edac: i5100 add 6 ranks per channel

Add support for 6 ranks per channel to the i5100 chipset.  I have tested
the patch as far as possible with correctible errors and things appear
good.  The DIMM mapping is correct for our board, but boards may differ.

Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se>
Acked-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Nils Carlson 2009-12-15 16:47:42 -08:00 committed by Linus Torvalds
parent 295439f2a3
commit bbead2104e

View File

@ -9,6 +9,11 @@
* Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
* http://download.intel.com/design/chipsets/datashts/318378.pdf
*
* The intel 5100 has two independent channels. EDAC core currently
* can not reflect this configuration so instead the chip-select
* rows for each respective channel are layed out one after another,
* the first half belonging to channel 0, the second half belonging
* to channel 1.
*/
#include <linux/module.h>
#include <linux/init.h>
@ -734,7 +739,6 @@ static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
* fill dimm chip select map
*
* FIXME:
* o only valid for 4 ranks per channel
* o not the only way to may chip selects to dimm slots
* o investigate if there is some way to obtain this map from the bios
*/
@ -743,8 +747,6 @@ static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci)
struct i5100_priv *priv = mci->pvt_info;
int i;
WARN_ON(priv->ranksperchan != 4);
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
int j;
@ -753,12 +755,21 @@ static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci)
}
/* only 2 chip selects per slot... */
priv->dimm_csmap[0][0] = 0;
priv->dimm_csmap[0][1] = 3;
priv->dimm_csmap[1][0] = 1;
priv->dimm_csmap[1][1] = 2;
priv->dimm_csmap[2][0] = 2;
priv->dimm_csmap[3][0] = 3;
if (priv->ranksperchan == 4) {
priv->dimm_csmap[0][0] = 0;
priv->dimm_csmap[0][1] = 3;
priv->dimm_csmap[1][0] = 1;
priv->dimm_csmap[1][1] = 2;
priv->dimm_csmap[2][0] = 2;
priv->dimm_csmap[3][0] = 3;
} else {
priv->dimm_csmap[0][0] = 0;
priv->dimm_csmap[0][1] = 1;
priv->dimm_csmap[1][0] = 2;
priv->dimm_csmap[1][1] = 3;
priv->dimm_csmap[2][0] = 4;
priv->dimm_csmap[2][1] = 5;
}
}
static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev,
@ -905,13 +916,6 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
pci_read_config_dword(pdev, I5100_MS, &dw);
ranksperch = !!(dw & (1 << 8)) * 2 + 4;
if (ranksperch != 4) {
/* FIXME: get 6 ranks / channel to work - need hw... */
printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
ret = -ENODEV;
goto bail_pdev;
}
/* enable error reporting... */
pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
dw &= ~I5100_FERR_NF_MEM_ANY_MASK;