From c86dc03e54ce15aac623125d92faac005f94267b Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 30 Sep 2015 15:25:49 +0800 Subject: [PATCH] regulator: act8865: support output voltage by VSET2[] bits For the step-down DC/DC regulators, the output voltage is selectable by setting VSEL pin that when VSEL is low, output voltage is programmed by VSET1[] bits, and when VSEL is high, output voltage is programmed by VSET2[] bits. The DT property "active-semi,vsel-high" is used to specify the VSEL pin at high on the board. Signed-off-by: Wenyou Yang Reviewed-by: Ludovic Desroches Signed-off-by: Mark Brown --- drivers/regulator/act8865-regulator.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 896db168e4bd..f8d4cd3d1397 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -261,6 +261,16 @@ static const struct regulator_desc act8865_regulators[] = { ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), }; +static const struct regulator_desc act8865_alt_regulators[] = { + ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"), + ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"), + ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"), + ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"), + ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"), + ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"), + ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), +}; + #ifdef CONFIG_OF static const struct of_device_id act8865_dt_ids[] = { { .compatible = "active-semi,act8600", .data = (void *)ACT8600 }, @@ -413,6 +423,7 @@ static int act8865_pmic_probe(struct i2c_client *client, struct act8865 *act8865; unsigned long type; int off_reg, off_mask; + int voltage_select = 0; pdata = dev_get_platdata(dev); @@ -424,6 +435,10 @@ static int act8865_pmic_probe(struct i2c_client *client, return -ENODEV; type = (unsigned long) id->data; + + voltage_select = !!of_get_property(dev->of_node, + "active-semi,vsel-high", + NULL); } else { type = i2c_id->driver_data; } @@ -442,8 +457,13 @@ static int act8865_pmic_probe(struct i2c_client *client, off_mask = ACT8846_OFF_SYSMASK; break; case ACT8865: - regulators = act8865_regulators; - num_regulators = ARRAY_SIZE(act8865_regulators); + if (voltage_select) { + regulators = act8865_alt_regulators; + num_regulators = ARRAY_SIZE(act8865_alt_regulators); + } else { + regulators = act8865_regulators; + num_regulators = ARRAY_SIZE(act8865_regulators); + } off_reg = ACT8865_SYS_CTRL; off_mask = ACT8865_MSTROFF; break;