leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"

Browse Source 
Fixed code indent tabs in respective imx6qdl dtsi files and
also add space on imx6qdl-icore-rqs.dtsi on usdhc bus-width nodes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Jagan Teki 2017-01-20 00:09:33 +01:00 committed by Shawn Guo
parent 8fe1764ea8
commit ca38f9cb76
4 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View File

@ -235,7 +235,7 @@
/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
reg_1p8v: sw2 {
regulator-name = "vdd1p8";
regulator-name = "vdd1p8";
regulator-min-microvolt = <1033310>;
regulator-max-microvolt = <2004000>;
lltc,fb-voltage-divider = <301000 200000>;

2
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View File

@ -227,7 +227,7 @@
/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
reg_1p8v: sw2 {
regulator-name = "vdd1p8";
regulator-name = "vdd1p8";
regulator-min-microvolt = <1033310>;
regulator-max-microvolt = <2004000>;
lltc,fb-voltage-divider = <301000 200000>;

2
arch/arm/boot/dts/imx6qdl-gw552x.dtsi
View File

@ -162,7 +162,7 @@
/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
reg_1p8v: sw2 {
regulator-name = "vdd1p8";
regulator-name = "vdd1p8";
regulator-min-microvolt = <1033310>;
regulator-max-microvolt = <2004000>;
lltc,fb-voltage-divider = <301000 200000>;

4
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
View File

@ -223,7 +223,7 @@
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
vmcc-supply = <&reg_sd3_vmmc>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
bus-witdh=<4>;
bus-witdh = <4>;
no-1-8-v;
status = "okay";
};
@ -234,7 +234,7 @@
pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
vmcc-supply = <&reg_sd4_vmmc>;
bus-witdh=<8>;
bus-witdh = <8>;
no-1-8-v;
non-removable;
status = "okay";