forked from Minki/linux
spi/topcliff_pch: DMA support
This patch enables this SPI driver works with DMA mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
parent
f016aeb655
commit
c37f3c2749
@ -28,6 +28,9 @@
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <linux/dmaengine.h>
|
||||
#include <linux/pch_dma.h>
|
||||
|
||||
/* Register offsets */
|
||||
#define PCH_SPCR 0x00 /* SPI control register */
|
||||
#define PCH_SPBRR 0x04 /* SPI baud rate register */
|
||||
@ -36,7 +39,7 @@
|
||||
#define PCH_SPDRR 0x10 /* SPI read data register */
|
||||
#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */
|
||||
#define PCH_SRST 0x1C /* SPI reset register */
|
||||
#define PCH_SPI_ADDRESS_SIZE 0x20
|
||||
#define PCH_ADDRESS_SIZE 0x20
|
||||
|
||||
#define PCH_SPSR_TFD 0x000007C0
|
||||
#define PCH_SPSR_RFD 0x0000F800
|
||||
@ -54,8 +57,6 @@
|
||||
#define STATUS_EXITING 2
|
||||
#define PCH_SLEEP_TIME 10
|
||||
|
||||
#define PCH_ADDRESS_SIZE 0x20
|
||||
|
||||
#define SSN_LOW 0x02U
|
||||
#define SSN_NO_CONTROL 0x00U
|
||||
#define PCH_MAX_CS 0xFF
|
||||
@ -75,6 +76,7 @@
|
||||
#define SPSR_TFI_BIT (1 << 0)
|
||||
#define SPSR_RFI_BIT (1 << 1)
|
||||
#define SPSR_FI_BIT (1 << 2)
|
||||
#define SPSR_ORF_BIT (1 << 3)
|
||||
#define SPBRR_SIZE_BIT (1 << 10)
|
||||
|
||||
#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|\
|
||||
@ -83,10 +85,9 @@
|
||||
#define SPCR_RFIC_FIELD 20
|
||||
#define SPCR_TFIC_FIELD 16
|
||||
|
||||
#define SPSR_INT_BITS 0x1F
|
||||
#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1))
|
||||
#define MASK_RFIC_SPCR_BITS (~(0xf << 20))
|
||||
#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12))
|
||||
#define MASK_SPBRR_SPBR_BITS ((1 << 10) - 1)
|
||||
#define MASK_RFIC_SPCR_BITS (0xf << SPCR_RFIC_FIELD)
|
||||
#define MASK_TFIC_SPCR_BITS (0xf << SPCR_TFIC_FIELD)
|
||||
|
||||
#define PCH_CLOCK_HZ 50000000
|
||||
#define PCH_MAX_SPBR 1023
|
||||
@ -102,6 +103,28 @@
|
||||
*/
|
||||
#define PCH_SPI_MAX_DEV 2
|
||||
|
||||
#define PCH_BUF_SIZE 4096
|
||||
#define PCH_DMA_TRANS_SIZE 12
|
||||
|
||||
static int use_dma = 1;
|
||||
|
||||
struct pch_spi_dma_ctrl {
|
||||
struct dma_async_tx_descriptor *desc_tx;
|
||||
struct dma_async_tx_descriptor *desc_rx;
|
||||
struct pch_dma_slave param_tx;
|
||||
struct pch_dma_slave param_rx;
|
||||
struct dma_chan *chan_tx;
|
||||
struct dma_chan *chan_rx;
|
||||
struct scatterlist *sg_tx_p;
|
||||
struct scatterlist *sg_rx_p;
|
||||
struct scatterlist sg_tx;
|
||||
struct scatterlist sg_rx;
|
||||
int nent;
|
||||
void *tx_buf_virt;
|
||||
void *rx_buf_virt;
|
||||
dma_addr_t tx_buf_dma;
|
||||
dma_addr_t rx_buf_dma;
|
||||
};
|
||||
/**
|
||||
* struct pch_spi_data - Holds the SPI channel specific details
|
||||
* @io_remap_addr: The remapped PCI base address
|
||||
@ -140,6 +163,7 @@
|
||||
*/
|
||||
struct pch_spi_data {
|
||||
void __iomem *io_remap_addr;
|
||||
unsigned long io_base_addr;
|
||||
struct spi_master *master;
|
||||
struct work_struct work;
|
||||
struct workqueue_struct *wk;
|
||||
@ -162,6 +186,8 @@ struct pch_spi_data {
|
||||
struct pch_spi_board_data *board_dat;
|
||||
struct platform_device *plat_dev;
|
||||
int ch;
|
||||
struct pch_spi_dma_ctrl dma;
|
||||
int use_dma;
|
||||
u8 irq_reg_sts;
|
||||
};
|
||||
|
||||
@ -273,10 +299,10 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
|
||||
reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */
|
||||
|
||||
/* reset rx threshold */
|
||||
reg_spcr_val &= MASK_RFIC_SPCR_BITS;
|
||||
reg_spcr_val &= ~MASK_RFIC_SPCR_BITS;
|
||||
reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD);
|
||||
iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))),
|
||||
(io_remap_addr + PCH_SPCR));
|
||||
|
||||
iowrite32(reg_spcr_val, (io_remap_addr + PCH_SPCR));
|
||||
}
|
||||
|
||||
/* update counts */
|
||||
@ -287,12 +313,15 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
|
||||
|
||||
/* if transfer complete interrupt */
|
||||
if (reg_spsr_val & SPSR_FI_BIT) {
|
||||
/* disable FI & RFI interrupts */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
|
||||
SPCR_FIE_BIT | SPCR_RFIE_BIT);
|
||||
if (tx_index < bpw_len)
|
||||
dev_err(&data->master->dev,
|
||||
"%s : Transfer is not completed", __func__);
|
||||
/* disable interrupts */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
|
||||
|
||||
/* transfer is completed;inform pch_spi_process_messages */
|
||||
data->transfer_complete = true;
|
||||
data->transfer_active = false;
|
||||
wake_up(&data->wait);
|
||||
}
|
||||
}
|
||||
@ -316,12 +345,17 @@ static irqreturn_t pch_spi_handler(int irq, void *dev_id)
|
||||
"%s returning due to suspend\n", __func__);
|
||||
return IRQ_NONE;
|
||||
}
|
||||
if (data->use_dma)
|
||||
return IRQ_NONE;
|
||||
|
||||
io_remap_addr = data->io_remap_addr;
|
||||
spsr = io_remap_addr + PCH_SPSR;
|
||||
|
||||
reg_spsr_val = ioread32(spsr);
|
||||
|
||||
if (reg_spsr_val & SPSR_ORF_BIT)
|
||||
dev_err(&board_dat->pdev->dev, "%s Over run error", __func__);
|
||||
|
||||
/* Check if the interrupt is for SPI device */
|
||||
if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
|
||||
pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr);
|
||||
@ -347,7 +381,7 @@ static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz)
|
||||
if (n_spbr > PCH_MAX_SPBR)
|
||||
n_spbr = PCH_MAX_SPBR;
|
||||
|
||||
pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS);
|
||||
pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, MASK_SPBRR_SPBR_BITS);
|
||||
}
|
||||
|
||||
/**
|
||||
@ -456,26 +490,27 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
|
||||
dev_dbg(&pspi->dev, "%s Transfer List not empty. "
|
||||
"Transfer Speed is set.\n", __func__);
|
||||
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
/* validate Tx/Rx buffers and Transfer length */
|
||||
list_for_each_entry(transfer, &pmsg->transfers, transfer_list) {
|
||||
if (!transfer->tx_buf && !transfer->rx_buf) {
|
||||
dev_err(&pspi->dev,
|
||||
"%s Tx and Rx buffer NULL\n", __func__);
|
||||
retval = -EINVAL;
|
||||
goto err_out;
|
||||
goto err_return_spinlock;
|
||||
}
|
||||
|
||||
if (!transfer->len) {
|
||||
dev_err(&pspi->dev, "%s Transfer length invalid\n",
|
||||
__func__);
|
||||
retval = -EINVAL;
|
||||
goto err_out;
|
||||
goto err_return_spinlock;
|
||||
}
|
||||
|
||||
dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length"
|
||||
" valid\n", __func__);
|
||||
|
||||
/* if baud rate hs been specified validate the same */
|
||||
/* if baud rate has been specified validate the same */
|
||||
if (transfer->speed_hz > PCH_MAX_BAUDRATE)
|
||||
transfer->speed_hz = PCH_MAX_BAUDRATE;
|
||||
|
||||
@ -486,25 +521,24 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
|
||||
retval = -EINVAL;
|
||||
dev_err(&pspi->dev,
|
||||
"%s Invalid bits per word\n", __func__);
|
||||
goto err_out;
|
||||
goto err_return_spinlock;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
|
||||
/* We won't process any messages if we have been asked to terminate */
|
||||
if (data->status == STATUS_EXITING) {
|
||||
dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__);
|
||||
retval = -ESHUTDOWN;
|
||||
goto err_return_spinlock;
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
/* If suspended ,return -EINVAL */
|
||||
if (data->board_dat->suspend_sts) {
|
||||
dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__);
|
||||
retval = -EINVAL;
|
||||
goto err_return_spinlock;
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
/* set status of message */
|
||||
@ -512,9 +546,11 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
|
||||
dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status);
|
||||
|
||||
pmsg->status = -EINPROGRESS;
|
||||
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
/* add message to queue */
|
||||
list_add_tail(&pmsg->queue, &data->queue);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
|
||||
dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__);
|
||||
|
||||
/* schedule work queue to run */
|
||||
@ -523,11 +559,13 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
|
||||
|
||||
retval = 0;
|
||||
|
||||
err_return_spinlock:
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
err_out:
|
||||
dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval);
|
||||
return retval;
|
||||
err_return_spinlock:
|
||||
dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
return retval;
|
||||
}
|
||||
|
||||
static inline void pch_spi_select_chip(struct pch_spi_data *data,
|
||||
@ -548,8 +586,7 @@ static inline void pch_spi_select_chip(struct pch_spi_data *data,
|
||||
pch_spi_setup_transfer(pspi);
|
||||
}
|
||||
|
||||
static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw,
|
||||
struct spi_message **ppmsg)
|
||||
static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
|
||||
{
|
||||
int size;
|
||||
u32 n_writes;
|
||||
@ -558,8 +595,6 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw,
|
||||
const u8 *tx_buf;
|
||||
const u16 *tx_sbuf;
|
||||
|
||||
pmsg = *ppmsg;
|
||||
|
||||
/* set baud rate if needed */
|
||||
if (data->cur_trans->speed_hz) {
|
||||
dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__);
|
||||
@ -642,10 +677,9 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw,
|
||||
data->transfer_active = true;
|
||||
}
|
||||
|
||||
|
||||
static void pch_spi_nomore_transfer(struct pch_spi_data *data,
|
||||
struct spi_message *pmsg)
|
||||
static void pch_spi_nomore_transfer(struct pch_spi_data *data)
|
||||
{
|
||||
struct spi_message *pmsg;
|
||||
dev_dbg(&data->master->dev, "%s called\n", __func__);
|
||||
/* Invoke complete callback
|
||||
* [To the spi core..indicating end of transfer] */
|
||||
@ -696,29 +730,21 @@ static void pch_spi_nomore_transfer(struct pch_spi_data *data,
|
||||
|
||||
static void pch_spi_set_ir(struct pch_spi_data *data)
|
||||
{
|
||||
/* enable interrupts */
|
||||
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) {
|
||||
/* enable interrupts, set threshold, enable SPI */
|
||||
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH)
|
||||
/* set receive threshold to PCH_RX_THOLD */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
||||
PCH_RX_THOLD << SPCR_RFIC_FIELD,
|
||||
~MASK_RFIC_SPCR_BITS);
|
||||
/* enable FI and RFI interrupts */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
||||
SPCR_RFIE_BIT | SPCR_FIE_BIT, 0);
|
||||
} else {
|
||||
PCH_RX_THOLD << SPCR_RFIC_FIELD |
|
||||
SPCR_FIE_BIT | SPCR_RFIE_BIT |
|
||||
SPCR_ORIE_BIT | SPCR_SPE_BIT,
|
||||
MASK_RFIC_SPCR_BITS | PCH_ALL);
|
||||
else
|
||||
/* set receive threshold to maximum */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
||||
PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD,
|
||||
~MASK_TFIC_SPCR_BITS);
|
||||
/* enable FI interrupt */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0);
|
||||
}
|
||||
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s:invoking pch_spi_set_enable to enable SPI\n", __func__);
|
||||
|
||||
/* SPI set enable */
|
||||
pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0);
|
||||
PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD |
|
||||
SPCR_FIE_BIT | SPCR_ORIE_BIT |
|
||||
SPCR_SPE_BIT,
|
||||
MASK_RFIC_SPCR_BITS | PCH_ALL);
|
||||
|
||||
/* Wait until the transfer completes; go to sleep after
|
||||
initiating the transfer. */
|
||||
@ -731,15 +757,13 @@ static void pch_spi_set_ir(struct pch_spi_data *data)
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
|
||||
|
||||
data->transfer_active = false;
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s set data->transfer_active = false\n", __func__);
|
||||
|
||||
/* clear all interrupts */
|
||||
pch_spi_writereg(data->master, PCH_SPSR,
|
||||
pch_spi_readreg(data->master, PCH_SPSR));
|
||||
/* disable interrupts */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
|
||||
/* Disable interrupts and SPI transfer */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL | SPCR_SPE_BIT);
|
||||
/* clear FIFO */
|
||||
pch_spi_clear_fifo(data->master);
|
||||
}
|
||||
|
||||
static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw)
|
||||
@ -763,6 +787,327 @@ static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw)
|
||||
}
|
||||
}
|
||||
|
||||
static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw)
|
||||
{
|
||||
int j;
|
||||
u8 *rx_buf;
|
||||
u16 *rx_sbuf;
|
||||
const u8 *rx_dma_buf;
|
||||
const u16 *rx_dma_sbuf;
|
||||
|
||||
/* copy Rx Data */
|
||||
if (!data->cur_trans->rx_buf)
|
||||
return;
|
||||
|
||||
if (bpw == 8) {
|
||||
rx_buf = data->cur_trans->rx_buf;
|
||||
rx_dma_buf = data->dma.rx_buf_virt;
|
||||
for (j = 0; j < data->bpw_len; j++)
|
||||
*rx_buf++ = *rx_dma_buf++ & 0xFF;
|
||||
} else {
|
||||
rx_sbuf = data->cur_trans->rx_buf;
|
||||
rx_dma_sbuf = data->dma.rx_buf_virt;
|
||||
for (j = 0; j < data->bpw_len; j++)
|
||||
*rx_sbuf++ = *rx_dma_sbuf++;
|
||||
}
|
||||
}
|
||||
|
||||
static void pch_spi_start_transfer(struct pch_spi_data *data)
|
||||
{
|
||||
struct pch_spi_dma_ctrl *dma;
|
||||
unsigned long flags;
|
||||
|
||||
dma = &data->dma;
|
||||
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
|
||||
/* disable interrupts, SPI set enable */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_SPE_BIT, PCH_ALL);
|
||||
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
|
||||
/* Wait until the transfer completes; go to sleep after
|
||||
initiating the transfer. */
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s:waiting for transfer to get over\n", __func__);
|
||||
wait_event_interruptible(data->wait, data->transfer_complete);
|
||||
|
||||
dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
|
||||
DMA_FROM_DEVICE);
|
||||
async_tx_ack(dma->desc_rx);
|
||||
async_tx_ack(dma->desc_tx);
|
||||
kfree(dma->sg_tx_p);
|
||||
kfree(dma->sg_rx_p);
|
||||
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
|
||||
|
||||
/* clear fifo threshold, disable interrupts, disable SPI transfer */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
|
||||
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS | PCH_ALL |
|
||||
SPCR_SPE_BIT);
|
||||
/* clear all interrupts */
|
||||
pch_spi_writereg(data->master, PCH_SPSR,
|
||||
pch_spi_readreg(data->master, PCH_SPSR));
|
||||
/* clear FIFO */
|
||||
pch_spi_clear_fifo(data->master);
|
||||
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
}
|
||||
|
||||
static void pch_dma_rx_complete(void *arg)
|
||||
{
|
||||
struct pch_spi_data *data = arg;
|
||||
|
||||
/* transfer is completed;inform pch_spi_process_messages_dma */
|
||||
data->transfer_complete = true;
|
||||
wake_up_interruptible(&data->wait);
|
||||
}
|
||||
|
||||
static bool pch_spi_filter(struct dma_chan *chan, void *slave)
|
||||
{
|
||||
struct pch_dma_slave *param = slave;
|
||||
|
||||
if ((chan->chan_id == param->chan_id) &&
|
||||
(param->dma_dev == chan->device->dev)) {
|
||||
chan->private = param;
|
||||
return true;
|
||||
} else {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
static void pch_spi_request_dma(struct pch_spi_data *data, int bpw)
|
||||
{
|
||||
dma_cap_mask_t mask;
|
||||
struct dma_chan *chan;
|
||||
struct pci_dev *dma_dev;
|
||||
struct pch_dma_slave *param;
|
||||
struct pch_spi_dma_ctrl *dma;
|
||||
unsigned int width;
|
||||
|
||||
if (bpw == 8)
|
||||
width = PCH_DMA_WIDTH_1_BYTE;
|
||||
else
|
||||
width = PCH_DMA_WIDTH_2_BYTES;
|
||||
|
||||
dma = &data->dma;
|
||||
dma_cap_zero(mask);
|
||||
dma_cap_set(DMA_SLAVE, mask);
|
||||
|
||||
/* Get DMA's dev information */
|
||||
dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(12, 0));
|
||||
|
||||
/* Set Tx DMA */
|
||||
param = &dma->param_tx;
|
||||
param->dma_dev = &dma_dev->dev;
|
||||
param->chan_id = data->master->bus_num * 2; /* Tx = 0, 2 */
|
||||
param->tx_reg = data->io_base_addr + PCH_SPDWR;
|
||||
param->width = width;
|
||||
chan = dma_request_channel(mask, pch_spi_filter, param);
|
||||
if (!chan) {
|
||||
dev_err(&data->master->dev,
|
||||
"ERROR: dma_request_channel FAILS(Tx)\n");
|
||||
data->use_dma = 0;
|
||||
return;
|
||||
}
|
||||
dma->chan_tx = chan;
|
||||
|
||||
/* Set Rx DMA */
|
||||
param = &dma->param_rx;
|
||||
param->dma_dev = &dma_dev->dev;
|
||||
param->chan_id = data->master->bus_num * 2 + 1; /* Rx = Tx + 1 */
|
||||
param->rx_reg = data->io_base_addr + PCH_SPDRR;
|
||||
param->width = width;
|
||||
chan = dma_request_channel(mask, pch_spi_filter, param);
|
||||
if (!chan) {
|
||||
dev_err(&data->master->dev,
|
||||
"ERROR: dma_request_channel FAILS(Rx)\n");
|
||||
dma_release_channel(dma->chan_tx);
|
||||
dma->chan_tx = NULL;
|
||||
data->use_dma = 0;
|
||||
return;
|
||||
}
|
||||
dma->chan_rx = chan;
|
||||
}
|
||||
|
||||
static void pch_spi_release_dma(struct pch_spi_data *data)
|
||||
{
|
||||
struct pch_spi_dma_ctrl *dma;
|
||||
|
||||
dma = &data->dma;
|
||||
if (dma->chan_tx) {
|
||||
dma_release_channel(dma->chan_tx);
|
||||
dma->chan_tx = NULL;
|
||||
}
|
||||
if (dma->chan_rx) {
|
||||
dma_release_channel(dma->chan_rx);
|
||||
dma->chan_rx = NULL;
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
|
||||
{
|
||||
const u8 *tx_buf;
|
||||
const u16 *tx_sbuf;
|
||||
u8 *tx_dma_buf;
|
||||
u16 *tx_dma_sbuf;
|
||||
struct scatterlist *sg;
|
||||
struct dma_async_tx_descriptor *desc_tx;
|
||||
struct dma_async_tx_descriptor *desc_rx;
|
||||
int num;
|
||||
int i;
|
||||
int size;
|
||||
int rem;
|
||||
unsigned long flags;
|
||||
struct pch_spi_dma_ctrl *dma;
|
||||
|
||||
dma = &data->dma;
|
||||
|
||||
/* set baud rate if needed */
|
||||
if (data->cur_trans->speed_hz) {
|
||||
dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__);
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
}
|
||||
|
||||
/* set bits per word if needed */
|
||||
if (data->cur_trans->bits_per_word &&
|
||||
(data->current_msg->spi->bits_per_word !=
|
||||
data->cur_trans->bits_per_word)) {
|
||||
dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__);
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
pch_spi_set_bits_per_word(data->master,
|
||||
data->cur_trans->bits_per_word);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
*bpw = data->cur_trans->bits_per_word;
|
||||
} else {
|
||||
*bpw = data->current_msg->spi->bits_per_word;
|
||||
}
|
||||
data->bpw_len = data->cur_trans->len / (*bpw / 8);
|
||||
|
||||
/* copy Tx Data */
|
||||
if (data->cur_trans->tx_buf != NULL) {
|
||||
if (*bpw == 8) {
|
||||
tx_buf = data->cur_trans->tx_buf;
|
||||
tx_dma_buf = dma->tx_buf_virt;
|
||||
for (i = 0; i < data->bpw_len; i++)
|
||||
*tx_dma_buf++ = *tx_buf++;
|
||||
} else {
|
||||
tx_sbuf = data->cur_trans->tx_buf;
|
||||
tx_dma_sbuf = dma->tx_buf_virt;
|
||||
for (i = 0; i < data->bpw_len; i++)
|
||||
*tx_dma_sbuf++ = *tx_sbuf++;
|
||||
}
|
||||
}
|
||||
if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
|
||||
num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
|
||||
size = PCH_DMA_TRANS_SIZE;
|
||||
rem = data->bpw_len % PCH_DMA_TRANS_SIZE;
|
||||
} else {
|
||||
num = 1;
|
||||
size = data->bpw_len;
|
||||
rem = data->bpw_len;
|
||||
}
|
||||
dev_dbg(&data->master->dev, "%s num=%d size=%d rem=%d\n",
|
||||
__func__, num, size, rem);
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
|
||||
/* set receive fifo threshold and transmit fifo threshold */
|
||||
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
||||
((size - 1) << SPCR_RFIC_FIELD) |
|
||||
((PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE) <<
|
||||
SPCR_TFIC_FIELD),
|
||||
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS);
|
||||
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
|
||||
/* RX */
|
||||
dma->sg_rx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
|
||||
sg_init_table(dma->sg_rx_p, num); /* Initialize SG table */
|
||||
/* offset, length setting */
|
||||
sg = dma->sg_rx_p;
|
||||
for (i = 0; i < num; i++, sg++) {
|
||||
if (i == 0) {
|
||||
sg->offset = 0;
|
||||
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem,
|
||||
sg->offset);
|
||||
sg_dma_len(sg) = rem;
|
||||
} else {
|
||||
sg->offset = rem + size * (i - 1);
|
||||
sg->offset = sg->offset * (*bpw / 8);
|
||||
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
|
||||
sg->offset);
|
||||
sg_dma_len(sg) = size;
|
||||
}
|
||||
sg_dma_address(sg) = dma->rx_buf_dma + sg->offset;
|
||||
}
|
||||
sg = dma->sg_rx_p;
|
||||
desc_rx = dma->chan_rx->device->device_prep_slave_sg(dma->chan_rx, sg,
|
||||
num, DMA_FROM_DEVICE,
|
||||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||||
if (!desc_rx) {
|
||||
dev_err(&data->master->dev, "%s:device_prep_slave_sg Failed\n",
|
||||
__func__);
|
||||
return;
|
||||
}
|
||||
dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_FROM_DEVICE);
|
||||
desc_rx->callback = pch_dma_rx_complete;
|
||||
desc_rx->callback_param = data;
|
||||
dma->nent = num;
|
||||
dma->desc_rx = desc_rx;
|
||||
|
||||
/* TX */
|
||||
dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
|
||||
sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
|
||||
/* offset, length setting */
|
||||
sg = dma->sg_tx_p;
|
||||
for (i = 0; i < num; i++, sg++) {
|
||||
if (i == 0) {
|
||||
sg->offset = 0;
|
||||
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), rem,
|
||||
sg->offset);
|
||||
sg_dma_len(sg) = rem;
|
||||
} else {
|
||||
sg->offset = rem + size * (i - 1);
|
||||
sg->offset = sg->offset * (*bpw / 8);
|
||||
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size,
|
||||
sg->offset);
|
||||
sg_dma_len(sg) = size;
|
||||
}
|
||||
sg_dma_address(sg) = dma->tx_buf_dma + sg->offset;
|
||||
}
|
||||
sg = dma->sg_tx_p;
|
||||
desc_tx = dma->chan_tx->device->device_prep_slave_sg(dma->chan_tx,
|
||||
sg, num, DMA_TO_DEVICE,
|
||||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||||
if (!desc_tx) {
|
||||
dev_err(&data->master->dev, "%s:device_prep_slave_sg Failed\n",
|
||||
__func__);
|
||||
return;
|
||||
}
|
||||
dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_TO_DEVICE);
|
||||
desc_tx->callback = NULL;
|
||||
desc_tx->callback_param = data;
|
||||
dma->nent = num;
|
||||
dma->desc_tx = desc_tx;
|
||||
|
||||
dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing "
|
||||
"0x2 to SSNXCR\n", __func__);
|
||||
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
|
||||
desc_rx->tx_submit(desc_rx);
|
||||
desc_tx->tx_submit(desc_tx);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
|
||||
/* reset transfer complete flag */
|
||||
data->transfer_complete = false;
|
||||
}
|
||||
|
||||
static void pch_spi_process_messages(struct work_struct *pwork)
|
||||
{
|
||||
@ -774,13 +1119,10 @@ static void pch_spi_process_messages(struct work_struct *pwork)
|
||||
dev_dbg(&data->master->dev, "%s data initialized\n", __func__);
|
||||
|
||||
spin_lock(&data->lock);
|
||||
|
||||
/* check if suspend has been initiated;if yes flush queue */
|
||||
if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) {
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s suspend/remove initiated,flushing queue\n",
|
||||
__func__);
|
||||
|
||||
dev_dbg(&data->master->dev, "%s suspend/remove initiated,"
|
||||
"flushing queue\n", __func__);
|
||||
list_for_each_entry(pmsg, data->queue.next, queue) {
|
||||
pmsg->status = -EIO;
|
||||
|
||||
@ -814,53 +1156,42 @@ static void pch_spi_process_messages(struct work_struct *pwork)
|
||||
|
||||
spin_unlock(&data->lock);
|
||||
|
||||
if (data->use_dma)
|
||||
pch_spi_request_dma(data,
|
||||
data->current_msg->spi->bits_per_word);
|
||||
do {
|
||||
/* If we are already processing a message get the next
|
||||
transfer structure from the message otherwise retrieve
|
||||
the 1st transfer request from the message. */
|
||||
spin_lock(&data->lock);
|
||||
|
||||
if (data->cur_trans == NULL) {
|
||||
data->cur_trans =
|
||||
list_entry(data->current_msg->transfers.
|
||||
next, struct spi_transfer,
|
||||
transfer_list);
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s :Getting 1st transfer message\n", __func__);
|
||||
list_entry(data->current_msg->transfers.next,
|
||||
struct spi_transfer, transfer_list);
|
||||
dev_dbg(&data->master->dev, "%s "
|
||||
":Getting 1st transfer message\n", __func__);
|
||||
} else {
|
||||
data->cur_trans =
|
||||
list_entry(data->cur_trans->transfer_list.next,
|
||||
struct spi_transfer,
|
||||
transfer_list);
|
||||
dev_dbg(&data->master->dev,
|
||||
"%s :Getting next transfer message\n",
|
||||
__func__);
|
||||
struct spi_transfer, transfer_list);
|
||||
dev_dbg(&data->master->dev, "%s "
|
||||
":Getting next transfer message\n", __func__);
|
||||
}
|
||||
|
||||
spin_unlock(&data->lock);
|
||||
|
||||
pch_spi_set_tx(data, &bpw, &pmsg);
|
||||
|
||||
/* Control interrupt*/
|
||||
if (data->use_dma) {
|
||||
pch_spi_handle_dma(data, &bpw);
|
||||
pch_spi_start_transfer(data);
|
||||
pch_spi_copy_rx_data_for_dma(data, bpw);
|
||||
} else {
|
||||
pch_spi_set_tx(data, &bpw);
|
||||
pch_spi_set_ir(data);
|
||||
|
||||
/* Disable SPI transfer */
|
||||
pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0,
|
||||
SPCR_SPE_BIT);
|
||||
|
||||
/* clear FIFO */
|
||||
pch_spi_clear_fifo(data->master);
|
||||
|
||||
/* copy Rx Data */
|
||||
pch_spi_copy_rx_data(data, bpw);
|
||||
|
||||
/* free memory */
|
||||
kfree(data->pkt_rx_buff);
|
||||
data->pkt_rx_buff = NULL;
|
||||
|
||||
kfree(data->pkt_tx_buff);
|
||||
data->pkt_tx_buff = NULL;
|
||||
|
||||
}
|
||||
/* increment message count */
|
||||
data->current_msg->actual_length += data->cur_trans->len;
|
||||
|
||||
@ -881,12 +1212,15 @@ static void pch_spi_process_messages(struct work_struct *pwork)
|
||||
/* No more transfer in this message. */
|
||||
if ((data->cur_trans->transfer_list.next) ==
|
||||
&(data->current_msg->transfers)) {
|
||||
pch_spi_nomore_transfer(data, pmsg);
|
||||
pch_spi_nomore_transfer(data);
|
||||
}
|
||||
|
||||
spin_unlock(&data->lock);
|
||||
|
||||
} while (data->cur_trans != NULL);
|
||||
|
||||
if (data->use_dma)
|
||||
pch_spi_release_dma(data);
|
||||
}
|
||||
|
||||
static void pch_spi_free_resources(struct pch_spi_board_data *board_dat,
|
||||
@ -939,6 +1273,35 @@ err_return:
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void pch_free_dma_buf(struct pch_spi_board_data *board_dat,
|
||||
struct pch_spi_data *data)
|
||||
{
|
||||
struct pch_spi_dma_ctrl *dma;
|
||||
|
||||
dma = &data->dma;
|
||||
if (dma->tx_buf_dma)
|
||||
dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
|
||||
dma->tx_buf_virt, dma->tx_buf_dma);
|
||||
if (dma->rx_buf_dma)
|
||||
dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
|
||||
dma->rx_buf_virt, dma->rx_buf_dma);
|
||||
return;
|
||||
}
|
||||
|
||||
static void pch_alloc_dma_buf(struct pch_spi_board_data *board_dat,
|
||||
struct pch_spi_data *data)
|
||||
{
|
||||
struct pch_spi_dma_ctrl *dma;
|
||||
|
||||
dma = &data->dma;
|
||||
/* Get Consistent memory for Tx DMA */
|
||||
dma->tx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev,
|
||||
PCH_BUF_SIZE, &dma->tx_buf_dma, GFP_KERNEL);
|
||||
/* Get Consistent memory for Rx DMA */
|
||||
dma->rx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev,
|
||||
PCH_BUF_SIZE, &dma->rx_buf_dma, GFP_KERNEL);
|
||||
}
|
||||
|
||||
static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev)
|
||||
{
|
||||
int ret;
|
||||
@ -946,6 +1309,8 @@ static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev)
|
||||
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
|
||||
struct pch_spi_data *data;
|
||||
|
||||
dev_dbg(&plat_dev->dev, "%s:debug\n", __func__);
|
||||
|
||||
master = spi_alloc_master(&board_dat->pdev->dev,
|
||||
sizeof(struct pch_spi_data));
|
||||
if (!master) {
|
||||
@ -959,9 +1324,11 @@ static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev)
|
||||
|
||||
platform_set_drvdata(plat_dev, data);
|
||||
|
||||
/* baseaddress + 0x20(offset) */
|
||||
/* baseaddress + address offset) */
|
||||
data->io_base_addr = pci_resource_start(board_dat->pdev, 1) +
|
||||
PCH_ADDRESS_SIZE * plat_dev->id;
|
||||
data->io_remap_addr = pci_iomap(board_dat->pdev, 1, 0) +
|
||||
0x20 * plat_dev->id;
|
||||
PCH_ADDRESS_SIZE * plat_dev->id;
|
||||
if (!data->io_remap_addr) {
|
||||
dev_err(&plat_dev->dev, "%s pci_iomap failed\n", __func__);
|
||||
ret = -ENOMEM;
|
||||
@ -982,6 +1349,7 @@ static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev)
|
||||
data->n_curnt_chip = 255;
|
||||
data->status = STATUS_RUNNING;
|
||||
data->ch = plat_dev->id;
|
||||
data->use_dma = use_dma;
|
||||
|
||||
INIT_LIST_HEAD(&data->queue);
|
||||
spin_lock_init(&data->lock);
|
||||
@ -1012,6 +1380,11 @@ static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev)
|
||||
goto err_spi_register_master;
|
||||
}
|
||||
|
||||
if (use_dma) {
|
||||
dev_info(&plat_dev->dev, "Use DMA for data transfers\n");
|
||||
pch_alloc_dma_buf(board_dat, data);
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_spi_register_master:
|
||||
@ -1031,22 +1404,27 @@ static int __devexit pch_spi_pd_remove(struct platform_device *plat_dev)
|
||||
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
|
||||
struct pch_spi_data *data = platform_get_drvdata(plat_dev);
|
||||
int count;
|
||||
unsigned long flags;
|
||||
|
||||
dev_dbg(&plat_dev->dev, "%s:[ch%d] irq=%d\n",
|
||||
__func__, plat_dev->id, board_dat->pdev->irq);
|
||||
|
||||
if (use_dma)
|
||||
pch_free_dma_buf(board_dat, data);
|
||||
|
||||
/* check for any pending messages; no action is taken if the queue
|
||||
* is still full; but at least we tried. Unload anyway */
|
||||
count = 500;
|
||||
spin_lock(&data->lock);
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
data->status = STATUS_EXITING;
|
||||
while ((list_empty(&data->queue) == 0) && --count) {
|
||||
dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n",
|
||||
__func__);
|
||||
spin_unlock(&data->lock);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
msleep(PCH_SLEEP_TIME);
|
||||
spin_lock(&data->lock);
|
||||
spin_lock_irqsave(&data->lock, flags);
|
||||
}
|
||||
spin_unlock(&data->lock);
|
||||
spin_unlock_irqrestore(&data->lock, flags);
|
||||
|
||||
pch_spi_free_resources(board_dat, data);
|
||||
/* disable interrupts & free IRQ */
|
||||
@ -1083,8 +1461,8 @@ static int pch_spi_pd_suspend(struct platform_device *pd_dev,
|
||||
/* check if the current message is processed:
|
||||
Only after thats done the transfer will be suspended */
|
||||
count = 255;
|
||||
while ((--count) > 0)
|
||||
if (!(data->bcurrent_msg_processing)) {
|
||||
while ((--count) > 0) {
|
||||
if (!(data->bcurrent_msg_processing))
|
||||
break;
|
||||
msleep(PCH_SLEEP_TIME);
|
||||
}
|
||||
@ -1328,5 +1706,9 @@ static void __exit pch_spi_exit(void)
|
||||
}
|
||||
module_exit(pch_spi_exit);
|
||||
|
||||
module_param(use_dma, int, 0644);
|
||||
MODULE_PARM_DESC(use_dma,
|
||||
"to use DMA for data transfers pass 1 else 0; default 1");
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH SPI Driver");
|
||||
|
Loading…
Reference in New Issue
Block a user