leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'x86/trampoline' into x86/urgent

Browse Source 
x86/trampoline contains an urgent commit which is necessarily on a
newer baseline.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This commit is contained in:
H. Peter Anvin 2012-05-30 12:11:26 -07:00
commit bbd771474e
1600 changed files with 64925 additions and 40663 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533 Normal file
View File

@ -0,0 +1,15 @@
What: /sys/bus/i2c/devices/.../output_hvled[n]
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the controlling backlight device for high-voltage current
sink HVLED[n] (n = 1, 2) (0, 1).
What: /sys/bus/i2c/devices/.../output_lvled[n]
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the controlling led device for low-voltage current sink
LVLED[n] (n = 1..5) (0..3).

48
Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 Normal file
View File

@ -0,0 +1,48 @@
What: /sys/class/backlight/<backlight>/als_channel
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the ALS output channel used as input in
ALS-current-control mode (0, 1), where
0 - out_current0 (backlight 0)
1 - out_current1 (backlight 1)
What: /sys/class/backlight/<backlight>/als_en
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Enable ALS-current-control mode (0, 1).
What: /sys/class/backlight/<backlight>/id
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the id of this backlight (0, 1).
What: /sys/class/backlight/<backlight>/linear
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the brightness-mapping mode (0, 1), where
0 - exponential mode
1 - linear mode
What: /sys/class/backlight/<backlight>/pwm
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the PWM-input control mask (5 bits), where
bit 5 - PWM-input enabled in Zone 4
bit 4 - PWM-input enabled in Zone 3
bit 3 - PWM-input enabled in Zone 2
bit 2 - PWM-input enabled in Zone 1
bit 1 - PWM-input enabled in Zone 0
bit 0 - PWM-input enabled

65
Documentation/ABI/testing/sysfs-class-led-driver-lm3533 Normal file
View File

@ -0,0 +1,65 @@
What: /sys/class/leds/<led>/als_channel
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the ALS output channel to use as input in
ALS-current-control mode (1, 2), where
1 - out_current1
2 - out_current2
What: /sys/class/leds/<led>/als_en
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Enable ALS-current-control mode (0, 1).
What: /sys/class/leds/<led>/falltime
What: /sys/class/leds/<led>/risetime
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the pattern generator fall and rise times (0..7), where
0 - 2048 us
1 - 262 ms
2 - 524 ms
3 - 1.049 s
4 - 2.097 s
5 - 4.194 s
6 - 8.389 s
7 - 16.78 s
What: /sys/class/leds/<led>/id
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the id of this led (0..3).
What: /sys/class/leds/<led>/linear
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the brightness-mapping mode (0, 1), where
0 - exponential mode
1 - linear mode
What: /sys/class/leds/<led>/pwm
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the PWM-input control mask (5 bits), where
bit 5 - PWM-input enabled in Zone 4
bit 4 - PWM-input enabled in Zone 3
bit 3 - PWM-input enabled in Zone 2
bit 2 - PWM-input enabled in Zone 1
bit 1 - PWM-input enabled in Zone 0
bit 0 - PWM-input enabled

3
Documentation/SubmittingPatches
View File

@ -150,7 +150,8 @@ be able to justify all violations that remain in your patch.
Look through the MAINTAINERS file and the source code, and determine
if your change applies to a specific subsystem of the kernel, with
an assigned maintainer. If so, e-mail that person.
an assigned maintainer. If so, e-mail that person. The script
scripts/get_maintainer.pl can be very useful at this step.
If no maintainer is listed, or the maintainer does not respond, send
your patch to the primary Linux kernel developer's mailing list,

32
Documentation/arm/SPEAr/overview.txt
View File

@ -8,9 +8,8 @@ Introduction
weblink : http://www.st.com/spear
The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
series is in progress.
supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
Hierarchy in SPEAr is as follows:
@ -26,33 +25,36 @@ Introduction
- SPEAr600 (SOC)
- SPEAr600 Evaluation Board
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- SPEAr1300 (SOC)
- SPEAr1310 (SOC)
- SPEAr1310 Evaluation Board
- SPEAr1340 (SOC)
- SPEAr1340 Evaluation Board
Configuration
-------------
A generic configuration is provided for each machine, and can be used as the
default by
make spear600_defconfig
make spear300_defconfig
make spear310_defconfig
make spear320_defconfig
make spear13xx_defconfig
make spear3xx_defconfig
make spear6xx_defconfig
Layout
------
The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
with headers in plat/.
Each machine series have a directory with name arch/arm/mach-spear followed by
series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
mach-spear* doesn't contains board specific files as they fully support
Flattened Device Tree.
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
spear600.c. mach-spear* doesn't contains board specific files as they fully
support Flattened Device Tree.
Document Author

37
Documentation/cgroups/memory.txt
View File

@ -184,12 +184,14 @@ behind this approach is that a cgroup that aggressively uses a shared
page will eventually get charged for it (once it is uncharged from
the cgroup that brought it in -- this will happen on memory pressure).
But see section 8.2: when moving a task to another cgroup, its pages may
be recharged to the new cgroup, if move_charge_at_immigrate has been chosen.
Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.
When you do swapoff and make swapped-out pages of shmem(tmpfs) to
be backed into memory in force, charges for pages are accounted against the
caller of swapoff rather than the users of shmem.
2.4 Swap Extension (CONFIG_CGROUP_MEM_RES_CTLR_SWAP)
Swap Extension allows you to record charge for swap. A swapped-in page is
@ -374,14 +376,15 @@ cgroup might have some charge associated with it, even though all
tasks have migrated away from it. (because we charge against pages, not
against tasks.)
Such charges are freed or moved to their parent. At moving, both of RSS
and CACHES are moved to parent.
rmdir() may return -EBUSY if freeing/moving fails. See 5.1 also.
We move the stats to root (if use_hierarchy==0) or parent (if
use_hierarchy==1), and no change on the charge except uncharging
from the child.
Charges recorded in swap information is not updated at removal of cgroup.
Recorded information is discarded and a cgroup which uses swap (swapcache)
will be charged as a new owner of it.
About use_hierarchy, see Section 6.
5. Misc. interfaces.
@ -394,13 +397,15 @@ will be charged as a new owner of it.
Almost all pages tracked by this memory cgroup will be unmapped and freed.
Some pages cannot be freed because they are locked or in-use. Such pages are
moved to parent and this cgroup will be empty. This may return -EBUSY if
VM is too busy to free/move all pages immediately.
moved to parent(if use_hierarchy==1) or root (if use_hierarchy==0) and this
cgroup will be empty.
Typical use case of this interface is that calling this before rmdir().
Because rmdir() moves all pages to parent, some out-of-use page caches can be
moved to the parent. If you want to avoid that, force_empty will be useful.
About use_hierarchy, see Section 6.
5.2 stat file
memory.stat file includes following statistics
@ -430,17 +435,10 @@ hierarchical_memory_limit - # of bytes of memory limit with regard to hierarchy
hierarchical_memsw_limit - # of bytes of memory+swap limit with regard to
hierarchy under which memory cgroup is.
total_cache - sum of all children's "cache"
total_rss - sum of all children's "rss"
total_mapped_file - sum of all children's "cache"
total_pgpgin - sum of all children's "pgpgin"
total_pgpgout - sum of all children's "pgpgout"
total_swap - sum of all children's "swap"
total_inactive_anon - sum of all children's "inactive_anon"
total_active_anon - sum of all children's "active_anon"
total_inactive_file - sum of all children's "inactive_file"
total_active_file - sum of all children's "active_file"
total_unevictable - sum of all children's "unevictable"
total_<counter> - # hierarchical version of <counter>, which in
addition to the cgroup's own value includes the
sum of all hierarchical children's values of
<counter>, i.e. total_cache
# The following additional stats are dependent on CONFIG_DEBUG_VM.
@ -622,8 +620,7 @@ memory cgroup.
bit | what type of charges would be moved ?
-----+------------------------------------------------------------------------
0 | A charge of an anonymous page(or swap of it) used by the target task.
| Those pages and swaps must be used only by the target task. You must
| enable Swap Extension(see 2.4) to enable move of swap charges.
| You must enable Swap Extension(see 2.4) to enable move of swap charges.
-----+------------------------------------------------------------------------
1 | A charge of file pages(normal file, tmpfs file(e.g. ipc shared memory)
| and swaps of tmpfs file) mmapped by the target task. Unlike the case of
@ -636,8 +633,6 @@ memory cgroup.
8.3 TODO
- Implement madvise(2) to let users decide the vma to be moved or not to be
moved.
- All of moving charge operations are done under cgroup_mutex. It's not good
behavior to hold the mutex too long, so we may need some trick.

8
Documentation/cgroups/resource_counter.txt
View File

@ -92,6 +92,14 @@ to work with it.
The _locked routines imply that the res_counter->lock is taken.
f. void res_counter_uncharge_until
(struct res_counter *rc, struct res_counter *top,
unsinged long val)
Almost same as res_cunter_uncharge() but propagation of uncharge
stops when rc == top. This is useful when kill a res_coutner in
child cgroup.
2.1 Other accounting routines
There are more routines that may help you with common needs, like

62
Documentation/cris/README
View File

@ -1,38 +1,34 @@
Linux 2.4 on the CRIS architecture
==================================
$Id: README,v 1.7 2001/04/19 12:38:32 bjornw Exp $
Linux on the CRIS architecture
==============================
This is a port of Linux 2.4 to Axis Communications ETRAX 100LX embedded
network CPU. For more information about CRIS and ETRAX please see further
below.
This is a port of Linux to Axis Communications ETRAX 100LX,
ETRAX FS and ARTPEC-3 embedded network CPUs.
For more information about CRIS and ETRAX please see further below.
In order to compile this you need a version of gcc with support for the
ETRAX chip family. Please see this link for more information on how to
ETRAX chip family. Please see this link for more information on how to
download the compiler and other tools useful when building and booting
software for the ETRAX platform:
http://developer.axis.com/doc/software/devboard_lx/install-howto.html
<more specific information should come in this document later>
http://developer.axis.com/wiki/doku.php?id=axis:install-howto-2_20
What is CRIS ?
--------------
CRIS is an acronym for 'Code Reduced Instruction Set'. It is the CPU
architecture in Axis Communication AB's range of embedded network CPU's,
called ETRAX. The latest CPU is called ETRAX 100LX, where LX stands for
'Linux' because the chip was designed to be a good host for the Linux
operating system.
called ETRAX.
The ETRAX 100LX chip
--------------------
For reference, please see the press-release:
For reference, please see the following link:
http://www.axis.com/news/us/001101_etrax.htm
http://www.axis.com/products/dev_etrax_100lx/index.htm
The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad
range of built-in interfaces, all with modern scatter/gather DMA.
The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad
range of built-in interfaces, all with modern scatter/gather DMA.
Memory interfaces:
@ -51,20 +47,28 @@ I/O interfaces:
* SCSI
* two parallel-ports
* two generic 8-bit ports
(not all interfaces are available at the same time due to chip pin
(not all interfaces are available at the same time due to chip pin
multiplexing)
The previous version of the ETRAX, the ETRAX 100, sits in almost all of
Axis shipping thin-servers like the Axis 2100 web camera or the ETRAX 100
developer-board. It lacks an MMU so the Linux we run on that is a version
of uClinux (Linux 2.0 without MM-support) ported to the CRIS architecture.
The new Linux 2.4 port has full MM and needs a CPU with an MMU, so it will
not run on the ETRAX 100.
ETRAX 100LX is CRISv10 architecture.
A version of the Axis developer-board with ETRAX 100LX (running Linux
2.4) is now available. For more information please see developer.axis.com.
The ETRAX FS and ARTPEC-3 chips
-------------------------------
The ETRAX FS is a 200MHz 32-bit RISC processor with on-chip 16kB
I-cache and 16kB D-cache and with a wide range of device interfaces
including multiple high speed serial ports and an integrated USB 1.1 PHY.
The ARTPEC-3 is a variant of the ETRAX FS with additional IO-units
used by the Axis Communications network cameras.
See below link for more information:
http://www.axis.com/products/dev_etrax_fs/index.htm
ETRAX FS and ARTPEC-3 are both CRISv32 architectures.
Bootlog
-------
@ -182,10 +186,6 @@ SwapFree: 0 kB
-rwxr-xr-x 1 342 100 16252 Jan 01 00:00 telnetd
(All programs are statically linked to the libc at this point - we have not ported the
shared libraries yet)

12
Documentation/devicetree/bindings/arm/fsl.txt
View File

@ -1,6 +1,14 @@
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
i.MX23 Evaluation Kit
Required root node properties:
- compatible = "fsl,imx23-evk", "fsl,imx23";
i.MX28 Evaluation Kit
Required root node properties:
- compatible = "fsl,imx28-evk", "fsl,imx28";
i.MX51 Babbage Board
Required root node properties:
- compatible = "fsl,imx51-babbage", "fsl,imx51";
@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
i.MX6 Quad SABRE Smart Device Board
Required root node properties:
- compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
Generic i.MX boards
-------------------

52
Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt Normal file
View File

@ -0,0 +1,52 @@
* Samsung Exynos Interrupt Combiner Controller
Samsung's Exynos4 architecture includes a interrupt combiner controller which
can combine interrupt sources as a group and provide a single interrupt request
for the group. The interrupt request from each group are connected to a parent
interrupt controller, such as GIC in case of Exynos4210.
The interrupt combiner controller consists of multiple combiners. Upto eight
interrupt sources can be connected to a combiner. The combiner outputs one
combined interrupt for its eight interrupt sources. The combined interrupt
is usually connected to a parent interrupt controller.
A single node in the device tree is used to describe the interrupt combiner
controller module (which includes multiple combiners). A combiner in the
interrupt controller module shares config/control registers with other
combiners. For example, a 32-bit interrupt enable/disable config register
can accommodate upto 4 interrupt combiners (with each combiner supporting
upto 8 interrupt sources).
Required properties:
- compatible: should be "samsung,exynos4210-combiner".
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: should be <2>. The meaning of the cells are
* First Cell: Combiner Group Number.
* Second Cell: Interrupt number within the group.
- reg: Base address and size of interrupt combiner registers.
- interrupts: The list of interrupts generated by the combiners which are then
connected to a parent interrupt controller. The format of the interrupt
specifier depends in the interrupt parent controller.
Optional properties:
- samsung,combiner-nr: The number of interrupt combiners supported. If this
property is not specified, the default number of combiners is assumed
to be 16.
- interrupt-parent: pHandle of the parent interrupt controller, if not
inherited from the parent node.
Example:
The following is a an example from the Exynos4210 SoC dtsi file.
combiner:interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x10440000 0x1000>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};

18
Documentation/devicetree/bindings/arm/spear-timer.txt Normal file
View File

@ -0,0 +1,18 @@
* SPEAr ARM Timer
** Timer node required properties:
- compatible : Should be:
"st,spear-timer"
- reg: Address range of the timer registers
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupt: Should contain the timer interrupt number
Example:
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
interrupts = <2>;
};

16
Documentation/devicetree/bindings/arm/spear.txt
View File

@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings
---------------------------------------
Boards with the ST SPEAr600 SoC shall have the following properties:
Required root node property:
compatible = "st,spear600";
Boards with the ST SPEAr300 SoC shall have the following properties:
Required root node property:
compatible = "st,spear300";
Boards with the ST SPEAr310 SoC shall have the following properties:
Required root node property:
compatible = "st,spear310";
Boards with the ST SPEAr320 SoC shall have the following properties:
Required root node property:
compatible = "st,spear320";
Boards with the ST SPEAr1310 SoC shall have the following properties:
Required root node property:
compatible = "st,spear1310";
Boards with the ST SPEAr1340 SoC shall have the following properties:
Required root node property:
compatible = "st,spear1340";

11
Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt Normal file
View File

@ -0,0 +1,11 @@
NVIDIA Tegra AHB
Required properties:
- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb"
- reg : Should contain 1 register ranges(address and length)
Example:
ahb: ahb@6000c004 {
compatible = "nvidia,tegra20-ahb";
reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
};

19
Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt Normal file
View File

@ -0,0 +1,19 @@
* Freescale MXS DMA
Required properties:
- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
- reg : Should contain registers location and length
Supported chips:
imx23, imx28.
Examples:
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
reg = <0x80004000 2000>;
};
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
reg = <0x80024000 2000>;
};

17
Documentation/devicetree/bindings/dma/snps-dma.txt Normal file
View File

@ -0,0 +1,17 @@
* Synopsys Designware DMA Controller
Required properties:
- compatible: "snps,dma-spear1340"
- reg: Address range of the DMAC registers
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupt: Should contain the DMAC interrupt number
Example:
dma@fc000000 {
compatible = "snps,dma-spear1340";
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
};

38
Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt Normal file
View File

@ -0,0 +1,38 @@
Lantiq SoC External Bus memory mapped GPIO controller
By attaching hardware latches to the EBU it is possible to create output
only gpios. This driver configures a special memory address, which when
written to outputs 16 bit to the latches.
The node describing the memory mapped GPIOs needs to be a child of the node
describing the "lantiq,localbus".
Required properties:
- compatible : Should be "lantiq,gpio-mm-lantiq"
- reg : Address and length of the register set for the device
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
- gpio-controller : Marks the device node as a gpio controller.
Optional properties:
- lantiq,shadow : The default value that we shall assume as already set on the
shift register cascade.
Example:
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
gpio_mm0: gpio@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10>;
gpio-controller;
#gpio-cells = <2>;
lantiq,shadow = <0x77f>
};
}

87
Documentation/devicetree/bindings/gpio/gpio-mxs.txt Normal file
View File

@ -0,0 +1,87 @@
* Freescale MXS GPIO controller
The Freescale MXS GPIO controller is part of MXS PIN controller. The
GPIOs are organized in port/bank. Each port consists of 32 GPIOs.
As the GPIO controller is embedded in the PIN controller and all the
GPIO ports share the same IO space with PIN controller, the GPIO node
will be represented as sub-nodes of MXS pinctrl node.
Required properties for GPIO node:
- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include
imx23 and imx28.
- interrupts : Should be the port interrupt shared by all 32 pins.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:
1 = low-to-high edge triggered.
2 = high-to-low edge triggered.
4 = active high level-sensitive.
8 = active low level-sensitive.
Note: Each GPIO port should have an alias correctly numbered in "aliases"
node.
Examples:
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
};
pinctrl@80018000 {
compatible = "fsl,imx28-pinctrl", "simple-bus";
reg = <0x80018000 2000>;
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio";
interrupts = <127>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@1 {
compatible = "fsl,imx28-gpio";
interrupts = <126>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@2 {
compatible = "fsl,imx28-gpio";
interrupts = <125>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@3 {
compatible = "fsl,imx28-gpio";
interrupts = <124>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@4 {
compatible = "fsl,imx28-gpio";
interrupts = <123>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

42
Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt Normal file
View File

@ -0,0 +1,42 @@
Lantiq SoC Serial To Parallel (STP) GPIO controller
The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
peripheral controller used to drive external shift register cascades. At most
3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
to drive the 2 LSBs of the cascade automatically.
Required properties:
- compatible : Should be "lantiq,gpio-stp-xway"
- reg : Address and length of the register set for the device
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
- gpio-controller : Marks the device node as a gpio controller.
Optional properties:
- lantiq,shadow : The default value that we shall assume as already set on the
shift register cascade.
- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled
in the shift register cascade.
- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
property can enable this feature.
- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade.
- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade.
- lantiq,rising : use rising instead of falling edge for the shift register
Example:
gpio1: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffff>;
lantiq,groups = <0x7>;
lantiq,dsl = <0x3>;
lantiq,phy1 = <0x7>;
lantiq,phy2 = <0x7>;
/* lantiq,rising; */
};

16
Documentation/devicetree/bindings/i2c/i2c-mxs.txt Normal file
View File

@ -0,0 +1,16 @@
* Freescale MXS Inter IC (I2C) Controller
Required properties:
- compatible: Should be "fsl,<chip>-i2c"
- reg: Should contain registers location and length
- interrupts: Should contain ERROR and DMA interrupts
Examples:
i2c0: i2c@80058000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
interrupts = <111 68>;
};

60
Documentation/devicetree/bindings/i2c/mux.txt Normal file
View File

@ -0,0 +1,60 @@
Common i2c bus multiplexer/switch properties.
An i2c bus multiplexer/switch will have several child busses that are
numbered uniquely in a device dependent manner. The nodes for an i2c bus
multiplexer/switch will have one child node for each child
bus.
Required properties:
- #address-cells = <1>;
- #size-cells = <0>;
Required properties for child nodes:
- #address-cells = <1>;
- #size-cells = <0>;
- reg : The sub-bus number.
Optional properties for child nodes:
- Other properties specific to the multiplexer/switch hardware.
- Child nodes conforming to i2c bus binding
Example :
/*
An NXP pca9548 8 channel I2C multiplexer at address 0x70
with two NXP pca8574 GPIO expanders attached, one each to
ports 3 and 4.
*/
mux@70 {
compatible = "nxp,pca9548";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
gpio1: gpio@38 {
compatible = "nxp,pca8574";
reg = <0x38>;
#gpio-cells = <2>;
gpio-controller;
};
};
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
gpio2: gpio@38 {
compatible = "nxp,pca8574";
reg = <0x38>;
#gpio-cells = <2>;
gpio-controller;
};
};
};

8
Documentation/devicetree/bindings/i2c/samsung-i2c.txt
View File

@ -6,14 +6,18 @@ Required properties:
- compatible: value should be either of the following.
(a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
(b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
(c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
inside HDMIPHY block found on several samsung SoCs
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
- gpios: The order of the gpios should be the following: <SDA, SCL>.
The gpio specifier depends on the gpio controller.
Optional properties:
- gpios: The order of the gpios should be the following: <SDA, SCL>.
The gpio specifier depends on the gpio controller. Required in all
cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
lines are permanently wired to the respective client
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not

22
Documentation/devicetree/bindings/i2c/xiic.txt Normal file
View File

@ -0,0 +1,22 @@
Xilinx IIC controller:
Required properties:
- compatible : Must be "xlnx,xps-iic-2.00.a"
- reg : IIC register location and length
- interrupts : IIC controller unterrupt
- #address-cells = <1>
- #size-cells = <0>
Optional properties:
- Child nodes conforming to i2c bus binding
Example:
axi_iic_0: i2c@40800000 {
compatible = "xlnx,xps-iic-2.00.a";
interrupts = < 1 2 >;
reg = < 0x40800000 0x10000 >;
#size-cells = <0>;
#address-cells = <1>;
};

60
Documentation/devicetree/bindings/mfd/da9052-i2c.txt Normal file
View File

@ -0,0 +1,60 @@
* Dialog DA9052/53 Power Management Integrated Circuit (PMIC)
Required properties:
- compatible : Should be "dlg,da9052", "dlg,da9053-aa",
"dlg,da9053-ab", or "dlg,da9053-bb"
Sub-nodes:
- regulators : Contain the regulator nodes. The DA9052/53 regulators are
bound using their names as listed below:
buck0 : regulator BUCK0
buck1 : regulator BUCK1
buck2 : regulator BUCK2
buck3 : regulator BUCK3
ldo4 : regulator LDO4
ldo5 : regulator LDO5
ldo6 : regulator LDO6
ldo7 : regulator LDO7
ldo8 : regulator LDO8
ldo9 : regulator LDO9
ldo10 : regulator LDO10
ldo11 : regulator LDO11
ldo12 : regulator LDO12
ldo13 : regulator LDO13
The bindings details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
Examples:
i2c@63fc8000 { /* I2C1 */
status = "okay";
pmic: dialog@48 {
compatible = "dlg,da9053-aa";
reg = <0x48>;
regulators {
buck0 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
};
buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
};
buck2 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
};
buck3 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
};
};
};
};

133
Documentation/devicetree/bindings/mfd/tps65910.txt Normal file
View File

@ -0,0 +1,133 @@
TPS65910 Power Management Integrated Circuit
Required properties:
- compatible: "ti,tps65910" or "ti,tps65911"
- reg: I2C slave address
- interrupts: the interrupt outputs of the controller
- #gpio-cells: number of cells to describe a GPIO, this should be 2.
The first cell is the GPIO number.
The second cell is used to specify additional options <unused>.
- gpio-controller: mark the device as a GPIO controller
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
Documentation/devicetree/bindings/interrupts.txt
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Not all regulators for the given
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are:
tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
vaux2, vaux33, vmmc
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
ldo6, ldo7, ldo8
Optional properties:
- ti,vmbch-threshold: (tps65911) main battery charged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,en-gpio-sleep: enable sleep control for gpios
There should be 9 entries here, one for each gpio.
Regulator Optional properties:
- ti,regulator-ext-sleep-control: enable external sleep
control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
If this property is not defined, it defaults to 0 (not enabled).
Example:
pmu: tps65910@d2 {
compatible = "ti,tps65910";
reg = <0xd2>;
interrupt-parent = <&intc>;
interrupts = < 0 118 0x04 >;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
ti,vmbch-threshold = 0;
ti,vmbch2-threshold = 0;
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
regulators {
vdd1_reg: vdd1 {
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
vdd2_reg: vdd2 {
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <4>;
};
vddctrl_reg: vddctrl {
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
vio_reg: vio {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
ldo1_reg: ldo1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo2_reg: ldo2 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo4_reg: ldo4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
ti,regulator-ext-sleep-control = <0>;
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo6_reg: ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo7_reg: ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
ldo8_reg: ldo8 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
ti,regulator-ext-sleep-control = <1>;
};
};
};

62
Documentation/devicetree/bindings/mfd/twl6040.txt Normal file
View File

@ -0,0 +1,62 @@
Texas Instruments TWL6040 family
The TWL6040s are 8-channel high quality low-power audio codecs providing audio
and vibra functionality on OMAP4+ platforms.
They are connected ot the host processor via i2c for commands, McPDM for audio
data and commands.
Required properties:
- compatible : Must be "ti,twl6040";
- reg: must be 0x4b for i2c address
- interrupts: twl6040 has one interrupt line connecteded to the main SoC
- interrupt-parent: The parent interrupt controller
- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
- vio-supply: Regulator for the twl6040 VIO supply
- v2v1-supply: Regulator for the twl6040 V2V1 supply
Optional properties, nodes:
- enable-active-high: To power on the twl6040 during boot.
Vibra functionality
Required properties:
- vddvibl-supply: Regulator for the left vibra motor
- vddvibr-supply: Regulator for the right vibra motor
- vibra { }: Configuration section for vibra parameters containing the following
properties:
- ti,vibldrv-res: Resistance parameter for left driver
- ti,vibrdrv-res: Resistance parameter for right driver
- ti,viblmotor-res: Resistance parameter for left motor
- ti,viblmotor-res: Resistance parameter for right motor
Optional properties within vibra { } section:
- vddvibl_uV: If the vddvibl default voltage need to be changed
- vddvibr_uV: If the vddvibr default voltage need to be changed
Example:
&i2c1 {
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
interrupts = <0 119 4>;
interrupt-parent = <&gic>;
twl6040,audpwron-gpio = <&gpio4 31 0>;
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
/* regulators for vibra motor */
vddvibl-supply = <&vbat>;
vddvibr-supply = <&vbat>;
vibra {
/* Vibra driver, motor resistance parameters */
ti,vibldrv-res = <8>;
ti,vibrdrv-res = <3>;
ti,viblmotor-res = <10>;
ti,vibrmotor-res = <10>;
};
};
};

6
Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
View File

@ -11,9 +11,11 @@ Required properties:
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
- sdhci,wp-inverted : (optional) specifies that eSDHC controller
reports inverted write-protect state;
reports inverted write-protect state; New devices should use
the generic "wp-inverted" property.
- sdhci,1-bit-only : (optional) specifies that a controller can
only handle 1-bit data transfers.
only handle 1-bit data transfers. New devices should use the
generic "bus-width = <1>" property.
- sdhci,auto-cmd12: (optional) specifies that a controller can
only handle auto CMD12.

2
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
View File

@ -9,7 +9,7 @@ Required properties:
- interrupts : Should contain eSDHC interrupt
Optional properties:
- fsl,card-wired : Indicate the card is wired to host permanently
- non-removable : Indicate the card is wired to host permanently
- fsl,cd-internal : Indicate to use controller internal card detection
- fsl,wp-internal : Indicate to use controller internal write protection
- cd-gpios : Specify GPIOs for card detection

3
Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
View File

@ -10,7 +10,8 @@ Required properties:
Optional properties:
- gpios : may specify GPIOs in this order: Card-Detect GPIO,
Write-Protect GPIO.
Write-Protect GPIO. Note that this does not follow the
binding from mmc.txt, for historic reasons.
- interrupts : the interrupt of a card detect interrupt.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.

27
Documentation/devicetree/bindings/mmc/mmc.txt Normal file
View File

@ -0,0 +1,27 @@
These properties are common to multiple MMC host controllers. Any host
that requires the respective functionality should implement them using
these definitions.
Required properties:
- bus-width: Number of data lines, can be <1>, <4>, or <8>
Optional properties:
- cd-gpios : Specify GPIOs for card detection, see gpio binding
- wp-gpios : Specify GPIOs for write protection, see gpio binding
- cd-inverted: when present, polarity on the wp gpio line is inverted
- wp-inverted: when present, polarity on the wp gpio line is inverted
- non-removable: non-removable slot (like eMMC)
- max-frequency: maximum operating clock frequency
Example:
sdhci@ab000000 {
compatible = "sdhci";
reg = <0xab000000 0x200>;
interrupts = <23>;
bus-width = <4>;
cd-gpios = <&gpio 69 0>;
cd-inverted;
wp-gpios = <&gpio 70 0>;
max-frequency = <50000000>;
}

19
Documentation/devicetree/bindings/mmc/mmci.txt Normal file
View File

@ -0,0 +1,19 @@
* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
The ARM PrimeCell MMCI PL180 and PL181 provides and interface for
reading and writing to MultiMedia and SD cards alike.
Required properties:
- compatible : contains "arm,pl18x", "arm,primecell".
- reg : contains pl18x registers and length.
- interrupts : contains the device IRQ(s).
- arm,primecell-periphid : contains the PrimeCell Peripheral ID.
Optional properties:
- wp-gpios : contains any write protect (ro) gpios
- cd-gpios : contains any card detection gpios
- cd-inverted : indicates whether the cd gpio is inverted
- max-frequency : contains the maximum operating frequency
- bus-width : number of data lines, can be <1>, <4>, or <8>
- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable
- mmc-cap-sd-highspeed : indicates whether SD is high speed capable

25
Documentation/devicetree/bindings/mmc/mxs-mmc.txt Normal file
View File

@ -0,0 +1,25 @@
* Freescale MXS MMC controller
The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
to support MMC, SD, and SDIO types of memory cards.
Required properties:
- compatible: Should be "fsl,<chip>-mmc". The supported chips include
imx23 and imx28.
- reg: Should contain registers location and length
- interrupts: Should contain ERROR and DMA interrupts
- fsl,ssp-dma-channel: APBH DMA channel for the SSP
- bus-width: Number of data lines, can be <1>, <4>, or <8>
Optional properties:
- wp-gpios: Specify GPIOs for write protection
Examples:
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
reg = <0x80010000 2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
bus-width = <8>;
};

4
Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
View File

@ -7,12 +7,12 @@ Required properties:
- compatible : Should be "nvidia,<chip>-sdhci"
- reg : Should contain SD/MMC registers location and length
- interrupts : Should contain SD/MMC interrupt
- bus-width : Number of data lines, can be <1>, <4>, or <8>
Optional properties:
- cd-gpios : Specify GPIOs for card detection
- wp-gpios : Specify GPIOs for write protection
- power-gpios : Specify GPIOs for power control
- support-8bit : Boolean, indicates if 8-bit mode should be used.
Example:
@ -23,5 +23,5 @@ sdhci@c8000200 {
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
support-8bit;
bus-width = <8>;
};

4
Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
View File

@ -15,7 +15,7 @@ Optional properties:
ti,dual-volt: boolean, supports dual voltage cards
<supply-name>-supply: phandle to the regulator device tree node
"supply-name" examples are "vmmc", "vmmc_aux" etc
ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
bus-width: Number of data lines, default assumed is 1 if the property is missing.
cd-gpios: GPIOs for card detection
wp-gpios: GPIOs for write protection
ti,non-removable: non-removable slot (like eMMC)
@ -27,7 +27,7 @@ Example:
reg = <0x4809c000 0x400>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,bus-width = <4>;
bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
ti,non-removable;
};

2
Documentation/devicetree/bindings/net/fsl-fec.txt
View File

@ -14,7 +14,7 @@ Optional properties:
Example:
fec@83fec000 {
ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;

47
Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
View File

@ -4,6 +4,8 @@ Required properties:
- compatible : "st,spear300-pinmux"
: "st,spear310-pinmux"
: "st,spear320-pinmux"
: "st,spear1310-pinmux"
: "st,spear1340-pinmux"
- reg : Address range of the pinctrl registers
- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
- Its values for SPEAr300:
@ -89,6 +91,37 @@ For SPEAr320 machines:
"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
For SPEAr1310 machines:
"i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
"i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
"smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
"smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
"nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
"keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
"gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
"sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
"uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
"uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
"i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
"i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
"i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
"can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
"pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
"ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
For SPEAr1340 machines:
"pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
"keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
"spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
"pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
"vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
"cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
"ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
"uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
"rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
"sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
"miphy_dbg_grp", "pcie_grp", "sata_grp"
Valid values for function names are:
For All SPEAr3xx machines:
"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
@ -106,3 +139,17 @@ For SPEAr320 machines:
"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
"mii0_1", "i2c1", "i2c2"
For SPEAr1310 machines:
"i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
"rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
"gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
"uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
"i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
For SPEAr1340 machines:
"pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
"pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
"uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
"xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"

15
Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt Normal file
View File

@ -0,0 +1,15 @@
* NXP LPC32xx SoC Real Time Clock controller
Required properties:
- compatible: must be "nxp,lpc3220-rtc"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: The RTC interrupt
Example:
rtc@40024000 {
compatible = "nxp,lpc3220-rtc";
reg = <0x40024000 0x1000>;
interrupts = <52 0>;
};

17
Documentation/devicetree/bindings/rtc/spear-rtc.txt Normal file
View File

@ -0,0 +1,17 @@
* SPEAr RTC
Required properties:
- compatible : "st,spear600-rtc"
- reg : Address range of the rtc registers
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupt: Should contain the rtc interrupt number
Example:
rtc@fc000000 {
compatible = "st,spear600-rtc";
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
};

21
Documentation/devicetree/bindings/sound/omap-dmic.txt Normal file
View File

@ -0,0 +1,21 @@
* Texas Instruments OMAP4+ Digital Microphone Module
Required properties:
- compatible: "ti,omap4-dmic"
- reg: Register location and size as an array:
<MPU access base address, size>,
<L3 interconnect address, size>;
- interrupts: Interrupt number for DMIC
- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated with OMAP dmic IP
Example:
dmic: dmic@4012e000 {
compatible = "ti,omap4-dmic";
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
interrupts = <0 114 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};

21
Documentation/devicetree/bindings/sound/omap-mcpdm.txt Normal file
View File

@ -0,0 +1,21 @@
* Texas Instruments OMAP4+ McPDM
Required properties:
- compatible: "ti,omap4-mcpdm"
- reg: Register location and size as an array:
<MPU access base address, size>,
<L3 interconnect address, size>;
- interrupts: Interrupt number for McPDM
- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated to the McPDM
Example:
mcpdm: mcpdm@40132000 {
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
interrupts = <0 112 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};

2
Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
View File

@ -11,7 +11,7 @@ Optional properties:
Example:
uart@73fbc000 {
serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;

3
Documentation/devicetree/bindings/usb/tegra-usb.txt
View File

@ -12,6 +12,9 @@ Required properties :
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
activated for the bus to be powered.
Required properties for phy_type == ulpi:
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
Optional properties:
- dr_mode : dual role mode. Indicates the working mode for
nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral",

109
Documentation/dma-buf-sharing.txt
View File

@ -29,13 +29,6 @@ The buffer-user
in memory, mapped into its own address space, so it can access the same area
of memory.
*IMPORTANT*: [see https://lkml.org/lkml/2011/12/20/211 for more details]
For this first version, A buffer shared using the dma_buf sharing API:
- *may* be exported to user space using "mmap" *ONLY* by exporter, outside of
this framework.
- with this new iteration of the dma-buf api cpu access from the kernel has been
enable, see below for the details.
dma-buf operations for device dma only
--------------------------------------
@ -300,6 +293,17 @@ Access to a dma_buf from the kernel context involves three steps:
Note that these calls need to always succeed. The exporter needs to complete
any preparations that might fail in begin_cpu_access.
For some cases the overhead of kmap can be too high, a vmap interface
is introduced. This interface should be used very carefully, as vmalloc
space is a limited resources on many architectures.
Interfaces:
void *dma_buf_vmap(struct dma_buf *dmabuf)
void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
The vmap call can fail if there is no vmap support in the exporter, or if it
runs out of vmalloc space. Fallback to kmap should be implemented.
3. Finish access
When the importer is done accessing the range specified in begin_cpu_access,
@ -313,6 +317,83 @@ Access to a dma_buf from the kernel context involves three steps:
enum dma_data_direction dir);
Direct Userspace Access/mmap Support
------------------------------------
Being able to mmap an export dma-buf buffer object has 2 main use-cases:
- CPU fallback processing in a pipeline and
- supporting existing mmap interfaces in importers.
1. CPU fallback processing in a pipeline
In many processing pipelines it is sometimes required that the cpu can access
the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid
the need to handle this specially in userspace frameworks for buffer sharing
it's ideal if the dma_buf fd itself can be used to access the backing storage
from userspace using mmap.
Furthermore Android's ION framework already supports this (and is otherwise
rather similar to dma-buf from a userspace consumer side with using fds as
handles, too). So it's beneficial to support this in a similar fashion on
dma-buf to have a good transition path for existing Android userspace.
No special interfaces, userspace simply calls mmap on the dma-buf fd.
2. Supporting existing mmap interfaces in exporters
Similar to the motivation for kernel cpu access it is again important that
the userspace code of a given importing subsystem can use the same interfaces
with a imported dma-buf buffer object as with a native buffer object. This is
especially important for drm where the userspace part of contemporary OpenGL,
X, and other drivers is huge, and reworking them to use a different way to
mmap a buffer rather invasive.
The assumption in the current dma-buf interfaces is that redirecting the
initial mmap is all that's needed. A survey of some of the existing
subsystems shows that no driver seems to do any nefarious thing like syncing
up with outstanding asynchronous processing on the device or allocating
special resources at fault time. So hopefully this is good enough, since
adding interfaces to intercept pagefaults and allow pte shootdowns would
increase the complexity quite a bit.
Interface:
int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
unsigned long);
If the importing subsystem simply provides a special-purpose mmap call to set
up a mapping in userspace, calling do_mmap with dma_buf->file will equally
achieve that for a dma-buf object.
3. Implementation notes for exporters
Because dma-buf buffers have invariant size over their lifetime, the dma-buf
core checks whether a vma is too large and rejects such mappings. The
exporter hence does not need to duplicate this check.
Because existing importing subsystems might presume coherent mappings for
userspace, the exporter needs to set up a coherent mapping. If that's not
possible, it needs to fake coherency by manually shooting down ptes when
leaving the cpu domain and flushing caches at fault time. Note that all the
dma_buf files share the same anon inode, hence the exporter needs to replace
the dma_buf file stored in vma->vm_file with it's own if pte shootdown is
requred. This is because the kernel uses the underlying inode's address_space
for vma tracking (and hence pte tracking at shootdown time with
unmap_mapping_range).
If the above shootdown dance turns out to be too expensive in certain
scenarios, we can extend dma-buf with a more explicit cache tracking scheme
for userspace mappings. But the current assumption is that using mmap is
always a slower path, so some inefficiencies should be acceptable.
Exporters that shoot down mappings (for any reasons) shall not do any
synchronization at fault time with outstanding device operations.
Synchronization is an orthogonal issue to sharing the backing storage of a
buffer and hence should not be handled by dma-buf itself. This is explictly
mentioned here because many people seem to want something like this, but if
different exporters handle this differently, buffer sharing can fail in
interesting ways depending upong the exporter (if userspace starts depending
upon this implicit synchronization).
Miscellaneous notes
-------------------
@ -336,6 +417,20 @@ Miscellaneous notes
the exporting driver to create a dmabuf fd must provide a way to let
userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd().
- If an exporter needs to manually flush caches and hence needs to fake
coherency for mmap support, it needs to be able to zap all the ptes pointing
at the backing storage. Now linux mm needs a struct address_space associated
with the struct file stored in vma->vm_file to do that with the function
unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd
with the anon_file struct file, i.e. all dma_bufs share the same file.
Hence exporters need to setup their own file (and address_space) association
by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap
callback. In the specific case of a gem driver the exporter could use the
shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then
zap ptes by unmapping the corresponding range of the struct address_space
associated with their own file.
References:
[1] struct dma_buf_ops in include/linux/dma-buf.h
[2] All interfaces mentioned above defined in include/linux/dma-buf.h

18
Documentation/feature-removal-schedule.txt
View File

@ -588,3 +588,21 @@ Why: Remount currently allows changing bound subsystems and
replaced with conventional fsnotify.
----------------------------
What: KVM debugfs statistics
When: 2013
Why: KVM tracepoints provide mostly equivalent information in a much more
flexible fashion.
----------------------------
What: at91-mci driver ("CONFIG_MMC_AT91")
When: 3.7
Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support
was added to atmel-mci as a first step to support more chips.
Then at91-mci was kept only for old IP versions (on at91rm9200 and
at91sam9261). The support of these IP versions has just been added
to atmel-mci, so atmel-mci can be used for all chips.
Who: Ludovic Desroches <ludovic.desroches@atmel.com>
----------------------------

2
Documentation/filesystems/Locking
View File

@ -60,7 +60,6 @@ ata *);
ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*removexattr) (struct dentry *, const char *);
void (*truncate_range)(struct inode *, loff_t, loff_t);
int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);
locking rules:
@ -87,7 +86,6 @@ setxattr: yes
getxattr: no
listxattr: no
removexattr: yes
truncate_range: yes
fiemap: no
Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
victim.

6
Documentation/filesystems/ext3.txt
View File

@ -59,9 +59,9 @@ commit=nrsec (*) Ext3 can be told to sync all its data and metadata
Setting it to very large values will improve
performance.
barrier=<0(*)|1> This enables/disables the use of write barriers in
barrier the jbd code. barrier=0 disables, barrier=1 enables.
nobarrier (*) This also requires an IO stack which can support
barrier=<0|1(*)> This enables/disables the use of write barriers in
barrier (*) the jbd code. barrier=0 disables, barrier=1 enables.
nobarrier This also requires an IO stack which can support
barriers, and if jbd gets an error on a barrier
write, it will disable again with a warning.
Write barriers enforce proper on-disk ordering

16
Documentation/filesystems/porting
View File

@ -297,7 +297,8 @@ in the beginning of ->setattr unconditionally.
be used instead. It gets called whenever the inode is evicted, whether it has
remaining links or not. Caller does *not* evict the pagecache or inode-associated
metadata buffers; getting rid of those is responsibility of method, as it had
been for ->delete_inode().
been for ->delete_inode(). Caller makes sure async writeback cannot be running
for the inode while (or after) ->evict_inode() is called.
->drop_inode() returns int now; it's called on final iput() with
inode->i_lock held and it returns true if filesystems wants the inode to be
@ -306,14 +307,11 @@ updated appropriately. generic_delete_inode() is also alive and it consists
simply of return 1. Note that all actual eviction work is done by caller after
->drop_inode() returns.
clear_inode() is gone; use end_writeback() instead. As before, it must
be called exactly once on each call of ->evict_inode() (as it used to be for
each call of ->delete_inode()). Unlike before, if you are using inode-associated
metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to
call invalidate_inode_buffers() before end_writeback().
No async writeback (and thus no calls of ->write_inode()) will happen
after end_writeback() returns, so actions that should not overlap with ->write_inode()
(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call.
As before, clear_inode() must be called exactly once on each call of
->evict_inode() (as it used to be for each call of ->delete_inode()). Unlike
before, if you are using inode-associated metadata buffers (i.e.
mark_buffer_dirty_inode()), it's your responsibility to call
invalidate_inode_buffers() before clear_inode().
NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out
if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput()

2
Documentation/filesystems/proc.txt
View File

@ -743,6 +743,7 @@ Committed_AS: 100056 kB
VmallocTotal: 112216 kB
VmallocUsed: 428 kB
VmallocChunk: 111088 kB
AnonHugePages: 49152 kB
MemTotal: Total usable ram (i.e. physical ram minus a few reserved
bits and the kernel binary code)
@ -776,6 +777,7 @@ VmallocChunk: 111088 kB
Dirty: Memory which is waiting to get written back to the disk
Writeback: Memory which is actively being written back to the disk
AnonPages: Non-file backed pages mapped into userspace page tables
AnonHugePages: Non-file backed huge pages mapped into userspace page tables
Mapped: files which have been mmaped, such as libraries
Slab: in-kernel data structures cache
SReclaimable: Part of Slab, that might be reclaimed, such as caches

13
Documentation/filesystems/vfs.txt
View File

@ -363,7 +363,6 @@ struct inode_operations {
ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*removexattr) (struct dentry *, const char *);
void (*truncate_range)(struct inode *, loff_t, loff_t);
};
Again, all methods are called without any locks being held, unless
@ -472,9 +471,6 @@ otherwise noted.
removexattr: called by the VFS to remove an extended attribute from
a file. This method is called by removexattr(2) system call.
truncate_range: a method provided by the underlying filesystem to truncate a
range of blocks , i.e. punch a hole somewhere in a file.
The Address Space Object
========================
@ -760,7 +756,7 @@ struct file_operations
----------------------
This describes how the VFS can manipulate an open file. As of kernel
2.6.22, the following members are defined:
3.5, the following members are defined:
struct file_operations {
struct module *owner;
@ -790,6 +786,8 @@ struct file_operations {
int (*flock) (struct file *, int, struct file_lock *);
ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int);
ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int);
int (*setlease)(struct file *, long arg, struct file_lock **);
long (*fallocate)(struct file *, int mode, loff_t offset, loff_t len);
};
Again, all methods are called without any locks being held, unless
@ -858,6 +856,11 @@ otherwise noted.
splice_read: called by the VFS to splice data from file to a pipe. This
method is used by the splice(2) system call
setlease: called by the VFS to set or release a file lock lease.
setlease has the file_lock_lock held and must not sleep.
fallocate: called by the VFS to preallocate blocks or punch a hole.
Note that the file operations are implemented by the specific
filesystem in which the inode resides. When opening a device node
(character or block special) most filesystems will call special

12
Documentation/i2c/muxes/gpio-i2cmux → Documentation/i2c/muxes/i2c-mux-gpio
View File

@ -1,11 +1,11 @@
Kernel driver gpio-i2cmux
Kernel driver i2c-gpio-mux
Author: Peter Korsgaard <peter.korsgaard@barco.com>
Description
-----------
gpio-i2cmux is an i2c mux driver providing access to I2C bus segments
i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments
from a master I2C bus and a hardware MUX controlled through GPIO pins.
E.G.:
@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N.
Usage
-----
gpio-i2cmux uses the platform bus, so you need to provide a struct
i2c-gpio-mux uses the platform bus, so you need to provide a struct
platform_device with the platform_data pointing to a struct
gpio_i2cmux_platform_data with the I2C adapter number of the master
bus, the number of bus segments to create and the GPIO pins used
to control it. See include/linux/gpio-i2cmux.h for details.
to control it. See include/linux/i2c-gpio-mux.h for details.
E.G. something like this for a MUX providing 4 bus segments
controlled through 3 GPIO pins:
#include <linux/gpio-i2cmux.h>
#include <linux/i2c-gpio-mux.h>
#include <linux/platform_device.h>
static const unsigned myboard_gpiomux_gpios[] = {
@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = {
};
static struct platform_device myboard_i2cmux = {
.name = "gpio-i2cmux",
.name = "i2c-gpio-mux",
.id = 0,
.dev = {
.platform_data = &myboard_i2cmux_data,

4
Documentation/initrd.txt
View File

@ -362,5 +362,5 @@ Resources
http://www.almesberger.net/cv/papers/ols2k-9.ps.gz
[2] newlib package (experimental), with initrd example
http://sources.redhat.com/newlib/
[3] Brouwer, Andries; "util-linux: Miscellaneous utilities for Linux"
ftp://ftp.win.tue.nl/pub/linux-local/utils/util-linux/
[3] util-linux: Miscellaneous utilities for Linux
http://www.kernel.org/pub/linux/utils/util-linux/

19
Documentation/kbuild/kbuild.txt
View File

@ -50,6 +50,10 @@ LDFLAGS_MODULE
--------------------------------------------------
Additional options used for $(LD) when linking modules.
LDFLAGS_vmlinux
--------------------------------------------------
Additional options passed to final link of vmlinux.
KBUILD_VERBOSE
--------------------------------------------------
Set the kbuild verbosity. Can be assigned same values as "V=...".
@ -214,3 +218,18 @@ KBUILD_BUILD_USER, KBUILD_BUILD_HOST
These two variables allow to override the user@host string displayed during
boot and in /proc/version. The default value is the output of the commands
whoami and host, respectively.
KBUILD_LDS
--------------------------------------------------
The linker script with full path. Assigned by the top-level Makefile.
KBUILD_VMLINUX_INIT
--------------------------------------------------
All object files for the init (first) part of vmlinux.
Files specified with KBUILD_VMLINUX_INIT are linked first.
KBUILD_VMLINUX_MAIN
--------------------------------------------------
All object files for the main part of vmlinux.
KBUILD_VMLINUX_INIT and KBUILD_VMLINUX_MAIN together specify
all the object files used to link vmlinux.

18
Documentation/kbuild/kconfig.txt
View File

@ -53,15 +53,15 @@ KCONFIG_ALLCONFIG
--------------------------------------------------
(partially based on lkml email from/by Rob Landley, re: miniconfig)
--------------------------------------------------
The allyesconfig/allmodconfig/allnoconfig/randconfig variants can
also use the environment variable KCONFIG_ALLCONFIG as a flag or a
filename that contains config symbols that the user requires to be
set to a specific value. If KCONFIG_ALLCONFIG is used without a
filename, "make *config" checks for a file named
"all{yes/mod/no/def/random}.config" (corresponding to the *config command
that was used) for symbol values that are to be forced. If this file
is not found, it checks for a file named "all.config" to contain forced
values.
The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also
use the environment variable KCONFIG_ALLCONFIG as a flag or a filename
that contains config symbols that the user requires to be set to a
specific value. If KCONFIG_ALLCONFIG is used without a filename where
KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", "make *config"
checks for a file named "all{yes/mod/no/def/random}.config"
(corresponding to the *config command that was used) for symbol values
that are to be forced. If this file is not found, it checks for a
file named "all.config" to contain forced values.
This enables you to create "miniature" config (miniconfig) or custom
config files containing just the config symbols that you are interested

13
Documentation/kernel-parameters.txt
View File

@ -397,8 +397,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
atkbd.softrepeat= [HW]
Use software keyboard repeat
autotest [IA-64]
baycom_epp= [HW,AX25]
Format: <io>,<mode>
@ -508,6 +506,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Also note the kernel might malfunction if you disable
some critical bits.
cma=nn[MG] [ARM,KNL]
Sets the size of kernel global memory area for contiguous
memory allocations. For more information, see
include/linux/dma-contiguous.h
cmo_free_hint= [PPC] Format: { yes | no }
Specify whether pages are marked as being inactive
when they are freed. This is used in CMO environments
@ -515,6 +518,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
a hypervisor.
Default: yes
coherent_pool=nn[KMG] [ARM,KNL]
Sets the size of memory pool for coherent, atomic dma
allocations if Contiguous Memory Allocator (CMA) is used.
code_bytes [X86] How many bytes of object code to print
in an oops report.
Range: 0 - 8192
@ -1444,8 +1451,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
devices can be requested on-demand with the
/dev/loop-control interface.
mcatest= [IA-64]
mce [X86-32] Machine Check Exception
mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt

152
Documentation/leds/ledtrig-transient.txt Normal file
View File

@ -0,0 +1,152 @@
LED Transient Trigger
=====================
The leds timer trigger does not currently have an interface to activate
a one shot timer. The current support allows for setting two timers, one for
specifying how long a state to be on, and the second for how long the state
to be off. The delay_on value specifies the time period an LED should stay
in on state, followed by a delay_off value that specifies how long the LED
should stay in off state. The on and off cycle repeats until the trigger
gets deactivated. There is no provision for one time activation to implement
features that require an on or off state to be held just once and then stay in
the original state forever.
Without one shot timer interface, user space can still use timer trigger to
set a timer to hold a state, however when user space application crashes or
goes away without deactivating the timer, the hardware will be left in that
state permanently.
As a specific example of this use-case, let's look at vibrate feature on
phones. Vibrate function on phones is implemented using PWM pins on SoC or
PMIC. There is a need to activate one shot timer to control the vibrate
feature, to prevent user space crashes leaving the phone in vibrate mode
permanently causing the battery to drain.
Transient trigger addresses the need for one shot timer activation. The
transient trigger can be enabled and disabled just like the other leds
triggers.
When an led class device driver registers itself, it can specify all leds
triggers it supports and a default trigger. During registration, activation
routine for the default trigger gets called. During registration of an led
class device, the LED state does not change.
When the driver unregisters, deactivation routine for the currently active
trigger will be called, and LED state is changed to LED_OFF.
Driver suspend changes the LED state to LED_OFF and resume doesn't change
the state. Please note that there is no explicit interaction between the
suspend and resume actions and the currently enabled trigger. LED state
changes are suspended while the driver is in suspend state. Any timers
that are active at the time driver gets suspended, continue to run, without
being able to actually change the LED state. Once driver is resumed, triggers
start functioning again.
LED state changes are controlled using brightness which is a common led
class device property. When brightness is set to 0 from user space via
echo 0 > brightness, it will result in deactivating the current trigger.
Transient trigger uses standard register and unregister interfaces. During
trigger registration, for each led class device that specifies this trigger
as its default trigger, trigger activation routine will get called. During
registration, the LED state does not change, unless there is another trigger
active, in which case LED state changes to LED_OFF.
During trigger unregistration, LED state gets changed to LED_OFF.
Transient trigger activation routine doesn't change the LED state. It
creates its properties and does its initialization. Transient trigger
deactivation routine, will cancel any timer that is active before it cleans
up and removes the properties it created. It will restore the LED state to
non-transient state. When driver gets suspended, irrespective of the transient
state, the LED state changes to LED_OFF.
Transient trigger can be enabled and disabled from user space on led class
devices, that support this trigger as shown below:
echo transient > trigger
echo none > trigger
NOTE: Add a new property trigger state to control the state.
This trigger exports three properties, activate, state, and duration. When
transient trigger is activated these properties are set to default values.
- duration allows setting timer value in msecs. The initial value is 0.
- activate allows activating and deactivating the timer specified by
duration as needed. The initial and default value is 0. This will allow
duration to be set after trigger activation.
- state allows user to specify a transient state to be held for the specified
duration.
activate - one shot timer activate mechanism.
1 when activated, 0 when deactivated.
default value is zero when transient trigger is enabled,
to allow duration to be set.
activate state indicates a timer with a value of specified
duration running.
deactivated state indicates that there is no active timer
running.
duration - one shot timer value. When activate is set, duration value
is used to start a timer that runs once. This value doesn't
get changed by the trigger unless user does a set via
echo new_value > duration
state - transient state to be held. It has two values 0 or 1. 0 maps
to LED_OFF and 1 maps to LED_FULL. The specified state is
held for the duration of the one shot timer and then the
state gets changed to the non-transient state which is the
inverse of transient state.
If state = LED_FULL, when the timer runs out the state will
go back to LED_OFF.
If state = LED_OFF, when the timer runs out the state will
go back to LED_FULL.
Please note that current LED state is not checked prior to
changing the state to the specified state.
Driver could map these values to inverted depending on the
default states it defines for the LED in its brightness_set()
interface which is called from the led brightness_set()
interfaces to control the LED state.
When timer expires activate goes back to deactivated state, duration is left
at the set value to be used when activate is set at a future time. This will
allow user app to set the time once and activate it to run it once for the
specified value as needed. When timer expires, state is restored to the
non-transient state which is the inverse of the transient state.
echo 1 > activate - starts timer = duration when duration is not 0.
echo 0 > activate - cancels currently running timer.
echo n > duration - stores timer value to be used upon next
activate. Currently active timer if
any, continues to run for the specified time.
echo 0 > duration - stores timer value to be used upon next
activate. Currently active timer if any,
continues to run for the specified time.
echo 1 > state - stores desired transient state LED_FULL to be
held for the specified duration.
echo 0 > state - stores desired transient state LED_OFF to be
held for the specified duration.
What is not supported:
======================
- Timer activation is one shot and extending and/or shortening the timer
is not supported.
Example use-case 1:
echo transient > trigger
echo n > duration
echo 1 > state
repeat the following step as needed:
echo 1 > activate - start timer = duration to run once
echo 1 > activate - start timer = duration to run once
echo none > trigger
This trigger is intended to be used for for the following example use cases:
- Control of vibrate (phones, tablets etc.) hardware by user space app.
- Use of LED by user space app as activity indicator.
- Use of LED by user space app as a kind of watchdog indicator -- as
long as the app is alive, it can keep the LED illuminated, if it dies
the LED will be extinguished automatically.
- Use by any user space app that needs a transient GPIO output.

281
Documentation/virtual/kvm/api.txt
View File

@ -2,6 +2,7 @@ The Definitive KVM (Kernel-based Virtual Machine) API Documentation
===================================================================
1. General description
----------------------
The kvm API is a set of ioctls that are issued to control various aspects
of a virtual machine. The ioctls belong to three classes
@ -23,7 +24,9 @@ of a virtual machine. The ioctls belong to three classes
Only run vcpu ioctls from the same thread that was used to create the
vcpu.
2. File descriptors
-------------------
The kvm API is centered around file descriptors. An initial
open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
@ -41,7 +44,9 @@ not cause harm to the host, their actual behavior is not guaranteed by
the API. The only supported use is one virtual machine per process,
and one vcpu per thread.
3. Extensions
-------------
As of Linux 2.6.22, the KVM ABI has been stabilized: no backward
incompatible change are allowed. However, there is an extension
@ -53,7 +58,9 @@ Instead, kvm defines extension identifiers and a facility to query
whether a particular extension identifier is available. If it is, a
set of ioctls is available for application use.
4. API description
------------------
This section describes ioctls that can be used to control kvm guests.
For each ioctl, the following information is provided along with a
@ -75,6 +82,7 @@ description:
Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
are not detailed, but errors with specific meanings are.
4.1 KVM_GET_API_VERSION
Capability: basic
@ -90,6 +98,7 @@ supported. Applications should refuse to run if KVM_GET_API_VERSION
returns a value other than 12. If this check passes, all ioctls
described as 'basic' will be available.
4.2 KVM_CREATE_VM
Capability: basic
@ -109,6 +118,7 @@ In order to create user controlled virtual machines on S390, check
KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as
privileged user (CAP_SYS_ADMIN).
4.3 KVM_GET_MSR_INDEX_LIST
Capability: basic
@ -135,6 +145,7 @@ Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
not returned in the MSR list, as different vcpus can have a different number
of banks, as set via the KVM_X86_SETUP_MCE ioctl.
4.4 KVM_CHECK_EXTENSION
Capability: basic
@ -149,6 +160,7 @@ receives an integer that describes the extension availability.
Generally 0 means no and 1 means yes, but some extensions may report
additional information in the integer return value.
4.5 KVM_GET_VCPU_MMAP_SIZE
Capability: basic
@ -161,6 +173,7 @@ The KVM_RUN ioctl (cf.) communicates with userspace via a shared
memory region. This ioctl returns the size of that region. See the
KVM_RUN documentation for details.
4.6 KVM_SET_MEMORY_REGION
Capability: basic
@ -171,6 +184,7 @@ Returns: 0 on success, -1 on error
This ioctl is obsolete and has been removed.
4.7 KVM_CREATE_VCPU
Capability: basic
@ -223,6 +237,7 @@ machines, the resulting vcpu fd can be memory mapped at page offset
KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual
cpu's hardware control block.
4.8 KVM_GET_DIRTY_LOG (vm ioctl)
Capability: basic
@ -246,6 +261,7 @@ since the last call to this ioctl. Bit 0 is the first page in the
memory slot. Ensure the entire structure is cleared to avoid padding
issues.
4.9 KVM_SET_MEMORY_ALIAS
Capability: basic
@ -256,6 +272,7 @@ Returns: 0 (success), -1 (error)
This ioctl is obsolete and has been removed.
4.10 KVM_RUN
Capability: basic
@ -272,6 +289,7 @@ obtained by mmap()ing the vcpu fd at offset 0, with the size given by
KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct
kvm_run' (see below).
4.11 KVM_GET_REGS
Capability: basic
@ -292,6 +310,7 @@ struct kvm_regs {
__u64 rip, rflags;
};
4.12 KVM_SET_REGS
Capability: basic
@ -304,6 +323,7 @@ Writes the general purpose registers into the vcpu.
See KVM_GET_REGS for the data structure.
4.13 KVM_GET_SREGS
Capability: basic
@ -331,6 +351,7 @@ interrupt_bitmap is a bitmap of pending external interrupts. At most
one bit may be set. This interrupt has been acknowledged by the APIC
but not yet injected into the cpu core.
4.14 KVM_SET_SREGS
Capability: basic
@ -342,6 +363,7 @@ Returns: 0 on success, -1 on error
Writes special registers into the vcpu. See KVM_GET_SREGS for the
data structures.
4.15 KVM_TRANSLATE
Capability: basic
@ -365,6 +387,7 @@ struct kvm_translation {
__u8 pad[5];
};
4.16 KVM_INTERRUPT
Capability: basic
@ -413,6 +436,7 @@ c) KVM_INTERRUPT_SET_LEVEL
Note that any value for 'irq' other than the ones stated above is invalid
and incurs unexpected behavior.
4.17 KVM_DEBUG_GUEST
Capability: basic
@ -423,6 +447,7 @@ Returns: -1 on error
Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead.
4.18 KVM_GET_MSRS
Capability: basic
@ -451,6 +476,7 @@ Application code should set the 'nmsrs' member (which indicates the
size of the entries array) and the 'index' member of each array entry.
kvm will fill in the 'data' member.
4.19 KVM_SET_MSRS
Capability: basic
@ -466,6 +492,7 @@ Application code should set the 'nmsrs' member (which indicates the
size of the entries array), and the 'index' and 'data' members of each
array entry.
4.20 KVM_SET_CPUID
Capability: basic
@ -494,6 +521,7 @@ struct kvm_cpuid {
struct kvm_cpuid_entry entries[0];
};
4.21 KVM_SET_SIGNAL_MASK
Capability: basic
@ -516,6 +544,7 @@ struct kvm_signal_mask {
__u8 sigset[0];
};
4.22 KVM_GET_FPU
Capability: basic
@ -541,6 +570,7 @@ struct kvm_fpu {
__u32 pad2;
};
4.23 KVM_SET_FPU
Capability: basic
@ -566,6 +596,7 @@ struct kvm_fpu {
__u32 pad2;
};
4.24 KVM_CREATE_IRQCHIP
Capability: KVM_CAP_IRQCHIP
@ -579,6 +610,7 @@ ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
only go to the IOAPIC. On ia64, a IOSAPIC is created.
4.25 KVM_IRQ_LINE
Capability: KVM_CAP_IRQCHIP
@ -600,6 +632,7 @@ struct kvm_irq_level {
__u32 level; /* 0 or 1 */
};
4.26 KVM_GET_IRQCHIP
Capability: KVM_CAP_IRQCHIP
@ -621,6 +654,7 @@ struct kvm_irqchip {
} chip;
};
4.27 KVM_SET_IRQCHIP
Capability: KVM_CAP_IRQCHIP
@ -642,6 +676,7 @@ struct kvm_irqchip {
} chip;
};
4.28 KVM_XEN_HVM_CONFIG
Capability: KVM_CAP_XEN_HVM
@ -666,6 +701,7 @@ struct kvm_xen_hvm_config {
__u8 pad2[30];
};
4.29 KVM_GET_CLOCK
Capability: KVM_CAP_ADJUST_CLOCK
@ -684,6 +720,7 @@ struct kvm_clock_data {
__u32 pad[9];
};
4.30 KVM_SET_CLOCK
Capability: KVM_CAP_ADJUST_CLOCK
@ -702,6 +739,7 @@ struct kvm_clock_data {
__u32 pad[9];
};
4.31 KVM_GET_VCPU_EVENTS
Capability: KVM_CAP_VCPU_EVENTS
@ -741,6 +779,7 @@ struct kvm_vcpu_events {
KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
interrupt.shadow contains a valid state. Otherwise, this field is undefined.
4.32 KVM_SET_VCPU_EVENTS
Capability: KVM_CAP_VCPU_EVENTS
@ -767,6 +806,7 @@ If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in
the flags field to signal that interrupt.shadow contains a valid state and
shall be written into the VCPU.
4.33 KVM_GET_DEBUGREGS
Capability: KVM_CAP_DEBUGREGS
@ -785,6 +825,7 @@ struct kvm_debugregs {
__u64 reserved[9];
};
4.34 KVM_SET_DEBUGREGS
Capability: KVM_CAP_DEBUGREGS
@ -798,6 +839,7 @@ Writes debug registers into the vcpu.
See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
yet and must be cleared on entry.
4.35 KVM_SET_USER_MEMORY_REGION
Capability: KVM_CAP_USER_MEM
@ -844,6 +886,7 @@ It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl.
The KVM_SET_MEMORY_REGION does not allow fine grained control over memory
allocation and is deprecated.
4.36 KVM_SET_TSS_ADDR
Capability: KVM_CAP_SET_TSS_ADDR
@ -862,6 +905,7 @@ This ioctl is required on Intel-based hosts. This is needed on Intel hardware
because of a quirk in the virtualization implementation (see the internals
documentation when it pops into existence).
4.37 KVM_ENABLE_CAP
Capability: KVM_CAP_ENABLE_CAP
@ -897,6 +941,7 @@ function properly, this is the place to put them.
__u8 pad[64];
};
4.38 KVM_GET_MP_STATE
Capability: KVM_CAP_MP_STATE
@ -927,6 +972,7 @@ Possible values are:
This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
irqchip, the multiprocessing state must be maintained by userspace.
4.39 KVM_SET_MP_STATE
Capability: KVM_CAP_MP_STATE
@ -941,6 +987,7 @@ arguments.
This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
irqchip, the multiprocessing state must be maintained by userspace.
4.40 KVM_SET_IDENTITY_MAP_ADDR
Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
@ -959,6 +1006,7 @@ This ioctl is required on Intel-based hosts. This is needed on Intel hardware
because of a quirk in the virtualization implementation (see the internals
documentation when it pops into existence).
4.41 KVM_SET_BOOT_CPU_ID
Capability: KVM_CAP_SET_BOOT_CPU_ID
@ -971,6 +1019,7 @@ Define which vcpu is the Bootstrap Processor (BSP). Values are the same
as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default
is vcpu 0.
4.42 KVM_GET_XSAVE
Capability: KVM_CAP_XSAVE
@ -985,6 +1034,7 @@ struct kvm_xsave {
This ioctl would copy current vcpu's xsave struct to the userspace.
4.43 KVM_SET_XSAVE
Capability: KVM_CAP_XSAVE
@ -999,6 +1049,7 @@ struct kvm_xsave {
This ioctl would copy userspace's xsave struct to the kernel.
4.44 KVM_GET_XCRS
Capability: KVM_CAP_XCRS
@ -1022,6 +1073,7 @@ struct kvm_xcrs {
This ioctl would copy current vcpu's xcrs to the userspace.
4.45 KVM_SET_XCRS
Capability: KVM_CAP_XCRS
@ -1045,6 +1097,7 @@ struct kvm_xcrs {
This ioctl would set vcpu's xcr to the value userspace specified.
4.46 KVM_GET_SUPPORTED_CPUID
Capability: KVM_CAP_EXT_CPUID
@ -1119,6 +1172,7 @@ support. Instead it is reported via
if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the
feature in userspace, then you can enable the feature for KVM_SET_CPUID2.
4.47 KVM_PPC_GET_PVINFO
Capability: KVM_CAP_PPC_GET_PVINFO
@ -1142,6 +1196,7 @@ of 4 instructions that make up a hypercall.
If any additional field gets added to this structure later on, a bit for that
additional piece of information will be set in the flags bitmap.
4.48 KVM_ASSIGN_PCI_DEVICE
Capability: KVM_CAP_DEVICE_ASSIGNMENT
@ -1185,6 +1240,7 @@ Only PCI header type 0 devices with PCI BAR resources are supported by
device assignment. The user requesting this ioctl must have read/write
access to the PCI sysfs resource files associated with the device.
4.49 KVM_DEASSIGN_PCI_DEVICE
Capability: KVM_CAP_DEVICE_DEASSIGNMENT
@ -1198,6 +1254,7 @@ Ends PCI device assignment, releasing all associated resources.
See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is
used in kvm_assigned_pci_dev to identify the device.
4.50 KVM_ASSIGN_DEV_IRQ
Capability: KVM_CAP_ASSIGN_DEV_IRQ
@ -1231,6 +1288,7 @@ The following flags are defined:
It is not valid to specify multiple types per host or guest IRQ. However, the
IRQ type of host and guest can differ or can even be null.
4.51 KVM_DEASSIGN_DEV_IRQ
Capability: KVM_CAP_ASSIGN_DEV_IRQ
@ -1245,6 +1303,7 @@ See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
by assigned_dev_id, flags must correspond to the IRQ type specified on
KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
4.52 KVM_SET_GSI_ROUTING
Capability: KVM_CAP_IRQ_ROUTING
@ -1293,6 +1352,7 @@ struct kvm_irq_routing_msi {
__u32 pad;
};
4.53 KVM_ASSIGN_SET_MSIX_NR
Capability: KVM_CAP_DEVICE_MSIX
@ -1314,6 +1374,7 @@ struct kvm_assigned_msix_nr {
#define KVM_MAX_MSIX_PER_DEV 256
4.54 KVM_ASSIGN_SET_MSIX_ENTRY
Capability: KVM_CAP_DEVICE_MSIX
@ -1332,7 +1393,8 @@ struct kvm_assigned_msix_entry {
__u16 padding[3];
};
4.54 KVM_SET_TSC_KHZ
4.55 KVM_SET_TSC_KHZ
Capability: KVM_CAP_TSC_CONTROL
Architectures: x86
@ -1343,7 +1405,8 @@ Returns: 0 on success, -1 on error
Specifies the tsc frequency for the virtual machine. The unit of the
frequency is KHz.
4.55 KVM_GET_TSC_KHZ
4.56 KVM_GET_TSC_KHZ
Capability: KVM_CAP_GET_TSC_KHZ
Architectures: x86
@ -1355,7 +1418,8 @@ Returns the tsc frequency of the guest. The unit of the return value is
KHz. If the host has unstable tsc this ioctl returns -EIO instead as an
error.
4.56 KVM_GET_LAPIC
4.57 KVM_GET_LAPIC
Capability: KVM_CAP_IRQCHIP
Architectures: x86
@ -1371,7 +1435,8 @@ struct kvm_lapic_state {
Reads the Local APIC registers and copies them into the input argument. The
data format and layout are the same as documented in the architecture manual.
4.57 KVM_SET_LAPIC
4.58 KVM_SET_LAPIC
Capability: KVM_CAP_IRQCHIP
Architectures: x86
@ -1387,7 +1452,8 @@ struct kvm_lapic_state {
Copies the input argument into the the Local APIC registers. The data format
and layout are the same as documented in the architecture manual.
4.58 KVM_IOEVENTFD
4.59 KVM_IOEVENTFD
Capability: KVM_CAP_IOEVENTFD
Architectures: all
@ -1417,7 +1483,8 @@ The following flags are defined:
If datamatch flag is set, the event will be signaled only if the written value
to the registered address is equal to datamatch in struct kvm_ioeventfd.
4.59 KVM_DIRTY_TLB
4.60 KVM_DIRTY_TLB
Capability: KVM_CAP_SW_TLB
Architectures: ppc
@ -1449,7 +1516,8 @@ The "num_dirty" field is a performance hint for KVM to determine whether it
should skip processing the bitmap and just invalidate everything. It must
be set to the number of set bits in the bitmap.
4.60 KVM_ASSIGN_SET_INTX_MASK
4.61 KVM_ASSIGN_SET_INTX_MASK
Capability: KVM_CAP_PCI_2_3
Architectures: x86
@ -1482,6 +1550,7 @@ See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
by assigned_dev_id. In the flags field, only KVM_DEV_ASSIGN_MASK_INTX is
evaluated.
4.62 KVM_CREATE_SPAPR_TCE
Capability: KVM_CAP_SPAPR_TCE
@ -1517,6 +1586,7 @@ the entries written by kernel-handled H_PUT_TCE calls, and also lets
userspace update the TCE table directly which is useful in some
circumstances.
4.63 KVM_ALLOCATE_RMA
Capability: KVM_CAP_PPC_RMA
@ -1549,6 +1619,7 @@ is supported; 2 if the processor requires all virtual machines to have
an RMA, or 1 if the processor can use an RMA but doesn't require it,
because it supports the Virtual RMA (VRMA) facility.
4.64 KVM_NMI
Capability: KVM_CAP_USER_NMI
@ -1574,6 +1645,7 @@ following algorithm:
Some guests configure the LINT1 NMI input to cause a panic, aiding in
debugging.
4.65 KVM_S390_UCAS_MAP
Capability: KVM_CAP_S390_UCONTROL
@ -1593,6 +1665,7 @@ This ioctl maps the memory at "user_addr" with the length "length" to
the vcpu's address space starting at "vcpu_addr". All parameters need to
be alligned by 1 megabyte.
4.66 KVM_S390_UCAS_UNMAP
Capability: KVM_CAP_S390_UCONTROL
@ -1612,6 +1685,7 @@ This ioctl unmaps the memory in the vcpu's address space starting at
"vcpu_addr" with the length "length". The field "user_addr" is ignored.
All parameters need to be alligned by 1 megabyte.
4.67 KVM_S390_VCPU_FAULT
Capability: KVM_CAP_S390_UCONTROL
@ -1628,6 +1702,7 @@ table upfront. This is useful to handle validity intercepts for user
controlled virtual machines to fault in the virtual cpu's lowcore pages
prior to calling the KVM_RUN ioctl.
4.68 KVM_SET_ONE_REG
Capability: KVM_CAP_ONE_REG
@ -1653,6 +1728,7 @@ registers, find a list below:
| |
PPC | KVM_REG_PPC_HIOR | 64
4.69 KVM_GET_ONE_REG
Capability: KVM_CAP_ONE_REG
@ -1669,7 +1745,193 @@ at the memory location pointed to by "addr".
The list of registers accessible using this interface is identical to the
list in 4.64.
4.70 KVM_KVMCLOCK_CTRL
Capability: KVM_CAP_KVMCLOCK_CTRL
Architectures: Any that implement pvclocks (currently x86 only)
Type: vcpu ioctl
Parameters: None
Returns: 0 on success, -1 on error
This signals to the host kernel that the specified guest is being paused by
userspace. The host will set a flag in the pvclock structure that is checked
from the soft lockup watchdog. The flag is part of the pvclock structure that
is shared between guest and host, specifically the second bit of the flags
field of the pvclock_vcpu_time_info structure. It will be set exclusively by
the host and read/cleared exclusively by the guest. The guest operation of
checking and clearing the flag must an atomic operation so
load-link/store-conditional, or equivalent must be used. There are two cases
where the guest will clear the flag: when the soft lockup watchdog timer resets
itself or when a soft lockup is detected. This ioctl can be called any time
after pausing the vcpu, but before it is resumed.
4.71 KVM_SIGNAL_MSI
Capability: KVM_CAP_SIGNAL_MSI
Architectures: x86
Type: vm ioctl
Parameters: struct kvm_msi (in)
Returns: >0 on delivery, 0 if guest blocked the MSI, and -1 on error
Directly inject a MSI message. Only valid with in-kernel irqchip that handles
MSI messages.
struct kvm_msi {
__u32 address_lo;
__u32 address_hi;
__u32 data;
__u32 flags;
__u8 pad[16];
};
No flags are defined so far. The corresponding field must be 0.
4.71 KVM_CREATE_PIT2
Capability: KVM_CAP_PIT2
Architectures: x86
Type: vm ioctl
Parameters: struct kvm_pit_config (in)
Returns: 0 on success, -1 on error
Creates an in-kernel device model for the i8254 PIT. This call is only valid
after enabling in-kernel irqchip support via KVM_CREATE_IRQCHIP. The following
parameters have to be passed:
struct kvm_pit_config {
__u32 flags;
__u32 pad[15];
};
Valid flags are:
#define KVM_PIT_SPEAKER_DUMMY 1 /* emulate speaker port stub */
PIT timer interrupts may use a per-VM kernel thread for injection. If it
exists, this thread will have a name of the following pattern:
kvm-pit/<owner-process-pid>
When running a guest with elevated priorities, the scheduling parameters of
this thread may have to be adjusted accordingly.
This IOCTL replaces the obsolete KVM_CREATE_PIT.
4.72 KVM_GET_PIT2
Capability: KVM_CAP_PIT_STATE2
Architectures: x86
Type: vm ioctl
Parameters: struct kvm_pit_state2 (out)
Returns: 0 on success, -1 on error
Retrieves the state of the in-kernel PIT model. Only valid after
KVM_CREATE_PIT2. The state is returned in the following structure:
struct kvm_pit_state2 {
struct kvm_pit_channel_state channels[3];
__u32 flags;
__u32 reserved[9];
};
Valid flags are:
/* disable PIT in HPET legacy mode */
#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001
This IOCTL replaces the obsolete KVM_GET_PIT.
4.73 KVM_SET_PIT2
Capability: KVM_CAP_PIT_STATE2
Architectures: x86
Type: vm ioctl
Parameters: struct kvm_pit_state2 (in)
Returns: 0 on success, -1 on error
Sets the state of the in-kernel PIT model. Only valid after KVM_CREATE_PIT2.
See KVM_GET_PIT2 for details on struct kvm_pit_state2.
This IOCTL replaces the obsolete KVM_SET_PIT.
4.74 KVM_PPC_GET_SMMU_INFO
Capability: KVM_CAP_PPC_GET_SMMU_INFO
Architectures: powerpc
Type: vm ioctl
Parameters: None
Returns: 0 on success, -1 on error
This populates and returns a structure describing the features of
the "Server" class MMU emulation supported by KVM.
This can in turn be used by userspace to generate the appropariate
device-tree properties for the guest operating system.
The structure contains some global informations, followed by an
array of supported segment page sizes:
struct kvm_ppc_smmu_info {
__u64 flags;
__u32 slb_size;
__u32 pad;
struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
};
The supported flags are:
- KVM_PPC_PAGE_SIZES_REAL:
When that flag is set, guest page sizes must "fit" the backing
store page sizes. When not set, any page size in the list can
be used regardless of how they are backed by userspace.
- KVM_PPC_1T_SEGMENTS
The emulated MMU supports 1T segments in addition to the
standard 256M ones.
The "slb_size" field indicates how many SLB entries are supported
The "sps" array contains 8 entries indicating the supported base
page sizes for a segment in increasing order. Each entry is defined
as follow:
struct kvm_ppc_one_seg_page_size {
__u32 page_shift; /* Base page shift of segment (or 0) */
__u32 slb_enc; /* SLB encoding for BookS */
struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
};
An entry with a "page_shift" of 0 is unused. Because the array is
organized in increasing order, a lookup can stop when encoutering
such an entry.
The "slb_enc" field provides the encoding to use in the SLB for the
page size. The bits are in positions such as the value can directly
be OR'ed into the "vsid" argument of the slbmte instruction.
The "enc" array is a list which for each of those segment base page
size provides the list of supported actual page sizes (which can be
only larger or equal to the base page size), along with the
corresponding encoding in the hash PTE. Similarily, the array is
8 entries sorted by increasing sizes and an entry with a "0" shift
is an empty entry and a terminator:
struct kvm_ppc_one_page_size {
__u32 page_shift; /* Page shift (or 0) */
__u32 pte_enc; /* Encoding in the HPTE (>>12) */
};
The "pte_enc" field provides a value that can OR'ed into the hash
PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
into the hash PTE second double word).
5. The kvm_run structure
------------------------
Application code obtains a pointer to the kvm_run structure by
mmap()ing a vcpu fd. From that point, application code can control
@ -1910,7 +2172,9 @@ and usually define the validity of a groups of registers. (e.g. one bit
};
6. Capabilities that can be enabled
-----------------------------------
There are certain capabilities that change the behavior of the virtual CPU when
enabled. To enable them, please see section 4.37. Below you can find a list of
@ -1926,6 +2190,7 @@ The following information is provided along with the description:
Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
are not detailed, but errors with specific meanings are.
6.1 KVM_CAP_PPC_OSI
Architectures: ppc
@ -1939,6 +2204,7 @@ between the guest and the host.
When this capability is enabled, KVM_EXIT_OSI can occur.
6.2 KVM_CAP_PPC_PAPR
Architectures: ppc
@ -1957,6 +2223,7 @@ HTAB invisible to the guest.
When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur.
6.3 KVM_CAP_SW_TLB
Architectures: ppc

6
Documentation/virtual/kvm/cpuid.txt
View File

@ -10,11 +10,15 @@ a guest.
KVM cpuid functions are:
function: KVM_CPUID_SIGNATURE (0x40000000)
returns : eax = 0,
returns : eax = 0x40000001,
ebx = 0x4b4d564b,
ecx = 0x564b4d56,
edx = 0x4d.
Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM".
The value in eax corresponds to the maximum cpuid function present in this leaf,
and will be updated if more functions are added in the future.
Note also that old hosts set eax value to 0x0. This should
be interpreted as if the value was 0x40000001.
This function queries the presence of KVM cpuid leafs.

4
Documentation/virtual/kvm/msr.txt
View File

@ -108,6 +108,10 @@ MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01
| | time measures taken across
0 | 24 | multiple cpus are guaranteed to
| | be monotonic
-------------------------------------------------------------
| | guest vcpu has been paused by
1 | N/A | the host
| | See 4.70 in api.txt
-------------------------------------------------------------
Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid

62
Documentation/vm/transhuge.txt
View File

@ -166,6 +166,68 @@ behavior. So to make them effective you need to restart any
application that could have been using hugepages. This also applies to
the regions registered in khugepaged.
== Monitoring usage ==
The number of transparent huge pages currently used by the system is
available by reading the AnonHugePages field in /proc/meminfo. To
identify what applications are using transparent huge pages, it is
necessary to read /proc/PID/smaps and count the AnonHugePages fields
for each mapping. Note that reading the smaps file is expensive and
reading it frequently will incur overhead.
There are a number of counters in /proc/vmstat that may be used to
monitor how successfully the system is providing huge pages for use.
thp_fault_alloc is incremented every time a huge page is successfully
allocated to handle a page fault. This applies to both the
first time a page is faulted and for COW faults.
thp_collapse_alloc is incremented by khugepaged when it has found
a range of pages to collapse into one huge page and has
successfully allocated a new huge page to store the data.
thp_fault_fallback is incremented if a page fault fails to allocate
a huge page and instead falls back to using small pages.
thp_collapse_alloc_failed is incremented if khugepaged found a range
of pages that should be collapsed into one huge page but failed
the allocation.
thp_split is incremented every time a huge page is split into base
pages. This can happen for a variety of reasons but a common
reason is that a huge page is old and is being reclaimed.
As the system ages, allocating huge pages may be expensive as the
system uses memory compaction to copy data around memory to free a
huge page for use. There are some counters in /proc/vmstat to help
monitor this overhead.
compact_stall is incremented every time a process stalls to run
memory compaction so that a huge page is free for use.
compact_success is incremented if the system compacted memory and
freed a huge page for use.
compact_fail is incremented if the system tries to compact memory
but failed.
compact_pages_moved is incremented each time a page is moved. If
this value is increasing rapidly, it implies that the system
is copying a lot of data to satisfy the huge page allocation.
It is possible that the cost of copying exceeds any savings
from reduced TLB misses.
compact_pagemigrate_failed is incremented when the underlying mechanism
for moving a page failed.
compact_blocks_moved is incremented each time memory compaction examines
a huge page aligned range of pages.
It is possible to establish how long the stalls were using the function
tracer to record how long was spent in __alloc_pages_nodemask and
using the mm_page_alloc tracepoint to identify which allocations were
for huge pages.
== get_user_pages and follow_page ==
get_user_pages and follow_page if run on a hugepage, will return the

51
MAINTAINERS
View File

@ -1905,6 +1905,16 @@ F: Documentation/filesystems/coda.txt
F: fs/coda/
F: include/linux/coda*.h
COMMON CLK FRAMEWORK
M: Mike Turquette <mturquette@ti.com>
M: Mike Turquette <mturquette@linaro.org>
L: linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
T: git git://git.linaro.org/people/mturquette/linux.git
S: Maintained
F: drivers/clk/clk.c
F: drivers/clk/clk-*
F: include/linux/clk-pr*
COMMON INTERNET FILE SYSTEM (CIFS)
M: Steve French <sfrench@samba.org>
L: linux-cifs@vger.kernel.org
@ -2978,9 +2988,9 @@ GENERIC GPIO I2C MULTIPLEXER DRIVER
M: Peter Korsgaard <peter.korsgaard@barco.com>
L: linux-i2c@vger.kernel.org
S: Supported
F: drivers/i2c/muxes/gpio-i2cmux.c
F: include/linux/gpio-i2cmux.h
F: Documentation/i2c/muxes/gpio-i2cmux
F: drivers/i2c/muxes/i2c-mux-gpio.c
F: include/linux/i2c-mux-gpio.h
F: Documentation/i2c/muxes/i2c-mux-gpio
GENERIC HDLC (WAN) DRIVERS
M: Krzysztof Halasa <khc@pm.waw.pl>
@ -3222,10 +3232,8 @@ F: include/linux/clockchips.h
F: include/linux/hrtimer.h
HIGH-SPEED SCC DRIVER FOR AX.25
M: Klaus Kudielka <klaus.kudielka@ieee.org>
L: linux-hams@vger.kernel.org
W: http://www.nt.tuwien.ac.at/~kkudielk/Linux/
S: Maintained
S: Orphan
F: drivers/net/hamradio/dmascc.c
F: drivers/net/hamradio/scc.c
@ -3372,6 +3380,12 @@ W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html
S: Supported
F: drivers/scsi/ips.*
ICH LPC AND GPIO DRIVER
M: Peter Tyser <ptyser@xes-inc.com>
S: Maintained
F: drivers/mfd/lpc_ich.c
F: drivers/gpio/gpio-ich.c
IDE SUBSYSTEM
M: "David S. Miller" <davem@davemloft.net>
L: linux-ide@vger.kernel.org
@ -4495,12 +4509,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/mmc/host/imxmmc.*
MOUSE AND MISC DEVICES [GENERAL]
M: Alessandro Rubini <rubini@ipvvis.unipv.it>
S: Maintained
F: drivers/input/mouse/
F: include/linux/gpio_mouse.h
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
@ -5138,7 +5146,7 @@ PCA9541 I2C BUS MASTER SELECTOR DRIVER
M: Guenter Roeck <guenter.roeck@ericsson.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/muxes/pca9541.c
F: drivers/i2c/muxes/i2c-mux-pca9541.c
PCA9564/PCA9665 I2C BUS DRIVER
M: Wolfram Sang <w.sang@pengutronix.de>
@ -6340,14 +6348,25 @@ F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -6356,6 +6375,8 @@ F: arch/arm/mach-spear3xx/
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -6368,9 +6389,7 @@ L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear*/clock.c
F: arch/arm/plat-spear/clock.c
F: arch/arm/plat-spear/include/plat/clock.h
F: drivers/clk/spear/
SPI SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>

231
Makefile
View File

@ -231,10 +231,6 @@ endif
# Where to locate arch specific headers
hdr-arch := $(SRCARCH)
ifeq ($(ARCH),m68knommu)
hdr-arch := m68k
endif
KCONFIG_CONFIG ?= .config
export KCONFIG_CONFIG
@ -341,7 +337,6 @@ AWK = awk
GENKSYMS = scripts/genksyms/genksyms
INSTALLKERNEL := installkernel
DEPMOD = /sbin/depmod
KALLSYMS = scripts/kallsyms
PERL = perl
CHECK = sparse
@ -739,197 +734,21 @@ libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
libs-y := $(libs-y1) $(libs-y2)
# Build vmlinux
# ---------------------------------------------------------------------------
# vmlinux is built from the objects selected by $(vmlinux-init) and
# $(vmlinux-main). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
# Ordering when linking is important, and $(vmlinux-init) must be first.
#
# vmlinux
# ^
# |
# +-< $(vmlinux-init)
# | +--< init/version.o + more
# |
# +--< $(vmlinux-main)
# | +--< driver/built-in.o mm/built-in.o + more
# |
# +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
#
# vmlinux version (uname -v) cannot be updated during normal
# descending-into-subdirs phase since we do not yet know if we need to
# update vmlinux.
# Therefore this step is delayed until just before final link of vmlinux -
# except in the kallsyms case where it is done just before adding the
# symbols to the kernel.
#
# System.map is generated to document addresses of all kernel symbols
# Externally visible symbols (used by link-vmlinux.sh)
export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y)
export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
export LDFLAGS_vmlinux
vmlinux-init := $(head-y) $(init-y)
vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
vmlinux-all := $(vmlinux-init) $(vmlinux-main)
vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
# Rule to link vmlinux - also used during CONFIG_KALLSYMS
# May be overridden by arch/$(ARCH)/Makefile
quiet_cmd_vmlinux__ ?= LD $@
cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
-T $(vmlinux-lds) $(vmlinux-init) \
--start-group $(vmlinux-main) --end-group \
$(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
# Final link of vmlinux
cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
quiet_cmd_link-vmlinux = LINK $@
# Generate new vmlinux version
quiet_cmd_vmlinux_version = GEN .version
cmd_vmlinux_version = set -e; \
if [ ! -r .version ]; then \
rm -f .version; \
echo 1 >.version; \
else \
mv .version .old_version; \
expr 0$$(cat .old_version) + 1 >.version; \
fi; \
$(MAKE) $(build)=init
# Generate System.map
quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Sort exception table at build time
quiet_cmd_sortextable = SORTEX
cmd_sortextable = $(objtree)/scripts/sortextable
# Link of vmlinux
# If CONFIG_KALLSYMS is set .version is already updated
# Generate System.map and verify that the content is consistent
# Use + in front of the vmlinux_version rule to silent warning with make -j2
# First command is ':' to allow us to use + in front of the rule
define rule_vmlinux__
:
$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
$(if $(CONFIG_BUILDTIME_EXTABLE_SORT), \
$(Q)$(if $($(quiet)cmd_sortextable), \
echo ' $($(quiet)cmd_sortextable) vmlinux' &&) \
$(cmd_sortextable) vmlinux)
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) System.map' &&) \
$(cmd_sysmap) $@ System.map; \
if [ $$? -ne 0 ]; then \
rm -f $@; \
/bin/false; \
fi;
$(verify_kallsyms)
endef
ifdef CONFIG_KALLSYMS
# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
# It's a three stage process:
# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
# empty
# Running kallsyms on that gives us .tmp_kallsyms1.o with
# the right size - vmlinux version (uname -v) is updated during this step
# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
# but due to the added section, some addresses have shifted.
# From here, we generate a correct .tmp_kallsyms2.o
# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
# o Verify that the System.map from vmlinux matches the map from
# .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a
# temporary bypass to allow the kernel to be built while the
# maintainers work out what went wrong with kallsyms.
last_kallsyms := 2
ifdef KALLSYMS_EXTRA_PASS
ifneq ($(KALLSYMS_EXTRA_PASS),0)
last_kallsyms := 3
endif
endif
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
define verify_kallsyms
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
$(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
$(Q)cmp -s System.map .tmp_System.map || \
(echo Inconsistent kallsyms data; \
echo This is a bug - please report about it; \
echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround; \
rm .tmp_kallsyms* ; /bin/false )
endef
# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
:
+$(call cmd,vmlinux_version)
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
endef
# Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM $@
cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
$(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S)
.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
$(call cmd,kallsyms)
# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
$(call if_changed_rule,ksym_ld)
.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
$(call if_changed,vmlinux__)
.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
$(call if_changed,vmlinux__)
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
# Generate some data for debugging strange kallsyms problems
debug_kallsyms: .tmp_map$(last_kallsyms)
.tmp_map%: .tmp_vmlinux% FORCE
($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
.tmp_map3: .tmp_map2
.tmp_map2: .tmp_map1
endif # ifdef CONFIG_KALLSYMS
# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
# relevant sections renamed as per the linker script.
quiet_cmd_vmlinux-modpost = LD $@
cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \
$(vmlinux-init) --start-group $(vmlinux-main) --end-group \
$(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
define rule_vmlinux-modpost
:
+$(call cmd,vmlinux-modpost)
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
$(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
endef
# vmlinux image - including updated kernel symbols
vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
# Include targets which we want to
# execute if the rest of the kernel build went well.
vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
ifdef CONFIG_HEADERS_CHECK
$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
endif
@ -939,22 +758,11 @@ endif
ifdef CONFIG_BUILD_DOCSRC
$(Q)$(MAKE) $(build)=Documentation
endif
$(call vmlinux-modpost)
$(call if_changed_rule,vmlinux__)
$(Q)rm -f .old_version
# build vmlinux.o first to catch section mismatch errors early
ifdef CONFIG_KALLSYMS
.tmp_vmlinux1: vmlinux.o
endif
modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
$(call if_changed_rule,vmlinux-modpost)
+$(call if_changed,link-vmlinux)
# The actual objects are generated when descending,
# make sure no implicit rule kicks in
$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
$(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
# Handle descending into subdirectories listed in $(vmlinux-dirs)
# Preset locale variables to speed up the build process. Limit locale
@ -1181,8 +989,6 @@ endif # CONFIG_MODULES
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR)
CLEAN_FILES += vmlinux System.map \
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config usr/include include/generated \
@ -1428,6 +1234,7 @@ scripts: ;
endif # KBUILD_EXTMOD
clean: $(clean-dirs)
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
@ -1568,14 +1375,6 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
$(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
$(KBUILD_AFLAGS_KERNEL) \
$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
$(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
# read all saved command lines
targets := $(wildcard $(sort $(targets)))

3
arch/Kconfig
View File

@ -159,6 +159,9 @@ config HAVE_ARCH_TRACEHOOK
config HAVE_DMA_ATTRS
bool
config HAVE_DMA_CONTIGUOUS
bool
config USE_GENERIC_SMP_HELPERS
bool

1
arch/alpha/include/asm/kvm_para.h Normal file
View File

@ -0,0 +1 @@
#include <asm-generic/kvm_para.h>

16
arch/arm/Kconfig
View File

@ -5,6 +5,9 @@ config ARM
select HAVE_AOUT
select HAVE_DMA_API_DEBUG
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
select CMA if (CPU_V6 || CPU_V6K || CPU_V7)
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
@ -54,6 +57,14 @@ config ARM
config ARM_HAS_SG_CHAIN
bool
config NEED_SG_DMA_LENGTH
bool
config ARM_DMA_USE_IOMMU
select NEED_SG_DMA_LENGTH
select ARM_HAS_SG_CHAIN
bool
config HAVE_PWM
bool
@ -445,8 +456,10 @@ config ARCH_MXS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select COMMON_CLK
select HAVE_CLK_PREPARE
select PINCTRL
select USE_OF
help
Support for Freescale MXS-based family of processors
@ -936,6 +949,7 @@ config PLAT_SPEAR
select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select COMMON_CLK
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
@ -1040,7 +1054,6 @@ source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
@ -1091,6 +1104,7 @@ config PLAT_ORION
bool
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select COMMON_CLK
config PLAT_PXA
bool

37
arch/arm/Kconfig.debug
View File

@ -103,6 +103,35 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DA8XX_UART2
bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART2 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DMx_UART0
bool "Kernel low-level debugging on DaVinci DMx using UART0"
depends on ARCH_DAVINCI_DMx
help
Say Y here if you want the debug print routines to direct
their output to UART0 serial port on DaVinci DMx devices.
config DEBUG_DAVINCI_TNETV107X_UART1
bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
depends on ARCH_DAVINCI_TNETV107X
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci TNETV107X
devices.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
@ -180,6 +209,14 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
config DEBUG_IMX6Q_UART2
bool "i.MX6Q Debug UART2"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
on i.MX6Q UART2. This is correct for e.g. the SabreLite
board.
config DEBUG_IMX6Q_UART4
bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q

8
arch/arm/Makefile
View File

@ -160,9 +160,7 @@ machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
@ -188,6 +186,8 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
machine-$(CONFIG_MACH_SPEAR320) := spear3xx
@ -205,7 +205,7 @@ plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
plat-$(CONFIG_PLAT_S5P) := samsung
plat-$(CONFIG_PLAT_SPEAR) := spear
plat-$(CONFIG_PLAT_VERSATILE) := versatile

48
arch/arm/boot/dts/exynos5250-smdk5250.dts
View File

@ -23,4 +23,52 @@
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
};
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
};
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 2 2 3 0>,
<&gpb3 3 2 3 0>;
eeprom@51 {
compatible = "samsung,s524ad0xd1";
reg = <0x51>;
};
};
i2c@12C80000 {
status = "disabled";
};
i2c@12C90000 {
status = "disabled";
};
i2c@12CA0000 {
status = "disabled";
};
i2c@12CB0000 {
status = "disabled";
};
i2c@12CC0000 {
status = "disabled";
};
i2c@12CD0000 {
status = "disabled";
};
};

60
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -23,11 +23,11 @@
compatible = "samsung,exynos5250";
interrupt-parent = <&gic>;
gic:interrupt-controller@10490000 {
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
};
watchdog {
@ -42,30 +42,6 @@
interrupts = <0 43 0>, <0 44 0>;
};
sdhci@12200000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12200000 0x100>;
interrupts = <0 75 0>;
};
sdhci@12210000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12210000 0x100>;
interrupts = <0 76 0>;
};
sdhci@12220000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12220000 0x100>;
interrupts = <0 77 0>;
};
sdhci@12230000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12230000 0x100>;
interrupts = <0 78 0>;
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
@ -94,48 +70,64 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
};
amba {
@ -157,13 +149,13 @@
interrupts = <0 35 0>;
};
mdma0: pdma@10800000 {
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
};
mdma1: pdma@11C10000 {
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
@ -242,6 +234,12 @@
#gpio-cells = <4>;
};
gpc4: gpio-controller@114002E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114002E0 0x20>;
#gpio-cells = <4>;
};
gpd0: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
@ -388,19 +386,19 @@
gpv2: gpio-controller@10D10040 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10040 0x20>;
reg = <0x10D10060 0x20>;
#gpio-cells = <4>;
};
gpv3: gpio-controller@10D10060 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10060 0x20>;
reg = <0x10D10080 0x20>;
#gpio-cells = <4>;
};
gpv4: gpio-controller@10D10080 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10080 0x20>;
reg = <0x10D100C0 0x20>;
#gpio-cells = <4>;
};

43
arch/arm/boot/dts/imx23-evk.dts Normal file
View File

@ -0,0 +1,43 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx23.dtsi"
/ {
model = "Freescale i.MX23 Evaluation Kit";
compatible = "fsl,imx23-evk", "fsl,imx23";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
apbh@80000000 {
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
bus-width = <8>;
wp-gpios = <&gpio1 30 0>;
status = "okay";
};
};
apbx@80040000 {
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
};
};
};

295
arch/arm/boot/dts/imx23.dtsi Normal file
View File

@ -0,0 +1,295 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&icoll>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
};
cpus {
cpu@0 {
compatible = "arm,arm926ejs";
};
};
apb@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x80000>;
ranges;
apbh@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x40000>;
ranges;
icoll: interrupt-controller@80000000 {
compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x80000000 0x2000>;
};
dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh";
reg = <0x80004000 2000>;
};
ecc@80008000 {
reg = <0x80008000 2000>;
status = "disabled";
};
bch@8000a000 {
reg = <0x8000a000 2000>;
status = "disabled";
};
gpmi@8000c000 {
reg = <0x8000c000 2000>;
status = "disabled";
};
ssp0: ssp@80010000 {
reg = <0x80010000 2000>;
interrupts = <15 14>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
etm@80014000 {
reg = <0x80014000 2000>;
status = "disabled";
};
pinctrl@80018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-pinctrl", "simple-bus";
reg = <0x80018000 2000>;
gpio0: gpio@0 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
interrupts = <16>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@1 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
interrupts = <17>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@2 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
interrupts = <18>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
duart_pins_a: duart@0 {
reg = <0>;
fsl,pinmux-ids = <0x11a2 0x11b2>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
fsl,pinmux-ids = <0x2020 0x2030 0x2040
0x2050 0x0082 0x0092 0x00a2
0x00b2 0x2000 0x2010 0x2060>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_pins_fixup: mmc0-pins-fixup {
fsl,pinmux-ids = <0x2010 0x2060>;
fsl,pull-up = <0>;
};
};
digctl@8001c000 {
reg = <0x8001c000 2000>;
status = "disabled";
};
emi@80020000 {
reg = <0x80020000 2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
reg = <0x80024000 2000>;
};
dcp@80028000 {
reg = <0x80028000 2000>;
status = "disabled";
};
pxp@8002a000 {
reg = <0x8002a000 2000>;
status = "disabled";
};
ocotp@8002c000 {
reg = <0x8002c000 2000>;
status = "disabled";
};
axi-ahb@8002e000 {
reg = <0x8002e000 2000>;
status = "disabled";
};
lcdif@80030000 {
reg = <0x80030000 2000>;
status = "disabled";
};
ssp1: ssp@80034000 {
reg = <0x80034000 2000>;
interrupts = <2 20>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
tvenc@80038000 {
reg = <0x80038000 2000>;
status = "disabled";
};
};
apbx@80040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80040000 0x40000>;
ranges;
clkctl@80040000 {
reg = <0x80040000 2000>;
status = "disabled";
};
saif0: saif@80042000 {
reg = <0x80042000 2000>;
status = "disabled";
};
power@80044000 {
reg = <0x80044000 2000>;
status = "disabled";
};
saif1: saif@80046000 {
reg = <0x80046000 2000>;
status = "disabled";
};
audio-out@80048000 {
reg = <0x80048000 2000>;
status = "disabled";
};
audio-in@8004c000 {
reg = <0x8004c000 2000>;
status = "disabled";
};
lradc@80050000 {
reg = <0x80050000 2000>;
status = "disabled";
};
spdif@80054000 {
reg = <0x80054000 2000>;
status = "disabled";
};
i2c@80058000 {
reg = <0x80058000 2000>;
status = "disabled";
};
rtc@8005c000 {
reg = <0x8005c000 2000>;
status = "disabled";
};
pwm@80064000 {
reg = <0x80064000 2000>;
status = "disabled";
};
timrot@80068000 {
reg = <0x80068000 2000>;
status = "disabled";
};
auart0: serial@8006c000 {
reg = <0x8006c000 0x2000>;
status = "disabled";
};
auart1: serial@8006e000 {
reg = <0x8006e000 0x2000>;
status = "disabled";
};
duart: serial@80070000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80070000 0x2000>;
interrupts = <0>;
status = "disabled";
};
usbphy@8007c000 {
reg = <0x8007c000 0x2000>;
status = "disabled";
};
};
};
ahb@80080000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80080000 0x80000>;
ranges;
usbctrl@80080000 {
reg = <0x80080000 0x10000>;
status = "disabled";
};
};
};

8
arch/arm/boot/dts/imx27-phytec-phycore.dts
View File

@ -27,22 +27,22 @@
status = "okay";
};
uart@1000a000 {
serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
uart@1000b000 {
serial@1000b000 {
fsl,uart-has-rtscts;
status = "okay";
};
uart@1000c000 {
serial@1000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
fec@1002b000 {
ethernet@1002b000 {
status = "okay";
};

14
arch/arm/boot/dts/imx27.dtsi
View File

@ -59,28 +59,28 @@
status = "disabled";
};
uart1: uart@1000a000 {
uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
status = "disabled";
};
uart2: uart@1000b000 {
uart2: serial@1000b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
status = "disabled";
};
uart3: uart@1000c000 {
uart3: serial@1000c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
status = "disabled";
};
uart4: uart@1000d000 {
uart4: serial@1000d000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
@ -183,14 +183,14 @@
status = "disabled";
};
uart5: uart@1001b000 {
uart5: serial@1001b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
status = "disabled";
};
uart6: uart@1001c000 {
uart6: serial@1001c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
@ -206,7 +206,7 @@
status = "disabled";
};
fec: fec@1002b000 {
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
interrupts = <50>;

114
arch/arm/boot/dts/imx28-evk.dts Normal file
View File

@ -0,0 +1,114 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "Freescale i.MX28 Evaluation Kit";
compatible = "fsl,imx28-evk", "fsl,imx28";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
apbh@80000000 {
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
&mmc0_cd_cfg &mmc0_sck_cfg>;
bus-width = <8>;
wp-gpios = <&gpio2 12 0>;
status = "okay";
};
ssp1: ssp@80012000 {
compatible = "fsl,imx28-mmc";
bus-width = <8>;
wp-gpios = <&gpio0 28 0>;
status = "okay";
};
};
apbx@80040000 {
saif0: saif@80042000 {
pinctrl-names = "default";
pinctrl-0 = <&saif0_pins_a>;
status = "okay";
};
saif1: saif@80046000 {
pinctrl-names = "default";
pinctrl-0 = <&saif1_pins_a>;
fsl,saif-master = <&saif0>;
status = "okay";
};
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
};
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
status = "okay";
};
mac1: ethernet@800f4000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac1_pins_a>;
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
sound {
compatible = "fsl,imx28-evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
model = "imx28-evk-sgtl5000";
saif-controllers = <&saif0 &saif1>;
audio-codec = <&sgtl5000>;
};
};

497
arch/arm/boot/dts/imx28.dtsi Normal file
View File

@ -0,0 +1,497 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&icoll>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
saif0 = &saif0;
saif1 = &saif1;
};
cpus {
cpu@0 {
compatible = "arm,arm926ejs";
};
};
apb@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x80000>;
ranges;
apbh@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x3c900>;
ranges;
icoll: interrupt-controller@80000000 {
compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x80000000 0x2000>;
};
hsadc@80002000 {
reg = <0x80002000 2000>;
interrupts = <13 87>;
status = "disabled";
};
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
reg = <0x80004000 2000>;
};
perfmon@80006000 {
reg = <0x80006000 800>;
interrupts = <27>;
status = "disabled";
};
bch@8000a000 {
reg = <0x8000a000 2000>;
interrupts = <41>;
status = "disabled";
};
gpmi@8000c000 {
reg = <0x8000c000 2000>;
interrupts = <42 88>;
status = "disabled";
};
ssp0: ssp@80010000 {
reg = <0x80010000 2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
reg = <0x80012000 2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
reg = <0x80014000 2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
reg = <0x80016000 2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
};
pinctrl@80018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
reg = <0x80018000 2000>;
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <127>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@1 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <126>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@2 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <125>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@3 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <124>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@4 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <123>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
duart_pins_a: duart@0 {
reg = <0>;
fsl,pinmux-ids = <0x3102 0x3112>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <0x4000 0x4010 0x4020
0x4030 0x4040 0x4060 0x4070
0x4080 0x4100>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mac1_pins_a: mac1@0 {
reg = <0>;
fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
0x40e1 0x40b1 0x40c1>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
fsl,pinmux-ids = <0x2000 0x2010 0x2020
0x2030 0x2040 0x2050 0x2060
0x2070 0x2080 0x2090 0x20a0>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_cd_cfg: mmc0-cd-cfg {
fsl,pinmux-ids = <0x2090>;
fsl,pull-up = <0>;
};
mmc0_sck_cfg: mmc0-sck-cfg {
fsl,pinmux-ids = <0x20a0>;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
i2c0_pins_a: i2c0@0 {
reg = <0>;
fsl,pinmux-ids = <0x3180 0x3190>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
saif0_pins_a: saif0@0 {
reg = <0>;
fsl,pinmux-ids =
<0x3140 0x3150 0x3160 0x3170>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
saif1_pins_a: saif1@0 {
reg = <0>;
fsl,pinmux-ids = <0x31a0>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
};
digctl@8001c000 {
reg = <0x8001c000 2000>;
interrupts = <89>;
status = "disabled";
};
etm@80022000 {
reg = <0x80022000 2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
reg = <0x80024000 2000>;
};
dcp@80028000 {
reg = <0x80028000 2000>;
interrupts = <52 53 54>;
status = "disabled";
};
pxp@8002a000 {
reg = <0x8002a000 2000>;
interrupts = <39>;
status = "disabled";
};
ocotp@8002c000 {
reg = <0x8002c000 2000>;
status = "disabled";
};
axi-ahb@8002e000 {
reg = <0x8002e000 2000>;
status = "disabled";
};
lcdif@80030000 {
reg = <0x80030000 2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
reg = <0x80032000 2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
reg = <0x80034000 2000>;
interrupts = <9>;
status = "disabled";
};
simdbg@8003c000 {
reg = <0x8003c000 200>;
status = "disabled";
};
simgpmisel@8003c200 {
reg = <0x8003c200 100>;
status = "disabled";
};
simsspsel@8003c300 {
reg = <0x8003c300 100>;
status = "disabled";
};
simmemsel@8003c400 {
reg = <0x8003c400 100>;
status = "disabled";
};
gpiomon@8003c500 {
reg = <0x8003c500 100>;
status = "disabled";
};
simenet@8003c700 {
reg = <0x8003c700 100>;
status = "disabled";
};
armjtag@8003c800 {
reg = <0x8003c800 100>;
status = "disabled";
};
};
apbx@80040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80040000 0x40000>;
ranges;
clkctl@80040000 {
reg = <0x80040000 2000>;
status = "disabled";
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
reg = <0x80042000 2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power@80044000 {
reg = <0x80044000 2000>;
status = "disabled";
};
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
reg = <0x80046000 2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
reg = <0x80050000 2000>;
status = "disabled";
};
spdif@80054000 {
reg = <0x80054000 2000>;
interrupts = <45 66>;
status = "disabled";
};
rtc@80056000 {
reg = <0x80056000 2000>;
interrupts = <28 29>;
status = "disabled";
};
i2c0: i2c@80058000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
interrupts = <111 68>;
status = "disabled";
};
i2c1: i2c@8005a000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x8005a000 2000>;
interrupts = <110 69>;
status = "disabled";
};
pwm@80064000 {
reg = <0x80064000 2000>;
status = "disabled";
};
timrot@80068000 {
reg = <0x80068000 2000>;
status = "disabled";
};
auart0: serial@8006a000 {
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
status = "disabled";
};
auart1: serial@8006c000 {
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
status = "disabled";
};
auart2: serial@8006e000 {
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
status = "disabled";
};
auart3: serial@80070000 {
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
status = "disabled";
};
auart4: serial@80072000 {
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
status = "disabled";
};
duart: serial@80074000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80074000 0x1000>;
interrupts = <47>;
status = "disabled";
};
usbphy0: usbphy@8007c000 {
reg = <0x8007c000 0x2000>;
status = "disabled";
};
usbphy1: usbphy@8007e000 {
reg = <0x8007e000 0x2000>;
status = "disabled";
};
};
};
ahb@80080000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80080000 0x80000>;
ranges;
usbctrl0: usbctrl@80080000 {
reg = <0x80080000 0x10000>;
status = "disabled";
};
usbctrl1: usbctrl@80090000 {
reg = <0x80090000 0x10000>;
status = "disabled";
};
dflpt@800c0000 {
reg = <0x800c0000 0x10000>;
status = "disabled";
};
mac0: ethernet@800f0000 {
compatible = "fsl,imx28-fec";
reg = <0x800f0000 0x4000>;
interrupts = <101>;
status = "disabled";
};
mac1: ethernet@800f4000 {
compatible = "fsl,imx28-fec";
reg = <0x800f4000 0x4000>;
interrupts = <102>;
status = "disabled";
};
switch@800f8000 {
reg = <0x800f8000 0x8000>;
status = "disabled";
};
};
};

40
arch/arm/boot/dts/imx51-babbage.dts
View File

@ -17,10 +17,6 @@
model = "Freescale i.MX51 Babbage Board";
compatible = "fsl,imx51-babbage", "fsl,imx51";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
};
memory {
reg = <0x90000000 0x20000000>;
};
@ -40,7 +36,7 @@
status = "okay";
};
uart3: uart@7000c000 {
uart3: serial@7000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
@ -166,6 +162,11 @@
};
};
};
ssi2: ssi@70014000 {
fsl,mode = "i2s-slave";
status = "okay";
};
};
wdog@73f98000 { /* WDOG1 */
@ -177,12 +178,12 @@
reg = <0x73fa8000 0x4000>;
};
uart1: uart@73fbc000 {
uart1: serial@73fbc000 {
fsl,uart-has-rtscts;
status = "okay";
};
uart2: uart@73fc0000 {
uart2: serial@73fc0000 {
status = "okay";
};
};
@ -195,13 +196,20 @@
i2c@83fc4000 { /* I2C2 */
status = "okay";
codec: sgtl5000@0a {
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clock-frequency = <26000000>;
VDDA-supply = <&vdig_reg>;
VDDIO-supply = <&vvideo_reg>;
};
};
fec@83fec000 {
audmux@83fd0000 {
status = "okay";
};
ethernet@83fec000 {
phy-mode = "mii";
status = "okay";
};
@ -218,4 +226,18 @@
gpio-key,wakeup;
};
};
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx51-babbage-sgtl5000";
ssi-controller = <&ssi2>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <2>;
mux-ext-port = <3>;
};
};

41
arch/arm/boot/dts/imx51.dtsi
View File

@ -86,7 +86,7 @@
status = "disabled";
};
uart3: uart@7000c000 {
uart3: serial@7000c000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
@ -102,6 +102,15 @@
status = "disabled";
};
ssi2: ssi@70014000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
esdhc@70020000 { /* ESDHC3 */
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
@ -171,14 +180,14 @@
status = "disabled";
};
uart1: uart@73fbc000 {
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
uart2: uart@73fc0000 {
uart2: serial@73fc0000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
@ -235,7 +244,31 @@
status = "disabled";
};
fec@83fec000 {
ssi1: ssi@83fcc000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
audmux@83fd0000 {
compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
reg = <0x83fd0000 0x4000>;
status = "disabled";
};
ssi3: ssi@83fe8000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;

6
arch/arm/boot/dts/imx53-ard.dts
View File

@ -17,10 +17,6 @@
model = "Freescale i.MX53 Automotive Reference Design Board";
compatible = "fsl,imx53-ard", "fsl,imx53";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
};
memory {
reg = <0x70000000 0x40000000>;
};
@ -44,7 +40,7 @@
reg = <0x53fa8000 0x4000>;
};
uart1: uart@53fbc000 {
uart1: serial@53fbc000 {
status = "okay";
};
};

8
arch/arm/boot/dts/imx53-evk.dts
View File

@ -17,10 +17,6 @@
model = "Freescale i.MX53 Evaluation Kit";
compatible = "fsl,imx53-evk", "fsl,imx53";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
};
memory {
reg = <0x70000000 0x80000000>;
};
@ -75,7 +71,7 @@
reg = <0x53fa8000 0x4000>;
};
uart1: uart@53fbc000 {
uart1: serial@53fbc000 {
status = "okay";
};
};
@ -99,7 +95,7 @@
};
};
fec@63fec000 {
ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";

121
arch/arm/boot/dts/imx53-qsb.dts
View File

@ -17,10 +17,6 @@
model = "Freescale i.MX53 Quick Start Board";
compatible = "fsl,imx53-qsb", "fsl,imx53";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
};
memory {
reg = <0x70000000 0x40000000>;
};
@ -33,6 +29,11 @@
status = "okay";
};
ssi2: ssi@50014000 {
fsl,mode = "i2s-slave";
status = "okay";
};
esdhc@50020000 { /* ESDHC3 */
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
@ -49,7 +50,7 @@
reg = <0x53fa8000 0x4000>;
};
uart1: uart@53fbc000 {
uart1: serial@53fbc000 {
status = "okay";
};
};
@ -62,9 +63,11 @@
i2c@63fc4000 { /* I2C2 */
status = "okay";
codec: sgtl5000@0a {
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p2v>;
VDDIO-supply = <&reg_3p2v>;
};
};
@ -77,12 +80,88 @@
};
pmic: dialog@48 {
compatible = "dialog,da9053", "dialog,da9052";
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
regulators {
buck0 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
};
buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
};
buck2 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
};
buck3 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
};
ldo4 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
};
ldo5 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
};
ldo6 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
};
ldo9 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
};
ldo10 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
};
ldo11 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
};
ldo12 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
};
ldo13 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
};
};
};
};
fec@63fec000 {
audmux@63fd0000 {
status = "okay";
};
ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
@ -122,4 +201,30 @@
linux,default-trigger = "heartbeat";
};
};
regulators {
compatible = "simple-bus";
reg_3p2v: 3p2v {
compatible = "regulator-fixed";
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
};
sound {
compatible = "fsl,imx53-qsb-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx53-qsb-sgtl5000";
ssi-controller = <&ssi2>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <2>;
mux-ext-port = <5>;
};
};

16
arch/arm/boot/dts/imx53-smd.dts
View File

@ -17,10 +17,6 @@
model = "Freescale i.MX53 Smart Mobile Reference Design Board";
compatible = "fsl,imx53-smd", "fsl,imx53";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
};
memory {
reg = <0x70000000 0x40000000>;
};
@ -35,11 +31,11 @@
};
esdhc@50008000 { /* ESDHC2 */
fsl,card-wired;
non-removable;
status = "okay";
};
uart3: uart@5000c000 {
uart3: serial@5000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
@ -76,7 +72,7 @@
};
esdhc@50020000 { /* ESDHC3 */
fsl,card-wired;
non-removable;
status = "okay";
};
};
@ -90,11 +86,11 @@
reg = <0x53fa8000 0x4000>;
};
uart1: uart@53fbc000 {
uart1: serial@53fbc000 {
status = "okay";
};
uart2: uart@53fc0000 {
uart2: serial@53fc0000 {
status = "okay";
};
};
@ -142,7 +138,7 @@
};
};
fec@63fec000 {
ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";

45
arch/arm/boot/dts/imx53.dtsi
View File

@ -88,7 +88,7 @@
status = "disabled";
};
uart3: uart@5000c000 {
uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
@ -104,6 +104,15 @@
status = "disabled";
};
ssi2: ssi@50014000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
esdhc@50020000 { /* ESDHC3 */
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
@ -173,14 +182,14 @@
status = "disabled";
};
uart1: uart@53fbc000 {
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
uart2: uart@53fc0000 {
uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
@ -226,7 +235,7 @@
status = "disabled";
};
uart4: uart@53ff0000 {
uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
@ -241,7 +250,7 @@
reg = <0x60000000 0x10000000>;
ranges;
uart5: uart@63f90000 {
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
@ -290,7 +299,31 @@
status = "disabled";
};
fec@63fec000 {
ssi1: ssi@63fcc000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
audmux@63fd0000 {
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
ssi3: ssi@63fe8000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;

15
arch/arm/boot/dts/imx6q-arm2.dts
View File

@ -17,19 +17,14 @@
model = "Freescale i.MX6 Quad Armadillo2 Board";
compatible = "fsl,imx6q-arm2", "fsl,imx6q";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
};
memory {
reg = <0x10000000 0x80000000>;
};
soc {
aips-bus@02100000 { /* AIPS2 */
enet@02188000 {
ethernet@02188000 {
phy-mode = "rgmii";
local-mac-address = [00 04 9F 01 1B 61];
status = "okay";
};
@ -37,16 +32,20 @@
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_1>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
fsl,card-wired;
non-removable;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4_1>;
status = "okay";
};
uart4: uart@021f0000 {
uart4: serial@021f0000 {
status = "okay";
};
};

50
arch/arm/boot/dts/imx6q-sabrelite.dts
View File

@ -22,8 +22,30 @@
};
soc {
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
ecspi@02008000 { /* eCSPI1 */
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
status = "okay";
flash: m25p80@0 {
compatible = "sst,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
ssi1: ssi@02028000 {
fsl,mode = "i2s-slave";
status = "okay";
};
};
};
aips-bus@02100000 { /* AIPS2 */
enet@02188000 {
ethernet@02188000 {
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
@ -43,13 +65,23 @@
status = "okay";
};
uart2: uart@021e8000 {
audmux@021d8000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
};
uart2: serial@021e8000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2_1>;
};
i2c@021a0000 { /* I2C1 */
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
@ -80,4 +112,18 @@
regulator-always-on;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};

53
arch/arm/boot/dts/imx6q-sabresd.dts Normal file
View File

@ -0,0 +1,53 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx6q.dtsi"
/ {
model = "Freescale i.MX6Q SABRE Smart Device Board";
compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
memory {
reg = <0x10000000 0x40000000>;
};
soc {
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
uart1: serial@02020000 {
status = "okay";
};
};
};
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
phy-mode = "rgmii";
status = "okay";
};
usdhc@02194000 { /* uSDHC2 */
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
status = "okay";
};
};
};
};

171
arch/arm/boot/dts/imx6q.dtsi
View File

@ -165,7 +165,7 @@
status = "disabled";
};
uart1: uart@02020000 {
uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
@ -177,19 +177,31 @@
interrupts = <0 51 0x04>;
};
ssi@02028000 { /* SSI1 */
ssi1: ssi@02028000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
status = "disabled";
};
ssi@0202c000 { /* SSI2 */
ssi2: ssi@0202c000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
status = "disabled";
};
ssi@02030000 { /* SSI3 */
ssi3: ssi@02030000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
status = "disabled";
};
asrc@02034000 {
@ -346,6 +358,90 @@
compatible = "fsl,imx6q-anatop";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1375000>;
regulator-always-on;
anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
};
regulator-3p0@120 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
};
regulator-2p5@130 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2750000>;
regulator-always-on;
anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2000000>;
anatop-max-voltage = <2750000>;
};
regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <0>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
regulator-vddpu@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
regulator-vddsoc@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <18>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
};
usbphy@020c9000 { /* USBPHY1 */
@ -386,7 +482,62 @@
};
iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
/* shared pinctrl settings */
audmux {
pinctrl_audmux_1: audmux-1 {
fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
};
};
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */
};
};
serial2 {
pinctrl_serial2_1: serial2grp-1 {
fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */
};
};
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
};
};
usdhc4 {
pinctrl_usdhc4_1: usdhc4grp-1 {
fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
};
};
};
dcic@020e4000 { /* DCIC1 */
@ -422,7 +573,7 @@
reg = <0x0217c000 0x4000>;
};
enet@02188000 {
ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
@ -527,7 +678,9 @@
};
audmux@021d8000 {
compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
mipi@021dc000 { /* MIPI-CSI */
@ -543,28 +696,28 @@
interrupts = <0 18 0x04>;
};
uart2: uart@021e8000 {
uart2: serial@021e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
status = "disabled";
};
uart3: uart@021ec000 {
uart3: serial@021ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
status = "disabled";
};
uart4: uart@021f0000 {
uart4: serial@021f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
status = "disabled";
};
uart5: uart@021f4000 {
uart5: serial@021f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;

2
arch/arm/boot/dts/omap3-beagle.dts
View File

@ -57,7 +57,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
ti,bus-width = <8>;
bus-width = <8>;
};
&mmc2 {

4
arch/arm/boot/dts/omap4-panda.dts
View File

@ -70,7 +70,7 @@
&mmc1 {
vmmc-supply = <&vmmc>;
ti,bus-width = <8>;
bus-width = <8>;
};
&mmc2 {
@ -87,5 +87,5 @@
&mmc5 {
ti,non-removable;
ti,bus-width = <4>;
bus-width = <4>;
};

6
arch/arm/boot/dts/omap4-sdp.dts
View File

@ -137,12 +137,12 @@
&mmc1 {
vmmc-supply = <&vmmc>;
ti,bus-width = <8>;
bus-width = <8>;
};
&mmc2 {
vmmc-supply = <&vaux1>;
ti,bus-width = <8>;
bus-width = <8>;
ti,non-removable;
};
@ -155,6 +155,6 @@
};
&mmc5 {
ti,bus-width = <4>;
bus-width = <4>;
ti,non-removable;
};

292
arch/arm/boot/dts/spear1310-evb.dts Normal file
View File

@ -0,0 +1,292 @@
/*
* DTS file for SPEAr1310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear1310.dtsi"
/ {
model = "ST SPEAr1310 Evaluation Board";
compatible = "st,spear1310-evb", "st,spear1310";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
pinmux@e0700000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
i2c0-pmx {
st,pins = "i2c0_grp";
st,function = "i2c0";
};
i2s1 {
st,pins = "i2s1_grp";
st,function = "i2s1";
};
gpio {
st,pins = "arm_gpio_grp";
st,function = "arm_gpio";
};
eth {
st,pins = "gmii_grp";
st,function = "gmii";
};
ssp0 {
st,pins = "ssp0_grp";
st,function = "ssp0";
};
kbd {
st,pins = "keyboard_6x6_grp";
st,function = "keyboard";
};
sdhci {
st,pins = "sdhci_grp";
st,function = "sdhci";
};
smi-pmx {
st,pins = "smi_2_chips_grp";
st,function = "smi";
};
uart0 {
st,pins = "uart0_grp";
st,function = "uart0";
};
rs485 {
st,pins = "rs485_0_1_tdm_0_1_grp";
st,function = "rs485_0_1_tdm_0_1";
};
i2c1_2 {
st,pins = "i2c_1_2_grp";
st,function = "i2c_1_2";
};
pci {
st,pins = "pcie0_grp","pcie1_grp",
"pcie2_grp";
st,function = "pci";
};
smii {
st,pins = "smii_0_1_2_grp";
st,function = "smii_0_1_2";
};
nand {
st,pins = "nand_8bit_grp",
"nand_16bit_grp";
st,function = "nand";
};
};
};
ahci@b1000000 {
status = "okay";
};
cf@b2800000 {
status = "okay";
};
dma@ea800000 {
status = "okay";
};
dma@eb000000 {
status = "okay";
};
fsmc: flash@b0000000 {
status = "okay";
};
gmac0: eth@e2000000 {
status = "okay";
};
sdhci@b3000000 {
status = "okay";
};
smi: flash@ea000000 {
status = "okay";
clock-rate=<50000000>;
flash@e6000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe6000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
spi0: spi@e0100000 {
status = "okay";
};
ehci@e4800000 {
status = "okay";
};
ehci@e5800000 {
status = "okay";
};
ohci@e4000000 {
status = "okay";
};
ohci@e5000000 {
status = "okay";
};
apb {
adc@e0080000 {
status = "okay";
};
gpio0: gpio@e0600000 {
status = "okay";
};
gpio1: gpio@e0680000 {
status = "okay";
};
i2c0: i2c@e0280000 {
status = "okay";
};
i2c1: i2c@5cd00000 {
status = "okay";
};
kbd@e0300000 {
linux,keymap = < 0x00000001
0x00010002
0x00020003
0x00030004
0x00040005
0x00050006
0x00060007
0x00070008
0x00080009
0x0100000a
0x0101000c
0x0102000d
0x0103000e
0x0104000f
0x01050010
0x01060011
0x01070012
0x01080013
0x02000014
0x02010015
0x02020016
0x02030017
0x02040018
0x02050019
0x0206001a
0x0207001b
0x0208001c
0x0300001d
0x0301001e
0x0302001f
0x03030020
0x03040021
0x03050022
0x03060023
0x03070024
0x03080025
0x04000026
0x04010027
0x04020028
0x04030029
0x0404002a
0x0405002b
0x0406002c
0x0407002d
0x0408002e
0x0500002f
0x05010030
0x05020031
0x05030032
0x05040033
0x05050034
0x05060035
0x05070036
0x05080037
0x06000038
0x06010039
0x0602003a
0x0603003b
0x0604003c
0x0605003d
0x0606003e
0x0607003f
0x06080040
0x07000041
0x07010042
0x07020043
0x07030044
0x07040045
0x07050046
0x07060047
0x07070048
0x07080049
0x0800004a
0x0801004b
0x0802004c
0x0803004d
0x0804004e
0x0805004f
0x08060050
0x08070051
0x08080052 >;
autorepeat;
st,mode = <0>;
status = "okay";
};
rtc@e0580000 {
status = "okay";
};
serial@e0000000 {
status = "okay";
};
wdt@ec800620 {
status = "okay";
};
};
};
};

184
arch/arm/boot/dts/spear1310.dtsi Normal file
View File

@ -0,0 +1,184 @@
/*
* DTS file for all SPEAr1310 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear13xx.dtsi"
/ {
compatible = "st,spear1310";
ahb {
ahci@b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 68 0x4>;
status = "disabled";
};
ahci@b1800000 {
compatible = "snps,spear-ahci";
reg = <0xb1800000 0x10000>;
interrupts = <0 69 0x4>;
status = "disabled";
};
ahci@b4000000 {
compatible = "snps,spear-ahci";
reg = <0xb4000000 0x10000>;
interrupts = <0 70 0x4>;
status = "disabled";
};
gmac1: eth@5c400000 {
compatible = "st,spear600-gmac";
reg = <0x5c400000 0x8000>;
interrupts = <0 95 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
gmac2: eth@5c500000 {
compatible = "st,spear600-gmac";
reg = <0x5c500000 0x8000>;
interrupts = <0 96 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
gmac3: eth@5c600000 {
compatible = "st,spear600-gmac";
reg = <0x5c600000 0x8000>;
interrupts = <0 97 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
gmac4: eth@5c700000 {
compatible = "st,spear600-gmac";
reg = <0x5c700000 0x8000>;
interrupts = <0 98 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
apb {
i2c1: i2c@5cd00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5cd00000 0x1000>;
interrupts = <0 87 0x4>;
status = "disabled";
};
i2c2: i2c@5ce00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5ce00000 0x1000>;
interrupts = <0 88 0x4>;
status = "disabled";
};
i2c3: i2c@5cf00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5cf00000 0x1000>;
interrupts = <0 89 0x4>;
status = "disabled";
};
i2c4: i2c@5d000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d000000 0x1000>;
interrupts = <0 90 0x4>;
status = "disabled";
};
i2c5: i2c@5d100000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d100000 0x1000>;
interrupts = <0 91 0x4>;
status = "disabled";
};
i2c6: i2c@5d200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d200000 0x1000>;
interrupts = <0 92 0x4>;
status = "disabled";
};
i2c7: i2c@5d300000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d300000 0x1000>;
interrupts = <0 93 0x4>;
status = "disabled";
};
serial@5c800000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5c800000 0x1000>;
interrupts = <0 82 0x4>;
status = "disabled";
};
serial@5c900000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5c900000 0x1000>;
interrupts = <0 83 0x4>;
status = "disabled";
};
serial@5ca00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5ca00000 0x1000>;
interrupts = <0 84 0x4>;
status = "disabled";
};
serial@5cb00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5cb00000 0x1000>;
interrupts = <0 85 0x4>;
status = "disabled";
};
serial@5cc00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5cc00000 0x1000>;
interrupts = <0 86 0x4>;
status = "disabled";
};
thermal@e07008c4 {
st,thermal-flags = <0x7000>;
};
};
};
};

308
arch/arm/boot/dts/spear1340-evb.dts Normal file
View File

@ -0,0 +1,308 @@
/*
* DTS file for SPEAr1340 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear1340.dtsi"
/ {
model = "ST SPEAr1340 Evaluation Board";
compatible = "st,spear1340-evb", "st,spear1340";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
pinmux@e0700000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pads_as_gpio {
st,pins = "pads_as_gpio_grp";
st,function = "pads_as_gpio";
};
fsmc {
st,pins = "fsmc_8bit_grp";
st,function = "fsmc";
};
kbd {
st,pins = "keyboard_row_col_grp",
"keyboard_col5_grp";
st,function = "keyboard";
};
uart0 {
st,pins = "uart0_grp", "uart0_enh_grp";
st,function = "uart0";
};
i2c0-pmx {
st,pins = "i2c0_grp";
st,function = "i2c0";
};
i2c1-pmx {
st,pins = "i2c1_grp";
st,function = "i2c1";
};
spdif-in {
st,pins = "spdif_in_grp";
st,function = "spdif_in";
};
spdif-out {
st,pins = "spdif_out_grp";
st,function = "spdif_out";
};
ssp0 {
st,pins = "ssp0_grp", "ssp0_cs1_grp",
"ssp0_cs3_grp";
st,function = "ssp0";
};
pwm {
st,pins = "pwm2_grp", "pwm3_grp";
st,function = "pwm";
};
smi-pmx {
st,pins = "smi_grp";
st,function = "smi";
};
i2s {
st,pins = "i2s_in_grp", "i2s_out_grp";
st,function = "i2s";
};
gmac {
st,pins = "gmii_grp", "rgmii_grp";
st,function = "gmac";
};
cam3 {
st,pins = "cam3_grp";
st,function = "cam3";
};
cec0 {
st,pins = "cec0_grp";
st,function = "cec0";
};
cec1 {
st,pins = "cec1_grp";
st,function = "cec1";
};
sdhci {
st,pins = "sdhci_grp";
st,function = "sdhci";
};
clcd {
st,pins = "clcd_grp";
st,function = "clcd";
};
sata {
st,pins = "sata_grp";
st,function = "sata";
};
};
};
dma@ea800000 {
status = "okay";
};
dma@eb000000 {
status = "okay";
};
fsmc: flash@b0000000 {
status = "okay";
};
gmac0: eth@e2000000 {
status = "okay";
};
sdhci@b3000000 {
status = "okay";
};
smi: flash@ea000000 {
status = "okay";
clock-rate=<50000000>;
flash@e6000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe6000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
spi0: spi@e0100000 {
status = "okay";
};
ehci@e4800000 {
status = "okay";
};
ehci@e5800000 {
status = "okay";
};
ohci@e4000000 {
status = "okay";
};
ohci@e5000000 {
status = "okay";
};
apb {
adc@e0080000 {
status = "okay";
};
gpio0: gpio@e0600000 {
status = "okay";
};
gpio1: gpio@e0680000 {
status = "okay";
};
i2c0: i2c@e0280000 {
status = "okay";
};
i2c1: i2c@b4000000 {
status = "okay";
};
kbd@e0300000 {
linux,keymap = < 0x00000001
0x00010002
0x00020003
0x00030004
0x00040005
0x00050006
0x00060007
0x00070008
0x00080009
0x0100000a
0x0101000c
0x0102000d
0x0103000e
0x0104000f
0x01050010
0x01060011
0x01070012
0x01080013
0x02000014
0x02010015
0x02020016
0x02030017
0x02040018
0x02050019
0x0206001a
0x0207001b
0x0208001c
0x0300001d
0x0301001e
0x0302001f
0x03030020
0x03040021
0x03050022
0x03060023
0x03070024
0x03080025
0x04000026
0x04010027
0x04020028
0x04030029
0x0404002a
0x0405002b
0x0406002c
0x0407002d
0x0408002e
0x0500002f
0x05010030
0x05020031
0x05030032
0x05040033
0x05050034
0x05060035
0x05070036
0x05080037
0x06000038
0x06010039
0x0602003a
0x0603003b
0x0604003c
0x0605003d
0x0606003e
0x0607003f
0x06080040
0x07000041
0x07010042
0x07020043
0x07030044
0x07040045
0x07050046
0x07060047
0x07070048
0x07080049
0x0800004a
0x0801004b
0x0802004c
0x0803004d
0x0804004e
0x0805004f
0x08060050
0x08070051
0x08080052 >;
autorepeat;
st,mode = <0>;
status = "okay";
};
rtc@e0580000 {
status = "okay";
};
serial@e0000000 {
status = "okay";
};
serial@b4100000 {
status = "okay";
};
wdt@ec800620 {
status = "okay";
};
};
};
};

56
arch/arm/boot/dts/spear1340.dtsi Normal file
View File

@ -0,0 +1,56 @@
/*
* DTS file for all SPEAr1340 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear13xx.dtsi"
/ {
compatible = "st,spear1340";
ahb {
ahci@b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 72 0x4>;
status = "disabled";
};
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
apb {
i2c1: i2c@b4000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xb4000000 0x1000>;
interrupts = <0 104 0x4>;
status = "disabled";
};
serial@b4100000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
};
thermal@e07008c4 {
st,thermal-flags = <0x2a00>;
};
};
};
};

262
arch/arm/boot/dts/spear13xx.dtsi Normal file
View File

@ -0,0 +1,262 @@
/*
* DTS file for all SPEAr13xx SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
};
gic: interrupt-controller@ec801000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0xec801000 0x1000 >,
< 0xec800100 0x0100 >;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 8 0x04
0 9 0x04>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xed000000 0x1000>;
cache-unified;
cache-level = <2>;
};
memory {
name = "memory";
device_type = "memory";
reg = <0 0x40000000>;
};
chosen {
bootargs = "console=ttyAMA0,115200";
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000
0xe0000000 0xe0000000 0x10000000>;
sdhci@b3000000 {
compatible = "st,sdhci-spear";
reg = <0xb3000000 0x100>;
interrupts = <0 28 0x4>;
status = "disabled";
};
cf@b2800000 {
compatible = "arasan,cf-spear1340";
reg = <0xb2800000 0x100>;
interrupts = <0 29 0x4>;
status = "disabled";
};
dma@ea800000 {
compatible = "snps,dma-spear1340";
reg = <0xea800000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
};
dma@eb000000 {
compatible = "snps,dma-spear1340";
reg = <0xeb000000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
fsmc: flash@b0000000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb0000000 0x1000 /* FSMC Register */
0xb0800000 0x0010>; /* NAND Base */
reg-names = "fsmc_regs", "nand_data";
interrupts = <0 20 0x4
0 21 0x4
0 22 0x4
0 23 0x4>;
st,ale-off = <0x20000>;
st,cle-off = <0x10000>;
status = "disabled";
};
gmac0: eth@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
interrupts = <0 23 0x4
0 24 0x4>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
smi: flash@ea000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xea000000 0x1000>;
interrupts = <0 30 0x4>;
status = "disabled";
};
spi0: spi@e0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xe0100000 0x1000>;
interrupts = <0 31 0x4>;
status = "disabled";
};
ehci@e4800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe4800000 0x1000>;
interrupts = <0 64 0x4>;
status = "disabled";
};
ehci@e5800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe5800000 0x1000>;
interrupts = <0 66 0x4>;
status = "disabled";
};
ohci@e4000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe4000000 0x1000>;
interrupts = <0 65 0x4>;
status = "disabled";
};
ohci@e5000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe5000000 0x1000>;
interrupts = <0 67 0x4>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000
0xe0000000 0xe0000000 0x10000000>;
gpio0: gpio@e0600000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xe0600000 0x1000>;
interrupts = <0 24 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio1: gpio@e0680000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xe0680000 0x1000>;
interrupts = <0 25 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
kbd@e0300000 {
compatible = "st,spear300-kbd";
reg = <0xe0300000 0x1000>;
status = "disabled";
};
i2c0: i2c@e0280000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xe0280000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
rtc@e0580000 {
compatible = "st,spear-rtc";
reg = <0xe0580000 0x1000>;
interrupts = <0 36 0x4>;
status = "disabled";
};
serial@e0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
interrupts = <0 36 0x4>;
status = "disabled";
};
adc@e0080000 {
compatible = "st,spear600-adc";
reg = <0xe0080000 0x1000>;
interrupts = <0 44 0x4>;
status = "disabled";
};
timer@e0380000 {
compatible = "st,spear-timer";
reg = <0xe0380000 0x400>;
interrupts = <0 37 0x4>;
};
timer@ec800600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xec800600 0x20>;
interrupts = <1 13 0x301>;
};
wdt@ec800620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xec800620 0x20>;
status = "disabled";
};
thermal@e07008c4 {
compatible = "st,thermal-spear1340";
reg = <0xe07008c4 0x4>;
};
};
};
};

25
arch/arm/boot/dts/spear300-evb.dts
View File

@ -87,6 +87,31 @@
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
flash@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
spi0: spi@d0100000 {

20
arch/arm/boot/dts/spear310-evb.dts
View File

@ -103,11 +103,27 @@
clock-rate=<50000000>;
flash@f8000000 {
label = "m25p64";
reg = <0xf8000000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};

25
arch/arm/boot/dts/spear320-evb.dts
View File

@ -110,6 +110,31 @@
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
flash@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
spi0: spi@d0100000 {

6
arch/arm/boot/dts/spear3xx.dtsi
View File

@ -139,6 +139,12 @@
interrupts = <12>;
status = "disabled";
};
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
interrupts = <2>;
};
};
};
};

29
arch/arm/boot/dts/spear600-evb.dts
View File

@ -33,6 +33,35 @@
status = "okay";
};
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
flash@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
apb {
serial@d0000000 {
status = "okay";

6
arch/arm/boot/dts/spear600.dtsi
View File

@ -177,6 +177,12 @@
interrupts = <28>;
status = "disabled";
};
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
interrupts = <16>;
};
};
};
};

114
arch/arm/boot/dts/tegra-cardhu.dts
View File

@ -7,10 +7,10 @@
compatible = "nvidia,cardhu", "nvidia,tegra30";
memory {
reg = < 0x80000000 0x40000000 >;
reg = <0x80000000 0x40000000>;
};
pinmux@70000000 {
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@ -51,64 +51,122 @@
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
dap2_fs_pa2 {
nvidia,pins = "dap2_fs_pa2",
"dap2_sclk_pa3",
"dap2_din_pa4",
"dap2_dout_pa5";
nvidia,function = "i2s1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
};
};
serial@70006000 {
clock-frequency = < 408000000 >;
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "disable";
};
serial@70006300 {
status = "disable";
};
serial@70006400 {
status = "disable";
status = "okay";
clock-frequency = <408000000>;
};
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <100000>;
/* ALS and Proximity sensor */
isl29028@44 {
compatible = "isil,isl29028";
reg = <0x44>;
interrupt-parent = <&gpio>;
interrupts = <88 0x04>; /*gpio PL0 */
};
};
i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = <179 0x04>; /* gpio PW3 */
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
};
ahub {
i2s@70080400 {
status = "okay";
};
};
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
};
sdhci@78000200 {
status = "disable";
};
sdhci@78000400 {
status = "disable";
};
sdhci@78000400 {
sdhci@78000600 {
status = "okay";
support-8bit;
bus-width = <8>;
};
sound {
compatible = "nvidia,tegra-audio-wm8903-cardhu",
"nvidia,tegra-audio-wm8903";
nvidia,model = "NVIDIA Tegra Cardhu";
nvidia,audio-routing =
"Headphone Jack", "HPOUTR",
"Headphone Jack", "HPOUTL",
"Int Spk", "ROP",
"Int Spk", "RON",
"Int Spk", "LOP",
"Int Spk", "LON",
"Mic Jack", "MICBIAS",
"IN1L", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
};
};

118
arch/arm/boot/dts/tegra-harmony.dts
View File

@ -6,11 +6,11 @@
model = "NVIDIA Tegra2 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
memory@0 {
reg = < 0x00000000 0x40000000 >;
memory {
reg = <0x00000000 0x40000000>;
};
pinmux@70000000 {
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@ -167,28 +167,28 @@
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
"cdev1", "dap1", "dtb", "gma", "gmb",
"gmc", "gmd", "gme", "gpu7", "gpv",
"i2cp", "pta", "rm", "slxa", "slxk",
"spia", "spib";
"cdev1", "cdev2", "dap1", "dtb", "gma",
"gmb", "gmc", "gmd", "gme", "gpu7",
"gpv", "i2cp", "pta", "rm", "slxa",
"slxk", "spia", "spib", "uac";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_cdev2 {
nvidia,pins = "cdev2", "csus", "spid", "spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
conf_csus {
nvidia,pins = "csus", "spid", "spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
"dtc", "dte", "dtf", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
"uac", "uda";
"uda";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
@ -234,42 +234,81 @@
};
};
pmc@7000f400 {
nvidia,invert-interrupt;
i2s@70002800 {
status = "okay";
};
serial@70006300 {
status = "okay";
clock-frequency = <216000000>;
};
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = < 187 0x04 >;
interrupts = <187 0x04>;
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
};
i2c@7000c400 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
};
i2s@70002a00 {
status = "disable";
pmc {
nvidia,invert-interrupt;
};
usb@c5000000 {
status = "okay";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
usb@c5008000 {
status = "okay";
};
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
support-8bit;
bus-width = <8>;
};
sound {
@ -295,45 +334,4 @@
nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
};
serial@70006000 {
status = "disable";
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "disable";
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
serial@70006400 {
status = "disable";
};
sdhci@c8000000 {
status = "disable";
};
sdhci@c8000200 {
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
};
sdhci@c8000400 {
status = "disable";
};
sdhci@c8000600 {
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
support-8bit;
};
};

Some files were not shown because too many files have changed in this diff Show More