forked from Minki/linux
mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration
Allwinner NAND controllers can make use of DMA to enhance the I/O
throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP
is a bit different than with the older SoCs, hence the introduction of
a new compatible to handle:
* the differences between register offsets,
* the burst length change from 4 to minimum 8,
* manage SRAM accesses through MBUS with extra configuration.
Fixes: c49836f05a
("mtd: rawnand: sunxi: Add A23/A33 DMA support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This commit is contained in:
parent
4f032640bf
commit
c7a87ceb17
@ -43,6 +43,7 @@
|
||||
#define NFC_REG_RCMD_SET 0x0028
|
||||
#define NFC_REG_WCMD_SET 0x002C
|
||||
#define NFC_REG_A10_IO_DATA 0x0030
|
||||
#define NFC_REG_A23_IO_DATA 0x0300
|
||||
#define NFC_REG_ECC_CTL 0x0034
|
||||
#define NFC_REG_ECC_ST 0x0038
|
||||
#define NFC_REG_DEBUG 0x003C
|
||||
@ -50,6 +51,7 @@
|
||||
#define NFC_REG_USER_DATA(x) (0x0050 + ((x) * 4))
|
||||
#define NFC_REG_SPARE_AREA 0x00A0
|
||||
#define NFC_REG_PAT_ID 0x00A4
|
||||
#define NFC_REG_MDMA_CNT 0x00C4
|
||||
#define NFC_RAM0_BASE 0x0400
|
||||
#define NFC_RAM1_BASE 0x0800
|
||||
|
||||
@ -68,6 +70,7 @@
|
||||
#define NFC_PAGE_SHIFT(x) (((x) < 10 ? 0 : (x) - 10) << 8)
|
||||
#define NFC_SAM BIT(12)
|
||||
#define NFC_RAM_METHOD BIT(14)
|
||||
#define NFC_DMA_TYPE_NORMAL BIT(15)
|
||||
#define NFC_DEBUG_CTL BIT(31)
|
||||
|
||||
/* define bit use in NFC_ST */
|
||||
@ -204,10 +207,13 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
|
||||
* NAND Controller capabilities structure: stores NAND controller capabilities
|
||||
* for distinction between compatible strings.
|
||||
*
|
||||
* @extra_mbus_conf: Contrary to A10, A10s and A13, accessing internal RAM
|
||||
* through MBUS on A23/A33 needs extra configuration.
|
||||
* @reg_io_data: I/O data register
|
||||
* @dma_maxburst: DMA maxburst
|
||||
*/
|
||||
struct sunxi_nfc_caps {
|
||||
bool extra_mbus_conf;
|
||||
unsigned int reg_io_data;
|
||||
unsigned int dma_maxburst;
|
||||
};
|
||||
@ -367,6 +373,9 @@ static int sunxi_nfc_dma_op_prepare(struct sunxi_nfc *nfc, const void *buf,
|
||||
nfc->regs + NFC_REG_CTL);
|
||||
writel(nchunks, nfc->regs + NFC_REG_SECTOR_NUM);
|
||||
writel(chunksize, nfc->regs + NFC_REG_CNT);
|
||||
if (nfc->caps->extra_mbus_conf)
|
||||
writel(chunksize * nchunks, nfc->regs + NFC_REG_MDMA_CNT);
|
||||
|
||||
dmat = dmaengine_submit(dmad);
|
||||
|
||||
ret = dma_submit_error(dmat);
|
||||
@ -2127,6 +2136,11 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
|
||||
dmac_cfg.src_maxburst = nfc->caps->dma_maxburst;
|
||||
dmac_cfg.dst_maxburst = nfc->caps->dma_maxburst;
|
||||
dmaengine_slave_config(nfc->dmac, &dmac_cfg);
|
||||
|
||||
if (nfc->caps->extra_mbus_conf)
|
||||
writel(readl(nfc->regs + NFC_REG_CTL) |
|
||||
NFC_DMA_TYPE_NORMAL, nfc->regs + NFC_REG_CTL);
|
||||
|
||||
} else {
|
||||
dev_warn(dev, "failed to request rxtx DMA channel\n");
|
||||
}
|
||||
@ -2175,11 +2189,21 @@ static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = {
|
||||
.dma_maxburst = 4,
|
||||
};
|
||||
|
||||
static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = {
|
||||
.extra_mbus_conf = true,
|
||||
.reg_io_data = NFC_REG_A23_IO_DATA,
|
||||
.dma_maxburst = 8,
|
||||
};
|
||||
|
||||
static const struct of_device_id sunxi_nfc_ids[] = {
|
||||
{
|
||||
.compatible = "allwinner,sun4i-a10-nand",
|
||||
.data = &sunxi_nfc_a10_caps,
|
||||
},
|
||||
{
|
||||
.compatible = "allwinner,sun8i-a23-nand-controller",
|
||||
.data = &sunxi_nfc_a23_caps,
|
||||
},
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);
|
||||
|
Loading…
Reference in New Issue
Block a user