qla2xxx: Fix stale pointer access.

[ Upstream Commit 84e32a06f4 ]

Commit 84e32a0 ("qla2xxx: Use pci_enable_msix_range() instead of
pci_enable_msix()") introduced a regression when target mode is enabled.
In qla24xx_enable_msix(), ha->max_rsp_queues was incorrectly set
to a value higher than the number of response queues allocated causing
an invalid dereference. Specifically here in qla2x00_init_rings():
    *rsp->in_ptr = 0;

Add additional check to make sure the pointer is valid. following
call stack will be seen

---- 8< ----
RIP: 0010:[<ffffffffa02ccadc>]  [<ffffffffa02ccadc>] qla2x00_init_rings+0xdc/0x320 [qla2xxx]
RSP: 0018:ffff880429447dd8  EFLAGS: 00010082
....
Call Trace:
[<ffffffffa02ceb40>] qla2x00_abort_isp+0x170/0x6b0 [qla2xxx]
[<ffffffffa02c6f77>] qla2x00_do_dpc+0x357/0x7f0 [qla2xxx]
[<ffffffffa02c6c20>] ? qla2x00_relogin+0x260/0x260 [qla2xxx]
[<ffffffff8107d2c9>] kthread+0xc9/0xe0
[<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90
[<ffffffff8172cc6f>] ret_from_fork+0x3f/0x70
[<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90
---- 8< ----

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

drivers/scsi/qla2xxx/qla_init.c

@@ -2204,7 +2204,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 	/* Clear outstanding commands array. */
 	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
-		if (!req)
+		if (!req || !test_bit(que, ha->req_qid_map))
 			continue;
 		req->out_ptr = (void *)(req->ring + req->length);
 		*req->out_ptr = 0;
@@ -2221,7 +2221,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 
 	for (que = 0; que < ha->max_rsp_queues; que++) {
 		rsp = ha->rsp_q_map[que];
-		if (!rsp)
+		if (!rsp || !test_bit(que, ha->rsp_qid_map))
 			continue;
 		rsp->in_ptr = (void *)(rsp->ring + rsp->length);
 		*rsp->in_ptr = 0;
@@ -4981,7 +4981,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 
 	for (i = 1; i < ha->max_rsp_queues; i++) {
 		rsp = ha->rsp_q_map[i];
-		if (rsp) {
+		if (rsp && test_bit(i, ha->rsp_qid_map)) {
 			rsp->options &= ~BIT_0;
 			ret = qla25xx_init_rsp_que(base_vha, rsp);
 			if (ret != QLA_SUCCESS)
@@ -4996,7 +4996,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 	}
 	for (i = 1; i < ha->max_req_queues; i++) {
 		req = ha->req_q_map[i];
-		if (req) {
+		if (req && test_bit(i, ha->req_qid_map)) {
 			/* Clear outstanding commands array. */
 			req->options &= ~BIT_0;
 			ret = qla25xx_init_req_que(base_vha, req);

drivers/scsi/qla2xxx/qla_isr.c

@@ -3063,9 +3063,9 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 		    "MSI-X: Failed to enable support "
 		    "-- %d/%d\n Retry with %d vectors.\n",
 		    ha->msix_count, ret, ret);
-	}
 		ha->msix_count = ret;
 		ha->max_rsp_queues = ha->msix_count - 1;
+	}
 	ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
 				ha->msix_count, GFP_KERNEL);
 	if (!ha->msix_entries) {

drivers/scsi/qla2xxx/qla_mid.c

@@ -600,7 +600,7 @@ qla25xx_delete_queues(struct scsi_qla_host *vha)
 	/* Delete request queues */
 	for (cnt = 1; cnt < ha->max_req_queues; cnt++) {
 		req = ha->req_q_map[cnt];
-		if (req) {
+		if (req && test_bit(cnt, ha->req_qid_map)) {
 			ret = qla25xx_delete_req_que(vha, req);
 			if (ret != QLA_SUCCESS) {
 				ql_log(ql_log_warn, vha, 0x00ea,
@@ -614,7 +614,7 @@ qla25xx_delete_queues(struct scsi_qla_host *vha)
 	/* Delete response queues */
 	for (cnt = 1; cnt < ha->max_rsp_queues; cnt++) {
 		rsp = ha->rsp_q_map[cnt];
-		if (rsp) {
+		if (rsp && test_bit(cnt, ha->rsp_qid_map)) {
 			ret = qla25xx_delete_rsp_que(vha, rsp);
 			if (ret != QLA_SUCCESS) {
 				ql_log(ql_log_warn, vha, 0x00eb,

drivers/scsi/qla2xxx/qla_os.c

@@ -409,6 +409,9 @@ static void qla2x00_free_queues(struct qla_hw_data *ha)
 	int cnt;
 
 	for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
+		if (!test_bit(cnt, ha->req_qid_map))
+			continue;
+
 		req = ha->req_q_map[cnt];
 		qla2x00_free_req_que(ha, req);
 	}
@@ -416,6 +419,9 @@ static void qla2x00_free_queues(struct qla_hw_data *ha)
 	ha->req_q_map = NULL;
 
 	for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
+		if (!test_bit(cnt, ha->rsp_qid_map))
+			continue;
+
 		rsp = ha->rsp_q_map[cnt];
 		qla2x00_free_rsp_que(ha, rsp);
 	}

drivers/scsi/qla2xxx/qla_tmpl.c

@@ -395,6 +395,10 @@ qla27xx_fwdt_entry_t263(struct scsi_qla_host *vha,
 	if (ent->t263.queue_type == T263_QUEUE_TYPE_REQ) {
 		for (i = 0; i < vha->hw->max_req_queues; i++) {
 			struct req_que *req = vha->hw->req_q_map[i];
+
+			if (!test_bit(i, vha->hw->req_qid_map))
+				continue;
+
 			if (req || !buf) {
 				length = req ?
 				    req->length : REQUEST_ENTRY_CNT_24XX;
@@ -408,6 +412,10 @@ qla27xx_fwdt_entry_t263(struct scsi_qla_host *vha,
 	} else if (ent->t263.queue_type == T263_QUEUE_TYPE_RSP) {
 		for (i = 0; i < vha->hw->max_rsp_queues; i++) {
 			struct rsp_que *rsp = vha->hw->rsp_q_map[i];
+
+			if (!test_bit(i, vha->hw->rsp_qid_map))
+				continue;
+
 			if (rsp || !buf) {
 				length = rsp ?
 				    rsp->length : RESPONSE_ENTRY_CNT_MQ;
@@ -634,6 +642,10 @@ qla27xx_fwdt_entry_t274(struct scsi_qla_host *vha,
 	if (ent->t274.queue_type == T274_QUEUE_TYPE_REQ_SHAD) {
 		for (i = 0; i < vha->hw->max_req_queues; i++) {
 			struct req_que *req = vha->hw->req_q_map[i];
+
+			if (!test_bit(i, vha->hw->req_qid_map))
+				continue;
+
 			if (req || !buf) {
 				qla27xx_insert16(i, buf, len);
 				qla27xx_insert16(1, buf, len);
@@ -645,6 +657,10 @@ qla27xx_fwdt_entry_t274(struct scsi_qla_host *vha,
 	} else if (ent->t274.queue_type == T274_QUEUE_TYPE_RSP_SHAD) {
 		for (i = 0; i < vha->hw->max_rsp_queues; i++) {
 			struct rsp_que *rsp = vha->hw->rsp_q_map[i];
+
+			if (!test_bit(i, vha->hw->rsp_qid_map))
+				continue;
+
 			if (rsp || !buf) {
 				qla27xx_insert16(i, buf, len);
 				qla27xx_insert16(1, buf, len);