forked from Minki/linux
ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Gary Bisson
Shawn Guo
parent
4629cb7f47
commit
b32e700256
@ -313,6 +313,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
||||
imx6q-gw552x.dtb \
|
||||
imx6q-hummingboard.dtb \
|
||||
imx6q-nitrogen6x.dtb \
|
||||
imx6q-nitrogen6_max.dtb \
|
||||
imx6q-phytec-pbab01.dtb \
|
||||
imx6q-rex-pro.dtb \
|
||||
imx6q-sabreauto.dtb \
|
||||
|
||||
53
arch/arm/boot/dts/imx6q-nitrogen6_max.dts
Normal file
53
arch/arm/boot/dts/imx6q-nitrogen6_max.dts
Normal file
@ -0,0 +1,53 @@
|
||||
/*
|
||||
* Copyright 2015 Boundary Devices, Inc.
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-nitrogen6_max.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
|
||||
compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
873
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
Normal file
873
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
Normal file
@ -0,0 +1,873 @@
|
||||
/*
|
||||
* Copyright 2015 Boundary Devices, Inc.
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0xF0000000>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg_1p8v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "1P8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_2p5v: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "2P5V";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usb_h1_vbus: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbh1>;
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_wlan_vmmc: regulator@5 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <5>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wlan_vmmc>;
|
||||
regulator-name = "reg_wlan_vmmc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_can_xcvr: regulator@6 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <6>;
|
||||
regulator-name = "CAN XCVR";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can_xcvr>;
|
||||
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_keys>;
|
||||
|
||||
power {
|
||||
label = "Power Button";
|
||||
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
menu {
|
||||
label = "Menu";
|
||||
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_MENU>;
|
||||
};
|
||||
|
||||
home {
|
||||
label = "Home";
|
||||
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_HOME>;
|
||||
};
|
||||
|
||||
back {
|
||||
label = "Back";
|
||||
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_BACK>;
|
||||
};
|
||||
|
||||
volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
volume-down {
|
||||
label = "Volume Down";
|
||||
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
};
|
||||
|
||||
i2cmux@2 {
|
||||
compatible = "i2c-mux-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
|
||||
&gpio4 15 GPIO_ACTIVE_HIGH>;
|
||||
i2c-parent = <&i2c2>;
|
||||
idle-state = <0>;
|
||||
|
||||
i2c2@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
i2c2@2 {
|
||||
reg = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2cmux@3 {
|
||||
compatible = "i2c-mux-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
|
||||
i2c-parent = <&i2c3>;
|
||||
idle-state = <0>;
|
||||
|
||||
i2c3@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
speaker-enable {
|
||||
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
||||
retain-state-suspended;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
ttymxc4-rs232 {
|
||||
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
|
||||
retain-state-suspended;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
backlight_lcd: backlight_lcd {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <7>;
|
||||
power-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
backlight_lvds0: backlight_lvds0 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm4 0 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <7>;
|
||||
power-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
backlight_lvds1: backlight_lvds1 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm2 0 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <7>;
|
||||
power-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
lcd_display: display@di0 {
|
||||
compatible = "fsl,imx-parallel-display";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interface-pix-fmt = "bgr666";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_j15>;
|
||||
status = "okay";
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
lcd_display_in: endpoint {
|
||||
remote-endpoint = <&ipu1_di0_disp0>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
lcd_display_out: endpoint {
|
||||
remote-endpoint = <&lcd_panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel_lcd {
|
||||
compatible = "okaya,rs800480t-7x0gp";
|
||||
backlight = <&backlight_lcd>;
|
||||
|
||||
port {
|
||||
lcd_panel_in: endpoint {
|
||||
remote-endpoint = <&lcd_display_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel_lvds0 {
|
||||
compatible = "hannstar,hsd100pxn1";
|
||||
backlight = <&backlight_lvds0>;
|
||||
|
||||
port {
|
||||
panel_in_lvds0: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel_lvds1 {
|
||||
compatible = "hannstar,hsd100pxn1";
|
||||
backlight = <&backlight_lvds1>;
|
||||
|
||||
port {
|
||||
panel_in_lvds1: endpoint {
|
||||
remote-endpoint = <&lvds1_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
|
||||
"fsl,imx-audio-sgtl5000";
|
||||
model = "imx6q-nitrogen6_max-sgtl5000";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sgtl5000>;
|
||||
ssi-controller = <&ssi1>;
|
||||
audio-codec = <&codec>;
|
||||
audio-routing =
|
||||
"MIC_IN", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"Headphone Jack", "HP_OUT";
|
||||
mux-int-port = <1>;
|
||||
mux-ext-port = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can1>;
|
||||
xceiver-supply = <®_can_xcvr>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&clks {
|
||||
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
||||
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
|
||||
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
||||
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
fsl,spi-num-chipselects = <1>;
|
||||
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi1>;
|
||||
status = "okay";
|
||||
|
||||
flash: m25p80@0 {
|
||||
compatible = "microchip,sst25vf016b";
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
||||
txen-skew-ps = <0>;
|
||||
txc-skew-ps = <3000>;
|
||||
rxdv-skew-ps = <0>;
|
||||
rxc-skew-ps = <3000>;
|
||||
rxd0-skew-ps = <0>;
|
||||
rxd1-skew-ps = <0>;
|
||||
rxd2-skew-ps = <0>;
|
||||
rxd3-skew-ps = <0>;
|
||||
txd0-skew-ps = <0>;
|
||||
txd1-skew-ps = <0>;
|
||||
txd2-skew-ps = <0>;
|
||||
txd3-skew-ps = <0>;
|
||||
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
codec: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
clocks = <&clks 201>;
|
||||
VDDA-supply = <®_2p5v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
};
|
||||
|
||||
rtc: rtc@68 {
|
||||
compatible = "st,rv4162";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rv4162>;
|
||||
reg = <0x68>;
|
||||
interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
touchscreen@04 {
|
||||
compatible = "eeti,egalax_ts";
|
||||
reg = <0x04>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
|
||||
wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
touchscreen@38 {
|
||||
compatible = "edt,edt-ft5x06";
|
||||
reg = <0x38>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
imx6q-nitrogen6_max {
|
||||
pinctrl_audmux: audmuxgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
||||
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_can1: can1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
|
||||
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_can_xcvr: can-xcvrgrp {
|
||||
fsl,pins = <
|
||||
/* Flexcan XCVR enable */
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi1: ecspi1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
||||
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
||||
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
||||
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
||||
/* Phy reset */
|
||||
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0
|
||||
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
|
||||
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_keys: gpio_keysgrp {
|
||||
fsl,pins = <
|
||||
/* Power Button */
|
||||
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
|
||||
/* Menu Button */
|
||||
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
|
||||
/* Home Button */
|
||||
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
|
||||
/* Back Button */
|
||||
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
|
||||
/* Volume Up Button */
|
||||
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
|
||||
/* Volume Down Button */
|
||||
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2mux: i2c2muxgrp {
|
||||
fsl,pins = <
|
||||
/* ov5642 camera i2c enable */
|
||||
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0
|
||||
/* ov5640_mipi camera i2c enable */
|
||||
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3mux: i2c3muxgrp {
|
||||
fsl,pins = <
|
||||
/* PCIe I2C enable */
|
||||
MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_j15: j15grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
|
||||
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
|
||||
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
|
||||
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
|
||||
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
|
||||
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
|
||||
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
|
||||
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
|
||||
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
|
||||
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
|
||||
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
|
||||
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
|
||||
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
|
||||
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
|
||||
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
|
||||
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
|
||||
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
|
||||
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
|
||||
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
|
||||
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
|
||||
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
|
||||
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
|
||||
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
|
||||
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
|
||||
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
|
||||
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
|
||||
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
|
||||
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pcie: pciegrp {
|
||||
fsl,pins = <
|
||||
/* PCIe reset */
|
||||
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm2: pwm2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm3: pwm3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm4: pwm4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_rv4162: rv4162grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_sgtl5000: sgtl5000grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
|
||||
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
|
||||
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart5: uart5grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1
|
||||
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1
|
||||
/* RS485 RX Enable: pull up */
|
||||
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1
|
||||
/* RS485 DEN: pull down */
|
||||
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1
|
||||
/* RS485/!RS232 Select: pull down (rs232) */
|
||||
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1
|
||||
/* ON: pull down */
|
||||
MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbh1: usbh1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||||
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
|
||||
/* power enable, high active */
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||||
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0
|
||||
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc4: usdhc4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
||||
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
||||
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
||||
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
||||
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
||||
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
||||
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
||||
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
||||
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
||||
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wlan_vmmc: wlan_vmmcgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
|
||||
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
|
||||
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0
|
||||
MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ipu1_di0_disp0 {
|
||||
remote-endpoint = <&lcd_display_in>;
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds-channel@0 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in_lvds0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lvds-channel@1 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds1_out: endpoint {
|
||||
remote-endpoint = <&panel_in_lvds1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pcie>;
|
||||
reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
vbus-supply = <®_usb_h1_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
vmmc-supply = <®_wlan_vmmc>;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1271";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ref-clock-frequency = <38400000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc4>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
vmmc-supply = <®_1p8v>;
|
||||
keep-power-in-suspend;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user