Staging: comedi: Fix checkpatch.pl issues in file s526.c

This patch fixes the following issues in s526.c:

WARNING: printk() should include KERN_ facility level
WARNING: line over 80 characters
ERROR: do not use C99 // comments
WARNING: space prohibited between function name and open parenthesis '('
WARNING: braces {} are not necessary for any arm of this statement
WARNING: suspect code indent for conditional statements (16, 16)

Signed-off-by: Xenofon Foukas <foukas.xenofon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Xenofon Foukas 2010-12-15 19:44:20 +02:00 committed by Greg Kroah-Hartman
parent 3555a4c35e
commit c9c62f4e2c

View File

@ -114,7 +114,7 @@ static const int s526_ports[] = {
};
struct counter_mode_register_t {
#if defined (__LITTLE_ENDIAN_BITFIELD)
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned short coutSource:1;
unsigned short coutPolarity:1;
unsigned short autoLoadResetRcap:3;
@ -207,7 +207,9 @@ static const struct s526_board s526_boards[] = {
/* this structure is for data unique to this hardware driver. If
several hardware drivers keep similar information in this structure,
feel free to suggest moving the variable to the struct comedi_device struct. */
feel free to suggest moving the variable to the struct comedi_device
struct.
*/
struct s526_private {
int data;
@ -304,7 +306,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* int subdev_channel = 0; */
union cmReg cmReg;
printk("comedi%d: s526: ", dev->minor);
printk(KERN_INFO "comedi%d: s526: ", dev->minor);
iobase = it->options[0];
if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) {
@ -317,7 +319,8 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/*** make it a little quieter, exw, 8/29/06
for (i = 0; i < S526_NUM_PORTS; i++) {
printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]),
inw(ADDR_REG(s526_ports[i])));
}
***/
@ -402,7 +405,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
s->type = COMEDI_SUBD_UNUSED;
}
printk("attached\n");
printk(KERN_INFO "attached\n");
return 1;
@ -411,7 +414,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* One-shot (software trigger) */
cmReg.reg.coutSource = 0; /* out RCAP */
cmReg.reg.coutPolarity = 1; /* Polarity inverted */
cmReg.reg.autoLoadResetRcap = 1; /* Auto load 0:disabled, 1:enabled */
cmReg.reg.autoLoadResetRcap = 1;/* Auto load 0:disabled, 1:enabled */
cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */
cmReg.reg.ctEnableCtrl = 2; /* Hardware */
cmReg.reg.clockSource = 2; /* Internal */
@ -426,10 +429,12 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */
outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */
/* Reset the counter */
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
/* Load the counter from PR0 */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
/* Reset RCAP (fires one-shot) */
outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));
#else
@ -447,11 +452,12 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
cmReg.reg.reserved = 0;
n = 0;
printk("Mode reg=0x%04x, 0x%04lx\n", cmReg.value, ADDR_CHAN_REG(REG_C0M,
n));
printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n",
cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
udelay(1000);
printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n)));
printk(KERN_INFO "Read back mode reg=0x%04x\n",
inw(ADDR_CHAN_REG(REG_C0M, n)));
/* Load the pre-load register high word */
/* value = (short) (0x55); */
@ -466,20 +472,23 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* Reset the counter if it is software preload */
if (cmReg.reg.autoLoadResetRcap == 0) {
outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); /* Reset the counter */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); /* Load the counter from PR0 */
/* Reset the counter */
outw(0x8000, ADDR_CHAN_REG(REG_C0C, n));
/* Load the counter from PR0 */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, n));
}
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
udelay(1000);
printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n)));
printk(KERN_INFO "Read back mode reg=0x%04x\n",
inw(ADDR_CHAN_REG(REG_C0M, n)));
#endif
printk("Current registres:\n");
printk(KERN_INFO "Current registres:\n");
for (i = 0; i < S526_NUM_PORTS; i++) {
printk("0x%02lx: 0x%04x\n", ADDR_REG(s526_ports[i]),
inw(ADDR_REG(s526_ports[i])));
printk(KERN_INFO "0x%02lx: 0x%04x\n",
ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
}
return 1;
}
@ -494,7 +503,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
*/
static int s526_detach(struct comedi_device *dev)
{
printk("comedi%d: s526: remove\n", dev->minor);
printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor);
if (dev->iobase > 0)
release_region(dev->iobase, S526_IOSIZE);
@ -513,7 +522,7 @@ static int s526_gpct_rinsn(struct comedi_device *dev,
/* Check if (n > 0) */
if (insn->n <= 0) {
printk("s526: INSN_READ: n should be > 0\n");
printk(KERN_ERR "s526: INSN_READ: n should be > 0\n");
return -EINVAL;
}
/* Read the low word first */
@ -522,7 +531,8 @@ static int s526_gpct_rinsn(struct comedi_device *dev,
datahigh = inw(ADDR_CHAN_REG(REG_C0H, counter_channel));
data[i] = (int)(datahigh & 0x00FF);
data[i] = (data[i] << 16) | (datalow & 0xFFFF);
/* printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow); */
/* printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n",
counter_channel, data[i], datahigh, datalow); */
}
return i;
}
@ -536,7 +546,8 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
short value;
union cmReg cmReg;
/* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); */
/* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n",
subdev_channel); */
for (i = 0; i < MAX_GPCT_CONFIG_DATA; i++) {
devpriv->s526_gpct_config[subdev_channel].data[i] =
@ -554,7 +565,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[2]: Pre-load Register Value
data[3]: Conter Control Register
*/
printk("s526: GPCT_INSN_CONFIG: Configuring Encoder\n");
printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring Encoder\n");
devpriv->s526_gpct_config[subdev_channel].app =
PositionMeasurement;
@ -563,7 +574,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
/* One-shot (software trigger) */
cmReg.reg.coutSource = 0; /* out RCAP */
cmReg.reg.coutPolarity = 1; /* Polarity inverted */
cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */
cmReg.reg.autoLoadResetRcap = 0;/* Auto load disabled */
cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */
cmReg.reg.ctEnableCtrl = 2; /* Hardware */
cmReg.reg.clockSource = 2; /* Internal */
@ -578,10 +589,13 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */
/* Reset the counter */
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
/* Load the counter from PR0 */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */
/* Reset RCAP (fires one-shot) */
outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));
#endif
@ -594,30 +608,34 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
/* Reset the counter if it is software preload */
if (cmReg.reg.autoLoadResetRcap == 0) {
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
/* outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); Load the counter from PR0 */
/* Reset the counter */
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
/* Load the counter from PR0
* outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
*/
}
#else
cmReg.reg.countDirCtrl = 0; /* 0 quadrature, 1 software control */
/* 0 quadrature, 1 software control */
cmReg.reg.countDirCtrl = 0;
/* data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 */
if (insn->data[1] == GPCT_X2) {
if (insn->data[1] == GPCT_X2)
cmReg.reg.clockSource = 1;
} else if (insn->data[1] == GPCT_X4) {
else if (insn->data[1] == GPCT_X4)
cmReg.reg.clockSource = 2;
} else {
else
cmReg.reg.clockSource = 0;
}
/* When to take into account the indexpulse: */
if (insn->data[2] == GPCT_IndexPhaseLowLow) {
/*if (insn->data[2] == GPCT_IndexPhaseLowLow) {
} else if (insn->data[2] == GPCT_IndexPhaseLowHigh) {
} else if (insn->data[2] == GPCT_IndexPhaseHighLow) {
} else if (insn->data[2] == GPCT_IndexPhaseHighHigh) {
}
}*/
/* Take into account the index pulse? */
if (insn->data[3] == GPCT_RESET_COUNTER_ON_INDEX)
cmReg.reg.autoLoadResetRcap = 4; /* Auto load with INDEX^ */
/* Auto load with INDEX^ */
cmReg.reg.autoLoadResetRcap = 4;
/* Set Counter Mode Register */
cmReg.value = (short)(insn->data[1] & 0xFFFF);
@ -638,8 +656,10 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
}
/* Reset the counter if it is software preload */
if (cmReg.reg.autoLoadResetRcap == 0) {
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */
/* Reset the counter */
outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
/* Load the counter from PR0 */
outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
}
#endif
break;
@ -652,7 +672,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
printk("s526: GPCT_INSN_CONFIG: Configuring SPG\n");
printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring SPG\n");
devpriv->s526_gpct_config[subdev_channel].app =
SinglePulseGeneration;
@ -697,7 +717,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
printk("s526: GPCT_INSN_CONFIG: Configuring PTG\n");
printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring PTG\n");
devpriv->s526_gpct_config[subdev_channel].app =
PulseTrainGeneration;
@ -735,7 +755,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
break;
default:
printk("s526: unsupported GPCT_insn_config\n");
printk(KERN_ERR "s526: unsupported GPCT_insn_config\n");
return -EINVAL;
break;
}
@ -751,20 +771,21 @@ static int s526_gpct_winsn(struct comedi_device *dev,
short value;
union cmReg cmReg;
printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel);
printk(KERN_INFO "s526: GPCT_INSN_WRITE on channel %d\n",
subdev_channel);
cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel));
printk("s526: Counter Mode Register: %x\n", cmReg.value);
printk(KERN_INFO "s526: Counter Mode Register: %x\n", cmReg.value);
/* Check what Application of Counter this channel is configured for */
switch (devpriv->s526_gpct_config[subdev_channel].app) {
case PositionMeasurement:
printk("S526: INSN_WRITE: PM\n");
printk(KERN_INFO "S526: INSN_WRITE: PM\n");
outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H,
subdev_channel));
outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel));
break;
case SinglePulseGeneration:
printk("S526: INSN_WRITE: SPG\n");
printk(KERN_INFO "S526: INSN_WRITE: SPG\n");
outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H,
subdev_channel));
outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel));
@ -777,14 +798,14 @@ static int s526_gpct_winsn(struct comedi_device *dev,
The above periods must be expressed as a multiple of the
pulse frequency on the selected source
*/
printk("S526: INSN_WRITE: PTG\n");
printk(KERN_INFO "S526: INSN_WRITE: PTG\n");
if ((insn->data[1] > insn->data[0]) && (insn->data[0] > 0)) {
(devpriv->s526_gpct_config[subdev_channel]).data[0] =
insn->data[0];
(devpriv->s526_gpct_config[subdev_channel]).data[1] =
insn->data[1];
} else {
printk("s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
printk(KERN_ERR "s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
insn->data[0], insn->data[1]);
return -EINVAL;
}
@ -873,7 +894,7 @@ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
if (i == TIMEOUT) {
/* printk() should be used instead of printk()
* whenever the code can be called from real-time. */
printk("s526: ADC(0x%04x) timeout\n",
printk(KERN_ERR "s526: ADC(0x%04x) timeout\n",
inw(ADDR_REG(REG_ISR)));
return -ETIMEDOUT;
}
@ -906,11 +927,14 @@ static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
* very useful, but that's how the interface is defined. */
for (i = 0; i < insn->n; i++) {
/* a typical programming sequence */
/* outw(data[i], dev->iobase + REG_ADD); write the data to preload register */
outw(data[i], ADDR_REG(REG_ADD)); /* write the data to preload register */
/* write the data to preload register
* outw(data[i], dev->iobase + REG_ADD);
*/
/* write the data to preload register */
outw(data[i], ADDR_REG(REG_ADD));
devpriv->ao_readback[chan] = data[i];
/* outw(val + 1, dev->iobase + REG_DAC); starts the D/A conversion. */
outw(val + 1, ADDR_REG(REG_DAC)); /* starts the D/A conversion. */
outw(val + 1, ADDR_REG(REG_DAC)); /*starts the D/A conversion.*/
}
/* return the number of samples read/written */
@ -954,7 +978,7 @@ static int s526_dio_insn_bits(struct comedi_device *dev,
/* on return, data[1] contains the value of the digital
* input and output lines. */
data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */
data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */
/* or we could just return the software copy of the output values if
* it was a purely digital output subdevice */
/* data[1]=s->state & 0xFF; */
@ -969,7 +993,7 @@ static int s526_dio_insn_config(struct comedi_device *dev,
int chan = CR_CHAN(insn->chanspec);
int group, mask;
printk("S526 DIO insn_config\n");
printk(KERN_INFO "S526 DIO insn_config\n");
/* The input or output configuration of each digital line is
* configured by a special insn_config instruction. chanspec
@ -980,11 +1004,12 @@ static int s526_dio_insn_config(struct comedi_device *dev,
mask = 0xF << (group << 2);
switch (data[0]) {
case INSN_CONFIG_DIO_OUTPUT:
s->state |= 1 << (group + 10); // bit 10/11 set the group 1/2's mode
/* bit 10/11 set the group 1/2's mode */
s->state |= 1 << (group + 10);
s->io_bits |= mask;
break;
case INSN_CONFIG_DIO_INPUT:
s->state &= ~(1 << (group + 10));// 1 is output, 0 is input.
s->state &= ~(1 << (group + 10)); /* 1 is output, 0 is input. */
s->io_bits &= ~mask;
break;
case INSN_CONFIG_DIO_QUERY: