forked from Minki/linux
powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale
This patch adds support for MPC8308RDB development board from
Freescale.
Supported devices:
DUART
Dual Ethernet
NOR and NAND flashes
I2C
USB in peripheral mode
PCIE support is broken by the commit 3da34aa ("powerpc/fsl: Support
unique MSI addresses per PCIe Root Complex"). Works after revert.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Ilya Yanok
Kumar Gala
parent
e3b5e0d552
commit
ba4d1275d1
303
arch/powerpc/boot/dts/mpc8308rdb.dts
Normal file
303
arch/powerpc/boot/dts/mpc8308rdb.dts
Normal file
@ -0,0 +1,303 @@
|
||||
/*
|
||||
* MPC8308RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2009 Freescale Semiconductor Inc.
|
||||
* Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
compatible = "fsl,mpc8308rdb";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8308@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <16384>;
|
||||
i-cache-size = <16384>;
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x08000000>; // 128MB at 0
|
||||
};
|
||||
|
||||
localbus@e0005000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
|
||||
reg = <0xe0005000 0x1000>;
|
||||
interrupts = <77 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
|
||||
// CS0 and CS1 are swapped when
|
||||
// booting from nand, but the
|
||||
// addresses are the same.
|
||||
ranges = <0x0 0x0 0xfe000000 0x00800000
|
||||
0x1 0x0 0xe0600000 0x00002000
|
||||
0x2 0x0 0xf0000000 0x00020000
|
||||
0x3 0x0 0xfa000000 0x00008000>;
|
||||
|
||||
flash@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x800000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
u-boot@0 {
|
||||
reg = <0x0 0x60000>;
|
||||
read-only;
|
||||
};
|
||||
env@60000 {
|
||||
reg = <0x60000 0x10000>;
|
||||
};
|
||||
env1@70000 {
|
||||
reg = <0x70000 0x10000>;
|
||||
};
|
||||
kernel@80000 {
|
||||
reg = <0x80000 0x200000>;
|
||||
};
|
||||
dtb@280000 {
|
||||
reg = <0x280000 0x10000>;
|
||||
};
|
||||
ramdisk@290000 {
|
||||
reg = <0x290000 0x570000>;
|
||||
};
|
||||
};
|
||||
|
||||
nand@1,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8315-fcm-nand",
|
||||
"fsl,elbc-fcm-nand";
|
||||
reg = <0x1 0x0 0x2000>;
|
||||
|
||||
jffs2@0 {
|
||||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
immr@e0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8315-immr", "simple-bus";
|
||||
ranges = <0 0xe0000000 0x00100000>;
|
||||
reg = <0xe0000000 0x00000200>;
|
||||
bus-frequency = <0>;
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <14 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
dfsrr;
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@23000 {
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x23000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <38 0x8>;
|
||||
dr_mode = "peripheral";
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x24000 0x1000>;
|
||||
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <32 0x8 33 0x8 34 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
tbi-handle = < &tbi0 >;
|
||||
phy-handle = < &phy2 >;
|
||||
fsl,magic-packet;
|
||||
|
||||
mdio@520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x520 0x20>;
|
||||
phy2: ethernet-phy@2 {
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <17 0x8>;
|
||||
reg = <0x2>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x25000 0x1000>;
|
||||
ranges = <0x0 0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <35 0x8 36 0x8 37 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
tbi-handle = < &tbi1 >;
|
||||
/* Vitesse 7385 isn't on the MDIO bus */
|
||||
fixed-link = <1 1 1000 0 0>;
|
||||
fsl,magic-packet;
|
||||
|
||||
mdio@520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x520 0x20>;
|
||||
|
||||
tbi1: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <133333333>;
|
||||
interrupts = <9 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <133333333>;
|
||||
interrupts = <10 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
};
|
||||
|
||||
gpio@c00 {
|
||||
#gpio-cells = <2>;
|
||||
device_type = "gpio";
|
||||
compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
|
||||
reg = <0xc00 0x18>;
|
||||
interrupts = <74 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
/* IPIC
|
||||
* interrupts cell = <intr #, sense>
|
||||
* sense values match linux IORESOURCE_IRQ_* defines:
|
||||
* sense == 8: Level, low assertion
|
||||
* sense == 2: Edge, high-to-low change
|
||||
*/
|
||||
ipic: interrupt-controller@700 {
|
||||
compatible = "fsl,ipic";
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x700 0x100>;
|
||||
device_type = "ipic";
|
||||
};
|
||||
|
||||
ipic-msi@7c0 {
|
||||
compatible = "fsl,ipic-msi";
|
||||
reg = <0x7c0 0x40>;
|
||||
msi-available-ranges = <0x0 0x100>;
|
||||
interrupts = < 0x43 0x8
|
||||
0x4 0x8
|
||||
0x51 0x8
|
||||
0x52 0x8
|
||||
0x56 0x8
|
||||
0x57 0x8
|
||||
0x58 0x8
|
||||
0x59 0x8 >;
|
||||
interrupt-parent = < &ipic >;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pci0: pcie@e0009000 {
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
|
||||
reg = <0xe0009000 0x00001000
|
||||
0xb0000000 0x01000000>;
|
||||
ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
|
||||
bus-range = <0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0 0 0 1 &ipic 1 8
|
||||
0 0 0 2 &ipic 1 8
|
||||
0 0 0 3 &ipic 1 8
|
||||
0 0 0 4 &ipic 1 8>;
|
||||
interrupts = <0x1 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
clock-frequency = <0>;
|
||||
|
||||
pcie@0 {
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
reg = <0 0 0 0 0>;
|
||||
ranges = <0x02000000 0 0xa0000000
|
||||
0x02000000 0 0xa0000000
|
||||
0 0x10000000
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -9,6 +9,14 @@ menuconfig PPC_83xx
|
||||
|
||||
if PPC_83xx
|
||||
|
||||
config MPC830x_RDB
|
||||
bool "Freescale MPC830x RDB"
|
||||
select DEFAULT_UIMAGE
|
||||
select PPC_MPC831x
|
||||
select FSL_GTM
|
||||
help
|
||||
This option enables support for the MPC8308 RDB board.
|
||||
|
||||
config MPC831x_RDB
|
||||
bool "Freescale MPC831x RDB"
|
||||
select DEFAULT_UIMAGE
|
||||
|
||||
@ -4,6 +4,7 @@
|
||||
obj-y := misc.o usb.o
|
||||
obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o
|
||||
obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
|
||||
obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
|
||||
obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
|
||||
obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
|
||||
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
|
||||
|
||||
94
arch/powerpc/platforms/83xx/mpc830x_rdb.c
Normal file
94
arch/powerpc/platforms/83xx/mpc830x_rdb.c
Normal file
@ -0,0 +1,94 @@
|
||||
/*
|
||||
* arch/powerpc/platforms/83xx/mpc830x_rdb.c
|
||||
*
|
||||
* Description: MPC830x RDB board specific routines.
|
||||
* This file is based on mpc831x_rdb.c
|
||||
*
|
||||
* Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved.
|
||||
* Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/ipic.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include "mpc83xx.h"
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init mpc830x_rdb_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
|
||||
mpc83xx_add_bridge(np);
|
||||
#endif
|
||||
mpc831x_usb_cfg();
|
||||
}
|
||||
|
||||
static void __init mpc830x_rdb_init_IRQ(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
np = of_find_node_by_type(NULL, "ipic");
|
||||
if (!np)
|
||||
return;
|
||||
|
||||
ipic_init(np, 0);
|
||||
|
||||
/* Initialize the default interrupt mapping priorities,
|
||||
* in case the boot rom changed something on us.
|
||||
*/
|
||||
ipic_set_default_priority();
|
||||
}
|
||||
|
||||
/*
|
||||
* Called very early, MMU is off, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init mpc830x_rdb_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
return of_flat_dt_is_compatible(root, "MPC8308RDB") ||
|
||||
of_flat_dt_is_compatible(root, "fsl,mpc8308rdb");
|
||||
}
|
||||
|
||||
static struct of_device_id __initdata of_bus_ids[] = {
|
||||
{ .compatible = "simple-bus" },
|
||||
{ .compatible = "gianfar" },
|
||||
{},
|
||||
};
|
||||
|
||||
static int __init declare_of_platform_devices(void)
|
||||
{
|
||||
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
|
||||
|
||||
define_machine(mpc830x_rdb) {
|
||||
.name = "MPC830x RDB",
|
||||
.probe = mpc830x_rdb_probe,
|
||||
.setup_arch = mpc830x_rdb_setup_arch,
|
||||
.init_IRQ = mpc830x_rdb_init_IRQ,
|
||||
.get_irq = ipic_get_irq,
|
||||
.restart = mpc83xx_restart,
|
||||
.time_init = mpc83xx_time_init,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user