pinctrl: abx500: suppress hardcoded value

Replace hardcoded value by corresponding #define's.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Patrice Chotard 2013-06-24 14:41:45 +02:00 committed by Linus Walleij
parent 8b5abd18e2
commit acd260b0aa

View File

@ -96,6 +96,9 @@
#define AB8540_GPIOX_VBAT_START 51
#define AB8540_GPIOX_VBAT_END 54
#define ABX500_GPIO_INPUT 0
#define ABX500_GPIO_OUTPUT 1
struct abx500_pinctrl {
struct device *dev;
struct pinctrl_dev *pctldev;
@ -286,12 +289,18 @@ static int abx500_gpio_direction_output(struct gpio_chip *chip,
int ret;
/* set direction as output */
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
ret = abx500_gpio_set_bits(chip,
AB8500_GPIO_DIR1_REG,
offset,
ABX500_GPIO_OUTPUT);
if (ret < 0)
return ret;
/* disable pull down */
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
ret = abx500_gpio_set_bits(chip,
AB8500_GPIO_PUD1_REG,
offset,
ABX500_GPIO_PULL_NONE);
if (ret < 0)
return ret;
@ -312,7 +321,10 @@ static int abx500_gpio_direction_output(struct gpio_chip *chip,
static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
/* set the register as input */
return abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
return abx500_gpio_set_bits(chip,
AB8500_GPIO_DIR1_REG,
offset,
ABX500_GPIO_INPUT);
}
static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
@ -1032,7 +1044,8 @@ static int abx500_pin_config_set(struct pinctrl_dev *pctldev,
else
/* Chip only supports pull down */
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG,
offset, argument ? 0 : 1);
offset,
argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE);
break;
case PIN_CONFIG_BIAS_PULL_UP: