ktest: Have all values be set by defaults

Currently the patchcheck, bisect, and config_bisect variables
are only able to be set per test. You can not set a default
value for them.

By letting default values be set, it makes some config files
a bit easier, and also makes it easier to find typos in the
option names.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This commit is contained in:
Steven Rostedt 2011-12-22 21:33:55 -05:00 committed by Steven Rostedt
parent 4f43e0dcaf
commit b5f4aea687

View File

@ -103,7 +103,7 @@ my $output_minconfig;
my $ignore_config;
my $addconfig;
my $in_bisect = 0;
my $bisect_bad = "";
my $bisect_bad_commit = "";
my $reverse_bisect;
my $bisect_manual;
my $bisect_skip;
@ -140,10 +140,27 @@ my $stop_after_failure;
my $stop_test_after;
my $build_target;
my $target_image;
my $checkout;
my $localversion;
my $iteration = 0;
my $successes = 0;
my $bisect_good;
my $bisect_bad;
my $bisect_type;
my $bisect_start;
my $bisect_replay;
my $bisect_files;
my $bisect_reverse;
my $bisect_check;
my $config_bisect;
my $config_bisect_type;
my $patchcheck_type;
my $patchcheck_start;
my $patchcheck_end;
# set when a test is something other that just building or install
# which would require more options.
my $buildonly = 1;
@ -1940,7 +1957,7 @@ sub run_git_bisect {
if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
doprint "$1 [$2]\n";
} elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
$bisect_bad = $1;
$bisect_bad_commit = $1;
doprint "Found bad commit... $1\n";
return 0;
} else {
@ -2050,16 +2067,16 @@ sub bisect {
my $result;
die "BISECT_GOOD[$i] not defined\n" if (!defined($opt{"BISECT_GOOD[$i]"}));
die "BISECT_BAD[$i] not defined\n" if (!defined($opt{"BISECT_BAD[$i]"}));
die "BISECT_TYPE[$i] not defined\n" if (!defined($opt{"BISECT_TYPE[$i]"}));
die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
my $good = $opt{"BISECT_GOOD[$i]"};
my $bad = $opt{"BISECT_BAD[$i]"};
my $type = $opt{"BISECT_TYPE[$i]"};
my $start = $opt{"BISECT_START[$i]"};
my $replay = $opt{"BISECT_REPLAY[$i]"};
my $start_files = $opt{"BISECT_FILES[$i]"};
my $good = $bisect_good;
my $bad = $bisect_bad;
my $type = $bisect_type;
my $start = $bisect_start;
my $replay = $bisect_replay;
my $start_files = $bisect_files;
if (defined($start_files)) {
$start_files = " -- " . $start_files;
@ -2071,8 +2088,7 @@ sub bisect {
$good = get_sha1($good);
$bad = get_sha1($bad);
if (defined($opt{"BISECT_REVERSE[$i]"}) &&
$opt{"BISECT_REVERSE[$i]"} == 1) {
if (defined($bisect_reverse) && $bisect_reverse == 1) {
doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
$reverse_bisect = 1;
} else {
@ -2087,7 +2103,7 @@ sub bisect {
# Check if a bisect was running
my $bisect_start_file = "$builddir/.git/BISECT_START";
my $check = $opt{"BISECT_CHECK[$i]"};
my $check = $bisect_check;
my $do_check = defined($check) && $check ne "0";
if ( -f $bisect_start_file ) {
@ -2173,7 +2189,7 @@ sub bisect {
run_command "git bisect reset" or
dodie "could not reset git bisect";
doprint "Bad commit was [$bisect_bad]\n";
doprint "Bad commit was [$bisect_bad_commit]\n";
success $i;
}
@ -2329,7 +2345,7 @@ sub run_config_bisect {
}
doprint "***** RUN TEST ***\n";
my $type = $opt{"CONFIG_BISECT_TYPE[$iteration]"};
my $type = $config_bisect_type;
my $ret;
my %current_config;
@ -2433,7 +2449,7 @@ sub run_config_bisect {
sub config_bisect {
my ($i) = @_;
my $start_config = $opt{"CONFIG_BISECT[$i]"};
my $start_config = $config_bisect;
my $tmpconfig = "$tmpdir/use_config";
@ -2553,22 +2569,22 @@ sub patchcheck {
my ($i) = @_;
die "PATCHCHECK_START[$i] not defined\n"
if (!defined($opt{"PATCHCHECK_START[$i]"}));
if (!defined($patchcheck_start));
die "PATCHCHECK_TYPE[$i] not defined\n"
if (!defined($opt{"PATCHCHECK_TYPE[$i]"}));
if (!defined($patchcheck_type));
my $start = $opt{"PATCHCHECK_START[$i]"};
my $start = $patchcheck_start;
my $end = "HEAD";
if (defined($opt{"PATCHCHECK_END[$i]"})) {
$end = $opt{"PATCHCHECK_END[$i]"};
if (defined($patchcheck_end)) {
$end = $patchcheck_end;
}
# Get the true sha1's since we can use things like HEAD~3
$start = get_sha1($start);
$end = get_sha1($end);
my $type = $opt{"PATCHCHECK_TYPE[$i]"};
my $type = $patchcheck_type;
# Can't have a test without having a test to run
if ($type eq "test" && !defined($run_test)) {
@ -3366,9 +3382,26 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$build_target = set_test_option("BUILD_TARGET", $i);
$ssh_exec = set_test_option("SSH_EXEC", $i);
$scp_to_target = set_test_option("SCP_TO_TARGET", $i);
$checkout = set_test_option("CHECKOUT", $i);
$target_image = set_test_option("TARGET_IMAGE", $i);
$localversion = set_test_option("LOCALVERSION", $i);
$bisect_good = set_test_option("BISECT_GOOD", $i);
$bisect_bad = set_test_option("BISECT_BAD", $i);
$bisect_type = set_test_option("BISECT_TYPE", $i);
$bisect_start = set_test_option("BISECT_START", $i);
$bisect_replay = set_test_option("BISECT_REPLAY", $i);
$bisect_files = set_test_option("BISECT_FILES", $i);
$bisect_reverse = set_test_option("BISECT_REVERSE", $i);
$bisect_check = set_test_option("BISECT_CHECK", $i);
$config_bisect = set_test_option("CONFIG_BISECT", $i);
$config_bisect_type = set_test_option("CONFIG_BISECT_TYPE", $i);
$patchcheck_type = set_test_option("PATCHCHECK_TYPE", $i);
$patchcheck_start = set_test_option("PATCHCHECK_START", $i);
$patchcheck_end = set_test_option("PATCHCHECK_END", $i);
$start_minconfig_defined = 1;
if (!defined($start_minconfig)) {
@ -3405,11 +3438,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
my $run_type = $build_type;
if ($test_type eq "patchcheck") {
$run_type = $opt{"PATCHCHECK_TYPE[$i]"};
$run_type = $patchcheck_type;
} elsif ($test_type eq "bisect") {
$run_type = $opt{"BISECT_TYPE[$i]"};
$run_type = $bisect_type;
} elsif ($test_type eq "config_bisect") {
$run_type = $opt{"CONFIG_BISECT_TYPE[$i]"};
$run_type = $config_bisect_type;
}
if ($test_type eq "make_min_config") {
@ -3441,7 +3474,6 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$minconfig = "$tmpdir/add_config";
}
my $checkout = $opt{"CHECKOUT[$i]"};
if (defined($checkout)) {
run_command "git checkout $checkout" or
die "failed to checkout $checkout";