From 1f023297f7f77d434ecc221018d2e181eac0ae36 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 00:16:31 +0300 Subject: [PATCH 1/6] i2c: slave eeprom: clean up sysfs bin attribute read()/write() The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Note, on file size overflow read() now returns 0, and this is a correct and expected EOF notification according to POSIX. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-slave-eeprom.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c index 822374654609..1da449614779 100644 --- a/drivers/i2c/i2c-slave-eeprom.c +++ b/drivers/i2c/i2c-slave-eeprom.c @@ -80,9 +80,6 @@ static ssize_t i2c_slave_eeprom_bin_read(struct file *filp, struct kobject *kobj struct eeprom_data *eeprom; unsigned long flags; - if (off + count > attr->size) - return -EFBIG; - eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj)); spin_lock_irqsave(&eeprom->buffer_lock, flags); @@ -98,9 +95,6 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kob struct eeprom_data *eeprom; unsigned long flags; - if (off + count > attr->size) - return -EFBIG; - eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj)); spin_lock_irqsave(&eeprom->buffer_lock, flags); From d12c0aaf3780c5b26b4ea9e795252381f586c063 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 00:18:51 +0300 Subject: [PATCH 2/6] misc: eeprom: at24: clean up at24_bin_write() The change removes redundant sysfs binary file boundary check, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang --- drivers/misc/eeprom/at24.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 2d3db81be099..6ded3dc36644 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -438,9 +438,6 @@ static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, { struct at24_data *at24; - if (unlikely(off >= attr->size)) - return -EFBIG; - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); return at24_write(at24, buf, off, count); } From 8b06260836ab47abbb5ea49d889660a0ed8adf90 Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Wed, 8 Jul 2015 16:35:06 +0200 Subject: [PATCH 3/6] i2c: core: only use set_scl for bus recovery after calling prepare_recovery Using set_scl may be ineffective before calling the driver specific prepare_recovery callback, which might change into a test mode. So instead of setting SCL in i2c_generic_scl_recovery, move it to i2c_generic_recovery (after the optional prepare_recovery). Signed-off-by: Jan Luebbe Acked-by: Alexander Sverdlin Tested-by: Alexander Sverdlin Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e6d4935161e4..8b64cf38beac 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -567,6 +567,9 @@ static int i2c_generic_recovery(struct i2c_adapter *adap) if (bri->prepare_recovery) bri->prepare_recovery(adap); + bri->set_scl(adap, val); + ndelay(RECOVERY_NDELAY); + /* * By this time SCL is high, as we need to give 9 falling-rising edges */ @@ -597,7 +600,6 @@ static int i2c_generic_recovery(struct i2c_adapter *adap) int i2c_generic_scl_recovery(struct i2c_adapter *adap) { - adap->bus_recovery_info->set_scl(adap, 1); return i2c_generic_recovery(adap); } EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery); From 828e66c0edf97bcb79b59b1ddd803a50629b3937 Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Wed, 8 Jul 2015 16:35:27 +0200 Subject: [PATCH 4/6] i2c: omap: fix bus recovery setup At least on the AM335x, enabling OMAP_I2C_SYSTEST_ST_EN is not enough to allow direct access to the SCL and SDA pins. In addition to ST_EN, we need to set the TMODE to 0b11 (Loop back & SDA/SCL IO mode select). Also, as the reset values of SCL_O and SDA_O are 0 (which means "drive low level"), we need to set them to 1 (which means "high-impedance") to avoid unwanted changes on the pins. As a precaution, reset all these bits to their default values after recovery is complete. Signed-off-by: Jan Luebbe Tested-by: Alexander Sverdlin Reviewed-by: Grygorii Strashko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index d1c22e3fdd14..fc9bf7f30e35 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1247,7 +1247,14 @@ static void omap_i2c_prepare_recovery(struct i2c_adapter *adap) u32 reg; reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); + /* enable test mode */ reg |= OMAP_I2C_SYSTEST_ST_EN; + /* select SDA/SCL IO mode */ + reg |= 3 << OMAP_I2C_SYSTEST_TMODE_SHIFT; + /* set SCL to high-impedance state (reset value is 0) */ + reg |= OMAP_I2C_SYSTEST_SCL_O; + /* set SDA to high-impedance state (reset value is 0) */ + reg |= OMAP_I2C_SYSTEST_SDA_O; omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg); } @@ -1257,7 +1264,11 @@ static void omap_i2c_unprepare_recovery(struct i2c_adapter *adap) u32 reg; reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); + /* restore reset values */ reg &= ~OMAP_I2C_SYSTEST_ST_EN; + reg &= ~OMAP_I2C_SYSTEST_TMODE_MASK; + reg &= ~OMAP_I2C_SYSTEST_SCL_O; + reg &= ~OMAP_I2C_SYSTEST_SDA_O; omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg); } From e952849a02524a247967bf7105f36fbb13cd00c2 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 28 Jul 2015 20:11:23 +0900 Subject: [PATCH 5/6] i2c: Fix typo in i2c-bfin-twi.c This patch fix some typos found in a printk message and MODULE_DESCRIPTION. Signed-off-by: Masanari Iida Acked-by: Sonic Zhang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bfin-twi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index af162b4c7a6d..025686d41640 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -692,7 +692,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, iface); - dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Contoller, " + dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, " "regs_base@%p\n", iface->regs_base); return 0; @@ -735,6 +735,6 @@ subsys_initcall(i2c_bfin_twi_init); module_exit(i2c_bfin_twi_exit); MODULE_AUTHOR("Bryan Wu, Sonic Zhang"); -MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Contoller Driver"); +MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:i2c-bfin-twi"); From e3311469734093724b10c2a81c1193197db03b78 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 17:30:48 +0300 Subject: [PATCH 6/6] i2c: fix leaked device refcount on of_find_i2c_* error path If of_find_i2c_device_by_node() or of_find_i2c_adapter_by_node() find a device by node, but its type does not match, a reference to that device is still held. This change fixes the problem. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 8b64cf38beac..c83e4d13cfc5 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1340,13 +1340,17 @@ static int of_dev_node_match(struct device *dev, void *data) struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) { struct device *dev; + struct i2c_client *client; - dev = bus_find_device(&i2c_bus_type, NULL, node, - of_dev_node_match); + dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match); if (!dev) return NULL; - return i2c_verify_client(dev); + client = i2c_verify_client(dev); + if (!client) + put_device(dev); + + return client; } EXPORT_SYMBOL(of_find_i2c_device_by_node); @@ -1354,13 +1358,17 @@ EXPORT_SYMBOL(of_find_i2c_device_by_node); struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) { struct device *dev; + struct i2c_adapter *adapter; - dev = bus_find_device(&i2c_bus_type, NULL, node, - of_dev_node_match); + dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match); if (!dev) return NULL; - return i2c_verify_adapter(dev); + adapter = i2c_verify_adapter(dev); + if (!adapter) + put_device(dev); + + return adapter; } EXPORT_SYMBOL(of_find_i2c_adapter_by_node); #else