forked from Minki/linux
spi: reorganize drivers
Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.
This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.
v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
be the predominant pattern for subsystem prefixes.
- Clean up filenames in Kconfig and header comment blocks
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Grant Likely
parent
8c99268431
commit
ca632f5566
@ -86,9 +86,6 @@ config SPI_BFIN_SPORT
|
||||
help
|
||||
Enable support for a SPI bus via the Blackfin SPORT peripheral.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called spi_bfin_sport.
|
||||
|
||||
config SPI_AU1550
|
||||
tristate "Au1550/Au12x0 SPI Controller"
|
||||
depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
|
||||
@ -97,9 +94,6 @@ config SPI_AU1550
|
||||
If you say yes to this option, support will be included for the
|
||||
Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called au1550_spi.
|
||||
|
||||
config SPI_BITBANG
|
||||
tristate "Utilities for Bitbanging SPI masters"
|
||||
help
|
||||
@ -130,9 +124,6 @@ config SPI_COLDFIRE_QSPI
|
||||
This enables support for the Coldfire QSPI controller in master
|
||||
mode.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called coldfire_qspi.
|
||||
|
||||
config SPI_DAVINCI
|
||||
tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
|
||||
depends on SPI_MASTER && ARCH_DAVINCI
|
||||
@ -140,9 +131,6 @@ config SPI_DAVINCI
|
||||
help
|
||||
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
|
||||
|
||||
This driver can also be built as a module. The module will be called
|
||||
davinci_spi.
|
||||
|
||||
config SPI_EP93XX
|
||||
tristate "Cirrus Logic EP93xx SPI controller"
|
||||
depends on ARCH_EP93XX
|
||||
@ -150,9 +138,6 @@ config SPI_EP93XX
|
||||
This enables using the Cirrus EP93xx SPI controller in master
|
||||
mode.
|
||||
|
||||
To compile this driver as a module, choose M here. The module will be
|
||||
called ep93xx_spi.
|
||||
|
||||
config SPI_GPIO
|
||||
tristate "GPIO-based bitbanging SPI Master"
|
||||
depends on GENERIC_GPIO
|
||||
@ -385,9 +370,6 @@ config SPI_TI_SSP
|
||||
This selects an SPI master implementation using a TI sequencer
|
||||
serial port.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called ti-ssp-spi.
|
||||
|
||||
config SPI_TOPCLIFF_PCH
|
||||
tristate "Topcliff PCH SPI Controller"
|
||||
depends on PCI
|
||||
|
||||
@ -7,68 +7,56 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
|
||||
# small core, mostly translating board-specific
|
||||
# config declarations into driver model code
|
||||
obj-$(CONFIG_SPI_MASTER) += spi.o
|
||||
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
|
||||
|
||||
# SPI master controller drivers (bus)
|
||||
obj-$(CONFIG_SPI_ALTERA) += spi_altera.o
|
||||
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
|
||||
obj-$(CONFIG_SPI_ATH79) += ath79_spi.o
|
||||
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
|
||||
obj-$(CONFIG_SPI_BFIN_SPORT) += spi_bfin_sport.o
|
||||
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
|
||||
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
|
||||
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
|
||||
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o
|
||||
obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o
|
||||
obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o
|
||||
obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o
|
||||
dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o
|
||||
obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o
|
||||
obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o
|
||||
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
|
||||
obj-$(CONFIG_SPI_IMX) += spi_imx.o
|
||||
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
|
||||
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
|
||||
obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o
|
||||
obj-$(CONFIG_SPI_OC_TINY) += spi_oc_tiny.o
|
||||
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
|
||||
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
|
||||
obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o
|
||||
obj-$(CONFIG_SPI_ORION) += orion_spi.o
|
||||
obj-$(CONFIG_SPI_PL022) += amba-pl022.o
|
||||
obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o
|
||||
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
|
||||
obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o
|
||||
obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o
|
||||
obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o
|
||||
obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o
|
||||
obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
|
||||
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
|
||||
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o
|
||||
obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o
|
||||
obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o
|
||||
obj-$(CONFIG_SPI_TI_SSP) += ti-ssp-spi.o
|
||||
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o
|
||||
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
|
||||
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
|
||||
obj-$(CONFIG_SPI_SH) += spi_sh.o
|
||||
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
|
||||
obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
|
||||
obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
|
||||
obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
|
||||
obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
|
||||
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
|
||||
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
|
||||
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
|
||||
obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
|
||||
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
|
||||
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
|
||||
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
|
||||
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
|
||||
obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
|
||||
obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o
|
||||
obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
|
||||
obj-$(CONFIG_SPI_DW_PCI) += spi-dw-midpci.o
|
||||
spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o
|
||||
obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
|
||||
obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o
|
||||
obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
|
||||
obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
|
||||
obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
|
||||
obj-$(CONFIG_SPI_IMX) += spi-imx.o
|
||||
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
|
||||
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
|
||||
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
|
||||
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
|
||||
obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
|
||||
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
|
||||
obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o
|
||||
obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o
|
||||
obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o
|
||||
obj-$(CONFIG_SPI_ORION) += spi-orion.o
|
||||
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
|
||||
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
|
||||
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
|
||||
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
|
||||
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi-s3c24xx-gpio.o
|
||||
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
|
||||
spi-s3c24xx-hw-y := spi-s3c24xx.o
|
||||
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
|
||||
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
|
||||
obj-$(CONFIG_SPI_SH) += spi-sh.o
|
||||
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
|
||||
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
|
||||
obj-$(CONFIG_SPI_STMP3XXX) += spi-stmp.o
|
||||
obj-$(CONFIG_SPI_TEGRA) += spi-tegra.o
|
||||
obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o
|
||||
obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
|
||||
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
|
||||
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
|
||||
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
|
||||
|
||||
# special build for s3c24xx spi driver with fiq support
|
||||
spi_s3c24xx_hw-y := spi_s3c24xx.o
|
||||
spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o
|
||||
|
||||
# ... add above this line ...
|
||||
|
||||
# SPI protocol drivers (device/link on bus)
|
||||
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
|
||||
obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
|
||||
# ... add above this line ...
|
||||
|
||||
# SPI slave controller drivers (upstream link)
|
||||
# ... add above this line ...
|
||||
|
||||
# SPI slave drivers (protocol for that link)
|
||||
# ... add above this line ...
|
||||
|
||||
@ -1,167 +0,0 @@
|
||||
/*
|
||||
* Register definitions for Atmel Serial Peripheral Interface (SPI)
|
||||
*
|
||||
* Copyright (C) 2006 Atmel Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#ifndef __ATMEL_SPI_H__
|
||||
#define __ATMEL_SPI_H__
|
||||
|
||||
/* SPI register offsets */
|
||||
#define SPI_CR 0x0000
|
||||
#define SPI_MR 0x0004
|
||||
#define SPI_RDR 0x0008
|
||||
#define SPI_TDR 0x000c
|
||||
#define SPI_SR 0x0010
|
||||
#define SPI_IER 0x0014
|
||||
#define SPI_IDR 0x0018
|
||||
#define SPI_IMR 0x001c
|
||||
#define SPI_CSR0 0x0030
|
||||
#define SPI_CSR1 0x0034
|
||||
#define SPI_CSR2 0x0038
|
||||
#define SPI_CSR3 0x003c
|
||||
#define SPI_RPR 0x0100
|
||||
#define SPI_RCR 0x0104
|
||||
#define SPI_TPR 0x0108
|
||||
#define SPI_TCR 0x010c
|
||||
#define SPI_RNPR 0x0110
|
||||
#define SPI_RNCR 0x0114
|
||||
#define SPI_TNPR 0x0118
|
||||
#define SPI_TNCR 0x011c
|
||||
#define SPI_PTCR 0x0120
|
||||
#define SPI_PTSR 0x0124
|
||||
|
||||
/* Bitfields in CR */
|
||||
#define SPI_SPIEN_OFFSET 0
|
||||
#define SPI_SPIEN_SIZE 1
|
||||
#define SPI_SPIDIS_OFFSET 1
|
||||
#define SPI_SPIDIS_SIZE 1
|
||||
#define SPI_SWRST_OFFSET 7
|
||||
#define SPI_SWRST_SIZE 1
|
||||
#define SPI_LASTXFER_OFFSET 24
|
||||
#define SPI_LASTXFER_SIZE 1
|
||||
|
||||
/* Bitfields in MR */
|
||||
#define SPI_MSTR_OFFSET 0
|
||||
#define SPI_MSTR_SIZE 1
|
||||
#define SPI_PS_OFFSET 1
|
||||
#define SPI_PS_SIZE 1
|
||||
#define SPI_PCSDEC_OFFSET 2
|
||||
#define SPI_PCSDEC_SIZE 1
|
||||
#define SPI_FDIV_OFFSET 3
|
||||
#define SPI_FDIV_SIZE 1
|
||||
#define SPI_MODFDIS_OFFSET 4
|
||||
#define SPI_MODFDIS_SIZE 1
|
||||
#define SPI_LLB_OFFSET 7
|
||||
#define SPI_LLB_SIZE 1
|
||||
#define SPI_PCS_OFFSET 16
|
||||
#define SPI_PCS_SIZE 4
|
||||
#define SPI_DLYBCS_OFFSET 24
|
||||
#define SPI_DLYBCS_SIZE 8
|
||||
|
||||
/* Bitfields in RDR */
|
||||
#define SPI_RD_OFFSET 0
|
||||
#define SPI_RD_SIZE 16
|
||||
|
||||
/* Bitfields in TDR */
|
||||
#define SPI_TD_OFFSET 0
|
||||
#define SPI_TD_SIZE 16
|
||||
|
||||
/* Bitfields in SR */
|
||||
#define SPI_RDRF_OFFSET 0
|
||||
#define SPI_RDRF_SIZE 1
|
||||
#define SPI_TDRE_OFFSET 1
|
||||
#define SPI_TDRE_SIZE 1
|
||||
#define SPI_MODF_OFFSET 2
|
||||
#define SPI_MODF_SIZE 1
|
||||
#define SPI_OVRES_OFFSET 3
|
||||
#define SPI_OVRES_SIZE 1
|
||||
#define SPI_ENDRX_OFFSET 4
|
||||
#define SPI_ENDRX_SIZE 1
|
||||
#define SPI_ENDTX_OFFSET 5
|
||||
#define SPI_ENDTX_SIZE 1
|
||||
#define SPI_RXBUFF_OFFSET 6
|
||||
#define SPI_RXBUFF_SIZE 1
|
||||
#define SPI_TXBUFE_OFFSET 7
|
||||
#define SPI_TXBUFE_SIZE 1
|
||||
#define SPI_NSSR_OFFSET 8
|
||||
#define SPI_NSSR_SIZE 1
|
||||
#define SPI_TXEMPTY_OFFSET 9
|
||||
#define SPI_TXEMPTY_SIZE 1
|
||||
#define SPI_SPIENS_OFFSET 16
|
||||
#define SPI_SPIENS_SIZE 1
|
||||
|
||||
/* Bitfields in CSR0 */
|
||||
#define SPI_CPOL_OFFSET 0
|
||||
#define SPI_CPOL_SIZE 1
|
||||
#define SPI_NCPHA_OFFSET 1
|
||||
#define SPI_NCPHA_SIZE 1
|
||||
#define SPI_CSAAT_OFFSET 3
|
||||
#define SPI_CSAAT_SIZE 1
|
||||
#define SPI_BITS_OFFSET 4
|
||||
#define SPI_BITS_SIZE 4
|
||||
#define SPI_SCBR_OFFSET 8
|
||||
#define SPI_SCBR_SIZE 8
|
||||
#define SPI_DLYBS_OFFSET 16
|
||||
#define SPI_DLYBS_SIZE 8
|
||||
#define SPI_DLYBCT_OFFSET 24
|
||||
#define SPI_DLYBCT_SIZE 8
|
||||
|
||||
/* Bitfields in RCR */
|
||||
#define SPI_RXCTR_OFFSET 0
|
||||
#define SPI_RXCTR_SIZE 16
|
||||
|
||||
/* Bitfields in TCR */
|
||||
#define SPI_TXCTR_OFFSET 0
|
||||
#define SPI_TXCTR_SIZE 16
|
||||
|
||||
/* Bitfields in RNCR */
|
||||
#define SPI_RXNCR_OFFSET 0
|
||||
#define SPI_RXNCR_SIZE 16
|
||||
|
||||
/* Bitfields in TNCR */
|
||||
#define SPI_TXNCR_OFFSET 0
|
||||
#define SPI_TXNCR_SIZE 16
|
||||
|
||||
/* Bitfields in PTCR */
|
||||
#define SPI_RXTEN_OFFSET 0
|
||||
#define SPI_RXTEN_SIZE 1
|
||||
#define SPI_RXTDIS_OFFSET 1
|
||||
#define SPI_RXTDIS_SIZE 1
|
||||
#define SPI_TXTEN_OFFSET 8
|
||||
#define SPI_TXTEN_SIZE 1
|
||||
#define SPI_TXTDIS_OFFSET 9
|
||||
#define SPI_TXTDIS_SIZE 1
|
||||
|
||||
/* Constants for BITS */
|
||||
#define SPI_BITS_8_BPT 0
|
||||
#define SPI_BITS_9_BPT 1
|
||||
#define SPI_BITS_10_BPT 2
|
||||
#define SPI_BITS_11_BPT 3
|
||||
#define SPI_BITS_12_BPT 4
|
||||
#define SPI_BITS_13_BPT 5
|
||||
#define SPI_BITS_14_BPT 6
|
||||
#define SPI_BITS_15_BPT 7
|
||||
#define SPI_BITS_16_BPT 8
|
||||
|
||||
/* Bit manipulation macros */
|
||||
#define SPI_BIT(name) \
|
||||
(1 << SPI_##name##_OFFSET)
|
||||
#define SPI_BF(name,value) \
|
||||
(((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
|
||||
#define SPI_BFEXT(name,value) \
|
||||
(((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
|
||||
#define SPI_BFINS(name,value,old) \
|
||||
( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
|
||||
| SPI_BF(name,value))
|
||||
|
||||
/* Register access macros */
|
||||
#define spi_readl(port,reg) \
|
||||
__raw_readl((port)->regs + SPI_##reg)
|
||||
#define spi_writel(port,reg,value) \
|
||||
__raw_writel((value), (port)->regs + SPI_##reg)
|
||||
|
||||
#endif /* __ATMEL_SPI_H__ */
|
||||
@ -25,7 +25,160 @@
|
||||
#include <mach/gpio.h>
|
||||
#include <mach/cpu.h>
|
||||
|
||||
#include "atmel_spi.h"
|
||||
/* SPI register offsets */
|
||||
#define SPI_CR 0x0000
|
||||
#define SPI_MR 0x0004
|
||||
#define SPI_RDR 0x0008
|
||||
#define SPI_TDR 0x000c
|
||||
#define SPI_SR 0x0010
|
||||
#define SPI_IER 0x0014
|
||||
#define SPI_IDR 0x0018
|
||||
#define SPI_IMR 0x001c
|
||||
#define SPI_CSR0 0x0030
|
||||
#define SPI_CSR1 0x0034
|
||||
#define SPI_CSR2 0x0038
|
||||
#define SPI_CSR3 0x003c
|
||||
#define SPI_RPR 0x0100
|
||||
#define SPI_RCR 0x0104
|
||||
#define SPI_TPR 0x0108
|
||||
#define SPI_TCR 0x010c
|
||||
#define SPI_RNPR 0x0110
|
||||
#define SPI_RNCR 0x0114
|
||||
#define SPI_TNPR 0x0118
|
||||
#define SPI_TNCR 0x011c
|
||||
#define SPI_PTCR 0x0120
|
||||
#define SPI_PTSR 0x0124
|
||||
|
||||
/* Bitfields in CR */
|
||||
#define SPI_SPIEN_OFFSET 0
|
||||
#define SPI_SPIEN_SIZE 1
|
||||
#define SPI_SPIDIS_OFFSET 1
|
||||
#define SPI_SPIDIS_SIZE 1
|
||||
#define SPI_SWRST_OFFSET 7
|
||||
#define SPI_SWRST_SIZE 1
|
||||
#define SPI_LASTXFER_OFFSET 24
|
||||
#define SPI_LASTXFER_SIZE 1
|
||||
|
||||
/* Bitfields in MR */
|
||||
#define SPI_MSTR_OFFSET 0
|
||||
#define SPI_MSTR_SIZE 1
|
||||
#define SPI_PS_OFFSET 1
|
||||
#define SPI_PS_SIZE 1
|
||||
#define SPI_PCSDEC_OFFSET 2
|
||||
#define SPI_PCSDEC_SIZE 1
|
||||
#define SPI_FDIV_OFFSET 3
|
||||
#define SPI_FDIV_SIZE 1
|
||||
#define SPI_MODFDIS_OFFSET 4
|
||||
#define SPI_MODFDIS_SIZE 1
|
||||
#define SPI_LLB_OFFSET 7
|
||||
#define SPI_LLB_SIZE 1
|
||||
#define SPI_PCS_OFFSET 16
|
||||
#define SPI_PCS_SIZE 4
|
||||
#define SPI_DLYBCS_OFFSET 24
|
||||
#define SPI_DLYBCS_SIZE 8
|
||||
|
||||
/* Bitfields in RDR */
|
||||
#define SPI_RD_OFFSET 0
|
||||
#define SPI_RD_SIZE 16
|
||||
|
||||
/* Bitfields in TDR */
|
||||
#define SPI_TD_OFFSET 0
|
||||
#define SPI_TD_SIZE 16
|
||||
|
||||
/* Bitfields in SR */
|
||||
#define SPI_RDRF_OFFSET 0
|
||||
#define SPI_RDRF_SIZE 1
|
||||
#define SPI_TDRE_OFFSET 1
|
||||
#define SPI_TDRE_SIZE 1
|
||||
#define SPI_MODF_OFFSET 2
|
||||
#define SPI_MODF_SIZE 1
|
||||
#define SPI_OVRES_OFFSET 3
|
||||
#define SPI_OVRES_SIZE 1
|
||||
#define SPI_ENDRX_OFFSET 4
|
||||
#define SPI_ENDRX_SIZE 1
|
||||
#define SPI_ENDTX_OFFSET 5
|
||||
#define SPI_ENDTX_SIZE 1
|
||||
#define SPI_RXBUFF_OFFSET 6
|
||||
#define SPI_RXBUFF_SIZE 1
|
||||
#define SPI_TXBUFE_OFFSET 7
|
||||
#define SPI_TXBUFE_SIZE 1
|
||||
#define SPI_NSSR_OFFSET 8
|
||||
#define SPI_NSSR_SIZE 1
|
||||
#define SPI_TXEMPTY_OFFSET 9
|
||||
#define SPI_TXEMPTY_SIZE 1
|
||||
#define SPI_SPIENS_OFFSET 16
|
||||
#define SPI_SPIENS_SIZE 1
|
||||
|
||||
/* Bitfields in CSR0 */
|
||||
#define SPI_CPOL_OFFSET 0
|
||||
#define SPI_CPOL_SIZE 1
|
||||
#define SPI_NCPHA_OFFSET 1
|
||||
#define SPI_NCPHA_SIZE 1
|
||||
#define SPI_CSAAT_OFFSET 3
|
||||
#define SPI_CSAAT_SIZE 1
|
||||
#define SPI_BITS_OFFSET 4
|
||||
#define SPI_BITS_SIZE 4
|
||||
#define SPI_SCBR_OFFSET 8
|
||||
#define SPI_SCBR_SIZE 8
|
||||
#define SPI_DLYBS_OFFSET 16
|
||||
#define SPI_DLYBS_SIZE 8
|
||||
#define SPI_DLYBCT_OFFSET 24
|
||||
#define SPI_DLYBCT_SIZE 8
|
||||
|
||||
/* Bitfields in RCR */
|
||||
#define SPI_RXCTR_OFFSET 0
|
||||
#define SPI_RXCTR_SIZE 16
|
||||
|
||||
/* Bitfields in TCR */
|
||||
#define SPI_TXCTR_OFFSET 0
|
||||
#define SPI_TXCTR_SIZE 16
|
||||
|
||||
/* Bitfields in RNCR */
|
||||
#define SPI_RXNCR_OFFSET 0
|
||||
#define SPI_RXNCR_SIZE 16
|
||||
|
||||
/* Bitfields in TNCR */
|
||||
#define SPI_TXNCR_OFFSET 0
|
||||
#define SPI_TXNCR_SIZE 16
|
||||
|
||||
/* Bitfields in PTCR */
|
||||
#define SPI_RXTEN_OFFSET 0
|
||||
#define SPI_RXTEN_SIZE 1
|
||||
#define SPI_RXTDIS_OFFSET 1
|
||||
#define SPI_RXTDIS_SIZE 1
|
||||
#define SPI_TXTEN_OFFSET 8
|
||||
#define SPI_TXTEN_SIZE 1
|
||||
#define SPI_TXTDIS_OFFSET 9
|
||||
#define SPI_TXTDIS_SIZE 1
|
||||
|
||||
/* Constants for BITS */
|
||||
#define SPI_BITS_8_BPT 0
|
||||
#define SPI_BITS_9_BPT 1
|
||||
#define SPI_BITS_10_BPT 2
|
||||
#define SPI_BITS_11_BPT 3
|
||||
#define SPI_BITS_12_BPT 4
|
||||
#define SPI_BITS_13_BPT 5
|
||||
#define SPI_BITS_14_BPT 6
|
||||
#define SPI_BITS_15_BPT 7
|
||||
#define SPI_BITS_16_BPT 8
|
||||
|
||||
/* Bit manipulation macros */
|
||||
#define SPI_BIT(name) \
|
||||
(1 << SPI_##name##_OFFSET)
|
||||
#define SPI_BF(name,value) \
|
||||
(((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
|
||||
#define SPI_BFEXT(name,value) \
|
||||
(((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
|
||||
#define SPI_BFINS(name,value,old) \
|
||||
( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
|
||||
| SPI_BF(name,value))
|
||||
|
||||
/* Register access macros */
|
||||
#define spi_readl(port,reg) \
|
||||
__raw_readl((port)->regs + SPI_##reg)
|
||||
#define spi_writel(port,reg,value) \
|
||||
__raw_writel((value), (port)->regs + SPI_##reg)
|
||||
|
||||
|
||||
/*
|
||||
* The core SPI transfer engine just talks to a register bank to set up
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* au1550_spi.c - au1550 psc spi controller driver
|
||||
* au1550 psc spi controller driver
|
||||
* may work also with au1200, au1210, au1250
|
||||
* will not work on au1000, au1100 and au1500 (no full spi controller there)
|
||||
*
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* spi_bitbang.c - polling/bitbanging SPI master controller driver utilities
|
||||
* polling/bitbanging SPI master controller driver utilities
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* spi_butterfly.c - parport-to-butterfly adapter
|
||||
* parport-to-butterfly adapter
|
||||
*
|
||||
* Copyright (C) 2005 David Brownell
|
||||
*
|
||||
@ -149,7 +149,7 @@ static void butterfly_chipselect(struct spi_device *spi, int value)
|
||||
#define spidelay(X) do{}while(0)
|
||||
//#define spidelay ndelay
|
||||
|
||||
#include "spi_bitbang_txrx.h"
|
||||
#include "spi-bitbang-txrx.h"
|
||||
|
||||
static u32
|
||||
butterfly_txrx_word_mode0(struct spi_device *spi,
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* dw_spi_mid.c - special handling for DW core on Intel MID platform
|
||||
* Special handling for DW core on Intel MID platform
|
||||
*
|
||||
* Copyright (c) 2009, Intel Corporation.
|
||||
*
|
||||
@ -23,7 +23,7 @@
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include "dw_spi.h"
|
||||
#include "spi-dw.h"
|
||||
|
||||
#ifdef CONFIG_SPI_DW_MID_DMA
|
||||
#include <linux/intel_mid_dma.h>
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* dw_spi_mmio.c - Memory-mapped interface driver for DW SPI Core
|
||||
* Memory-mapped interface driver for DW SPI Core
|
||||
*
|
||||
* Copyright (c) 2010, Octasic semiconductor.
|
||||
*
|
||||
@ -16,7 +16,7 @@
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/scatterlist.h>
|
||||
|
||||
#include "dw_spi.h"
|
||||
#include "spi-dw.h"
|
||||
|
||||
#define DRIVER_NAME "dw_spi_mmio"
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* dw_spi_pci.c - PCI interface driver for DW SPI Core
|
||||
* PCI interface driver for DW SPI Core
|
||||
*
|
||||
* Copyright (c) 2009, Intel Corporation.
|
||||
*
|
||||
@ -22,7 +22,7 @@
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include "dw_spi.h"
|
||||
#include "spi-dw.h"
|
||||
|
||||
#define DRIVER_NAME "dw_spi_pci"
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c)
|
||||
* Designware SPI core controller driver (refer pxa2xx_spi.c)
|
||||
*
|
||||
* Copyright (c) 2009, Intel Corporation.
|
||||
*
|
||||
@ -24,7 +24,7 @@
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include "dw_spi.h"
|
||||
#include "spi-dw.h"
|
||||
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
#include <linux/debugfs.h>
|
||||
@ -22,7 +22,7 @@
|
||||
#include <linux/err.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
|
||||
#include "spi_fsl_lib.h"
|
||||
#include "spi-fsl-lib.h"
|
||||
|
||||
/* eSPI Controller registers */
|
||||
struct fsl_espi_reg {
|
||||
@ -25,7 +25,7 @@
|
||||
#include <linux/of_spi.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
|
||||
#include "spi_fsl_lib.h"
|
||||
#include "spi-fsl-lib.h"
|
||||
|
||||
#define MPC8XXX_SPI_RX_BUF(type) \
|
||||
void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \
|
||||
@ -37,7 +37,7 @@
|
||||
#include <asm/cpm.h>
|
||||
#include <asm/qe.h>
|
||||
|
||||
#include "spi_fsl_lib.h"
|
||||
#include "spi-fsl-lib.h"
|
||||
|
||||
/* CPM1 and CPM2 are mutually exclusive. */
|
||||
#ifdef CONFIG_CPM1
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* spi_gpio.c - SPI master driver using generic bitbanged GPIO
|
||||
* SPI master driver using generic bitbanged GPIO
|
||||
*
|
||||
* Copyright (C) 2006,2008 David Brownell
|
||||
*
|
||||
@ -69,7 +69,7 @@ struct spi_gpio {
|
||||
* #define SPI_MOSI_GPIO 120
|
||||
* #define SPI_SCK_GPIO 121
|
||||
* #define SPI_N_CHIPSEL 4
|
||||
* #include "spi_gpio.c"
|
||||
* #include "spi-gpio.c"
|
||||
*/
|
||||
|
||||
#ifndef DRIVER_NAME
|
||||
@ -127,7 +127,7 @@ static inline int getmiso(const struct spi_device *spi)
|
||||
*/
|
||||
#define spidelay(nsecs) do {} while (0)
|
||||
|
||||
#include "spi_bitbang_txrx.h"
|
||||
#include "spi-bitbang-txrx.h"
|
||||
|
||||
/*
|
||||
* These functions can leverage inline expansion of GPIO calls to shrink
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* spi_lm70llp.c - driver for LM70EVAL-LLP board for the LM70 sensor
|
||||
* Driver for LM70EVAL-LLP board for the LM70 sensor
|
||||
*
|
||||
* Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
|
||||
*
|
||||
@ -174,7 +174,7 @@ static inline int getmiso(struct spi_device *s)
|
||||
}
|
||||
/*--------------------------------------------------------------------*/
|
||||
|
||||
#include "spi_bitbang_txrx.h"
|
||||
#include "spi-bitbang-txrx.h"
|
||||
|
||||
static void lm70_chipselect(struct spi_device *spi, int value)
|
||||
{
|
||||
@ -1,5 +1,4 @@
|
||||
/* linux/drivers/spi/spi_nuc900.c
|
||||
*
|
||||
/*
|
||||
* Copyright (c) 2009 Nuvoton technology.
|
||||
* Wan ZongShun <mcuos.com@gmail.com>
|
||||
*
|
||||
@ -7,7 +6,7 @@
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/spinlock.h>
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* omap_uwire.c -- MicroWire interface driver for OMAP
|
||||
* MicroWire interface driver for OMAP
|
||||
*
|
||||
* Copyright 2003 MontaVista Software Inc. <source@mvista.com>
|
||||
*
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* orion_spi.c -- Marvell Orion SPI controller driver
|
||||
* Marvell Orion SPI controller driver
|
||||
*
|
||||
* Author: Shadi Ammouri <shadi@marvell.com>
|
||||
* Copyright (C) 2007-2008 Marvell Ltd.
|
||||
@ -1,6 +1,4 @@
|
||||
/*
|
||||
* drivers/spi/amba-pl022.c
|
||||
*
|
||||
* A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
|
||||
*
|
||||
* Copyright (C) 2008-2009 ST-Ericsson AB
|
||||
@ -17,7 +17,7 @@
|
||||
#include <mach/regs-irq.h>
|
||||
#include <plat/regs-spi.h>
|
||||
|
||||
#include "spi_s3c24xx_fiq.h"
|
||||
#include "spi-s3c24xx-fiq.h"
|
||||
|
||||
.text
|
||||
|
||||
@ -1,5 +1,4 @@
|
||||
/* linux/drivers/spi/spi_s3c24xx_gpio.c
|
||||
*
|
||||
/*
|
||||
* Copyright (c) 2006 Ben Dooks
|
||||
* Copyright (c) 2006 Simtec Electronics
|
||||
*
|
||||
@ -58,7 +57,7 @@ static inline u32 getmiso(struct spi_device *dev)
|
||||
|
||||
#define spidelay(x) ndelay(x)
|
||||
|
||||
#include "spi_bitbang_txrx.h"
|
||||
#include "spi-bitbang-txrx.h"
|
||||
|
||||
|
||||
static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
|
||||
@ -1,5 +1,4 @@
|
||||
/* linux/drivers/spi/spi_s3c24xx.c
|
||||
*
|
||||
/*
|
||||
* Copyright (c) 2006 Ben Dooks
|
||||
* Copyright 2006-2009 Simtec Electronics
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
@ -32,7 +31,7 @@
|
||||
#include <plat/fiq.h>
|
||||
#include <asm/fiq.h>
|
||||
|
||||
#include "spi_s3c24xx_fiq.h"
|
||||
#include "spi-s3c24xx-fiq.h"
|
||||
|
||||
/**
|
||||
* s3c24xx_spi_devstate - per device data
|
||||
@ -1,5 +1,4 @@
|
||||
/* linux/drivers/spi/spi_s3c64xx.c
|
||||
*
|
||||
/*
|
||||
* Copyright (C) 2009 Samsung Electronics Ltd.
|
||||
* Jaswinder Singh <jassi.brar@samsung.com>
|
||||
*
|
||||
@ -78,7 +78,7 @@ static inline u32 getmiso(struct spi_device *dev)
|
||||
|
||||
#define spidelay(x) ndelay(x)
|
||||
|
||||
#include "spi_bitbang_txrx.h"
|
||||
#include "spi-bitbang-txrx.h"
|
||||
|
||||
static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
|
||||
unsigned nsecs, u32 word, u8 bits)
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* tle62x0.c -- support Infineon TLE62x0 driver chips
|
||||
* Support Infineon TLE62x0 driver chips
|
||||
*
|
||||
* Copyright (c) 2007 Simtec Electronics
|
||||
* Ben Dooks, <ben@simtec.co.uk>
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* spi_txx9.c - TXx9 SPI controller driver.
|
||||
* TXx9 SPI controller driver.
|
||||
*
|
||||
* Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
|
||||
* Copyright (C) 2000-2001 Toshiba Corporation
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* spi.c - SPI init/core code
|
||||
* SPI init/core code
|
||||
*
|
||||
* Copyright (C) 2005 David Brownell
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* spidev.c -- simple synchronous userspace interface to SPI devices
|
||||
* Simple synchronous userspace interface to SPI devices
|
||||
*
|
||||
* Copyright (C) 2006 SWAPP
|
||||
* Andrea Paterniani <a.paterniani@swapp-eng.it>
|
||||
|
||||
Loading…
Reference in New Issue
Block a user