leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[PATCH] libata: return sense data in HDIO_DRIVE_CMD ioctl

Browse Source 
Make the HDIO_DRIVE_CMD ioctl in libata (ATA command pass through) return a
few ATA registers to userspace, following the same convention as the
drivers/ide implementation of the same ioctl.  This is needed to support ATA
commands like CHECK POWER MODE, which return information in nsectors.

This fixes "hdparm -C" on SATA drives.

Forcing the sense data read via the cc flag causes spurious check conditions,
so we filter these out (following the ATA command pass-through specification
T10/04-262r7).

Signed-off-by: Eran Tromer <eran@tromer.org>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Eran Tromer 2006-10-10 14:29:25 -07:00 committed by Jeff Garzik
parent 4ad99f15c6
commit bbe1fe7ea3
1 changed files with 39 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
drivers/ata/libata-scsi.c
View File

@ -164,10 +164,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
{
int rc = 0;
u8 scsi_cmd[MAX_COMMAND_SIZE];
u8 args[4], *argbuf = NULL;
u8 args[4], *argbuf = NULL, *sensebuf = NULL;
int argsize = 0;
struct scsi_sense_hdr sshdr;
enum dma_data_direction data_dir;
int cmd_result;
if (arg == NULL)
return -EINVAL;
@ -175,6 +175,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
if (copy_from_user(args, arg, sizeof(args)))
return -EFAULT;
sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
if (!sensebuf)
return -ENOMEM;
memset(scsi_cmd, 0, sizeof(scsi_cmd));
if (args[3]) {
@ -191,7 +195,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
data_dir = DMA_FROM_DEVICE;
} else {
scsi_cmd[1] = (3 << 1); /* Non-data */
/* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
data_dir = DMA_NONE;
}
@ -210,18 +214,46 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
/* Good values for timeout and retries? Values below
from scsi_ioctl_send_command() for default case... */
if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize,
&sshdr, (10*HZ), 5)) {
cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize,
sensebuf, (10*HZ), 5, 0);
if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
u8 *desc = sensebuf + 8;
cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
/* If we set cc then ATA pass-through will cause a
* check condition even if no error. Filter that. */
if (cmd_result & SAM_STAT_CHECK_CONDITION) {
struct scsi_sense_hdr sshdr;
scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
&sshdr);
if (sshdr.sense_key==0 &&
sshdr.asc==0 && sshdr.ascq==0)
cmd_result &= ~SAM_STAT_CHECK_CONDITION;
}
/* Send userspace a few ATA registers (same as drivers/ide) */
if (sensebuf[0] == 0x72 && /* format is "descriptor" */
desc[0] == 0x09 ) { /* code is "ATA Descriptor" */
args[0] = desc[13]; /* status */
args[1] = desc[3]; /* error */
args[2] = desc[5]; /* sector count (0:7) */
if (copy_to_user(arg, args, sizeof(args)))
rc = -EFAULT;
}
}
if (cmd_result) {
rc = -EIO;
goto error;
}
/* Need code to retrieve data from check condition? */
if ((argbuf)
&& copy_to_user(arg + sizeof(args), argbuf, argsize))
rc = -EFAULT;
error:
kfree(sensebuf);
kfree(argbuf);
return rc;
}