leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

wl12xx: Modify memory configuration for 128x/AP

Browse Source 
The 128x/AP firmware does not yet support dynamic memory. Temporarily,
the memory configuration for the 127x was used both for 127x/AP as well
as 128x/AP. Since the two chips don't have the same number of memory
blocks, TP was significantly degraded.

This hasn't been fine tuned yet, but using the base 128x numbers
(without dynamic memory) seems to yield much better results (around 30%
more). Additional fine tuning will be required in the future.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
This commit is contained in:
Ido Yariv 2011-04-18 16:40:14 +03:00 committed by Luciano Coelho
parent 1fe9e2464c
commit ae825e4ba8
1 changed files with 15 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/net/wireless/wl12xx/acx.c
View File

@ -954,6 +954,7 @@ out:
int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
{
struct wl1271_acx_ap_config_memory *mem_conf;
struct conf_memory_settings *mem;
int ret;
wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
@ -964,14 +965,21 @@ int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
goto out;
}
if (wl->chip.id == CHIP_ID_1283_PG20)
/*
* FIXME: The 128x AP FW does not yet support dynamic memory.
* Use the base memory configuration for 128x for now. This
* should be fine tuned in the future.
*/
mem = &wl->conf.mem_wl128x;
else
mem = &wl->conf.mem_wl127x;
/* memory config */
/* FIXME: for now we always use mem_wl127x for AP, because it
* doesn't support dynamic memory and we don't have the
* optimal values for wl128x without dynamic memory yet */
mem_conf->num_stations = wl->conf.mem_wl127x.num_stations;
mem_conf->rx_mem_block_num = wl->conf.mem_wl127x.rx_block_num;
mem_conf->tx_min_mem_block_num = wl->conf.mem_wl127x.tx_min_block_num;
mem_conf->num_ssid_profiles = wl->conf.mem_wl127x.ssid_profiles;
mem_conf->num_stations = mem->num_stations;
mem_conf->rx_mem_block_num = mem->rx_block_num;
mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
mem_conf->num_ssid_profiles = mem->ssid_profiles;
mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,