Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...

Documentation/spi/pxa2xx

@@ -62,7 +62,7 @@ static struct resource pxa_spi_nssp_resources[] = {
 
 static struct pxa2xx_spi_master pxa_nssp_master_info = {
 	.ssp_type = PXA25x_NSSP, /* Type of SSP */
-	.clock_enable = CKEN9_NSSP, /* NSSP Peripheral clock */
+	.clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */
 	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
 	.enable_dma = 1, /* Enables NSSP DMA */
 };

arch/arm/Kconfig

@@ -29,6 +29,10 @@ config GENERIC_TIME
 	bool
 	default n
 
+config GENERIC_CLOCKEVENTS
+	bool
+	default n
+
 config MMU
 	bool
 	default y
@@ -67,6 +71,14 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config STACKTRACE_SUPPORT
+	bool
+	default y
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
@@ -162,6 +174,8 @@ config ARCH_VERSATILE
 	select ARM_AMBA
 	select ARM_VIC
 	select ICST307
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 	  This enables support for ARM Ltd Versatile board.
 
@@ -263,6 +277,7 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -364,6 +379,7 @@ config ARCH_LH7A40X
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
+	select GENERIC_TIME
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -514,6 +530,8 @@ endmenu
 
 menu "Kernel Features"
 
+source "kernel/time/Kconfig"
+
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && REALVIEW_MPCORE
@@ -573,6 +591,7 @@ config PREEMPT
 
 config NO_IDLE_HZ
 	bool "Dynamic tick timer"
+	depends on !GENERIC_CLOCKEVENTS
 	help
 	  Select this option if you want to disable continuous timer ticks
 	  and have them programmed to occur as required. This option saves
@@ -670,6 +689,7 @@ config LEDS_TIMER
 	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
 			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
 	depends on LEDS
+	depends on !GENERIC_CLOCKEVENTS
 	default y if ARCH_EBSA110
 	help
 	  If you say Y here, one of the system LEDs (the green one on the

arch/arm/boot/compressed/head-at91rm9200.S

@@ -61,6 +61,12 @@
 		cmp	r7, r3
 		beq	99f
 
+		@ picotux 200 : 963
+		mov	r3,	#(MACH_TYPE_PICOTUX2XX & 0xff)
+		orr	r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00)
+		cmp	r7, r3
+		beq	99f
+
 		@ Ajeco 1ARM : 1075
 		mov	r3,	#(MACH_TYPE_ONEARM & 0xff)
 		orr	r3, r3, #(MACH_TYPE_ONEARM & 0xff00)

arch/arm/common/sa1111.c

@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>

arch/arm/common/via82c505.c

@@ -1,6 +1,5 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/ptrace.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
 #include <linux/init.h>

arch/arm/configs/ixp4xx_defconfig

@@ -117,11 +117,13 @@ CONFIG_ARCH_ADI_COYOTE=y
 CONFIG_ARCH_IXDP425=y
 CONFIG_MACH_IXDPG425=y
 CONFIG_MACH_IXDP465=y
+CONFIG_MACH_KIXRP435=y
 CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_ARCH_IXDP4XX=y
 CONFIG_CPU_IXP46X=y
+CONFIG_CPU_IXP43X=y
 # CONFIG_MACH_GTWX5715 is not set
 
 #

arch/arm/kernel/Makefile

@@ -7,8 +7,8 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
 # Object file lists.
 
 obj-y		:= compat.o entry-armv.o entry-common.o irq.o \
-		   process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \
+		   process.o ptrace.o semaphore.o setup.o signal.o \
-		   time.o traps.o
+		   sys_arm.o stacktrace.o time.o traps.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 

arch/arm/kernel/ecard.c

@@ -40,6 +40,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
+#include <linux/kthread.h>
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
@@ -50,6 +51,8 @@
 #include <asm/mach/irq.h>
 #include <asm/tlbflush.h>
 
+#include "ecard.h"
+
 #ifndef CONFIG_ARCH_RPC
 #define HAVE_EXPMASK
 #endif
@@ -123,7 +126,7 @@ static void ecard_task_reset(struct ecard_request *req)
 
 	res = ec->slot_no == 8
 		? &ec->resource[ECARD_RES_MEMC]
-		: ec->type == ECARD_EASI
+		: ec->easi
 		  ? &ec->resource[ECARD_RES_EASI]
 		  : &ec->resource[ECARD_RES_IOCSYNC];
 
@@ -178,7 +181,7 @@ static void ecard_task_readbytes(struct ecard_request *req)
 			index += 1;
 		}
 	} else {
-		unsigned long base = (ec->type == ECARD_EASI
+		unsigned long base = (ec->easi
 			 ? &ec->resource[ECARD_RES_EASI]
 			 : &ec->resource[ECARD_RES_IOCSYNC])->start;
 		void __iomem *pbase = (void __iomem *)base;
@@ -263,8 +266,6 @@ static int ecard_init_mm(void)
 static int
 ecard_task(void * unused)
 {
-	daemonize("kecardd");
-
 	/*
 	 * Allocate a mm.  We're not a lazy-TLB kernel task since we need
 	 * to set page table entries where the user space would be.  Note
@@ -727,7 +728,7 @@ static int ecard_prints(char *buffer, ecard_t *ec)
 	char *start = buffer;
 
 	buffer += sprintf(buffer, "  %d: %s ", ec->slot_no,
-			  ec->type == ECARD_EASI ? "EASI" : "    ");
+			  ec->easi ? "EASI" : "    ");
 
 	if (ec->cid.id == 0) {
 		struct in_chunk_dir incd;
@@ -814,7 +815,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 	}
 
 	ec->slot_no = slot;
-	ec->type = type;
+	ec->easi = type == ECARD_EASI;
 	ec->irq = NO_IRQ;
 	ec->fiq = NO_IRQ;
 	ec->dma = NO_DMA;
@@ -825,6 +826,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 	ec->dev.bus = &ecard_bus_type;
 	ec->dev.dma_mask = &ec->dma_mask;
 	ec->dma_mask = (u64)0xffffffff;
+	ec->dev.coherent_dma_mask = ec->dma_mask;
 
 	if (slot < 4) {
 		ec_set_resource(ec, ECARD_RES_MEMC,
@@ -907,7 +909,7 @@ static ssize_t ecard_show_device(struct device *dev, struct device_attribute *at
 static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct expansion_card *ec = ECARD_DEV(dev);
-	return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC");
+	return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
 }
 
 static struct device_attribute ecard_dev_attrs[] = {
@@ -1058,13 +1060,14 @@ ecard_probe(int slot, card_type_t type)
  */
 static int __init ecard_init(void)
 {
-	int slot, irqhw, ret;
+	struct task_struct *task;
+	int slot, irqhw;
 
-	ret = kernel_thread(ecard_task, NULL, CLONE_KERNEL);
+	task = kthread_run(ecard_task, NULL, "kecardd");
-	if (ret < 0) {
+	if (IS_ERR(task)) {
-		printk(KERN_ERR "Ecard: unable to create kernel thread: %d\n",
+		printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
-		       ret);
+		       PTR_ERR(task));
-		return ret;
+		return PTR_ERR(task);
 	}
 
 	printk("Probing expansion cards\n");

arch/arm/kernel/ecard.h

@@ -0,0 +1,56 @@
+/*
+ *  ecard.h
+ *
+ *  Copyright 2007 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Definitions internal to ecard.c - for it's use only!!
+ *
+ * External expansion card header as read from the card
+ */
+struct ex_ecid {
+	unsigned char	r_irq:1;
+	unsigned char	r_zero:1;
+	unsigned char	r_fiq:1;
+	unsigned char	r_id:4;
+	unsigned char	r_a:1;
+
+	unsigned char	r_cd:1;
+	unsigned char	r_is:1;
+	unsigned char	r_w:2;
+	unsigned char	r_r1:4;
+
+	unsigned char	r_r2:8;
+
+	unsigned char	r_prod[2];
+
+	unsigned char	r_manu[2];
+
+	unsigned char	r_country;
+
+	unsigned char	r_fiqmask;
+	unsigned char	r_fiqoff[3];
+
+	unsigned char	r_irqmask;
+	unsigned char	r_irqoff[3];
+};
+
+/*
+ * Chunk directory entry as read from the card
+ */
+struct ex_chunk_dir {
+	unsigned char r_id;
+	unsigned char r_len[3];
+	unsigned long r_start;
+	union {
+		char string[256];
+		char data[1];
+	} d;
+#define c_id(x)		((x)->r_id)
+#define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
+#define c_start(x)	((x)->r_start)
+};

arch/arm/kernel/head.S

@@ -257,7 +257,9 @@ __create_page_tables:
 	 * Map some ram to cover our .data and .bss areas.
 	 */
 	orr	r3, r7, #(KERNEL_RAM_PADDR & 0xff000000)
+	.if	(KERNEL_RAM_PADDR & 0x00f00000)
 	orr	r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000)
+	.endif
 	add	r0, r4,  #(KERNEL_RAM_VADDR & 0xff000000) >> 18
 	str	r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
 	ldr	r6, =(_end - 1)
@@ -274,7 +276,9 @@ __create_page_tables:
 	 */
 	add	r0, r4, #PAGE_OFFSET >> 18
 	orr	r6, r7, #(PHYS_OFFSET & 0xff000000)
-	orr	r6, r6, #(PHYS_OFFSET & 0x00e00000)
+	.if	(PHYS_OFFSET & 0x00f00000)
+	orr	r6, r6, #(PHYS_OFFSET & 0x00f00000)
+	.endif
 	str	r6, [r0]
 
 #ifdef CONFIG_DEBUG_LL

arch/arm/kernel/irq.c

@@ -27,7 +27,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/smp.h>
@@ -109,7 +108,7 @@ static struct irq_desc bad_irq_desc = {
  * come via this function.  Instead, they should provide their
  * own 'handler'
  */
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	struct irq_desc *desc = irq_desc + irq;

arch/arm/kernel/process.c

@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
-#include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
@@ -28,6 +27,7 @@
 #include <linux/cpu.h>
 #include <linux/elfcore.h>
 #include <linux/pm.h>
+#include <linux/tick.h>
 
 #include <asm/leds.h>
 #include <asm/processor.h>
@@ -160,9 +160,11 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 		leds_event(led_idle_start);
+		tick_nohz_stop_sched_tick();
 		while (!need_resched())
 			idle();
 		leds_event(led_idle_end);
+		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();

arch/arm/kernel/ptrace.c

@@ -457,13 +457,10 @@ void ptrace_cancel_bpt(struct task_struct *child)
 
 /*
  * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
  */
 void ptrace_disable(struct task_struct *child)
 {
-	child->ptrace &= ~PT_SINGLESTEP;
+	single_step_disable(child);
-	ptrace_cancel_bpt(child);
 }
 
 /*
@@ -712,9 +709,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			else
 				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 			child->exit_code = data;
-			/* make sure single-step breakpoint is gone. */
+			single_step_disable(child);
-			child->ptrace &= ~PT_SINGLESTEP;
-			ptrace_cancel_bpt(child);
 			wake_up_process(child);
 			ret = 0;
 			break;
@@ -725,9 +720,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		 * exit.
 		 */
 		case PTRACE_KILL:
-			/* make sure single-step breakpoint is gone. */
+			single_step_disable(child);
-			child->ptrace &= ~PT_SINGLESTEP;
-			ptrace_cancel_bpt(child);
 			if (child->exit_state != EXIT_ZOMBIE) {
 				child->exit_code = SIGKILL;
 				wake_up_process(child);
@@ -742,7 +735,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = -EIO;
 			if (!valid_signal(data))
 				break;
-			child->ptrace |= PT_SINGLESTEP;
+			single_step_enable(child);
 			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 			child->exit_code = data;
 			/* give it a chance to run. */
@@ -786,8 +779,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 
 		case PTRACE_SET_SYSCALL:
+			task_thread_info(child)->syscall = data;
 			ret = 0;
-			child->ptrace_message = data;
 			break;
 
 #ifdef CONFIG_CRUNCH
@@ -824,7 +817,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	ip = regs->ARM_ip;
 	regs->ARM_ip = why;
 
-	current->ptrace_message = scno;
+	current_thread_info()->syscall = scno;
 
 	/* the 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
@@ -841,5 +834,5 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	}
 	regs->ARM_ip = ip;
 
-	return current->ptrace_message;
+	return current_thread_info()->syscall;
 }

arch/arm/kernel/ptrace.h

@@ -7,6 +7,45 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/ptrace.h>
+
 extern void ptrace_cancel_bpt(struct task_struct *);
 extern void ptrace_set_bpt(struct task_struct *);
 extern void ptrace_break(struct task_struct *, struct pt_regs *);
+
+/*
+ * make sure single-step breakpoint is gone.
+ */
+static inline void single_step_disable(struct task_struct *task)
+{
+	task->ptrace &= ~PT_SINGLESTEP;
+	ptrace_cancel_bpt(task);
+}
+
+static inline void single_step_enable(struct task_struct *task)
+{
+	task->ptrace |= PT_SINGLESTEP;
+}
+
+/*
+ * Send SIGTRAP if we're single-stepping
+ */
+static inline void single_step_trap(struct task_struct *task)
+{
+	if (task->ptrace & PT_SINGLESTEP) {
+		ptrace_cancel_bpt(task);
+		send_sig(SIGTRAP, task, 1);
+	}
+}
+
+static inline void single_step_clear(struct task_struct *task)
+{
+	if (task->ptrace & PT_SINGLESTEP)
+		ptrace_cancel_bpt(task);
+}
+
+static inline void single_step_set(struct task_struct *task)
+{
+	if (task->ptrace & PT_SINGLESTEP)
+		ptrace_set_bpt(task);
+}

arch/arm/kernel/signal.c

@@ -9,7 +9,6 @@
  */
 #include <linux/errno.h>
 #include <linux/signal.h>
-#include <linux/ptrace.h>
 #include <linux/personality.h>
 #include <linux/freezer.h>
 
@@ -285,11 +284,7 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs)
 	if (restore_sigframe(regs, frame))
 		goto badframe;
 
-	/* Send SIGTRAP if we're single-stepping */
+	single_step_trap(current);
-	if (current->ptrace & PT_SINGLESTEP) {
-		ptrace_cancel_bpt(current);
-		send_sig(SIGTRAP, current, 1);
-	}
 
 	return regs->ARM_r0;
 
@@ -324,11 +319,7 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 	if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT)
 		goto badframe;
 
-	/* Send SIGTRAP if we're single-stepping */
+	single_step_trap(current);
-	if (current->ptrace & PT_SINGLESTEP) {
-		ptrace_cancel_bpt(current);
-		send_sig(SIGTRAP, current, 1);
-	}
 
 	return regs->ARM_r0;
 
@@ -644,14 +635,12 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 	if (try_to_freeze())
 		goto no_signal;
 
-	if (current->ptrace & PT_SINGLESTEP)
+	single_step_clear(current);
-		ptrace_cancel_bpt(current);
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
 		handle_signal(signr, &ka, &info, oldset, regs, syscall);
-		if (current->ptrace & PT_SINGLESTEP)
+		single_step_set(current);
-			ptrace_set_bpt(current);
 		return 1;
 	}
 
@@ -705,8 +694,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 			restart_syscall(regs);
 		}
 	}
-	if (current->ptrace & PT_SINGLESTEP)
+	single_step_set(current);
-		ptrace_set_bpt(current);
 	return 0;
 }
 

arch/arm/kernel/stacktrace.c

@@ -0,0 +1,73 @@
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+
+#include "stacktrace.h"
+
+int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
+		    int (*fn)(struct stackframe *, void *), void *data)
+{
+	struct stackframe *frame;
+
+	do {
+		/*
+		 * Check current frame pointer is within bounds
+		 */
+		if ((fp - 12) < low || fp + 4 >= high)
+			break;
+
+		frame = (struct stackframe *)(fp - 12);
+
+		if (fn(frame, data))
+			break;
+
+		/*
+		 * Update the low bound - the next frame must always
+		 * be at a higher address than the current frame.
+		 */
+		low = fp + 4;
+		fp = frame->fp;
+	} while (fp);
+
+	return 0;
+}
+
+#ifdef CONFIG_STACKTRACE
+struct stack_trace_data {
+	struct stack_trace *trace;
+	unsigned int skip;
+};
+
+static int save_trace(struct stackframe *frame, void *d)
+{
+	struct stack_trace_data *data = d;
+	struct stack_trace *trace = data->trace;
+
+	if (data->skip) {
+		data->skip--;
+		return 0;
+	}
+
+	trace->entries[trace->nr_entries++] = frame->lr;
+
+	return trace->nr_entries >= trace->max_entries;
+}
+
+void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
+{
+	struct stack_trace_data data;
+	unsigned long fp, base;
+
+	data.trace = trace;
+	data.skip = trace->skip;
+
+	if (task) {
+		base = (unsigned long)task_stack_page(task);
+		fp = 0; /* FIXME */
+	} else {
+		base = (unsigned long)task_stack_page(current);
+		asm("mov %0, fp" : "=r" (fp));
+	}
+
+	walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+}
+#endif

arch/arm/kernel/stacktrace.h

@@ -0,0 +1,9 @@
+struct stackframe {
+	unsigned long fp;
+	unsigned long sp;
+	unsigned long lr;
+	unsigned long pc;
+};
+
+int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
+		    int (*fn)(struct stackframe *, void *), void *data);

arch/arm/kernel/time.c

@@ -327,6 +327,7 @@ void restore_time_delta(struct timespec *delta, struct timespec *rtc)
 }
 EXPORT_SYMBOL(restore_time_delta);
 
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
  */
@@ -340,8 +341,9 @@ void timer_tick(void)
 	update_process_times(user_mode(get_irq_regs()));
 #endif
 }
+#endif
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
 static int timer_suspend(struct sys_device *dev, pm_message_t state)
 {
 	struct sys_timer *timer = container_of(dev, struct sys_timer, dev);

arch/arm/kernel/traps.c

@@ -16,7 +16,6 @@
 #include <linux/signal.h>
 #include <linux/spinlock.h>
 #include <linux/personality.h>
-#include <linux/ptrace.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
 #include <linux/init.h>
@@ -45,7 +44,18 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-void dump_backtrace_entry(unsigned long where, unsigned long from)
+static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+
+static inline int in_exception_text(unsigned long ptr)
+{
+	extern char __exception_text_start[];
+	extern char __exception_text_end[];
+
+	return ptr >= (unsigned long)&__exception_text_start &&
+	       ptr < (unsigned long)&__exception_text_end;
+}
+
+void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
 	printk("[<%08lx>] ", where);
@@ -55,6 +65,9 @@ void dump_backtrace_entry(unsigned long where, unsigned long from)
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
+
+	if (in_exception_text(where))
+		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 /*
@@ -266,13 +279,14 @@ void unregister_undef_hook(struct undef_hook *hook)
 	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
-asmlinkage void do_undefinstr(struct pt_regs *regs)
+asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 {
 	unsigned int correction = thumb_mode(regs) ? 2 : 4;
 	unsigned int instr;
 	struct undef_hook *hook;
 	siginfo_t info;
 	void __user *pc;
+	unsigned long flags;
 
 	/*
 	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
@@ -291,7 +305,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
 		get_user(instr, (u32 __user *)pc);
 	}
 
-	spin_lock_irq(&undef_lock);
+	spin_lock_irqsave(&undef_lock, flags);
 	list_for_each_entry(hook, &undef_hook, node) {
 		if ((instr & hook->instr_mask) == hook->instr_val &&
 		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
@@ -301,7 +315,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
 			}
 		}
 	}
-	spin_unlock_irq(&undef_lock);
+	spin_unlock_irqrestore(&undef_lock, flags);
 
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {

arch/arm/kernel/vmlinux.lds.S

@@ -83,6 +83,9 @@ SECTIONS
 
 	.text : {			/* Real text segment		*/
 		_text = .;		/* Text and read-only data	*/
+			__exception_text_start = .;
+			*(.exception.text)
+			__exception_text_end = .;
 			*(.text)
 			SCHED_TEXT
 			LOCK_TEXT

arch/arm/lib/backtrace.S

@@ -17,8 +17,8 @@
 @ fp is 0 or stack frame
 
 #define frame	r4
-#define next	r5
+#define sv_fp	r5
-#define save	r6
+#define sv_pc	r6
 #define mask	r7
 #define offset	r8
 
@@ -31,108 +31,106 @@ ENTRY(c_backtrace)
 #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
 		mov	pc, lr
 #else
-
 		stmfd	sp!, {r4 - r8, lr}	@ Save an extra register so we have a location...
-		tst	r1, #0x10		@ 26 or 32-bit?
+		movs	frame, r0		@ if frame pointer is zero
-		moveq	mask, #0xfc000003
+		beq	no_frame		@ we have no stack frames
-		movne	mask, #0
-		tst	mask, r0
-		movne	r0, #0
-		movs	frame, r0
-1:		moveq	r0, #-2
-		ldmeqfd	sp!, {r4 - r8, pc}
 
-2:		stmfd	sp!, {pc}		@ calculate offset of PC in STMIA instruction
+		tst	r1, #0x10		@ 26 or 32-bit mode?
-		ldr	r0, [sp], #4
+		moveq	mask, #0xfc000003	@ mask for 26-bit
-		adr	r1, 2b - 4
+		movne	mask, #0		@ mask for 32-bit
+
+1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
+		ldr	r0, [sp], #4		@ by stmfd for this CPU
+		adr	r1, 1b
 		sub	offset, r0, r1
 
-3:		tst	frame, mask		@ Check for address exceptions...
+/*
-		bne	1b
+ * Stack frame layout:
+ *             optionally saved caller registers (r4 - r10)
+ *             saved fp
+ *             saved sp
+ *             saved lr
+ *    frame => saved pc
+ *             optionally saved arguments (r0 - r3)
+ * saved sp => <next word>
+ *
+ * Functions start with the following code sequence:
+ *                  mov   ip, sp
+ *                  stmfd sp!, {r0 - r3} (optional)
+ * corrected pc =>  stmfd sp!, {..., fp, ip, lr, pc}
+ */
+for_each_frame:	tst	frame, mask		@ Check for address exceptions
+		bne	no_frame
 
-1001:		ldr	next, [frame, #-12]	@ get fp
+1001:		ldr	sv_pc, [frame, #0]	@ get saved pc
-1002:		ldr	r2, [frame, #-4]	@ get lr
+1002:		ldr	sv_fp, [frame, #-12]	@ get saved fp
-1003:		ldr	r3, [frame, #0]		@ get pc
+
-		sub	save, r3, offset	@ Correct PC for prefetching
+		sub	sv_pc, sv_pc, offset	@ Correct PC for prefetching
-		bic	save, save, mask
+		bic	sv_pc, sv_pc, mask	@ mask PC/LR for the mode
-1004:		ldr	r1, [save, #0]		@ get instruction at function
+
-		mov	r1, r1, lsr #10
+1003:		ldr	r2, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
-		ldr	r3, .Ldsi+4
+		ldr	r3, .Ldsi+4		@ adjust saved 'pc' back one
-		teq	r1, r3
+		teq	r3, r2, lsr #10		@ instruction
-		subeq	save, save, #4
+		subne	r0, sv_pc, #4		@ allow for mov
-		mov	r0, save
+		subeq	r0, sv_pc, #8		@ allow for mov + stmia
-		bic	r1, r2, mask
+
+		ldr	r1, [frame, #-4]	@ get saved lr
+		mov	r2, frame
+		bic	r1, r1, mask		@ mask PC/LR for the mode
 		bl	dump_backtrace_entry
 
-		ldr	r0, [frame, #-8]	@ get sp
+		ldr	r1, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
-		sub	r0, r0, #4
+		ldr	r3, .Ldsi+4
-1005:		ldr	r1, [save, #4]		@ get instruction at function+4
+		teq	r3, r1, lsr #10
-		mov	r3, r1, lsr #10
+		ldreq	r0, [frame, #-8]	@ get sp
-		ldr	r2, .Ldsi+4
+		subeq	r0, r0, #4		@ point at the last arg
-		teq	r3, r2			@ Check for stmia sp!, {args}
+		bleq	.Ldumpstm		@ dump saved registers
-		addeq	save, save, #4		@ next instruction
-		bleq	.Ldumpstm
 
-		sub	r0, frame, #16
+1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
-1006:		ldr	r1, [save, #4]		@ Get 'stmia sp!, {rlist, fp, ip, lr, pc}' instruction
+		ldr	r3, .Ldsi		@ instruction exists,
-		mov	r3, r1, lsr #10
+		teq	r3, r1, lsr #10
-		ldr	r2, .Ldsi
+		subeq	r0, frame, #16
-		teq	r3, r2
+		bleq	.Ldumpstm		@ dump saved registers
-		bleq	.Ldumpstm
 
-		/*
+		teq	sv_fp, #0		@ zero saved fp means
-		 * A zero next framepointer means we're done.
+		beq	no_frame		@ no further frames
-		 */
-		teq	next, #0
-		ldmeqfd	sp!, {r4 - r8, pc}
 
-		/*
+		cmp	sv_fp, frame		@ next frame must be
-		 * The next framepointer must be above the
+		mov	frame, sv_fp		@ above the current frame
-		 * current framepointer.
+		bhi	for_each_frame
-		 */
-		cmp	next, frame
-		mov	frame, next
-		bhi	3b
-		b	1007f
 
-/*
+1006:		adr	r0, .Lbad
- * Fixup for LDMDB.  Note that this must not be in the fixup section.
- */
-1007:		ldr	r0, =.Lbad
 		mov	r1, frame
 		bl	printk
-		ldmfd	sp!, {r4 - r8, pc}
+no_frame:	ldmfd	sp!, {r4 - r8, pc}
-		.ltorg
 		
 		.section __ex_table,"a"
 		.align	3
-		.long	1001b, 1007b
+		.long	1001b, 1006b
-		.long	1002b, 1007b
+		.long	1002b, 1006b
-		.long	1003b, 1007b
+		.long	1003b, 1006b
-		.long	1004b, 1007b
+		.long	1004b, 1006b
-		.long	1005b, 1007b
-		.long	1006b, 1007b
 		.previous
 
 #define instr r4
 #define reg   r5
 #define stack r6
 
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, r8, lr}
+.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
 		mov	stack, r0
 		mov	instr, r1
-		mov	reg, #9
+		mov	reg, #10
 		mov	r7, #0
 1:		mov	r3, #1
 		tst	instr, r3, lsl reg
 		beq	2f
 		add	r7, r7, #1
-		teq	r7, #4
+		teq	r7, #6
-		moveq	r7, #0
+		moveq	r7, #1
-		moveq	r3, #'\n'
+		moveq	r1, #'\n'
-		movne	r3, #' '
+		movne	r1, #' '
-		ldr	r2, [stack], #-4
+		ldr	r3, [stack], #-4
-		mov	r1, reg
+		mov	r2, reg
 		adr	r0, .Lfp
 		bl	printk
 2:		subs	reg, reg, #1
@@ -140,14 +138,13 @@ ENTRY(c_backtrace)
 		teq	r7, #0
 		adrne	r0, .Lcr
 		blne	printk
-		mov	r0, stack
+		ldmfd	sp!, {instr, reg, stack, r7, pc}
-		ldmfd	sp!, {instr, reg, stack, r7, r8, pc}
 
-.Lfp:		.asciz	" r%d = %08X%c"
+.Lfp:		.asciz	"%cr%d:%08x"
 .Lcr:		.asciz	"\n"
 .Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
 		.align
-.Ldsi:		.word	0x00e92dd8 >> 2
+.Ldsi:		.word	0xe92dd800 >> 10	@ stmfd sp!, {... fp, ip, lr, pc}
-		.word	0x00e92d00 >> 2
+		.word	0xe92d0000 >> 10	@ stmfd sp!, {}
 
 #endif

arch/arm/lib/getuser.S

@@ -26,8 +26,6 @@
  * Note that ADDR_LIMIT is either 0 or 0xc0000000.
  * Note also that it is intended that __get_user_bad is not global.
  */
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
 #include <asm/errno.h>
 
 	.global	__get_user_1

arch/arm/lib/putuser.S

@@ -26,8 +26,6 @@
  * Note that ADDR_LIMIT is either 0 or 0xc0000000
  * Note also that it is intended that __put_user_bad is not global.
  */
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
 #include <asm/errno.h>
 
 	.global	__put_user_1

arch/arm/mach-at91/Kconfig

@@ -81,6 +81,13 @@ config MACH_KB9200
 	  Select this if you are using KwikByte's KB920x board.
 	  <http://kwikbyte.com/KB9202_description_new.htm>
 
+config MACH_PICOTUX2XX
+	bool "picotux 200"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using a picotux 200.
+	  <http://www.picotux.com/>
+
 config MACH_KAFA
 	bool "Sperry-Sun KAFA board"
 	depends on ARCH_AT91RM9200

arch/arm/mach-at91/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
 obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
 obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
+obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o

arch/arm/mach-at91/at91rm9200.c

@@ -117,6 +117,21 @@ static struct clk pioD_clk = {
 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc2_clk = {
+	.name		= "ssc2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_SSC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk tc0_clk = {
 	.name		= "tc0_clk",
 	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
@@ -161,7 +176,9 @@ static struct clk *periph_clocks[] __initdata = {
 	&udc_clk,
 	&twi_clk,
 	&spi_clk,
-	// ssc 0 .. ssc2
+	&ssc0_clk,
+	&ssc1_clk,
+	&ssc2_clk,
 	&tc0_clk,
 	&tc1_clk,
 	&tc2_clk,

arch/arm/mach-at91/at91sam9260.c

@@ -119,6 +119,11 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk ssc_clk = {
+	.name		= "ssc_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_SSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk tc0_clk = {
 	.name		= "tc0_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
@@ -193,7 +198,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&twi_clk,
 	&spi0_clk,
 	&spi1_clk,
-	// ssc
+	&ssc_clk,
 	&tc0_clk,
 	&tc1_clk,
 	&tc2_clk,

arch/arm/mach-at91/at91sam9261.c

@@ -97,6 +97,21 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc2_clk = {
+	.name		= "ssc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk tc0_clk = {
 	.name		= "tc0_clk",
 	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
@@ -135,7 +150,9 @@ static struct clk *periph_clocks[] __initdata = {
 	&twi_clk,
 	&spi0_clk,
 	&spi1_clk,
-	// ssc 0 .. ssc2
+	&ssc0_clk,
+	&ssc1_clk,
+	&ssc2_clk,
 	&tc0_clk,
 	&tc1_clk,
 	&tc2_clk,

arch/arm/mach-at91/at91sam9261_devices.c

@@ -430,9 +430,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
  *  LCD Controller
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = 0xffffffffUL;
-static struct at91fb_info lcdc_data;
+static struct atmel_lcdfb_info lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -455,7 +455,7 @@ static struct resource lcdc_resources[] = {
 };
 
 static struct platform_device at91_lcdc_device = {
-	.name		= "at91-fb",
+	.name		= "atmel_lcdfb",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &lcdc_dmamask,
@@ -466,7 +466,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct at91fb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 {
 	if (!data) {
 		return;
@@ -499,7 +499,7 @@ void __init at91_add_device_lcdc(struct at91fb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct at91fb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 #endif
 
 

arch/arm/mach-at91/at91sam9263.c

@@ -87,6 +87,11 @@ static struct clk mmc1_clk = {
 	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk can_clk = {
+	.name		= "can_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_CAN,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk twi_clk = {
 	.name		= "twi_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
@@ -102,16 +107,46 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+	.name		= "ac97_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_AC97C,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk tcb_clk = {
 	.name		= "tcb_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk pwmc_clk = {
+	.name		= "pwmc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PWMC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk macb_clk = {
 	.name		= "macb_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_DMA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twodge_clk = {
+	.name		= "2dge_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_2DGE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk udc_clk = {
 	.name		= "udc_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
@@ -142,20 +177,21 @@ static struct clk *periph_clocks[] __initdata = {
 	&usart2_clk,
 	&mmc0_clk,
 	&mmc1_clk,
-	// can
+	&can_clk,
 	&twi_clk,
 	&spi0_clk,
 	&spi1_clk,
-	// ssc0 .. ssc1
+	&ssc0_clk,
-	// ac97
+	&ssc1_clk,
+	&ac97_clk,
 	&tcb_clk,
-	// pwmc
+	&pwmc_clk,
 	&macb_clk,
-	// 2dge
+	&twodge_clk,
 	&udc_clk,
 	&isi_clk,
 	&lcdc_clk,
-	// dma
+	&dma_clk,
 	&ohci_clk,
 	// irq0 .. irq1
 };

arch/arm/mach-at91/at91sam9263_devices.c

@@ -572,6 +572,130 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+static u64 ac97_dmamask = 0xffffffffUL;
+static struct atmel_ac97_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_AC97C,
+		.end	= AT91SAM9263_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_AC97C,
+		.end	= AT91SAM9263_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_ac97_device = {
+	.name		= "ac97c",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PB0, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PB3, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *ek_data;
+	platform_device_register(&at91sam9263_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_LCDC_BASE,
+		.end	= AT91SAM9263_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_LCDC,
+		.end	= AT91SAM9263_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "atmel_lcdfb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
+	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
+	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  LEDs
  * -------------------------------------------------------------------- */

arch/arm/mach-at91/board-picotux200.c

@@ -0,0 +1,166 @@
+/*
+ * linux/arch/arm/mach-at91/board-picotux200.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Kleinhenz Elektronik GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata picotux200_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init picotux200_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&picotux200_uart_config);
+}
+
+static void __init picotux200_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata picotux200_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata picotux200_usbh_data = {
+	.ports		= 1,
+};
+
+// static struct at91_udc_data __initdata picotux200_udc_data = {
+// 	.vbus_pin	= AT91_PIN_PD4,
+// 	.pullup_pin	= AT91_PIN_PD5,
+// };
+
+static struct at91_mmc_data __initdata picotux200_mmc_data = {
+	.det_pin	= AT91_PIN_PB27,
+	.slot_b		= 0,
+	.wire4		= 1,
+	.wp_pin		= AT91_PIN_PA17,
+};
+
+// static struct spi_board_info picotux200_spi_devices[] = {
+// 	{	/* DataFlash chip */
+// 		.modalias	= "mtd_dataflash",
+// 		.chip_select	= 0,
+// 		.max_speed_hz	= 15 * 1000 * 1000,
+// 	},
+// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+// 	{	/* DataFlash card */
+// 		.modalias	= "mtd_dataflash",
+// 		.chip_select	= 3,
+// 		.max_speed_hz	= 15 * 1000 * 1000,
+// 	},
+// #endif
+// };
+
+#define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
+#define PICOTUX200_FLASH_SIZE	0x400000
+
+static struct physmap_flash_data picotux200_flash_data = {
+	.width	= 2,
+};
+
+static struct resource picotux200_flash_resource = {
+	.start		= PICOTUX200_FLASH_BASE,
+	.end		= PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device picotux200_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &picotux200_flash_data,
+			},
+	.resource	= &picotux200_flash_resource,
+	.num_resources	= 1,
+};
+
+static void __init picotux200_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&picotux200_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&picotux200_usbh_data);
+	/* USB Device */
+	// at91_add_device_udc(&picotux200_udc_data);
+	// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card */
+	at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+	/* MMC */
+	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
+	at91_add_device_mmc(0, &picotux200_mmc_data);
+#endif
+	/* NOR Flash */
+	platform_device_register(&picotux200_flash);
+}
+
+MACHINE_START(PICOTUX2XX, "picotux 200")
+	/* Maintainer: Kleinhenz Elektronik GmbH */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= picotux200_map_io,
+	.init_irq	= picotux200_init_irq,
+	.init_machine	= picotux200_board_init,
+MACHINE_END

arch/arm/mach-at91/board-sam9260ek.c

@@ -104,9 +104,9 @@ static struct spi_board_info ek_spi_devices[] = {
 	},
 #endif
 #endif
-#if defined(CONFIG_SND_AT73C213)
+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
 	{	/* AT73C213 DAC */
-		.modalias	= "snd_at73c213",
+		.modalias	= "at73c213",
 		.chip_select	= 0,
 		.max_speed_hz	= 10 * 1000 * 1000,
 		.bus_num	= 1,
@@ -118,7 +118,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata at91_eth_data ek_macb_data = {
+static struct at91_eth_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
@@ -140,7 +140,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	},
 };
 
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
 {
 	*num_partitions = ARRAY_SIZE(ek_nand_partition);
 	return ek_nand_partition;
@@ -188,6 +188,8 @@ static void __init ek_board_init(void)
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
+	/* I2C */
+	at91_add_device_i2c();
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")

arch/arm/mach-at91/board-sam9261ek.c

@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 #include <linux/dm9000.h>
 
 #include <asm/hardware.h>
@@ -194,6 +195,41 @@ static struct at91_nand_data __initdata ek_nand_data = {
 #endif
 };
 
+/*
+ * ADS7846 Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+static int ads7843_pendown_state(void)
+{
+	return !at91_get_gpio_value(AT91_PIN_PC2);	/* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7843,
+	.x_min			= 150,
+	.x_max			= 3830,
+	.y_min			= 190,
+	.y_max			= 3830,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 450,
+	.y_plate_ohms		= 250,
+	.pressure_max		= 15000,
+	.debounce_max		= 1,
+	.debounce_rep		= 0,
+	.debounce_tol		= (~0),
+	.get_pendown_state	= ads7843_pendown_state,
+};
+
+static void __init ek_add_device_ts(void)
+{
+	at91_set_B_periph(AT91_PIN_PC2, 1);	/* External IRQ0, with pullup */
+	at91_set_gpio_input(AT91_PIN_PA11, 1);	/* Touchscreen BUSY signal */
+}
+#else
+static void __init ek_add_device_ts(void) {}
+#endif
+
 /*
  * SPI devices
  */
@@ -204,6 +240,16 @@ static struct spi_board_info ek_spi_devices[] = {
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	},
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias	= "ads7846",
+		.chip_select	= 2,
+		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
+		.bus_num	= 0,
+		.platform_data	= &ads_info,
+		.irq		= AT91SAM9261_ID_IRQ0,
+	},
+#endif
 #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
 	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
 		.modalias	= "mtd_dataflash",
@@ -211,9 +257,9 @@ static struct spi_board_info ek_spi_devices[] = {
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	},
-#elif defined(CONFIG_SND_AT73C213)
+#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
 	{	/* AT73C213 DAC */
-		.modalias	= "snd_at73c213",
+		.modalias	= "at73c213",
 		.chip_select	= 3,
 		.max_speed_hz	= 10 * 1000 * 1000,
 		.bus_num	= 0,
@@ -241,6 +287,8 @@ static void __init ek_board_init(void)
 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* Touchscreen */
+	ek_add_device_ts();
 #else
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);

arch/arm/mach-at91/board-sam9263ek.c

@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -85,6 +86,40 @@ static struct at91_udc_data __initdata ek_udc_data = {
 };
 
 
+/*
+ * ADS7846 Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+	return !at91_get_gpio_value(AT91_PIN_PA15);	/* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7843,
+	.x_min			= 150,
+	.x_max			= 3830,
+	.y_min			= 190,
+	.y_max			= 3830,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 450,
+	.y_plate_ohms		= 250,
+	.pressure_max		= 15000,
+	.debounce_max		= 1,
+	.debounce_rep		= 0,
+	.debounce_tol		= (~0),
+	.get_pendown_state	= ads7843_pendown_state,
+};
+
+static void __init ek_add_device_ts(void)
+{
+	at91_set_B_periph(AT91_PIN_PA15, 1);	/* External IRQ1, with pullup */
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* Touchscreen BUSY signal */
+}
+#else
+static void __init ek_add_device_ts(void) {}
+#endif
+
 /*
  * SPI devices.
  */
@@ -97,6 +132,16 @@ static struct spi_board_info ek_spi_devices[] = {
 		.bus_num	= 0,
 	},
 #endif
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias	= "ads7846",
+		.chip_select	= 3,
+		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
+		.bus_num	= 0,
+		.platform_data	= &ads_info,
+		.irq		= AT91SAM9263_ID_IRQ1,
+	},
+#endif
 };
 
 
@@ -111,6 +156,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 };
 
 
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.is_rmii	= 1,
+};
+
+
 /*
  * NAND flash
  */
@@ -148,6 +201,14 @@ static struct at91_nand_data __initdata ek_nand_data = {
 };
 
 
+/*
+ * AC97
+ */
+static struct atmel_ac97_data ek_ac97_data = {
+	.reset_pin	= AT91_PIN_PA13,
+};
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -157,11 +218,20 @@ static void __init ek_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&ek_udc_data);
 	/* SPI */
+	at91_set_gpio_output(AT91_PIN_PE20, 1);		/* select spi0 clock */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* Touchscreen */
+	ek_add_device_ts();
 	/* MMC */
 	at91_add_device_mmc(1, &ek_mmc_data);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")

arch/arm/mach-ebsa110/io.c

@@ -102,6 +102,26 @@ EXPORT_SYMBOL(__readb);
 EXPORT_SYMBOL(__readw);
 EXPORT_SYMBOL(__readl);
 
+void readsw(void __iomem *addr, void *data, int len)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	BUG_ON((unsigned long)addr & 1);
+
+	__raw_readsw(a, data, len);
+}
+EXPORT_SYMBOL(readsw);
+
+void readsl(void __iomem *addr, void *data, int len)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	BUG_ON((unsigned long)addr & 3);
+
+	__raw_readsl(a, data, len);
+}
+EXPORT_SYMBOL(readsl);
+
 void __writeb(u8 val, void __iomem *addr)
 {
 	void __iomem *a = __isamem_convert_addr(addr);
@@ -137,6 +157,26 @@ EXPORT_SYMBOL(__writeb);
 EXPORT_SYMBOL(__writew);
 EXPORT_SYMBOL(__writel);
 
+void writesw(void __iomem *addr, void *data, int len)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	BUG_ON((unsigned long)addr & 1);
+
+	__raw_writesw(a, data, len);
+}
+EXPORT_SYMBOL(writesw);
+
+void writesl(void __iomem *addr, void *data, int len)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	BUG_ON((unsigned long)addr & 3);
+
+	__raw_writesl(a, data, len);
+}
+EXPORT_SYMBOL(writesl);
+
 #define SUPERIO_PORT(p) \
 	(((p) >> 3) == (0x3f8 >> 3) || \
 	 ((p) >> 3) == (0x2f8 >> 3) || \

arch/arm/mach-ep93xx/clock.c

@@ -27,6 +27,10 @@ struct clk {
 	u32		enable_mask;
 };
 
+static struct clk clk_uart = {
+	.name		= "UARTCLK",
+	.rate		= 14745600,
+};
 static struct clk clk_pll1 = {
 	.name		= "pll1",
 };
@@ -50,6 +54,7 @@ static struct clk clk_usb_host = {
 
 
 static struct clk *clocks[] = {
+	&clk_uart,
 	&clk_pll1,
 	&clk_f,
 	&clk_h,

arch/arm/mach-footbridge/dc21285.c

@@ -10,7 +10,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/ptrace.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
 #include <linux/slab.h>

arch/arm/mach-integrator/pci.c

@@ -23,7 +23,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/ptrace.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 

arch/arm/mach-integrator/pci_v3.c

@@ -22,7 +22,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>

arch/arm/mach-iop13xx/Makefile

@@ -7,5 +7,6 @@ obj-$(CONFIG_ARCH_IOP13XX) += setup.o
 obj-$(CONFIG_ARCH_IOP13XX) += irq.o
 obj-$(CONFIG_ARCH_IOP13XX) += pci.o
 obj-$(CONFIG_ARCH_IOP13XX) += io.o
+obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
 obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
 obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o

arch/arm/mach-iop13xx/io.c

@@ -41,7 +41,7 @@ void * __iomem __iop13xx_io(unsigned long io_addr)
 EXPORT_SYMBOL(__iop13xx_io);
 
 void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
-	unsigned long flags)
+	unsigned int mtype)
 {
 	void __iomem * retval;
 
@@ -61,9 +61,9 @@ void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
 			         (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
 		break;
 	case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
-		retval = __ioremap(IOP13XX_PBI_LOWER_MEM_PA +
+		retval = __arm_ioremap(IOP13XX_PBI_LOWER_MEM_PA +
 				       (cookie - IOP13XX_PBI_LOWER_MEM_RA),
-				  size, flags);
+				       size, mtype);
 		break;
 	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
 		retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
@@ -75,7 +75,7 @@ void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
 		retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
 		break;
 	default:
-		retval = __ioremap(cookie, size, flags);
+		retval = __arm_ioremap(cookie, size, mtype);
 	}
 
 	return retval;

arch/arm/mach-iop13xx/iq81340mc.c

@@ -75,11 +75,14 @@ static void __init iq81340mc_init(void)
 {
 	iop13xx_platform_init();
 	iq81340mc_pci_init();
+	iop13xx_add_tpmi_devices();
 }
 
 static void __init iq81340mc_timer_init(void)
 {
-	iop_init_time(400000000);
+	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
+	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+	iop_init_time(bus_freq);
 }
 
 static struct sys_timer iq81340mc_timer = {

arch/arm/mach-iop13xx/iq81340sc.c

@@ -77,11 +77,14 @@ static void __init iq81340sc_init(void)
 {
 	iop13xx_platform_init();
 	iq81340sc_pci_init();
+	iop13xx_add_tpmi_devices();
 }
 
 static void __init iq81340sc_timer_init(void)
 {
-	iop_init_time(400000000);
+	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
+	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+	iop_init_time(bus_freq);
 }
 
 static struct sys_timer iq81340sc_timer = {

arch/arm/mach-iop13xx/pci.c

@@ -88,9 +88,9 @@ void iop13xx_map_pci_memory(void)
 
 				if (end) {
 					iop13xx_atux_mem_base =
-					(u32) __ioremap_pfn(
+					(u32) __arm_ioremap_pfn(
 					__phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
-					, 0, iop13xx_atux_mem_size, 0);
+					, 0, iop13xx_atux_mem_size, MT_DEVICE);
 					if (!iop13xx_atux_mem_base) {
 						printk("%s: atux allocation "
 						       "failed\n", __FUNCTION__);
@@ -114,9 +114,9 @@ void iop13xx_map_pci_memory(void)
 
 				if (end) {
 					iop13xx_atue_mem_base =
-					(u32) __ioremap_pfn(
+					(u32) __arm_ioremap_pfn(
 					__phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
-					, 0, iop13xx_atue_mem_size, 0);
+					, 0, iop13xx_atue_mem_size, MT_DEVICE);
 					if (!iop13xx_atue_mem_base) {
 						printk("%s: atue allocation "
 						       "failed\n", __FUNCTION__);
@@ -1023,7 +1023,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 				  << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
 		__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
 
-		res[0].start = IOP13XX_PCIX_LOWER_IO_PA;
+		res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
 		res[0].end   = IOP13XX_PCIX_UPPER_IO_PA;
 		res[0].name  = "IQ81340 ATUX PCI I/O Space";
 		res[0].flags = IORESOURCE_IO;
@@ -1033,7 +1033,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 		res[1].name  = "IQ81340 ATUX PCI Memory Space";
 		res[1].flags = IORESOURCE_MEM;
 		sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIX_IO_OFFSET;
+		sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
 		break;
 	case IOP13XX_INIT_ATU_ATUE:
 		/* Note: the function number field in the PCSR is ro */
@@ -1044,7 +1044,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 
 		__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
 
-		res[0].start = IOP13XX_PCIE_LOWER_IO_PA;
+		res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
 		res[0].end   = IOP13XX_PCIE_UPPER_IO_PA;
 		res[0].name  = "IQ81340 ATUE PCI I/O Space";
 		res[0].flags = IORESOURCE_IO;
@@ -1054,7 +1054,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 		res[1].name  = "IQ81340 ATUE PCI Memory Space";
 		res[1].flags = IORESOURCE_MEM;
 		sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIE_IO_OFFSET;
+		sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
 		sys->map_irq = iop13xx_pcie_map_irq;
 		break;
 	default:

arch/arm/mach-iop13xx/setup.c

@@ -258,15 +258,11 @@ void __init iop13xx_platform_init(void)
 
 	if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
 		switch (iop13xx_dev_id()) {
-		/* enable both uarts on iop341 and iop342 */
+		/* enable both uarts on iop341 */
 		case 0x3380:
 		case 0x3384:
 		case 0x3388:
 		case 0x338c:
-		case 0x3382:
-		case 0x3386:
-		case 0x338a:
-		case 0x338e:
 			init_uart |= IOP13XX_INIT_UART_0;
 			init_uart |= IOP13XX_INIT_UART_1;
 			break;

arch/arm/mach-iop13xx/tpmi.c

@@ -0,0 +1,234 @@
+/*
+ * iop13xx tpmi device resources
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+/* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */
+#define IOP13XX_TPMI_MMR(dev) 	IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12))
+#define IOP13XX_TPMI_MEM(dev) 	IOP13XX_REG_ADDR32_PHYS(0x60000 + (dev << 13))
+#define IOP13XX_TPMI_CTRL(dev)	IOP13XX_REG_ADDR32_PHYS(0x50000 + (dev << 10))
+#define IOP13XX_TPMI_MMR_SIZE	    (SZ_4K - 1)
+#define IOP13XX_TPMI_MEM_SIZE	    (255)
+#define IOP13XX_TPMI_MEM_CTRL	    (SZ_1K - 1)
+#define IOP13XX_TPMI_RESOURCE_MMR  0
+#define IOP13XX_TPMI_RESOURCE_MEM  1
+#define IOP13XX_TPMI_RESOURCE_CTRL 2
+#define IOP13XX_TPMI_RESOURCE_IRQ  3
+
+static struct resource iop13xx_tpmi_0_resources[] = {
+	[IOP13XX_TPMI_RESOURCE_MMR] = {
+		.start = IOP13XX_TPMI_MMR(4), /* tpmi0 starts at dev == 4 */
+		.end = IOP13XX_TPMI_MMR(4) + IOP13XX_TPMI_MMR_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_MEM] = {
+		.start = IOP13XX_TPMI_MEM(0),
+		.end = IOP13XX_TPMI_MEM(0) + IOP13XX_TPMI_MEM_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_CTRL] = {
+		.start = IOP13XX_TPMI_CTRL(0),
+		.end = IOP13XX_TPMI_CTRL(0) + IOP13XX_TPMI_MEM_CTRL,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_IRQ] = {
+		.start = IRQ_IOP13XX_TPMI0_OUT,
+		.end = IRQ_IOP13XX_TPMI0_OUT,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_tpmi_1_resources[] = {
+	[IOP13XX_TPMI_RESOURCE_MMR] = {
+		.start = IOP13XX_TPMI_MMR(1),
+		.end = IOP13XX_TPMI_MMR(1) + IOP13XX_TPMI_MMR_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_MEM] = {
+		.start = IOP13XX_TPMI_MEM(1),
+		.end = IOP13XX_TPMI_MEM(1) + IOP13XX_TPMI_MEM_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_CTRL] = {
+		.start = IOP13XX_TPMI_CTRL(1),
+		.end = IOP13XX_TPMI_CTRL(1) + IOP13XX_TPMI_MEM_CTRL,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_IRQ] = {
+		.start = IRQ_IOP13XX_TPMI1_OUT,
+		.end = IRQ_IOP13XX_TPMI1_OUT,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_tpmi_2_resources[] = {
+	[IOP13XX_TPMI_RESOURCE_MMR] = {
+		.start = IOP13XX_TPMI_MMR(2),
+		.end = IOP13XX_TPMI_MMR(2) + IOP13XX_TPMI_MMR_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_MEM] = {
+		.start = IOP13XX_TPMI_MEM(2),
+		.end = IOP13XX_TPMI_MEM(2) + IOP13XX_TPMI_MEM_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_CTRL] = {
+		.start = IOP13XX_TPMI_CTRL(2),
+		.end = IOP13XX_TPMI_CTRL(2) + IOP13XX_TPMI_MEM_CTRL,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_IRQ] = {
+		.start = IRQ_IOP13XX_TPMI2_OUT,
+		.end = IRQ_IOP13XX_TPMI2_OUT,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_tpmi_3_resources[] = {
+	[IOP13XX_TPMI_RESOURCE_MMR] = {
+		.start = IOP13XX_TPMI_MMR(3),
+		.end = IOP13XX_TPMI_MMR(3) + IOP13XX_TPMI_MMR_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_MEM] = {
+		.start = IOP13XX_TPMI_MEM(3),
+		.end = IOP13XX_TPMI_MEM(3) + IOP13XX_TPMI_MEM_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_CTRL] = {
+		.start = IOP13XX_TPMI_CTRL(3),
+		.end = IOP13XX_TPMI_CTRL(3) + IOP13XX_TPMI_MEM_CTRL,
+		.flags = IORESOURCE_MEM,
+	},
+	[IOP13XX_TPMI_RESOURCE_IRQ] = {
+		.start = IRQ_IOP13XX_TPMI3_OUT,
+		.end = IRQ_IOP13XX_TPMI3_OUT,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+u64 iop13xx_tpmi_mask = DMA_64BIT_MASK;
+static struct platform_device iop13xx_tpmi_0_device = {
+	.name = "iop-tpmi",
+	.id = 0,
+	.num_resources = 4,
+	.resource = iop13xx_tpmi_0_resources,
+	.dev = {
+		.dma_mask          = &iop13xx_tpmi_mask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+	},
+};
+
+static struct platform_device iop13xx_tpmi_1_device = {
+	.name = "iop-tpmi",
+	.id = 1,
+	.num_resources = 4,
+	.resource = iop13xx_tpmi_1_resources,
+	.dev = {
+		.dma_mask          = &iop13xx_tpmi_mask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+	},
+};
+
+static struct platform_device iop13xx_tpmi_2_device = {
+	.name = "iop-tpmi",
+	.id = 2,
+	.num_resources = 4,
+	.resource = iop13xx_tpmi_2_resources,
+	.dev = {
+		.dma_mask          = &iop13xx_tpmi_mask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+	},
+};
+
+static struct platform_device iop13xx_tpmi_3_device = {
+	.name = "iop-tpmi",
+	.id = 3,
+	.num_resources = 4,
+	.resource = iop13xx_tpmi_3_resources,
+	.dev = {
+		.dma_mask          = &iop13xx_tpmi_mask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+	},
+};
+
+__init void iop13xx_add_tpmi_devices(void)
+{
+	unsigned short device_id;
+
+	/* tpmi's not present on iop341 or iop342 */
+	if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
+		/* ATUE must be present */
+		device_id = __raw_readw(IOP13XX_ATUE_DID);
+	else
+		/* ATUX must be present */
+		device_id = __raw_readw(IOP13XX_ATUX_DID);
+
+	switch (device_id) {
+	/* iop34[1|2] 0-tpmi */
+	case 0x3380:
+	case 0x3384:
+	case 0x3388:
+	case 0x338c:
+	case 0x3382:
+	case 0x3386:
+	case 0x338a:
+	case 0x338e:
+		return;
+	/* iop348 1-tpmi */
+	case 0x3310:
+	case 0x3312:
+	case 0x3314:
+	case 0x3318:
+	case 0x331a:
+	case 0x331c:
+	case 0x33c0:
+	case 0x33c2:
+	case 0x33c4:
+	case 0x33c8:
+	case 0x33ca:
+	case 0x33cc:
+	case 0x33b0:
+	case 0x33b2:
+	case 0x33b4:
+	case 0x33b8:
+	case 0x33ba:
+	case 0x33bc:
+	case 0x3320:
+	case 0x3322:
+	case 0x3324:
+	case 0x3328:
+	case 0x332a:
+	case 0x332c:
+		platform_device_register(&iop13xx_tpmi_0_device);
+		return;
+	default:
+		platform_device_register(&iop13xx_tpmi_0_device);
+		platform_device_register(&iop13xx_tpmi_1_device);
+		platform_device_register(&iop13xx_tpmi_2_device);
+		platform_device_register(&iop13xx_tpmi_3_device);
+		return;
+	}
+}

arch/arm/mach-iop32x/Kconfig

@@ -34,6 +34,14 @@ config MACH_N2100
 	  Say Y here if you want to run your kernel on the Thecus n2100
 	  NAS appliance.
 
+config IOP3XX_ATU
+        bool "Enable the PCI Controller"
+        default y
+        help
+          Say Y here if you want the IOP to initialize its PCI Controller.
+          Say N if the IOP is an add in card, the host system owns the PCI
+          bus in this case.
+
 endmenu
 
 endif

arch/arm/mach-iop32x/iq31244.c

@@ -178,9 +178,10 @@ static struct hw_pci iq31244_pci __initdata = {
 
 static int __init iq31244_pci_init(void)
 {
-	if (is_ep80219())
+	if (is_ep80219()) {
+		if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE)
 			pci_common_init(&ep80219_pci);
-	else if (machine_is_iq31244()) {
+	} else if (machine_is_iq31244()) {
 		if (is_80219()) {
 			printk("note: iq31244 board type has been selected\n");
 			printk("note: to select ep80219 operation:\n");
@@ -189,6 +190,8 @@ static int __init iq31244_pci_init(void)
 			printk("\t2/ update boot loader to pass"
 				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
 		}
+
+		if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE)
 			pci_common_init(&iq31244_pci);
 	}
 

arch/arm/mach-iop32x/iq80321.c

@@ -113,7 +113,8 @@ static struct hw_pci iq80321_pci __initdata = {
 
 static int __init iq80321_pci_init(void)
 {
-	if (machine_is_iq80321())
+	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+		machine_is_iq80321())
 		pci_common_init(&iq80321_pci);
 
 	return 0;

arch/arm/mach-iop33x/Kconfig

@@ -16,6 +16,14 @@ config MACH_IQ80332
 	  Say Y here if you want to run your kernel on the Intel IQ80332
 	  evaluation kit for the IOP332 chipset.
 
+config IOP3XX_ATU
+	bool "Enable the PCI Controller"
+	default y
+	help
+	  Say Y here if you want the IOP to initialize its PCI Controller.
+	  Say N if the IOP is an add in card, the host system owns the PCI
+	  bus in this case.
+
 endmenu
 
 endif

arch/arm/mach-iop33x/iq80331.c

@@ -96,7 +96,8 @@ static struct hw_pci iq80331_pci __initdata = {
 
 static int __init iq80331_pci_init(void)
 {
-	if (machine_is_iq80331())
+	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+		machine_is_iq80331())
 		pci_common_init(&iq80331_pci);
 
 	return 0;

arch/arm/mach-iop33x/iq80332.c

@@ -96,7 +96,8 @@ static struct hw_pci iq80332_pci __initdata = {
 
 static int __init iq80332_pci_init(void)
 {
-	if (machine_is_iq80332())
+	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+		machine_is_iq80332())
 		pci_common_init(&iq80332_pci);
 
 	return 0;

arch/arm/mach-ixp2000/core.c

@@ -84,59 +84,59 @@ static struct map_desc ixp2000_io_desc[] __initdata = {
 		.virtual	= IXP2000_CAP_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
 		.length		= IXP2000_CAP_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_INTCTL_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
 		.length		= IXP2000_INTCTL_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_PCI_CREG_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
 		.length		= IXP2000_PCI_CREG_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_PCI_CSR_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
 		.length		= IXP2000_PCI_CSR_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_MSF_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
 		.length		= IXP2000_MSF_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_SCRATCH_RING_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
 		.length		= IXP2000_SCRATCH_RING_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_SRAM0_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
 		.length		= IXP2000_SRAM0_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_PCI_IO_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
 		.length		= IXP2000_PCI_IO_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_PCI_CFG0_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG0_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= IXP2000_PCI_CFG1_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG1_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}
 };
 
 void __init ixp2000_map_io(void)
 {
 	/*
-	 * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that
+	 * On IXP2400 CPUs we need to use MT_DEVICE_IXP2000 so that
 	 * XCB=101 (to avoid triggering erratum #66), and given that
 	 * this mode speeds up I/O accesses and we have write buffer
 	 * flushes in the right places anyway, it doesn't hurt to use

arch/arm/mach-ixp2000/enp2611.c

@@ -70,17 +70,17 @@ static struct map_desc enp2611_io_desc[] __initdata = {
 		.virtual	= ENP2611_CALEB_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
 		.length		= ENP2611_CALEB_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
 		.length		= ENP2611_PM3386_0_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}, {
 		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
 		.length		= ENP2611_PM3386_1_SIZE,
-		.type		= MT_IXP2000_DEVICE,
+		.type		= MT_DEVICE_IXP2000,
 	}
 };
 

arch/arm/mach-ixp4xx/Kconfig

@@ -62,6 +62,12 @@ config MACH_IXDP465
 	  IXDP465 Development Platform (Also known as BMP).
 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_KIXRP435
+	bool "KIXRP435"
+	help
+	  Say 'Y' here if you want your kernel to support Intel's
+	  KIXRP435 Reference Platform.
+	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
 #
 # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
@@ -89,12 +95,21 @@ config MACH_NAS100D
 	  NAS 100d device. For more information on this platform,
 	  see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
 
+config MACH_DSMG600
+	bool
+	prompt "D-Link DSM-G600 RevA"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support D-Link's
+	  DSM-G600 RevA device. For more information on this platform,
+	  see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
+
 #
 # Avila and IXDP share the same source for now. Will change in future
 #
 config	ARCH_IXDP4XX
 	bool
-	depends on ARCH_IXDP425 || MACH_IXDP465
+	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
 	default y
 
 #
@@ -105,6 +120,11 @@ config CPU_IXP46X
 	depends on MACH_IXDP465
 	default y
 
+config CPU_IXP43X
+	bool
+	depends on MACH_KIXRP435
+	default y
+
 config MACH_GTWX5715
 	bool "Gemtek WX5715 (Linksys WRV54G)"
 	depends on ARCH_IXP4XX

arch/arm/mach-ixp4xx/Makefile

@@ -12,6 +12,7 @@ obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
 obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-pci.o
 obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
+obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
 
 obj-y	+= common.o
 
@@ -22,5 +23,6 @@ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
 obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o nslu2-power.o
 obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o nas100d-power.o
+obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o

arch/arm/mach-ixp4xx/common-pci.c

@@ -374,7 +374,7 @@ void __init ixp4xx_pci_preinit(void)
 	 * Determine which PCI read method to use.
 	 * Rev 0 IXP425 requires workaround.
 	 */
-	if (!(processor_id & 0xf) && !cpu_is_ixp46x()) {
+	if (!(processor_id & 0xf) && cpu_is_ixp42x()) {
 		printk("PCI: IXP42x A0 silicon detected - "
 			"PCI Non-Prefetch Workaround Enabled\n");
 		ixp4xx_pci_read = ixp4xx_pci_read_errata;
@@ -480,7 +480,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	res[0].flags = IORESOURCE_IO;
 
 	res[1].name = "PCI Memory Space";
-	res[1].start = 0x48000000;
+	res[1].start = PCIBIOS_MIN_MEM;
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 	res[1].end = 0x4bffffff;
 #else

arch/arm/mach-ixp4xx/common.c

@@ -27,6 +27,7 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/arch/udc.h>
 #include <asm/hardware.h>
@@ -41,6 +42,8 @@
 #include <asm/mach/time.h>
 
 static int __init ixp4xx_clocksource_init(void);
+static int __init ixp4xx_clockevent_init(void);
+static struct clock_event_device clockevent_ixp4xx;
 
 /*************************************************************************
  * IXP4xx chipset I/O mapping
@@ -102,6 +105,29 @@ static signed char irq2gpio[32] = {
 	 7,  8,  9, 10, 11, 12, -1, -1,
 };
 
+int gpio_to_irq(int gpio)
+{
+	int irq;
+
+	for (irq = 0; irq < 32; irq++) {
+		if (irq2gpio[irq] == gpio)
+			return irq;
+	}
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(int irq)
+{
+	int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
+
+	if (gpio == -1)
+		return -EINVAL;
+
+	return gpio;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
 static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 {
 	int line = irq2gpio[irq];
@@ -169,7 +195,7 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 
 static void ixp4xx_irq_mask(unsigned int irq)
 {
-	if (cpu_is_ixp46x() && irq >= 32)
+	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32)
 		*IXP4XX_ICMR2 &= ~(1 << (irq - 32));
 	else
 		*IXP4XX_ICMR &= ~(1 << irq);
@@ -192,7 +218,7 @@ static void ixp4xx_irq_unmask(unsigned int irq)
 	if (!(ixp4xx_irq_edge & (1 << irq)))
 		ixp4xx_irq_ack(irq);
 
-	if (cpu_is_ixp46x() && irq >= 32)
+	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32)
 		*IXP4XX_ICMR2 |= (1 << (irq - 32));
 	else
 		*IXP4XX_ICMR |= (1 << irq);
@@ -216,7 +242,7 @@ void __init ixp4xx_init_irq(void)
 	/* Disable all interrupt */
 	*IXP4XX_ICMR = 0x0; 
 
-	if (cpu_is_ixp46x()) {
+	if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
 		/* Route upper 32 sources to IRQ instead of FIQ */
 		*IXP4XX_ICLR2 = 0x00;
 
@@ -239,52 +265,40 @@ void __init ixp4xx_init_irq(void)
  * counter as a source of real clock ticks to account for missed jiffies.
  *************************************************************************/
 
-static unsigned volatile last_jiffy_time;
-
-#define CLOCK_TICKS_PER_USEC	((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-
 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
 {
-	write_seqlock(&xtime_lock);
+	struct clock_event_device *evt = &clockevent_ixp4xx;
 
 	/* Clear Pending Interrupt by writing '1' to it */
 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
 
-	/*
+	evt->event_handler(evt);
-	 * Catch up with the real idea of time
-	 */
-	while ((signed long)(*IXP4XX_OSTS - last_jiffy_time) >= LATCH) {
-		timer_tick();
-		last_jiffy_time += LATCH;
-	}
-
-	write_sequnlock(&xtime_lock);
 
 	return IRQ_HANDLED;
 }
 
 static struct irqaction ixp4xx_timer_irq = {
-	.name		= "IXP4xx Timer Tick",
+	.name		= "timer1",
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 	.handler	= ixp4xx_timer_interrupt,
 };
 
 static void __init ixp4xx_timer_init(void)
 {
+	/* Reset/disable counter */
+	*IXP4XX_OSRT1 = 0;
+
 	/* Clear Pending Interrupt by writing '1' to it */
 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
 
-	/* Setup the Timer counter value */
-	*IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-
 	/* Reset time-stamp counter */
 	*IXP4XX_OSTS = 0;
-	last_jiffy_time = 0;
 
 	/* Connect the interrupt handler and enable the interrupt */
 	setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
 
 	ixp4xx_clocksource_init();
+	ixp4xx_clockevent_init();
 }
 
 struct sys_timer ixp4xx_timer = {
@@ -384,6 +398,9 @@ void __init ixp4xx_sys_init(void)
 			ixp4xx_exp_bus_size >> 20);
 }
 
+/*
+ * clocksource
+ */
 cycle_t ixp4xx_get_cycles(void)
 {
 	return *IXP4XX_OSTS;
@@ -408,3 +425,64 @@ static int __init ixp4xx_clocksource_init(void)
 
 	return 0;
 }
+
+/*
+ * clockevents
+ */
+static int ixp4xx_set_next_event(unsigned long evt,
+				 struct clock_event_device *unused)
+{
+	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
+
+	*IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts;
+
+	return 0;
+}
+
+static void ixp4xx_set_mode(enum clock_event_mode mode,
+			    struct clock_event_device *evt)
+{
+	unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK;
+ 		opts = IXP4XX_OST_ENABLE;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set by 'set next_event' */
+		osrt = 0;
+		opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	default:
+		osrt = opts = 0;
+		break;
+	}
+
+	*IXP4XX_OSRT1 = osrt | opts;
+}
+
+static struct clock_event_device clockevent_ixp4xx = {
+	.name		= "ixp4xx timer1",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating         = 200,
+	.shift		= 24,
+	.set_mode	= ixp4xx_set_mode,
+	.set_next_event	= ixp4xx_set_next_event,
+};
+
+static int __init ixp4xx_clockevent_init(void)
+{
+	clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
+					clockevent_ixp4xx.shift);
+	clockevent_ixp4xx.max_delta_ns =
+		clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);
+	clockevent_ixp4xx.min_delta_ns =
+		clockevent_delta2ns(0xf, &clockevent_ixp4xx);
+	clockevent_ixp4xx.cpumask = cpumask_of_cpu(0);
+
+	clockevents_register_device(&clockevent_ixp4xx);
+	return 0;
+}

arch/arm/mach-ixp4xx/dsmg600-pci.c

@@ -0,0 +1,74 @@
+/*
+ * DSM-G600 board-level PCI initialization
+ *
+ * Copyright (C) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init dsmg600_pci_preinit(void)
+{
+	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
+	{
+		{ IRQ_DSMG600_PCI_INTE, -1, -1 },
+		{ IRQ_DSMG600_PCI_INTA, -1, -1 },
+		{ IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
+		{ IRQ_DSMG600_PCI_INTF, -1, -1 },
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
+		pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
+		irq = pci_irq_table[slot-1][pin-1];
+
+	return irq;
+}
+
+struct hw_pci __initdata dsmg600_pci = {
+	.nr_controllers = 1,
+	.preinit	= dsmg600_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= dsmg600_map_irq,
+};
+
+int __init dsmg600_pci_init(void)
+{
+	if (machine_is_dsmg600())
+		pci_common_init(&dsmg600_pci);
+
+	return 0;
+}
+
+subsys_initcall(dsmg600_pci_init);

arch/arm/mach-ixp4xx/dsmg600-power.c

@@ -0,0 +1,125 @@
+/*
+ * arch/arm/mach-ixp4xx/dsmg600-power.c
+ *
+ * DSM-G600 Power/Reset driver
+ * Author: Michael Westerhof <mwester@dls.net>
+ *
+ * Based on nslu2-power.c
+ *  Copyright (C) 2005 Tower Technologies
+ *  Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * which was based on nslu2-io.c
+ *  Copyright (C) 2004 Karen Spearel
+ *
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+
+#include <asm/mach-types.h>
+
+extern void ctrl_alt_del(void);
+
+/* This is used to make sure the power-button pusher is serious.  The button
+ * must be held until the value of this counter reaches zero.
+ */
+static volatile int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void dsmg600_power_handler(unsigned long data);
+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
+
+static void dsmg600_power_handler(unsigned long data)
+{
+	/* This routine is called twice per second to check the
+	 * state of the power button.
+	 */
+
+	if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
+
+		/* IO Pin is 1 (button pushed) */
+		if (power_button_countdown == 0) {
+			/* Signal init to do the ctrlaltdel action, this will bypass
+			 * init if it hasn't started and do a kernel_restart.
+			 */
+			ctrl_alt_del();
+
+			/* Change the state of the power LED to "blink" */
+			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+		}
+		power_button_countdown--;
+
+	} else {
+		power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+	}
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly. */
+	machine_power_off();
+
+	return IRQ_HANDLED;
+}
+
+static int __init dsmg600_power_init(void)
+{
+	if (!(machine_is_dsmg600()))
+		return 0;
+
+	if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
+		NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			DSMG600_RB_IRQ);
+
+		return -EIO;
+	}
+
+	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+
+	return 0;
+}
+
+static void __exit dsmg600_power_exit(void)
+{
+	if (!(machine_is_dsmg600()))
+		return;
+
+	del_timer_sync(&dsmg600_power_timer);
+
+	free_irq(DSMG600_RB_IRQ, NULL);
+}
+
+module_init(dsmg600_power_init);
+module_exit(dsmg600_power_exit);
+
+MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
+MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
+MODULE_LICENSE("GPL");

arch/arm/mach-ixp4xx/dsmg600-setup.c

@@ -0,0 +1,175 @@
+/*
+ * DSM-G600 board-setup
+ *
+ * Copyright (C) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data dsmg600_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 2,
+};
+
+static struct resource dsmg600_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device dsmg600_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev.platform_data	= &dsmg600_flash_data,
+	.num_resources		= 1,
+	.resource		= &dsmg600_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
+	.sda_pin		= DSMG600_SDA_PIN,
+	.scl_pin		= DSMG600_SCL_PIN,
+};
+
+static struct platform_device dsmg600_i2c_controller = {
+	.name			= "IXP4XX-I2C",
+	.id			= 0,
+	.dev.platform_data	= &dsmg600_i2c_gpio_pins,
+};
+
+#ifdef CONFIG_LEDS_CLASS
+static struct resource dsmg600_led_resources[] = {
+	{
+		.name           = "power",
+		.start          = DSMG600_LED_PWR_GPIO,
+		.end            = DSMG600_LED_PWR_GPIO,
+		.flags          = IXP4XX_GPIO_HIGH,
+	},
+	{
+		.name           = "wlan",
+		.start		= DSMG600_LED_WLAN_GPIO,
+		.end            = DSMG600_LED_WLAN_GPIO,
+		.flags          = IXP4XX_GPIO_LOW,
+	},
+};
+
+static struct platform_device dsmg600_leds = {
+        .name                   = "IXP4XX-GPIO-LED",
+        .id                     = -1,
+        .num_resources          = ARRAY_SIZE(dsmg600_led_resources),
+        .resource               = dsmg600_led_resources,
+};
+#endif
+
+static struct resource dsmg600_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port dsmg600_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ }
+};
+
+static struct platform_device dsmg600_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= dsmg600_uart_data,
+	.num_resources		= ARRAY_SIZE(dsmg600_uart_resources),
+	.resource		= dsmg600_uart_resources,
+};
+
+static struct platform_device *dsmg600_devices[] __initdata = {
+	&dsmg600_i2c_controller,
+	&dsmg600_flash,
+};
+
+static void dsmg600_power_off(void)
+{
+	/* enable the pwr cntl gpio */
+	gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
+
+	/* poweroff */
+	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
+}
+
+static void __init dsmg600_init(void)
+{
+	ixp4xx_sys_init();
+
+	/* Make sure that GPIO14 and GPIO15 are not used as clocks */
+	*IXP4XX_GPIO_GPCLKR = 0;
+
+	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	dsmg600_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	pm_power_off = dsmg600_power_off;
+
+	/* The UART is required on the DSM-G600 (Redboot cannot use the
+	 * NIC) -- do it here so that it does *not* get removed if
+	 * platform_add_devices fails!
+         */
+        (void)platform_device_register(&dsmg600_uart);
+
+	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
+
+#ifdef CONFIG_LEDS_CLASS
+        /* We don't care whether or not this works. */
+        (void)platform_device_register(&dsmg600_leds);
+#endif
+}
+
+static void __init dsmg600_fixup(struct machine_desc *desc,
+                struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+       /* The xtal on this machine is non-standard. */
+        ixp4xx_timer_freq = DSMG600_FREQ;
+}
+
+MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
+	/* Maintainer: www.nslu2-linux.org */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.fixup          = dsmg600_fixup,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= dsmg600_init,
+MACHINE_END

arch/arm/mach-ixp4xx/ixdp425-pci.c

@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
 int __init ixdp425_pci_init(void)
 {
 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-			machine_is_ixdp465())
+			machine_is_ixdp465() || machine_is_kixrp435())
 		pci_common_init(&ixdp425_pci);
 	return 0;
 }

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -115,6 +115,11 @@ static void __init ixdp425_init(void)
 	ixdp425_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
+	if (cpu_is_ixp43x()) {
+		ixdp425_uart.num_resources = 1;
+		ixdp425_uart_data[1].flags = 0;
+	}
+
 	platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
 }
 
@@ -156,3 +161,16 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.init_machine	= ixdp425_init,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_KIXRP435
+MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= ixdp425_init,
+MACHINE_END
+#endif

arch/arm/mach-lh7a40x/irq-lh7a400.c

@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/ptrace.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-lh7a40x/irq-lh7a404.c

@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/ptrace.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-lh7a40x/irq-lpd7a40x.c

@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/ptrace.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-ns9xxx/Kconfig

@@ -10,12 +10,23 @@ config MACH_CC9P9360DEV
 	  Say Y here if you are using the Digi ConnectCore 9P 9360
 	  on an A9M9750 Development Board.
 
+config MACH_CC9P9360JS
+	bool "ConnectCore 9P 9360 on a JSCC9P9360 Devboard"
+	select PROCESSOR_NS9360
+	select BOARD_JSCC9P9360
+	help
+	  Say Y here if you are using the Digi ConnectCore 9P 9360
+	  on an JSCC9P9360 Development Board.
+
 config PROCESSOR_NS9360
 	bool
 
 config BOARD_A9M9750DEV
 	bool
 
+config BOARD_JSCC9P9360
+	bool
+
 endmenu
 
 endif

arch/arm/mach-ns9xxx/Makefile

@@ -3,3 +3,4 @@ obj-y := irq.o time.o generic.o
 obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
 
 obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
+obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o

arch/arm/mach-ns9xxx/board-jscc9p9360.c

@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-ns9xxx/board-jscc9p9360.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include "board-jscc9p9360.h"
+
+void __init board_jscc9p9360_init_machine(void)
+{
+	/* TODO: reserve GPIOs for push buttons, etc pp */
+}
+

arch/arm/mach-ns9xxx/board-jscc9p9360.h

@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-ns9xxx/board-jscc9p9360.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/init.h>
+
+void __init board_jscc9p9360_init_machine(void);

arch/arm/mach-ns9xxx/mach-cc9p9360js.c

@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "board-jscc9p9360.h"
+#include "generic.h"
+
+static void __init mach_cc9p9360js_init_machine(void)
+{
+	ns9xxx_init_machine();
+	board_jscc9p9360_init_machine();
+}
+
+MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard")
+	.map_io = ns9xxx_map_io,
+	.init_irq = ns9xxx_init_irq,
+	.init_machine = mach_cc9p9360js_init_machine,
+	.timer = &ns9xxx_timer,
+	.boot_params = 0x100,
+MACHINE_END

arch/arm/mach-omap1/irq.c

@@ -40,7 +40,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
-#include <linux/ptrace.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-omap1/time.c

@@ -39,6 +39,10 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
@@ -48,13 +52,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-struct sys_timer omap_timer;
 
-/*
- * ---------------------------------------------------------------------------
- * MPU timer
- * ---------------------------------------------------------------------------
- */
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
@@ -88,21 +86,6 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc)
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-/*
- * MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs
- * will break. On P2, the timer count rate is 6.5 MHz after programming PTV
- * with 0. This divides the 13MHz input by 2, and is undocumented.
- */
-#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
-/* REVISIT: This ifdef construct should be replaced by a query to clock
- * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
- */
-#define MPU_TICKS_PER_SEC		(13000000 / 2)
-#else
-#define MPU_TICKS_PER_SEC		(12000000 / 2)
-#endif
-
-#define MPU_TIMER_TICK_PERIOD		((MPU_TICKS_PER_SEC / HZ) - 1)
 
 typedef struct {
 	u32 cntl;			/* CNTL_TIMER, R/W */
@@ -120,98 +103,164 @@ static inline unsigned long omap_mpu_timer_read(int nr)
 	return timer->read_tim;
 }
 
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+static inline void omap_mpu_set_autoreset(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
+	timer->cntl = timer->cntl | MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_remove_autoreset(int nr)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+	timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+
+	if (autoreset) timerflags |= MPU_TIMER_AR;
+
 	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
 	udelay(1);
 	timer->load_tim = load_val;
         udelay(1);
-	timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+	timer->cntl = timerflags;
-}
-
-unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks)
-{
-	unsigned long long nsec;
-
-	nsec = cycles_2_ns((unsigned long long)nr_ticks);
-	return (unsigned long)nsec / 1000;
 }
 
 /*
- * Last processed system timer interrupt
+ * ---------------------------------------------------------------------------
+ * MPU timer 1 ... count down to zero, interrupt, reload
+ * ---------------------------------------------------------------------------
  */
-static unsigned long omap_mpu_timer_last = 0;
+static int omap_mpu_set_next_event(unsigned long cycles,
-
+				    struct clock_event_device *evt)
-/*
- * Returns elapsed usecs since last system timer interrupt
- */
-static unsigned long omap_mpu_timer_gettimeoffset(void)
 {
-	unsigned long now = 0 - omap_mpu_timer_read(0);
+	omap_mpu_timer_start(0, cycles, 0);
-	unsigned long elapsed = now - omap_mpu_timer_last;
+	return 0;
-
-	return omap_mpu_timer_ticks_to_usecs(elapsed);
 }
 
-/*
+static void omap_mpu_set_mode(enum clock_event_mode mode,
- * Elapsed time between interrupts is calculated using timer0.
+			      struct clock_event_device *evt)
- * Latency during the interrupt is calculated using timer1.
- * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
- */
-static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now, latency;
+	switch (mode) {
-
+	case CLOCK_EVT_MODE_PERIODIC:
-	write_seqlock(&xtime_lock);
+		omap_mpu_set_autoreset(0);
-	now = 0 - omap_mpu_timer_read(0);
+		break;
-	latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
+	case CLOCK_EVT_MODE_ONESHOT:
-	omap_mpu_timer_last = now - latency;
+		omap_mpu_remove_autoreset(0);
-	timer_tick();
+		break;
-	write_sequnlock(&xtime_lock);
+	case CLOCK_EVT_MODE_UNUSED:
-
+	case CLOCK_EVT_MODE_SHUTDOWN:
-	return IRQ_HANDLED;
+		break;
+	}
 }
 
-static struct irqaction omap_mpu_timer_irq = {
+static struct clock_event_device clockevent_mpu_timer1 = {
-	.name		= "mpu timer",
+	.name		= "mpu_timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.features       = CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
-	.handler	= omap_mpu_timer_interrupt,
+	.shift		= 32,
+	.set_next_event	= omap_mpu_set_next_event,
+	.set_mode	= omap_mpu_set_mode,
 };
 
-static unsigned long omap_mpu_timer1_overflows;
 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 {
-	omap_mpu_timer1_overflows++;
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
+
+	evt->event_handler(evt);
+
 	return IRQ_HANDLED;
 }
 
 static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu timer1 overflow",
+	.name		= "mpu_timer1",
-	.flags		= IRQF_DISABLED,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
 	.handler	= omap_mpu_timer1_interrupt,
 };
 
-static __init void omap_init_mpu_timer(void)
+static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000);
+	set_cyc2ns_scale(rate / 1000);
-	omap_timer.offset = omap_mpu_timer_gettimeoffset;
+
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
-	setup_irq(INT_TIMER2, &omap_mpu_timer_irq);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
-	omap_mpu_timer_start(0, 0xffffffff);
+
-	omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD);
+	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
+					    clockevent_mpu_timer1.shift);
+	clockevent_mpu_timer1.max_delta_ns =
+		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
+	clockevent_mpu_timer1.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_mpu_timer1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_mpu_timer1);
 }
 
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer 2 ... free running 32-bit clock source and scheduler clock
+ * ---------------------------------------------------------------------------
+ */
+
+static unsigned long omap_mpu_timer2_overflows;
+
+static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id)
+{
+	omap_mpu_timer2_overflows++;
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap_mpu_timer2_irq = {
+	.name		= "mpu_timer2",
+	.flags		= IRQF_DISABLED,
+	.handler	= omap_mpu_timer2_interrupt,
+};
+
+static cycle_t mpu_read(void)
+{
+	return ~omap_mpu_timer_read(1);
+}
+
+static struct clocksource clocksource_mpu = {
+	.name		= "mpu_timer2",
+	.rating		= 300,
+	.read		= mpu_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 24,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init omap_init_clocksource(unsigned long rate)
+{
+	static char err[] __initdata = KERN_ERR
+			"%s: can't register clocksource!\n";
+
+	clocksource_mpu.mult
+		= clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
+
+	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
+	omap_mpu_timer_start(1, ~0, 1);
+
+	if (clocksource_register(&clocksource_mpu))
+		printk(err, clocksource_mpu.name);
+}
+
+
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
 unsigned long long sched_clock(void)
 {
-	unsigned long ticks = 0 - omap_mpu_timer_read(0);
+	unsigned long ticks = 0 - omap_mpu_timer_read(1);
 	unsigned long long ticks64;
 
-	ticks64 = omap_mpu_timer1_overflows;
+	ticks64 = omap_mpu_timer2_overflows;
 	ticks64 <<= 32;
 	ticks64 |= ticks;
 
@@ -225,10 +274,21 @@ unsigned long long sched_clock(void)
  */
 static void __init omap_timer_init(void)
 {
-	omap_init_mpu_timer();
+	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
+	unsigned long	rate;
+
+	BUG_ON(IS_ERR(ck_ref));
+
+	rate = clk_get_rate(ck_ref);
+	clk_put(ck_ref);
+
+	/* PTV = 0 */
+	rate /= 2;
+
+	omap_init_mpu_timer(rate);
+	omap_init_clocksource(rate);
 }
 
 struct sys_timer omap_timer = {
 	.init		= omap_timer_init,
-	.offset		= NULL,		/* Initialized later */
 };

arch/arm/mach-pxa/generic.c

@@ -164,9 +164,9 @@ void pxa_set_cken(int clock, int enable)
 	local_irq_save(flags);
 
 	if (enable)
-		CKEN |= clock;
+		CKEN |= (1 << clock);
 	else
-		CKEN &= ~clock;
+		CKEN &= ~(1 << clock);
 
 	local_irq_restore(flags);
 }

arch/arm/mach-pxa/irq.c

@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/ptrace.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -39,11 +38,33 @@ static void pxa_unmask_low_irq(unsigned int irq)
 	ICMR |= (1 << (irq + PXA_IRQ_SKIP));
 }
 
+static int pxa_set_wake(unsigned int irq, unsigned int on)
+{
+	u32	mask;
+
+	switch (irq) {
+	case IRQ_RTCAlrm:
+		mask = PWER_RTC;
+		break;
+#ifdef CONFIG_PXA27x
+	/* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */
+#endif
+	default:
+		return -EINVAL;
+	}
+	if (on)
+		PWER |= mask;
+	else
+		PWER &= ~mask;
+	return 0;
+}
+
 static struct irq_chip pxa_internal_chip_low = {
 	.name		= "SC",
 	.ack		= pxa_mask_low_irq,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
+	.set_wake	= pxa_set_wake,
 };
 
 #if PXA_INTERNAL_IRQS > 32
@@ -71,6 +92,26 @@ static struct irq_chip pxa_internal_chip_high = {
 
 #endif
 
+/* Note that if an input/irq line ever gets changed to an output during
+ * suspend, the relevant PWER, PRER, and PFER bits should be cleared.
+ */
+#ifdef CONFIG_PXA27x
+
+/* PXA27x:  Various gpios can issue wakeup events.  This logic only
+ * handles the simple cases, not the WEMUX2 and WEMUX3 options
+ */
+#define PXA27x_GPIO_NOWAKE_MASK \
+	((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
+#define	WAKEMASK(gpio) \
+	(((gpio) <= 15) \
+		? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
+		: ((gpio == 35) ? (1 << 24) : 0))
+#else
+
+/* pxa 210, 250, 255, 26x:  gpios 0..15 can issue wakeups */
+#define	WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0)
+#endif
+
 /*
  * PXA GPIO edge detection for IRQs:
  * IRQs are generated on Falling-Edge, Rising-Edge, or both.
@@ -84,9 +125,11 @@ static long GPIO_IRQ_mask[4];
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int gpio, idx;
+	u32 mask;
 
 	gpio = IRQ_TO_GPIO(irq);
 	idx = gpio >> 5;
+	mask = WAKEMASK(gpio);
 
 	if (type == IRQT_PROBE) {
 	    /* Don't mess with enabled GPIOs using preconfigured edges or
@@ -106,14 +149,20 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 	if (type & __IRQT_RISEDGE) {
 		/* printk("rising "); */
 		__set_bit (gpio, GPIO_IRQ_rising_edge);
-	} else
+		PRER |= mask;
+	} else {
 		__clear_bit (gpio, GPIO_IRQ_rising_edge);
+		PRER &= ~mask;
+	}
 
 	if (type & __IRQT_FALEDGE) {
 		/* printk("falling "); */
 		__set_bit (gpio, GPIO_IRQ_falling_edge);
-	} else
+		PFER |= mask;
+	} else {
 		__clear_bit (gpio, GPIO_IRQ_falling_edge);
+		PFER &= ~mask;
+	}
 
 	/* printk("edges\n"); */
 
@@ -131,12 +180,29 @@ static void pxa_ack_low_gpio(unsigned int irq)
 	GEDR0 = (1 << (irq - IRQ_GPIO0));
 }
 
+static int pxa_set_gpio_wake(unsigned int irq, unsigned int on)
+{
+	int	gpio = IRQ_TO_GPIO(irq);
+	u32	mask = WAKEMASK(gpio);
+
+	if (!mask)
+		return -EINVAL;
+
+	if (on)
+		PWER |= mask;
+	else
+		PWER &= ~mask;
+	return 0;
+}
+
+
 static struct irq_chip pxa_low_gpio_chip = {
 	.name		= "GPIO-l",
 	.ack		= pxa_ack_low_gpio,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
 	.set_type	= pxa_gpio_irq_type,
+	.set_wake	= pxa_set_gpio_wake,
 };
 
 /*
@@ -245,6 +311,7 @@ static struct irq_chip pxa_muxed_gpio_chip = {
 	.mask		= pxa_mask_muxed_gpio,
 	.unmask		= pxa_unmask_muxed_gpio,
 	.set_type	= pxa_gpio_irq_type,
+	.set_wake	= pxa_set_gpio_wake,
 };
 
 

arch/arm/mach-pxa/lpd270.c

@@ -234,7 +234,7 @@ static void lpd270_backlight_power(int on)
 {
 	if (on) {
 		pxa_gpio_mode(GPIO16_PWM0_MD);
-		pxa_set_cken(CKEN0_PWM0, 1);
+		pxa_set_cken(CKEN_PWM0, 1);
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x3ff;
 		PWM_PERVAL0 = 0x3ff;
@@ -242,7 +242,7 @@ static void lpd270_backlight_power(int on)
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x0;
 		PWM_PERVAL0 = 0x3FF;
-		pxa_set_cken(CKEN0_PWM0, 0);
+		pxa_set_cken(CKEN_PWM0, 0);
 	}
 }
 

arch/arm/mach-pxa/lubbock.c

@@ -220,7 +220,7 @@ static struct resource pxa_ssp_resources[] = {
 
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
 	.ssp_type	= PXA25x_SSP,
-	.clock_enable	= CKEN3_SSP,
+	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 0,
 };
 

arch/arm/mach-pxa/mainstone.c

@@ -266,7 +266,7 @@ static void mainstone_backlight_power(int on)
 {
 	if (on) {
 		pxa_gpio_mode(GPIO16_PWM0_MD);
-		pxa_set_cken(CKEN0_PWM0, 1);
+		pxa_set_cken(CKEN_PWM0, 1);
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x3ff;
 		PWM_PERVAL0 = 0x3ff;
@@ -274,7 +274,7 @@ static void mainstone_backlight_power(int on)
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x0;
 		PWM_PERVAL0 = 0x3FF;
-		pxa_set_cken(CKEN0_PWM0, 0);
+		pxa_set_cken(CKEN_PWM0, 0);
 	}
 }
 

arch/arm/mach-pxa/pxa27x.c

@@ -140,9 +140,9 @@ void pxa_cpu_pm_enter(suspend_state_t state)
 	extern void pxa_cpu_resume(void);
 
 	if (state == PM_SUSPEND_STANDBY)
-		CKEN = CKEN22_MEMC | CKEN9_OSTIMER | CKEN16_LCD |CKEN0_PWM0;
+		CKEN = CKEN_MEMC | CKEN_OSTIMER | CKEN_LCD | CKEN_PWM0;
 	else
-		CKEN = CKEN22_MEMC | CKEN9_OSTIMER;
+		CKEN = CKEN_MEMC | CKEN_OSTIMER;
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;

arch/arm/mach-pxa/ssp.c

@@ -52,13 +52,13 @@ struct ssp_info_ {
  */
 static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
 #if defined (CONFIG_PXA27x)
-	{IRQ_SSP,	CKEN23_SSP1},
+	{IRQ_SSP,	CKEN_SSP1},
-	{IRQ_SSP2,	CKEN3_SSP2},
+	{IRQ_SSP2,	CKEN_SSP2},
-	{IRQ_SSP3,	CKEN4_SSP3},
+	{IRQ_SSP3,	CKEN_SSP3},
 #else
-	{IRQ_SSP,	CKEN3_SSP},
+	{IRQ_SSP,	CKEN_SSP},
-	{IRQ_NSSP,	CKEN9_NSSP},
+	{IRQ_NSSP,	CKEN_NSSP},
-	{IRQ_ASSP,	CKEN10_ASSP},
+	{IRQ_ASSP,	CKEN_ASSP},
 #endif
 };
 

arch/arm/mach-rpc/riscpc.c

@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <linux/device.h>
 #include <linux/serial_8250.h>
+#include <linux/pata_platform.h>
 
 #include <asm/elf.h>
 #include <asm/io.h>
@@ -159,11 +160,45 @@ static struct platform_device serial_device = {
 	},
 };
 
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift		= 2,
+};
+
+static struct resource pata_resources[] = {
+	[0] = {
+		.start		= 0x030107c0,
+		.end		= 0x030107df,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0x03010fd8,
+		.end		= 0x03010fdb,
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start		= IRQ_HARDDISK,
+		.end		= IRQ_HARDDISK,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pata_device = {
+	.name			= "pata_platform",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(pata_resources),
+	.resource		= pata_resources,
+	.dev			= {
+		.platform_data	= &pata_platform_data,
+		.coherent_dma_mask = ~0,	/* grumble */
+	},
+};
+
 static struct platform_device *devs[] __initdata = {
 	&iomd_device,
 	&kbd_device,
 	&serial_device,
 	&acornfb_device,
+	&pata_device,
 };
 
 static int __init rpc_init(void)

arch/arm/mach-s3c2410/bast-irq.c

@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
-#include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-s3c2410/irq.c

@@ -23,7 +23,6 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
 #include <asm/plat-s3c24xx/cpu.h>

arch/arm/mach-s3c2410/mach-amlm5900.c

@@ -160,17 +160,11 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 #endif
 };
 
-static struct s3c24xx_board amlm5900_board __initdata = {
-	.devices       = amlm5900_devices,
-	.devices_count = ARRAY_SIZE(amlm5900_devices)
-};
-
 void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
-	s3c24xx_set_board(&amlm5900_board);
 }
 
 #ifdef CONFIG_FB_S3C2410
@@ -247,6 +241,7 @@ static void __init amlm5900_init(void)
 #ifdef CONFIG_FB_S3C2410
 	s3c24xx_fb_set_platdata(&amlm5900_lcd_info);
 #endif
+	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")

arch/arm/mach-s3c2410/mach-bast.c

@@ -464,13 +464,6 @@ static struct clk *bast_clocks[] = {
 	&s3c24xx_uclk,
 };
 
-static struct s3c24xx_board bast_board __initdata = {
-	.devices       = bast_devices,
-	.devices_count = ARRAY_SIZE(bast_devices),
-	.clocks	       = bast_clocks,
-	.clocks_count  = ARRAY_SIZE(bast_clocks),
-};
-
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -486,19 +479,22 @@ static void __init bast_map_io(void)
 
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
+	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
+
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
 	s3c_device_i2c.dev.platform_data = &bast_i2c_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-	s3c24xx_set_board(&bast_board);
+
 	usb_simtec_init();
 }
 
 static void __init bast_init(void)
 {
 	s3c24xx_fb_set_platdata(&bast_lcd_info);
+	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 }
 
 MACHINE_START(BAST, "Simtec-BAST")

arch/arm/mach-s3c2410/mach-h1940.c

@@ -129,7 +129,6 @@ static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 };
 
 
-
 /**
  * Set lcd on or off
  **/
@@ -188,17 +187,11 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_leds,
 };
 
-static struct s3c24xx_board h1940_board __initdata = {
-	.devices       = h1940_devices,
-	.devices_count = ARRAY_SIZE(h1940_devices)
-};
-
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
-	s3c24xx_set_board(&h1940_board);
 
 	/* setup PM */
 
@@ -232,6 +225,8 @@ static void __init h1940_init(void)
 	      | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
 	      | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
+
+	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")

arch/arm/mach-s3c2410/mach-n30.c

@@ -90,17 +90,11 @@ static struct s3c2410_platform_i2c n30_i2ccfg = {
 	.max_freq	= 10*1000,
 };
 
-static struct s3c24xx_board n30_board __initdata = {
-	.devices       = n30_devices,
-	.devices_count = ARRAY_SIZE(n30_devices)
-};
-
 static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
-	s3c24xx_set_board(&n30_board);
 }
 
 static void __init n30_init_irq(void)
@@ -120,6 +114,8 @@ static void __init n30_init(void)
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
 }
 
 MACHINE_START(N30, "Acer-N30")

arch/arm/mach-s3c2410/mach-otom.c

@@ -100,20 +100,17 @@ static struct platform_device *otom11_devices[] __initdata = {
 	&otom_device_nor,
 };
 
-static struct s3c24xx_board otom11_board __initdata = {
-	.devices       = otom11_devices,
-	.devices_count = ARRAY_SIZE(otom11_devices)
-};
-
-
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
-	s3c24xx_set_board(&otom11_board);
 }
 
+static void __init otom11_init(void)
+{
+	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
+}
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
@@ -121,6 +118,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= otom11_map_io,
+	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2410/mach-qt2410.c

@@ -29,7 +29,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/mmc/protocol.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
@@ -331,11 +330,6 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&qt2410_led,
 };
 
-static struct s3c24xx_board qt2410_board __initdata = {
-	.devices       = qt2410_devices,
-	.devices_count = ARRAY_SIZE(qt2410_devices)
-};
-
 static struct mtd_partition qt2410_nand_part[] = {
 	[0] = {
 		.name	= "U-Boot",
@@ -405,7 +399,6 @@ static void __init qt2410_map_io(void)
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
 	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_board(&qt2410_board);
 }
 
 static void __init qt2410_machine_init(void)
@@ -432,6 +425,7 @@ static void __init qt2410_machine_init(void)
 
 	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 
+	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c2410_pm_init();
 }
 

arch/arm/mach-s3c2410/mach-smdk2410.c

@@ -94,17 +94,17 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 	&s3c_device_iis,
 };
 
-static struct s3c24xx_board smdk2410_board __initdata = {
-	.devices       = smdk2410_devices,
-	.devices_count = ARRAY_SIZE(smdk2410_devices)
-};
-
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_board(&smdk2410_board);
+}
+
+static void __init smdk2410_init(void)
+{
+	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
+	smdk_machine_init();
 }
 
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
@@ -115,7 +115,7 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= smdk_machine_init,
+	.init_machine	= smdk2410_init,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
 

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -384,13 +384,6 @@ static struct clk *vr1000_clocks[] = {
 	&s3c24xx_uclk,
 };
 
-static struct s3c24xx_board vr1000_board __initdata = {
-	.devices       = vr1000_devices,
-	.devices_count = ARRAY_SIZE(vr1000_devices),
-	.clocks	       = vr1000_clocks,
-	.clocks_count  = ARRAY_SIZE(vr1000_clocks),
-};
-
 static void vr1000_power_off(void)
 {
 	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
@@ -412,15 +405,19 @@ static void __init vr1000_map_io(void)
 
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
+	s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
+
 	pm_power_off = vr1000_power_off;
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
-	s3c24xx_set_board(&vr1000_board);
-	usb_simtec_init();
 }
 
+static void __init vr1000_init(void)
+{
+	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+}
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
@@ -428,6 +425,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= vr1000_map_io,
+	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2412/Kconfig

@@ -47,6 +47,15 @@ config MACH_S3C2413
 	  machine_is_s3c2413() will work when MACH_SMDK2413 is
 	  selected
 
+config MACH_SMDK2412
+	bool "SMDK2412"
+	select MACH_SMDK2413
+	help
+	  Say Y here if you are using an SMDK2412
+
+	  Note, this shares support with SMDK2413, so will automatically
+	  select MACH_SMDK2413.
+
 config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412

arch/arm/mach-s3c2412/irq.c

@@ -23,7 +23,6 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
 #include <asm/hardware.h>

arch/arm/mach-s3c2412/mach-smdk2413.c

@@ -110,11 +110,6 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_usbgadget,
 };
 
-static struct s3c24xx_board smdk2413_board __initdata = {
-	.devices       = smdk2413_devices,
-	.devices_count = ARRAY_SIZE(smdk2413_devices)
-};
-
 static void __init smdk2413_fixup(struct machine_desc *desc,
 				  struct tag *tags, char **cmdline,
 				  struct meminfo *mi)
@@ -132,7 +127,6 @@ static void __init smdk2413_map_io(void)
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
-	s3c24xx_set_board(&smdk2413_board);
 }
 
 static void __init smdk2413_machine_init(void)
@@ -149,6 +143,7 @@ static void __init smdk2413_machine_init(void)
 
  	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
 
+	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
 	smdk_machine_init();
 }
 

arch/arm/mach-s3c2412/mach-vstms.c

@@ -129,11 +129,6 @@ static struct platform_device *vstms_devices[] __initdata = {
 	&s3c_device_nand,
 };
 
-static struct s3c24xx_board vstms_board __initdata = {
-	.devices       = vstms_devices,
-	.devices_count = ARRAY_SIZE(vstms_devices)
-};
-
 static void __init vstms_fixup(struct machine_desc *desc,
 				  struct tag *tags, char **cmdline,
 				  struct meminfo *mi)
@@ -153,7 +148,11 @@ static void __init vstms_map_io(void)
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
-	s3c24xx_set_board(&vstms_board);
+}
+
+static void __init vstms_init(void)
+{
+	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
 MACHINE_START(VSTMS, "VSTMS")
@@ -163,6 +162,7 @@ MACHINE_START(VSTMS, "VSTMS")
 
 	.fixup		= vstms_fixup,
 	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2440/irq.c

@@ -23,7 +23,6 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
 #include <asm/hardware.h>

arch/arm/mach-s3c2440/mach-anubis.c

@@ -281,13 +281,6 @@ static struct clk *anubis_clocks[] = {
 	&s3c24xx_uclk,
 };
 
-static struct s3c24xx_board anubis_board __initdata = {
-	.devices       = anubis_devices,
-	.devices_count = ARRAY_SIZE(anubis_devices),
-	.clocks	       = anubis_clocks,
-	.clocks_count  = ARRAY_SIZE(anubis_clocks),
-};
-
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -303,23 +296,31 @@ static void __init anubis_map_io(void)
 
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
+	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
+
 	s3c_device_nand.dev.platform_data = &anubis_nand_info;
 
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-	s3c24xx_set_board(&anubis_board);
 
 	/* ensure that the GPIO is setup */
 	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
 }
 
+static void __init anubis_init(void)
+{
+	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+}
+
+
 MACHINE_START(ANUBIS, "Simtec-Anubis")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= anubis_map_io,
+	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -116,12 +116,6 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 	&nexcoder_device_nor,
 };
 
-static struct s3c24xx_board nexcoder_board __initdata = {
-	.devices       = nexcoder_devices,
-	.devices_count = ARRAY_SIZE(nexcoder_devices),
-};
-
-
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
@@ -142,10 +136,14 @@ static void __init nexcoder_map_io(void)
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-	s3c24xx_set_board(&nexcoder_board);
+
 	nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init(void)
+{
+	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
@@ -153,6 +151,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= nexcoder_map_io,
+	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END