_current = 0;
ops->var.xoffset = ops->var.yoffset = p->yscroll = 0;
ops->update_start(info);
if (!fbcon_is_inactive(vc, info)) {
ops->var.xoffset = ops->var.yoffset = p->yscroll = 0;
ops->update_start(info);
}
fbcon_set_palette(vc, color_table);
update_screen(vc);
if (softback_buf)
@ -2774,8 +2793,13 @@ static void fbcon_set_all_vcs(struct fb_info *info)
updatescrollmode(p, info, vc);
scrollback_max = 0;
scrollback_current = 0;
ops->var.xoffset = ops->var.yoffset = p->yscroll = 0;
ops->update_start(info);
if (!fbcon_is_inactive(vc, info)) {
ops->var.xoffset = ops->var.yoffset =
p->yscroll = 0;
ops->update_start(info);
}
fbcon_set_palette(vc, color_table);
update_screen(vc);
if (softback_buf)

26
drivers/video/fbmem.c
View File

@ -722,14 +722,30 @@ static void try_to_load(int fb)
int
fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
{
struct fb_fix_screeninfo *fix = &info->fix;
int xoffset = var->xoffset;
int yoffset = var->yoffset;
int err;
int err = 0, yres = info->var.yres;
if (var->yoffset > 0) {
if (var->vmode & FB_VMODE_YWRAP) {
if (!fix->ywrapstep || (var->yoffset % fix->ywrapstep))
err = -EINVAL;
else
yres = 0;
} else if (!fix->ypanstep || (var->yoffset % fix->ypanstep))
err = -EINVAL;
}
if (var->xoffset > 0 && (!fix->xpanstep ||
(var->xoffset % fix->xpanstep)))
err = -EINVAL;
if (err || !info->fbops->fb_pan_display || xoffset < 0 ||
yoffset < 0 || var->yoffset + yres > info->var.yres_virtual ||
var->xoffset + info->var.xres > info->var.xres_virtual)
return -EINVAL;
if (xoffset < 0 || yoffset < 0 || !info->fbops->fb_pan_display ||
xoffset + info->var.xres > info->var.xres_virtual ||
yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
if ((err = info->fbops->fb_pan_display(var, info)))
return err;
info->var.xoffset = var->xoffset;

30
include/linux/fb.h
View File

@ -617,6 +617,12 @@ struct fb_ops {
/* perform fb specific mmap */
int (*fb_mmap)(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
/* save current hardware state */
void (*fb_save_state)(struct fb_info *info);
/* restore saved state */
void (*fb_restore_state)(struct fb_info *info);
};
#ifdef CONFIG_FB_TILEBLITTING
@ -726,6 +732,18 @@ struct fb_tile_ops {
from userspace */
#define FBINFO_MISC_TILEBLITTING 0x20000 /* use tile blitting */
/* A driver may set this flag to indicate that it does want a set_par to be
* called every time when fbcon_switch is executed. The advantage is that with
* this flag set you can really be shure that set_par is always called before
* any of the functions dependant on the correct hardware state or altering
* that state, even if you are using some broken X releases. The disadvantage
* is that it introduces unwanted delays to every console switch if set_par
* is slow. It is a good idea to try this flag in the drivers initialization
* code whenever there is a bug report related to switching between X and the
* framebuffer console.
*/
#define FBINFO_MISC_ALWAYS_SETPAR 0x40000
struct fb_info {
int node;
int flags;
@ -815,6 +833,18 @@ struct fb_info {
#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b))
#define fb_memset memset
#endif
#if defined (__BIG_ENDIAN)
#define FB_LEFT_POS(bpp) (32 - bpp)
#define FB_SHIFT_HIGH(val, bits) ((val) >> (bits))
#define FB_SHIFT_LOW(val, bits) ((val) << (bits))
#define FB_BIT_NR(b) (7 - (b))
#else
#define FB_LEFT_POS(bpp) (0)
#define FB_SHIFT_HIGH(val, bits) ((val) << (bits))
#define FB_SHIFT_LOW(val, bits) ((val) >> (bits))
#define FB_BIT_NR(b) (b)
#endif
/*

2
net/ieee80211/Kconfig
View File

@ -55,7 +55,7 @@ config IEEE80211_CRYPT_CCMP
config IEEE80211_CRYPT_TKIP
tristate "IEEE 802.11i TKIP encryption"
depends on IEEE80211
depends on IEEE80211 && NET_RADIO
select CRYPTO
select CRYPTO_MICHAEL_MIC
---help---