[media] rtl28xxu: convert to new DVB USB
Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Antti Palosaari
Mauro Carvalho Chehab
parent
d584b8386e
commit
c01a35955f
@ -124,3 +124,16 @@ config DVB_USB_MXL111SF
|
||||
help
|
||||
Say Y here to support the MxL111SF USB2.0 DTV receiver.
|
||||
|
||||
config DVB_USB_RTL28XXU
|
||||
tristate "Realtek RTL28xxU DVB USB support"
|
||||
depends on DVB_USB_V2 && EXPERIMENTAL
|
||||
select DVB_RTL2830
|
||||
select DVB_RTL2832
|
||||
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
|
||||
help
|
||||
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
|
||||
|
||||
|
||||
@ -36,6 +36,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
|
||||
obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o
|
||||
obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
|
||||
|
||||
dvb-usb-rtl28xxu-objs = rtl28xxu.o
|
||||
obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
|
||||
|
||||
ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
|
||||
ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/
|
||||
ccflags-y += -I$(srctree)/drivers/media/common/tuners
|
||||
|
||||
@ -31,10 +31,6 @@
|
||||
#include "fc0012.h"
|
||||
#include "fc0013.h"
|
||||
|
||||
/* debug */
|
||||
static int dvb_usb_rtl28xxu_debug;
|
||||
module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644);
|
||||
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
|
||||
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
||||
|
||||
static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
|
||||
@ -66,8 +62,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
|
||||
if (ret > 0)
|
||||
ret = 0;
|
||||
|
||||
deb_dump(0, requesttype, req->value, req->index, buf, req->size,
|
||||
deb_xfer);
|
||||
deb_dump(0, requesttype, req->value, req->index, buf, req->size);
|
||||
|
||||
/* read request, copy returned data to return buf */
|
||||
if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
|
||||
@ -80,7 +75,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -291,7 +286,8 @@ static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = {
|
||||
static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
int ret;
|
||||
struct rtl28xxu_priv *priv = adap->dev->priv;
|
||||
struct dvb_usb_device *d = adap_to_d(adap);
|
||||
struct rtl28xxu_priv *priv = d_to_priv(d);
|
||||
u8 buf[1];
|
||||
struct rtl2830_config *rtl2830_config;
|
||||
/* open RTL2831U/RTL2830 I2C gate */
|
||||
@ -301,7 +297,7 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
/* for QT1010 tuner probe */
|
||||
struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf };
|
||||
|
||||
deb_info("%s:\n", __func__);
|
||||
dev_dbg(&d->udev->dev, "%s:\n", __func__);
|
||||
|
||||
/*
|
||||
* RTL2831U GPIOs
|
||||
@ -312,12 +308,12 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
*/
|
||||
|
||||
/* GPIO direction */
|
||||
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
|
||||
ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* enable as output GPIO0, GPIO2, GPIO4 */
|
||||
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
|
||||
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
@ -330,58 +326,58 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
msleep(20);
|
||||
|
||||
/* open demod I2C gate */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_gate);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* check QT1010 ID(?) register; reg=0f val=2c */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_qt1010);
|
||||
if (ret == 0 && buf[0] == 0x2c) {
|
||||
priv->tuner = TUNER_RTL2830_QT1010;
|
||||
rtl2830_config = &rtl28xxu_rtl2830_qt1010_config;
|
||||
deb_info("%s: QT1010\n", __func__);
|
||||
dev_dbg(&d->udev->dev, "%s: QT1010\n", __func__);
|
||||
goto found;
|
||||
} else {
|
||||
deb_info("%s: QT1010 probe failed=%d - %02x\n",
|
||||
__func__, ret, buf[0]);
|
||||
dev_dbg(&d->udev->dev, "%s: QT1010 probe failed=%d - %02x\n",
|
||||
__func__, ret, buf[0]);
|
||||
}
|
||||
|
||||
/* open demod I2C gate */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_gate);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* check MT2060 ID register; reg=00 val=63 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_mt2060);
|
||||
if (ret == 0 && buf[0] == 0x63) {
|
||||
priv->tuner = TUNER_RTL2830_MT2060;
|
||||
rtl2830_config = &rtl28xxu_rtl2830_mt2060_config;
|
||||
deb_info("%s: MT2060\n", __func__);
|
||||
dev_dbg(&d->udev->dev, "%s: MT2060\n", __func__);
|
||||
goto found;
|
||||
} else {
|
||||
deb_info("%s: MT2060 probe failed=%d - %02x\n",
|
||||
__func__, ret, buf[0]);
|
||||
dev_dbg(&d->udev->dev, "%s: MT2060 probe failed=%d - %02x\n",
|
||||
__func__, ret, buf[0]);
|
||||
}
|
||||
|
||||
/* assume MXL5005S */
|
||||
ret = 0;
|
||||
priv->tuner = TUNER_RTL2830_MXL5005S;
|
||||
rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config;
|
||||
deb_info("%s: MXL5005S\n", __func__);
|
||||
dev_dbg(&d->udev->dev, "%s: MXL5005S\n", __func__);
|
||||
goto found;
|
||||
|
||||
found:
|
||||
/* attach demodulator */
|
||||
adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe_adap[0].fe == NULL) {
|
||||
adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config,
|
||||
&d->i2c_adap);
|
||||
if (adap->fe[0] == NULL) {
|
||||
ret = -ENODEV;
|
||||
goto err;
|
||||
}
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -405,7 +401,8 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
|
||||
int ret;
|
||||
u8 val;
|
||||
|
||||
deb_info("%s cmd=%d arg=%d\n", __func__, cmd, arg);
|
||||
dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);
|
||||
|
||||
switch (cmd) {
|
||||
case FC_FE_CALLBACK_VHF_ENABLE:
|
||||
/* set output values */
|
||||
@ -430,8 +427,7 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
|
||||
return 0;
|
||||
|
||||
err:
|
||||
err("%s: failed=%d\n", __func__, ret);
|
||||
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -476,15 +472,12 @@ static int rtl2832u_frontend_callback(void *adapter_priv, int component,
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
int ret;
|
||||
struct rtl28xxu_priv *priv = adap->dev->priv;
|
||||
struct dvb_usb_device *d = adap_to_d(adap);
|
||||
struct rtl28xxu_priv *priv = d_to_priv(d);
|
||||
struct rtl2832_config *rtl2832_config;
|
||||
|
||||
u8 buf[2], val;
|
||||
/* open RTL2832U/RTL2832 I2C gate */
|
||||
struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
|
||||
@ -511,167 +504,173 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
/* for TDA18272 tuner probe */
|
||||
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
|
||||
|
||||
deb_info("%s:\n", __func__);
|
||||
dev_dbg(&d->udev->dev, "%s:\n", __func__);
|
||||
|
||||
|
||||
ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_DIR, &val);
|
||||
ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
val &= 0xbf;
|
||||
|
||||
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, val);
|
||||
ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
|
||||
/* enable as output GPIO3 and GPIO6*/
|
||||
ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_EN, &val);
|
||||
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
val |= 0x48;
|
||||
|
||||
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, val);
|
||||
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* Probe used tuner. We need to know used tuner before demod attach
|
||||
* since there is some demod params needed to set according to tuner.
|
||||
*/
|
||||
|
||||
/* open demod I2C gate */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
priv->tuner = TUNER_NONE;
|
||||
|
||||
/* check FC0012 ID register; reg=00 val=a1 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0012);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
|
||||
if (ret == 0 && buf[0] == 0xa1) {
|
||||
priv->tuner = TUNER_RTL2832_FC0012;
|
||||
rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
|
||||
info("%s: FC0012 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: FC0012 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto found;
|
||||
}
|
||||
|
||||
/* check FC0013 ID register; reg=00 val=a3 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0013);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
|
||||
if (ret == 0 && buf[0] == 0xa3) {
|
||||
priv->tuner = TUNER_RTL2832_FC0013;
|
||||
rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
|
||||
info("%s: FC0013 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: FC0013 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto found;
|
||||
}
|
||||
|
||||
/* check MT2266 ID register; reg=00 val=85 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2266);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
|
||||
if (ret == 0 && buf[0] == 0x85) {
|
||||
priv->tuner = TUNER_RTL2832_MT2266;
|
||||
/* TODO implement tuner */
|
||||
info("%s: MT2266 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: MT2266 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
/* check FC2580 ID register; reg=01 val=56 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
|
||||
if (ret == 0 && buf[0] == 0x56) {
|
||||
priv->tuner = TUNER_RTL2832_FC2580;
|
||||
/* TODO implement tuner */
|
||||
info("%s: FC2580 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: FC2580 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
/* check MT2063 ID register; reg=00 val=9e || 9c */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2063);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
|
||||
if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
|
||||
priv->tuner = TUNER_RTL2832_MT2063;
|
||||
/* TODO implement tuner */
|
||||
info("%s: MT2063 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: MT2063 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
/* check MAX3543 ID register; reg=00 val=38 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_max3543);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_max3543);
|
||||
if (ret == 0 && buf[0] == 0x38) {
|
||||
priv->tuner = TUNER_RTL2832_MAX3543;
|
||||
/* TODO implement tuner */
|
||||
info("%s: MAX3534 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: MAX3534 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
/* check TUA9001 ID register; reg=7e val=2328 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_tua9001);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
|
||||
if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
|
||||
priv->tuner = TUNER_RTL2832_TUA9001;
|
||||
/* TODO implement tuner */
|
||||
info("%s: TUA9001 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: TUA9001 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
/* check MXL5007R ID register; reg=d9 val=14 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mxl5007t);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
|
||||
if (ret == 0 && buf[0] == 0x14) {
|
||||
priv->tuner = TUNER_RTL2832_MXL5007T;
|
||||
/* TODO implement tuner */
|
||||
info("%s: MXL5007T tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: MXL5007T tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
/* check E4000 ID register; reg=02 val=40 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_e4000);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_e4000);
|
||||
if (ret == 0 && buf[0] == 0x40) {
|
||||
priv->tuner = TUNER_RTL2832_E4000;
|
||||
/* TODO implement tuner */
|
||||
info("%s: E4000 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: E4000 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
/* check TDA18272 ID register; reg=00 val=c760 */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_tda18272);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
|
||||
if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
|
||||
priv->tuner = TUNER_RTL2832_TDA18272;
|
||||
/* TODO implement tuner */
|
||||
info("%s: TDA18272 tuner found", __func__);
|
||||
dev_info(&d->udev->dev, "%s: TDA18272 tuner found",
|
||||
KBUILD_MODNAME);
|
||||
goto unsupported;
|
||||
}
|
||||
|
||||
unsupported:
|
||||
/* close demod I2C gate */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* tuner not found */
|
||||
deb_info("No compatible tuner found");
|
||||
dev_dbg(&d->udev->dev, "%s: No compatible tuner found\n", __func__);
|
||||
ret = -ENODEV;
|
||||
return ret;
|
||||
|
||||
found:
|
||||
/* close demod I2C gate */
|
||||
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
|
||||
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* attach demodulator */
|
||||
adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe_adap[0].fe == NULL) {
|
||||
adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config,
|
||||
&d->i2c_adap);
|
||||
if (adap->fe[0] == NULL) {
|
||||
ret = -ENODEV;
|
||||
goto err;
|
||||
}
|
||||
|
||||
/* set fe callbacks */
|
||||
adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback;
|
||||
adap->fe[0]->callback = rtl2832u_frontend_callback;
|
||||
|
||||
return ret;
|
||||
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -704,32 +703,34 @@ static struct mxl5005s_config rtl28xxu_mxl5005s_config = {
|
||||
static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
int ret;
|
||||
struct rtl28xxu_priv *priv = adap->dev->priv;
|
||||
struct dvb_usb_device *d = adap_to_d(adap);
|
||||
struct rtl28xxu_priv *priv = d_to_priv(d);
|
||||
struct i2c_adapter *rtl2830_tuner_i2c;
|
||||
struct dvb_frontend *fe;
|
||||
|
||||
deb_info("%s:\n", __func__);
|
||||
dev_dbg(&d->udev->dev, "%s:\n", __func__);
|
||||
|
||||
/* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
|
||||
rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe);
|
||||
rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]);
|
||||
|
||||
switch (priv->tuner) {
|
||||
case TUNER_RTL2830_QT1010:
|
||||
fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe,
|
||||
fe = dvb_attach(qt1010_attach, adap->fe[0],
|
||||
rtl2830_tuner_i2c, &rtl28xxu_qt1010_config);
|
||||
break;
|
||||
case TUNER_RTL2830_MT2060:
|
||||
fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe,
|
||||
fe = dvb_attach(mt2060_attach, adap->fe[0],
|
||||
rtl2830_tuner_i2c, &rtl28xxu_mt2060_config,
|
||||
1220);
|
||||
break;
|
||||
case TUNER_RTL2830_MXL5005S:
|
||||
fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
|
||||
fe = dvb_attach(mxl5005s_attach, adap->fe[0],
|
||||
rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config);
|
||||
break;
|
||||
default:
|
||||
fe = NULL;
|
||||
err("unknown tuner=%d", priv->tuner);
|
||||
dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
|
||||
priv->tuner);
|
||||
}
|
||||
|
||||
if (fe == NULL) {
|
||||
@ -739,40 +740,42 @@ static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
|
||||
return 0;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
int ret;
|
||||
struct rtl28xxu_priv *priv = adap->dev->priv;
|
||||
struct dvb_usb_device *d = adap_to_d(adap);
|
||||
struct rtl28xxu_priv *priv = d_to_priv(d);
|
||||
struct dvb_frontend *fe;
|
||||
|
||||
deb_info("%s:\n", __func__);
|
||||
dev_dbg(&d->udev->dev, "%s:\n", __func__);
|
||||
|
||||
switch (priv->tuner) {
|
||||
case TUNER_RTL2832_FC0012:
|
||||
fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe,
|
||||
&adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
|
||||
fe = dvb_attach(fc0012_attach, adap->fe[0],
|
||||
&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
|
||||
|
||||
/* since fc0012 includs reading the signal strength delegate
|
||||
* that to the tuner driver */
|
||||
adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0].
|
||||
fe->ops.tuner_ops.get_rf_strength;
|
||||
adap->fe[0]->ops.read_signal_strength =
|
||||
adap->fe[0]->ops.tuner_ops.get_rf_strength;
|
||||
return 0;
|
||||
break;
|
||||
case TUNER_RTL2832_FC0013:
|
||||
fe = dvb_attach(fc0013_attach, adap->fe_adap[0].fe,
|
||||
&adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
|
||||
fe = dvb_attach(fc0013_attach, adap->fe[0],
|
||||
&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
|
||||
|
||||
/* fc0013 also supports signal strength reading */
|
||||
adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0]
|
||||
.fe->ops.tuner_ops.get_rf_strength;
|
||||
adap->fe[0]->ops.read_signal_strength =
|
||||
adap->fe[0]->ops.tuner_ops.get_rf_strength;
|
||||
return 0;
|
||||
default:
|
||||
fe = NULL;
|
||||
err("unknown tuner=%d", priv->tuner);
|
||||
dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
|
||||
priv->tuner);
|
||||
}
|
||||
|
||||
if (fe == NULL) {
|
||||
@ -782,18 +785,53 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
|
||||
return 0;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
|
||||
static int rtl28xxu_init(struct dvb_usb_device *d)
|
||||
{
|
||||
int ret;
|
||||
u8 val;
|
||||
|
||||
dev_dbg(&d->udev->dev, "%s:\n", __func__);
|
||||
|
||||
/* init USB endpoints */
|
||||
ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* enable DMA and Full Packet Mode*/
|
||||
val |= 0x09;
|
||||
ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* set EPA maximum packet size to 0x0200 */
|
||||
ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* change EPA FIFO length */
|
||||
ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
return ret;
|
||||
err:
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rtl2831u_streaming_ctrl(struct dvb_frontend *fe , int onoff)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[2], gpio;
|
||||
struct dvb_usb_device *d = fe_to_d(fe);
|
||||
|
||||
deb_info("%s: onoff=%d\n", __func__, onoff);
|
||||
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
|
||||
|
||||
ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio);
|
||||
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
@ -807,27 +845,27 @@ static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
|
||||
gpio &= (~0x04); /* LED off */
|
||||
}
|
||||
|
||||
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio);
|
||||
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
|
||||
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
|
||||
static int rtl2832u_streaming_ctrl(struct dvb_frontend *fe , int onoff)
|
||||
{
|
||||
int ret;
|
||||
u8 buf[2];
|
||||
struct dvb_usb_device *d = fe_to_d(fe);
|
||||
|
||||
deb_info("%s: onoff=%d\n", __func__, onoff);
|
||||
|
||||
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
|
||||
|
||||
if (onoff) {
|
||||
buf[0] = 0x00;
|
||||
@ -837,13 +875,13 @@ static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
|
||||
buf[1] = 0x02; /* reset EPA */
|
||||
}
|
||||
|
||||
ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
|
||||
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -852,7 +890,7 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
int ret;
|
||||
u8 gpio, sys0;
|
||||
|
||||
deb_info("%s: onoff=%d\n", __func__, onoff);
|
||||
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
|
||||
|
||||
/* demod adc */
|
||||
ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0);
|
||||
@ -864,7 +902,8 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
|
||||
dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
|
||||
sys0, gpio);
|
||||
|
||||
if (onoff) {
|
||||
gpio |= 0x01; /* GPIO0 = 1 */
|
||||
@ -877,7 +916,8 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
sys0 = sys0 & (~0xc0);
|
||||
}
|
||||
|
||||
deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
|
||||
dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
|
||||
sys0, gpio);
|
||||
|
||||
/* demod adc */
|
||||
ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
|
||||
@ -891,7 +931,7 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -900,7 +940,7 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
int ret;
|
||||
u8 val;
|
||||
|
||||
deb_info("%s: onoff=%d\n", __func__, onoff);
|
||||
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
|
||||
|
||||
if (onoff) {
|
||||
/* set output values */
|
||||
@ -1012,7 +1052,7 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -1085,10 +1125,21 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d)
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
|
||||
struct dvb_usb_rc *rc)
|
||||
{
|
||||
rc->map_name = RC_MAP_EMPTY;
|
||||
rc->allowed_protos = RC_TYPE_NEC;
|
||||
rc->query = rtl2831u_rc_query;
|
||||
rc->interval = 400;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rtl2832u_rc_query(struct dvb_usb_device *d)
|
||||
{
|
||||
int ret, i;
|
||||
@ -1146,281 +1197,95 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
|
||||
exit:
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
enum rtl28xxu_usb_table_entry {
|
||||
RTL2831U_0BDA_2831,
|
||||
RTL2831U_14AA_0160,
|
||||
RTL2831U_14AA_0161,
|
||||
RTL2832U_0CCD_00A9,
|
||||
RTL2832U_1F4D_B803,
|
||||
RTL2832U_0CCD_00B3,
|
||||
};
|
||||
static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
|
||||
struct dvb_usb_rc *rc)
|
||||
{
|
||||
rc->map_name = RC_MAP_EMPTY;
|
||||
rc->allowed_protos = RC_TYPE_NEC;
|
||||
rc->query = rtl2832u_rc_query;
|
||||
rc->interval = 400;
|
||||
|
||||
static struct usb_device_id rtl28xxu_table[] = {
|
||||
/* RTL2831U */
|
||||
[RTL2831U_0BDA_2831] = {
|
||||
USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)},
|
||||
[RTL2831U_14AA_0160] = {
|
||||
USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)},
|
||||
[RTL2831U_14AA_0161] = {
|
||||
USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)},
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* RTL2832U */
|
||||
[RTL2832U_0CCD_00A9] = {
|
||||
USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)},
|
||||
[RTL2832U_1F4D_B803] = {
|
||||
USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT)},
|
||||
[RTL2832U_0CCD_00B3] = {
|
||||
USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK)},
|
||||
{} /* terminating entry */
|
||||
};
|
||||
static const struct dvb_usb_device_properties rtl2831u_props = {
|
||||
.driver_name = KBUILD_MODNAME,
|
||||
.owner = THIS_MODULE,
|
||||
.adapter_nr = adapter_nr,
|
||||
.size_of_priv = sizeof(struct rtl28xxu_priv),
|
||||
|
||||
MODULE_DEVICE_TABLE(usb, rtl28xxu_table);
|
||||
.power_ctrl = rtl2831u_power_ctrl,
|
||||
.i2c_algo = &rtl28xxu_i2c_algo,
|
||||
.frontend_attach = rtl2831u_frontend_attach,
|
||||
.tuner_attach = rtl2831u_tuner_attach,
|
||||
.init = rtl28xxu_init,
|
||||
.get_rc_config = rtl2831u_get_rc_config,
|
||||
.streaming_ctrl = rtl2831u_streaming_ctrl,
|
||||
|
||||
static struct dvb_usb_device_properties rtl28xxu_properties[] = {
|
||||
{
|
||||
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
||||
|
||||
.usb_ctrl = DEVICE_SPECIFIC,
|
||||
.no_reconnect = 1,
|
||||
|
||||
.size_of_priv = sizeof(struct rtl28xxu_priv),
|
||||
|
||||
.num_adapters = 1,
|
||||
.adapter = {
|
||||
{
|
||||
.num_frontends = 1,
|
||||
.fe = {
|
||||
{
|
||||
.frontend_attach = rtl2831u_frontend_attach,
|
||||
.tuner_attach = rtl2831u_tuner_attach,
|
||||
.streaming_ctrl = rtl2831u_streaming_ctrl,
|
||||
.stream = {
|
||||
.type = USB_BULK,
|
||||
.count = 6,
|
||||
.endpoint = 0x81,
|
||||
.u = {
|
||||
.bulk = {
|
||||
.buffersize = 8*512,
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
.num_adapters = 1,
|
||||
.adapter = {
|
||||
{
|
||||
.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
|
||||
},
|
||||
|
||||
.power_ctrl = rtl2831u_power_ctrl,
|
||||
|
||||
.rc.core = {
|
||||
.protocol = RC_TYPE_NEC,
|
||||
.module_name = "rtl28xxu",
|
||||
.rc_query = rtl2831u_rc_query,
|
||||
.rc_interval = 400,
|
||||
.allowed_protos = RC_TYPE_NEC,
|
||||
.rc_codes = RC_MAP_EMPTY,
|
||||
},
|
||||
|
||||
.i2c_algo = &rtl28xxu_i2c_algo,
|
||||
|
||||
.num_device_descs = 2,
|
||||
.devices = {
|
||||
{
|
||||
.name = "Realtek RTL2831U reference design",
|
||||
.warm_ids = {
|
||||
&rtl28xxu_table[RTL2831U_0BDA_2831],
|
||||
},
|
||||
},
|
||||
{
|
||||
.name = "Freecom USB2.0 DVB-T",
|
||||
.warm_ids = {
|
||||
&rtl28xxu_table[RTL2831U_14AA_0160],
|
||||
&rtl28xxu_table[RTL2831U_14AA_0161],
|
||||
},
|
||||
},
|
||||
}
|
||||
},
|
||||
{
|
||||
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
||||
};
|
||||
|
||||
.usb_ctrl = DEVICE_SPECIFIC,
|
||||
.no_reconnect = 1,
|
||||
static const struct dvb_usb_device_properties rtl2832u_props = {
|
||||
.driver_name = KBUILD_MODNAME,
|
||||
.owner = THIS_MODULE,
|
||||
.adapter_nr = adapter_nr,
|
||||
.size_of_priv = sizeof(struct rtl28xxu_priv),
|
||||
|
||||
.size_of_priv = sizeof(struct rtl28xxu_priv),
|
||||
.power_ctrl = rtl2832u_power_ctrl,
|
||||
.i2c_algo = &rtl28xxu_i2c_algo,
|
||||
.frontend_attach = rtl2832u_frontend_attach,
|
||||
.tuner_attach = rtl2832u_tuner_attach,
|
||||
.init = rtl28xxu_init,
|
||||
.get_rc_config = rtl2832u_get_rc_config,
|
||||
.streaming_ctrl = rtl2832u_streaming_ctrl,
|
||||
|
||||
.num_adapters = 1,
|
||||
.adapter = {
|
||||
{
|
||||
.num_frontends = 1,
|
||||
.fe = {
|
||||
{
|
||||
.frontend_attach = rtl2832u_frontend_attach,
|
||||
.tuner_attach = rtl2832u_tuner_attach,
|
||||
.streaming_ctrl = rtl2832u_streaming_ctrl,
|
||||
.stream = {
|
||||
.type = USB_BULK,
|
||||
.count = 6,
|
||||
.endpoint = 0x81,
|
||||
.u = {
|
||||
.bulk = {
|
||||
.buffersize = 8*512,
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
.num_adapters = 1,
|
||||
.adapter = {
|
||||
{
|
||||
.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
|
||||
},
|
||||
|
||||
.power_ctrl = rtl2832u_power_ctrl,
|
||||
|
||||
.rc.core = {
|
||||
.protocol = RC_TYPE_NEC,
|
||||
.module_name = "rtl28xxu",
|
||||
.rc_query = rtl2832u_rc_query,
|
||||
.rc_interval = 400,
|
||||
.allowed_protos = RC_TYPE_NEC,
|
||||
.rc_codes = RC_MAP_EMPTY,
|
||||
},
|
||||
|
||||
.i2c_algo = &rtl28xxu_i2c_algo,
|
||||
|
||||
.num_device_descs = 3,
|
||||
.devices = {
|
||||
{
|
||||
.name = "Terratec Cinergy T Stick Black",
|
||||
.warm_ids = {
|
||||
&rtl28xxu_table[RTL2832U_0CCD_00A9],
|
||||
},
|
||||
},
|
||||
{
|
||||
.name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T",
|
||||
.warm_ids = {
|
||||
&rtl28xxu_table[RTL2832U_1F4D_B803],
|
||||
},
|
||||
},
|
||||
{
|
||||
.name = "NOXON DAB/DAB+ USB dongle",
|
||||
.warm_ids = {
|
||||
&rtl28xxu_table[RTL2832U_0CCD_00B3],
|
||||
},
|
||||
},
|
||||
}
|
||||
},
|
||||
|
||||
};
|
||||
|
||||
static int rtl28xxu_probe(struct usb_interface *intf,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
int ret, i;
|
||||
u8 val;
|
||||
int properties_count = ARRAY_SIZE(rtl28xxu_properties);
|
||||
struct dvb_usb_device *d;
|
||||
struct usb_device *udev;
|
||||
bool found;
|
||||
static const struct usb_device_id rtl28xxu_id_table[] = {
|
||||
{ DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U,
|
||||
&rtl2831u_props, "Realtek RTL2831U reference design", NULL) },
|
||||
{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT,
|
||||
&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
|
||||
{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2,
|
||||
&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
|
||||
|
||||
deb_info("%s: interface=%d\n", __func__,
|
||||
intf->cur_altsetting->desc.bInterfaceNumber);
|
||||
{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
|
||||
&rtl2832u_props, "Terratec Cinergy T Stick Black", NULL) },
|
||||
{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
|
||||
&rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
|
||||
{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
|
||||
&rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
|
||||
|
||||
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
|
||||
return 0;
|
||||
|
||||
/* Dynamic USB ID support. Replaces first device ID with current one .*/
|
||||
udev = interface_to_usbdev(intf);
|
||||
|
||||
for (i = 0, found = false; i < ARRAY_SIZE(rtl28xxu_table) - 1; i++) {
|
||||
if (rtl28xxu_table[i].idVendor ==
|
||||
le16_to_cpu(udev->descriptor.idVendor) &&
|
||||
rtl28xxu_table[i].idProduct ==
|
||||
le16_to_cpu(udev->descriptor.idProduct)) {
|
||||
found = true;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (!found) {
|
||||
deb_info("%s: using dynamic ID %04x:%04x\n", __func__,
|
||||
le16_to_cpu(udev->descriptor.idVendor),
|
||||
le16_to_cpu(udev->descriptor.idProduct));
|
||||
rtl28xxu_properties[0].devices[0].warm_ids[0]->idVendor =
|
||||
le16_to_cpu(udev->descriptor.idVendor);
|
||||
rtl28xxu_properties[0].devices[0].warm_ids[0]->idProduct =
|
||||
le16_to_cpu(udev->descriptor.idProduct);
|
||||
}
|
||||
|
||||
for (i = 0; i < properties_count; i++) {
|
||||
ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i],
|
||||
THIS_MODULE, &d, adapter_nr);
|
||||
if (ret == 0 || ret != -ENODEV)
|
||||
break;
|
||||
}
|
||||
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
|
||||
/* init USB endpoints */
|
||||
ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* enable DMA and Full Packet Mode*/
|
||||
val |= 0x09;
|
||||
ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* set EPA maximum packet size to 0x0200 */
|
||||
ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
/* change EPA FIFO length */
|
||||
ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
return ret;
|
||||
err:
|
||||
deb_info("%s: failed=%d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct usb_driver rtl28xxu_driver = {
|
||||
.name = "dvb_usb_rtl28xxu",
|
||||
.probe = rtl28xxu_probe,
|
||||
.disconnect = dvb_usb_device_exit,
|
||||
.id_table = rtl28xxu_table,
|
||||
static struct usb_driver rtl28xxu_usb_driver = {
|
||||
.name = KBUILD_MODNAME,
|
||||
.id_table = rtl28xxu_id_table,
|
||||
.probe = dvb_usbv2_probe,
|
||||
.disconnect = dvb_usbv2_disconnect,
|
||||
.suspend = dvb_usbv2_suspend,
|
||||
.resume = dvb_usbv2_resume,
|
||||
.no_dynamic_id = 1,
|
||||
.soft_unbind = 1,
|
||||
};
|
||||
|
||||
/* module stuff */
|
||||
static int __init rtl28xxu_module_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
deb_info("%s:\n", __func__);
|
||||
|
||||
ret = usb_register(&rtl28xxu_driver);
|
||||
if (ret)
|
||||
err("usb_register failed=%d", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void __exit rtl28xxu_module_exit(void)
|
||||
{
|
||||
deb_info("%s:\n", __func__);
|
||||
|
||||
/* deregister this driver from the USB subsystem */
|
||||
usb_deregister(&rtl28xxu_driver);
|
||||
}
|
||||
|
||||
module_init(rtl28xxu_module_init);
|
||||
module_exit(rtl28xxu_module_exit);
|
||||
module_usb_driver(rtl28xxu_usb_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
|
||||
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
||||
@ -22,27 +22,17 @@
|
||||
#ifndef RTL28XXU_H
|
||||
#define RTL28XXU_H
|
||||
|
||||
#define DVB_USB_LOG_PREFIX "rtl28xxu"
|
||||
#include "dvb-usb.h"
|
||||
#include "dvb_usb.h"
|
||||
|
||||
#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args)
|
||||
#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args)
|
||||
#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args)
|
||||
#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args)
|
||||
#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args)
|
||||
#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args)
|
||||
|
||||
#define deb_dump(r, t, v, i, b, l, func) { \
|
||||
int loop_; \
|
||||
func("%02x %02x %02x %02x %02x %02x %02x %02x", \
|
||||
t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
|
||||
#define deb_dump(r, t, v, i, b, l) { \
|
||||
char *direction; \
|
||||
if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
|
||||
func(" >>> "); \
|
||||
direction = ">>>"; \
|
||||
else \
|
||||
func(" <<< "); \
|
||||
for (loop_ = 0; loop_ < l; loop_++) \
|
||||
func("%02x ", b[loop_]); \
|
||||
func("\n");\
|
||||
direction = "<<<"; \
|
||||
dev_dbg(&d->udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \
|
||||
"%s [%d bytes]\n", __func__, t, r, v & 0xff, v >> 8, \
|
||||
i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l); \
|
||||
}
|
||||
|
||||
/*
|
||||
@ -319,16 +319,3 @@ config DVB_USB_IT913X
|
||||
help
|
||||
Say Y here to support the it913x device
|
||||
|
||||
config DVB_USB_RTL28XXU
|
||||
tristate "Realtek RTL28xxU DVB USB support"
|
||||
depends on DVB_USB && EXPERIMENTAL
|
||||
select DVB_RTL2830
|
||||
select DVB_RTL2832
|
||||
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
|
||||
select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
|
||||
help
|
||||
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
|
||||
|
||||
|
||||
@ -78,9 +78,6 @@ obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
|
||||
dvb-usb-it913x-objs := it913x.o
|
||||
obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
|
||||
|
||||
dvb-usb-rtl28xxu-objs = rtl28xxu.o
|
||||
obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
|
||||
|
||||
ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
|
||||
ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/
|
||||
# due to tuner-xc3028
|
||||
|
||||
Loading…
Reference in New Issue
Block a user