soc: bcm2835: sync firmware properties with downstream

Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed to use the reboot notify in the following
commit.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This commit is contained in:
Stefan Wahren 2018-12-07 19:21:10 +01:00
parent bfeffd1552
commit c6275e4b12

View File

@ -73,6 +73,8 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021,
RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030,
RPI_FIRMWARE_GET_THROTTLED = 0x00030046,
RPI_FIRMWARE_GET_CLOCK_MEASURED = 0x00030047,
RPI_FIRMWARE_NOTIFY_REBOOT = 0x00030048,
RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
@ -86,6 +88,8 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043,
RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045,
RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045,
RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049,
RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050,
/* Dispmanx TAGS */