Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/doc

Pull documentation updates from Jiri Kosina:
 "Updates to kernel documentation.

  I took this over (hopefully temporarily) from Randy who was not
  willing to maintain it any longer.  This pile mostly is a relay of
  queue that Randy already had in his tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/doc:
  Documentation: fix broken v4l-utils URL
  Documentation: update include path for mpssd
  Documentation: correct parameter error for dma_mapping_error
  MAINTAINERS: update location of linux-doc tree
  Documentation: remove networking/.gitignore
  tools: add more endian.h macros
  Make Documenation depend on headers_install
  Docs: this_cpu_ops: remove redundant add forms
  Documentation: disable vdso_test to avoid breakage with old glibc
  Documentation: update vDSO makefile to build portable examples
  Documentation: update .gitignore files
  Documentation: support glibc versions without htole macros
  v4l2-pci-skeleton: Only build if PCI is available
  Documentation: fix misc. warnings
  Documentation: make functions static to avoid prototype warnings
  Documentation: add makefiles for more targets
  Documentation: use subdir-y to avoid unnecessary built-in.o files

Documentation/.gitignore

@@ -1,7 +0,0 @@
-filesystems/dnotify_test
-laptops/dslm
-timers/hpet_example
-vm/hugepage-mmap
-vm/hugepage-shm
-vm/map_hugetlb
-

Documentation/DMA-API-HOWTO.txt

@@ -531,7 +531,7 @@ To map a single region, you do:
 	size_t size = buffer->len;
 
 	dma_handle = dma_map_single(dev, addr, size, direction);
-	if (dma_mapping_error(dma_handle)) {
+	if (dma_mapping_error(dev, dma_handle)) {
 		/*
 		 * reduce current DMA mapping usage,
 		 * delay and try again later or
@@ -588,7 +588,7 @@ Specifically:
 	size_t size = buffer->len;
 
 	dma_handle = dma_map_page(dev, page, offset, size, direction);
-	if (dma_mapping_error(dma_handle)) {
+	if (dma_mapping_error(dev, dma_handle)) {
 		/*
 		 * reduce current DMA mapping usage,
 		 * delay and try again later or
@@ -689,7 +689,7 @@ to use the dma_sync_*() interfaces.
 		dma_addr_t mapping;
 
 		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
-		if (dma_mapping_error(dma_handle)) {
+		if (dma_mapping_error(cp->dev, dma_handle)) {
 			/*
 			 * reduce current DMA mapping usage,
 			 * delay and try again later or

Documentation/DocBook/media/v4l/common.xml

@@ -110,7 +110,7 @@ makes no provisions to find these related devices. Some really
 complex devices use the Media Controller (see <xref linkend="media_controller" />)
 which can be used for this purpose. But most drivers do not use it,
 and while some code exists that uses sysfs to discover related devices
-(see libmedia_dev in the <ulink url="http://git.linuxtv.org/v4l-utils/">v4l-utils</ulink>
+(see libmedia_dev in the <ulink url="http://git.linuxtv.org/cgit.cgi/v4l-utils.git/">v4l-utils</ulink>
 git repository), there is no library yet that can provide a single API towards
 both Media Controller-based devices and devices that do not use the Media Controller.
 If you want to work on this please write to the linux-media mailing list: &v4l-ml;.</para>

Documentation/Makefile

@@ -1,3 +1,4 @@
-obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
+subdir-y := accounting arm auxdisplay blackfin connector \
-	filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
+	filesystems filesystems ia64 laptops mic misc-devices \
-	pcmcia/ spi/ timers/ watchdog/src/ misc-devices/mei/
+	networking pcmcia prctl ptp spi timers vDSO video4linux \
+	watchdog

Documentation/accounting/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-y := getdelays
 

Documentation/arm/Makefile

@@ -0,0 +1 @@
+subdir-y := SH-Mobile

Documentation/arm/SH-Mobile/.gitignore

@@ -0,0 +1 @@
+vrl4

Documentation/arm/SH-Mobile/Makefile

@@ -1,8 +1,7 @@
-BIN := vrl4
+# List of programs to build
+hostprogs-y := vrl4
 
-.PHONY: all
+# Tell kbuild to always build the programs
-all: $(BIN)
+always := $(hostprogs-y)
 
-.PHONY: clean
+HOSTCFLAGS_vrl4.o += -I$(objtree)/usr/include -I$(srctree)/tools/include
-clean:
-	rm -f *.o $(BIN)

Documentation/arm/SH-Mobile/vrl4.c

@@ -34,6 +34,7 @@
 #include <stdint.h>
 #include <stdio.h>
 #include <errno.h>
+#include <tools/endian.h>
 
 struct hdr {
 	uint32_t magic1;
@@ -77,7 +78,7 @@ struct hdr {
 
 #define ROUND_UP(x)	((x + ALIGN - 1) & ~(ALIGN - 1))
 
-ssize_t do_read(int fd, void *buf, size_t count)
+static ssize_t do_read(int fd, void *buf, size_t count)
 {
 	size_t offset = 0;
 	ssize_t l;
@@ -98,7 +99,7 @@ ssize_t do_read(int fd, void *buf, size_t count)
 	return offset;
 }
 
-ssize_t do_write(int fd, const void *buf, size_t count)
+static ssize_t do_write(int fd, const void *buf, size_t count)
 {
 	size_t offset = 0;
 	ssize_t l;
@@ -117,7 +118,7 @@ ssize_t do_write(int fd, const void *buf, size_t count)
 	return offset;
 }
 
-ssize_t write_zero(int fd, size_t len)
+static ssize_t write_zero(int fd, size_t len)
 {
 	size_t i = len;
 

Documentation/auxdisplay/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-y := cfag12864b-example
 

Documentation/blackfin/Makefile

@@ -1,6 +1,3 @@
+ifneq ($(CONFIG_BLACKFIN),)
 obj-m := gptimers-example.o
-
+endif
-all: modules
-
-modules clean:
-	$(MAKE) -C ../.. SUBDIRS=$(PWD) $@

Documentation/filesystems/.gitignore

@@ -0,0 +1 @@
+dnotify_test

Documentation/filesystems/Makefile

@@ -1,5 +1,4 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
+subdir-y := configfs
-obj- := dummy.o
 
 # List of programs to build
 hostprogs-y := dnotify_test

Documentation/ia64/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-y := aliasing-test
 

Documentation/laptops/.gitignore

@@ -0,0 +1,2 @@
+dslm
+freefall

Documentation/laptops/Makefile

@@ -1,8 +1,5 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
-hostprogs-y := dslm
+hostprogs-y := dslm freefall
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)

Documentation/mic/Makefile

@@ -0,0 +1 @@
+subdir-y := mpssd

Documentation/mic/mpssd/Makefile

@@ -1,19 +1,19 @@
-#
+# List of programs to build
-# Makefile - Intel MIC User Space Tools.
+hostprogs-y := mpssd
-# Copyright(c) 2013, Intel Corporation.
+
-#
+mpssd-objs := mpssd.o sysfs.o
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS += -I$(objtree)/usr/include -I$(srctree)/tools/include
+
 ifdef DEBUG
-CFLAGS += $(USERWARNFLAGS) -I. -g -Wall -DDEBUG=$(DEBUG)
+HOSTCFLAGS += -DDEBUG=$(DEBUG)
-else
-CFLAGS += $(USERWARNFLAGS) -I. -g -Wall
 endif
 
-mpssd: mpssd.o sysfs.o
+HOSTLOADLIBES_mpssd := -lpthread
-	$(CC) $(CFLAGS) -o $@ $^ -lpthread
 
 install:
 	install mpssd /usr/sbin/mpssd
 	install micctrl /usr/sbin/micctrl
-
-clean:
-	rm -f mpssd *.o

Documentation/mic/mpssd/mpssd.c

@@ -41,6 +41,7 @@
 #include "mpssd.h"
 #include <linux/mic_ioctl.h>
 #include <linux/mic_common.h>
+#include <tools/endian.h>
 
 static void init_mic(struct mic_info *mic);
 
@@ -1476,9 +1477,9 @@ set_cmdline(struct mic_info *mic)
 
 	len = snprintf(buffer, PATH_MAX,
 		"clocksource=tsc highres=off nohz=off ");
-	len += snprintf(buffer + len, PATH_MAX,
+	len += snprintf(buffer + len, PATH_MAX - len,
 		"cpufreq_on;corec6_off;pc3_off;pc6_off ");
-	len += snprintf(buffer + len, PATH_MAX,
+	len += snprintf(buffer + len, PATH_MAX - len,
 		"ifcfg=static;address,172.31.%d.1;netmask,255.255.255.0",
 		mic->id);
 

Documentation/misc-devices/Makefile

@@ -0,0 +1 @@
+subdir-y := mei

Documentation/misc-devices/mei/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-y := mei-amt-version
 HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include

Documentation/networking/Makefile

@@ -1,7 +1 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
+subdir-y := timestamping
-obj- := dummy.o
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-obj-m := timestamping/

Documentation/networking/timestamping/.gitignore

@@ -1,2 +1,3 @@
 timestamping
+txtimestamp
 hwtstamp_config

Documentation/networking/timestamping/Makefile

@@ -1,14 +1,8 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
-hostprogs-y := timestamping hwtstamp_config
+hostprogs-y := hwtstamp_config timestamping
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 
 HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include
 HOSTCFLAGS_hwtstamp_config.o += -I$(objtree)/usr/include
-
-clean:
-	rm -f timestamping hwtstamp_config

Documentation/pcmcia/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-y := crc32hash
 

Documentation/prctl/.gitignore

@@ -0,0 +1,3 @@
+disable-tsc-ctxt-sw-stress-test
+disable-tsc-on-off-stress-test
+disable-tsc-test

Documentation/prctl/Makefile

@@ -0,0 +1,8 @@
+# List of programs to build
+hostprogs-y := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_disable-tsc-ctxt-sw-stress-test.o += -I$(objtree)/usr/include
+HOSTCFLAGS_disable-tsc-on-off-stress-test.o += -I$(objtree)/usr/include
+HOSTCFLAGS_disable-tsc-test.o += -I$(objtree)/usr/include

Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c

@@ -27,19 +27,20 @@
 # define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
 #endif
 
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
 uint32_t lo, hi;
 /* We cannot use "=A", since this would use %rax on x86_64 */
 __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
 return (uint64_t)hi << 32 | lo;
 }
 
-void sigsegv_expect(int sig)
+static void sigsegv_expect(int sig)
 {
 	/* */
 }
 
-void segvtask(void)
+static void segvtask(void)
 {
 	if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
 	{
@@ -54,13 +55,13 @@ void segvtask(void)
 }
 
 
-void sigsegv_fail(int sig)
+static void sigsegv_fail(int sig)
 {
 	fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
 	exit(0);
 }
 
-void rdtsctask(void)
+static void rdtsctask(void)
 {
 	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
 	{

Documentation/prctl/disable-tsc-on-off-stress-test.c

@@ -29,7 +29,8 @@
 
 /* snippet from wikipedia :-) */
 
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
 uint32_t lo, hi;
 /* We cannot use "=A", since this would use %rax on x86_64 */
 __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
@@ -38,7 +39,7 @@ return (uint64_t)hi << 32 | lo;
 
 int should_segv = 0;
 
-void sigsegv_cb(int sig)
+static void sigsegv_cb(int sig)
 {
 	if (!should_segv)
 	{
@@ -55,7 +56,7 @@ void sigsegv_cb(int sig)
 	rdtsc();
 }
 
-void task(void)
+static void task(void)
 {
 	signal(SIGSEGV, sigsegv_cb);
 	alarm(10);

Documentation/prctl/disable-tsc-test.c

@@ -29,14 +29,15 @@ const char *tsc_names[] =
 	[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
 };
 
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
 uint32_t lo, hi;
 /* We cannot use "=A", since this would use %rax on x86_64 */
 __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
 return (uint64_t)hi << 32 | lo;
 }
 
-void sigsegv_cb(int sig)
+static void sigsegv_cb(int sig)
 {
 	int tsc_val = 0;
 

Documentation/ptp/.gitignore

@@ -0,0 +1 @@
+testptp

Documentation/ptp/Makefile

@@ -0,0 +1,8 @@
+# List of programs to build
+hostprogs-y := testptp
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_testptp.o += -I$(objtree)/usr/include
+HOSTLOADLIBES_testptp := -lrt

Documentation/ptp/testptp.c

@@ -500,11 +500,11 @@ int main(int argc, char *argv[])
 			interval = t2 - t1;
 			offset = (t2 + t1) / 2 - tp;
 
-			printf("system time: %" PRId64 ".%u\n",
+			printf("system time: %lld.%u\n",
 				(pct+2*i)->sec, (pct+2*i)->nsec);
-			printf("phc    time: %" PRId64 ".%u\n",
+			printf("phc    time: %lld.%u\n",
 				(pct+2*i+1)->sec, (pct+2*i+1)->nsec);
-			printf("system time: %" PRId64 ".%u\n",
+			printf("system time: %lld.%u\n",
 				(pct+2*i+2)->sec, (pct+2*i+2)->nsec);
 			printf("system/phc clock time offset is %" PRId64 " ns\n"
 			       "system     clock time delay  is %" PRId64 " ns\n",

Documentation/ptp/testptp.mk

@@ -1,33 +0,0 @@
-# PTP 1588 clock support - User space test program
-#
-# Copyright (C) 2010 OMICRON electronics GmbH
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-CC        = $(CROSS_COMPILE)gcc
-INC       = -I$(KBUILD_OUTPUT)/usr/include
-CFLAGS    = -Wall $(INC)
-LDLIBS    = -lrt
-PROGS     = testptp
-
-all: $(PROGS)
-
-testptp: testptp.o
-
-clean:
-	rm -f testptp.o
-
-distclean: clean
-	rm -f $(PROGS)

Documentation/spi/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-y := spidev_test spidev_fdx
 

Documentation/this_cpu_ops.txt

@@ -41,7 +41,6 @@ The following this_cpu() operations with implied preemption protection
 are defined. These operations can be used without worrying about
 preemption and interrupts.
 
-	this_cpu_add()
 	this_cpu_read(pcp)
 	this_cpu_write(pcp, val)
 	this_cpu_add(pcp, val)
@@ -225,7 +224,6 @@ still occur while an operation is in progress and if the interrupt too
 modifies the variable, then RMW actions can not be guaranteed to be
 safe.
 
-	__this_cpu_add()
 	__this_cpu_read(pcp)
 	__this_cpu_write(pcp, val)
 	__this_cpu_add(pcp, val)

Documentation/timers/.gitignore

@@ -0,0 +1 @@
+hpet_example

Documentation/timers/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-$(CONFIG_X86) := hpet_example
 

Documentation/vDSO/.gitignore

@@ -0,0 +1,2 @@
+vdso_test
+vdso_standalone_test_x86

Documentation/vDSO/Makefile

@@ -0,0 +1,12 @@
+# vdso_test won't build for glibc < 2.16, so disable it
+# hostprogs-y := vdso_test
+hostprogs-$(CONFIG_X86) := vdso_standalone_test_x86
+vdso_standalone_test_x86-objs := vdso_standalone_test_x86.o parse_vdso.o
+vdso_test-objs := parse_vdso.o vdso_test.o
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99
+HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector
+HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib

Documentation/video4linux/.gitignore

@@ -1 +0,0 @@
-v4lgrab

Documentation/video4linux/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_VIDEO_PCI_SKELETON) := v4l2-pci-skeleton.o

Documentation/watchdog/Makefile

@@ -0,0 +1 @@
+subdir-y := src

Documentation/watchdog/src/Makefile

@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
 # List of programs to build
 hostprogs-y := watchdog-simple watchdog-test
 

MAINTAINERS

@@ -3018,6 +3018,7 @@ F:	Documentation/
 X:	Documentation/ABI/
 X:	Documentation/devicetree/
 X:	Documentation/[a-z][a-z]_[A-Z][A-Z]/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/doc.git
 
 DOUBLETALK DRIVER
 M:	"James R. Van Zandt" <jrv@vanzandt.mv.com>

Makefile

@@ -1547,6 +1547,8 @@ endif
 	$(cmd_crmodverdir)
 	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
 	$(build)=$(build-dir)
+# Make sure the latest headers are built for Documentation
+Documentation/: headers_install
 %/: prepare scripts FORCE
 	$(cmd_crmodverdir)
 	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \

drivers/media/rc/keymaps/Kconfig

@@ -12,4 +12,4 @@ config RC_MAP
 	   The ir-keytable program, available at v4l-utils package
 	   provide the tool and the same RC maps for load from
 	   userspace. Its available at
-			http://git.linuxtv.org/v4l-utils
+		http://git.linuxtv.org/cgit.cgi/v4l-utils.git/

drivers/media/v4l2-core/Kconfig

@@ -25,6 +25,15 @@ config VIDEO_FIXED_MINOR_RANGES
 
 	  When in doubt, say N.
 
+config VIDEO_PCI_SKELETON
+	tristate "Skeleton PCI V4L2 driver"
+	depends on PCI && BUILD_DOCSRC
+	depends on VIDEO_V4L2 && VIDEOBUF2_CORE
+	depends on VIDEOBUF2_MEMOPS && VIDEOBUF2_DMA_CONTIG
+	---help---
+	  Enable build of the skeleton PCI driver, used as a reference
+	  when developing new drivers.
+
 # Used by drivers that need tuner.ko
 config VIDEO_TUNER
 	tristate

tools/include/tools/endian.h

@@ -0,0 +1,56 @@
+#ifndef _TOOLS_ENDIAN_H
+#define _TOOLS_ENDIAN_H
+
+#include <byteswap.h>
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+
+#ifndef htole16
+#define htole16(x) (x)
+#endif
+#ifndef htole32
+#define htole32(x) (x)
+#endif
+#ifndef htole64
+#define htole64(x) (x)
+#endif
+
+#ifndef le16toh
+#define le16toh(x) (x)
+#endif
+
+#ifndef le32toh
+#define le32toh(x) (x)
+#endif
+
+#ifndef le64toh
+#define le64toh(x) (x)
+#endif
+
+#else /* __BYTE_ORDER */
+
+#ifndef htole16
+#define htole16(x) __bswap_16(x)
+#endif
+#ifndef htole32
+#define htole32(x) __bswap_32(x)
+#endif
+#ifndef htole64
+#define htole64(x) __bswap_64(x)
+#endif
+
+#ifndef le16toh
+#define le16toh(x) __bswap_16(x)
+#endif
+
+#ifndef le32toh
+#define le32toh(x) __bswap_32(x)
+#endif
+
+#ifndef le64toh
+#define le64toh(x) __bswap_64(x)
+#endif
+
+#endif
+
+#endif /* _TOOLS_ENDIAN_H */