usb: amd5536udc: fixed shared interrupt bug and warning oops

- fixed shared interrupt bug reported by Vadim Lobanov
 - fixed possible warning oops on driver unload when connected
 - prevent interrupt flood in PIO mode ("modprobe amd5536udc use_dma=0")
   when using gadget ether

Signed-off-by: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Cc: Robert Richter <robert.richter@amd.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Thomas Dahlmann 2009-11-17 14:18:27 -08:00 committed by Greg Kroah-Hartman
parent 0de6ab8b91
commit c5deb832d7

View File

@ -1213,7 +1213,12 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
tmp &= AMD_UNMASK_BIT(ep->num); tmp &= AMD_UNMASK_BIT(ep->num);
writel(tmp, &dev->regs->ep_irqmsk); writel(tmp, &dev->regs->ep_irqmsk);
} }
} } else if (ep->in) {
/* enable ep irq */
tmp = readl(&dev->regs->ep_irqmsk);
tmp &= AMD_UNMASK_BIT(ep->num);
writel(tmp, &dev->regs->ep_irqmsk);
}
} else if (ep->dma) { } else if (ep->dma) {
@ -2005,18 +2010,17 @@ __acquires(dev->lock)
{ {
int tmp; int tmp;
/* empty queues and init hardware */
udc_basic_init(dev);
for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
empty_req_queue(&dev->ep[tmp]);
}
if (dev->gadget.speed != USB_SPEED_UNKNOWN) { if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
spin_unlock(&dev->lock); spin_unlock(&dev->lock);
driver->disconnect(&dev->gadget); driver->disconnect(&dev->gadget);
spin_lock(&dev->lock); spin_lock(&dev->lock);
} }
/* init */
/* empty queues and init hardware */
udc_basic_init(dev);
for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
empty_req_queue(&dev->ep[tmp]);
udc_setup_endpoints(dev); udc_setup_endpoints(dev);
} }
@ -2472,6 +2476,13 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
} }
} }
} else if (!use_dma && ep->in) {
/* disable interrupt */
tmp = readl(
&dev->regs->ep_irqmsk);
tmp |= AMD_BIT(ep->num);
writel(tmp,
&dev->regs->ep_irqmsk);
} }
} }
/* clear status bits */ /* clear status bits */
@ -3279,6 +3290,17 @@ static int udc_pci_probe(
goto finished; goto finished;
} }
spin_lock_init(&dev->lock);
/* udc csr registers base */
dev->csr = dev->virt_addr + UDC_CSR_ADDR;
/* dev registers base */
dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
/* ep registers base */
dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
/* fifo's base */
dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq); dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
kfree(dev); kfree(dev);
@ -3331,7 +3353,6 @@ static int udc_probe(struct udc *dev)
udc_pollstall_timer.data = 0; udc_pollstall_timer.data = 0;
/* device struct setup */ /* device struct setup */
spin_lock_init(&dev->lock);
dev->gadget.ops = &udc_ops; dev->gadget.ops = &udc_ops;
dev_set_name(&dev->gadget.dev, "gadget"); dev_set_name(&dev->gadget.dev, "gadget");
@ -3340,16 +3361,6 @@ static int udc_probe(struct udc *dev)
dev->gadget.name = name; dev->gadget.name = name;
dev->gadget.is_dualspeed = 1; dev->gadget.is_dualspeed = 1;
/* udc csr registers base */
dev->csr = dev->virt_addr + UDC_CSR_ADDR;
/* dev registers base */
dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
/* ep registers base */
dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
/* fifo's base */
dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
/* init registers, interrupts, ... */ /* init registers, interrupts, ... */
startup_registers(dev); startup_registers(dev);