Merge remote-tracking branches 'asoc/topic/rt5677', 'asoc/topic/samsung' and 'asoc/topic/sgtl5000' into asoc-next

Documentation/devicetree/bindings/sound/rt5677.txt

@@ -18,6 +18,7 @@ Required properties:
 Optional properties:
 
 - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
+- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin.
 
 - realtek,in1-differential
 - realtek,in2-differential
@@ -70,6 +71,7 @@ rt5677 {
 
 	realtek,pow-ldo2-gpio =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+	realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
 	realtek,in1-differential = "true";
 	realtek,gpio-config = /bits/ 8  <0 0 0 0 0 2>;   /* pull up GPIO6 */
 	realtek,jd2-gpio = <3>;  /* Enables Jack detection for GPIO6 */

sound/soc/codecs/rt5677.c

@@ -1060,6 +1060,7 @@ int rt5677_sel_asrc_clk_src(struct snd_soc_codec *codec,
 	unsigned int asrc5_mask = 0, asrc5_value = 0;
 	unsigned int asrc6_mask = 0, asrc6_value = 0;
 	unsigned int asrc7_mask = 0, asrc7_value = 0;
+	unsigned int asrc8_mask = 0, asrc8_value = 0;
 
 	switch (clk_src) {
 	case RT5677_CLK_SEL_SYS:
@@ -1196,10 +1197,108 @@ int rt5677_sel_asrc_clk_src(struct snd_soc_codec *codec,
 		regmap_update_bits(rt5677->regmap, RT5677_ASRC_7, asrc7_mask,
 			asrc7_value);
 
+	/* ASRC 8 */
+	if (filter_mask & RT5677_I2S1_SOURCE) {
+		asrc8_mask |= RT5677_I2S1_CLK_SEL_MASK;
+		asrc8_value = (asrc8_value & ~RT5677_I2S1_CLK_SEL_MASK)
+			| ((clk_src - 1) << RT5677_I2S1_CLK_SEL_SFT);
+	}
+
+	if (filter_mask & RT5677_I2S2_SOURCE) {
+		asrc8_mask |= RT5677_I2S2_CLK_SEL_MASK;
+		asrc8_value = (asrc8_value & ~RT5677_I2S2_CLK_SEL_MASK)
+			| ((clk_src - 1) << RT5677_I2S2_CLK_SEL_SFT);
+	}
+
+	if (filter_mask & RT5677_I2S3_SOURCE) {
+		asrc8_mask |= RT5677_I2S3_CLK_SEL_MASK;
+		asrc8_value = (asrc8_value & ~RT5677_I2S3_CLK_SEL_MASK)
+			| ((clk_src - 1) << RT5677_I2S3_CLK_SEL_SFT);
+	}
+
+	if (filter_mask & RT5677_I2S4_SOURCE) {
+		asrc8_mask |= RT5677_I2S4_CLK_SEL_MASK;
+		asrc8_value = (asrc8_value & ~RT5677_I2S4_CLK_SEL_MASK)
+			| ((clk_src - 1) << RT5677_I2S4_CLK_SEL_SFT);
+	}
+
+	if (asrc8_mask)
+		regmap_update_bits(rt5677->regmap, RT5677_ASRC_8, asrc8_mask,
+			asrc8_value);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rt5677_sel_asrc_clk_src);
 
+static int rt5677_dmic_use_asrc(struct snd_soc_dapm_widget *source,
+			 struct snd_soc_dapm_widget *sink)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(source->dapm);
+	struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
+	unsigned int asrc_setting;
+
+	switch (source->shift) {
+	case 11:
+		regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+		asrc_setting = (asrc_setting & RT5677_AD_STO1_CLK_SEL_MASK) >>
+				RT5677_AD_STO1_CLK_SEL_SFT;
+		if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+			asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+			return 1;
+		break;
+
+	case 10:
+		regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+		asrc_setting = (asrc_setting & RT5677_AD_STO2_CLK_SEL_MASK) >>
+				RT5677_AD_STO2_CLK_SEL_SFT;
+		if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+			asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+			return 1;
+		break;
+
+	case 9:
+		regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+		asrc_setting = (asrc_setting & RT5677_AD_STO3_CLK_SEL_MASK) >>
+				RT5677_AD_STO3_CLK_SEL_SFT;
+		if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+			asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+			return 1;
+		break;
+
+	case 8:
+		regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting);
+		asrc_setting = (asrc_setting & RT5677_AD_STO4_CLK_SEL_MASK) >>
+			RT5677_AD_STO4_CLK_SEL_SFT;
+		if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+			asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+			return 1;
+		break;
+
+	case 7:
+		regmap_read(rt5677->regmap, RT5677_ASRC_6, &asrc_setting);
+		asrc_setting = (asrc_setting & RT5677_AD_MONOL_CLK_SEL_MASK) >>
+			RT5677_AD_MONOL_CLK_SEL_SFT;
+		if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+			asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+			return 1;
+		break;
+
+	case 6:
+		regmap_read(rt5677->regmap, RT5677_ASRC_6, &asrc_setting);
+		asrc_setting = (asrc_setting & RT5677_AD_MONOR_CLK_SEL_MASK) >>
+			RT5677_AD_MONOR_CLK_SEL_SFT;
+		if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC &&
+			asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC)
+			return 1;
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 /* Digital Mixer */
 static const struct snd_kcontrol_new rt5677_sto1_adc_l_mix[] = {
 	SOC_DAPM_SINGLE("ADC1 Switch", RT5677_STO1_ADC_MIXER,
@@ -3057,12 +3156,12 @@ static const struct snd_soc_dapm_widget rt5677_dapm_widgets[] = {
 };
 
 static const struct snd_soc_dapm_route rt5677_dapm_routes[] = {
-	{ "Stereo1 DMIC Mux", NULL, "DMIC STO1 ASRC", can_use_asrc },
+	{ "Stereo1 DMIC Mux", NULL, "DMIC STO1 ASRC", rt5677_dmic_use_asrc },
-	{ "Stereo2 DMIC Mux", NULL, "DMIC STO2 ASRC", can_use_asrc },
+	{ "Stereo2 DMIC Mux", NULL, "DMIC STO2 ASRC", rt5677_dmic_use_asrc },
-	{ "Stereo3 DMIC Mux", NULL, "DMIC STO3 ASRC", can_use_asrc },
+	{ "Stereo3 DMIC Mux", NULL, "DMIC STO3 ASRC", rt5677_dmic_use_asrc },
-	{ "Stereo4 DMIC Mux", NULL, "DMIC STO4 ASRC", can_use_asrc },
+	{ "Stereo4 DMIC Mux", NULL, "DMIC STO4 ASRC", rt5677_dmic_use_asrc },
-	{ "Mono DMIC L Mux", NULL, "DMIC MONO L ASRC", can_use_asrc },
+	{ "Mono DMIC L Mux", NULL, "DMIC MONO L ASRC", rt5677_dmic_use_asrc },
-	{ "Mono DMIC R Mux", NULL, "DMIC MONO R ASRC", can_use_asrc },
+	{ "Mono DMIC R Mux", NULL, "DMIC MONO R ASRC", rt5677_dmic_use_asrc },
 	{ "I2S1", NULL, "I2S1 ASRC", can_use_asrc},
 	{ "I2S2", NULL, "I2S2 ASRC", can_use_asrc},
 	{ "I2S3", NULL, "I2S3 ASRC", can_use_asrc},
@@ -4667,6 +4766,8 @@ static int rt5677_remove(struct snd_soc_codec *codec)
 	regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec);
 	if (gpio_is_valid(rt5677->pow_ldo2))
 		gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
+	if (gpio_is_valid(rt5677->reset_pin))
+		gpio_set_value_cansleep(rt5677->reset_pin, 0);
 
 	return 0;
 }
@@ -4682,6 +4783,8 @@ static int rt5677_suspend(struct snd_soc_codec *codec)
 
 		if (gpio_is_valid(rt5677->pow_ldo2))
 			gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
+		if (gpio_is_valid(rt5677->reset_pin))
+			gpio_set_value_cansleep(rt5677->reset_pin, 0);
 	}
 
 	return 0;
@@ -4692,10 +4795,13 @@ static int rt5677_resume(struct snd_soc_codec *codec)
 	struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
 
 	if (!rt5677->dsp_vad_en) {
-		if (gpio_is_valid(rt5677->pow_ldo2)) {
+		if (gpio_is_valid(rt5677->pow_ldo2))
 			gpio_set_value_cansleep(rt5677->pow_ldo2, 1);
+		if (gpio_is_valid(rt5677->reset_pin))
+			gpio_set_value_cansleep(rt5677->reset_pin, 1);
+		if (gpio_is_valid(rt5677->pow_ldo2) ||
+		    gpio_is_valid(rt5677->reset_pin))
 			msleep(10);
-		}
 
 		regcache_cache_only(rt5677->regmap, false);
 		regcache_sync(rt5677->regmap);
@@ -4933,6 +5039,8 @@ static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np)
 
 	rt5677->pow_ldo2 = of_get_named_gpio(np,
 					"realtek,pow-ldo2-gpio", 0);
+	rt5677->reset_pin = of_get_named_gpio(np,
+					"realtek,reset-gpio", 0);
 
 	/*
 	 * POW_LDO2 is optional (it may be statically tied on the board).
@@ -4943,6 +5051,9 @@ static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np)
 	if (!gpio_is_valid(rt5677->pow_ldo2) &&
 			(rt5677->pow_ldo2 != -ENOENT))
 		return rt5677->pow_ldo2;
+	if (!gpio_is_valid(rt5677->reset_pin) &&
+			(rt5677->reset_pin != -ENOENT))
+		return rt5677->reset_pin;
 
 	of_property_read_u8_array(np, "realtek,gpio-config",
 		rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
@@ -5044,6 +5155,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
 		}
 	} else {
 		rt5677->pow_ldo2 = -EINVAL;
+		rt5677->reset_pin = -EINVAL;
 	}
 
 	if (gpio_is_valid(rt5677->pow_ldo2)) {
@@ -5055,6 +5167,21 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
 				rt5677->pow_ldo2, ret);
 			return ret;
 		}
+	}
+
+	if (gpio_is_valid(rt5677->reset_pin)) {
+		ret = devm_gpio_request_one(&i2c->dev, rt5677->reset_pin,
+					    GPIOF_OUT_INIT_HIGH,
+					    "RT5677 RESET");
+		if (ret < 0) {
+			dev_err(&i2c->dev, "Failed to request RESET %d: %d\n",
+				rt5677->reset_pin, ret);
+			return ret;
+		}
+	}
+
+	if (gpio_is_valid(rt5677->pow_ldo2) ||
+	    gpio_is_valid(rt5677->reset_pin)) {
 		/* Wait a while until I2C bus becomes available. The datasheet
 		 * does not specify the exact we should wait but startup
 		 * sequence mentiones at least a few milliseconds.

sound/soc/codecs/rt5677.h

@@ -1446,6 +1446,16 @@
 #define RT5677_DSP_OB_4_7_CLK_SEL_MASK		(0xf << 8)
 #define RT5677_DSP_OB_4_7_CLK_SEL_SFT		8
 
+/* ASRC Control 8 (0x8a) */
+#define RT5677_I2S1_CLK_SEL_MASK		(0xf << 12)
+#define RT5677_I2S1_CLK_SEL_SFT			12
+#define RT5677_I2S2_CLK_SEL_MASK		(0xf << 8)
+#define RT5677_I2S2_CLK_SEL_SFT			8
+#define RT5677_I2S3_CLK_SEL_MASK		(0xf << 4)
+#define RT5677_I2S3_CLK_SEL_SFT			4
+#define RT5677_I2S4_CLK_SEL_MASK		(0xf)
+#define RT5677_I2S4_CLK_SEL_SFT			0
+
 /* VAD Function Control 4 (0x9f) */
 #define RT5677_VAD_SRC_MASK			(0x7 << 8)
 #define RT5677_VAD_SRC_SFT			8
@@ -1744,6 +1754,10 @@ enum {
 	RT5677_AD_MONO_R_FILTER = (0x1 << 12),
 	RT5677_DSP_OB_0_3_FILTER = (0x1 << 13),
 	RT5677_DSP_OB_4_7_FILTER = (0x1 << 14),
+	RT5677_I2S1_SOURCE = (0x1 << 15),
+	RT5677_I2S2_SOURCE = (0x1 << 16),
+	RT5677_I2S3_SOURCE = (0x1 << 17),
+	RT5677_I2S4_SOURCE = (0x1 << 18),
 };
 
 struct rt5677_priv {
@@ -1762,6 +1776,7 @@ struct rt5677_priv {
 	int pll_in;
 	int pll_out;
 	int pow_ldo2; /* POW_LDO2 pin */
+	int reset_pin; /* RESET pin */
 	enum rt5677_type type;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip gpio_chip;

sound/soc/codecs/sgtl5000.c

@@ -1090,6 +1090,19 @@ static bool sgtl5000_readable(struct device *dev, unsigned int reg)
 	}
 }
 
+/*
+ * This precalculated table contains all (vag_val * 100 / lo_calcntrl) results
+ * to select an appropriate lo_vol_* in SGTL5000_CHIP_LINE_OUT_VOL
+ * The calculatation was done for all possible register values which
+ * is the array index and the following formula: 10^((idx−15)/40) * 100
+ */
+static const u8 vol_quot_table[] = {
+	42, 45, 47, 50, 53, 56, 60, 63,
+	67, 71, 75, 79, 84, 89, 94, 100,
+	106, 112, 119, 126, 133, 141, 150, 158,
+	168, 178, 188, 200, 211, 224, 237, 251
+};
+
 /*
  * sgtl5000 has 3 internal power supplies:
  * 1. VAG, normally set to vdda/2
@@ -1110,6 +1123,10 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 	u16 ana_pwr;
 	u16 lreg_ctrl;
 	int vag;
+	int lo_vag;
+	int vol_quot;
+	int lo_vol;
+	size_t i;
 	struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
 
 	vdda  = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
@@ -1197,23 +1214,45 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 			SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
 
 	/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
-	vag = vddio / 2;
+	lo_vag = vddio / 2;
-	if (vag <= SGTL5000_LINE_OUT_GND_BASE)
+	if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE)
-		vag = 0;
+		lo_vag = 0;
-	else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
+	else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE +
 		SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
-		vag = SGTL5000_LINE_OUT_GND_MAX;
+		lo_vag = SGTL5000_LINE_OUT_GND_MAX;
 	else
-		vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
+		lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) /
 		    SGTL5000_LINE_OUT_GND_STP;
 
 	snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
 			SGTL5000_LINE_OUT_CURRENT_MASK |
 			SGTL5000_LINE_OUT_GND_MASK,
-			vag << SGTL5000_LINE_OUT_GND_SHIFT |
+			lo_vag << SGTL5000_LINE_OUT_GND_SHIFT |
 			SGTL5000_LINE_OUT_CURRENT_360u <<
 				SGTL5000_LINE_OUT_CURRENT_SHIFT);
 
+	/*
+	 * Set lineout output level in range (0..31)
+	 * the same value is used for right and left channel
+	 *
+	 * Searching for a suitable index solving this formula:
+	 * idx = 40 * log10(vag_val / lo_cagcntrl) + 15
+	 */
+	vol_quot = (vag * 100) / lo_vag;
+	lo_vol = 0;
+	for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) {
+		if (vol_quot >= vol_quot_table[i])
+			lo_vol = i;
+		else
+			break;
+	}
+
+	snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_VOL,
+		SGTL5000_LINE_OUT_VOL_RIGHT_MASK |
+		SGTL5000_LINE_OUT_VOL_LEFT_MASK,
+		lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT |
+		lo_vol << SGTL5000_LINE_OUT_VOL_LEFT_SHIFT);
+
 	return 0;
 }
 

sound/soc/samsung/Kconfig

@@ -174,7 +174,8 @@ config SND_SOC_SMDK_WM8994_PCM
 
 config SND_SOC_SPEYSIDE
 	tristate "Audio support for Wolfson Speyside"
-	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C && SPI_MASTER
+	depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER
+	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8996
 	select SND_SOC_WM9081
@@ -183,13 +184,15 @@ config SND_SOC_SPEYSIDE
 
 config SND_SOC_TOBERMORY
 	tristate "Audio support for Wolfson Tobermory"
-	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && INPUT && I2C
+	depends on SND_SOC_SAMSUNG && INPUT && I2C
+	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8962
 
 config SND_SOC_BELLS
 	tristate "Audio support for Wolfson Bells"
-	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && MFD_ARIZONA && I2C && SPI_MASTER
+	depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM5102
 	select SND_SOC_WM5110
@@ -199,14 +202,16 @@ config SND_SOC_BELLS
 
 config SND_SOC_LOWLAND
 	tristate "Audio support for Wolfson Lowland"
-	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C
+	depends on SND_SOC_SAMSUNG && I2C
+	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM5100
 	select SND_SOC_WM9081
 
 config SND_SOC_LITTLEMILL
 	tristate "Audio support for Wolfson Littlemill"
-	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C
+	depends on SND_SOC_SAMSUNG && I2C
+	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select MFD_WM8994
 	select SND_SOC_WM8994

sound/soc/samsung/i2s.c

@@ -1493,7 +1493,7 @@ static const struct samsung_i2s_dai_data samsung_dai_type_sec = {
 	.dai_type = TYPE_SEC,
 };
 
-static struct platform_device_id samsung_i2s_driver_ids[] = {
+static const struct platform_device_id samsung_i2s_driver_ids[] = {
 	{
 		.name           = "samsung-i2s",
 		.driver_data	= (kernel_ulong_t)&i2sv3_dai_type,

sound/soc/samsung/lowland.c

@@ -72,7 +72,7 @@ static int lowland_wm9081_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_codec *codec = rtd->codec;
 
-	snd_soc_dapm_nc_pin(&codec->dapm, "LINEOUT");
+	snd_soc_dapm_nc_pin(&rtd->card->dapm, "LINEOUT");
 
 	/* At any time the WM9081 is active it will have this clock */
 	return snd_soc_codec_set_sysclk(codec, WM9081_SYSCLK_MCLK, 0,

sound/soc/samsung/smartq_wm8987.c

@@ -137,8 +137,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
 	int err = 0;
 
 	/* set endpoints to not connected */
@@ -147,9 +146,6 @@ static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
 	snd_soc_dapm_nc_pin(dapm, "OUT3");
 	snd_soc_dapm_nc_pin(dapm, "ROUT1");
 
-	/* set endpoints to default off mode */
-	snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
-
 	/* Headphone jack detection */
 	err = snd_soc_card_jack_new(rtd->card, "Headphone Jack",
 				    SND_JACK_HEADPHONE, &smartq_jack,

sound/soc/samsung/smdk_wm8994.c

@@ -86,8 +86,7 @@ static struct snd_soc_ops smdk_ops = {
 
 static int smdk_wm8994_init_paiftx(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
 
 	/* Other pins NC */
 	snd_soc_dapm_nc_pin(dapm, "HPOUT2P");

sound/soc/samsung/speyside.c

@@ -123,7 +123,7 @@ static void speyside_set_polarity(struct snd_soc_codec *codec,
 	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
 
 	/* Re-run DAPM to make sure we're using the correct mic bias */
-	snd_soc_dapm_sync(&codec->dapm);
+	snd_soc_dapm_sync(snd_soc_codec_get_dapm(codec));
 }
 
 static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)